1Installation Instructions 2************************* 3 4Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
| 1Installation Instructions 2************************* 3 4Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
|
52006 Free Software Foundation, Inc.
| 52006, 2007, 2008, 2009 Free Software Foundation, Inc.
|
6
| 6
|
7This file is free documentation; the Free Software Foundation gives 8unlimited permission to copy, distribute and modify it.
| 7 Copying and distribution of this file, with or without modification, 8are permitted in any medium without royalty provided the copyright 9notice and this notice are preserved. This file is offered as-is, 10without warranty of any kind.
|
9 10Basic Installation 11================== 12
| 11 12Basic Installation 13================== 14
|
13Briefly, the shell commands `./configure; make; make install' should
| 15 Briefly, the shell commands `./configure; make; make install' should
|
14configure, build, and install this package. The following 15more-detailed instructions are generic; see the `README' file for
| 16configure, build, and install this package. The following 17more-detailed instructions are generic; see the `README' file for
|
16instructions specific to this package.
| 18instructions specific to this package. Some packages provide this 19`INSTALL' file but do not implement all of the features documented 20below. The lack of an optional feature in a given package is not 21necessarily a bug. More recommendations for GNU packages can be found 22in *note Makefile Conventions: (standards)Makefile Conventions.
|
17 18 The `configure' shell script attempts to guess correct values for 19various system-dependent variables used during compilation. It uses 20those values to create a `Makefile' in each directory of the package. 21It may also create one or more `.h' files containing system-dependent 22definitions. Finally, it creates a shell script `config.status' that 23you can run in the future to recreate the current configuration, and a 24file `config.log' containing compiler output (useful mainly for 25debugging `configure'). 26 27 It can also use an optional file (typically called `config.cache' 28and enabled with `--cache-file=config.cache' or simply `-C') that saves 29the results of its tests to speed up reconfiguring. Caching is 30disabled by default to prevent problems with accidental use of stale 31cache files. 32 33 If you need to do unusual things to compile the package, please try 34to figure out how `configure' could check whether to do them, and mail 35diffs or instructions to the address given in the `README' so they can 36be considered for the next release. If you are using the cache, and at 37some point `config.cache' contains results you don't want to keep, you 38may remove or edit it. 39 40 The file `configure.ac' (or `configure.in') is used to create 41`configure' by a program called `autoconf'. You need `configure.ac' if 42you want to change it or regenerate `configure' using a newer version 43of `autoconf'. 44
| 23 24 The `configure' shell script attempts to guess correct values for 25various system-dependent variables used during compilation. It uses 26those values to create a `Makefile' in each directory of the package. 27It may also create one or more `.h' files containing system-dependent 28definitions. Finally, it creates a shell script `config.status' that 29you can run in the future to recreate the current configuration, and a 30file `config.log' containing compiler output (useful mainly for 31debugging `configure'). 32 33 It can also use an optional file (typically called `config.cache' 34and enabled with `--cache-file=config.cache' or simply `-C') that saves 35the results of its tests to speed up reconfiguring. Caching is 36disabled by default to prevent problems with accidental use of stale 37cache files. 38 39 If you need to do unusual things to compile the package, please try 40to figure out how `configure' could check whether to do them, and mail 41diffs or instructions to the address given in the `README' so they can 42be considered for the next release. If you are using the cache, and at 43some point `config.cache' contains results you don't want to keep, you 44may remove or edit it. 45 46 The file `configure.ac' (or `configure.in') is used to create 47`configure' by a program called `autoconf'. You need `configure.ac' if 48you want to change it or regenerate `configure' using a newer version 49of `autoconf'. 50
|
45The simplest way to compile this package is:
| 51 The simplest way to compile this package is:
|
46 47 1. `cd' to the directory containing the package's source code and type 48 `./configure' to configure the package for your system. 49 50 Running `configure' might take a while. While running, it prints 51 some messages telling which features it is checking for. 52 53 2. Type `make' to compile the package. 54 55 3. Optionally, type `make check' to run any self-tests that come with
| 52 53 1. `cd' to the directory containing the package's source code and type 54 `./configure' to configure the package for your system. 55 56 Running `configure' might take a while. While running, it prints 57 some messages telling which features it is checking for. 58 59 2. Type `make' to compile the package. 60 61 3. Optionally, type `make check' to run any self-tests that come with
|
56 the package.
| 62 the package, generally using the just-built uninstalled binaries.
|
57 58 4. Type `make install' to install the programs and any data files and
| 63 64 4. Type `make install' to install the programs and any data files and
|
59 documentation.
| 65 documentation. When installing into a prefix owned by root, it is 66 recommended that the package be configured and built as a regular 67 user, and only the `make install' phase executed with root 68 privileges.
|
60
| 69
|
61 5. You can remove the program binaries and object files from the
| 70 5. Optionally, type `make installcheck' to repeat any self-tests, but 71 this time using the binaries in their final installed location. 72 This target does not install anything. Running this target as a 73 regular user, particularly if the prior `make install' required 74 root privileges, verifies that the installation completed 75 correctly. 76 77 6. You can remove the program binaries and object files from the
|
62 source code directory by typing `make clean'. To also remove the 63 files that `configure' created (so you can compile the package for 64 a different kind of computer), type `make distclean'. There is 65 also a `make maintainer-clean' target, but that is intended mainly 66 for the package's developers. If you use it, you may have to get 67 all sorts of other programs in order to regenerate files that came 68 with the distribution. 69
| 78 source code directory by typing `make clean'. To also remove the 79 files that `configure' created (so you can compile the package for 80 a different kind of computer), type `make distclean'. There is 81 also a `make maintainer-clean' target, but that is intended mainly 82 for the package's developers. If you use it, you may have to get 83 all sorts of other programs in order to regenerate files that came 84 with the distribution. 85
|
| 86 7. Often, you can also type `make uninstall' to remove the installed 87 files again. In practice, not all packages have tested that 88 uninstallation works correctly, even though it is required by the 89 GNU Coding Standards. 90 91 8. Some packages, particularly those that use Automake, provide `make 92 distcheck', which can by used by developers to test that all other 93 targets like `make install' and `make uninstall' work correctly. 94 This target is generally not run by end users. 95
|
70Compilers and Options 71===================== 72
| 96Compilers and Options 97===================== 98
|
73Some systems require unusual options for compilation or linking that the 74`configure' script does not know about. Run `./configure --help' for 75details on some of the pertinent environment variables.
| 99 Some systems require unusual options for compilation or linking that 100the `configure' script does not know about. Run `./configure --help' 101for details on some of the pertinent environment variables.
|
76 77 You can give `configure' initial values for configuration parameters 78by setting variables in the command line or in the environment. Here 79is an example: 80 81 ./configure CC=c99 CFLAGS=-g LIBS=-lposix 82 83 *Note Defining Variables::, for more details. 84 85Compiling For Multiple Architectures 86==================================== 87
| 102 103 You can give `configure' initial values for configuration parameters 104by setting variables in the command line or in the environment. Here 105is an example: 106 107 ./configure CC=c99 CFLAGS=-g LIBS=-lposix 108 109 *Note Defining Variables::, for more details. 110 111Compiling For Multiple Architectures 112==================================== 113
|
88You can compile the package for more than one kind of computer at the
| 114 You can compile the package for more than one kind of computer at the
|
89same time, by placing the object files for each architecture in their 90own directory. To do this, you can use GNU `make'. `cd' to the 91directory where you want the object files and executables to go and run 92the `configure' script. `configure' automatically checks for the
| 115same time, by placing the object files for each architecture in their 116own directory. To do this, you can use GNU `make'. `cd' to the 117directory where you want the object files and executables to go and run 118the `configure' script. `configure' automatically checks for the
|
93source code in the directory that `configure' is in and in `..'.
| 119source code in the directory that `configure' is in and in `..'. This 120is known as a "VPATH" build.
|
94 95 With a non-GNU `make', it is safer to compile the package for one 96architecture at a time in the source code directory. After you have 97installed the package for one architecture, use `make distclean' before 98reconfiguring for another architecture. 99
| 121 122 With a non-GNU `make', it is safer to compile the package for one 123architecture at a time in the source code directory. After you have 124installed the package for one architecture, use `make distclean' before 125reconfiguring for another architecture. 126
|
| 127 On MacOS X 10.5 and later systems, you can create libraries and 128executables that work on multiple system types--known as "fat" or 129"universal" binaries--by specifying multiple `-arch' options to the 130compiler but only a single `-arch' option to the preprocessor. Like 131this: 132 133 ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ 134 CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ 135 CPP="gcc -E" CXXCPP="g++ -E" 136 137 This is not guaranteed to produce working output in all cases, you 138may have to build one architecture at a time and combine the results 139using the `lipo' tool if you have problems. 140
|
100Installation Names 101================== 102
| 141Installation Names 142================== 143
|
103By default, `make install' installs the package's commands under
| 144 By default, `make install' installs the package's commands under
|
104`/usr/local/bin', include files under `/usr/local/include', etc. You 105can specify an installation prefix other than `/usr/local' by giving
| 145`/usr/local/bin', include files under `/usr/local/include', etc. You 146can specify an installation prefix other than `/usr/local' by giving
|
106`configure' the option `--prefix=PREFIX'.
| 147`configure' the option `--prefix=PREFIX', where PREFIX must be an 148absolute file name.
|
107 108 You can specify separate installation prefixes for 109architecture-specific files and architecture-independent files. If you 110pass the option `--exec-prefix=PREFIX' to `configure', the package uses 111PREFIX as the prefix for installing programs and libraries. 112Documentation and other data files still use the regular prefix. 113 114 In addition, if you use an unusual directory layout you can give 115options like `--bindir=DIR' to specify different values for particular 116kinds of files. Run `configure --help' for a list of the directories
| 149 150 You can specify separate installation prefixes for 151architecture-specific files and architecture-independent files. If you 152pass the option `--exec-prefix=PREFIX' to `configure', the package uses 153PREFIX as the prefix for installing programs and libraries. 154Documentation and other data files still use the regular prefix. 155 156 In addition, if you use an unusual directory layout you can give 157options like `--bindir=DIR' to specify different values for particular 158kinds of files. Run `configure --help' for a list of the directories
|
117you can set and what kinds of files go in them.
| 159you can set and what kinds of files go in them. In general, the 160default for these options is expressed in terms of `${prefix}', so that 161specifying just `--prefix' will affect all of the other directory 162specifications that were not explicitly provided.
|
118
| 163
|
119 If the package supports it, you can cause programs to be installed 120with an extra prefix or suffix on their names by giving `configure' the 121option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
| 164 The most portable way to affect installation locations is to pass the 165correct locations to `configure'; however, many packages provide one or 166both of the following shortcuts of passing variable assignments to the 167`make install' command line to change installation locations without 168having to reconfigure or recompile.
|
122
| 169
|
| 170 The first method involves providing an override variable for each 171affected directory. For example, `make install 172prefix=/alternate/directory' will choose an alternate location for all 173directory configuration variables that were expressed in terms of 174`${prefix}'. Any directories that were specified during `configure', 175but not in terms of `${prefix}', must each be overridden at install 176time for the entire installation to be relocated. The approach of 177makefile variable overrides for each directory variable is required by 178the GNU Coding Standards, and ideally causes no recompilation. 179However, some platforms have known limitations with the semantics of 180shared libraries that end up requiring recompilation when using this 181method, particularly noticeable in packages that use GNU Libtool. 182 183 The second method involves providing the `DESTDIR' variable. For 184example, `make install DESTDIR=/alternate/directory' will prepend 185`/alternate/directory' before all installation names. The approach of 186`DESTDIR' overrides is not required by the GNU Coding Standards, and 187does not work on platforms that have drive letters. On the other hand, 188it does better at avoiding recompilation issues, and works well even 189when some directory options were not specified in terms of `${prefix}' 190at `configure' time. 191
|
123Optional Features 124================= 125
| 192Optional Features 193================= 194
|
126Some packages pay attention to `--enable-FEATURE' options to
| 195 If the package supports it, you can cause programs to be installed 196with an extra prefix or suffix on their names by giving `configure' the 197option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. 198 199 Some packages pay attention to `--enable-FEATURE' options to
|
127`configure', where FEATURE indicates an optional part of the package. 128They may also pay attention to `--with-PACKAGE' options, where PACKAGE 129is something like `gnu-as' or `x' (for the X Window System). The 130`README' should mention any `--enable-' and `--with-' options that the 131package recognizes. 132 133 For packages that use the X Window System, `configure' can usually 134find the X include and library files automatically, but if it doesn't, 135you can use the `configure' options `--x-includes=DIR' and 136`--x-libraries=DIR' to specify their locations. 137
| 200`configure', where FEATURE indicates an optional part of the package. 201They may also pay attention to `--with-PACKAGE' options, where PACKAGE 202is something like `gnu-as' or `x' (for the X Window System). The 203`README' should mention any `--enable-' and `--with-' options that the 204package recognizes. 205 206 For packages that use the X Window System, `configure' can usually 207find the X include and library files automatically, but if it doesn't, 208you can use the `configure' options `--x-includes=DIR' and 209`--x-libraries=DIR' to specify their locations. 210
|
| 211 Some packages offer the ability to configure how verbose the 212execution of `make' will be. For these packages, running `./configure 213--enable-silent-rules' sets the default to minimal output, which can be 214overridden with `make V=1'; while running `./configure 215--disable-silent-rules' sets the default to verbose, which can be 216overridden with `make V=0'. 217 218Particular systems 219================== 220 221 On HP-UX, the default C compiler is not ANSI C compatible. If GNU 222CC is not installed, it is recommended to use the following options in 223order to use an ANSI C compiler: 224 225 ./configure CC="cc -Ae -D_XOPEN_SOURCE=500" 226 227and if that doesn't work, install pre-built binaries of GCC for HP-UX. 228 229 On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot 230parse its `<wchar.h>' header file. The option `-nodtk' can be used as 231a workaround. If GNU CC is not installed, it is therefore recommended 232to try 233 234 ./configure CC="cc" 235 236and if that doesn't work, try 237 238 ./configure CC="cc -nodtk" 239 240 On Solaris, don't put `/usr/ucb' early in your `PATH'. This 241directory contains several dysfunctional programs; working variants of 242these programs are available in `/usr/bin'. So, if you need `/usr/ucb' 243in your `PATH', put it _after_ `/usr/bin'. 244 245 On Haiku, software installed for all users goes in `/boot/common', 246not `/usr/local'. It is recommended to use the following options: 247 248 ./configure --prefix=/boot/common 249
|
138Specifying the System Type 139========================== 140
| 250Specifying the System Type 251========================== 252
|
141There may be some features `configure' cannot figure out automatically, 142but needs to determine by the type of machine the package will run on. 143Usually, assuming the package is built to be run on the _same_ 144architectures, `configure' can figure that out, but if it prints a 145message saying it cannot guess the machine type, give it the
| 253 There may be some features `configure' cannot figure out 254automatically, but needs to determine by the type of machine the package 255will run on. Usually, assuming the package is built to be run on the 256_same_ architectures, `configure' can figure that out, but if it prints 257a message saying it cannot guess the machine type, give it the
|
146`--build=TYPE' option. TYPE can either be a short name for the system 147type, such as `sun4', or a canonical name which has the form: 148 149 CPU-COMPANY-SYSTEM 150 151where SYSTEM can have one of these forms: 152
| 258`--build=TYPE' option. TYPE can either be a short name for the system 259type, such as `sun4', or a canonical name which has the form: 260 261 CPU-COMPANY-SYSTEM 262 263where SYSTEM can have one of these forms: 264
|
153 OS KERNEL-OS
| 265 OS 266 KERNEL-OS
|
154 155 See the file `config.sub' for the possible values of each field. If 156`config.sub' isn't included in this package, then this package doesn't 157need to know the machine type. 158 159 If you are _building_ compiler tools for cross-compiling, you should 160use the option `--target=TYPE' to select the type of system they will 161produce code for. 162 163 If you want to _use_ a cross compiler, that generates code for a 164platform different from the build platform, you should specify the 165"host" platform (i.e., that on which the generated programs will 166eventually be run) with `--host=TYPE'. 167 168Sharing Defaults 169================ 170
| 267 268 See the file `config.sub' for the possible values of each field. If 269`config.sub' isn't included in this package, then this package doesn't 270need to know the machine type. 271 272 If you are _building_ compiler tools for cross-compiling, you should 273use the option `--target=TYPE' to select the type of system they will 274produce code for. 275 276 If you want to _use_ a cross compiler, that generates code for a 277platform different from the build platform, you should specify the 278"host" platform (i.e., that on which the generated programs will 279eventually be run) with `--host=TYPE'. 280 281Sharing Defaults 282================ 283
|
171If you want to set default values for `configure' scripts to share, you 172can create a site shell script called `config.site' that gives default 173values for variables like `CC', `cache_file', and `prefix'.
| 284 If you want to set default values for `configure' scripts to share, 285you can create a site shell script called `config.site' that gives 286default values for variables like `CC', `cache_file', and `prefix'.
|
174`configure' looks for `PREFIX/share/config.site' if it exists, then 175`PREFIX/etc/config.site' if it exists. Or, you can set the 176`CONFIG_SITE' environment variable to the location of the site script. 177A warning: not all `configure' scripts look for a site script. 178 179Defining Variables 180================== 181
| 287`configure' looks for `PREFIX/share/config.site' if it exists, then 288`PREFIX/etc/config.site' if it exists. Or, you can set the 289`CONFIG_SITE' environment variable to the location of the site script. 290A warning: not all `configure' scripts look for a site script. 291 292Defining Variables 293================== 294
|
182Variables not defined in a site shell script can be set in the
| 295 Variables not defined in a site shell script can be set in the
|
183environment passed to `configure'. However, some packages may run 184configure again during the build, and the customized values of these 185variables may be lost. In order to avoid this problem, you should set 186them in the `configure' command line, using `VAR=value'. For example: 187 188 ./configure CC=/usr/local2/bin/gcc 189 190causes the specified `gcc' to be used as the C compiler (unless it is 191overridden in the site shell script). 192 193Unfortunately, this technique does not work for `CONFIG_SHELL' due to 194an Autoconf bug. Until the bug is fixed you can use this workaround: 195 196 CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash 197 198`configure' Invocation 199====================== 200
| 296environment passed to `configure'. However, some packages may run 297configure again during the build, and the customized values of these 298variables may be lost. In order to avoid this problem, you should set 299them in the `configure' command line, using `VAR=value'. For example: 300 301 ./configure CC=/usr/local2/bin/gcc 302 303causes the specified `gcc' to be used as the C compiler (unless it is 304overridden in the site shell script). 305 306Unfortunately, this technique does not work for `CONFIG_SHELL' due to 307an Autoconf bug. Until the bug is fixed you can use this workaround: 308 309 CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash 310 311`configure' Invocation 312====================== 313
|
201`configure' recognizes the following options to control how it operates.
| 314 `configure' recognizes the following options to control how it 315operates.
|
202 203`--help' 204`-h'
| 316 317`--help' 318`-h'
|
205 Print a summary of the options to `configure', and exit.
| 319 Print a summary of all of the options to `configure', and exit.
|
206
| 320
|
| 321`--help=short' 322`--help=recursive' 323 Print a summary of the options unique to this package's 324 `configure', and exit. The `short' variant lists options used 325 only in the top level, while the `recursive' variant lists options 326 also present in any nested packages. 327
|
207`--version' 208`-V' 209 Print the version of Autoconf used to generate the `configure' 210 script, and exit. 211 212`--cache-file=FILE' 213 Enable the cache: use and save the results of the tests in FILE, 214 traditionally `config.cache'. FILE defaults to `/dev/null' to 215 disable caching. 216 217`--config-cache' 218`-C' 219 Alias for `--cache-file=config.cache'. 220 221`--quiet' 222`--silent' 223`-q' 224 Do not print messages saying which checks are being made. To 225 suppress all normal output, redirect it to `/dev/null' (any error 226 messages will still be shown). 227 228`--srcdir=DIR' 229 Look for the package's source code in directory DIR. Usually 230 `configure' can determine that directory automatically. 231
| 328`--version' 329`-V' 330 Print the version of Autoconf used to generate the `configure' 331 script, and exit. 332 333`--cache-file=FILE' 334 Enable the cache: use and save the results of the tests in FILE, 335 traditionally `config.cache'. FILE defaults to `/dev/null' to 336 disable caching. 337 338`--config-cache' 339`-C' 340 Alias for `--cache-file=config.cache'. 341 342`--quiet' 343`--silent' 344`-q' 345 Do not print messages saying which checks are being made. To 346 suppress all normal output, redirect it to `/dev/null' (any error 347 messages will still be shown). 348 349`--srcdir=DIR' 350 Look for the package's source code in directory DIR. Usually 351 `configure' can determine that directory automatically. 352
|
| 353`--prefix=DIR' 354 Use DIR as the installation prefix. *note Installation Names:: 355 for more details, including other options available for fine-tuning 356 the installation locations. 357 358`--no-create' 359`-n' 360 Run the configure checks, but stop before creating any output 361 files. 362
|
232`configure' also accepts some other, not widely useful, options. Run 233`configure --help' for more details. 234
| 363`configure' also accepts some other, not widely useful, options. Run 364`configure --help' for more details. 365
|