1#
| 1#
|
2# $FreeBSD: head/release/picobsd/bridge/crunch.conf 75899 2001-04-24 07:12:34Z joe $
| 2# $FreeBSD: head/release/picobsd/bridge/crunch.conf 77579 2001-06-01 12:06:06Z ru $
|
3# 4# configuration file for "bridge" floppy. 5# Depending on your needs, almost surely you will need to 6# modify your configuration to add/remove/change programs used in 7# the floppy image. Remember that some programs also require 8# matching kernel options to enable device drivers etc. 9# 10# Next to most of the programs i have tried to indicate the approximate 11# space consumed, but beware that these values change from release 12# to release, and might depend on the presence of other programs which 13# share the same libraries. 14# 15# NOTE: the string "/usr/src" will be automatically replaced with the 16# correct value set in 'build' script - you should change it there 17 18# Default build options. Basically tell the Makefiles which understand 19# that to use the most compact possible version of the code. 20# 21buildopts -DNOPAM -DRELEASE_CRUNCH -DNONETGRAPH -DNOIPSEC -DNOINET6 22 23# directories where to look for sources of various binaries. 24srcdirs /usr/src/bin 25srcdirs /usr/src/sbin/i386 26srcdirs /usr/src/sbin 27srcdirs /usr/src/usr.bin 28srcdirs /usr/src/gnu/usr.bin 29srcdirs /usr/src/usr.sbin 30srcdirs /usr/src/libexec 31# Some programs are especially written for PicoBSD and reside here 32srcdirs /usr/src/release/picobsd/tinyware 33# 34# And there are others (mostly ports) which reside in their specific 35# directories. For them, we use the "special" commands to tell 36# crunchgen where to look for sources, objects, which Makefile 37# variables contain the list of sources and objects, and so on. 38 39# init is almost always necessary. 40progs init # 4KB. 41# fsck is almost always necessary, unless you have everything on the 42# image and use 'tar' or something similar to read/write raw blocks 43# from the floppy. 44progs fsck # 24KB. 45# ifconfig is needed if you want to configure interfaces... 46progs ifconfig # 4KB. 47# 48# You will also need a shell and a bunch of utilities. 49# The standard shell is not that large, but you need many 50# external programs. In fact most of them do not take much space 51# as they merely issue a system call, and print the result; the 52# libraries are already needed anyways, so they end up using almost 53# no additional memory. 54# There are a few exceptions such as 'less', which in 4.x is 55# rather large. 56progs sh # 36KB. 57ln sh -sh 58progs echo # 0KB. 59progs pwd 60progs mkdir rmdir 61progs chmod chown 62progs mv ln # 0KB. 63progs mount 64progs minigzip # 0KB. 65ln minigzip gzip 66progs cp # 0KB. 67progs rm 68progs ls 69progs kill 70progs df # 0KB. 71progs ps # 4KB. 72progs ns # 4KB. 73ln ns netstat 74progs vm # 0KB. 75progs cat # 0KB. 76progs test # 0KB. 77ln test [ 78progs hostname # 0KB. 79progs login # 4KB. 80progs getty # 4KB. 81progs stty # 4KB. 82progs w # 0KB. 83progs msg # 0KB. 84ln msg dmesg 85progs kget # 0KB. 86progs reboot # 0KB. 87#progs less # 36KB 88#ln less more 89progs more # 12KB 90special more srcdir /usr/ports/picobsd/more 91 92progs sysctl 93progs swapon # 0KB. 94progs pwd_mkdb # 0KB. 95progs dev_mkdb # 0KB. 96progs umount 97progs mount_std 98progs du # 0KB. 99progs tail # 0KB. 100progs tee # 0KB. 101progs passwd # 0KB. 102 103progs route # 8KB
| 3# 4# configuration file for "bridge" floppy. 5# Depending on your needs, almost surely you will need to 6# modify your configuration to add/remove/change programs used in 7# the floppy image. Remember that some programs also require 8# matching kernel options to enable device drivers etc. 9# 10# Next to most of the programs i have tried to indicate the approximate 11# space consumed, but beware that these values change from release 12# to release, and might depend on the presence of other programs which 13# share the same libraries. 14# 15# NOTE: the string "/usr/src" will be automatically replaced with the 16# correct value set in 'build' script - you should change it there 17 18# Default build options. Basically tell the Makefiles which understand 19# that to use the most compact possible version of the code. 20# 21buildopts -DNOPAM -DRELEASE_CRUNCH -DNONETGRAPH -DNOIPSEC -DNOINET6 22 23# directories where to look for sources of various binaries. 24srcdirs /usr/src/bin 25srcdirs /usr/src/sbin/i386 26srcdirs /usr/src/sbin 27srcdirs /usr/src/usr.bin 28srcdirs /usr/src/gnu/usr.bin 29srcdirs /usr/src/usr.sbin 30srcdirs /usr/src/libexec 31# Some programs are especially written for PicoBSD and reside here 32srcdirs /usr/src/release/picobsd/tinyware 33# 34# And there are others (mostly ports) which reside in their specific 35# directories. For them, we use the "special" commands to tell 36# crunchgen where to look for sources, objects, which Makefile 37# variables contain the list of sources and objects, and so on. 38 39# init is almost always necessary. 40progs init # 4KB. 41# fsck is almost always necessary, unless you have everything on the 42# image and use 'tar' or something similar to read/write raw blocks 43# from the floppy. 44progs fsck # 24KB. 45# ifconfig is needed if you want to configure interfaces... 46progs ifconfig # 4KB. 47# 48# You will also need a shell and a bunch of utilities. 49# The standard shell is not that large, but you need many 50# external programs. In fact most of them do not take much space 51# as they merely issue a system call, and print the result; the 52# libraries are already needed anyways, so they end up using almost 53# no additional memory. 54# There are a few exceptions such as 'less', which in 4.x is 55# rather large. 56progs sh # 36KB. 57ln sh -sh 58progs echo # 0KB. 59progs pwd 60progs mkdir rmdir 61progs chmod chown 62progs mv ln # 0KB. 63progs mount 64progs minigzip # 0KB. 65ln minigzip gzip 66progs cp # 0KB. 67progs rm 68progs ls 69progs kill 70progs df # 0KB. 71progs ps # 4KB. 72progs ns # 4KB. 73ln ns netstat 74progs vm # 0KB. 75progs cat # 0KB. 76progs test # 0KB. 77ln test [ 78progs hostname # 0KB. 79progs login # 4KB. 80progs getty # 4KB. 81progs stty # 4KB. 82progs w # 0KB. 83progs msg # 0KB. 84ln msg dmesg 85progs kget # 0KB. 86progs reboot # 0KB. 87#progs less # 36KB 88#ln less more 89progs more # 12KB 90special more srcdir /usr/ports/picobsd/more 91 92progs sysctl 93progs swapon # 0KB. 94progs pwd_mkdb # 0KB. 95progs dev_mkdb # 0KB. 96progs umount 97progs mount_std 98progs du # 0KB. 99progs tail # 0KB. 100progs tee # 0KB. 101progs passwd # 0KB. 102 103progs route # 8KB
|
104# progs mount_msdos
| 104# progs mount_msdosfs
|
105# progs comcontrol 106# 107# If you want to run natd, remember the alias library 108#progs natd # 20KB 109#libs -lalias # natd 110# 111# ppp is rather large. Note that as of Jan.01, RELEASE_CRUNCH 112# makes ppp not use libalias, so you cannot have aliasing. 113#progs ppp # 112KB 114 115# You need an editor. ee is relatively small, though there are 116# smaller ones. vi is much larger. 117# The editor also usually need a curses library. 118progs ee # 32KB. 119libs -lncurses 120# progs vi # ?? 121# libs -lcurses # for vi 122 123progs tcpdump # 100KB. 124special tcpdump srcdir /usr/src/usr.sbin/tcpdump/tcpdump 125 126progs arp # 0KB. 127 128progs disklabel # 4KB. 129progs fdisk # 4KB. 130progs vnconfig # 0KB. 131 132progs grep # 16KB. 133progs date # 4KB. 134progs mount_nfs # 0KB. 135ln mount_nfs nfs 136progs ping # 4KB. 137#progs routed # 32KB. 138progs ipfw # 12KB. 139progs traceroute # 0KB. 140# progs mount_cd9660 # 4KB. 141# ln mount_cd9660 cd9660 142# progs newfs # 12KB. 143#ln newfs mount_mfs 144ln chown chgrp
| 105# progs comcontrol 106# 107# If you want to run natd, remember the alias library 108#progs natd # 20KB 109#libs -lalias # natd 110# 111# ppp is rather large. Note that as of Jan.01, RELEASE_CRUNCH 112# makes ppp not use libalias, so you cannot have aliasing. 113#progs ppp # 112KB 114 115# You need an editor. ee is relatively small, though there are 116# smaller ones. vi is much larger. 117# The editor also usually need a curses library. 118progs ee # 32KB. 119libs -lncurses 120# progs vi # ?? 121# libs -lcurses # for vi 122 123progs tcpdump # 100KB. 124special tcpdump srcdir /usr/src/usr.sbin/tcpdump/tcpdump 125 126progs arp # 0KB. 127 128progs disklabel # 4KB. 129progs fdisk # 4KB. 130progs vnconfig # 0KB. 131 132progs grep # 16KB. 133progs date # 4KB. 134progs mount_nfs # 0KB. 135ln mount_nfs nfs 136progs ping # 4KB. 137#progs routed # 32KB. 138progs ipfw # 12KB. 139progs traceroute # 0KB. 140# progs mount_cd9660 # 4KB. 141# ln mount_cd9660 cd9660 142# progs newfs # 12KB. 143#ln newfs mount_mfs 144ln chown chgrp
|
145# ln mount_msdos msdos
| 145# ln mount_msdosfs msdos
|
146ln mount_std procfs 147ln mount_std mount_procfs 148 149# If you need to access the box remotely, and maybe copy files 150# from/to it, you can use telnet, rsh or ssh. 151# inetd is only needed for telnet and rshd 152progs inetd # 12KB. 153progs telnet # 20KB. 154progs telnetd # 12KB. 155#progs ftp # 28KB. 156#progs tar # 32KB. 157 158# Check the ssh license! If you want to use this, 159# go to /usr/ports/security/ssh-picobsd, do a make extract configure 160#progs sshd # includes ssh and scp 161special sshd objvar SSHD_OBJS 162special sshd srcdir /usr/ports/picobsd/ssh-picobsd/work/ssh-1.2.27 163special sshd objdir /usr/ports/picobsd/ssh-picobsd/work/ssh-1.2.27 164 165### ee uses ncurses instead of curses 166libs -ledit -lutil -lmd -lcrypt -lmp -lgmp -lm -lkvm 167libs -lmytinfo -lipx -lz -lpcap -lwrap 168libs -ltermcap -lgnuregex -ltelnet # -lcurses
| 146ln mount_std procfs 147ln mount_std mount_procfs 148 149# If you need to access the box remotely, and maybe copy files 150# from/to it, you can use telnet, rsh or ssh. 151# inetd is only needed for telnet and rshd 152progs inetd # 12KB. 153progs telnet # 20KB. 154progs telnetd # 12KB. 155#progs ftp # 28KB. 156#progs tar # 32KB. 157 158# Check the ssh license! If you want to use this, 159# go to /usr/ports/security/ssh-picobsd, do a make extract configure 160#progs sshd # includes ssh and scp 161special sshd objvar SSHD_OBJS 162special sshd srcdir /usr/ports/picobsd/ssh-picobsd/work/ssh-1.2.27 163special sshd objdir /usr/ports/picobsd/ssh-picobsd/work/ssh-1.2.27 164 165### ee uses ncurses instead of curses 166libs -ledit -lutil -lmd -lcrypt -lmp -lgmp -lm -lkvm 167libs -lmytinfo -lipx -lz -lpcap -lwrap 168libs -ltermcap -lgnuregex -ltelnet # -lcurses
|