2.SH NAME 3less \- opposite of more 4.SH SYNOPSIS 5.B "less \-?" 6.br 7.B "less \-\-help" 8.br 9.B "less \-V" 10.br 11.B "less \-\-version" 12.br 13.B "less [\-[+]aBcCdeEfFgGiIJKLmMnNqQrRsSuUVwWX~]" 14.br 15.B " [\-b \fIspace\fP] [\-h \fIlines\fP] [\-j \fIline\fP] [\-k \fIkeyfile\fP]" 16.br 17.B " [\-{oO} \fIlogfile\fP] [\-p \fIpattern\fP] [\-P \fIprompt\fP] [\-t \fItag\fP]" 18.br 19.B " [\-T \fItagsfile\fP] [\-x \fItab\fP,...] [\-y \fIlines\fP] [\-[z] \fIlines\fP]" 20.br 21.B " [\-# \fIshift\fP] [+[+]\fIcmd\fP] [\-\-] [\fIfilename\fP]..." 22.br 23(See the OPTIONS section for alternate option syntax with long option names.) 24 25.SH DESCRIPTION 26.I Less 27is a program similar to 28.I more 29(1), but which allows backward movement 30in the file as well as forward movement. 31Also, 32.I less 33does not have to read the entire input file before starting, 34so with large input files it starts up faster than text editors like 35.I vi 36(1). 37.I Less 38uses termcap (or terminfo on some systems), 39so it can run on a variety of terminals. 40There is even limited support for hardcopy terminals. 41(On a hardcopy terminal, lines which should be printed at the top 42of the screen are prefixed with a caret.) 43.PP 44Commands are based on both 45.I more 46and 47.I vi. 48Commands may be preceded by a decimal number, 49called N in the descriptions below. 50The number is used by some commands, as indicated. 51 52.SH COMMANDS 53In the following descriptions, ^X means control-X. 54ESC stands for the ESCAPE key; for example ESC-v means the 55two character sequence "ESCAPE", then "v". 56.IP "h or H" 57Help: display a summary of these commands. 58If you forget all the other commands, remember this one. 59.IP "SPACE or ^V or f or ^F" 60Scroll forward N lines, default one window (see option \-z below). 61If N is more than the screen size, only the final screenful is displayed. 62Warning: some systems use ^V as a special literalization character. 63.IP "z" 64Like SPACE, but if N is specified, it becomes the new window size. 65.IP "ESC-SPACE" 66Like SPACE, but scrolls a full screenful, even if it reaches 67end-of-file in the process. 68.IP "RETURN or ^N or e or ^E or j or ^J" 69Scroll forward N lines, default 1. 70The entire N lines are displayed, even if N is more than the screen size. 71.IP "d or ^D" 72Scroll forward N lines, default one half of the screen size. 73If N is specified, it becomes the new default for 74subsequent d and u commands. 75.IP "b or ^B or ESC-v" 76Scroll backward N lines, default one window (see option \-z below). 77If N is more than the screen size, only the final screenful is displayed. 78.IP "w" 79Like ESC-v, but if N is specified, it becomes the new window size. 80.IP "y or ^Y or ^P or k or ^K" 81Scroll backward N lines, default 1. 82The entire N lines are displayed, even if N is more than the screen size. 83Warning: some systems use ^Y as a special job control character. 84.IP "u or ^U" 85Scroll backward N lines, default one half of the screen size. 86If N is specified, it becomes the new default for 87subsequent d and u commands. 88.IP "ESC-) or RIGHTARROW" 89Scroll horizontally right N characters, default half the screen width 90(see the \-# option). 91If a number N is specified, it becomes the default for future RIGHTARROW 92and LEFTARROW commands. 93While the text is scrolled, it acts as though the \-S option 94(chop lines) were in effect. 95.IP "ESC-( or LEFTARROW" 96Scroll horizontally left N characters, default half the screen width 97(see the \-# option). 98If a number N is specified, it becomes the default for future RIGHTARROW 99and LEFTARROW commands. 100.IP "r or ^R or ^L" 101Repaint the screen. 102.IP R 103Repaint the screen, discarding any buffered input. 104Useful if the file is changing while it is being viewed. 105.IP "F" 106Scroll forward, and keep trying to read when the 107end of file is reached. 108Normally this command would be used when already at the end of the file. 109It is a way to monitor the tail of a file which is growing 110while it is being viewed. 111(The behavior is similar to the "tail \-f" command.) 112.IP "g or < or ESC-<" 113Go to line N in the file, default 1 (beginning of file). 114(Warning: this may be slow if N is large.) 115.IP "G or > or ESC->" 116Go to line N in the file, default the end of the file. 117(Warning: this may be slow if N is large, 118or if N is not specified and 119standard input, rather than a file, is being read.) 120.IP "p or %" 121Go to a position N percent into the file. 122N should be between 0 and 100, and may contain a decimal point. 123.IP "P" 124Go to the line containing byte offset N in the file. 125.IP "{" 126If a left curly bracket appears in the top line displayed 127on the screen, 128the { command will go to the matching right curly bracket. 129The matching right curly bracket is positioned on the bottom 130line of the screen. 131If there is more than one left curly bracket on the top line, 132a number N may be used to specify the N-th bracket on the line. 133.IP "}" 134If a right curly bracket appears in the bottom line displayed 135on the screen, 136the } command will go to the matching left curly bracket. 137The matching left curly bracket is positioned on the top 138line of the screen. 139If there is more than one right curly bracket on the top line, 140a number N may be used to specify the N-th bracket on the line. 141.IP "(" 142Like {, but applies to parentheses rather than curly brackets. 143.IP ")" 144Like }, but applies to parentheses rather than curly brackets. 145.IP "[" 146Like {, but applies to square brackets rather than curly brackets. 147.IP "]" 148Like }, but applies to square brackets rather than curly brackets. 149.IP "ESC-^F" 150Followed by two characters, 151acts like {, but uses the two characters as open and close brackets, 152respectively. 153For example, "ESC ^F < >" could be used to 154go forward to the > which matches the < in the top displayed line. 155.IP "ESC-^B" 156Followed by two characters, 157acts like }, but uses the two characters as open and close brackets, 158respectively. 159For example, "ESC ^B < >" could be used to 160go backward to the < which matches the > in the bottom displayed line. 161.IP m 162Followed by any lowercase letter, 163marks the current position with that letter. 164.IP "'" 165(Single quote.) 166Followed by any lowercase letter, returns to the position which 167was previously marked with that letter. 168Followed by another single quote, returns to the position at 169which the last "large" movement command was executed. 170Followed by a ^ or $, jumps to the beginning or end of the 171file respectively. 172Marks are preserved when a new file is examined, 173so the ' command can be used to switch between input files. 174.IP "^X^X" 175Same as single quote. 176.IP /pattern 177Search forward in the file for the N-th line containing the pattern. 178N defaults to 1. 179The pattern is a regular expression, as recognized by 180the regular expression library supplied by your system. 181The search starts at the second line displayed 182(but see the \-a and \-j options, which change this). 183.sp 184Certain characters are special 185if entered at the beginning of the pattern; 186they modify the type of search rather than become part of the pattern: 187.RS 188.IP "^N or !" 189Search for lines which do NOT match the pattern. 190.IP "^E or *" 191Search multiple files. 192That is, if the search reaches the END of the current file 193without finding a match, 194the search continues in the next file in the command line list. 195.IP "^F or @" 196Begin the search at the first line of the FIRST file 197in the command line list, 198regardless of what is currently displayed on the screen 199or the settings of the \-a or \-j options. 200.IP "^K" 201Highlight any text which matches the pattern on the current screen, 202but don't move to the first match (KEEP current position). 203.IP "^R" 204Don't interpret regular expression metacharacters; 205that is, do a simple textual comparison. 206.RE 207.IP ?pattern 208Search backward in the file for the N-th line containing the pattern. 209The search starts at the line immediately before the top line displayed. 210.sp 211Certain characters are special as in the / command: 212.RS 213.IP "^N or !" 214Search for lines which do NOT match the pattern. 215.IP "^E or *" 216Search multiple files. 217That is, if the search reaches the beginning of the current file 218without finding a match, 219the search continues in the previous file in the command line list. 220.IP "^F or @" 221Begin the search at the last line of the last file 222in the command line list, 223regardless of what is currently displayed on the screen 224or the settings of the \-a or \-j options. 225.IP "^K" 226As in forward searches. 227.IP "^R" 228As in forward searches. 229.RE 230.IP "ESC-/pattern" 231Same as "/*". 232.IP "ESC-?pattern" 233Same as "?*". 234.IP n 235Repeat previous search, for N-th line containing the last pattern. 236If the previous search was modified by ^N, the search is made for the 237N-th line NOT containing the pattern. 238If the previous search was modified by ^E, the search continues 239in the next (or previous) file if not satisfied in the current file. 240If the previous search was modified by ^R, the search is done 241without using regular expressions. 242There is no effect if the previous search was modified by ^F or ^K. 243.IP N 244Repeat previous search, but in the reverse direction. 245.IP "ESC-n" 246Repeat previous search, but crossing file boundaries. 247The effect is as if the previous search were modified by *. 248.IP "ESC-N" 249Repeat previous search, but in the reverse direction 250and crossing file boundaries. 251.IP "ESC-u" 252Undo search highlighting. 253Turn off highlighting of strings matching the current search pattern. 254If highlighting is already off because of a previous ESC-u command, 255turn highlighting back on. 256Any search command will also turn highlighting back on. 257(Highlighting can also be disabled by toggling the \-G option; 258in that case search commands do not turn highlighting back on.) 259.IP ":e [filename]" 260Examine a new file. 261If the filename is missing, the "current" file (see the :n and :p commands 262below) from the list of files in the command line is re-examined. 263A percent sign (%) in the filename is replaced by the name of the 264current file. 265A pound sign (#) is replaced by the name of the previously examined file. 266However, two consecutive percent signs are simply 267replaced with a single percent sign. 268This allows you to enter a filename that contains a percent sign 269in the name. 270Similarly, two consecutive pound signs are replaced with a single pound sign. 271The filename is inserted into the command line list of files 272so that it can be seen by subsequent :n and :p commands. 273If the filename consists of several files, they are all inserted into 274the list of files and the first one is examined. 275If the filename contains one or more spaces, 276the entire filename should be enclosed in double quotes 277(also see the \-" option). 278.IP "^X^V or E" 279Same as :e. 280Warning: some systems use ^V as a special literalization character. 281On such systems, you may not be able to use ^V. 282.IP ":n" 283Examine the next file (from the list of files given in the command line). 284If a number N is specified, the N-th next file is examined. 285.IP ":p" 286Examine the previous file in the command line list. 287If a number N is specified, the N-th previous file is examined. 288.IP ":x" 289Examine the first file in the command line list. 290If a number N is specified, the N-th file in the list is examined. 291.IP ":d" 292Remove the current file from the list of files. 293.IP "t" 294Go to the next tag, if there were more than one matches for the current tag. 295See the \-t option for more details about tags. 296.IP "T" 297Go to the previous tag, if there were more than one matches for the current tag. 298.IP "= or ^G or :f" 299Prints some information about the file being viewed, 300including its name 301and the line number and byte offset of the bottom line being displayed. 302If possible, it also prints the length of the file, 303the number of lines in the file 304and the percent of the file above the last displayed line. 305.IP \- 306Followed by one of the command line option letters (see OPTIONS below), 307this will change the setting of that option 308and print a message describing the new setting. 309If a ^P (CONTROL-P) is entered immediately after the dash, 310the setting of the option is changed but no message is printed. 311If the option letter has a numeric value (such as \-b or \-h), 312or a string value (such as \-P or \-t), 313a new value may be entered after the option letter. 314If no new value is entered, a message describing 315the current setting is printed and nothing is changed. 316.IP \-\- 317Like the \- command, but takes a long option name (see OPTIONS below) 318rather than a single option letter. 319You must press RETURN after typing the option name. 320A ^P immediately after the second dash suppresses printing of a 321message describing the new setting, as in the \- command. 322.IP \-+ 323Followed by one of the command line option letters 324this will reset the option to its default setting 325and print a message describing the new setting. 326(The "\-+\fIX\fP" command does the same thing 327as "\-+\fIX\fP" on the command line.) 328This does not work for string-valued options. 329.IP \-\-+ 330Like the \-+ command, but takes a long option name 331rather than a single option letter. 332.IP \-! 333Followed by one of the command line option letters, 334this will reset the option to the "opposite" of its default setting 335and print a message describing the new setting. 336This does not work for numeric or string-valued options. 337.IP \-\-! 338Like the \-! command, but takes a long option name 339rather than a single option letter. 340.IP _ 341(Underscore.) 342Followed by one of the command line option letters, 343this will print a message describing the current setting of that option. 344The setting of the option is not changed. 345.IP __ 346(Double underscore.) 347Like the _ (underscore) command, but takes a long option name 348rather than a single option letter. 349You must press RETURN after typing the option name. 350.IP +cmd 351Causes the specified cmd to be executed each time a new file is examined. 352For example, +G causes 353.I less 354to initially display each file starting at the end 355rather than the beginning. 356.IP V 357Prints the version number of 358.I less 359being run. 360.IP "q or Q or :q or :Q or ZZ" 361Exits 362.I less. 363.PP 364The following 365four 366commands may or may not be valid, depending on your particular installation. 367.PP 368.IP v 369Invokes an editor to edit the current file being viewed. 370The editor is taken from the environment variable VISUAL if defined, 371or EDITOR if VISUAL is not defined, 372or defaults to "vi" if neither VISUAL nor EDITOR is defined. 373See also the discussion of LESSEDIT under the section on PROMPTS below. 374.IP "! shell-command" 375Invokes a shell to run the shell-command given. 376A percent sign (%) in the command is replaced by the name of the 377current file. 378A pound sign (#) is replaced by the name of the previously examined file. 379"!!" repeats the last shell command. 380"!" with no shell command simply invokes a shell. 381On Unix systems, the shell is taken from the environment variable SHELL, 382or defaults to "sh". 383On MS-DOS and OS/2 systems, the shell is the normal command processor. 384.IP "| <m> shell-command" 385<m> represents any mark letter. 386Pipes a section of the input file to the given shell command. 387The section of the file to be piped is between the first line on 388the current screen and the position marked by the letter. 389<m> may also be ^ or $ to indicate beginning or end of file respectively. 390If <m> is . or newline, the current screen is piped. 391.IP "s filename" 392Save the input to a file. 393This only works if the input is a pipe, not an ordinary file. 394.PP 395.SH OPTIONS 396Command line options are described below. 397Most options may be changed while 398.I less 399is running, via the "\-" command. 400.PP 401Most options may be given in one of two forms: 402either a dash followed by a single letter, 403or two dashes followed by a long option name. 404A long option name may be abbreviated as long as 405the abbreviation is unambiguous. 406For example, \-\-quit-at-eof may be abbreviated \-\-quit, but not 407--qui, since both \-\-quit-at-eof and \-\-quiet begin with \-\-qui. 408Some long option names are in uppercase, such as \-\-QUIT-AT-EOF, as 409distinct from \-\-quit-at-eof. 410Such option names need only have their first letter capitalized; 411the remainder of the name may be in either case. 412For example, \-\-Quit-at-eof is equivalent to \-\-QUIT-AT-EOF. 413.PP 414Options are also taken from the environment variable "LESS". 415For example, 416to avoid typing "less \-options ..." each time 417.I less 418is invoked, you might tell 419.I csh: 420.sp 421setenv LESS "-options" 422.sp 423or if you use 424.I sh: 425.sp 426LESS="-options"; export LESS 427.sp 428On MS-DOS, you don't need the quotes, but you should replace any 429percent signs in the options string by double percent signs. 430.sp 431The environment variable is parsed before the command line, 432so command line options override the LESS environment variable. 433If an option appears in the LESS variable, it can be reset 434to its default value on the command line by beginning the command 435line option with "\-+". 436.sp 437For options like \-P or \-D which take a following string, 438a dollar sign ($) must be used to signal the end of the string. 439For example, to set two \-D options on MS-DOS, you must have 440a dollar sign between them, like this: 441.sp 442LESS="-Dn9.1$-Ds4.1" 443.sp 444.IP "\-? or \-\-help" 445This option displays a summary of the commands accepted by 446.I less 447(the same as the h command). 448(Depending on how your shell interprets the question mark, 449it may be necessary to quote the question mark, thus: "\-\e?".) 450.IP "\-a or \-\-search-skip-screen" 451Causes searches to start after the last line 452displayed on the screen, 453thus skipping all lines displayed on the screen. 454By default, searches start at the second line on the screen 455(or after the last found line; see the \-j option). 456.IP "\-b\fIn\fP or \-\-buffers=\fIn\fP" 457Specifies the amount of buffer space 458.I less 459will use for each file, in units of kilobytes (1024 bytes). 460By default 64K of buffer space is used for each file 461(unless the file is a pipe; see the \-B option). 462The \-b option specifies instead that \fIn\fP kilobytes of 463buffer space should be used for each file. 464If \fIn\fP is \-1, buffer space is unlimited; that is, 465the entire file is read into memory. 466.IP "\-B or \-\-auto-buffers" 467By default, when data is read from a pipe, 468buffers are allocated automatically as needed. 469If a large amount of data is read from the pipe, this can cause 470a large amount of memory to be allocated. 471The \-B option disables this automatic allocation of buffers for pipes, 472so that only 64K 473(or the amount of space specified by the \-b option) 474is used for the pipe. 475Warning: use of \-B can result in erroneous display, since only the 476most recently viewed part of the file is kept in memory; 477any earlier data is lost. 478.IP "\-c or \-\-clear-screen" 479Causes full screen repaints to be painted from the top line down. 480By default, 481full screen repaints are done by scrolling from the bottom of the screen. 482.IP "\-C or \-\-CLEAR-SCREEN" 483Same as \-c, for compatibility with older versions of 484.I less. 485.IP "\-d or \-\-dumb" 486The \-d option suppresses the error message 487normally displayed if the terminal is dumb; 488that is, lacks some important capability, 489such as the ability to clear the screen or scroll backward. 490The \-d option does not otherwise change the behavior of 491.I less 492on a dumb terminal. 493.IP "\-D\fBx\fP\fIcolor\fP or \-\-color=\fBx\fP\fIcolor\fP" 494[MS-DOS only] 495Sets the color of the text displayed. 496\fBx\fP is a single character which selects the type of text whose color is 497being set: n=normal, s=standout, d=bold, u=underlined, k=blink. 498\fIcolor\fP is a pair of numbers separated by a period. 499The first number selects the foreground color and the second selects 500the background color of the text. 501A single number \fIN\fP is the same as \fIN.0\fP. 502.IP "\-e or \-\-quit-at-eof" 503Causes 504.I less 505to automatically exit 506the second time it reaches end-of-file. 507By default, the only way to exit 508.I less 509is via the "q" command. 510.IP "\-E or \-\-QUIT-AT-EOF" 511Causes 512.I less 513to automatically exit the first time it reaches end-of-file. 514.IP "\-f or \-\-force" 515Forces non-regular files to be opened. 516(A non-regular file is a directory or a device special file.) 517Also suppresses the warning message when a binary file is opened. 518By default, 519.I less 520will refuse to open non-regular files. 521Note that some operating systems will not allow directories 522to be read, even if \-f is set. 523.IP "\-F or \-\-quit-if-one-screen" 524Causes 525.I less 526to automatically exit 527if the entire file can be displayed on the first screen. 528.IP "\-g or \-\-hilite-search" 529Normally, 530.I less 531will highlight ALL strings which match the last search command. 532The \-g option changes this behavior to highlight only the particular string 533which was found by the last search command. 534This can cause 535.I less 536to run somewhat faster than the default. 537.IP "\-G or \-\-HILITE-SEARCH" 538The \-G option suppresses all highlighting of strings found by search commands. 539.IP "\-h\fIn\fP or \-\-max-back-scroll=\fIn\fP" 540Specifies a maximum number of lines to scroll backward. 541If it is necessary to scroll backward more than \fIn\fP lines, 542the screen is repainted in a forward direction instead. 543(If the terminal does not have the ability to scroll 544backward, \-h0 is implied.) 545.IP "\-i or \-\-ignore-case" 546Causes searches to ignore case; that is, 547uppercase and lowercase are considered identical. 548This option is ignored if any uppercase letters 549appear in the search pattern; 550in other words, 551if a pattern contains uppercase letters, then that search does not ignore case. 552.IP "\-I or \-\-IGNORE-CASE" 553Like \-i, but searches ignore case even if 554the pattern contains uppercase letters. 555.IP "\-j\fIn\fP or \-\-jump-target=\fIn\fP" 556Specifies a line on the screen where the "target" line 557is to be positioned. 558A target line is the object of a text search, 559tag search, jump to a line number, 560jump to a file percentage, or jump to a marked position. 561The screen line may be specified by a number: the top line on the screen 562is 1, the next is 2, and so on. 563The number may be negative to specify a line relative to the bottom 564of the screen: the bottom line on the screen is \-1, the second 565to the bottom is \-2, and so on. 566Alternately, the screen line may be specified as a fraction of the height 567of the screen, starting with a decimal point: .5 is in the middle of the 568screen, .3 is three tenths down from the first line, and so on. 569If the line is specified as a fraction, the actual line number 570is recalculated if the terminal window is resized, so that the 571target line remains at the specified fraction of the screen height. 572If the \-j option is used, searches begin at the line immediately 573after the target line. 574For example, if "\-j4" is used, the target line is the 575fourth line on the screen, so searches begin at the fifth line 576on the screen. 577.IP "\-J or \-\-status-column" 578Displays a status column at the left edge of the screen. 579The status column shows the lines that matched the current search. 580The status column is also used if the \-w or \-W option is in effect. 581.IP "\-k\fIfilename\fP or \-\-lesskey-file=\fIfilename\fP" 582Causes 583.I less 584to open and interpret the named file as a 585.I lesskey 586(1) file. 587Multiple \-k options may be specified. 588If the LESSKEY or LESSKEY_SYSTEM environment variable is set, or 589if a lesskey file is found in a standard place (see KEY BINDINGS), 590it is also used as a 591.I lesskey 592file. 593.IP "\-K or \-\-quit-on-intr" 594Causes 595.I less 596to exit immediately when an interrupt character (usually ^C) is typed. 597Normally, an interrupt character causes 598.I less 599to stop whatever it is doing and return to its command prompt. 600.IP "\-L or \-\-no-lessopen" 601Ignore the LESSOPEN environment variable 602(see the INPUT PREPROCESSOR section below). 603This option can be set from within \fIless\fP, 604but it will apply only to files opened subsequently, not to the 605file which is currently open. 606.IP "\-m or \-\-long-prompt" 607Causes 608.I less 609to prompt verbosely (like \fImore\fP), 610with the percent into the file. 611By default, 612.I less 613prompts with a colon. 614.IP "\-M or \-\-LONG-PROMPT" 615Causes 616.I less 617to prompt even more verbosely than 618.I more. 619.IP "\-n or \-\-line-numbers" 620Suppresses line numbers. 621The default (to use line numbers) may cause 622.I less 623to run more slowly in some cases, especially with a very large input file. 624Suppressing line numbers with the \-n option will avoid this problem. 625Using line numbers means: the line number will be displayed in the verbose 626prompt and in the = command, 627and the v command will pass the current line number to the editor 628(see also the discussion of LESSEDIT in PROMPTS below). 629.IP "\-N or \-\-LINE-NUMBERS" 630Causes a line number to be displayed at the beginning of 631each line in the display. 632.IP "\-o\fIfilename\fP or \-\-log-file=\fIfilename\fP" 633Causes 634.I less 635to copy its input to the named file as it is being viewed. 636This applies only when the input file is a pipe, 637not an ordinary file. 638If the file already exists, 639.I less 640will ask for confirmation before overwriting it. 641.IP "\-O\fIfilename\fP or \-\-LOG-FILE=\fIfilename\fP" 642The \-O option is like \-o, but it will overwrite an existing 643file without asking for confirmation. 644.sp 645If no log file has been specified, 646the \-o and \-O options can be used from within 647.I less 648to specify a log file. 649Without a file name, they will simply report the name of the log file. 650The "s" command is equivalent to specifying \-o from within 651.I less. 652.IP "\-p\fIpattern\fP or \-\-pattern=\fIpattern\fP" 653The \-p option on the command line is equivalent to 654specifying +/\fIpattern\fP; 655that is, it tells 656.I less 657to start at the first occurrence of \fIpattern\fP in the file. 658.IP "\-P\fIprompt\fP or \-\-prompt=\fIprompt\fP" 659Provides a way to tailor the three prompt 660styles to your own preference. 661This option would normally be put in the LESS environment 662variable, rather than being typed in with each 663.I less 664command. 665Such an option must either be the last option in the LESS variable, 666or be terminated by a dollar sign. 667-Ps followed by a string changes the default (short) prompt 668to that string. 669-Pm changes the medium (\-m) prompt. 670-PM changes the long (\-M) prompt. 671-Ph changes the prompt for the help screen. 672-P= changes the message printed by the = command. 673-Pw changes the message printed while waiting for data (in the F command). 674All prompt strings consist of a sequence of 675letters and special escape sequences. 676See the section on PROMPTS for more details. 677.IP "\-q or \-\-quiet or \-\-silent" 678Causes moderately "quiet" operation: 679the terminal bell is not rung 680if an attempt is made to scroll past the end of the file 681or before the beginning of the file. 682If the terminal has a "visual bell", it is used instead. 683The bell will be rung on certain other errors, 684such as typing an invalid character. 685The default is to ring the terminal bell in all such cases. 686.IP "\-Q or \-\-QUIET or \-\-SILENT" 687Causes totally "quiet" operation: 688the terminal bell is never rung. 689.IP "\-r or \-\-raw-control-chars" 690Causes "raw" control characters to be displayed. 691The default is to display control characters using the caret notation; 692for example, a control-A (octal 001) is displayed as "^A". 693Warning: when the \-r option is used, 694.I less 695cannot keep track of the actual appearance of the screen 696(since this depends on how the screen responds to 697each type of control character). 698Thus, various display problems may result, 699such as long lines being split in the wrong place. 700.IP "\-R or \-\-RAW-CONTROL-CHARS" 701Like \-r, but only ANSI "color" escape sequences are output in "raw" form. 702Unlike \-r, the screen appearance is maintained correctly in most cases. 703ANSI "color" escape sequences are sequences of the form: 704.sp 705 ESC [ ... m 706.sp 707where the "..." is zero or more color specification characters 708For the purpose of keeping track of screen appearance, 709ANSI color escape sequences are assumed to not move the cursor. 710You can make 711.I less 712think that characters other than "m" can end ANSI color escape sequences 713by setting the environment variable LESSANSIENDCHARS to the list of 714characters which can end a color escape sequence. 715And you can make 716.I less 717think that characters other than the standard ones may appear between 718the ESC and the m by setting the environment variable LESSANSIMIDCHARS 719to the list of characters which can appear. 720.IP "\-s or \-\-squeeze-blank-lines" 721Causes consecutive blank lines to be squeezed into a single blank line. 722This is useful when viewing 723.I nroff 724output. 725.IP "\-S or \-\-chop-long-lines" 726Causes lines longer than the screen width to be 727chopped rather than folded. 728That is, the portion of a long line that does not fit in 729the screen width is not shown. 730The default is to fold long lines; that is, display the remainder 731on the next line. 732.IP "\-t\fItag\fP or \-\-tag=\fItag\fP" 733The \-t option, followed immediately by a TAG, 734will edit the file containing that tag. 735For this to work, tag information must be available; 736for example, there may be a file in the current directory called "tags", 737which was previously built by 738.I ctags 739(1) or an equivalent command. 740If the environment variable LESSGLOBALTAGS is set, it is taken to be 741the name of a command compatible with 742.I global 743(1), and that command is executed to find the tag. 744(See http://www.gnu.org/software/global/global.html). 745The \-t option may also be specified from within 746.I less 747(using the \- command) as a way of examining a new file. 748The command ":t" is equivalent to specifying \-t from within 749.I less. 750.IP "\-T\fItagsfile\fP or \-\-tag-file=\fItagsfile\fP" 751Specifies a tags file to be used instead of "tags". 752.IP "\-u or \-\-underline-special" 753Causes backspaces and carriage returns to be treated as printable characters; 754that is, they are sent to the terminal when they appear in the input. 755.IP "\-U or \-\-UNDERLINE-SPECIAL" 756Causes backspaces, tabs and carriage returns to be 757treated as control characters; 758that is, they are handled as specified by the \-r option. 759.sp 760By default, if neither \-u nor \-U is given, 761backspaces which appear adjacent to an underscore character 762are treated specially: 763the underlined text is displayed 764using the terminal's hardware underlining capability. 765Also, backspaces which appear between two identical characters 766are treated specially: 767the overstruck text is printed 768using the terminal's hardware boldface capability. 769Other backspaces are deleted, along with the preceding character. 770Carriage returns immediately followed by a newline are deleted. 771other carriage returns are handled as specified by the \-r option. 772Text which is overstruck or underlined can be searched for 773if neither \-u nor \-U is in effect. 774.IP "\-V or \-\-version" 775Displays the version number of 776.I less. 777.IP "\-w or \-\-hilite-unread" 778Temporarily highlights the first "new" line after a forward movement 779of a full page. 780The first "new" line is the line immediately following the line previously 781at the bottom of the screen. 782Also highlights the target line after a g or p command. 783The highlight is removed at the next command which causes movement. 784The entire line is highlighted, unless the \-J option is in effect, 785in which case only the status column is highlighted. 786.IP "\-W or \-\-HILITE-UNREAD" 787Like \-w, but temporarily highlights the first new line after any 788forward movement command larger than one line. 789.IP "\-x\fIn\fP,... or \-\-tabs=\fIn\fP,..." 790Sets tab stops. 791If only one \fIn\fP is specified, tab stops are set at multiples of \fIn\fP. 792If multiple values separated by commas are specified, tab stops 793are set at those positions, and then continue with the same spacing as the 794last two. 795For example, \fI-x9,17\fP will set tabs at positions 9, 17, 25, 33, etc. 796The default for \fIn\fP is 8. 797.IP "\-X or \-\-no-init" 798Disables sending the termcap initialization and deinitialization strings 799to the terminal. 800This is sometimes desirable if the deinitialization string does 801something unnecessary, like clearing the screen. 802.IP "\-\-no-keypad" 803Disables sending the keypad initialization and deinitialization strings 804to the terminal. 805This is sometimes useful if the keypad strings make the numeric 806keypad behave in an undesirable manner. 807.IP "\-y\fIn\fP or \-\-max-forw-scroll=\fIn\fP" 808Specifies a maximum number of lines to scroll forward. 809If it is necessary to scroll forward more than \fIn\fP lines, 810the screen is repainted instead. 811The \-c or \-C option may be used to repaint from the top of 812the screen if desired. 813By default, any forward movement causes scrolling. 814.IP "\-[z]\fIn\fP or \-\-window=\fIn\fP" 815Changes the default scrolling window size to \fIn\fP lines. 816The default is one screenful. 817The z and w commands can also be used to change the window size. 818The "z" may be omitted for compatibility with some versions of 819.I more. 820If the number 821.I n 822is negative, it indicates 823.I n 824lines less than the current screen size. 825For example, if the screen is 24 lines, \fI\-z-4\fP sets the 826scrolling window to 20 lines. If the screen is resized to 40 lines, 827the scrolling window automatically changes to 36 lines. 828.IP "\-\fI\(dqcc\fP\ or\ \-\-quotes=\fIcc\fP" 829Changes the filename quoting character. 830This may be necessary if you are trying to name a file 831which contains both spaces and quote characters. 832Followed by a single character, this changes the quote character to that 833character. 834Filenames containing a space should then be surrounded by that character 835rather than by double quotes. 836Followed by two characters, changes the open quote to the first character, 837and the close quote to the second character. 838Filenames containing a space should then be preceded by the open quote 839character and followed by the close quote character. 840Note that even after the quote characters are changed, this option 841remains \-" (a dash followed by a double quote). 842.IP "\-~ or \-\-tilde" 843Normally lines after end of file are displayed as a single tilde (~). 844This option causes lines after end of file to be displayed as blank lines. 845.IP "\-# or \-\-shift" 846Specifies the default number of positions to scroll horizontally 847in the RIGHTARROW and LEFTARROW commands. 848If the number specified is zero, it sets the default number of 849positions to one half of the screen width. 850.IP \-\- 851A command line argument of "\-\-" marks the end of option arguments. 852Any arguments following this are interpreted as filenames. 853This can be useful when viewing a file whose name begins with a "\-" or "+". 854.IP + 855If a command line option begins with \fB+\fP, 856the remainder of that option is taken to be an initial command to 857.I less. 858For example, +G tells 859.I less 860to start at the end of the file rather than the beginning, 861and +/xyz tells it to start at the first occurrence of "xyz" in the file. 862As a special case, +<number> acts like +<number>g; 863that is, it starts the display at the specified line number 864(however, see the caveat under the "g" command above). 865If the option starts with ++, the initial command applies to 866every file being viewed, not just the first one. 867The + command described previously 868may also be used to set (or change) an initial command for every file. 869 870.SH "LINE EDITING" 871When entering command line at the bottom of the screen 872(for example, a filename for the :e command, 873or the pattern for a search command), 874certain keys can be used to manipulate the command line. 875Most commands have an alternate form in [ brackets ] which can be used if 876a key does not exist on a particular keyboard. 877(The bracketed forms do not work in the MS-DOS version.) 878Any of these special keys may be entered literally by preceding 879it with the "literal" character, either ^V or ^A. 880A backslash itself may also be entered literally by entering two backslashes. 881.IP "LEFTARROW [ ESC-h ]" 882Move the cursor one space to the left. 883.IP "RIGHTARROW [ ESC-l ]" 884Move the cursor one space to the right. 885.IP "^LEFTARROW [ ESC-b or ESC-LEFTARROW ]" 886(That is, CONTROL and LEFTARROW simultaneously.) 887Move the cursor one word to the left. 888.IP "^RIGHTARROW [ ESC-w or ESC-RIGHTARROW ]" 889(That is, CONTROL and RIGHTARROW simultaneously.) 890Move the cursor one word to the right. 891.IP "HOME [ ESC-0 ]" 892Move the cursor to the beginning of the line. 893.IP "END [ ESC-$ ]" 894Move the cursor to the end of the line. 895.IP "BACKSPACE" 896Delete the character to the left of the cursor, 897or cancel the command if the command line is empty. 898.IP "DELETE or [ ESC-x ]" 899Delete the character under the cursor. 900.IP "^BACKSPACE [ ESC-BACKSPACE ]" 901(That is, CONTROL and BACKSPACE simultaneously.) 902Delete the word to the left of the cursor. 903.IP "^DELETE [ ESC-X or ESC-DELETE ]" 904(That is, CONTROL and DELETE simultaneously.) 905Delete the word under the cursor. 906.IP "UPARROW [ ESC-k ]" 907Retrieve the previous command line. 908.IP "DOWNARROW [ ESC-j ]" 909Retrieve the next command line. 910.IP "TAB" 911Complete the partial filename to the left of the cursor. 912If it matches more than one filename, the first match 913is entered into the command line. 914Repeated TABs will cycle thru the other matching filenames. 915If the completed filename is a directory, a "/" is appended to the filename. 916(On MS-DOS systems, a "\e" is appended.) 917The environment variable LESSSEPARATOR can be used to specify a 918different character to append to a directory name. 919.IP "BACKTAB [ ESC-TAB ]" 920Like, TAB, but cycles in the reverse direction thru the matching filenames. 921.IP "^L" 922Complete the partial filename to the left of the cursor. 923If it matches more than one filename, all matches are entered into 924the command line (if they fit). 925.IP "^U (Unix and OS/2) or ESC (MS-DOS)" 926Delete the entire command line, 927or cancel the command if the command line is empty. 928If you have changed your line-kill character in Unix to something 929other than ^U, that character is used instead of ^U. 930 931.SH "KEY BINDINGS" 932You may define your own 933.I less 934commands by using the program 935.I lesskey 936(1) 937to create a lesskey file. 938This file specifies a set of command keys and an action 939associated with each key. 940You may also use 941.I lesskey 942to change the line-editing keys (see LINE EDITING), 943and to set environment variables. 944If the environment variable LESSKEY is set, 945.I less 946uses that as the name of the lesskey file. 947Otherwise, 948.I less 949looks in a standard place for the lesskey file: 950On Unix systems, 951.I less 952looks for a lesskey file called "$HOME/.less". 953On MS-DOS and Windows systems, 954.I less 955looks for a lesskey file called "$HOME/_less", and if it is not found there, 956then looks for a lesskey file called "_less" in any directory specified 957in the PATH environment variable. 958On OS/2 systems, 959.I less 960looks for a lesskey file called "$HOME/less.ini", and if it is not found, 961then looks for a lesskey file called "less.ini" in any directory specified 962in the INIT environment variable, and if it not found there, 963then looks for a lesskey file called "less.ini" in any directory specified 964in the PATH environment variable. 965See the 966.I lesskey 967manual page for more details. 968.P 969A system-wide lesskey file may also be set up to provide key bindings. 970If a key is defined in both a local lesskey file and in the 971system-wide file, key bindings in the local file take precedence over 972those in the system-wide file. 973If the environment variable LESSKEY_SYSTEM is set, 974.I less 975uses that as the name of the system-wide lesskey file. 976Otherwise, 977.I less 978looks in a standard place for the system-wide lesskey file: 979On Unix systems, the system-wide lesskey file is /usr/local/etc/sysless. 980(However, if 981.I less 982was built with a different sysconf directory than /usr/local/etc, 983that directory is where the sysless file is found.) 984On MS-DOS and Windows systems, the system-wide lesskey file is c:\e_sysless. 985On OS/2 systems, the system-wide lesskey file is c:\esysless.ini. 986 987.SH "INPUT PREPROCESSOR" 988You may define an "input preprocessor" for 989.I less. 990Before 991.I less 992opens a file, it first gives your input preprocessor a chance to modify the 993way the contents of the file are displayed. 994An input preprocessor is simply an executable program (or shell script), 995which writes the contents of the file to a different file, 996called the replacement file. 997The contents of the replacement file are then displayed 998in place of the contents of the original file. 999However, it will appear to the user as if the original file is opened; 1000that is, 1001.I less 1002will display the original filename as the name of the current file. 1003.PP 1004An input preprocessor receives one command line argument, the original filename, 1005as entered by the user. 1006It should create the replacement file, and when finished, 1007print the name of the replacement file to its standard output. 1008If the input preprocessor does not output a replacement filename, 1009.I less 1010uses the original file, as normal. 1011The input preprocessor is not called when viewing standard input. 1012To set up an input preprocessor, set the LESSOPEN environment variable 1013to a command line which will invoke your input preprocessor. 1014This command line should include one occurrence of the string "%s", 1015which will be replaced by the filename 1016when the input preprocessor command is invoked. 1017.PP 1018When 1019.I less 1020closes a file opened in such a way, it will call another program, 1021called the input postprocessor, 1022which may perform any desired clean-up action (such as deleting the 1023replacement file created by LESSOPEN). 1024This program receives two command line arguments, the original filename 1025as entered by the user, and the name of the replacement file. 1026To set up an input postprocessor, set the LESSCLOSE environment variable 1027to a command line which will invoke your input postprocessor. 1028It may include two occurrences of the string "%s"; 1029the first is replaced with the original name of the file and 1030the second with the name of the replacement file, 1031which was output by LESSOPEN. 1032.PP 1033For example, on many Unix systems, these two scripts will allow you 1034to keep files in compressed format, but still let 1035.I less 1036view them directly: 1037.PP 1038lessopen.sh: 1039.br 1040 #! /bin/sh 1041.br 1042 case "$1" in 1043.br 1044 *.Z) uncompress -\c $1 >/tmp/less.$$ 2>/dev/null 1045.br 1046 if [ \-s /tmp/less.$$ ]; then 1047.br 1048 echo /tmp/less.$$ 1049.br 1050 else 1051.br 1052 rm \-f /tmp/less.$$ 1053.br 1054 fi 1055.br 1056 ;; 1057.br 1058 esac 1059.PP 1060lessclose.sh: 1061.br 1062 #! /bin/sh 1063.br 1064 rm $2 1065.PP 1066To use these scripts, put them both where they can be executed and 1067set LESSOPEN="lessopen.sh\ %s", and 1068LESSCLOSE="lessclose.sh\ %s\ %s". 1069More complex LESSOPEN and LESSCLOSE scripts may be written 1070to accept other types of compressed files, and so on. 1071.PP 1072It is also possible to set up an input preprocessor to 1073pipe the file data directly to 1074.I less, 1075rather than putting the data into a replacement file. 1076This avoids the need to decompress the entire file before 1077starting to view it. 1078An input preprocessor that works this way is called an input pipe. 1079An input pipe, instead of writing the name of a replacement file on 1080its standard output, 1081writes the entire contents of the replacement file on its standard output. 1082If the input pipe does not write any characters on its standard output, 1083then there is no replacement file and 1084.I less 1085uses the original file, as normal. 1086To use an input pipe, 1087make the first character in the LESSOPEN environment variable a 1088vertical bar (|) to signify that the input preprocessor is an input pipe. 1089.PP 1090For example, on many Unix systems, this script will work like the 1091previous example scripts: 1092.PP 1093lesspipe.sh: 1094.br 1095 #! /bin/sh 1096.br 1097 case "$1" in 1098.br 1099 *.Z) uncompress \-c $1 2>/dev/null 1100.br 1101 ;; 1102.br 1103 esac 1104.br 1105.PP 1106To use this script, put it where it can be executed and set 1107LESSOPEN="|lesspipe.sh %s". 1108When an input pipe is used, a LESSCLOSE postprocessor can be used, 1109but it is usually not necessary since there is no replacement file 1110to clean up. 1111In this case, the replacement file name passed to the LESSCLOSE 1112postprocessor is "\-". 1113 1114.SH "NATIONAL CHARACTER SETS" 1115There are three types of characters in the input file: 1116.IP "normal characters" 1117can be displayed directly to the screen. 1118.IP "control characters" 1119should not be displayed directly, but are expected to be found 1120in ordinary text files (such as backspace and tab). 1121.IP "binary characters" 1122should not be displayed directly and are not expected to be found 1123in text files. 1124.PP 1125A "character set" is simply a description of which characters are to 1126be considered normal, control, and binary. 1127The LESSCHARSET environment variable may be used to select a character set. 1128Possible values for LESSCHARSET are: 1129.IP ascii 1130BS, TAB, NL, CR, and formfeed are control characters, 1131all chars with values between 32 and 126 are normal, 1132and all others are binary. 1133.IP iso8859 1134Selects an ISO 8859 character set. 1135This is the same as ASCII, except characters between 160 and 255 are 1136treated as normal characters. 1137.IP latin1 1138Same as iso8859. 1139.IP latin9 1140Same as iso8859. 1141.IP dos 1142Selects a character set appropriate for MS-DOS. 1143.IP ebcdic 1144Selects an EBCDIC character set. 1145.IP IBM-1047 1146Selects an EBCDIC character set used by OS/390 Unix Services. 1147This is the EBCDIC analogue of latin1. You get similar results 1148by setting either LESSCHARSET=IBM-1047 or LC_CTYPE=en_US 1149in your environment. 1150.IP koi8-r 1151Selects a Russian character set. 1152.IP next 1153Selects a character set appropriate for NeXT computers. 1154.IP utf-8 1155Selects the UTF-8 encoding of the ISO 10646 character set. 1156UTF-8 is special in that it supports multi-byte characters in the input file. 1157It is the only character set that supports multi-byte characters. 1158.IP windows 1159Selects a character set appropriate for Microsoft Windows (cp 1251). 1160.PP 1161In special cases, it may be desired to tailor 1162.I less 1163to use a character set other than the ones definable by LESSCHARSET. 1164In this case, the environment variable LESSCHARDEF can be used 1165to define a character set. 1166It should be set to a string where each character in the string represents 1167one character in the character set. 1168The character "." is used for a normal character, "c" for control, 1169and "b" for binary. 1170A decimal number may be used for repetition. 1171For example, "bccc4b." would mean character 0 is binary, 11721, 2 and 3 are control, 4, 5, 6 and 7 are binary, and 8 is normal. 1173All characters after the last are taken to be the same as the last, 1174so characters 9 through 255 would be normal. 1175(This is an example, and does not necessarily 1176represent any real character set.) 1177.PP 1178This table shows the value of LESSCHARDEF which is equivalent 1179to each of the possible values for LESSCHARSET: 1180.sp 1181 ascii\ 8bcccbcc18b95.b 1182.br 1183 dos\ \ \ 8bcccbcc12bc5b95.b. 1184.br 1185 ebcdic 5bc6bcc7bcc41b.9b7.9b5.b..8b6.10b6.b9.7b 1186.br 1187 \ \ \ \ \ \ 9.8b8.17b3.3b9.7b9.8b8.6b10.b.b.b. 1188.br 1189 IBM-1047 4cbcbc3b9cbccbccbb4c6bcc5b3cbbc4bc4bccbc 1190.br 1191 \ \ \ \ \ \ 191.b 1192.br 1193 iso8859 8bcccbcc18b95.33b. 1194.br 1195 koi8-r 8bcccbcc18b95.b128. 1196.br 1197 latin1 8bcccbcc18b95.33b. 1198.br 1199 next\ \ 8bcccbcc18b95.bb125.bb 1200.PP 1201If neither LESSCHARSET nor LESSCHARDEF is set, 1202but any of the strings "UTF-8", "UTF8", "utf-8" or "utf8" 1203is found in the LC_ALL, LC_TYPE or LANG 1204environment variables, then the default character set is utf-8. 1205.PP 1206If that string is not found, but your system supports the 1207.I setlocale 1208interface, 1209.I less 1210will use setlocale to determine the character set. 1211setlocale is controlled by setting the LANG or LC_CTYPE environment 1212variables. 1213.PP 1214Finally, if the 1215.I setlocale 1216interface is also not available, the default character set is latin1. 1217.PP 1218Control and binary characters are displayed in standout (reverse video). 1219Each such character is displayed in caret notation if possible 1220(e.g. ^A for control-A). Caret notation is used only if 1221inverting the 0100 bit results in a normal printable character. 1222Otherwise, the character is displayed as a hex number in angle brackets. 1223This format can be changed by 1224setting the LESSBINFMT environment variable. 1225LESSBINFMT may begin with a "*" and one character to select 1226the display attribute: 1227"*k" is blinking, "*d" is bold, "*u" is underlined, "*s" is standout, 1228and "*n" is normal. 1229If LESSBINFMT does not begin with a "*", normal attribute is assumed. 1230The remainder of LESSBINFMT is a string which may include one 1231printf-style escape sequence (a % followed by x, X, o, d, etc.). 1232For example, if LESSBINFMT is "*u[%x]", binary characters 1233are displayed in underlined hexadecimal surrounded by brackets. 1234The default if no LESSBINFMT is specified is "*s<%X>". 1235The default if no LESSBINFMT is specified is "*s<%02X>". 1236Warning: the result of expanding the character via LESSBINFMT must 1237be less than 31 characters. 1238.PP 1239When the character set is utf-8, the LESSUTFBINFMT environment variable 1240acts similarly to LESSBINFMT but it applies to Unicode code points 1241that were successfully decoded but are unsuitable for display (e.g., 1242unassigned code points). 1243Its default value is "<U+%04lX>". 1244Note that LESSUTFBINFMT and LESSBINFMT share their display attribute 1245setting ("*x") so specifying one will affect both; 1246LESSUTFBINFMT is read after LESSBINFMT so its setting, if any, 1247will have priority. 1248Problematic octets in a UTF-8 file (octets of a truncated sequence, 1249octets of a complete but non-shortest form sequence, illegal octets, 1250and stray trailing octets) 1251are displayed individually using LESSBINFMT so as to facilitate diagnostic 1252of how the UTF-8 file is ill-formed. 1253 1254.SH "PROMPTS" 1255The \-P option allows you to tailor the prompt to your preference. 1256The string given to the \-P option replaces the specified prompt string. 1257Certain characters in the string are interpreted specially. 1258The prompt mechanism is rather complicated to provide flexibility, 1259but the ordinary user need not understand the details of constructing 1260personalized prompt strings. 1261.sp 1262A percent sign followed by a single character is expanded 1263according to what the following character is: 1264.IP "%b\fIX\fP" 1265Replaced by the byte offset into the current input file. 1266The b is followed by a single character (shown as \fIX\fP above) 1267which specifies the line whose byte offset is to be used. 1268If the character is a "t", the byte offset of the top line in the 1269display is used, 1270an "m" means use the middle line, 1271a "b" means use the bottom line, 1272a "B" means use the line just after the bottom line, 1273and a "j" means use the "target" line, as specified by the \-j option. 1274.IP "%B" 1275Replaced by the size of the current input file. 1276.IP "%c" 1277Replaced by the column number of the text appearing in the first 1278column of the screen. 1279.IP "%d\fIX\fP" 1280Replaced by the page number of a line in the input file. 1281The line to be used is determined by the \fIX\fP, as with the %b option. 1282.IP "%D" 1283Replaced by the number of pages in the input file, 1284or equivalently, the page number of the last line in the input file. 1285.IP "%E" 1286Replaced by the name of the editor (from the VISUAL environment variable, 1287or the EDITOR environment variable if VISUAL is not defined). 1288See the discussion of the LESSEDIT feature below. 1289.IP "%f" 1290Replaced by the name of the current input file. 1291.IP "%i" 1292Replaced by the index of the current file in the list of 1293input files. 1294.IP "%l\fIX\fP" 1295Replaced by the line number of a line in the input file. 1296The line to be used is determined by the \fIX\fP, as with the %b option. 1297.IP "%L" 1298Replaced by the line number of the last line in the input file. 1299.IP "%m" 1300Replaced by the total number of input files. 1301.IP "%p\fIX\fP" 1302Replaced by the percent into the current input file, based on byte offsets. 1303The line used is determined by the \fIX\fP as with the %b option. 1304.IP "%P\fIX\fP" 1305Replaced by the percent into the current input file, based on line numbers. 1306The line used is determined by the \fIX\fP as with the %b option. 1307.IP "%s" 1308Same as %B. 1309.IP "%t" 1310Causes any trailing spaces to be removed. 1311Usually used at the end of the string, but may appear anywhere. 1312.IP "%x" 1313Replaced by the name of the next input file in the list. 1314.PP 1315If any item is unknown (for example, the file size if input 1316is a pipe), a question mark is printed instead. 1317.PP 1318The format of the prompt string can be changed 1319depending on certain conditions. 1320A question mark followed by a single character acts like an "IF": 1321depending on the following character, a condition is evaluated. 1322If the condition is true, any characters following the question mark 1323and condition character, up to a period, are included in the prompt. 1324If the condition is false, such characters are not included. 1325A colon appearing between the question mark and the 1326period can be used to establish an "ELSE": any characters between 1327the colon and the period are included in the string if and only if 1328the IF condition is false. 1329Condition characters (which follow a question mark) may be: 1330.IP "?a" 1331True if any characters have been included in the prompt so far. 1332.IP "?b\fIX\fP" 1333True if the byte offset of the specified line is known. 1334.IP "?B" 1335True if the size of current input file is known. 1336.IP "?c" 1337True if the text is horizontally shifted (%c is not zero). 1338.IP "?d\fIX\fP" 1339True if the page number of the specified line is known. 1340.IP "?e" 1341True if at end-of-file. 1342.IP "?f" 1343True if there is an input filename 1344(that is, if input is not a pipe). 1345.IP "?l\fIX\fP" 1346True if the line number of the specified line is known. 1347.IP "?L" 1348True if the line number of the last line in the file is known. 1349.IP "?m" 1350True if there is more than one input file. 1351.IP "?n" 1352True if this is the first prompt in a new input file. 1353.IP "?p\fIX\fP" 1354True if the percent into the current input file, based on byte offsets, 1355of the specified line is known. 1356.IP "?P\fIX\fP" 1357True if the percent into the current input file, based on line numbers, 1358of the specified line is known. 1359.IP "?s" 1360Same as "?B". 1361.IP "?x" 1362True if there is a next input file 1363(that is, if the current input file is not the last one). 1364.PP 1365Any characters other than the special ones 1366(question mark, colon, period, percent, and backslash) 1367become literally part of the prompt. 1368Any of the special characters may be included in the prompt literally 1369by preceding it with a backslash. 1370.PP 1371Some examples: 1372.sp 1373?f%f:Standard input. 1374.sp 1375This prompt prints the filename, if known; 1376otherwise the string "Standard input". 1377.sp 1378?f%f .?ltLine %lt:?pt%pt\e%:?btByte %bt:-... 1379.sp 1380This prompt would print the filename, if known. 1381The filename is followed by the line number, if known, 1382otherwise the percent if known, otherwise the byte offset if known. 1383Otherwise, a dash is printed. 1384Notice how each question mark has a matching period, 1385and how the % after the %pt 1386is included literally by escaping it with a backslash. 1387.sp 1388?n?f%f\ .?m(file\ %i\ of\ %m)\ ..?e(END)\ ?x-\ Next\e:\ %x..%t 1389.sp 1390This prints the filename if this is the first prompt in a file, 1391followed by the "file N of N" message if there is more 1392than one input file. 1393Then, if we are at end-of-file, the string "(END)" is printed 1394followed by the name of the next file, if there is one. 1395Finally, any trailing spaces are truncated. 1396This is the default prompt. 1397For reference, here are the defaults for 1398the other two prompts (\-m and \-M respectively). 1399Each is broken into two lines here for readability only. 1400.nf 1401.sp 1402?n?f%f\ .?m(file\ %i\ of\ %m)\ ..?e(END)\ ?x-\ Next\e:\ %x.: 1403 ?pB%pB\e%:byte\ %bB?s/%s...%t 1404.sp 1405?f%f\ .?n?m(file\ %i\ of\ %m)\ ..?ltlines\ %lt-%lb?L/%L.\ : 1406 byte\ %bB?s/%s.\ .?e(END)\ ?x-\ Next\e:\ %x.:?pB%pB\e%..%t 1407.sp 1408.fi 1409And here is the default message produced by the = command: 1410.nf 1411.sp 1412?f%f\ .?m(file\ %i\ of\ %m)\ .?ltlines\ %lt-%lb?L/%L.\ . 1413 byte\ %bB?s/%s.\ ?e(END)\ :?pB%pB\e%..%t 1414.fi 1415.PP 1416The prompt expansion features are also used for another purpose: 1417if an environment variable LESSEDIT is defined, it is used 1418as the command to be executed when the v command is invoked. 1419The LESSEDIT string is expanded in the same way as the prompt strings. 1420The default value for LESSEDIT is: 1421.nf 1422.sp 1423 %E\ ?lm+%lm.\ %f 1424.sp 1425.fi 1426Note that this expands to the editor name, followed by a + and the 1427line number, followed by the file name. 1428If your editor does not accept the "+linenumber" syntax, or has other 1429differences in invocation syntax, the LESSEDIT variable can be 1430changed to modify this default. 1431 1432.SH SECURITY 1433When the environment variable LESSSECURE is set to 1, 1434.I less 1435runs in a "secure" mode. 1436This means these features are disabled: 1437.RS 1438.IP "!" 1439the shell command 1440.IP "|" 1441the pipe command 1442.IP ":e" 1443the examine command. 1444.IP "v" 1445the editing command 1446.IP "s \-o" 1447log files 1448.IP "\-k" 1449use of lesskey files 1450.IP "\-t" 1451use of tags files 1452.IP " " 1453metacharacters in filenames, such as * 1454.IP " " 1455filename completion (TAB, ^L) 1456.RE 1457.PP 1458Less can also be compiled to be permanently in "secure" mode. 1459 1460.SH "COMPATIBILITY WITH MORE" 1461If the environment variable LESS_IS_MORE is set to 1, 1462or if the program is invoked via a file link named "more", 1463.I less 1464behaves (mostly) in conformance with the POSIX "more" command specification. 1465In this mode, less behaves differently in these ways: 1466.PP 1467The \-e option works differently. 1468If the \-e option is not set, 1469.I less 1470behaves as if the \-E option were set. 1471If the \-e option is set, 1472.I less 1473behaves as if the \-e and \-F options were set. 1474.PP 1475The \-m option works differently. 1476If the \-m option is not set, the medium prompt is used, 1477and it is prefixed with the string "--More--". 1478If the \-m option is set, the short prompt is used. 1479.PP 1480The \-n option acts like the \-z option. 1481The normal behavior of the \-n option is unavailable in this mode. 1482.PP 1483The parameter to the \-p option is taken to be a 1484.I less 1485command rather than a search pattern. 1486.PP 1487The LESS environment variable is ignored, 1488and the MORE environment variable is used in its place. 1489 1490.SH "ENVIRONMENT VARIABLES" 1491Environment variables may be specified either in the system environment 1492as usual, or in a 1493.I lesskey 1494(1) file. 1495If environment variables are defined in more than one place, 1496variables defined in a local lesskey file take precedence over 1497variables defined in the system environment, which take precedence 1498over variables defined in the system-wide lesskey file. 1499.IP COLUMNS 1500Sets the number of columns on the screen. 1501Takes precedence over the number of columns specified by the TERM variable. 1502(But if you have a windowing system which supports TIOCGWINSZ or WIOCGETD, 1503the window system's idea of the screen size takes precedence over the 1504LINES and COLUMNS environment variables.) 1505.IP EDITOR 1506The name of the editor (used for the v command). 1507.IP HOME 1508Name of the user's home directory 1509(used to find a lesskey file on Unix and OS/2 systems). 1510.IP "HOMEDRIVE, HOMEPATH" 1511Concatenation of the HOMEDRIVE and HOMEPATH environment variables is 1512the name of the user's home directory if the HOME variable is not set 1513(only in the Windows version). 1514.IP INIT 1515Name of the user's init directory (used to find a lesskey file on OS/2 systems). 1516.IP LANG 1517Language for determining the character set. 1518.IP LC_CTYPE 1519Language for determining the character set. 1520.IP LESS 1521Options which are passed to 1522.I less 1523automatically. 1524.IP LESSANSIENDCHARS 1525Characters which may end an ANSI color escape sequence 1526(default "m"). 1527.IP LESSANSIMIDCHARS 1528Characters which may appear between the ESC character and the 1529end character in an ANSI color escape sequence 1530(default "0123456789;[?!"'#%()*+\ ". 1531.IP LESSBINFMT 1532Format for displaying non-printable, non-control characters. 1533.IP LESSCHARDEF 1534Defines a character set. 1535.IP LESSCHARSET 1536Selects a predefined character set. 1537.IP LESSCLOSE 1538Command line to invoke the (optional) input-postprocessor. 1539.IP LESSECHO 1540Name of the lessecho program (default "lessecho"). 1541The lessecho program is needed to expand metacharacters, such as * and ?, 1542in filenames on Unix systems. 1543.IP LESSEDIT 1544Editor prototype string (used for the v command). 1545See discussion under PROMPTS. 1546.IP LESSGLOBALTAGS 1547Name of the command used by the \-t option to find global tags. 1548Normally should be set to "global" if your system has the 1549.I global 1550(1) command. If not set, global tags are not used. 1551.IP LESSHISTFILE 1552Name of the history file used to remember search commands and 1553shell commands between invocations of 1554.I less. 1555If set to "\-" or "/dev/null", a history file is not used. 1556The default is "$HOME/.lesshst" on Unix systems, "$HOME/_lesshst" on 1557DOS and Windows systems, or "$HOME/lesshst.ini" or "$INIT/lesshst.ini" 1558on OS/2 systems. 1559.IP LESSHISTSIZE 1560The maximum number of commands to save in the history file. 1561The default is 100. 1562.IP LESSKEY 1563Name of the default lesskey(1) file. 1564.IP LESSKEY_SYSTEM 1565Name of the default system-wide lesskey(1) file. 1566.IP LESSMETACHARS 1567List of characters which are considered "metacharacters" by the shell. 1568.IP LESSMETAESCAPE 1569Prefix which less will add before each metacharacter in a 1570command sent to the shell. 1571If LESSMETAESCAPE is an empty string, commands containing 1572metacharacters will not be passed to the shell. 1573.IP LESSOPEN 1574Command line to invoke the (optional) input-preprocessor. 1575.IP LESSSECURE 1576Runs less in "secure" mode. 1577See discussion under SECURITY. 1578.IP LESSSEPARATOR 1579String to be appended to a directory name in filename completion. 1580.IP LESSUTFBINFMT 1581Format for displaying non-printable Unicode code points. 1582.IP LESS_IS_MORE 1583Emulate the 1584.I more 1585(1) command. 1586.IP LINES 1587Sets the number of lines on the screen. 1588Takes precedence over the number of lines specified by the TERM variable. 1589(But if you have a windowing system which supports TIOCGWINSZ or WIOCGETD, 1590the window system's idea of the screen size takes precedence over the 1591LINES and COLUMNS environment variables.) 1592.IP PATH 1593User's search path (used to find a lesskey file 1594on MS-DOS and OS/2 systems). 1595.IP SHELL 1596The shell used to execute the ! command, as well as to expand filenames. 1597.IP TERM 1598The type of terminal on which 1599.I less 1600is being run. 1601.IP VISUAL 1602The name of the editor (used for the v command). 1603 1604.SH "SEE ALSO" 1605lesskey(1) 1606 1607.SH WARNINGS 1608The = command and prompts (unless changed by \-P) 1609report the line numbers of the lines at the top and bottom of the screen, 1610but the byte and percent of the line after the one at the bottom of the screen. 1611.PP 1612On certain older terminals (the so-called "magic cookie" terminals), 1613search highlighting will cause an erroneous display. 1614On such terminals, search highlighting is disabled by default 1615to avoid possible problems. 1616.PP 1617When searching in a binary file, text which follows a null byte 1618may not be found. 1619This problem does not occur when searching with regular expressions turned 1620off via ^R, and also does not occur when 1621.I less 1622is compiled to use the PCRE regular expression library. 1623.PP 1624In certain cases, when search highlighting is enabled and 1625a search pattern begins with a ^, 1626more text than the matching string may be highlighted. 1627(This problem does not occur when less is compiled to use the POSIX 1628regular expression package.) 1629.PP 1630On some systems, 1631.I setlocale 1632claims that ASCII characters 0 thru 31 are control characters 1633rather than binary characters. 1634This causes 1635.I less 1636to treat some binary files as ordinary, non-binary files. 1637To workaround this problem, set the environment variable 1638LESSCHARSET to "ascii" (or whatever character set is appropriate). 1639.PP 1640This manual is too long. 1641.PP 1642See http://www.greenwoodsoftware.com/less for the latest list of known bugs in less. 1643 1644.SH COPYRIGHT 1645Copyright (C) 1984-2007 Mark Nudelman 1646.PP 1647less is part of the GNU project and is free software. 1648You can redistribute it and/or modify it 1649under the terms of either 1650(1) the GNU General Public License as published by 1651the Free Software Foundation; or (2) the Less License. 1652See the file README in the less distribution for more details 1653regarding redistribution. 1654You should have received a copy of the GNU General Public License 1655along with the source for less; see the file COPYING. 1656If not, write to the Free Software Foundation, 59 Temple Place, 1657Suite 330, Boston, MA 02111-1307, USA. 1658You should also have received a copy of the Less License; 1659see the file LICENSE. 1660.PP 1661less is distributed in the hope that it will be useful, but 1662WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY 1663or FITNESS FOR A PARTICULAR PURPOSE. 1664See the GNU General Public License for more details. 1665 1666.SH AUTHOR 1667.PP 1668Mark Nudelman <markn@greenwoodsoftware.com> 1669.br 1670Send bug reports or comments to the above address or to 1671.br 1672bug-less@gnu.org. 1673.br 1674For more information, see the less homepage at 1675.br 1676http://www.greenwoodsoftware.com/less.
| 2.SH NAME 3less \- opposite of more 4.SH SYNOPSIS 5.B "less \-?" 6.br 7.B "less \-\-help" 8.br 9.B "less \-V" 10.br 11.B "less \-\-version" 12.br 13.B "less [\-[+]aBcCdeEfFgGiIJKLmMnNqQrRsSuUVwWX~]" 14.br 15.B " [\-b \fIspace\fP] [\-h \fIlines\fP] [\-j \fIline\fP] [\-k \fIkeyfile\fP]" 16.br 17.B " [\-{oO} \fIlogfile\fP] [\-p \fIpattern\fP] [\-P \fIprompt\fP] [\-t \fItag\fP]" 18.br 19.B " [\-T \fItagsfile\fP] [\-x \fItab\fP,...] [\-y \fIlines\fP] [\-[z] \fIlines\fP]" 20.br 21.B " [\-# \fIshift\fP] [+[+]\fIcmd\fP] [\-\-] [\fIfilename\fP]..." 22.br 23(See the OPTIONS section for alternate option syntax with long option names.) 24 25.SH DESCRIPTION 26.I Less 27is a program similar to 28.I more 29(1), but which allows backward movement 30in the file as well as forward movement. 31Also, 32.I less 33does not have to read the entire input file before starting, 34so with large input files it starts up faster than text editors like 35.I vi 36(1). 37.I Less 38uses termcap (or terminfo on some systems), 39so it can run on a variety of terminals. 40There is even limited support for hardcopy terminals. 41(On a hardcopy terminal, lines which should be printed at the top 42of the screen are prefixed with a caret.) 43.PP 44Commands are based on both 45.I more 46and 47.I vi. 48Commands may be preceded by a decimal number, 49called N in the descriptions below. 50The number is used by some commands, as indicated. 51 52.SH COMMANDS 53In the following descriptions, ^X means control-X. 54ESC stands for the ESCAPE key; for example ESC-v means the 55two character sequence "ESCAPE", then "v". 56.IP "h or H" 57Help: display a summary of these commands. 58If you forget all the other commands, remember this one. 59.IP "SPACE or ^V or f or ^F" 60Scroll forward N lines, default one window (see option \-z below). 61If N is more than the screen size, only the final screenful is displayed. 62Warning: some systems use ^V as a special literalization character. 63.IP "z" 64Like SPACE, but if N is specified, it becomes the new window size. 65.IP "ESC-SPACE" 66Like SPACE, but scrolls a full screenful, even if it reaches 67end-of-file in the process. 68.IP "RETURN or ^N or e or ^E or j or ^J" 69Scroll forward N lines, default 1. 70The entire N lines are displayed, even if N is more than the screen size. 71.IP "d or ^D" 72Scroll forward N lines, default one half of the screen size. 73If N is specified, it becomes the new default for 74subsequent d and u commands. 75.IP "b or ^B or ESC-v" 76Scroll backward N lines, default one window (see option \-z below). 77If N is more than the screen size, only the final screenful is displayed. 78.IP "w" 79Like ESC-v, but if N is specified, it becomes the new window size. 80.IP "y or ^Y or ^P or k or ^K" 81Scroll backward N lines, default 1. 82The entire N lines are displayed, even if N is more than the screen size. 83Warning: some systems use ^Y as a special job control character. 84.IP "u or ^U" 85Scroll backward N lines, default one half of the screen size. 86If N is specified, it becomes the new default for 87subsequent d and u commands. 88.IP "ESC-) or RIGHTARROW" 89Scroll horizontally right N characters, default half the screen width 90(see the \-# option). 91If a number N is specified, it becomes the default for future RIGHTARROW 92and LEFTARROW commands. 93While the text is scrolled, it acts as though the \-S option 94(chop lines) were in effect. 95.IP "ESC-( or LEFTARROW" 96Scroll horizontally left N characters, default half the screen width 97(see the \-# option). 98If a number N is specified, it becomes the default for future RIGHTARROW 99and LEFTARROW commands. 100.IP "r or ^R or ^L" 101Repaint the screen. 102.IP R 103Repaint the screen, discarding any buffered input. 104Useful if the file is changing while it is being viewed. 105.IP "F" 106Scroll forward, and keep trying to read when the 107end of file is reached. 108Normally this command would be used when already at the end of the file. 109It is a way to monitor the tail of a file which is growing 110while it is being viewed. 111(The behavior is similar to the "tail \-f" command.) 112.IP "g or < or ESC-<" 113Go to line N in the file, default 1 (beginning of file). 114(Warning: this may be slow if N is large.) 115.IP "G or > or ESC->" 116Go to line N in the file, default the end of the file. 117(Warning: this may be slow if N is large, 118or if N is not specified and 119standard input, rather than a file, is being read.) 120.IP "p or %" 121Go to a position N percent into the file. 122N should be between 0 and 100, and may contain a decimal point. 123.IP "P" 124Go to the line containing byte offset N in the file. 125.IP "{" 126If a left curly bracket appears in the top line displayed 127on the screen, 128the { command will go to the matching right curly bracket. 129The matching right curly bracket is positioned on the bottom 130line of the screen. 131If there is more than one left curly bracket on the top line, 132a number N may be used to specify the N-th bracket on the line. 133.IP "}" 134If a right curly bracket appears in the bottom line displayed 135on the screen, 136the } command will go to the matching left curly bracket. 137The matching left curly bracket is positioned on the top 138line of the screen. 139If there is more than one right curly bracket on the top line, 140a number N may be used to specify the N-th bracket on the line. 141.IP "(" 142Like {, but applies to parentheses rather than curly brackets. 143.IP ")" 144Like }, but applies to parentheses rather than curly brackets. 145.IP "[" 146Like {, but applies to square brackets rather than curly brackets. 147.IP "]" 148Like }, but applies to square brackets rather than curly brackets. 149.IP "ESC-^F" 150Followed by two characters, 151acts like {, but uses the two characters as open and close brackets, 152respectively. 153For example, "ESC ^F < >" could be used to 154go forward to the > which matches the < in the top displayed line. 155.IP "ESC-^B" 156Followed by two characters, 157acts like }, but uses the two characters as open and close brackets, 158respectively. 159For example, "ESC ^B < >" could be used to 160go backward to the < which matches the > in the bottom displayed line. 161.IP m 162Followed by any lowercase letter, 163marks the current position with that letter. 164.IP "'" 165(Single quote.) 166Followed by any lowercase letter, returns to the position which 167was previously marked with that letter. 168Followed by another single quote, returns to the position at 169which the last "large" movement command was executed. 170Followed by a ^ or $, jumps to the beginning or end of the 171file respectively. 172Marks are preserved when a new file is examined, 173so the ' command can be used to switch between input files. 174.IP "^X^X" 175Same as single quote. 176.IP /pattern 177Search forward in the file for the N-th line containing the pattern. 178N defaults to 1. 179The pattern is a regular expression, as recognized by 180the regular expression library supplied by your system. 181The search starts at the second line displayed 182(but see the \-a and \-j options, which change this). 183.sp 184Certain characters are special 185if entered at the beginning of the pattern; 186they modify the type of search rather than become part of the pattern: 187.RS 188.IP "^N or !" 189Search for lines which do NOT match the pattern. 190.IP "^E or *" 191Search multiple files. 192That is, if the search reaches the END of the current file 193without finding a match, 194the search continues in the next file in the command line list. 195.IP "^F or @" 196Begin the search at the first line of the FIRST file 197in the command line list, 198regardless of what is currently displayed on the screen 199or the settings of the \-a or \-j options. 200.IP "^K" 201Highlight any text which matches the pattern on the current screen, 202but don't move to the first match (KEEP current position). 203.IP "^R" 204Don't interpret regular expression metacharacters; 205that is, do a simple textual comparison. 206.RE 207.IP ?pattern 208Search backward in the file for the N-th line containing the pattern. 209The search starts at the line immediately before the top line displayed. 210.sp 211Certain characters are special as in the / command: 212.RS 213.IP "^N or !" 214Search for lines which do NOT match the pattern. 215.IP "^E or *" 216Search multiple files. 217That is, if the search reaches the beginning of the current file 218without finding a match, 219the search continues in the previous file in the command line list. 220.IP "^F or @" 221Begin the search at the last line of the last file 222in the command line list, 223regardless of what is currently displayed on the screen 224or the settings of the \-a or \-j options. 225.IP "^K" 226As in forward searches. 227.IP "^R" 228As in forward searches. 229.RE 230.IP "ESC-/pattern" 231Same as "/*". 232.IP "ESC-?pattern" 233Same as "?*". 234.IP n 235Repeat previous search, for N-th line containing the last pattern. 236If the previous search was modified by ^N, the search is made for the 237N-th line NOT containing the pattern. 238If the previous search was modified by ^E, the search continues 239in the next (or previous) file if not satisfied in the current file. 240If the previous search was modified by ^R, the search is done 241without using regular expressions. 242There is no effect if the previous search was modified by ^F or ^K. 243.IP N 244Repeat previous search, but in the reverse direction. 245.IP "ESC-n" 246Repeat previous search, but crossing file boundaries. 247The effect is as if the previous search were modified by *. 248.IP "ESC-N" 249Repeat previous search, but in the reverse direction 250and crossing file boundaries. 251.IP "ESC-u" 252Undo search highlighting. 253Turn off highlighting of strings matching the current search pattern. 254If highlighting is already off because of a previous ESC-u command, 255turn highlighting back on. 256Any search command will also turn highlighting back on. 257(Highlighting can also be disabled by toggling the \-G option; 258in that case search commands do not turn highlighting back on.) 259.IP ":e [filename]" 260Examine a new file. 261If the filename is missing, the "current" file (see the :n and :p commands 262below) from the list of files in the command line is re-examined. 263A percent sign (%) in the filename is replaced by the name of the 264current file. 265A pound sign (#) is replaced by the name of the previously examined file. 266However, two consecutive percent signs are simply 267replaced with a single percent sign. 268This allows you to enter a filename that contains a percent sign 269in the name. 270Similarly, two consecutive pound signs are replaced with a single pound sign. 271The filename is inserted into the command line list of files 272so that it can be seen by subsequent :n and :p commands. 273If the filename consists of several files, they are all inserted into 274the list of files and the first one is examined. 275If the filename contains one or more spaces, 276the entire filename should be enclosed in double quotes 277(also see the \-" option). 278.IP "^X^V or E" 279Same as :e. 280Warning: some systems use ^V as a special literalization character. 281On such systems, you may not be able to use ^V. 282.IP ":n" 283Examine the next file (from the list of files given in the command line). 284If a number N is specified, the N-th next file is examined. 285.IP ":p" 286Examine the previous file in the command line list. 287If a number N is specified, the N-th previous file is examined. 288.IP ":x" 289Examine the first file in the command line list. 290If a number N is specified, the N-th file in the list is examined. 291.IP ":d" 292Remove the current file from the list of files. 293.IP "t" 294Go to the next tag, if there were more than one matches for the current tag. 295See the \-t option for more details about tags. 296.IP "T" 297Go to the previous tag, if there were more than one matches for the current tag. 298.IP "= or ^G or :f" 299Prints some information about the file being viewed, 300including its name 301and the line number and byte offset of the bottom line being displayed. 302If possible, it also prints the length of the file, 303the number of lines in the file 304and the percent of the file above the last displayed line. 305.IP \- 306Followed by one of the command line option letters (see OPTIONS below), 307this will change the setting of that option 308and print a message describing the new setting. 309If a ^P (CONTROL-P) is entered immediately after the dash, 310the setting of the option is changed but no message is printed. 311If the option letter has a numeric value (such as \-b or \-h), 312or a string value (such as \-P or \-t), 313a new value may be entered after the option letter. 314If no new value is entered, a message describing 315the current setting is printed and nothing is changed. 316.IP \-\- 317Like the \- command, but takes a long option name (see OPTIONS below) 318rather than a single option letter. 319You must press RETURN after typing the option name. 320A ^P immediately after the second dash suppresses printing of a 321message describing the new setting, as in the \- command. 322.IP \-+ 323Followed by one of the command line option letters 324this will reset the option to its default setting 325and print a message describing the new setting. 326(The "\-+\fIX\fP" command does the same thing 327as "\-+\fIX\fP" on the command line.) 328This does not work for string-valued options. 329.IP \-\-+ 330Like the \-+ command, but takes a long option name 331rather than a single option letter. 332.IP \-! 333Followed by one of the command line option letters, 334this will reset the option to the "opposite" of its default setting 335and print a message describing the new setting. 336This does not work for numeric or string-valued options. 337.IP \-\-! 338Like the \-! command, but takes a long option name 339rather than a single option letter. 340.IP _ 341(Underscore.) 342Followed by one of the command line option letters, 343this will print a message describing the current setting of that option. 344The setting of the option is not changed. 345.IP __ 346(Double underscore.) 347Like the _ (underscore) command, but takes a long option name 348rather than a single option letter. 349You must press RETURN after typing the option name. 350.IP +cmd 351Causes the specified cmd to be executed each time a new file is examined. 352For example, +G causes 353.I less 354to initially display each file starting at the end 355rather than the beginning. 356.IP V 357Prints the version number of 358.I less 359being run. 360.IP "q or Q or :q or :Q or ZZ" 361Exits 362.I less. 363.PP 364The following 365four 366commands may or may not be valid, depending on your particular installation. 367.PP 368.IP v 369Invokes an editor to edit the current file being viewed. 370The editor is taken from the environment variable VISUAL if defined, 371or EDITOR if VISUAL is not defined, 372or defaults to "vi" if neither VISUAL nor EDITOR is defined. 373See also the discussion of LESSEDIT under the section on PROMPTS below. 374.IP "! shell-command" 375Invokes a shell to run the shell-command given. 376A percent sign (%) in the command is replaced by the name of the 377current file. 378A pound sign (#) is replaced by the name of the previously examined file. 379"!!" repeats the last shell command. 380"!" with no shell command simply invokes a shell. 381On Unix systems, the shell is taken from the environment variable SHELL, 382or defaults to "sh". 383On MS-DOS and OS/2 systems, the shell is the normal command processor. 384.IP "| <m> shell-command" 385<m> represents any mark letter. 386Pipes a section of the input file to the given shell command. 387The section of the file to be piped is between the first line on 388the current screen and the position marked by the letter. 389<m> may also be ^ or $ to indicate beginning or end of file respectively. 390If <m> is . or newline, the current screen is piped. 391.IP "s filename" 392Save the input to a file. 393This only works if the input is a pipe, not an ordinary file. 394.PP 395.SH OPTIONS 396Command line options are described below. 397Most options may be changed while 398.I less 399is running, via the "\-" command. 400.PP 401Most options may be given in one of two forms: 402either a dash followed by a single letter, 403or two dashes followed by a long option name. 404A long option name may be abbreviated as long as 405the abbreviation is unambiguous. 406For example, \-\-quit-at-eof may be abbreviated \-\-quit, but not 407--qui, since both \-\-quit-at-eof and \-\-quiet begin with \-\-qui. 408Some long option names are in uppercase, such as \-\-QUIT-AT-EOF, as 409distinct from \-\-quit-at-eof. 410Such option names need only have their first letter capitalized; 411the remainder of the name may be in either case. 412For example, \-\-Quit-at-eof is equivalent to \-\-QUIT-AT-EOF. 413.PP 414Options are also taken from the environment variable "LESS". 415For example, 416to avoid typing "less \-options ..." each time 417.I less 418is invoked, you might tell 419.I csh: 420.sp 421setenv LESS "-options" 422.sp 423or if you use 424.I sh: 425.sp 426LESS="-options"; export LESS 427.sp 428On MS-DOS, you don't need the quotes, but you should replace any 429percent signs in the options string by double percent signs. 430.sp 431The environment variable is parsed before the command line, 432so command line options override the LESS environment variable. 433If an option appears in the LESS variable, it can be reset 434to its default value on the command line by beginning the command 435line option with "\-+". 436.sp 437For options like \-P or \-D which take a following string, 438a dollar sign ($) must be used to signal the end of the string. 439For example, to set two \-D options on MS-DOS, you must have 440a dollar sign between them, like this: 441.sp 442LESS="-Dn9.1$-Ds4.1" 443.sp 444.IP "\-? or \-\-help" 445This option displays a summary of the commands accepted by 446.I less 447(the same as the h command). 448(Depending on how your shell interprets the question mark, 449it may be necessary to quote the question mark, thus: "\-\e?".) 450.IP "\-a or \-\-search-skip-screen" 451Causes searches to start after the last line 452displayed on the screen, 453thus skipping all lines displayed on the screen. 454By default, searches start at the second line on the screen 455(or after the last found line; see the \-j option). 456.IP "\-b\fIn\fP or \-\-buffers=\fIn\fP" 457Specifies the amount of buffer space 458.I less 459will use for each file, in units of kilobytes (1024 bytes). 460By default 64K of buffer space is used for each file 461(unless the file is a pipe; see the \-B option). 462The \-b option specifies instead that \fIn\fP kilobytes of 463buffer space should be used for each file. 464If \fIn\fP is \-1, buffer space is unlimited; that is, 465the entire file is read into memory. 466.IP "\-B or \-\-auto-buffers" 467By default, when data is read from a pipe, 468buffers are allocated automatically as needed. 469If a large amount of data is read from the pipe, this can cause 470a large amount of memory to be allocated. 471The \-B option disables this automatic allocation of buffers for pipes, 472so that only 64K 473(or the amount of space specified by the \-b option) 474is used for the pipe. 475Warning: use of \-B can result in erroneous display, since only the 476most recently viewed part of the file is kept in memory; 477any earlier data is lost. 478.IP "\-c or \-\-clear-screen" 479Causes full screen repaints to be painted from the top line down. 480By default, 481full screen repaints are done by scrolling from the bottom of the screen. 482.IP "\-C or \-\-CLEAR-SCREEN" 483Same as \-c, for compatibility with older versions of 484.I less. 485.IP "\-d or \-\-dumb" 486The \-d option suppresses the error message 487normally displayed if the terminal is dumb; 488that is, lacks some important capability, 489such as the ability to clear the screen or scroll backward. 490The \-d option does not otherwise change the behavior of 491.I less 492on a dumb terminal. 493.IP "\-D\fBx\fP\fIcolor\fP or \-\-color=\fBx\fP\fIcolor\fP" 494[MS-DOS only] 495Sets the color of the text displayed. 496\fBx\fP is a single character which selects the type of text whose color is 497being set: n=normal, s=standout, d=bold, u=underlined, k=blink. 498\fIcolor\fP is a pair of numbers separated by a period. 499The first number selects the foreground color and the second selects 500the background color of the text. 501A single number \fIN\fP is the same as \fIN.0\fP. 502.IP "\-e or \-\-quit-at-eof" 503Causes 504.I less 505to automatically exit 506the second time it reaches end-of-file. 507By default, the only way to exit 508.I less 509is via the "q" command. 510.IP "\-E or \-\-QUIT-AT-EOF" 511Causes 512.I less 513to automatically exit the first time it reaches end-of-file. 514.IP "\-f or \-\-force" 515Forces non-regular files to be opened. 516(A non-regular file is a directory or a device special file.) 517Also suppresses the warning message when a binary file is opened. 518By default, 519.I less 520will refuse to open non-regular files. 521Note that some operating systems will not allow directories 522to be read, even if \-f is set. 523.IP "\-F or \-\-quit-if-one-screen" 524Causes 525.I less 526to automatically exit 527if the entire file can be displayed on the first screen. 528.IP "\-g or \-\-hilite-search" 529Normally, 530.I less 531will highlight ALL strings which match the last search command. 532The \-g option changes this behavior to highlight only the particular string 533which was found by the last search command. 534This can cause 535.I less 536to run somewhat faster than the default. 537.IP "\-G or \-\-HILITE-SEARCH" 538The \-G option suppresses all highlighting of strings found by search commands. 539.IP "\-h\fIn\fP or \-\-max-back-scroll=\fIn\fP" 540Specifies a maximum number of lines to scroll backward. 541If it is necessary to scroll backward more than \fIn\fP lines, 542the screen is repainted in a forward direction instead. 543(If the terminal does not have the ability to scroll 544backward, \-h0 is implied.) 545.IP "\-i or \-\-ignore-case" 546Causes searches to ignore case; that is, 547uppercase and lowercase are considered identical. 548This option is ignored if any uppercase letters 549appear in the search pattern; 550in other words, 551if a pattern contains uppercase letters, then that search does not ignore case. 552.IP "\-I or \-\-IGNORE-CASE" 553Like \-i, but searches ignore case even if 554the pattern contains uppercase letters. 555.IP "\-j\fIn\fP or \-\-jump-target=\fIn\fP" 556Specifies a line on the screen where the "target" line 557is to be positioned. 558A target line is the object of a text search, 559tag search, jump to a line number, 560jump to a file percentage, or jump to a marked position. 561The screen line may be specified by a number: the top line on the screen 562is 1, the next is 2, and so on. 563The number may be negative to specify a line relative to the bottom 564of the screen: the bottom line on the screen is \-1, the second 565to the bottom is \-2, and so on. 566Alternately, the screen line may be specified as a fraction of the height 567of the screen, starting with a decimal point: .5 is in the middle of the 568screen, .3 is three tenths down from the first line, and so on. 569If the line is specified as a fraction, the actual line number 570is recalculated if the terminal window is resized, so that the 571target line remains at the specified fraction of the screen height. 572If the \-j option is used, searches begin at the line immediately 573after the target line. 574For example, if "\-j4" is used, the target line is the 575fourth line on the screen, so searches begin at the fifth line 576on the screen. 577.IP "\-J or \-\-status-column" 578Displays a status column at the left edge of the screen. 579The status column shows the lines that matched the current search. 580The status column is also used if the \-w or \-W option is in effect. 581.IP "\-k\fIfilename\fP or \-\-lesskey-file=\fIfilename\fP" 582Causes 583.I less 584to open and interpret the named file as a 585.I lesskey 586(1) file. 587Multiple \-k options may be specified. 588If the LESSKEY or LESSKEY_SYSTEM environment variable is set, or 589if a lesskey file is found in a standard place (see KEY BINDINGS), 590it is also used as a 591.I lesskey 592file. 593.IP "\-K or \-\-quit-on-intr" 594Causes 595.I less 596to exit immediately when an interrupt character (usually ^C) is typed. 597Normally, an interrupt character causes 598.I less 599to stop whatever it is doing and return to its command prompt. 600.IP "\-L or \-\-no-lessopen" 601Ignore the LESSOPEN environment variable 602(see the INPUT PREPROCESSOR section below). 603This option can be set from within \fIless\fP, 604but it will apply only to files opened subsequently, not to the 605file which is currently open. 606.IP "\-m or \-\-long-prompt" 607Causes 608.I less 609to prompt verbosely (like \fImore\fP), 610with the percent into the file. 611By default, 612.I less 613prompts with a colon. 614.IP "\-M or \-\-LONG-PROMPT" 615Causes 616.I less 617to prompt even more verbosely than 618.I more. 619.IP "\-n or \-\-line-numbers" 620Suppresses line numbers. 621The default (to use line numbers) may cause 622.I less 623to run more slowly in some cases, especially with a very large input file. 624Suppressing line numbers with the \-n option will avoid this problem. 625Using line numbers means: the line number will be displayed in the verbose 626prompt and in the = command, 627and the v command will pass the current line number to the editor 628(see also the discussion of LESSEDIT in PROMPTS below). 629.IP "\-N or \-\-LINE-NUMBERS" 630Causes a line number to be displayed at the beginning of 631each line in the display. 632.IP "\-o\fIfilename\fP or \-\-log-file=\fIfilename\fP" 633Causes 634.I less 635to copy its input to the named file as it is being viewed. 636This applies only when the input file is a pipe, 637not an ordinary file. 638If the file already exists, 639.I less 640will ask for confirmation before overwriting it. 641.IP "\-O\fIfilename\fP or \-\-LOG-FILE=\fIfilename\fP" 642The \-O option is like \-o, but it will overwrite an existing 643file without asking for confirmation. 644.sp 645If no log file has been specified, 646the \-o and \-O options can be used from within 647.I less 648to specify a log file. 649Without a file name, they will simply report the name of the log file. 650The "s" command is equivalent to specifying \-o from within 651.I less. 652.IP "\-p\fIpattern\fP or \-\-pattern=\fIpattern\fP" 653The \-p option on the command line is equivalent to 654specifying +/\fIpattern\fP; 655that is, it tells 656.I less 657to start at the first occurrence of \fIpattern\fP in the file. 658.IP "\-P\fIprompt\fP or \-\-prompt=\fIprompt\fP" 659Provides a way to tailor the three prompt 660styles to your own preference. 661This option would normally be put in the LESS environment 662variable, rather than being typed in with each 663.I less 664command. 665Such an option must either be the last option in the LESS variable, 666or be terminated by a dollar sign. 667-Ps followed by a string changes the default (short) prompt 668to that string. 669-Pm changes the medium (\-m) prompt. 670-PM changes the long (\-M) prompt. 671-Ph changes the prompt for the help screen. 672-P= changes the message printed by the = command. 673-Pw changes the message printed while waiting for data (in the F command). 674All prompt strings consist of a sequence of 675letters and special escape sequences. 676See the section on PROMPTS for more details. 677.IP "\-q or \-\-quiet or \-\-silent" 678Causes moderately "quiet" operation: 679the terminal bell is not rung 680if an attempt is made to scroll past the end of the file 681or before the beginning of the file. 682If the terminal has a "visual bell", it is used instead. 683The bell will be rung on certain other errors, 684such as typing an invalid character. 685The default is to ring the terminal bell in all such cases. 686.IP "\-Q or \-\-QUIET or \-\-SILENT" 687Causes totally "quiet" operation: 688the terminal bell is never rung. 689.IP "\-r or \-\-raw-control-chars" 690Causes "raw" control characters to be displayed. 691The default is to display control characters using the caret notation; 692for example, a control-A (octal 001) is displayed as "^A". 693Warning: when the \-r option is used, 694.I less 695cannot keep track of the actual appearance of the screen 696(since this depends on how the screen responds to 697each type of control character). 698Thus, various display problems may result, 699such as long lines being split in the wrong place. 700.IP "\-R or \-\-RAW-CONTROL-CHARS" 701Like \-r, but only ANSI "color" escape sequences are output in "raw" form. 702Unlike \-r, the screen appearance is maintained correctly in most cases. 703ANSI "color" escape sequences are sequences of the form: 704.sp 705 ESC [ ... m 706.sp 707where the "..." is zero or more color specification characters 708For the purpose of keeping track of screen appearance, 709ANSI color escape sequences are assumed to not move the cursor. 710You can make 711.I less 712think that characters other than "m" can end ANSI color escape sequences 713by setting the environment variable LESSANSIENDCHARS to the list of 714characters which can end a color escape sequence. 715And you can make 716.I less 717think that characters other than the standard ones may appear between 718the ESC and the m by setting the environment variable LESSANSIMIDCHARS 719to the list of characters which can appear. 720.IP "\-s or \-\-squeeze-blank-lines" 721Causes consecutive blank lines to be squeezed into a single blank line. 722This is useful when viewing 723.I nroff 724output. 725.IP "\-S or \-\-chop-long-lines" 726Causes lines longer than the screen width to be 727chopped rather than folded. 728That is, the portion of a long line that does not fit in 729the screen width is not shown. 730The default is to fold long lines; that is, display the remainder 731on the next line. 732.IP "\-t\fItag\fP or \-\-tag=\fItag\fP" 733The \-t option, followed immediately by a TAG, 734will edit the file containing that tag. 735For this to work, tag information must be available; 736for example, there may be a file in the current directory called "tags", 737which was previously built by 738.I ctags 739(1) or an equivalent command. 740If the environment variable LESSGLOBALTAGS is set, it is taken to be 741the name of a command compatible with 742.I global 743(1), and that command is executed to find the tag. 744(See http://www.gnu.org/software/global/global.html). 745The \-t option may also be specified from within 746.I less 747(using the \- command) as a way of examining a new file. 748The command ":t" is equivalent to specifying \-t from within 749.I less. 750.IP "\-T\fItagsfile\fP or \-\-tag-file=\fItagsfile\fP" 751Specifies a tags file to be used instead of "tags". 752.IP "\-u or \-\-underline-special" 753Causes backspaces and carriage returns to be treated as printable characters; 754that is, they are sent to the terminal when they appear in the input. 755.IP "\-U or \-\-UNDERLINE-SPECIAL" 756Causes backspaces, tabs and carriage returns to be 757treated as control characters; 758that is, they are handled as specified by the \-r option. 759.sp 760By default, if neither \-u nor \-U is given, 761backspaces which appear adjacent to an underscore character 762are treated specially: 763the underlined text is displayed 764using the terminal's hardware underlining capability. 765Also, backspaces which appear between two identical characters 766are treated specially: 767the overstruck text is printed 768using the terminal's hardware boldface capability. 769Other backspaces are deleted, along with the preceding character. 770Carriage returns immediately followed by a newline are deleted. 771other carriage returns are handled as specified by the \-r option. 772Text which is overstruck or underlined can be searched for 773if neither \-u nor \-U is in effect. 774.IP "\-V or \-\-version" 775Displays the version number of 776.I less. 777.IP "\-w or \-\-hilite-unread" 778Temporarily highlights the first "new" line after a forward movement 779of a full page. 780The first "new" line is the line immediately following the line previously 781at the bottom of the screen. 782Also highlights the target line after a g or p command. 783The highlight is removed at the next command which causes movement. 784The entire line is highlighted, unless the \-J option is in effect, 785in which case only the status column is highlighted. 786.IP "\-W or \-\-HILITE-UNREAD" 787Like \-w, but temporarily highlights the first new line after any 788forward movement command larger than one line. 789.IP "\-x\fIn\fP,... or \-\-tabs=\fIn\fP,..." 790Sets tab stops. 791If only one \fIn\fP is specified, tab stops are set at multiples of \fIn\fP. 792If multiple values separated by commas are specified, tab stops 793are set at those positions, and then continue with the same spacing as the 794last two. 795For example, \fI-x9,17\fP will set tabs at positions 9, 17, 25, 33, etc. 796The default for \fIn\fP is 8. 797.IP "\-X or \-\-no-init" 798Disables sending the termcap initialization and deinitialization strings 799to the terminal. 800This is sometimes desirable if the deinitialization string does 801something unnecessary, like clearing the screen. 802.IP "\-\-no-keypad" 803Disables sending the keypad initialization and deinitialization strings 804to the terminal. 805This is sometimes useful if the keypad strings make the numeric 806keypad behave in an undesirable manner. 807.IP "\-y\fIn\fP or \-\-max-forw-scroll=\fIn\fP" 808Specifies a maximum number of lines to scroll forward. 809If it is necessary to scroll forward more than \fIn\fP lines, 810the screen is repainted instead. 811The \-c or \-C option may be used to repaint from the top of 812the screen if desired. 813By default, any forward movement causes scrolling. 814.IP "\-[z]\fIn\fP or \-\-window=\fIn\fP" 815Changes the default scrolling window size to \fIn\fP lines. 816The default is one screenful. 817The z and w commands can also be used to change the window size. 818The "z" may be omitted for compatibility with some versions of 819.I more. 820If the number 821.I n 822is negative, it indicates 823.I n 824lines less than the current screen size. 825For example, if the screen is 24 lines, \fI\-z-4\fP sets the 826scrolling window to 20 lines. If the screen is resized to 40 lines, 827the scrolling window automatically changes to 36 lines. 828.IP "\-\fI\(dqcc\fP\ or\ \-\-quotes=\fIcc\fP" 829Changes the filename quoting character. 830This may be necessary if you are trying to name a file 831which contains both spaces and quote characters. 832Followed by a single character, this changes the quote character to that 833character. 834Filenames containing a space should then be surrounded by that character 835rather than by double quotes. 836Followed by two characters, changes the open quote to the first character, 837and the close quote to the second character. 838Filenames containing a space should then be preceded by the open quote 839character and followed by the close quote character. 840Note that even after the quote characters are changed, this option 841remains \-" (a dash followed by a double quote). 842.IP "\-~ or \-\-tilde" 843Normally lines after end of file are displayed as a single tilde (~). 844This option causes lines after end of file to be displayed as blank lines. 845.IP "\-# or \-\-shift" 846Specifies the default number of positions to scroll horizontally 847in the RIGHTARROW and LEFTARROW commands. 848If the number specified is zero, it sets the default number of 849positions to one half of the screen width. 850.IP \-\- 851A command line argument of "\-\-" marks the end of option arguments. 852Any arguments following this are interpreted as filenames. 853This can be useful when viewing a file whose name begins with a "\-" or "+". 854.IP + 855If a command line option begins with \fB+\fP, 856the remainder of that option is taken to be an initial command to 857.I less. 858For example, +G tells 859.I less 860to start at the end of the file rather than the beginning, 861and +/xyz tells it to start at the first occurrence of "xyz" in the file. 862As a special case, +<number> acts like +<number>g; 863that is, it starts the display at the specified line number 864(however, see the caveat under the "g" command above). 865If the option starts with ++, the initial command applies to 866every file being viewed, not just the first one. 867The + command described previously 868may also be used to set (or change) an initial command for every file. 869 870.SH "LINE EDITING" 871When entering command line at the bottom of the screen 872(for example, a filename for the :e command, 873or the pattern for a search command), 874certain keys can be used to manipulate the command line. 875Most commands have an alternate form in [ brackets ] which can be used if 876a key does not exist on a particular keyboard. 877(The bracketed forms do not work in the MS-DOS version.) 878Any of these special keys may be entered literally by preceding 879it with the "literal" character, either ^V or ^A. 880A backslash itself may also be entered literally by entering two backslashes. 881.IP "LEFTARROW [ ESC-h ]" 882Move the cursor one space to the left. 883.IP "RIGHTARROW [ ESC-l ]" 884Move the cursor one space to the right. 885.IP "^LEFTARROW [ ESC-b or ESC-LEFTARROW ]" 886(That is, CONTROL and LEFTARROW simultaneously.) 887Move the cursor one word to the left. 888.IP "^RIGHTARROW [ ESC-w or ESC-RIGHTARROW ]" 889(That is, CONTROL and RIGHTARROW simultaneously.) 890Move the cursor one word to the right. 891.IP "HOME [ ESC-0 ]" 892Move the cursor to the beginning of the line. 893.IP "END [ ESC-$ ]" 894Move the cursor to the end of the line. 895.IP "BACKSPACE" 896Delete the character to the left of the cursor, 897or cancel the command if the command line is empty. 898.IP "DELETE or [ ESC-x ]" 899Delete the character under the cursor. 900.IP "^BACKSPACE [ ESC-BACKSPACE ]" 901(That is, CONTROL and BACKSPACE simultaneously.) 902Delete the word to the left of the cursor. 903.IP "^DELETE [ ESC-X or ESC-DELETE ]" 904(That is, CONTROL and DELETE simultaneously.) 905Delete the word under the cursor. 906.IP "UPARROW [ ESC-k ]" 907Retrieve the previous command line. 908.IP "DOWNARROW [ ESC-j ]" 909Retrieve the next command line. 910.IP "TAB" 911Complete the partial filename to the left of the cursor. 912If it matches more than one filename, the first match 913is entered into the command line. 914Repeated TABs will cycle thru the other matching filenames. 915If the completed filename is a directory, a "/" is appended to the filename. 916(On MS-DOS systems, a "\e" is appended.) 917The environment variable LESSSEPARATOR can be used to specify a 918different character to append to a directory name. 919.IP "BACKTAB [ ESC-TAB ]" 920Like, TAB, but cycles in the reverse direction thru the matching filenames. 921.IP "^L" 922Complete the partial filename to the left of the cursor. 923If it matches more than one filename, all matches are entered into 924the command line (if they fit). 925.IP "^U (Unix and OS/2) or ESC (MS-DOS)" 926Delete the entire command line, 927or cancel the command if the command line is empty. 928If you have changed your line-kill character in Unix to something 929other than ^U, that character is used instead of ^U. 930 931.SH "KEY BINDINGS" 932You may define your own 933.I less 934commands by using the program 935.I lesskey 936(1) 937to create a lesskey file. 938This file specifies a set of command keys and an action 939associated with each key. 940You may also use 941.I lesskey 942to change the line-editing keys (see LINE EDITING), 943and to set environment variables. 944If the environment variable LESSKEY is set, 945.I less 946uses that as the name of the lesskey file. 947Otherwise, 948.I less 949looks in a standard place for the lesskey file: 950On Unix systems, 951.I less 952looks for a lesskey file called "$HOME/.less". 953On MS-DOS and Windows systems, 954.I less 955looks for a lesskey file called "$HOME/_less", and if it is not found there, 956then looks for a lesskey file called "_less" in any directory specified 957in the PATH environment variable. 958On OS/2 systems, 959.I less 960looks for a lesskey file called "$HOME/less.ini", and if it is not found, 961then looks for a lesskey file called "less.ini" in any directory specified 962in the INIT environment variable, and if it not found there, 963then looks for a lesskey file called "less.ini" in any directory specified 964in the PATH environment variable. 965See the 966.I lesskey 967manual page for more details. 968.P 969A system-wide lesskey file may also be set up to provide key bindings. 970If a key is defined in both a local lesskey file and in the 971system-wide file, key bindings in the local file take precedence over 972those in the system-wide file. 973If the environment variable LESSKEY_SYSTEM is set, 974.I less 975uses that as the name of the system-wide lesskey file. 976Otherwise, 977.I less 978looks in a standard place for the system-wide lesskey file: 979On Unix systems, the system-wide lesskey file is /usr/local/etc/sysless. 980(However, if 981.I less 982was built with a different sysconf directory than /usr/local/etc, 983that directory is where the sysless file is found.) 984On MS-DOS and Windows systems, the system-wide lesskey file is c:\e_sysless. 985On OS/2 systems, the system-wide lesskey file is c:\esysless.ini. 986 987.SH "INPUT PREPROCESSOR" 988You may define an "input preprocessor" for 989.I less. 990Before 991.I less 992opens a file, it first gives your input preprocessor a chance to modify the 993way the contents of the file are displayed. 994An input preprocessor is simply an executable program (or shell script), 995which writes the contents of the file to a different file, 996called the replacement file. 997The contents of the replacement file are then displayed 998in place of the contents of the original file. 999However, it will appear to the user as if the original file is opened; 1000that is, 1001.I less 1002will display the original filename as the name of the current file. 1003.PP 1004An input preprocessor receives one command line argument, the original filename, 1005as entered by the user. 1006It should create the replacement file, and when finished, 1007print the name of the replacement file to its standard output. 1008If the input preprocessor does not output a replacement filename, 1009.I less 1010uses the original file, as normal. 1011The input preprocessor is not called when viewing standard input. 1012To set up an input preprocessor, set the LESSOPEN environment variable 1013to a command line which will invoke your input preprocessor. 1014This command line should include one occurrence of the string "%s", 1015which will be replaced by the filename 1016when the input preprocessor command is invoked. 1017.PP 1018When 1019.I less 1020closes a file opened in such a way, it will call another program, 1021called the input postprocessor, 1022which may perform any desired clean-up action (such as deleting the 1023replacement file created by LESSOPEN). 1024This program receives two command line arguments, the original filename 1025as entered by the user, and the name of the replacement file. 1026To set up an input postprocessor, set the LESSCLOSE environment variable 1027to a command line which will invoke your input postprocessor. 1028It may include two occurrences of the string "%s"; 1029the first is replaced with the original name of the file and 1030the second with the name of the replacement file, 1031which was output by LESSOPEN. 1032.PP 1033For example, on many Unix systems, these two scripts will allow you 1034to keep files in compressed format, but still let 1035.I less 1036view them directly: 1037.PP 1038lessopen.sh: 1039.br 1040 #! /bin/sh 1041.br 1042 case "$1" in 1043.br 1044 *.Z) uncompress -\c $1 >/tmp/less.$$ 2>/dev/null 1045.br 1046 if [ \-s /tmp/less.$$ ]; then 1047.br 1048 echo /tmp/less.$$ 1049.br 1050 else 1051.br 1052 rm \-f /tmp/less.$$ 1053.br 1054 fi 1055.br 1056 ;; 1057.br 1058 esac 1059.PP 1060lessclose.sh: 1061.br 1062 #! /bin/sh 1063.br 1064 rm $2 1065.PP 1066To use these scripts, put them both where they can be executed and 1067set LESSOPEN="lessopen.sh\ %s", and 1068LESSCLOSE="lessclose.sh\ %s\ %s". 1069More complex LESSOPEN and LESSCLOSE scripts may be written 1070to accept other types of compressed files, and so on. 1071.PP 1072It is also possible to set up an input preprocessor to 1073pipe the file data directly to 1074.I less, 1075rather than putting the data into a replacement file. 1076This avoids the need to decompress the entire file before 1077starting to view it. 1078An input preprocessor that works this way is called an input pipe. 1079An input pipe, instead of writing the name of a replacement file on 1080its standard output, 1081writes the entire contents of the replacement file on its standard output. 1082If the input pipe does not write any characters on its standard output, 1083then there is no replacement file and 1084.I less 1085uses the original file, as normal. 1086To use an input pipe, 1087make the first character in the LESSOPEN environment variable a 1088vertical bar (|) to signify that the input preprocessor is an input pipe. 1089.PP 1090For example, on many Unix systems, this script will work like the 1091previous example scripts: 1092.PP 1093lesspipe.sh: 1094.br 1095 #! /bin/sh 1096.br 1097 case "$1" in 1098.br 1099 *.Z) uncompress \-c $1 2>/dev/null 1100.br 1101 ;; 1102.br 1103 esac 1104.br 1105.PP 1106To use this script, put it where it can be executed and set 1107LESSOPEN="|lesspipe.sh %s". 1108When an input pipe is used, a LESSCLOSE postprocessor can be used, 1109but it is usually not necessary since there is no replacement file 1110to clean up. 1111In this case, the replacement file name passed to the LESSCLOSE 1112postprocessor is "\-". 1113 1114.SH "NATIONAL CHARACTER SETS" 1115There are three types of characters in the input file: 1116.IP "normal characters" 1117can be displayed directly to the screen. 1118.IP "control characters" 1119should not be displayed directly, but are expected to be found 1120in ordinary text files (such as backspace and tab). 1121.IP "binary characters" 1122should not be displayed directly and are not expected to be found 1123in text files. 1124.PP 1125A "character set" is simply a description of which characters are to 1126be considered normal, control, and binary. 1127The LESSCHARSET environment variable may be used to select a character set. 1128Possible values for LESSCHARSET are: 1129.IP ascii 1130BS, TAB, NL, CR, and formfeed are control characters, 1131all chars with values between 32 and 126 are normal, 1132and all others are binary. 1133.IP iso8859 1134Selects an ISO 8859 character set. 1135This is the same as ASCII, except characters between 160 and 255 are 1136treated as normal characters. 1137.IP latin1 1138Same as iso8859. 1139.IP latin9 1140Same as iso8859. 1141.IP dos 1142Selects a character set appropriate for MS-DOS. 1143.IP ebcdic 1144Selects an EBCDIC character set. 1145.IP IBM-1047 1146Selects an EBCDIC character set used by OS/390 Unix Services. 1147This is the EBCDIC analogue of latin1. You get similar results 1148by setting either LESSCHARSET=IBM-1047 or LC_CTYPE=en_US 1149in your environment. 1150.IP koi8-r 1151Selects a Russian character set. 1152.IP next 1153Selects a character set appropriate for NeXT computers. 1154.IP utf-8 1155Selects the UTF-8 encoding of the ISO 10646 character set. 1156UTF-8 is special in that it supports multi-byte characters in the input file. 1157It is the only character set that supports multi-byte characters. 1158.IP windows 1159Selects a character set appropriate for Microsoft Windows (cp 1251). 1160.PP 1161In special cases, it may be desired to tailor 1162.I less 1163to use a character set other than the ones definable by LESSCHARSET. 1164In this case, the environment variable LESSCHARDEF can be used 1165to define a character set. 1166It should be set to a string where each character in the string represents 1167one character in the character set. 1168The character "." is used for a normal character, "c" for control, 1169and "b" for binary. 1170A decimal number may be used for repetition. 1171For example, "bccc4b." would mean character 0 is binary, 11721, 2 and 3 are control, 4, 5, 6 and 7 are binary, and 8 is normal. 1173All characters after the last are taken to be the same as the last, 1174so characters 9 through 255 would be normal. 1175(This is an example, and does not necessarily 1176represent any real character set.) 1177.PP 1178This table shows the value of LESSCHARDEF which is equivalent 1179to each of the possible values for LESSCHARSET: 1180.sp 1181 ascii\ 8bcccbcc18b95.b 1182.br 1183 dos\ \ \ 8bcccbcc12bc5b95.b. 1184.br 1185 ebcdic 5bc6bcc7bcc41b.9b7.9b5.b..8b6.10b6.b9.7b 1186.br 1187 \ \ \ \ \ \ 9.8b8.17b3.3b9.7b9.8b8.6b10.b.b.b. 1188.br 1189 IBM-1047 4cbcbc3b9cbccbccbb4c6bcc5b3cbbc4bc4bccbc 1190.br 1191 \ \ \ \ \ \ 191.b 1192.br 1193 iso8859 8bcccbcc18b95.33b. 1194.br 1195 koi8-r 8bcccbcc18b95.b128. 1196.br 1197 latin1 8bcccbcc18b95.33b. 1198.br 1199 next\ \ 8bcccbcc18b95.bb125.bb 1200.PP 1201If neither LESSCHARSET nor LESSCHARDEF is set, 1202but any of the strings "UTF-8", "UTF8", "utf-8" or "utf8" 1203is found in the LC_ALL, LC_TYPE or LANG 1204environment variables, then the default character set is utf-8. 1205.PP 1206If that string is not found, but your system supports the 1207.I setlocale 1208interface, 1209.I less 1210will use setlocale to determine the character set. 1211setlocale is controlled by setting the LANG or LC_CTYPE environment 1212variables. 1213.PP 1214Finally, if the 1215.I setlocale 1216interface is also not available, the default character set is latin1. 1217.PP 1218Control and binary characters are displayed in standout (reverse video). 1219Each such character is displayed in caret notation if possible 1220(e.g. ^A for control-A). Caret notation is used only if 1221inverting the 0100 bit results in a normal printable character. 1222Otherwise, the character is displayed as a hex number in angle brackets. 1223This format can be changed by 1224setting the LESSBINFMT environment variable. 1225LESSBINFMT may begin with a "*" and one character to select 1226the display attribute: 1227"*k" is blinking, "*d" is bold, "*u" is underlined, "*s" is standout, 1228and "*n" is normal. 1229If LESSBINFMT does not begin with a "*", normal attribute is assumed. 1230The remainder of LESSBINFMT is a string which may include one 1231printf-style escape sequence (a % followed by x, X, o, d, etc.). 1232For example, if LESSBINFMT is "*u[%x]", binary characters 1233are displayed in underlined hexadecimal surrounded by brackets. 1234The default if no LESSBINFMT is specified is "*s<%X>". 1235The default if no LESSBINFMT is specified is "*s<%02X>". 1236Warning: the result of expanding the character via LESSBINFMT must 1237be less than 31 characters. 1238.PP 1239When the character set is utf-8, the LESSUTFBINFMT environment variable 1240acts similarly to LESSBINFMT but it applies to Unicode code points 1241that were successfully decoded but are unsuitable for display (e.g., 1242unassigned code points). 1243Its default value is "<U+%04lX>". 1244Note that LESSUTFBINFMT and LESSBINFMT share their display attribute 1245setting ("*x") so specifying one will affect both; 1246LESSUTFBINFMT is read after LESSBINFMT so its setting, if any, 1247will have priority. 1248Problematic octets in a UTF-8 file (octets of a truncated sequence, 1249octets of a complete but non-shortest form sequence, illegal octets, 1250and stray trailing octets) 1251are displayed individually using LESSBINFMT so as to facilitate diagnostic 1252of how the UTF-8 file is ill-formed. 1253 1254.SH "PROMPTS" 1255The \-P option allows you to tailor the prompt to your preference. 1256The string given to the \-P option replaces the specified prompt string. 1257Certain characters in the string are interpreted specially. 1258The prompt mechanism is rather complicated to provide flexibility, 1259but the ordinary user need not understand the details of constructing 1260personalized prompt strings. 1261.sp 1262A percent sign followed by a single character is expanded 1263according to what the following character is: 1264.IP "%b\fIX\fP" 1265Replaced by the byte offset into the current input file. 1266The b is followed by a single character (shown as \fIX\fP above) 1267which specifies the line whose byte offset is to be used. 1268If the character is a "t", the byte offset of the top line in the 1269display is used, 1270an "m" means use the middle line, 1271a "b" means use the bottom line, 1272a "B" means use the line just after the bottom line, 1273and a "j" means use the "target" line, as specified by the \-j option. 1274.IP "%B" 1275Replaced by the size of the current input file. 1276.IP "%c" 1277Replaced by the column number of the text appearing in the first 1278column of the screen. 1279.IP "%d\fIX\fP" 1280Replaced by the page number of a line in the input file. 1281The line to be used is determined by the \fIX\fP, as with the %b option. 1282.IP "%D" 1283Replaced by the number of pages in the input file, 1284or equivalently, the page number of the last line in the input file. 1285.IP "%E" 1286Replaced by the name of the editor (from the VISUAL environment variable, 1287or the EDITOR environment variable if VISUAL is not defined). 1288See the discussion of the LESSEDIT feature below. 1289.IP "%f" 1290Replaced by the name of the current input file. 1291.IP "%i" 1292Replaced by the index of the current file in the list of 1293input files. 1294.IP "%l\fIX\fP" 1295Replaced by the line number of a line in the input file. 1296The line to be used is determined by the \fIX\fP, as with the %b option. 1297.IP "%L" 1298Replaced by the line number of the last line in the input file. 1299.IP "%m" 1300Replaced by the total number of input files. 1301.IP "%p\fIX\fP" 1302Replaced by the percent into the current input file, based on byte offsets. 1303The line used is determined by the \fIX\fP as with the %b option. 1304.IP "%P\fIX\fP" 1305Replaced by the percent into the current input file, based on line numbers. 1306The line used is determined by the \fIX\fP as with the %b option. 1307.IP "%s" 1308Same as %B. 1309.IP "%t" 1310Causes any trailing spaces to be removed. 1311Usually used at the end of the string, but may appear anywhere. 1312.IP "%x" 1313Replaced by the name of the next input file in the list. 1314.PP 1315If any item is unknown (for example, the file size if input 1316is a pipe), a question mark is printed instead. 1317.PP 1318The format of the prompt string can be changed 1319depending on certain conditions. 1320A question mark followed by a single character acts like an "IF": 1321depending on the following character, a condition is evaluated. 1322If the condition is true, any characters following the question mark 1323and condition character, up to a period, are included in the prompt. 1324If the condition is false, such characters are not included. 1325A colon appearing between the question mark and the 1326period can be used to establish an "ELSE": any characters between 1327the colon and the period are included in the string if and only if 1328the IF condition is false. 1329Condition characters (which follow a question mark) may be: 1330.IP "?a" 1331True if any characters have been included in the prompt so far. 1332.IP "?b\fIX\fP" 1333True if the byte offset of the specified line is known. 1334.IP "?B" 1335True if the size of current input file is known. 1336.IP "?c" 1337True if the text is horizontally shifted (%c is not zero). 1338.IP "?d\fIX\fP" 1339True if the page number of the specified line is known. 1340.IP "?e" 1341True if at end-of-file. 1342.IP "?f" 1343True if there is an input filename 1344(that is, if input is not a pipe). 1345.IP "?l\fIX\fP" 1346True if the line number of the specified line is known. 1347.IP "?L" 1348True if the line number of the last line in the file is known. 1349.IP "?m" 1350True if there is more than one input file. 1351.IP "?n" 1352True if this is the first prompt in a new input file. 1353.IP "?p\fIX\fP" 1354True if the percent into the current input file, based on byte offsets, 1355of the specified line is known. 1356.IP "?P\fIX\fP" 1357True if the percent into the current input file, based on line numbers, 1358of the specified line is known. 1359.IP "?s" 1360Same as "?B". 1361.IP "?x" 1362True if there is a next input file 1363(that is, if the current input file is not the last one). 1364.PP 1365Any characters other than the special ones 1366(question mark, colon, period, percent, and backslash) 1367become literally part of the prompt. 1368Any of the special characters may be included in the prompt literally 1369by preceding it with a backslash. 1370.PP 1371Some examples: 1372.sp 1373?f%f:Standard input. 1374.sp 1375This prompt prints the filename, if known; 1376otherwise the string "Standard input". 1377.sp 1378?f%f .?ltLine %lt:?pt%pt\e%:?btByte %bt:-... 1379.sp 1380This prompt would print the filename, if known. 1381The filename is followed by the line number, if known, 1382otherwise the percent if known, otherwise the byte offset if known. 1383Otherwise, a dash is printed. 1384Notice how each question mark has a matching period, 1385and how the % after the %pt 1386is included literally by escaping it with a backslash. 1387.sp 1388?n?f%f\ .?m(file\ %i\ of\ %m)\ ..?e(END)\ ?x-\ Next\e:\ %x..%t 1389.sp 1390This prints the filename if this is the first prompt in a file, 1391followed by the "file N of N" message if there is more 1392than one input file. 1393Then, if we are at end-of-file, the string "(END)" is printed 1394followed by the name of the next file, if there is one. 1395Finally, any trailing spaces are truncated. 1396This is the default prompt. 1397For reference, here are the defaults for 1398the other two prompts (\-m and \-M respectively). 1399Each is broken into two lines here for readability only. 1400.nf 1401.sp 1402?n?f%f\ .?m(file\ %i\ of\ %m)\ ..?e(END)\ ?x-\ Next\e:\ %x.: 1403 ?pB%pB\e%:byte\ %bB?s/%s...%t 1404.sp 1405?f%f\ .?n?m(file\ %i\ of\ %m)\ ..?ltlines\ %lt-%lb?L/%L.\ : 1406 byte\ %bB?s/%s.\ .?e(END)\ ?x-\ Next\e:\ %x.:?pB%pB\e%..%t 1407.sp 1408.fi 1409And here is the default message produced by the = command: 1410.nf 1411.sp 1412?f%f\ .?m(file\ %i\ of\ %m)\ .?ltlines\ %lt-%lb?L/%L.\ . 1413 byte\ %bB?s/%s.\ ?e(END)\ :?pB%pB\e%..%t 1414.fi 1415.PP 1416The prompt expansion features are also used for another purpose: 1417if an environment variable LESSEDIT is defined, it is used 1418as the command to be executed when the v command is invoked. 1419The LESSEDIT string is expanded in the same way as the prompt strings. 1420The default value for LESSEDIT is: 1421.nf 1422.sp 1423 %E\ ?lm+%lm.\ %f 1424.sp 1425.fi 1426Note that this expands to the editor name, followed by a + and the 1427line number, followed by the file name. 1428If your editor does not accept the "+linenumber" syntax, or has other 1429differences in invocation syntax, the LESSEDIT variable can be 1430changed to modify this default. 1431 1432.SH SECURITY 1433When the environment variable LESSSECURE is set to 1, 1434.I less 1435runs in a "secure" mode. 1436This means these features are disabled: 1437.RS 1438.IP "!" 1439the shell command 1440.IP "|" 1441the pipe command 1442.IP ":e" 1443the examine command. 1444.IP "v" 1445the editing command 1446.IP "s \-o" 1447log files 1448.IP "\-k" 1449use of lesskey files 1450.IP "\-t" 1451use of tags files 1452.IP " " 1453metacharacters in filenames, such as * 1454.IP " " 1455filename completion (TAB, ^L) 1456.RE 1457.PP 1458Less can also be compiled to be permanently in "secure" mode. 1459 1460.SH "COMPATIBILITY WITH MORE" 1461If the environment variable LESS_IS_MORE is set to 1, 1462or if the program is invoked via a file link named "more", 1463.I less 1464behaves (mostly) in conformance with the POSIX "more" command specification. 1465In this mode, less behaves differently in these ways: 1466.PP 1467The \-e option works differently. 1468If the \-e option is not set, 1469.I less 1470behaves as if the \-E option were set. 1471If the \-e option is set, 1472.I less 1473behaves as if the \-e and \-F options were set. 1474.PP 1475The \-m option works differently. 1476If the \-m option is not set, the medium prompt is used, 1477and it is prefixed with the string "--More--". 1478If the \-m option is set, the short prompt is used. 1479.PP 1480The \-n option acts like the \-z option. 1481The normal behavior of the \-n option is unavailable in this mode. 1482.PP 1483The parameter to the \-p option is taken to be a 1484.I less 1485command rather than a search pattern. 1486.PP 1487The LESS environment variable is ignored, 1488and the MORE environment variable is used in its place. 1489 1490.SH "ENVIRONMENT VARIABLES" 1491Environment variables may be specified either in the system environment 1492as usual, or in a 1493.I lesskey 1494(1) file. 1495If environment variables are defined in more than one place, 1496variables defined in a local lesskey file take precedence over 1497variables defined in the system environment, which take precedence 1498over variables defined in the system-wide lesskey file. 1499.IP COLUMNS 1500Sets the number of columns on the screen. 1501Takes precedence over the number of columns specified by the TERM variable. 1502(But if you have a windowing system which supports TIOCGWINSZ or WIOCGETD, 1503the window system's idea of the screen size takes precedence over the 1504LINES and COLUMNS environment variables.) 1505.IP EDITOR 1506The name of the editor (used for the v command). 1507.IP HOME 1508Name of the user's home directory 1509(used to find a lesskey file on Unix and OS/2 systems). 1510.IP "HOMEDRIVE, HOMEPATH" 1511Concatenation of the HOMEDRIVE and HOMEPATH environment variables is 1512the name of the user's home directory if the HOME variable is not set 1513(only in the Windows version). 1514.IP INIT 1515Name of the user's init directory (used to find a lesskey file on OS/2 systems). 1516.IP LANG 1517Language for determining the character set. 1518.IP LC_CTYPE 1519Language for determining the character set. 1520.IP LESS 1521Options which are passed to 1522.I less 1523automatically. 1524.IP LESSANSIENDCHARS 1525Characters which may end an ANSI color escape sequence 1526(default "m"). 1527.IP LESSANSIMIDCHARS 1528Characters which may appear between the ESC character and the 1529end character in an ANSI color escape sequence 1530(default "0123456789;[?!"'#%()*+\ ". 1531.IP LESSBINFMT 1532Format for displaying non-printable, non-control characters. 1533.IP LESSCHARDEF 1534Defines a character set. 1535.IP LESSCHARSET 1536Selects a predefined character set. 1537.IP LESSCLOSE 1538Command line to invoke the (optional) input-postprocessor. 1539.IP LESSECHO 1540Name of the lessecho program (default "lessecho"). 1541The lessecho program is needed to expand metacharacters, such as * and ?, 1542in filenames on Unix systems. 1543.IP LESSEDIT 1544Editor prototype string (used for the v command). 1545See discussion under PROMPTS. 1546.IP LESSGLOBALTAGS 1547Name of the command used by the \-t option to find global tags. 1548Normally should be set to "global" if your system has the 1549.I global 1550(1) command. If not set, global tags are not used. 1551.IP LESSHISTFILE 1552Name of the history file used to remember search commands and 1553shell commands between invocations of 1554.I less. 1555If set to "\-" or "/dev/null", a history file is not used. 1556The default is "$HOME/.lesshst" on Unix systems, "$HOME/_lesshst" on 1557DOS and Windows systems, or "$HOME/lesshst.ini" or "$INIT/lesshst.ini" 1558on OS/2 systems. 1559.IP LESSHISTSIZE 1560The maximum number of commands to save in the history file. 1561The default is 100. 1562.IP LESSKEY 1563Name of the default lesskey(1) file. 1564.IP LESSKEY_SYSTEM 1565Name of the default system-wide lesskey(1) file. 1566.IP LESSMETACHARS 1567List of characters which are considered "metacharacters" by the shell. 1568.IP LESSMETAESCAPE 1569Prefix which less will add before each metacharacter in a 1570command sent to the shell. 1571If LESSMETAESCAPE is an empty string, commands containing 1572metacharacters will not be passed to the shell. 1573.IP LESSOPEN 1574Command line to invoke the (optional) input-preprocessor. 1575.IP LESSSECURE 1576Runs less in "secure" mode. 1577See discussion under SECURITY. 1578.IP LESSSEPARATOR 1579String to be appended to a directory name in filename completion. 1580.IP LESSUTFBINFMT 1581Format for displaying non-printable Unicode code points. 1582.IP LESS_IS_MORE 1583Emulate the 1584.I more 1585(1) command. 1586.IP LINES 1587Sets the number of lines on the screen. 1588Takes precedence over the number of lines specified by the TERM variable. 1589(But if you have a windowing system which supports TIOCGWINSZ or WIOCGETD, 1590the window system's idea of the screen size takes precedence over the 1591LINES and COLUMNS environment variables.) 1592.IP PATH 1593User's search path (used to find a lesskey file 1594on MS-DOS and OS/2 systems). 1595.IP SHELL 1596The shell used to execute the ! command, as well as to expand filenames. 1597.IP TERM 1598The type of terminal on which 1599.I less 1600is being run. 1601.IP VISUAL 1602The name of the editor (used for the v command). 1603 1604.SH "SEE ALSO" 1605lesskey(1) 1606 1607.SH WARNINGS 1608The = command and prompts (unless changed by \-P) 1609report the line numbers of the lines at the top and bottom of the screen, 1610but the byte and percent of the line after the one at the bottom of the screen. 1611.PP 1612On certain older terminals (the so-called "magic cookie" terminals), 1613search highlighting will cause an erroneous display. 1614On such terminals, search highlighting is disabled by default 1615to avoid possible problems. 1616.PP 1617When searching in a binary file, text which follows a null byte 1618may not be found. 1619This problem does not occur when searching with regular expressions turned 1620off via ^R, and also does not occur when 1621.I less 1622is compiled to use the PCRE regular expression library. 1623.PP 1624In certain cases, when search highlighting is enabled and 1625a search pattern begins with a ^, 1626more text than the matching string may be highlighted. 1627(This problem does not occur when less is compiled to use the POSIX 1628regular expression package.) 1629.PP 1630On some systems, 1631.I setlocale 1632claims that ASCII characters 0 thru 31 are control characters 1633rather than binary characters. 1634This causes 1635.I less 1636to treat some binary files as ordinary, non-binary files. 1637To workaround this problem, set the environment variable 1638LESSCHARSET to "ascii" (or whatever character set is appropriate). 1639.PP 1640This manual is too long. 1641.PP 1642See http://www.greenwoodsoftware.com/less for the latest list of known bugs in less. 1643 1644.SH COPYRIGHT 1645Copyright (C) 1984-2007 Mark Nudelman 1646.PP 1647less is part of the GNU project and is free software. 1648You can redistribute it and/or modify it 1649under the terms of either 1650(1) the GNU General Public License as published by 1651the Free Software Foundation; or (2) the Less License. 1652See the file README in the less distribution for more details 1653regarding redistribution. 1654You should have received a copy of the GNU General Public License 1655along with the source for less; see the file COPYING. 1656If not, write to the Free Software Foundation, 59 Temple Place, 1657Suite 330, Boston, MA 02111-1307, USA. 1658You should also have received a copy of the Less License; 1659see the file LICENSE. 1660.PP 1661less is distributed in the hope that it will be useful, but 1662WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY 1663or FITNESS FOR A PARTICULAR PURPOSE. 1664See the GNU General Public License for more details. 1665 1666.SH AUTHOR 1667.PP 1668Mark Nudelman <markn@greenwoodsoftware.com> 1669.br 1670Send bug reports or comments to the above address or to 1671.br 1672bug-less@gnu.org. 1673.br 1674For more information, see the less homepage at 1675.br 1676http://www.greenwoodsoftware.com/less.
|