1#!/bin/sh -
2#
| 1#!/bin/sh -
2#
|
3# $Id: rc.network,v 1.3 1997/05/01 04:38:16 jkh Exp $
| 3# $Id: rc.network,v 1.4 1997/05/01 20:04:42 jkh Exp $
|
4# From: @(#)netstart 5.9 (Berkeley) 3/30/91
5
6# Note that almost all the user-configurable behavior is no longer in
7# this file, but rather in /etc/rc.conf. Please check that file
8# first before contemplating any changes here. If you do need to change
9# this file for some reason, we would like to know about it.
10
11# First pass startup stuff.
12
13network_pass1() {
14 echo -n 'Doing initial network setup:'
15 # Set the host name if it is not already set
16 if [ -z "`hostname -s`" ] ; then
17 hostname $hostname
18 echo -n ' hostname'
19 fi
20
21 # Set the domainname if we're using NIS
22 if [ -n "$nisdomainname" -a "x$nisdomainname" != "xNO" ] ; then
23 domainname $nisdomainname
24 echo -n ' domain'
25 fi
26 echo '.'
27
28 # Set up all the network interfaces, calling startup scripts if needed
29 for ifn in ${network_interfaces}; do
30 if [ -e /etc/start_if.${ifn} ]; then
31 . /etc/start_if.${ifn} ${ifn}
32 fi
33 # Do the primary ifconfig if specified
34 eval ifconfig_args=\$ifconfig_${ifn}
35 if [ -n "${ifconfig_args}" ] ; then
36 ifconfig ${ifn} ${ifconfig_args}
37 fi
38 # Check to see if aliases need to be added
39 alias=0
40 while :
41 do
42 eval ifconfig_args=\$ifconfig_${ifn}_alias${alias}
43 if [ -n "${ifconfig_args}" ]; then
44 ifconfig ${ifn} ${ifconfig_args} alias
45 alias=`expr ${alias} + 1`
46 else
47 break;
48 fi
49 done
50 # Do ipx address if specified
51 eval ifconfig_args=\$ifconfig_${ifn}_ipx
52 if [ -n "${ifconfig_args}" ]; then
53 ifconfig ${ifn} ${ifconfig_args}
54 fi
55 ifconfig ${ifn}
56 done
57
58 # If IP filtering
59 if [ -n "$firewall" -a "x$firewall" != "xNO" -a -f /etc/rc.firewall ] ; then
60 echo -n ' firewall'
61 . /etc/rc.firewall
62 fi
63
64 if [ "x$defaultrouter" != "xNO" ] ; then
65 static_routes="default ${static_routes}"
66 route_default="default ${defaultrouter}"
67 fi
68
69 # Set up any static routes. This should be done before router discovery.
70 if [ "x${static_routes}" != "x" ]; then
71 for i in ${static_routes}; do
72 eval route_args=\$route_${i}
73 route add ${route_args}
74 done
75 fi
76
77 echo -n 'Additional routing options:'
78 if [ "X$gateway_enable" = X"YES" ]; then
| 4# From: @(#)netstart 5.9 (Berkeley) 3/30/91
5
6# Note that almost all the user-configurable behavior is no longer in
7# this file, but rather in /etc/rc.conf. Please check that file
8# first before contemplating any changes here. If you do need to change
9# this file for some reason, we would like to know about it.
10
11# First pass startup stuff.
12
13network_pass1() {
14 echo -n 'Doing initial network setup:'
15 # Set the host name if it is not already set
16 if [ -z "`hostname -s`" ] ; then
17 hostname $hostname
18 echo -n ' hostname'
19 fi
20
21 # Set the domainname if we're using NIS
22 if [ -n "$nisdomainname" -a "x$nisdomainname" != "xNO" ] ; then
23 domainname $nisdomainname
24 echo -n ' domain'
25 fi
26 echo '.'
27
28 # Set up all the network interfaces, calling startup scripts if needed
29 for ifn in ${network_interfaces}; do
30 if [ -e /etc/start_if.${ifn} ]; then
31 . /etc/start_if.${ifn} ${ifn}
32 fi
33 # Do the primary ifconfig if specified
34 eval ifconfig_args=\$ifconfig_${ifn}
35 if [ -n "${ifconfig_args}" ] ; then
36 ifconfig ${ifn} ${ifconfig_args}
37 fi
38 # Check to see if aliases need to be added
39 alias=0
40 while :
41 do
42 eval ifconfig_args=\$ifconfig_${ifn}_alias${alias}
43 if [ -n "${ifconfig_args}" ]; then
44 ifconfig ${ifn} ${ifconfig_args} alias
45 alias=`expr ${alias} + 1`
46 else
47 break;
48 fi
49 done
50 # Do ipx address if specified
51 eval ifconfig_args=\$ifconfig_${ifn}_ipx
52 if [ -n "${ifconfig_args}" ]; then
53 ifconfig ${ifn} ${ifconfig_args}
54 fi
55 ifconfig ${ifn}
56 done
57
58 # If IP filtering
59 if [ -n "$firewall" -a "x$firewall" != "xNO" -a -f /etc/rc.firewall ] ; then
60 echo -n ' firewall'
61 . /etc/rc.firewall
62 fi
63
64 if [ "x$defaultrouter" != "xNO" ] ; then
65 static_routes="default ${static_routes}"
66 route_default="default ${defaultrouter}"
67 fi
68
69 # Set up any static routes. This should be done before router discovery.
70 if [ "x${static_routes}" != "x" ]; then
71 for i in ${static_routes}; do
72 eval route_args=\$route_${i}
73 route add ${route_args}
74 done
75 fi
76
77 echo -n 'Additional routing options:'
78 if [ "X$gateway_enable" = X"YES" ]; then
|
79 echo -n ' IP gateway=1'
| 79 echo -n ' IP gateway=YES'
|
80 sysctl -w net.inet.ip.forwarding=1 >/dev/null 2>&1
81 fi
82
83 if [ "X$router_enable" = X"YES" ]; then
84 echo -n " ${router}"; ${router} ${router_flags}
85 fi
86
87 if [ "X$ipxgateway_enable" = X"YES" ]; then
| 80 sysctl -w net.inet.ip.forwarding=1 >/dev/null 2>&1
81 fi
82
83 if [ "X$router_enable" = X"YES" ]; then
84 echo -n " ${router}"; ${router} ${router_flags}
85 fi
86
87 if [ "X$ipxgateway_enable" = X"YES" ]; then
|
88 echo -n ' IPX gateway=1'
| 88 echo -n ' IPX gateway=YES'
|
89 sysctl -w net.ipx.ipx.ipxforwarding=1 >/dev/null 2>&1
90 fi
91
92 if [ "X$ipxrouted_enable" = X"YES" ]; then
93 echo -n ' IPXrouted: '
94 IPXrouted ${ipxrouted_flags} > /dev/null 2>&1
95 fi
96 echo '.'
97 network_pass1_done=YES # Let future generations know we made it.
98}
99
100network_pass2() {
101 echo -n 'Doing additional network setup:'
| 89 sysctl -w net.ipx.ipx.ipxforwarding=1 >/dev/null 2>&1
90 fi
91
92 if [ "X$ipxrouted_enable" = X"YES" ]; then
93 echo -n ' IPXrouted: '
94 IPXrouted ${ipxrouted_flags} > /dev/null 2>&1
95 fi
96 echo '.'
97 network_pass1_done=YES # Let future generations know we made it.
98}
99
100network_pass2() {
101 echo -n 'Doing additional network setup:'
|
102 if [ -n "$tcp_extensions" -a "x$tcp_extensions" != "xYES" ] ; then
103 echo -n ' tcp extentions=0'
| 102 if [ -n "$tcp_extentions" -a "x$tcp_extentions" != "xYES" ] ; then
103 echo -n ' tcp extentions=NO'
|
104 sysctl -w net.inet.tcp.rfc1323=0 >/dev/null 2>&1
105 sysctl -w net.inet.tcp.rfc1644=0 >/dev/null 2>&1
106 fi
107 if [ "X${named_enable}" = X"YES" ]; then
108 echo -n ' named'; named ${named_flags}
109 fi
110
111 if [ "X${ntpdate_enable}" = X"YES" -o "X${xntpd_enable}" = X"YES" ]; then
112 if [ "X${tickadj_enable}" = X"YES" ]; then
113 echo -n ' tickadj'; tickadj ${tickadj_flags--Aq}
114 fi
115
116 if [ "X${ntpdate_enable}" = X"YES" ]; then
117 echo -n ' ntpdate'; ntpdate ${ntpdate_flags} >/dev/null 2>&1
118 fi
119
120 if [ "X${xntpd_enable}" = X"YES" ]; then
121 echo -n ' xntpd'; xntpd ${xntpd_flags}
122 fi
123 fi
124
125 if [ "X${timed_enable}" = X"YES" ]; then
126 echo -n ' timed'; timed ${timed_flags}
127 fi
128
129 if [ "X${portmap_enable}" = X"YES" ]; then
130 echo -n ' portmap'; portmap ${portmap_flags}
131 fi
132
133 # Start ypserv if we're an NIS server.
134 # Run rpc.ypxfrd and rpc.yppasswdd only on the NIS master server.
135 if [ "X${nis_server_enable}" = X"YES" ]; then
136 echo -n ' ypserv'; ypserv ${nis_server_flags}
137
138 if [ "X${nis_ypxfrd_enable}" = X"YES" ]; then
139 echo -n ' rpc.ypxfrd'; rpc.ypxfrd ${nis_ypxfrd_flags}
140 fi
141
142 if [ "X${nis_yppasswdd_enable}" = X"YES" ]; then
143 echo -n ' rpc.yppasswdd'; rpc.yppasswdd ${nis_yppasswdd_flags}
144 fi
145 fi
146
147 # Start ypbind if we're an NIS client
148 if [ "X${nis_client_enable}" = X"YES" ]; then
149 echo -n ' ypbind'; ypbind ${nis_client_flags}
150 if [ "X${nis_ypset_enable}" = X"YES" ]; then
151 echo -n ' ypset'; ypset ${nis_ypset_flags}
152 fi
153 fi
154
155 echo '.'
156 network_pass2_done=YES
157}
158
159network_pass3() {
160 echo -n 'Starting final network daemons:'
161
162 if [ "X${nfs_server_enable}" = X"YES" -a -r /etc/exports ]; then
163 echo -n ' mountd'
164 if [ "X${weak_mountd_authentication}" = X"YES" ]; then
165 mountd_flags="-n"
166 fi
167 mountd ${mountd_flags}
168 if [ "X${nfs_reserved_port_only}" = X"YES" ]; then
| 104 sysctl -w net.inet.tcp.rfc1323=0 >/dev/null 2>&1
105 sysctl -w net.inet.tcp.rfc1644=0 >/dev/null 2>&1
106 fi
107 if [ "X${named_enable}" = X"YES" ]; then
108 echo -n ' named'; named ${named_flags}
109 fi
110
111 if [ "X${ntpdate_enable}" = X"YES" -o "X${xntpd_enable}" = X"YES" ]; then
112 if [ "X${tickadj_enable}" = X"YES" ]; then
113 echo -n ' tickadj'; tickadj ${tickadj_flags--Aq}
114 fi
115
116 if [ "X${ntpdate_enable}" = X"YES" ]; then
117 echo -n ' ntpdate'; ntpdate ${ntpdate_flags} >/dev/null 2>&1
118 fi
119
120 if [ "X${xntpd_enable}" = X"YES" ]; then
121 echo -n ' xntpd'; xntpd ${xntpd_flags}
122 fi
123 fi
124
125 if [ "X${timed_enable}" = X"YES" ]; then
126 echo -n ' timed'; timed ${timed_flags}
127 fi
128
129 if [ "X${portmap_enable}" = X"YES" ]; then
130 echo -n ' portmap'; portmap ${portmap_flags}
131 fi
132
133 # Start ypserv if we're an NIS server.
134 # Run rpc.ypxfrd and rpc.yppasswdd only on the NIS master server.
135 if [ "X${nis_server_enable}" = X"YES" ]; then
136 echo -n ' ypserv'; ypserv ${nis_server_flags}
137
138 if [ "X${nis_ypxfrd_enable}" = X"YES" ]; then
139 echo -n ' rpc.ypxfrd'; rpc.ypxfrd ${nis_ypxfrd_flags}
140 fi
141
142 if [ "X${nis_yppasswdd_enable}" = X"YES" ]; then
143 echo -n ' rpc.yppasswdd'; rpc.yppasswdd ${nis_yppasswdd_flags}
144 fi
145 fi
146
147 # Start ypbind if we're an NIS client
148 if [ "X${nis_client_enable}" = X"YES" ]; then
149 echo -n ' ypbind'; ypbind ${nis_client_flags}
150 if [ "X${nis_ypset_enable}" = X"YES" ]; then
151 echo -n ' ypset'; ypset ${nis_ypset_flags}
152 fi
153 fi
154
155 echo '.'
156 network_pass2_done=YES
157}
158
159network_pass3() {
160 echo -n 'Starting final network daemons:'
161
162 if [ "X${nfs_server_enable}" = X"YES" -a -r /etc/exports ]; then
163 echo -n ' mountd'
164 if [ "X${weak_mountd_authentication}" = X"YES" ]; then
165 mountd_flags="-n"
166 fi
167 mountd ${mountd_flags}
168 if [ "X${nfs_reserved_port_only}" = X"YES" ]; then
|
169 echo -n ' nfsprivport=1'
| 169 echo -n ' nfsprivport=YES'
|
170 sysctl -w vfs.nfs.nfs_privport=1 >/dev/null 2>&1
171 fi
172 echo -n ' nfsd'; nfsd -u -t 4
173 if [ "X$rpc_lockd_enable" = X"YES" ]; then
174 echo -n ' rpc.lockd'; rpc.lockd
175 fi
176 if [ "X$rpc_statd_enable" = X"YES" ]; then
177 echo -n ' rpc.statd'; rpc.statd
178 fi
179 fi
180
181 if [ "X${nfs_client_enable}" = X"YES" ]; then
182 echo -n ' nfsiod'; nfsiod -n 4
183 fi
184
185 if [ "X${amd_enable}" = X"YES" ]; then
186 echo -n ' amd'
187 amd -p ${amd_flags} > /var/run/amd.pid 2> /dev/null
188 fi
189
190 if [ "X${rwhod_enable}" = X"YES" ]; then
191 echo -n ' rwhod'; rwhod
192 fi
193
194 # Kerberos runs ONLY on the Kerberos server machine
195 if [ "X${kerberos_server_enable}" = X"YES" ]; then
196 echo -n ' kerberos'; kerberos >> /var/log/kerberos.log &
197 echo -n ' kadmind'; \
198 (sleep 20; kadmind -n >/dev/null 2>&1 &) &
199 fi
200
201 # IP multicast routing daemon
202 if [ "X${mrouted_enable}" = X"YES" ]; then
203 echo -n ' mrouted'; mrouted ${mrouted_flags}
204 fi
205 echo '.'
206 network_pass3_done=YES
207}
| 170 sysctl -w vfs.nfs.nfs_privport=1 >/dev/null 2>&1
171 fi
172 echo -n ' nfsd'; nfsd -u -t 4
173 if [ "X$rpc_lockd_enable" = X"YES" ]; then
174 echo -n ' rpc.lockd'; rpc.lockd
175 fi
176 if [ "X$rpc_statd_enable" = X"YES" ]; then
177 echo -n ' rpc.statd'; rpc.statd
178 fi
179 fi
180
181 if [ "X${nfs_client_enable}" = X"YES" ]; then
182 echo -n ' nfsiod'; nfsiod -n 4
183 fi
184
185 if [ "X${amd_enable}" = X"YES" ]; then
186 echo -n ' amd'
187 amd -p ${amd_flags} > /var/run/amd.pid 2> /dev/null
188 fi
189
190 if [ "X${rwhod_enable}" = X"YES" ]; then
191 echo -n ' rwhod'; rwhod
192 fi
193
194 # Kerberos runs ONLY on the Kerberos server machine
195 if [ "X${kerberos_server_enable}" = X"YES" ]; then
196 echo -n ' kerberos'; kerberos >> /var/log/kerberos.log &
197 echo -n ' kadmind'; \
198 (sleep 20; kadmind -n >/dev/null 2>&1 &) &
199 fi
200
201 # IP multicast routing daemon
202 if [ "X${mrouted_enable}" = X"YES" ]; then
203 echo -n ' mrouted'; mrouted ${mrouted_flags}
204 fi
205 echo '.'
206 network_pass3_done=YES
207}
|