1#!/bin/sh
2
3# This is rc.conf - a file full of useful variables that you can set
4# to change the default startup behavior of your system. You should
5# not edit this file! Put any overrides into one of the ${rc_conf_files}
6# instead and you will be able to update these defaults later without
7# spamming your local configuration information.
8#
9# The ${rc_conf_files} files should only contain values which override
10# values set in this file. This eases the upgrade path when defaults
11# are changed and new features are added.
12#
13# All arguments must be in double or single quotes.
14#
15# For a more detailed explanation of all the rc.conf variables, please
16# refer to the rc.conf(5) manual page.
17#
18# $FreeBSD: head/etc/defaults/rc.conf 175722 2008-01-27 15:15:12Z mtm $
19
20##############################################################
21### Important initial Boot-time options ####################
22##############################################################
23
24rc_debug="NO" # Set to YES to enable debugging output from rc.d
25rc_info="NO" # Enables display of informational messages at boot.
26rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown
27early_late_divider="FILESYSTEMS" # Script that separates early/late
28 # stages of the boot process. Make sure you know
29 # the ramifications if you change this.
30 # See rc.conf(5) for more details.
31
32swapfile="NO" # Set to name of swapfile if aux swapfile desired.
33apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO).
34apmd_enable="NO" # Run apmd to handle APM event from userland.
35apmd_flags="" # Flags to apmd (if enabled).
36devd_enable="YES" # Run devd, to trigger programs on device tree changes.
37devd_flags="" # Additional flags for devd(8).
38kldxref_enable="NO" # Build linker.hints files with kldxref(8).
39kldxref_clobber="NO" # Overwrite old linker.hints at boot.
40kldxref_module_path="" # Override kern.module_path. A ';'-delimited list.
41powerd_enable="NO" # Run powerd to lower our power usage.
42powerd_flags="" # Flags to powerd (if enabled).
43tmpmfs="AUTO" # Set to YES to always create an mfs /tmp, NO to never
44tmpsize="20m" # Size of mfs /tmp if created
45tmpmfs_flags="-S" # Extra mdmfs options for the mfs /tmp
46varmfs="AUTO" # Set to YES to always create an mfs /var, NO to never
47varsize="32m" # Size of mfs /var if created
48varmfs_flags="-S" # Extra mount options for the mfs /var
49populate_var="AUTO" # Set to YES to always (re)populate /var, NO to never
50cleanvar_enable="YES" # Clean the /var directory
51local_startup="/usr/local/etc/rc.d" # startup script dirs.
52script_name_sep=" " # Change if your startup scripts' names contain spaces
53rc_conf_files="/etc/rc.conf /etc/rc.conf.local"
54
55# ZFS support
56zfs_enable="NO" # Set to YES to automatically mount ZFS file systems
57
58# Experimental - test before enabling
59gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab
60gbde_devices="NO" # Devices to automatically attach (list, or AUTO)
61gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices
62gbde_lockdir="/etc" # Where to look for gbde lockfiles
63
64# GELI disk encryption configuration.
65geli_devices="" # List of devices to automatically attach in addition to
66 # GELI devices listed in /etc/fstab.
67geli_tries="" # Number of times to attempt attaching geli device.
68 # If empty, kern.geom.eli.tries will be used.
69geli_default_flags="" # Default flags for geli(8).
70geli_autodetach="YES" # Automatically detach on last close.
71 # Providers are marked as such when all file systems are
72 # mounted.
73# Example use.
74#geli_devices="da1 mirror/home"
75#geli_da1_flags="-p -k /etc/geli/da1.keys"
76#geli_da1_autodetach="NO"
77#geli_mirror_home_flags="-k /etc/geli/home.keys"
78
79geli_swap_flags="-e aes -l 256 -s 4096 -d" # Options for GELI-encrypted
80 # swap partitions.
81
82root_rw_mount="YES" # Set to NO to inhibit remounting root read-write.
83fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails.
84background_fsck="YES" # Attempt to run fsck in the background where possible.
85background_fsck_delay="60" # Time to wait (seconds) before starting the fsck.
86netfs_types="nfs:NFS nfs4:NFS4 smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net filesystems.
87extra_netfs_types="NO" # List of network extra filesystem types for delayed
88 # mount at startup (or NO).
89
90##############################################################
91### Network configuration sub-section ######################
92##############################################################
93
94### Basic network and firewall/security options: ###
95hostname="" # Set this!
96hostid_enable="YES" # Set host UUID.
97hostid_file="/etc/hostid" # File with hostuuid.
98nisdomainname="NO" # Set to NIS domain if using NIS (or NO).
99dhclient_program="/sbin/dhclient" # Path to dhcp client program.
100dhclient_flags="" # Extra flags to pass to dhcp client.
101#dhclient_flags_fxp0="" # Extra dhclient flags for fxp0 only
102background_dhclient="NO" # Start dhcp client in the background.
103#background_dhclient_fxp0="YES" # Start dhcp client on fxp0 in the background.
104synchronous_dhclient="YES" # Start dhclient directly on configured
105 # interfaces during startup.
106firewall_enable="NO" # Set to YES to enable firewall functionality
107firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall
108firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall)
109firewall_quiet="NO" # Set to YES to suppress rule display
110firewall_logging="NO" # Set to YES to enable events logging
111firewall_flags="" # Flags passed to ipfw when type is a file
112firewall_myservices="" # List of TCP ports on which this host
113 # offers services
114firewall_allowservices="" # List of IPs which has access to
115 # $firewall_myservices
116firewall_trusted="" # List of IPs which has full access to this host
117firewall_logdeny="NO" # Set to YES to log default denied incoming
118 # packets.
119firewall_nologports="135-139,445 1026,1027 1433,1434" # List of TCP/UDP ports
120 # for which denied incoming packets are not
121 # logged.
122firewall_nat_enable="NO" # Enable kernel NAT (if firewall_enable == YES)
123firewall_nat_interface="" # Public interface or IPaddress to use
124firewall_nat_flags="" # Additional configuration parameters
125dummynet_enable="NO" # Load the dummynet(4) module
126ip_portrange_first="NO" # Set first dynamically allocated port
127ip_portrange_last="NO" # Set last dynamically allocated port
128ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd)
129ike_program="/usr/local/sbin/isakmpd" # Path to IKE daemon
130ike_flags="" # Additional flags for IKE daemon
131ipsec_enable="NO" # Set to YES to run setkey on ipsec_file
132ipsec_file="/etc/ipsec.conf" # Name of config file for setkey
133natd_program="/sbin/natd" # path to natd, if you want a different one.
134natd_enable="NO" # Enable natd (if firewall_enable == YES).
135natd_interface="" # Public interface or IPaddress to use.
136natd_flags="" # Additional flags for natd.
137ipfilter_enable="NO" # Set to YES to enable ipfilter functionality
138ipfilter_program="/sbin/ipf" # where the ipfilter program lives
139ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see
140 # /usr/src/contrib/ipfilter/rules for examples
141ipfilter_flags="" # additional flags for ipfilter
142ipnat_enable="NO" # Set to YES to enable ipnat functionality
143ipnat_program="/sbin/ipnat" # where the ipnat program lives
144ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat
145ipnat_flags="" # additional flags for ipnat
146ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat
147ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives
148ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog"
149ipfs_enable="NO" # Set to YES to enable saving and restoring
150 # of state tables at shutdown and boot
151ipfs_program="/sbin/ipfs" # where the ipfs program lives
152ipfs_flags="" # additional flags for ipfs
153pf_enable="NO" # Set to YES to enable packet filter (pf)
154pf_rules="/etc/pf.conf" # rules definition file for pf
155pf_program="/sbin/pfctl" # where the pfctl program lives
156pf_flags="" # additional flags for pfctl
157pflog_enable="NO" # Set to YES to enable packet filter logging
158pflog_logfile="/var/log/pflog" # where pflogd should store the logfile
159pflog_program="/sbin/pflogd" # where the pflogd program lives
160pflog_flags="" # additional flags for pflogd
161ftpproxy_enable="NO" # Set to YES to enable ftp-proxy(8) for pf
162ftpproxy_flags="" # additional flags for ftp-proxy(8)
163pfsync_enable="NO" # Expose pf state to other hosts for syncing
164pfsync_syncdev="" # Interface for pfsync to work through
165pfsync_syncpeer="" # IP address of pfsync peer host
166pfsync_ifconfig="" # Additional options to ifconfig(8) for pfsync
167tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions.
168log_in_vain="0" # >=1 to log connects to ports w/o listeners.
169tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO).
170tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN
171 # NOTE: this violates the TCP specification
172icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets
173icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets
174network_interfaces="auto" # List of network interfaces (or "auto").
175cloned_interfaces="" # List of cloned network interfaces to create.
176#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config.
177ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration.
178#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
179#ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry.
180#ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0.
181#ipv4_addrs_fxp0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry.
182#
183#autobridge_interfaces="bridge0" # List of bridges to check
184#autobridge_bridge0="tap* vlan0" # Interface glob to automatically add to the bridge
185#
186# If you have any sppp(4) interfaces above, you might also want to set
187# the following parameters. Refer to spppcontrol(8) for their meaning.
188sppp_interfaces="" # List of sppp interfaces.
189#sppp_interfaces="isp0" # example: sppp over ISDN
190#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'"
191gif_interfaces="" # List of GIF tunnels.
192#gif_interfaces="gif0 gif1" # Examples typically for a router.
193 # Choose correct tunnel addrs.
194#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router.
195#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router.
196fec_interfaces="" # List of Fast EtherChannels.
197#fec_interfaces="fec0 fec1"
198#fecconfig_fec0="fxp0 dc0" # Examples typically for two NICs
199#fecconfig_fec1="em0 em1 bge0 bge1" # Examples typically for four NICs
200
201# User ppp configuration.
202ppp_enable="NO" # Start user-ppp (or NO).
203ppp_program="/usr/sbin/ppp" # Path to user-ppp program.
204ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated".
205 # For details see man page for ppp(8). Default is auto.
206ppp_nat="YES" # Use PPP's internal network address translation or NO.
207ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf.
208ppp_user="root" # Which user to run ppp as
209
210# Start multiple instances of ppp at boot time
211#ppp_profile="profile1 profile2 profile3" # Which profiles to use
212#ppp_profile1_mode="ddial" # Override ppp mode for profile1
213#ppp_profile2_nat="NO" # Override nat mode for profile2
214# profile3 uses default ppp_mode and ppp_nat
215
216### Network daemon (miscellaneous) ###
217hostapd_enable="NO" # Run hostap daemon.
218syslogd_enable="YES" # Run syslog daemon (or NO).
219syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one.
220syslogd_flags="-s" # Flags to syslogd (if enabled).
221inetd_enable="NO" # Run the network daemon dispatcher (YES/NO).
222inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one.
223inetd_flags="-wW -C 60" # Optional flags to inetd
224#
225# named. It may be possible to run named in a sandbox, man security for
226# details.
227#
228named_enable="NO" # Run named, the DNS server (or NO).
229named_program="/usr/sbin/named" # path to named, if you want a different one.
230#named_flags="" # Flags for named
231named_pidfile="/var/run/named/pid" # Must set this in named.conf as well
232named_uid="bind" # User to run named as
233named_chrootdir="/var/named" # Chroot directory (or "" not to auto-chroot it)
234named_chroot_autoupdate="YES" # Automatically install/update chrooted
235 # components of named. See /etc/rc.d/named.
236named_symlink_enable="YES" # Symlink the chrooted pid file
237
238#
239# kerberos. Do not run the admin daemons on slave servers
240#
241kerberos5_server_enable="NO" # Run a kerberos 5 master server (or NO).
242kerberos5_server="/usr/libexec/kdc" # path to kerberos 5 KDC
243kerberos5_server_flags="--detach" # Additional flags to the kerberos 5 server
244kadmind5_server_enable="NO" # Run kadmind (or NO)
245kadmind5_server="/usr/libexec/kadmind" # path to kerberos 5 admin daemon
246kpasswdd_server_enable="NO" # Run kpasswdd (or NO)
247kpasswdd_server="/usr/libexec/kpasswdd" # path to kerberos 5 passwd daemon
248
249rwhod_enable="NO" # Run the rwho daemon (or NO).
250rwhod_flags="" # Flags for rwhod
251rarpd_enable="NO" # Run rarpd (or NO).
252rarpd_flags="" # Flags to rarpd.
253bootparamd_enable="NO" # Run bootparamd (or NO).
254bootparamd_flags="" # Flags to bootparamd
255pppoed_enable="NO" # Run the PPP over Ethernet daemon.
256pppoed_provider="*" # Provider and ppp(8) config file entry.
257pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled).
258pppoed_interface="fxp0" # The interface that pppoed runs on.
259sshd_enable="NO" # Enable sshd
260sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one.
261sshd_flags="" # Additional flags for sshd.
262ftpd_enable="NO" # Enable stand-alone ftpd.
263ftpd_program="/usr/libexec/ftpd" # Path to ftpd, if you want a different one.
264ftpd_flags="" # Additional flags to stand-alone ftpd.
265
266### Network daemon (NFS): All need rpcbind_enable="YES" ###
267amd_enable="NO" # Run amd service with $amd_flags (or NO).
268amd_program="/usr/sbin/amd" # path to amd, if you want a different one.
269amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map"
270amd_map_program="NO" # Can be set to "ypcat -k amd.master"
271nfs_client_enable="NO" # This host is an NFS client (or NO).
272nfs_access_cache="60" # Client cache timeout in seconds
273nfs_server_enable="NO" # This host is an NFS server (or NO).
274nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled).
275idmapd_enable="NO" # Run the NFS4 id mapper (YES/NO).
276idmapd_flags="" # Additional flags for idmapd.
277mountd_enable="NO" # Run mountd (or NO).
278mountd_flags="-r" # Flags to mountd (if NFS server enabled).
279weak_mountd_authentication="NO" # Allow non-root mount requests to be served.
280nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO).
281nfs_bufpackets="" # bufspace (in packets) for client
282rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server.
283rpc_lockd_flags="" # Flags to rpc.lockd (if enabled).
284rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server.
285rpc_statd_flags="" # Flags to rpc.statd (if enabled).
286rpcbind_enable="NO" # Run the portmapper service (YES/NO).
287rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one.
288rpcbind_flags="" # Flags to rpcbind (if enabled).
289rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO).
290keyserv_enable="NO" # Run the SecureRPC keyserver (or NO).
291keyserv_flags="" # Flags to keyserv (if enabled).
292
293### Network Time Services options: ###
294timed_enable="NO" # Run the time daemon (or NO).
295timed_flags="" # Flags to timed (if enabled).
296ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO).
297ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one.
298ntpdate_flags="-b" # Flags to ntpdate (if enabled).
299ntpdate_config="/etc/ntp.conf" # ntpdate(8) configuration file
300ntpdate_hosts="" # Whitespace-separated list of ntpdate(8) servers.
301ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO).
302ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one.
303ntpd_config="/etc/ntp.conf" # ntpd(8) configuration file
304ntpd_sync_on_start="NO" # Sync time on ntpd startup, even if offset is high
305ntpd_flags="-p /var/run/ntpd.pid -f /var/db/ntpd.drift"
306 # Flags to ntpd (if enabled).
307
308# Network Information Services (NIS) options: All need rpcbind_enable="YES" ###
309nis_client_enable="NO" # We're an NIS client (or NO).
310nis_client_flags="" # Flags to ypbind (if enabled).
311nis_ypset_enable="NO" # Run ypset at boot time (or NO).
312nis_ypset_flags="" # Flags to ypset (if enabled).
313nis_server_enable="NO" # We're an NIS server (or NO).
314nis_server_flags="" # Flags to ypserv (if enabled).
315nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO).
316nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled).
317nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO).
318nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled).
319
320### SNMP daemon ###
321# Be sure to understand the security implications of running SNMP v1/v2
322# in your network.
323bsnmpd_enable="NO" # Run the SNMP daemon (or NO).
324bsnmpd_flags="" # Flags for bsnmpd.
325
326### Network routing options: ###
327defaultrouter="NO" # Set to default gateway (or NO).
328static_routes="" # Set to static route list (or leave empty).
329natm_static_routes="" # Set to static route list for NATM (or leave empty).
330gateway_enable="NO" # Set to YES if this host will be a gateway.
331router_enable="NO" # Set to YES to enable a routing daemon.
332router="/sbin/routed" # Name of routing daemon to use if enabled.
333router_flags="-q" # Flags for routing daemon.
334mrouted_enable="NO" # Do IPv4 multicast routing.
335mrouted_program="/usr/local/sbin/mrouted" # Name of IPv4 multicast
336 # routing daemon. You need to
337 # install it from package or
338 # port.
339mrouted_flags="" # Flags for multicast routing daemon.
340ipxgateway_enable="NO" # Set to YES to enable IPX routing.
341ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon.
342ipxrouted_flags="" # Flags for IPX routing daemon.
343arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL.
344forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES")
345accept_sourceroute="NO" # accept source routed packets to us
346
347### ATM interface options: ###
348atm_enable="NO" # Configure ATM interfaces (or NO).
349#atm_netif_hea0="atm 1" # Network interfaces for physical interface.
350#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface.
351#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI).
352#atm_macaddr_hea0="NO" # Override physical MAC address (or NO).
353#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local).
354#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO).
355atm_pvcs="" # Set to PVC list (or leave empty).
356atm_arps="" # Set to permanent ARP list (or leave empty).
357
358### ISDN interface options: (see also: /usr/share/examples/isdn) ###
359isdn_enable="NO" # Enable the ISDN subsystem (or NO).
360isdn_fsdev="NO" # Output device for fullscreen mode (or NO for daemon mode).
361isdn_flags="-dn -d0x1f9" # Flags for isdnd
362isdn_ttype="cons25" # terminal type for fullscreen mode
363isdn_screenflags="NO" # screenflags for ${isdn_fsdev}
364isdn_trace="NO" # Enable the ISDN trace subsystem (or NO).
365isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace
366
367### Bluetooth ###
368hcsecd_enable="NO" # Enable hcsecd(8) (or NO)
369hcsecd_config="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file
370
371sdpd_enable="NO" # Enable sdpd(8) (or NO)
372sdpd_control="/var/run/sdp" # sdpd(8) control socket
373sdpd_groupname="nobody" # set spdp(8) user/group to run as after
374sdpd_username="nobody" # it initializes
375
376bthidd_enable="NO" # Enable bthidd(8) (or NO)
377bthidd_config="/etc/bluetooth/bthidd.conf" # bthidd(8) configuration file
378bthidd_hids="/var/db/bthidd.hids" # bthidd(8) known HID devices file
379
380### Miscellaneous network options: ###
381icmp_bmcastecho="NO" # respond to broadcast ping packets
382
383### IPv6 options: ###
384ipv6_enable="NO" # Set to YES to set up for IPv6.
385ipv6_network_interfaces="auto" # List of network interfaces (or "auto").
386ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO).
387#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068)
388ipv6_static_routes="" # Set to static route list (or leave empty).
389#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64
390 # route toward loopback interface.
391#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1"
392ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway.
393ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon.
394ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon.
395ipv6_router_flags="" # Flags to IPv6 routing daemon.
396#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local
397 # addrs.
398#ipv6_router_flags="-q" # If you want to run a routing daemon on an end
399 # node, you should stop advertisement.
400#ipv6_network_interfaces="ed0 ep0" # Examples for router
401 # or static configuration for end node.
402 # Choose correct prefix value.
403#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr.
404#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr.
405#ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry
406#ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry.
407ipv6_default_interface="NO" # Default output interface for scoped addrs.
408 # Now this works only for IPv6 link local
409 # multicast addrs.
410rtsol_flags="" # Flags to IPv6 router solicitation.
411rtadvd_enable="NO" # Set to YES to enable an IPv6 router
412 # advertisement daemon. If set to YES,
413 # this router becomes a possible candidate
414 # IPv6 default router for local subnets.
415rtadvd_interfaces="" # Interfaces rtadvd sends RA packets.
416mroute6d_enable="NO" # Do IPv6 multicast routing.
417mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast
418 # routing daemon. You need to
419 # install it from package or
420 # port.
421mroute6d_flags="" # Flags to IPv6 multicast routing daemon.
422stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4
423 # tunneling interface. Specify this entry
424 # to enable 6to4 interface.
425stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr,
426 # to limit peer addr range. Effective value
427 # is 0-31.
428stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0.
429 # If you like, you can set "AUTO" for this.
430stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0
431ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH
432 # IPv6-to-IPv4 TCP translator. You also need
433 # faithd(8) setup.
434ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr
435 # communication. (like ::ffff:a.b.c.d)
436ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall
437 # functionality
438ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall
439ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6)
440ipv6_firewall_quiet="NO" # Set to YES to suppress rule display
441ipv6_firewall_logging="NO" # Set to YES to enable events logging
442ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file
443ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter,
444 # see /usr/src/contrib/ipfilter/rules
445 # for examples
446ip6addrctl_enable="YES" # Set to YES to enable default address selection
447ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages
448
449##############################################################
450### System console options #################################
451##############################################################
452
453keyboard="" # keyboard device to use (default /dev/kbd0).
454keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO).
455keyrate="NO" # keyboard rate to: slow, normal, fast (or NO).
456keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable.
457keychange="NO" # function keys default values (or NO).
458cursor="NO" # cursor type {normal|blink|destructive} (or NO).
459scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO).
460font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO).
461font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO).
462font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO).
463blanktime="300" # blank time (in seconds) or "NO" to turn it off.
464saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko
465moused_nondefault_enable="YES" # Treat non-default mice as enabled unless
466 # specifically overriden in rc.conf(5).
467moused_enable="NO" # Run the mouse daemon.
468moused_type="auto" # See man page for rc.conf(5) for available settings.
469moused_port="/dev/psm0" # Set to your mouse port.
470moused_flags="" # Any additional flags to moused.
471mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your
472 # language code table, specify alternative range
473 # start like mousechar_start=3, see vidcontrol(1)
474allscreens_flags="" # Set this vidcontrol mode for all virtual screens
475allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens
476
477##############################################################
478### Mail Transfer Agent (MTA) options ######################
479##############################################################
480
481mta_start_script="/etc/rc.sendmail"
482 # Script to start your chosen MTA, called by /etc/rc.
483# Settings for /etc/rc.sendmail and /etc/rc.d/sendmail:
484sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO).
485sendmail_pidfile="/var/run/sendmail.pid" # sendmail pid file
486sendmail_procname="/usr/sbin/sendmail" # sendmail process name
487sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server)
488sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission
489sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost"
490 # Flags for localhost-only MTA
491sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO).
492sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only)
493sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO).
494sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m"
495 # Flags for sendmail_msp_queue daemon.
496sendmail_rebuild_aliases="NO" # Run newaliases if necessary (YES/NO).
497
498
499##############################################################
500### Miscellaneous administrative options ###################
501##############################################################
502
503auditd_enable="NO" # Run the audit daemon.
504auditd_program="/usr/sbin/auditd" # Path to the audit daemon.
505auditd_flags="" # Which options to pass to the audit daemon.
506cron_enable="YES" # Run the periodic job daemon.
507cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled).
508cron_dst="YES" # Handle DST transitions intelligently (YES/NO)
509cron_flags="" # Which options to pass to the cron daemon.
510lpd_enable="NO" # Run the line printer daemon.
511lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one.
512lpd_flags="" # Flags to lpd (if enabled).
513nscd_enable="NO" # Run the nsswitch caching daemon.
514chkprintcap_enable="NO" # Run chkprintcap(8) before running lpd.
515chkprintcap_flags="-d" # Create missing directories by default.
516dumpdev="AUTO" # Device to crashdump to (device name, AUTO, or NO).
517dumpdir="/var/crash" # Directory where crash dumps are to be stored
518savecore_flags="" # Used if dumpdev is enabled above, and present.
519enable_quotas="NO" # turn on quotas on startup (or NO).
520check_quotas="YES" # Check quotas on startup (or NO).
521quotaon_flags="-a" # Turn quotas on for all file systems (if enabled)
522quotaoff_flags="-a" # Turn quotas off for all file systems at shutdown
523quotacheck_flags="-a" # Check all file system quotas (if enabled)
524accounting_enable="NO" # Turn on process accounting (or NO).
525ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO).
526ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO).
527
528# Emulation/compatibility services provided by /etc/rc.d/abi
529sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO).
530linux_enable="NO" # Linux binary compatibility loaded at startup (or NO).
531svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO).
532
533clear_tmp_enable="NO" # Clear /tmp at startup.
534clear_tmp_X="YES" # Clear and recreate X11-related directories in /tmp
535ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks
536ldconfig_paths="/usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg"
537 # shared library search paths
538ldconfig32_paths="/usr/lib32" # 32-bit compatibility shared library search paths
539ldconfig_paths_aout="/usr/lib/compat/aout /usr/local/lib/aout"
540 # a.out shared library search paths
541ldconfig_local_dirs="/usr/local/libdata/ldconfig"
542 # Local directories with ldconfig configuration files.
543ldconfig_local32_dirs="/usr/local/libdata/ldconfig32"
544 # Local directories with 32-bit compatibility ldconfig
545 # configuration files.
546kern_securelevel_enable="NO" # kernel security level (see init(8)),
547kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure
548 # Note that setting securelevel to 0 will result
549 # in the system booting with securelevel set to 1, as
550 # init(8) will raise the level when rc(8) completes.
551update_motd="YES" # update version info in /etc/motd (or NO)
552entropy_file="/entropy" # Set to NO to disable caching entropy through reboots.
553 # /var/db/entropy-file is preferred if / is not avail.
554entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron.
555entropy_save_sz="2048" # Size of the entropy cache files.
556entropy_save_num="8" # Number of entropy cache files to save.
557harvest_interrupt="YES" # Entropy device harvests interrupt randomness
558harvest_ethernet="YES" # Entropy device harvests ethernet randomness
559harvest_p_to_p="YES" # Entropy device harvests point-to-point randomness
560dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot
561watchdogd_enable="NO" # Start the software watchdog daemon
562devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing
563 # devfs(8) rules.
564devfs_system_ruleset="" # The name (NOT number) of a ruleset to apply to /dev
565devfs_set_rulesets="" # A list of /mount/dev=ruleset_name settings to
566 # apply (must be mounted already, i.e. fstab(5))
567performance_cx_lowest="HIGH" # Online CPU idle state
568performance_cpu_freq="NONE" # Online CPU frequency
569economy_cx_lowest="HIGH" # Offline CPU idle state
570economy_cpu_freq="NONE" # Offline CPU frequency
571virecover_enable="YES" # Perform housekeeping for the vi(1) editor
572ugidfw_enable="NO" # Load mac_bsdextended(4) rules on boot
573bsdextended_script="/etc/rc.bsdextended" # Default mac_bsdextended(4)
574 # ruleset file.
575newsyslog_enable="YES" # Run newsyslog at startup.
576newsyslog_flags="-CN" # Newsyslog flags to create marked files
577mixer_enable="YES" # Run the sound mixer.
578
579##############################################################
580### Jail Configuration #######################################
581##############################################################
582jail_enable="NO" # Set to NO to disable starting of any jails
583jail_list="" # Space separated list of names of jails
584jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname
585jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail
586jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail
587
588#
589# To use rc's built-in jail infrastructure create entries for
590# each jail, specified in jail_list, with the following variables.
591# NOTES:
592# - replace 'example' with the jail's name.
593# - except rootdir, hostname and ip, all of the following variables may be made
594# global jail variables if you don't specify a jail name (ie. jail_interface).
595#
596#jail_example_rootdir="/usr/jail/default" # Jail's root directory
597#jail_example_hostname="default.domain.com" # Jail's hostname
598#jail_example_ip="192.168.0.10" # Jail's IP number
599#jail_example_interface="" # Interface to create the IP alias on
600#jail_example_exec_start="/bin/sh /etc/rc" # command to execute in jail for starting
601#jail_example_exec_afterstart0="/bin/sh command" # command to execute after the one for
602 # starting the jail. More than one can be
603 # specified using a trailing number
604#jail_example_exec_stop="/bin/sh /etc/rc.shutdown" # command to execute in jail for stopping
605#jail_example_devfs_enable="NO" # mount devfs in the jail
606#jail_example_fdescfs_enable="NO" # mount fdescfs in the jail
607#jail_example_procfs_enable="NO" # mount procfs in jail
608#jail_example_mount_enable="NO" # mount/umount jail's fs
609#jail_example_devfs_ruleset="ruleset_name" # devfs ruleset to apply to jail
610#jail_example_fstab="" # fstab(5) for mount/umount
611#jail_example_flags="-l -U root" # flags for jail(8)
612
613##############################################################
614### Define source_rc_confs, the mechanism used by /etc/rc.* ##
615### scripts to source rc_conf_files overrides safely. ##
616##############################################################
617
618if [ -z "${source_rc_confs_defined}" ]; then
619 source_rc_confs_defined=yes
620 source_rc_confs () {
621 local i sourced_files
622 for i in ${rc_conf_files}; do
623 case ${sourced_files} in
624 *:$i:*)
625 ;;
626 *)
627 sourced_files="${sourced_files}:$i:"
628 if [ -r $i ]; then
629 . $i
630 fi
631 ;;
632 esac
633 done
634 }
635fi
2
3# This is rc.conf - a file full of useful variables that you can set
4# to change the default startup behavior of your system. You should
5# not edit this file! Put any overrides into one of the ${rc_conf_files}
6# instead and you will be able to update these defaults later without
7# spamming your local configuration information.
8#
9# The ${rc_conf_files} files should only contain values which override
10# values set in this file. This eases the upgrade path when defaults
11# are changed and new features are added.
12#
13# All arguments must be in double or single quotes.
14#
15# For a more detailed explanation of all the rc.conf variables, please
16# refer to the rc.conf(5) manual page.
17#
18# $FreeBSD: head/etc/defaults/rc.conf 175722 2008-01-27 15:15:12Z mtm $
19
20##############################################################
21### Important initial Boot-time options ####################
22##############################################################
23
24rc_debug="NO" # Set to YES to enable debugging output from rc.d
25rc_info="NO" # Enables display of informational messages at boot.
26rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown
27early_late_divider="FILESYSTEMS" # Script that separates early/late
28 # stages of the boot process. Make sure you know
29 # the ramifications if you change this.
30 # See rc.conf(5) for more details.
31
32swapfile="NO" # Set to name of swapfile if aux swapfile desired.
33apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO).
34apmd_enable="NO" # Run apmd to handle APM event from userland.
35apmd_flags="" # Flags to apmd (if enabled).
36devd_enable="YES" # Run devd, to trigger programs on device tree changes.
37devd_flags="" # Additional flags for devd(8).
38kldxref_enable="NO" # Build linker.hints files with kldxref(8).
39kldxref_clobber="NO" # Overwrite old linker.hints at boot.
40kldxref_module_path="" # Override kern.module_path. A ';'-delimited list.
41powerd_enable="NO" # Run powerd to lower our power usage.
42powerd_flags="" # Flags to powerd (if enabled).
43tmpmfs="AUTO" # Set to YES to always create an mfs /tmp, NO to never
44tmpsize="20m" # Size of mfs /tmp if created
45tmpmfs_flags="-S" # Extra mdmfs options for the mfs /tmp
46varmfs="AUTO" # Set to YES to always create an mfs /var, NO to never
47varsize="32m" # Size of mfs /var if created
48varmfs_flags="-S" # Extra mount options for the mfs /var
49populate_var="AUTO" # Set to YES to always (re)populate /var, NO to never
50cleanvar_enable="YES" # Clean the /var directory
51local_startup="/usr/local/etc/rc.d" # startup script dirs.
52script_name_sep=" " # Change if your startup scripts' names contain spaces
53rc_conf_files="/etc/rc.conf /etc/rc.conf.local"
54
55# ZFS support
56zfs_enable="NO" # Set to YES to automatically mount ZFS file systems
57
58# Experimental - test before enabling
59gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab
60gbde_devices="NO" # Devices to automatically attach (list, or AUTO)
61gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices
62gbde_lockdir="/etc" # Where to look for gbde lockfiles
63
64# GELI disk encryption configuration.
65geli_devices="" # List of devices to automatically attach in addition to
66 # GELI devices listed in /etc/fstab.
67geli_tries="" # Number of times to attempt attaching geli device.
68 # If empty, kern.geom.eli.tries will be used.
69geli_default_flags="" # Default flags for geli(8).
70geli_autodetach="YES" # Automatically detach on last close.
71 # Providers are marked as such when all file systems are
72 # mounted.
73# Example use.
74#geli_devices="da1 mirror/home"
75#geli_da1_flags="-p -k /etc/geli/da1.keys"
76#geli_da1_autodetach="NO"
77#geli_mirror_home_flags="-k /etc/geli/home.keys"
78
79geli_swap_flags="-e aes -l 256 -s 4096 -d" # Options for GELI-encrypted
80 # swap partitions.
81
82root_rw_mount="YES" # Set to NO to inhibit remounting root read-write.
83fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails.
84background_fsck="YES" # Attempt to run fsck in the background where possible.
85background_fsck_delay="60" # Time to wait (seconds) before starting the fsck.
86netfs_types="nfs:NFS nfs4:NFS4 smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net filesystems.
87extra_netfs_types="NO" # List of network extra filesystem types for delayed
88 # mount at startup (or NO).
89
90##############################################################
91### Network configuration sub-section ######################
92##############################################################
93
94### Basic network and firewall/security options: ###
95hostname="" # Set this!
96hostid_enable="YES" # Set host UUID.
97hostid_file="/etc/hostid" # File with hostuuid.
98nisdomainname="NO" # Set to NIS domain if using NIS (or NO).
99dhclient_program="/sbin/dhclient" # Path to dhcp client program.
100dhclient_flags="" # Extra flags to pass to dhcp client.
101#dhclient_flags_fxp0="" # Extra dhclient flags for fxp0 only
102background_dhclient="NO" # Start dhcp client in the background.
103#background_dhclient_fxp0="YES" # Start dhcp client on fxp0 in the background.
104synchronous_dhclient="YES" # Start dhclient directly on configured
105 # interfaces during startup.
106firewall_enable="NO" # Set to YES to enable firewall functionality
107firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall
108firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall)
109firewall_quiet="NO" # Set to YES to suppress rule display
110firewall_logging="NO" # Set to YES to enable events logging
111firewall_flags="" # Flags passed to ipfw when type is a file
112firewall_myservices="" # List of TCP ports on which this host
113 # offers services
114firewall_allowservices="" # List of IPs which has access to
115 # $firewall_myservices
116firewall_trusted="" # List of IPs which has full access to this host
117firewall_logdeny="NO" # Set to YES to log default denied incoming
118 # packets.
119firewall_nologports="135-139,445 1026,1027 1433,1434" # List of TCP/UDP ports
120 # for which denied incoming packets are not
121 # logged.
122firewall_nat_enable="NO" # Enable kernel NAT (if firewall_enable == YES)
123firewall_nat_interface="" # Public interface or IPaddress to use
124firewall_nat_flags="" # Additional configuration parameters
125dummynet_enable="NO" # Load the dummynet(4) module
126ip_portrange_first="NO" # Set first dynamically allocated port
127ip_portrange_last="NO" # Set last dynamically allocated port
128ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd)
129ike_program="/usr/local/sbin/isakmpd" # Path to IKE daemon
130ike_flags="" # Additional flags for IKE daemon
131ipsec_enable="NO" # Set to YES to run setkey on ipsec_file
132ipsec_file="/etc/ipsec.conf" # Name of config file for setkey
133natd_program="/sbin/natd" # path to natd, if you want a different one.
134natd_enable="NO" # Enable natd (if firewall_enable == YES).
135natd_interface="" # Public interface or IPaddress to use.
136natd_flags="" # Additional flags for natd.
137ipfilter_enable="NO" # Set to YES to enable ipfilter functionality
138ipfilter_program="/sbin/ipf" # where the ipfilter program lives
139ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see
140 # /usr/src/contrib/ipfilter/rules for examples
141ipfilter_flags="" # additional flags for ipfilter
142ipnat_enable="NO" # Set to YES to enable ipnat functionality
143ipnat_program="/sbin/ipnat" # where the ipnat program lives
144ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat
145ipnat_flags="" # additional flags for ipnat
146ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat
147ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives
148ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog"
149ipfs_enable="NO" # Set to YES to enable saving and restoring
150 # of state tables at shutdown and boot
151ipfs_program="/sbin/ipfs" # where the ipfs program lives
152ipfs_flags="" # additional flags for ipfs
153pf_enable="NO" # Set to YES to enable packet filter (pf)
154pf_rules="/etc/pf.conf" # rules definition file for pf
155pf_program="/sbin/pfctl" # where the pfctl program lives
156pf_flags="" # additional flags for pfctl
157pflog_enable="NO" # Set to YES to enable packet filter logging
158pflog_logfile="/var/log/pflog" # where pflogd should store the logfile
159pflog_program="/sbin/pflogd" # where the pflogd program lives
160pflog_flags="" # additional flags for pflogd
161ftpproxy_enable="NO" # Set to YES to enable ftp-proxy(8) for pf
162ftpproxy_flags="" # additional flags for ftp-proxy(8)
163pfsync_enable="NO" # Expose pf state to other hosts for syncing
164pfsync_syncdev="" # Interface for pfsync to work through
165pfsync_syncpeer="" # IP address of pfsync peer host
166pfsync_ifconfig="" # Additional options to ifconfig(8) for pfsync
167tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions.
168log_in_vain="0" # >=1 to log connects to ports w/o listeners.
169tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO).
170tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN
171 # NOTE: this violates the TCP specification
172icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets
173icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets
174network_interfaces="auto" # List of network interfaces (or "auto").
175cloned_interfaces="" # List of cloned network interfaces to create.
176#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config.
177ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration.
178#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
179#ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry.
180#ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0.
181#ipv4_addrs_fxp0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry.
182#
183#autobridge_interfaces="bridge0" # List of bridges to check
184#autobridge_bridge0="tap* vlan0" # Interface glob to automatically add to the bridge
185#
186# If you have any sppp(4) interfaces above, you might also want to set
187# the following parameters. Refer to spppcontrol(8) for their meaning.
188sppp_interfaces="" # List of sppp interfaces.
189#sppp_interfaces="isp0" # example: sppp over ISDN
190#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'"
191gif_interfaces="" # List of GIF tunnels.
192#gif_interfaces="gif0 gif1" # Examples typically for a router.
193 # Choose correct tunnel addrs.
194#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router.
195#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router.
196fec_interfaces="" # List of Fast EtherChannels.
197#fec_interfaces="fec0 fec1"
198#fecconfig_fec0="fxp0 dc0" # Examples typically for two NICs
199#fecconfig_fec1="em0 em1 bge0 bge1" # Examples typically for four NICs
200
201# User ppp configuration.
202ppp_enable="NO" # Start user-ppp (or NO).
203ppp_program="/usr/sbin/ppp" # Path to user-ppp program.
204ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated".
205 # For details see man page for ppp(8). Default is auto.
206ppp_nat="YES" # Use PPP's internal network address translation or NO.
207ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf.
208ppp_user="root" # Which user to run ppp as
209
210# Start multiple instances of ppp at boot time
211#ppp_profile="profile1 profile2 profile3" # Which profiles to use
212#ppp_profile1_mode="ddial" # Override ppp mode for profile1
213#ppp_profile2_nat="NO" # Override nat mode for profile2
214# profile3 uses default ppp_mode and ppp_nat
215
216### Network daemon (miscellaneous) ###
217hostapd_enable="NO" # Run hostap daemon.
218syslogd_enable="YES" # Run syslog daemon (or NO).
219syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one.
220syslogd_flags="-s" # Flags to syslogd (if enabled).
221inetd_enable="NO" # Run the network daemon dispatcher (YES/NO).
222inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one.
223inetd_flags="-wW -C 60" # Optional flags to inetd
224#
225# named. It may be possible to run named in a sandbox, man security for
226# details.
227#
228named_enable="NO" # Run named, the DNS server (or NO).
229named_program="/usr/sbin/named" # path to named, if you want a different one.
230#named_flags="" # Flags for named
231named_pidfile="/var/run/named/pid" # Must set this in named.conf as well
232named_uid="bind" # User to run named as
233named_chrootdir="/var/named" # Chroot directory (or "" not to auto-chroot it)
234named_chroot_autoupdate="YES" # Automatically install/update chrooted
235 # components of named. See /etc/rc.d/named.
236named_symlink_enable="YES" # Symlink the chrooted pid file
237
238#
239# kerberos. Do not run the admin daemons on slave servers
240#
241kerberos5_server_enable="NO" # Run a kerberos 5 master server (or NO).
242kerberos5_server="/usr/libexec/kdc" # path to kerberos 5 KDC
243kerberos5_server_flags="--detach" # Additional flags to the kerberos 5 server
244kadmind5_server_enable="NO" # Run kadmind (or NO)
245kadmind5_server="/usr/libexec/kadmind" # path to kerberos 5 admin daemon
246kpasswdd_server_enable="NO" # Run kpasswdd (or NO)
247kpasswdd_server="/usr/libexec/kpasswdd" # path to kerberos 5 passwd daemon
248
249rwhod_enable="NO" # Run the rwho daemon (or NO).
250rwhod_flags="" # Flags for rwhod
251rarpd_enable="NO" # Run rarpd (or NO).
252rarpd_flags="" # Flags to rarpd.
253bootparamd_enable="NO" # Run bootparamd (or NO).
254bootparamd_flags="" # Flags to bootparamd
255pppoed_enable="NO" # Run the PPP over Ethernet daemon.
256pppoed_provider="*" # Provider and ppp(8) config file entry.
257pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled).
258pppoed_interface="fxp0" # The interface that pppoed runs on.
259sshd_enable="NO" # Enable sshd
260sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one.
261sshd_flags="" # Additional flags for sshd.
262ftpd_enable="NO" # Enable stand-alone ftpd.
263ftpd_program="/usr/libexec/ftpd" # Path to ftpd, if you want a different one.
264ftpd_flags="" # Additional flags to stand-alone ftpd.
265
266### Network daemon (NFS): All need rpcbind_enable="YES" ###
267amd_enable="NO" # Run amd service with $amd_flags (or NO).
268amd_program="/usr/sbin/amd" # path to amd, if you want a different one.
269amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map"
270amd_map_program="NO" # Can be set to "ypcat -k amd.master"
271nfs_client_enable="NO" # This host is an NFS client (or NO).
272nfs_access_cache="60" # Client cache timeout in seconds
273nfs_server_enable="NO" # This host is an NFS server (or NO).
274nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled).
275idmapd_enable="NO" # Run the NFS4 id mapper (YES/NO).
276idmapd_flags="" # Additional flags for idmapd.
277mountd_enable="NO" # Run mountd (or NO).
278mountd_flags="-r" # Flags to mountd (if NFS server enabled).
279weak_mountd_authentication="NO" # Allow non-root mount requests to be served.
280nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO).
281nfs_bufpackets="" # bufspace (in packets) for client
282rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server.
283rpc_lockd_flags="" # Flags to rpc.lockd (if enabled).
284rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server.
285rpc_statd_flags="" # Flags to rpc.statd (if enabled).
286rpcbind_enable="NO" # Run the portmapper service (YES/NO).
287rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one.
288rpcbind_flags="" # Flags to rpcbind (if enabled).
289rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO).
290keyserv_enable="NO" # Run the SecureRPC keyserver (or NO).
291keyserv_flags="" # Flags to keyserv (if enabled).
292
293### Network Time Services options: ###
294timed_enable="NO" # Run the time daemon (or NO).
295timed_flags="" # Flags to timed (if enabled).
296ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO).
297ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one.
298ntpdate_flags="-b" # Flags to ntpdate (if enabled).
299ntpdate_config="/etc/ntp.conf" # ntpdate(8) configuration file
300ntpdate_hosts="" # Whitespace-separated list of ntpdate(8) servers.
301ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO).
302ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one.
303ntpd_config="/etc/ntp.conf" # ntpd(8) configuration file
304ntpd_sync_on_start="NO" # Sync time on ntpd startup, even if offset is high
305ntpd_flags="-p /var/run/ntpd.pid -f /var/db/ntpd.drift"
306 # Flags to ntpd (if enabled).
307
308# Network Information Services (NIS) options: All need rpcbind_enable="YES" ###
309nis_client_enable="NO" # We're an NIS client (or NO).
310nis_client_flags="" # Flags to ypbind (if enabled).
311nis_ypset_enable="NO" # Run ypset at boot time (or NO).
312nis_ypset_flags="" # Flags to ypset (if enabled).
313nis_server_enable="NO" # We're an NIS server (or NO).
314nis_server_flags="" # Flags to ypserv (if enabled).
315nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO).
316nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled).
317nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO).
318nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled).
319
320### SNMP daemon ###
321# Be sure to understand the security implications of running SNMP v1/v2
322# in your network.
323bsnmpd_enable="NO" # Run the SNMP daemon (or NO).
324bsnmpd_flags="" # Flags for bsnmpd.
325
326### Network routing options: ###
327defaultrouter="NO" # Set to default gateway (or NO).
328static_routes="" # Set to static route list (or leave empty).
329natm_static_routes="" # Set to static route list for NATM (or leave empty).
330gateway_enable="NO" # Set to YES if this host will be a gateway.
331router_enable="NO" # Set to YES to enable a routing daemon.
332router="/sbin/routed" # Name of routing daemon to use if enabled.
333router_flags="-q" # Flags for routing daemon.
334mrouted_enable="NO" # Do IPv4 multicast routing.
335mrouted_program="/usr/local/sbin/mrouted" # Name of IPv4 multicast
336 # routing daemon. You need to
337 # install it from package or
338 # port.
339mrouted_flags="" # Flags for multicast routing daemon.
340ipxgateway_enable="NO" # Set to YES to enable IPX routing.
341ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon.
342ipxrouted_flags="" # Flags for IPX routing daemon.
343arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL.
344forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES")
345accept_sourceroute="NO" # accept source routed packets to us
346
347### ATM interface options: ###
348atm_enable="NO" # Configure ATM interfaces (or NO).
349#atm_netif_hea0="atm 1" # Network interfaces for physical interface.
350#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface.
351#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI).
352#atm_macaddr_hea0="NO" # Override physical MAC address (or NO).
353#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local).
354#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO).
355atm_pvcs="" # Set to PVC list (or leave empty).
356atm_arps="" # Set to permanent ARP list (or leave empty).
357
358### ISDN interface options: (see also: /usr/share/examples/isdn) ###
359isdn_enable="NO" # Enable the ISDN subsystem (or NO).
360isdn_fsdev="NO" # Output device for fullscreen mode (or NO for daemon mode).
361isdn_flags="-dn -d0x1f9" # Flags for isdnd
362isdn_ttype="cons25" # terminal type for fullscreen mode
363isdn_screenflags="NO" # screenflags for ${isdn_fsdev}
364isdn_trace="NO" # Enable the ISDN trace subsystem (or NO).
365isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace
366
367### Bluetooth ###
368hcsecd_enable="NO" # Enable hcsecd(8) (or NO)
369hcsecd_config="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file
370
371sdpd_enable="NO" # Enable sdpd(8) (or NO)
372sdpd_control="/var/run/sdp" # sdpd(8) control socket
373sdpd_groupname="nobody" # set spdp(8) user/group to run as after
374sdpd_username="nobody" # it initializes
375
376bthidd_enable="NO" # Enable bthidd(8) (or NO)
377bthidd_config="/etc/bluetooth/bthidd.conf" # bthidd(8) configuration file
378bthidd_hids="/var/db/bthidd.hids" # bthidd(8) known HID devices file
379
380### Miscellaneous network options: ###
381icmp_bmcastecho="NO" # respond to broadcast ping packets
382
383### IPv6 options: ###
384ipv6_enable="NO" # Set to YES to set up for IPv6.
385ipv6_network_interfaces="auto" # List of network interfaces (or "auto").
386ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO).
387#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068)
388ipv6_static_routes="" # Set to static route list (or leave empty).
389#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64
390 # route toward loopback interface.
391#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1"
392ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway.
393ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon.
394ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon.
395ipv6_router_flags="" # Flags to IPv6 routing daemon.
396#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local
397 # addrs.
398#ipv6_router_flags="-q" # If you want to run a routing daemon on an end
399 # node, you should stop advertisement.
400#ipv6_network_interfaces="ed0 ep0" # Examples for router
401 # or static configuration for end node.
402 # Choose correct prefix value.
403#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr.
404#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr.
405#ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry
406#ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry.
407ipv6_default_interface="NO" # Default output interface for scoped addrs.
408 # Now this works only for IPv6 link local
409 # multicast addrs.
410rtsol_flags="" # Flags to IPv6 router solicitation.
411rtadvd_enable="NO" # Set to YES to enable an IPv6 router
412 # advertisement daemon. If set to YES,
413 # this router becomes a possible candidate
414 # IPv6 default router for local subnets.
415rtadvd_interfaces="" # Interfaces rtadvd sends RA packets.
416mroute6d_enable="NO" # Do IPv6 multicast routing.
417mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast
418 # routing daemon. You need to
419 # install it from package or
420 # port.
421mroute6d_flags="" # Flags to IPv6 multicast routing daemon.
422stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4
423 # tunneling interface. Specify this entry
424 # to enable 6to4 interface.
425stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr,
426 # to limit peer addr range. Effective value
427 # is 0-31.
428stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0.
429 # If you like, you can set "AUTO" for this.
430stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0
431ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH
432 # IPv6-to-IPv4 TCP translator. You also need
433 # faithd(8) setup.
434ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr
435 # communication. (like ::ffff:a.b.c.d)
436ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall
437 # functionality
438ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall
439ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6)
440ipv6_firewall_quiet="NO" # Set to YES to suppress rule display
441ipv6_firewall_logging="NO" # Set to YES to enable events logging
442ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file
443ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter,
444 # see /usr/src/contrib/ipfilter/rules
445 # for examples
446ip6addrctl_enable="YES" # Set to YES to enable default address selection
447ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages
448
449##############################################################
450### System console options #################################
451##############################################################
452
453keyboard="" # keyboard device to use (default /dev/kbd0).
454keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO).
455keyrate="NO" # keyboard rate to: slow, normal, fast (or NO).
456keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable.
457keychange="NO" # function keys default values (or NO).
458cursor="NO" # cursor type {normal|blink|destructive} (or NO).
459scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO).
460font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO).
461font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO).
462font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO).
463blanktime="300" # blank time (in seconds) or "NO" to turn it off.
464saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko
465moused_nondefault_enable="YES" # Treat non-default mice as enabled unless
466 # specifically overriden in rc.conf(5).
467moused_enable="NO" # Run the mouse daemon.
468moused_type="auto" # See man page for rc.conf(5) for available settings.
469moused_port="/dev/psm0" # Set to your mouse port.
470moused_flags="" # Any additional flags to moused.
471mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your
472 # language code table, specify alternative range
473 # start like mousechar_start=3, see vidcontrol(1)
474allscreens_flags="" # Set this vidcontrol mode for all virtual screens
475allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens
476
477##############################################################
478### Mail Transfer Agent (MTA) options ######################
479##############################################################
480
481mta_start_script="/etc/rc.sendmail"
482 # Script to start your chosen MTA, called by /etc/rc.
483# Settings for /etc/rc.sendmail and /etc/rc.d/sendmail:
484sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO).
485sendmail_pidfile="/var/run/sendmail.pid" # sendmail pid file
486sendmail_procname="/usr/sbin/sendmail" # sendmail process name
487sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server)
488sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission
489sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost"
490 # Flags for localhost-only MTA
491sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO).
492sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only)
493sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO).
494sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m"
495 # Flags for sendmail_msp_queue daemon.
496sendmail_rebuild_aliases="NO" # Run newaliases if necessary (YES/NO).
497
498
499##############################################################
500### Miscellaneous administrative options ###################
501##############################################################
502
503auditd_enable="NO" # Run the audit daemon.
504auditd_program="/usr/sbin/auditd" # Path to the audit daemon.
505auditd_flags="" # Which options to pass to the audit daemon.
506cron_enable="YES" # Run the periodic job daemon.
507cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled).
508cron_dst="YES" # Handle DST transitions intelligently (YES/NO)
509cron_flags="" # Which options to pass to the cron daemon.
510lpd_enable="NO" # Run the line printer daemon.
511lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one.
512lpd_flags="" # Flags to lpd (if enabled).
513nscd_enable="NO" # Run the nsswitch caching daemon.
514chkprintcap_enable="NO" # Run chkprintcap(8) before running lpd.
515chkprintcap_flags="-d" # Create missing directories by default.
516dumpdev="AUTO" # Device to crashdump to (device name, AUTO, or NO).
517dumpdir="/var/crash" # Directory where crash dumps are to be stored
518savecore_flags="" # Used if dumpdev is enabled above, and present.
519enable_quotas="NO" # turn on quotas on startup (or NO).
520check_quotas="YES" # Check quotas on startup (or NO).
521quotaon_flags="-a" # Turn quotas on for all file systems (if enabled)
522quotaoff_flags="-a" # Turn quotas off for all file systems at shutdown
523quotacheck_flags="-a" # Check all file system quotas (if enabled)
524accounting_enable="NO" # Turn on process accounting (or NO).
525ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO).
526ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO).
527
528# Emulation/compatibility services provided by /etc/rc.d/abi
529sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO).
530linux_enable="NO" # Linux binary compatibility loaded at startup (or NO).
531svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO).
532
533clear_tmp_enable="NO" # Clear /tmp at startup.
534clear_tmp_X="YES" # Clear and recreate X11-related directories in /tmp
535ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks
536ldconfig_paths="/usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg"
537 # shared library search paths
538ldconfig32_paths="/usr/lib32" # 32-bit compatibility shared library search paths
539ldconfig_paths_aout="/usr/lib/compat/aout /usr/local/lib/aout"
540 # a.out shared library search paths
541ldconfig_local_dirs="/usr/local/libdata/ldconfig"
542 # Local directories with ldconfig configuration files.
543ldconfig_local32_dirs="/usr/local/libdata/ldconfig32"
544 # Local directories with 32-bit compatibility ldconfig
545 # configuration files.
546kern_securelevel_enable="NO" # kernel security level (see init(8)),
547kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure
548 # Note that setting securelevel to 0 will result
549 # in the system booting with securelevel set to 1, as
550 # init(8) will raise the level when rc(8) completes.
551update_motd="YES" # update version info in /etc/motd (or NO)
552entropy_file="/entropy" # Set to NO to disable caching entropy through reboots.
553 # /var/db/entropy-file is preferred if / is not avail.
554entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron.
555entropy_save_sz="2048" # Size of the entropy cache files.
556entropy_save_num="8" # Number of entropy cache files to save.
557harvest_interrupt="YES" # Entropy device harvests interrupt randomness
558harvest_ethernet="YES" # Entropy device harvests ethernet randomness
559harvest_p_to_p="YES" # Entropy device harvests point-to-point randomness
560dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot
561watchdogd_enable="NO" # Start the software watchdog daemon
562devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing
563 # devfs(8) rules.
564devfs_system_ruleset="" # The name (NOT number) of a ruleset to apply to /dev
565devfs_set_rulesets="" # A list of /mount/dev=ruleset_name settings to
566 # apply (must be mounted already, i.e. fstab(5))
567performance_cx_lowest="HIGH" # Online CPU idle state
568performance_cpu_freq="NONE" # Online CPU frequency
569economy_cx_lowest="HIGH" # Offline CPU idle state
570economy_cpu_freq="NONE" # Offline CPU frequency
571virecover_enable="YES" # Perform housekeeping for the vi(1) editor
572ugidfw_enable="NO" # Load mac_bsdextended(4) rules on boot
573bsdextended_script="/etc/rc.bsdextended" # Default mac_bsdextended(4)
574 # ruleset file.
575newsyslog_enable="YES" # Run newsyslog at startup.
576newsyslog_flags="-CN" # Newsyslog flags to create marked files
577mixer_enable="YES" # Run the sound mixer.
578
579##############################################################
580### Jail Configuration #######################################
581##############################################################
582jail_enable="NO" # Set to NO to disable starting of any jails
583jail_list="" # Space separated list of names of jails
584jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname
585jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail
586jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail
587
588#
589# To use rc's built-in jail infrastructure create entries for
590# each jail, specified in jail_list, with the following variables.
591# NOTES:
592# - replace 'example' with the jail's name.
593# - except rootdir, hostname and ip, all of the following variables may be made
594# global jail variables if you don't specify a jail name (ie. jail_interface).
595#
596#jail_example_rootdir="/usr/jail/default" # Jail's root directory
597#jail_example_hostname="default.domain.com" # Jail's hostname
598#jail_example_ip="192.168.0.10" # Jail's IP number
599#jail_example_interface="" # Interface to create the IP alias on
600#jail_example_exec_start="/bin/sh /etc/rc" # command to execute in jail for starting
601#jail_example_exec_afterstart0="/bin/sh command" # command to execute after the one for
602 # starting the jail. More than one can be
603 # specified using a trailing number
604#jail_example_exec_stop="/bin/sh /etc/rc.shutdown" # command to execute in jail for stopping
605#jail_example_devfs_enable="NO" # mount devfs in the jail
606#jail_example_fdescfs_enable="NO" # mount fdescfs in the jail
607#jail_example_procfs_enable="NO" # mount procfs in jail
608#jail_example_mount_enable="NO" # mount/umount jail's fs
609#jail_example_devfs_ruleset="ruleset_name" # devfs ruleset to apply to jail
610#jail_example_fstab="" # fstab(5) for mount/umount
611#jail_example_flags="-l -U root" # flags for jail(8)
612
613##############################################################
614### Define source_rc_confs, the mechanism used by /etc/rc.* ##
615### scripts to source rc_conf_files overrides safely. ##
616##############################################################
617
618if [ -z "${source_rc_confs_defined}" ]; then
619 source_rc_confs_defined=yes
620 source_rc_confs () {
621 local i sourced_files
622 for i in ${rc_conf_files}; do
623 case ${sourced_files} in
624 *:$i:*)
625 ;;
626 *)
627 sourced_files="${sourced_files}:$i:"
628 if [ -r $i ]; then
629 . $i
630 fi
631 ;;
632 esac
633 done
634 }
635fi