1#
2# Specific board setup for the Buffalo Airstation WZR-300HP
3#
4# The WZR-300HP has the following hardware:
5#
6# + AR7242 CPU SoC
7# + AR9280 5GHz 11n
8# + AR8136 Gigabit switch
9# + 2 m25ll128 based 16MB flash
10# + 64MB RAM
11# + uboot environment
12
| 1#
2# Specific board setup for the Buffalo Airstation WZR-300HP
3#
4# The WZR-300HP has the following hardware:
5#
6# + AR7242 CPU SoC
7# + AR9280 5GHz 11n
8# + AR8136 Gigabit switch
9# + 2 m25ll128 based 16MB flash
10# + 64MB RAM
11# + uboot environment
12
|
13# $FreeBSD: head/sys/mips/conf/WZR-300HP 271237 2014-09-07 20:27:48Z sbruno $
| 13# $FreeBSD: head/sys/mips/conf/WZR-300HP 288672 2015-10-04 22:50:37Z sbruno $
|
14
15include "AR724X_BASE"
16ident "WZR-300HP"
17hints "WZR-300HP.hints"
18
19options AR71XX_REALMEM=64*1024*1024
20
21options AR71XX_ENV_UBOOT
22
23options BOOTVERBOSE
24
25# GEOM modules
26device geom_map # to get access to the SPI flash partitions
27device geom_uncompress # compressed in-memory filesystem hackery!
28
29options ROOTDEVNAME=\"ufs:/dev/map/rootfs.uncompress\"
30
| 14
15include "AR724X_BASE"
16ident "WZR-300HP"
17hints "WZR-300HP.hints"
18
19options AR71XX_REALMEM=64*1024*1024
20
21options AR71XX_ENV_UBOOT
22
23options BOOTVERBOSE
24
25# GEOM modules
26device geom_map # to get access to the SPI flash partitions
27device geom_uncompress # compressed in-memory filesystem hackery!
28
29options ROOTDEVNAME=\"ufs:/dev/map/rootfs.uncompress\"
30
|
31# options MD_ROOT
32# options MD_ROOT_SIZE="6144"
33
| |
34options AR71XX_ATH_EEPROM # Fetch EEPROM/PCI config from flash
35options ATH_EEPROM_FIRMWARE # Use EEPROM from flash
36device firmware # Used by the above
37
38# Options required for miiproxy and mdiobus
39options ARGE_MDIO # Export an MDIO bus separate from arge
40device miiproxy # MDIO bus <-> MII PHY rendezvous
41
42device etherswitch
43device arswitch
44
| 31options AR71XX_ATH_EEPROM # Fetch EEPROM/PCI config from flash
32options ATH_EEPROM_FIRMWARE # Use EEPROM from flash
33device firmware # Used by the above
34
35# Options required for miiproxy and mdiobus
36options ARGE_MDIO # Export an MDIO bus separate from arge
37device miiproxy # MDIO bus <-> MII PHY rendezvous
38
39device etherswitch
40device arswitch
41
|
45# Enable GPIO
46device gpio
47device gpioled
48
| |
49# hwpmc
50device hwpmc_mips24k
51device hwpmc
| 42# hwpmc
43device hwpmc_mips24k
44device hwpmc
|
| 45
46# load these via modules, shrink kernel
47nodevice if_bridge
48nodevice bridgestp
49nodevice random
|
| |