1# Makefile.in generated by automake 1.14 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2013 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17# $Id: Makefile.am 714 2013-08-19 15:30:21Z des $
18VPATH = @srcdir@
19am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
20am__make_running_with_option = \
21 case $${target_option-} in \
22 ?) ;; \
23 *) echo "am__make_running_with_option: internal error: invalid" \
24 "target option '$${target_option-}' specified" >&2; \
25 exit 1;; \
26 esac; \
27 has_opt=no; \
28 sane_makeflags=$$MAKEFLAGS; \
29 if $(am__is_gnu_make); then \
30 sane_makeflags=$$MFLAGS; \
31 else \
32 case $$MAKEFLAGS in \
33 *\\[\ \ ]*) \
34 bs=\\; \
35 sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
36 | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
37 esac; \
38 fi; \
39 skip_next=no; \
40 strip_trailopt () \
41 { \
42 flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
43 }; \
44 for flg in $$sane_makeflags; do \
45 test $$skip_next = yes && { skip_next=no; continue; }; \
46 case $$flg in \
47 *=*|--*) continue;; \
48 -*I) strip_trailopt 'I'; skip_next=yes;; \
49 -*I?*) strip_trailopt 'I';; \
50 -*O) strip_trailopt 'O'; skip_next=yes;; \
51 -*O?*) strip_trailopt 'O';; \
52 -*l) strip_trailopt 'l'; skip_next=yes;; \
53 -*l?*) strip_trailopt 'l';; \
54 -[dEDm]) skip_next=yes;; \
55 -[JT]) skip_next=yes;; \
56 esac; \
57 case $$flg in \
58 *$$target_option*) has_opt=yes; break;; \
59 esac; \
60 done; \
61 test $$has_opt = yes
62am__make_dryrun = (target_option=n; $(am__make_running_with_option))
63am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
64pkgdatadir = $(datadir)/@PACKAGE@
65pkgincludedir = $(includedir)/@PACKAGE@
66pkglibdir = $(libdir)/@PACKAGE@
67pkglibexecdir = $(libexecdir)/@PACKAGE@
68am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
69install_sh_DATA = $(install_sh) -c -m 644
70install_sh_PROGRAM = $(install_sh) -c
71install_sh_SCRIPT = $(install_sh) -c
72INSTALL_HEADER = $(INSTALL_DATA)
73transform = $(program_transform_name)
74NORMAL_INSTALL = :
75PRE_INSTALL = :
76POST_INSTALL = :
77NORMAL_UNINSTALL = :
78PRE_UNINSTALL = :
79POST_UNINSTALL = :
80build_triplet = @build@
81host_triplet = @host@
82@WITH_PAM_UNIX_TRUE@am__append_1 = pam_unix
83subdir = modules
84DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
85ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
|
87am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
88 $(ACLOCAL_M4)
89mkinstalldirs = $(install_sh) -d
90CONFIG_HEADER = $(top_builddir)/config.h
91CONFIG_CLEAN_FILES =
92CONFIG_CLEAN_VPATH_FILES =
93AM_V_P = $(am__v_P_@AM_V@)
94am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
95am__v_P_0 = false
96am__v_P_1 = :
97AM_V_GEN = $(am__v_GEN_@AM_V@)
98am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
99am__v_GEN_0 = @echo " GEN " $@;
100am__v_GEN_1 =
101AM_V_at = $(am__v_at_@AM_V@)
102am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
103am__v_at_0 = @
104am__v_at_1 =
105SOURCES =
106DIST_SOURCES =
107RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
108 ctags-recursive dvi-recursive html-recursive info-recursive \
109 install-data-recursive install-dvi-recursive \
110 install-exec-recursive install-html-recursive \
111 install-info-recursive install-pdf-recursive \
112 install-ps-recursive install-recursive installcheck-recursive \
113 installdirs-recursive pdf-recursive ps-recursive \
114 tags-recursive uninstall-recursive
115am__can_run_installinfo = \
116 case $$AM_UPDATE_INFO_DIR in \
117 n|no|NO) false;; \
118 *) (install-info --version) >/dev/null 2>&1;; \
119 esac
120RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
121 distclean-recursive maintainer-clean-recursive
122am__recursive_targets = \
123 $(RECURSIVE_TARGETS) \
124 $(RECURSIVE_CLEAN_TARGETS) \
125 $(am__extra_recursive_targets)
126AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
127 distdir
128am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
129# Read a list of newline-separated strings from the standard input,
130# and print each of them once, without duplicates. Input order is
131# *not* preserved.
132am__uniquify_input = $(AWK) '\
133 BEGIN { nonempty = 0; } \
134 { items[$$0] = 1; nonempty = 1; } \
135 END { if (nonempty) { for (i in items) print i; }; } \
136'
137# Make sure the list of sources is unique. This is necessary because,
138# e.g., the same source file might be shared among _SOURCES variables
139# for different programs/libraries.
140am__define_uniq_tagged_files = \
141 list='$(am__tagged_files)'; \
142 unique=`for i in $$list; do \
143 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
144 done | $(am__uniquify_input)`
145ETAGS = etags
146CTAGS = ctags
147DIST_SUBDIRS = pam_deny pam_permit pam_unix
148DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
149am__relativize = \
150 dir0=`pwd`; \
151 sed_first='s,^\([^/]*\)/.*$$,\1,'; \
152 sed_rest='s,^[^/]*/*,,'; \
153 sed_last='s,^.*/\([^/]*\)$$,\1,'; \
154 sed_butlast='s,/*[^/]*$$,,'; \
155 while test -n "$$dir1"; do \
156 first=`echo "$$dir1" | sed -e "$$sed_first"`; \
157 if test "$$first" != "."; then \
158 if test "$$first" = ".."; then \
159 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
160 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
161 else \
162 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
163 if test "$$first2" = "$$first"; then \
164 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
165 else \
166 dir2="../$$dir2"; \
167 fi; \
168 dir0="$$dir0"/"$$first"; \
169 fi; \
170 fi; \
171 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
172 done; \
173 reldir="$$dir2"
174ACLOCAL = @ACLOCAL@
175AMTAR = @AMTAR@
176AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
177AR = @AR@
178AUTOCONF = @AUTOCONF@
179AUTOHEADER = @AUTOHEADER@
180AUTOMAKE = @AUTOMAKE@
181AWK = @AWK@
182CC = @CC@
183CCDEPMODE = @CCDEPMODE@
184CFLAGS = @CFLAGS@
185CPP = @CPP@
186CPPFLAGS = @CPPFLAGS@
187CRYPTO_LIBS = @CRYPTO_LIBS@
188CRYPT_LIBS = @CRYPT_LIBS@
189CYGPATH_W = @CYGPATH_W@
190DEFS = @DEFS@
191DEPDIR = @DEPDIR@
192DLLTOOL = @DLLTOOL@
193DL_LIBS = @DL_LIBS@
194DSYMUTIL = @DSYMUTIL@
195DUMPBIN = @DUMPBIN@
196ECHO_C = @ECHO_C@
197ECHO_N = @ECHO_N@
198ECHO_T = @ECHO_T@
199EGREP = @EGREP@
200EXEEXT = @EXEEXT@
201FGREP = @FGREP@
202GREP = @GREP@
203INSTALL = @INSTALL@
204INSTALL_DATA = @INSTALL_DATA@
205INSTALL_PROGRAM = @INSTALL_PROGRAM@
206INSTALL_SCRIPT = @INSTALL_SCRIPT@
207INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
208LD = @LD@
209LDFLAGS = @LDFLAGS@
210LIBOBJS = @LIBOBJS@
211LIBS = @LIBS@
212LIBTOOL = @LIBTOOL@
213LIB_MAJ = @LIB_MAJ@
214LIPO = @LIPO@
215LN_S = @LN_S@
216LTLIBOBJS = @LTLIBOBJS@
217MAKEINFO = @MAKEINFO@
218MANIFEST_TOOL = @MANIFEST_TOOL@
219MKDIR_P = @MKDIR_P@
220NM = @NM@
221NMEDIT = @NMEDIT@
222OBJDUMP = @OBJDUMP@
223OBJEXT = @OBJEXT@
224OPENPAM_MODULES_DIR = @OPENPAM_MODULES_DIR@
225OTOOL = @OTOOL@
226OTOOL64 = @OTOOL64@
227PACKAGE = @PACKAGE@
228PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
229PACKAGE_NAME = @PACKAGE_NAME@
230PACKAGE_STRING = @PACKAGE_STRING@
231PACKAGE_TARNAME = @PACKAGE_TARNAME@
232PACKAGE_URL = @PACKAGE_URL@
233PACKAGE_VERSION = @PACKAGE_VERSION@
234PATH_SEPARATOR = @PATH_SEPARATOR@
235RANLIB = @RANLIB@
236SED = @SED@
237SET_MAKE = @SET_MAKE@
238SHELL = @SHELL@
239STRIP = @STRIP@
240VERSION = @VERSION@
241abs_builddir = @abs_builddir@
242abs_srcdir = @abs_srcdir@
243abs_top_builddir = @abs_top_builddir@
244abs_top_srcdir = @abs_top_srcdir@
245ac_ct_AR = @ac_ct_AR@
246ac_ct_CC = @ac_ct_CC@
247ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
248am__include = @am__include@
249am__leading_dot = @am__leading_dot@
250am__quote = @am__quote@
251am__tar = @am__tar@
252am__untar = @am__untar@
253bindir = @bindir@
254build = @build@
255build_alias = @build_alias@
256build_cpu = @build_cpu@
257build_os = @build_os@
258build_vendor = @build_vendor@
259builddir = @builddir@
260datadir = @datadir@
261datarootdir = @datarootdir@
262docdir = @docdir@
263dvidir = @dvidir@
264exec_prefix = @exec_prefix@
265host = @host@
266host_alias = @host_alias@
267host_cpu = @host_cpu@
268host_os = @host_os@
269host_vendor = @host_vendor@
270htmldir = @htmldir@
271includedir = @includedir@
272infodir = @infodir@
273install_sh = @install_sh@
274libdir = @libdir@
275libexecdir = @libexecdir@
276localedir = @localedir@
277localstatedir = @localstatedir@
278mandir = @mandir@
279mkdir_p = @mkdir_p@
280oldincludedir = @oldincludedir@
281pdfdir = @pdfdir@
282prefix = @prefix@
283program_transform_name = @program_transform_name@
284psdir = @psdir@
285sbindir = @sbindir@
286sharedstatedir = @sharedstatedir@
287srcdir = @srcdir@
288sysconfdir = @sysconfdir@
289target_alias = @target_alias@
290top_build_prefix = @top_build_prefix@
291top_builddir = @top_builddir@
292top_srcdir = @top_srcdir@
293SUBDIRS = pam_deny pam_permit $(am__append_1)
294all: all-recursive
295
296.SUFFIXES:
297$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
298 @for dep in $?; do \
299 case '$(am__configure_deps)' in \
300 *$$dep*) \
301 ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
302 && { if test -f $@; then exit 0; else break; fi; }; \
303 exit 1;; \
304 esac; \
305 done; \
306 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign modules/Makefile'; \
307 $(am__cd) $(top_srcdir) && \
308 $(AUTOMAKE) --foreign modules/Makefile
309.PRECIOUS: Makefile
310Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
311 @case '$?' in \
312 *config.status*) \
313 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
314 *) \
315 echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
316 cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
317 esac;
318
319$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
320 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
321
322$(top_srcdir)/configure: $(am__configure_deps)
323 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
324$(ACLOCAL_M4): $(am__aclocal_m4_deps)
325 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
326$(am__aclocal_m4_deps):
327
328mostlyclean-libtool:
329 -rm -f *.lo
330
331clean-libtool:
332 -rm -rf .libs _libs
333
334# This directory's subdirectories are mostly independent; you can cd
335# into them and run 'make' without going through this Makefile.
336# To change the values of 'make' variables: instead of editing Makefiles,
337# (1) if the variable is set in 'config.status', edit 'config.status'
338# (which will cause the Makefiles to be regenerated when you run 'make');
339# (2) otherwise, pass the desired values on the 'make' command line.
340$(am__recursive_targets):
341 @fail=; \
342 if $(am__make_keepgoing); then \
343 failcom='fail=yes'; \
344 else \
345 failcom='exit 1'; \
346 fi; \
347 dot_seen=no; \
348 target=`echo $@ | sed s/-recursive//`; \
349 case "$@" in \
350 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
351 *) list='$(SUBDIRS)' ;; \
352 esac; \
353 for subdir in $$list; do \
354 echo "Making $$target in $$subdir"; \
355 if test "$$subdir" = "."; then \
356 dot_seen=yes; \
357 local_target="$$target-am"; \
358 else \
359 local_target="$$target"; \
360 fi; \
361 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
362 || eval $$failcom; \
363 done; \
364 if test "$$dot_seen" = "no"; then \
365 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
366 fi; test -z "$$fail"
367
368ID: $(am__tagged_files)
369 $(am__define_uniq_tagged_files); mkid -fID $$unique
370tags: tags-recursive
371TAGS: tags
372
373tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
374 set x; \
375 here=`pwd`; \
376 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
377 include_option=--etags-include; \
378 empty_fix=.; \
379 else \
380 include_option=--include; \
381 empty_fix=; \
382 fi; \
383 list='$(SUBDIRS)'; for subdir in $$list; do \
384 if test "$$subdir" = .; then :; else \
385 test ! -f $$subdir/TAGS || \
386 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
387 fi; \
388 done; \
389 $(am__define_uniq_tagged_files); \
390 shift; \
391 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
392 test -n "$$unique" || unique=$$empty_fix; \
393 if test $$# -gt 0; then \
394 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
395 "$$@" $$unique; \
396 else \
397 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
398 $$unique; \
399 fi; \
400 fi
401ctags: ctags-recursive
402
403CTAGS: ctags
404ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
405 $(am__define_uniq_tagged_files); \
406 test -z "$(CTAGS_ARGS)$$unique" \
407 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
408 $$unique
409
410GTAGS:
411 here=`$(am__cd) $(top_builddir) && pwd` \
412 && $(am__cd) $(top_srcdir) \
413 && gtags -i $(GTAGS_ARGS) "$$here"
414cscopelist: cscopelist-recursive
415
416cscopelist-am: $(am__tagged_files)
417 list='$(am__tagged_files)'; \
418 case "$(srcdir)" in \
419 [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
420 *) sdir=$(subdir)/$(srcdir) ;; \
421 esac; \
422 for i in $$list; do \
423 if test -f "$$i"; then \
424 echo "$(subdir)/$$i"; \
425 else \
426 echo "$$sdir/$$i"; \
427 fi; \
428 done >> $(top_builddir)/cscope.files
429
430distclean-tags:
431 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
432
433distdir: $(DISTFILES)
434 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
435 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
436 list='$(DISTFILES)'; \
437 dist_files=`for file in $$list; do echo $$file; done | \
438 sed -e "s|^$$srcdirstrip/||;t" \
439 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
440 case $$dist_files in \
441 */*) $(MKDIR_P) `echo "$$dist_files" | \
442 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
443 sort -u` ;; \
444 esac; \
445 for file in $$dist_files; do \
446 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
447 if test -d $$d/$$file; then \
448 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
449 if test -d "$(distdir)/$$file"; then \
450 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
451 fi; \
452 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
453 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
454 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
455 fi; \
456 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
457 else \
458 test -f "$(distdir)/$$file" \
459 || cp -p $$d/$$file "$(distdir)/$$file" \
460 || exit 1; \
461 fi; \
462 done
463 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
464 if test "$$subdir" = .; then :; else \
465 $(am__make_dryrun) \
466 || test -d "$(distdir)/$$subdir" \
467 || $(MKDIR_P) "$(distdir)/$$subdir" \
468 || exit 1; \
469 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
470 $(am__relativize); \
471 new_distdir=$$reldir; \
472 dir1=$$subdir; dir2="$(top_distdir)"; \
473 $(am__relativize); \
474 new_top_distdir=$$reldir; \
475 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
476 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
477 ($(am__cd) $$subdir && \
478 $(MAKE) $(AM_MAKEFLAGS) \
479 top_distdir="$$new_top_distdir" \
480 distdir="$$new_distdir" \
481 am__remove_distdir=: \
482 am__skip_length_check=: \
483 am__skip_mode_fix=: \
484 distdir) \
485 || exit 1; \
486 fi; \
487 done
488check-am: all-am
489check: check-recursive
490all-am: Makefile
491installdirs: installdirs-recursive
492installdirs-am:
493install: install-recursive
494install-exec: install-exec-recursive
495install-data: install-data-recursive
496uninstall: uninstall-recursive
497
498install-am: all-am
499 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
500
501installcheck: installcheck-recursive
502install-strip:
503 if test -z '$(STRIP)'; then \
504 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
505 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
506 install; \
507 else \
508 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
509 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
510 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
511 fi
512mostlyclean-generic:
513
514clean-generic:
515
516distclean-generic:
517 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
518 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
519
520maintainer-clean-generic:
521 @echo "This command is intended for maintainers to use"
522 @echo "it deletes files that may require special tools to rebuild."
523clean: clean-recursive
524
525clean-am: clean-generic clean-libtool mostlyclean-am
526
527distclean: distclean-recursive
528 -rm -f Makefile
529distclean-am: clean-am distclean-generic distclean-tags
530
531dvi: dvi-recursive
532
533dvi-am:
534
535html: html-recursive
536
537html-am:
538
539info: info-recursive
540
541info-am:
542
543install-data-am:
544
545install-dvi: install-dvi-recursive
546
547install-dvi-am:
548
549install-exec-am:
550
551install-html: install-html-recursive
552
553install-html-am:
554
555install-info: install-info-recursive
556
557install-info-am:
558
559install-man:
560
561install-pdf: install-pdf-recursive
562
563install-pdf-am:
564
565install-ps: install-ps-recursive
566
567install-ps-am:
568
569installcheck-am:
570
571maintainer-clean: maintainer-clean-recursive
572 -rm -f Makefile
573maintainer-clean-am: distclean-am maintainer-clean-generic
574
575mostlyclean: mostlyclean-recursive
576
577mostlyclean-am: mostlyclean-generic mostlyclean-libtool
578
579pdf: pdf-recursive
580
581pdf-am:
582
583ps: ps-recursive
584
585ps-am:
586
587uninstall-am:
588
589.MAKE: $(am__recursive_targets) install-am install-strip
590
591.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
592 check-am clean clean-generic clean-libtool cscopelist-am ctags \
593 ctags-am distclean distclean-generic distclean-libtool \
594 distclean-tags distdir dvi dvi-am html html-am info info-am \
595 install install-am install-data install-data-am install-dvi \
596 install-dvi-am install-exec install-exec-am install-html \
597 install-html-am install-info install-info-am install-man \
598 install-pdf install-pdf-am install-ps install-ps-am \
599 install-strip installcheck installcheck-am installdirs \
600 installdirs-am maintainer-clean maintainer-clean-generic \
601 mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
602 ps ps-am tags tags-am uninstall uninstall-am
603
604
605# Tell versions [3.59,3.63) of GNU make to not export all variables.
606# Otherwise a system limit (for SysV at least) may be exceeded.
607.NOEXPORT:
|