1#!/bin/sh 2#- 3# Copyright (c) 2013-2015 The FreeBSD Foundation 4# Copyright (c) 2013 Glen Barber 5# Copyright (c) 2011 Nathan Whitehorn 6# All rights reserved. 7# 8# Portions of this software were developed by Glen Barber 9# under sponsorship from the FreeBSD Foundation. 10# 11# Redistribution and use in source and binary forms, with or without 12# modification, are permitted provided that the following conditions 13# are met: 14# 1. Redistributions of source code must retain the above copyright 15# notice, this list of conditions and the following disclaimer. 16# 2. Redistributions in binary form must reproduce the above copyright 17# notice, this list of conditions and the following disclaimer in the 18# documentation and/or other materials provided with the distribution. 19# 20# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 21# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 24# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 25# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 26# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 27# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 28# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 29# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 30# SUCH DAMAGE. 31# 32# release.sh: check out source trees, and build release components with 33# totally clean, fresh trees. 34# Based on release/generate-release.sh written by Nathan Whitehorn 35#
| 1#!/bin/sh 2#- 3# Copyright (c) 2013-2015 The FreeBSD Foundation 4# Copyright (c) 2013 Glen Barber 5# Copyright (c) 2011 Nathan Whitehorn 6# All rights reserved. 7# 8# Portions of this software were developed by Glen Barber 9# under sponsorship from the FreeBSD Foundation. 10# 11# Redistribution and use in source and binary forms, with or without 12# modification, are permitted provided that the following conditions 13# are met: 14# 1. Redistributions of source code must retain the above copyright 15# notice, this list of conditions and the following disclaimer. 16# 2. Redistributions in binary form must reproduce the above copyright 17# notice, this list of conditions and the following disclaimer in the 18# documentation and/or other materials provided with the distribution. 19# 20# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 21# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 24# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 25# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 26# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 27# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 28# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 29# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 30# SUCH DAMAGE. 31# 32# release.sh: check out source trees, and build release components with 33# totally clean, fresh trees. 34# Based on release/generate-release.sh written by Nathan Whitehorn 35#
|
36# $FreeBSD: head/release/release.sh 282500 2015-05-05 16:28:04Z gjb $
| 36# $FreeBSD: head/release/release.sh 282693 2015-05-09 21:08:12Z gjb $
|
37# 38
| 37# 38
|
39PATH="/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin" 40export PATH
| 39export PATH="/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin"
|
41
| 40
|
| 41VERSION=2 42
|
42# Prototypes that can be redefined per-chroot or per-target. 43load_chroot_env() { } 44load_target_env() { } 45buildenv_setup() { } 46
| 43# Prototypes that can be redefined per-chroot or per-target. 44load_chroot_env() { } 45load_target_env() { } 46buildenv_setup() { } 47
|
47# The directory within which the release will be built. 48CHROOTDIR="/scratch" 49RELENGDIR="$(realpath $(dirname $(basename ${0})))"
| 48usage() { 49 echo "Usage: $0 [-c release.conf]" 50 exit 1 51}
|
50
| 52
|
51# The default version control system command to obtain the sources. 52VCSCMD="svn checkout"
| 53# env_setup(): Set up the default build environment variables, such as the 54# CHROOTDIR, VCSCMD, SVNROOT, etc. This is called before the release.conf 55# file is sourced, if '-c <release.conf>' is specified. 56env_setup() { 57 # The directory within which the release will be built. 58 CHROOTDIR="/scratch" 59 RELENGDIR="$(dirname $(realpath ${0}))"
|
53
| 60
|
54# The default svn checkout server, and svn branches for src/, doc/, 55# and ports/. 56SVNROOT="svn://svn.FreeBSD.org/" 57SRCBRANCH="base/head@rHEAD" 58DOCBRANCH="doc/head@rHEAD" 59PORTBRANCH="ports/head@rHEAD"
| 61 # The default version control system command to obtain the sources. 62 for _dir in /usr/bin /usr/local/bin; do 63 for _svn in svn svnlite; do 64 [ -x "${_dir}/${_svn}" ] && VCSCMD="${_dir}/${_svn}" 65 [ ! -z "${VCSCMD}" ] && break 2 66 done 67 done 68 VCSCMD="${VCSCMD} checkout"
|
60
| 69
|
61# Set for embedded device builds. 62EMBEDDEDBUILD=
| 70 # The default svn checkout server, and svn branches for src/, doc/, 71 # and ports/. 72 SVNROOT="svn://svn.FreeBSD.org/" 73 SRCBRANCH="base/head@rHEAD" 74 DOCBRANCH="doc/head@rHEAD" 75 PORTBRANCH="ports/head@rHEAD"
|
63
| 76
|
64# Sometimes one needs to checkout src with --force svn option. 65# If custom kernel configs copied to src tree before checkout, e.g. 66SRC_FORCE_CHECKOUT=
| 77 # Set for embedded device builds. 78 EMBEDDEDBUILD=
|
67
| 79
|
68# The default make.conf and src.conf to use. Set to /dev/null 69# by default to avoid polluting the chroot(8) environment with 70# non-default settings. 71MAKE_CONF="/dev/null" 72SRC_CONF="/dev/null"
| 80 # Sometimes one needs to checkout src with --force svn option. 81 # If custom kernel configs copied to src tree before checkout, e.g. 82 SRC_FORCE_CHECKOUT=
|
73
| 83
|
74# The number of make(1) jobs, defaults to the number of CPUs available for 75# buildworld, and half of number of CPUs available for buildkernel. 76WORLD_FLAGS="-j$(sysctl -n hw.ncpu)" 77KERNEL_FLAGS="-j$(( $(( $(sysctl -n hw.ncpu) + 1 )) / 2))"
| 84 # The default make.conf and src.conf to use. Set to /dev/null 85 # by default to avoid polluting the chroot(8) environment with 86 # non-default settings. 87 MAKE_CONF="/dev/null" 88 SRC_CONF="/dev/null"
|
78
| 89
|
79MAKE_FLAGS="-s"
| 90 # The number of make(1) jobs, defaults to the number of CPUs available 91 # for buildworld, and half of number of CPUs available for buildkernel. 92 WORLD_FLAGS="-j$(sysctl -n hw.ncpu)" 93 KERNEL_FLAGS="-j$(( $(( $(sysctl -n hw.ncpu) + 1 )) / 2))"
|
80
| 94
|
81# The name of the kernel to build, defaults to GENERIC. 82KERNEL="GENERIC"
| 95 MAKE_FLAGS="-s"
|
83
| 96
|
84# Set to non-empty value to disable checkout of doc/ and/or ports/. Disabling 85# ports/ checkout also forces NODOC to be set. 86NODOC= 87NOPORTS=
| 97 # The name of the kernel to build, defaults to GENERIC. 98 KERNEL="GENERIC"
|
88
| 99
|
89# Set to non-empty value to build dvd1.iso as part of the release. 90WITH_DVD= 91WITH_COMPRESSED_IMAGES=
| 100 # Set to non-empty value to disable checkout of doc/ and/or ports/. 101 # Disabling ports/ checkout also forces NODOC to be set. 102 NODOC= 103 NOPORTS=
|
92
| 104
|
93# Set to non-empty value to build virtual machine images as part of 94# the release. 95WITH_VMIMAGES= 96WITH_COMPRESSED_VMIMAGES= 97XZ_THREADS=0
| 105 # Set to non-empty value to build dvd1.iso as part of the release. 106 WITH_DVD= 107 WITH_COMPRESSED_IMAGES=
|
98
| 108
|
99# Set to non-empty value to build virtual machine images for various 100# cloud providers as part of the release. 101WITH_CLOUDWARE=
| 109 # Set to non-empty value to build virtual machine images as part of 110 # the release. 111 WITH_VMIMAGES= 112 WITH_COMPRESSED_VMIMAGES= 113 XZ_THREADS=0
|
102
| 114
|
103usage() { 104 echo "Usage: $0 [-c release.conf]" 105 exit 1 106}
| 115 # Set to non-empty value to build virtual machine images for various 116 # cloud providers as part of the release. 117 WITH_CLOUDWARE=
|
107
| 118
|
108while getopts c: opt; do 109 case ${opt} in 110 c) 111 RELEASECONF="${OPTARG}" 112 if [ ! -e "${RELEASECONF}" ]; then 113 echo "ERROR: Configuration file ${RELEASECONF} does not exist." 114 exit 1 115 fi 116 # Source the specified configuration file for overrides 117 . ${RELEASECONF} 118 ;; 119 \?) 120 usage 121 ;;
| 119 return 0 120} # env_setup() 121 122# env_check(): Perform sanity tests on the build environment, such as ensuring 123# files/directories exist, as well as adding backwards-compatibility hacks if 124# necessary. This is called unconditionally, and overrides the defaults set 125# in env_setup() if '-c <release.conf>' is specified. 126env_check() { 127 chroot_build_release_cmd="chroot_build_release" 128 # Fix for backwards-compatibility with release.conf that does not have 129 # the trailing '/'. 130 case ${SVNROOT} in 131 *svn*) 132 SVNROOT="${SVNROOT}/" 133 ;; 134 *) 135 ;;
|
122 esac
| 136 esac
|
123done 124shift $(($OPTIND - 1))
| |
125
| 137
|
126# Fix for backwards-compatibility with release.conf that does not have the 127# trailing '/'. 128case ${SVNROOT} in 129 *svn*) 130 SVNROOT="${SVNROOT}/" 131 ;; 132 *) 133 ;; 134esac
| 138 # Prefix the branches with the SVNROOT for the full checkout URL. 139 SRCBRANCH="${SVNROOT}${SRCBRANCH}" 140 DOCBRANCH="${SVNROOT}${DOCBRANCH}" 141 PORTBRANCH="${SVNROOT}${PORTBRANCH}"
|
135
| 142
|
136# Prefix the branches with the SVNROOT for the full checkout URL. 137SRCBRANCH="${SVNROOT}${SRCBRANCH}" 138DOCBRANCH="${SVNROOT}${DOCBRANCH}" 139PORTBRANCH="${SVNROOT}${PORTBRANCH}"
| 143 if [ -n "${EMBEDDEDBUILD}" ]; then 144 WITH_DVD= 145 WITH_COMPRESSED_IMAGES= 146 NODOC=yes 147 case ${EMBEDDED_TARGET}:${EMBEDDED_TARGET_ARCH} in 148 arm:armv6) 149 chroot_build_release_cmd="chroot_arm_armv6_build_release" 150 ;; 151 *) 152 esac 153 fi
|
140
| 154
|
141if [ -n "${EMBEDDEDBUILD}" ]; then 142 WITH_DVD= 143 WITH_COMPRESSED_IMAGES= 144 NODOC=yes 145fi
| 155 # If PORTS is set and NODOC is unset, force NODOC=yes because the ports 156 # tree is required to build the documentation set. 157 if [ -n "${NOPORTS}" ] && [ -z "${NODOC}" ]; then 158 echo "*** NOTICE: Setting NODOC=1 since ports tree is required" 159 echo " and NOPORTS is set." 160 NODOC=yes 161 fi
|
146
| 162
|
147# If PORTS is set and NODOC is unset, force NODOC=yes because the ports tree 148# is required to build the documentation set. 149if [ -n "${NOPORTS}" ] && [ -z "${NODOC}" ]; then 150 echo "*** NOTICE: Setting NODOC=1 since ports tree is required" 151 echo " and NOPORTS is set." 152 NODOC=yes 153fi
| 163 # If NOPORTS and/or NODOC are unset, they must not pass to make as 164 # variables. The release makefile verifies definedness of the 165 # NOPORTS/NODOC variables instead of their values. 166 DOCPORTS= 167 if [ -n "${NOPORTS}" ]; then 168 DOCPORTS="NOPORTS=yes " 169 fi 170 if [ -n "${NODOC}" ]; then 171 DOCPORTS="${DOCPORTS}NODOC=yes" 172 fi
|
154
| 173
|
155# If NOPORTS and/or NODOC are unset, they must not pass to make as variables. 156# The release makefile verifies definedness of NOPORTS/NODOC variables 157# instead of their values. 158DOCPORTS= 159if [ -n "${NOPORTS}" ]; then 160 DOCPORTS="NOPORTS=yes " 161fi 162if [ -n "${NODOC}" ]; then 163 DOCPORTS="${DOCPORTS}NODOC=yes" 164fi
| 174 # The aggregated build-time flags based upon variables defined within 175 # this file, unless overridden by release.conf. In most cases, these 176 # will not need to be changed. 177 CONF_FILES="__MAKE_CONF=${MAKE_CONF} SRCCONF=${SRC_CONF}" 178 if [ -n "${TARGET}" ] && [ -n "${TARGET_ARCH}" ]; then 179 ARCH_FLAGS="TARGET=${TARGET} TARGET_ARCH=${TARGET_ARCH}" 180 else 181 ARCH_FLAGS= 182 fi 183 # Force src checkout if configured 184 FORCE_SRC_KEY= 185 if [ -n "${SRC_FORCE_CHECKOUT}" ]; then 186 FORCE_SRC_KEY="--force" 187 fi
|
165
| 188
|
166# The aggregated build-time flags based upon variables defined within 167# this file, unless overridden by release.conf. In most cases, these 168# will not need to be changed. 169CONF_FILES="__MAKE_CONF=${MAKE_CONF} SRCCONF=${SRC_CONF}" 170if [ -n "${TARGET}" ] && [ -n "${TARGET_ARCH}" ]; then 171 ARCH_FLAGS="TARGET=${TARGET} TARGET_ARCH=${TARGET_ARCH}" 172else 173 ARCH_FLAGS= 174fi 175load_chroot_env 176CHROOT_MAKEENV="${CHROOT_MAKEENV} MAKEOBJDIRPREFIX=${CHROOTDIR}/tmp/obj" 177CHROOT_WMAKEFLAGS="${MAKE_FLAGS} ${WORLD_FLAGS} ${CONF_FILES}" 178CHROOT_IMAKEFLAGS="${CONF_FILES}" 179CHROOT_DMAKEFLAGS="${CONF_FILES}" 180RELEASE_WMAKEFLAGS="${MAKE_FLAGS} ${WORLD_FLAGS} ${ARCH_FLAGS} ${CONF_FILES}" 181RELEASE_KMAKEFLAGS="${MAKE_FLAGS} ${KERNEL_FLAGS} KERNCONF=\"${KERNEL}\" ${ARCH_FLAGS} ${CONF_FILES}" 182RELEASE_RMAKEFLAGS="${ARCH_FLAGS} KERNCONF=\"${KERNEL}\" ${CONF_FILES} \ 183 ${DOCPORTS} WITH_DVD=${WITH_DVD} WITH_VMIMAGES=${WITH_VMIMAGES} \ 184 WITH_CLOUDWARE=${WITH_CLOUDWARE} XZ_THREADS=${XZ_THREADS}"
| 189 if [ -z "${CHROOTDIR}" ]; then 190 echo "Please set CHROOTDIR." 191 exit 1 192 fi
|
185
| 193
|
186# Force src checkout if configured 187FORCE_SRC_KEY= 188if [ -n "${SRC_FORCE_CHECKOUT}" ]; then 189 FORCE_SRC_KEY="--force" 190fi
| 194 if [ $(id -u) -ne 0 ]; then 195 echo "Needs to be run as root." 196 exit 1 197 fi
|
191
| 198
|
192if [ -z "${CHROOTDIR}" ]; then 193 echo "Please set CHROOTDIR." 194 exit 1 195fi
| 199 CHROOT_MAKEENV="${CHROOT_MAKEENV} \ 200 MAKEOBJDIRPREFIX=${CHROOTDIR}/tmp/obj" 201 CHROOT_WMAKEFLAGS="${MAKE_FLAGS} ${WORLD_FLAGS} ${CONF_FILES}" 202 CHROOT_IMAKEFLAGS="${CONF_FILES}" 203 CHROOT_DMAKEFLAGS="${CONF_FILES}" 204 RELEASE_WMAKEFLAGS="${MAKE_FLAGS} ${WORLD_FLAGS} ${ARCH_FLAGS} \ 205 ${CONF_FILES}" 206 RELEASE_KMAKEFLAGS="${MAKE_FLAGS} ${KERNEL_FLAGS} \ 207 KERNCONF=\"${KERNEL}\" ${ARCH_FLAGS} ${CONF_FILES}" 208 RELEASE_RMAKEFLAGS="${ARCH_FLAGS} \ 209 KERNCONF=\"${KERNEL}\" ${CONF_FILES} ${DOCPORTS} \ 210 WITH_DVD=${WITH_DVD} WITH_VMIMAGES=${WITH_VMIMAGES} \ 211 WITH_CLOUDWARE=${WITH_CLOUDWARE} XZ_THREADS=${XZ_THREADS}"
|
196
| 212
|
197if [ $(id -u) -ne 0 ]; then 198 echo "Needs to be run as root." 199 exit 1 200fi
| 213 return 0 214} # env_check()
|
201
| 215
|
202set -e # Everything must succeed
| 216# chroot_setup(): Prepare the build chroot environment for the release build. 217chroot_setup() { 218 load_chroot_env 219 mkdir -p ${CHROOTDIR}/usr
|
203
| 220
|
204mkdir -p ${CHROOTDIR}/usr
| 221 if [ -z "${SRC_UPDATE_SKIP}" ]; then 222 ${VCSCMD} ${FORCE_SRC_KEY} ${SRCBRANCH} ${CHROOTDIR}/usr/src 223 fi 224 if [ -z "${NODOC}" ] && [ -z "${DOC_UPDATE_SKIP}" ]; then 225 ${VCSCMD} ${DOCBRANCH} ${CHROOTDIR}/usr/doc 226 fi 227 if [ -z "${NOPORTS}" ] && [ -z "${PORTS_UPDATE_SKIP}" ]; then 228 ${VCSCMD} ${PORTBRANCH} ${CHROOTDIR}/usr/ports 229 fi
|
205
| 230
|
206if [ -z "${SRC_UPDATE_SKIP}" ]; then 207 ${VCSCMD} ${FORCE_SRC_KEY} ${SRCBRANCH} ${CHROOTDIR}/usr/src 208fi 209if [ -z "${NODOC}" ] && [ -z "${DOC_UPDATE_SKIP}" ]; then 210 ${VCSCMD} ${DOCBRANCH} ${CHROOTDIR}/usr/doc 211fi 212if [ -z "${NOPORTS}" ] && [ -z "${PORTS_UPDATE_SKIP}" ]; then 213 ${VCSCMD} ${PORTBRANCH} ${CHROOTDIR}/usr/ports 214fi
| 231 if [ -z "${CHROOTBUILD_SKIP}" ]; then 232 cd ${CHROOTDIR}/usr/src 233 env ${CHROOT_MAKEENV} make ${CHROOT_WMAKEFLAGS} buildworld 234 env ${CHROOT_MAKEENV} make ${CHROOT_IMAKEFLAGS} installworld \ 235 DESTDIR=${CHROOTDIR} 236 env ${CHROOT_MAKEENV} make ${CHROOT_DMAKEFLAGS} distribution \ 237 DESTDIR=${CHROOTDIR} 238 fi
|
215
| 239
|
216if [ -z "${CHROOTBUILD_SKIP}" ]; then 217 cd ${CHROOTDIR}/usr/src 218 env ${CHROOT_MAKEENV} make ${CHROOT_WMAKEFLAGS} buildworld 219 env ${CHROOT_MAKEENV} make ${CHROOT_IMAKEFLAGS} installworld \ 220 DESTDIR=${CHROOTDIR} 221 env ${CHROOT_MAKEENV} make ${CHROOT_DMAKEFLAGS} distribution \ 222 DESTDIR=${CHROOTDIR} 223fi 224mount -t devfs devfs ${CHROOTDIR}/dev 225cp /etc/resolv.conf ${CHROOTDIR}/etc/resolv.conf 226trap "umount ${CHROOTDIR}/dev" EXIT # Clean up devfs mount on exit
| 240 return 0 241} # chroot_setup()
|
227
| 242
|
228# If MAKE_CONF and/or SRC_CONF are set and not character devices (/dev/null), 229# copy them to the chroot. 230if [ -e ${MAKE_CONF} ] && [ ! -c ${MAKE_CONF} ]; then 231 mkdir -p ${CHROOTDIR}/$(dirname ${MAKE_CONF}) 232 cp ${MAKE_CONF} ${CHROOTDIR}/${MAKE_CONF} 233fi 234if [ -e ${SRC_CONF} ] && [ ! -c ${SRC_CONF} ]; then 235 mkdir -p ${CHROOTDIR}/$(dirname ${SRC_CONF}) 236 cp ${SRC_CONF} ${CHROOTDIR}/${SRC_CONF} 237fi
| 243# extra_chroot_setup(): Prepare anything additional within the build 244# necessary for the release build. 245extra_chroot_setup() { 246 mkdir -p ${CHROOTDIR}/dev 247 mount -t devfs devfs ${CHROOTDIR}/dev 248 [ -e /etc/resolv.conf ] && cp /etc/resolv.conf \ 249 ${CHROOTDIR}/etc/resolv.conf 250 # Run ldconfig(8) in the chroot directory so /var/run/ld-elf*.so.hints 251 # is created. This is needed by ports-mgmt/pkg. 252 eval chroot ${CHROOTDIR} /etc/rc.d/ldconfig forcerestart
|
238
| 253
|
239# Embedded builds do not use the 'make release' target. 240if [ -n "${EMBEDDEDBUILD}" ]; then
| 254 # If MAKE_CONF and/or SRC_CONF are set and not character devices 255 # (/dev/null), copy them to the chroot. 256 if [ -e ${MAKE_CONF} ] && [ ! -c ${MAKE_CONF} ]; then 257 mkdir -p ${CHROOTDIR}/$(dirname ${MAKE_CONF}) 258 cp ${MAKE_CONF} ${CHROOTDIR}/${MAKE_CONF} 259 fi 260 if [ -e ${SRC_CONF} ] && [ ! -c ${SRC_CONF} ]; then 261 mkdir -p ${CHROOTDIR}/$(dirname ${SRC_CONF}) 262 cp ${SRC_CONF} ${CHROOTDIR}/${SRC_CONF} 263 fi 264 265 if [ -d ${CHROOTDIR}/usr/ports ]; then 266 # Trick the ports 'run-autotools-fixup' target to do the right 267 # thing. 268 _OSVERSION=$(chroot ${CHROOTDIR} /usr/bin/uname -U) 269 REVISION=$(chroot ${CHROOTDIR} make -C /usr/src/release -V REVISION) 270 BRANCH=$(chroot ${CHROOTDIR} make -C /usr/src/release -V BRANCH) 271 UNAME_r=${REVISION}-${BRANCH} 272 if [ -d ${CHROOTDIR}/usr/doc ] && [ -z "${NODOC}" ]; then 273 PBUILD_FLAGS="OSVERSION=${_OSVERSION} BATCH=yes" 274 PBUILD_FLAGS="${PBUILD_FLAGS} UNAME_r=${UNAME_r}" 275 PBUILD_FLAGS="${PBUILD_FLAGS} OSREL=${REVISION}" 276 chroot ${CHROOTDIR} make -C /usr/ports/textproc/docproj \ 277 ${PBUILD_FLAGS} OPTIONS_UNSET="FOP IGOR" \ 278 install clean distclean 279 fi 280 fi 281 282 if [ ! -z "${EMBEDDEDPORTS}" ]; then 283 for _PORT in ${EMBEDDEDPORTS}; do 284 eval chroot ${CHROOTDIR} make -C /usr/ports/${_PORT} \ 285 BATCH=1 FORCE_PKG_REGISTER=1 install clean distclean 286 done 287 fi 288
|
241 buildenv_setup
| 289 buildenv_setup
|
242 # If a crochet configuration file exists in *this* checkout of 243 # release/, copy it to the /tmp/external directory within the chroot. 244 # This allows building embedded releases without relying on updated 245 # scripts and/or configurations to exist in the branch being built.
| 290 291 return 0 292} # extra_chroot_setup() 293 294# chroot_build_target(): Build the userland and kernel for the build target. 295chroot_build_target() {
|
246 load_target_env
| 296 load_target_env
|
247 if [ -e ${RELENGDIR}/tools/${XDEV}/crochet-${KERNEL}.conf ] && \ 248 [ -e ${RELENGDIR}/${XDEV}/release.sh ]; then 249 mkdir -p ${CHROOTDIR}/tmp/external/${XDEV}/ 250 cp ${RELENGDIR}/tools/${XDEV}/crochet-${KERNEL}.conf \ 251 ${CHROOTDIR}/tmp/external/${XDEV}/crochet-${KERNEL}.conf 252 /bin/sh ${RELENGDIR}/${XDEV}/release.sh
| 297 if [ ! -z "${EMBEDDEDBUILD}" ]; then 298 RELEASE_WMAKEFLAGS="${RELEASE_WMAKEFLAGS} \ 299 TARGET=${EMBEDDED_TARGET} \ 300 TARGET_ARCH=${EMBEDDED_TARGET_ARCH}" 301 RELEASE_KMAKEFLAGS="${RELEASE_KMAKEFLAGS} \ 302 TARGET=${EMBEDDED_TARGET} \ 303 TARGET_ARCH=${EMBEDDED_TARGET_ARCH}"
|
253 fi
| 304 fi
|
254 # If the script does not exist for this architecture, exit. 255 # This probably should be checked earlier, but allowing the rest 256 # of the build process to get this far will at least set up the 257 # chroot environment for testing. 258 exit 0 259else 260 # Not embedded. 261 continue 262fi
| 305 eval chroot ${CHROOTDIR} make -C /usr/src ${RELEASE_WMAKEFLAGS} buildworld 306 eval chroot ${CHROOTDIR} make -C /usr/src ${RELEASE_KMAKEFLAGS} buildkernel
|
263
| 307
|
264if [ -d ${CHROOTDIR}/usr/ports ]; then 265 # Run ldconfig(8) in the chroot directory so /var/run/ld-elf*.so.hints 266 # is created. This is needed by ports-mgmt/pkg. 267 chroot ${CHROOTDIR} /etc/rc.d/ldconfig forcerestart
| 308 return 0 309} # chroot_build_target
|
268
| 310
|
269 ## Trick the ports 'run-autotools-fixup' target to do the right thing. 270 _OSVERSION=$(sysctl -n kern.osreldate) 271 REVISION=$(chroot ${CHROOTDIR} make -C /usr/src/release -V REVISION) 272 BRANCH=$(chroot ${CHROOTDIR} make -C /usr/src/release -V BRANCH) 273 UNAME_r=${REVISION}-${BRANCH} 274 if [ -d ${CHROOTDIR}/usr/doc ] && [ -z "${NODOC}" ]; then 275 PBUILD_FLAGS="OSVERSION=${_OSVERSION} BATCH=yes" 276 PBUILD_FLAGS="${PBUILD_FLAGS} UNAME_r=${UNAME_r}" 277 PBUILD_FLAGS="${PBUILD_FLAGS} OSREL=${REVISION}" 278 chroot ${CHROOTDIR} make -C /usr/ports/textproc/docproj \ 279 ${PBUILD_FLAGS} OPTIONS_UNSET="FOP IGOR" \ 280 install clean distclean
| 311# chroot_build_release(): Invoke the 'make release' target. 312chroot_build_release() { 313 load_target_env 314 eval chroot ${CHROOTDIR} make -C /usr/src/release \ 315 ${RELEASE_RMAKEFLAGS} release 316 eval chroot ${CHROOTDIR} make -C /usr/src/release \ 317 ${RELEASE_RMAKEFLAGS} install DESTDIR=/R \ 318 WITH_COMPRESSED_IMAGES=${WITH_COMPRESSED_IMAGES} \ 319 WITH_COMPRESSED_VMIMAGES=${WITH_COMPRESSED_VMIMAGES} 320 321 return 0 322} # chroot_build_release() 323 324# chroot_arm_armv6_build_release(): Create arm/armv6 SD card image. 325chroot_arm_armv6_build_release() { 326 load_target_env 327 eval chroot ${CHROOTDIR} make -C /usr/src/release obj 328 if [ -e "${RELENGDIR}/tools/${EMBEDDED_TARGET}.subr" ]; then 329 . "${RELENGDIR}/tools/${EMBEDDED_TARGET}.subr"
|
281 fi
| 330 fi
|
282fi
| 331 [ ! -z "${RELEASECONF}" ] && . "${RELEASECONF}" 332 WORLDDIR="$(eval chroot ${CHROOTDIR} make -C /usr/src/release -V WORLDDIR)" 333 OBJDIR="$(eval chroot ${CHROOTDIR} make -C /usr/src/release -V .OBJDIR)" 334 DESTDIR="${OBJDIR}/${KERNEL}" 335 IMGBASE="${CHROOTDIR}/${OBJDIR}/${KERNEL}.img" 336 OSRELEASE="$(eval chroot ${CHROOTDIR} make -C /usr/src/release \ 337 TARGET=${EMBEDDED_TARGET} TARGET_ARCH=${EMBEDDED_TARGET_ARCH} \ 338 -V OSRELEASE)" 339 chroot ${CHROOTDIR} mkdir -p ${DESTDIR} 340 chroot ${CHROOTDIR} truncate -s ${IMAGE_SIZE} ${IMGBASE##${CHROOTDIR}} 341 export mddev=$(chroot ${CHROOTDIR} \ 342 mdconfig -f ${IMGBASE##${CHROOTDIR}} ${MD_ARGS}) 343 arm_create_disk 344 arm_install_base 345 arm_install_uboot 346 mdconfig -d -u ${mddev} 347 chroot ${CHROOTDIR} rmdir ${DESTDIR} 348 mv ${IMGBASE} ${CHROOTDIR}/${OBJDIR}/${OSRELEASE}-${KERNEL}.img 349 chroot ${CHROOTDIR} mkdir -p /R 350 chroot ${CHROOTDIR} cp -p ${OBJDIR}/${OSRELEASE}-${KERNEL}.img \ 351 /R/${OSRELEASE}-${KERNEL}.img 352 chroot ${CHROOTDIR} xz -T ${XZ_THREADS} /R/${OSRELEASE}-${KERNEL}.img 353 cd ${CHROOTDIR}/R && sha256 ${OSRELEASE}* \ 354 > CHECKSUM.SHA256 355 cd ${CHROOTDIR}/R && md5 ${OSRELEASE}* \ 356 > CHECKSUM.MD5
|
283
| 357
|
284buildenv_setup 285load_target_env 286eval chroot ${CHROOTDIR} make -C /usr/src ${RELEASE_WMAKEFLAGS} buildworld 287eval chroot ${CHROOTDIR} make -C /usr/src ${RELEASE_KMAKEFLAGS} buildkernel 288eval chroot ${CHROOTDIR} make -C /usr/src/release ${RELEASE_RMAKEFLAGS} \ 289 release 290eval chroot ${CHROOTDIR} make -C /usr/src/release ${RELEASE_RMAKEFLAGS} \ 291 install DESTDIR=/R WITH_COMPRESSED_IMAGES=${WITH_COMPRESSED_IMAGES} \ 292 WITH_COMPRESSED_VMIMAGES=${WITH_COMPRESSED_VMIMAGES}
| 358 return 0 359} # chroot_arm_armv6_build_release() 360 361# main(): Start here. 362main() { 363 set -e # Everything must succeed 364 env_setup 365 while getopts c: opt; do 366 case ${opt} in 367 c) 368 RELEASECONF="${OPTARG}" 369 ;; 370 \?) 371 usage 372 ;; 373 esac 374 done 375 shift $(($OPTIND - 1)) 376 if [ ! -z "${RELEASECONF}" ]; then 377 if [ -e "${RELEASECONF}" ]; then 378 . ${RELEASECONF} 379 else 380 echo "Nonexistent configuration file: ${RELEASECONF}" 381 echo "Using default build environment." 382 fi 383 fi 384 env_check 385 trap "umount ${CHROOTDIR}/dev" EXIT # Clean up devfs mount on exit 386 chroot_setup 387 extra_chroot_setup 388 chroot_build_target 389 ${chroot_build_release_cmd} 390 391 return 0 392} # main() 393 394main "${@}"
|
| |