1.\" Copyright (c) 2004 Daniel Hartmeier
2.\" All rights reserved.
3.\"
4.\" Redistribution and use in source and binary forms, with or without
5.\" modification, are permitted provided that the following conditions
6.\" are met:
7.\"
8.\" - Redistributions of source code must retain the above copyright
9.\" notice, this list of conditions and the following disclaimer.
10.\" - Redistributions in binary form must reproduce the above
11.\" copyright notice, this list of conditions and the following
12.\" disclaimer in the documentation and/or other materials provided
13.\" with the distribution.
14.\"
15.\" THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
16.\" "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
17.\" LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
18.\" FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
19.\" COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
20.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
21.\" BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
22.\" LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
23.\" CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
24.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
25.\" ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
26.\" POSSIBILITY OF SUCH DAMAGE.
27.\"
28.\" $NetBSD: cdce.4,v 1.4 2004/12/08 18:35:56 peter Exp $
29.\" $FreeBSD: head/share/man/man4/cdce.4 148145 2005-07-19 00:26:30Z trhodes $
30.\"
31.Dd July 16, 2005
32.Dt CDCE 4
33.Os
34.Sh NAME
35.Nm cdce
36.Nd "USB Communication Device Class Ethernet driver"
37.Sh SYNOPSIS
38To compile support for the
39.Nm
40driver into your kernel, place the following lines in your kernel configuration
41file:
42.Bd -ragged -offset indent
43.Cd "device uhci"
44.Cd "device ohci"
45.Cd "device usb"
46.Cd "device cdce"
47.Ed
48.Pp
49Alternatively, to load the
50.Nm
51driver at boot time, place the following line in
52.Xr loader.conf 5 :
53.Bd -literal -offset indent
54if_cdce_load="YES"
55.Ed
56.Sh DESCRIPTION
57The
58.Nm
59driver provides support for USB Host-to-Host (aka USB-to-USB) and
60USB-to-Ethernet bridges based on the USB Communication Device Class
61(CDC) and Ethernet subclass, including the following:
62.Pp
63.Bl -bullet -compact
64.It
65Prolific PL-2501 Host-to-Host Bridge Controller
66.It
67Sharp Zaurus PDA
68.It
69Terayon TJ-715 DOCSIS Cable Modem
70.El
71.Pp
72The USB bridge appears as a regular network interface on both sides,
73transporting Ethernet frames.
74.Pp
75For more information on configuring this device, see
76.Xr ifconfig 8 .
77.Pp
78USB 1.x bridges support speeds of up to 12Mbps, and USB 2.0 speeds of
79up to 480Mbps.
80.Pp
81Packets are
82received and transmitted over separate USB bulk transfer endpoints.
83.Pp
84The
85.Nm
86driver does not support different media types or options.
87.Sh DIAGNOSTICS
88.Bl -diag
89.It "cdce%d: no union descriptor"
90The driver could not fetch an interface descriptor from the USB
91device.
92For a manually added USB vendor/product, the CDCE_NO_UNION flag
93can be tried to work around the missing descriptor.
94.It "cdce%d: no data interface"
95.It "cdce%d: could not read endpoint descriptor"
96.It "cdce%d: unexpected endpoint"
97.It "cdce%d: could not find data bulk in/out"
98For a manually added USB vendor/product, these errors indicate
99that the bridge is not compatible with the driver.
100.It "cdce%d: watchdog timeout"
101A packet was queued for transmission and a transmit command was
102issued, however the device failed to acknowledge the transmission
103before a timeout expired.
104.It "cdce%d: no memory for rx list -- packet dropped!"
105Memory allocation through MGETHDR or MCLGET failed, the system
106is running low on mbufs.
107.It "cdce%d: abort/close rx/tx pipe failed"
108.It "cdce%d: rx/tx list init failed"
109.It "cdce%d: open rx/tx pipe failed"
110.It "cdce%d: usb error on rx/tx"
111.El
112.Sh SEE ALSO
113.Xr arp 4 ,
114.Xr intro 4 ,
115.Xr netintro 4 ,
116.Xr usb 4 ,
117.\" .Xr hostname.if 5 ,
118.Xr ifconfig 8
119.Rs
120.%T "Universal Serial Bus Class Definitions for Communication Devices"
121.%O http://www.usb.org/developers/devclass_docs/usbcdc11.pdf
122.Re
123.Rs
124.%T "Data sheet Prolific PL-2501 Host-to-Host Bridge/Network Controller"
125.%O http://tech.prolific.com.tw/visitor/fcabdl.asp?fid=20679530
126.Re
127.Sh HISTORY
128The
129.Nm
130device driver first appeared in
131.Ox 3.6 ,
132.Nx 3.0
133and
134.Fx 6.0 .
135.Sh AUTHORS
136.An -nosplit
137The
138.Nm
139driver was written by
140.An Craig Boston Aq craig@tobuj.gank.org
141based on the
142.Xr aue 4
143driver written by
144.An Bill Paul Aq wpaul@windriver.com
145and ported to
146.Ox
147by
148.An Daniel Hartmeier Aq dhartmei@openbsd.org .
149.Sh CAVEATS
150Many USB devices notoriously fail to report their class and interfaces
151correctly.
152Undetected products might work flawlessly when their vendor and product IDs
153are added to the driver manually.
2.\" All rights reserved.
3.\"
4.\" Redistribution and use in source and binary forms, with or without
5.\" modification, are permitted provided that the following conditions
6.\" are met:
7.\"
8.\" - Redistributions of source code must retain the above copyright
9.\" notice, this list of conditions and the following disclaimer.
10.\" - Redistributions in binary form must reproduce the above
11.\" copyright notice, this list of conditions and the following
12.\" disclaimer in the documentation and/or other materials provided
13.\" with the distribution.
14.\"
15.\" THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
16.\" "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
17.\" LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
18.\" FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
19.\" COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
20.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
21.\" BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
22.\" LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
23.\" CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
24.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
25.\" ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
26.\" POSSIBILITY OF SUCH DAMAGE.
27.\"
28.\" $NetBSD: cdce.4,v 1.4 2004/12/08 18:35:56 peter Exp $
29.\" $FreeBSD: head/share/man/man4/cdce.4 148145 2005-07-19 00:26:30Z trhodes $
30.\"
31.Dd July 16, 2005
32.Dt CDCE 4
33.Os
34.Sh NAME
35.Nm cdce
36.Nd "USB Communication Device Class Ethernet driver"
37.Sh SYNOPSIS
38To compile support for the
39.Nm
40driver into your kernel, place the following lines in your kernel configuration
41file:
42.Bd -ragged -offset indent
43.Cd "device uhci"
44.Cd "device ohci"
45.Cd "device usb"
46.Cd "device cdce"
47.Ed
48.Pp
49Alternatively, to load the
50.Nm
51driver at boot time, place the following line in
52.Xr loader.conf 5 :
53.Bd -literal -offset indent
54if_cdce_load="YES"
55.Ed
56.Sh DESCRIPTION
57The
58.Nm
59driver provides support for USB Host-to-Host (aka USB-to-USB) and
60USB-to-Ethernet bridges based on the USB Communication Device Class
61(CDC) and Ethernet subclass, including the following:
62.Pp
63.Bl -bullet -compact
64.It
65Prolific PL-2501 Host-to-Host Bridge Controller
66.It
67Sharp Zaurus PDA
68.It
69Terayon TJ-715 DOCSIS Cable Modem
70.El
71.Pp
72The USB bridge appears as a regular network interface on both sides,
73transporting Ethernet frames.
74.Pp
75For more information on configuring this device, see
76.Xr ifconfig 8 .
77.Pp
78USB 1.x bridges support speeds of up to 12Mbps, and USB 2.0 speeds of
79up to 480Mbps.
80.Pp
81Packets are
82received and transmitted over separate USB bulk transfer endpoints.
83.Pp
84The
85.Nm
86driver does not support different media types or options.
87.Sh DIAGNOSTICS
88.Bl -diag
89.It "cdce%d: no union descriptor"
90The driver could not fetch an interface descriptor from the USB
91device.
92For a manually added USB vendor/product, the CDCE_NO_UNION flag
93can be tried to work around the missing descriptor.
94.It "cdce%d: no data interface"
95.It "cdce%d: could not read endpoint descriptor"
96.It "cdce%d: unexpected endpoint"
97.It "cdce%d: could not find data bulk in/out"
98For a manually added USB vendor/product, these errors indicate
99that the bridge is not compatible with the driver.
100.It "cdce%d: watchdog timeout"
101A packet was queued for transmission and a transmit command was
102issued, however the device failed to acknowledge the transmission
103before a timeout expired.
104.It "cdce%d: no memory for rx list -- packet dropped!"
105Memory allocation through MGETHDR or MCLGET failed, the system
106is running low on mbufs.
107.It "cdce%d: abort/close rx/tx pipe failed"
108.It "cdce%d: rx/tx list init failed"
109.It "cdce%d: open rx/tx pipe failed"
110.It "cdce%d: usb error on rx/tx"
111.El
112.Sh SEE ALSO
113.Xr arp 4 ,
114.Xr intro 4 ,
115.Xr netintro 4 ,
116.Xr usb 4 ,
117.\" .Xr hostname.if 5 ,
118.Xr ifconfig 8
119.Rs
120.%T "Universal Serial Bus Class Definitions for Communication Devices"
121.%O http://www.usb.org/developers/devclass_docs/usbcdc11.pdf
122.Re
123.Rs
124.%T "Data sheet Prolific PL-2501 Host-to-Host Bridge/Network Controller"
125.%O http://tech.prolific.com.tw/visitor/fcabdl.asp?fid=20679530
126.Re
127.Sh HISTORY
128The
129.Nm
130device driver first appeared in
131.Ox 3.6 ,
132.Nx 3.0
133and
134.Fx 6.0 .
135.Sh AUTHORS
136.An -nosplit
137The
138.Nm
139driver was written by
140.An Craig Boston Aq craig@tobuj.gank.org
141based on the
142.Xr aue 4
143driver written by
144.An Bill Paul Aq wpaul@windriver.com
145and ported to
146.Ox
147by
148.An Daniel Hartmeier Aq dhartmei@openbsd.org .
149.Sh CAVEATS
150Many USB devices notoriously fail to report their class and interfaces
151correctly.
152Undetected products might work flawlessly when their vendor and product IDs
153are added to the driver manually.