1/******************************************************************************
2
3 Copyright (c) 2001-2015, Intel Corporation
4 All rights reserved.
5
6 Redistribution and use in source and binary forms, with or without
7 modification, are permitted provided that the following conditions are met:
8
9 1. Redistributions of source code must retain the above copyright notice,
10 this list of conditions and the following disclaimer.
11
12 2. Redistributions in binary form must reproduce the above copyright
13 notice, this list of conditions and the following disclaimer in the
14 documentation and/or other materials provided with the distribution.
15
16 3. Neither the name of the Intel Corporation nor the names of its
17 contributors may be used to endorse or promote products derived from
18 this software without specific prior written permission.
19
20 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
21 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23 ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
24 LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
25 CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
26 SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
27 INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
28 CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
29 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
30 POSSIBILITY OF SUCH DAMAGE.
31
32******************************************************************************/
33/*$FreeBSD: stable/11/sys/dev/ixgbe/ixgbe_x550.c 295093 2016-01-31 15:14:23Z smh $*/
34
35#include "ixgbe_x550.h"
36#include "ixgbe_x540.h"
37#include "ixgbe_type.h"
38#include "ixgbe_api.h"
39#include "ixgbe_common.h"
40#include "ixgbe_phy.h"
41
42static s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed);
43
44/**
45 * ixgbe_init_ops_X550 - Inits func ptrs and MAC type
46 * @hw: pointer to hardware structure
47 *
48 * Initialize the function pointers and assign the MAC type for X550.
49 * Does not touch the hardware.
50 **/
51s32 ixgbe_init_ops_X550(struct ixgbe_hw *hw)
52{
53 struct ixgbe_mac_info *mac = &hw->mac;
54 struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
55 s32 ret_val;
56
57 DEBUGFUNC("ixgbe_init_ops_X550");
58
59 ret_val = ixgbe_init_ops_X540(hw);
60 mac->ops.dmac_config = ixgbe_dmac_config_X550;
61 mac->ops.dmac_config_tcs = ixgbe_dmac_config_tcs_X550;
62 mac->ops.dmac_update_tcs = ixgbe_dmac_update_tcs_X550;
63 mac->ops.setup_eee = ixgbe_setup_eee_X550;
64 mac->ops.set_source_address_pruning =
65 ixgbe_set_source_address_pruning_X550;
66 mac->ops.set_ethertype_anti_spoofing =
67 ixgbe_set_ethertype_anti_spoofing_X550;
68
69 mac->ops.get_rtrup2tc = ixgbe_dcb_get_rtrup2tc_generic;
70 eeprom->ops.init_params = ixgbe_init_eeprom_params_X550;
71 eeprom->ops.calc_checksum = ixgbe_calc_eeprom_checksum_X550;
72 eeprom->ops.read = ixgbe_read_ee_hostif_X550;
73 eeprom->ops.read_buffer = ixgbe_read_ee_hostif_buffer_X550;
74 eeprom->ops.write = ixgbe_write_ee_hostif_X550;
75 eeprom->ops.write_buffer = ixgbe_write_ee_hostif_buffer_X550;
76 eeprom->ops.update_checksum = ixgbe_update_eeprom_checksum_X550;
77 eeprom->ops.validate_checksum = ixgbe_validate_eeprom_checksum_X550;
78
79 mac->ops.disable_mdd = ixgbe_disable_mdd_X550;
80 mac->ops.enable_mdd = ixgbe_enable_mdd_X550;
81 mac->ops.mdd_event = ixgbe_mdd_event_X550;
82 mac->ops.restore_mdd_vf = ixgbe_restore_mdd_vf_X550;
83 mac->ops.disable_rx = ixgbe_disable_rx_x550;
84 if (hw->device_id == IXGBE_DEV_ID_X550EM_X_10G_T) {
85 hw->mac.ops.led_on = ixgbe_led_on_t_X550em;
86 hw->mac.ops.led_off = ixgbe_led_off_t_X550em;
87 }
88 return ret_val;
89}
90
91/**
92 * ixgbe_read_cs4227 - Read CS4227 register
93 * @hw: pointer to hardware structure
94 * @reg: register number to write
95 * @value: pointer to receive value read
96 *
97 * Returns status code
98 **/
99static s32 ixgbe_read_cs4227(struct ixgbe_hw *hw, u16 reg, u16 *value)
100{
101 return ixgbe_read_i2c_combined_unlocked(hw, IXGBE_CS4227, reg, value);
102}
103
104/**
105 * ixgbe_write_cs4227 - Write CS4227 register
106 * @hw: pointer to hardware structure
107 * @reg: register number to write
108 * @value: value to write to register
109 *
110 * Returns status code
111 **/
112static s32 ixgbe_write_cs4227(struct ixgbe_hw *hw, u16 reg, u16 value)
113{
114 return ixgbe_write_i2c_combined_unlocked(hw, IXGBE_CS4227, reg, value);
115}
116
117/**
118 * ixgbe_read_pe - Read register from port expander
119 * @hw: pointer to hardware structure
120 * @reg: register number to read
121 * @value: pointer to receive read value
122 *
123 * Returns status code
124 **/
125static s32 ixgbe_read_pe(struct ixgbe_hw *hw, u8 reg, u8 *value)
126{
127 s32 status;
128
129 status = ixgbe_read_i2c_byte_unlocked(hw, reg, IXGBE_PE, value);
130 if (status != IXGBE_SUCCESS)
131 ERROR_REPORT2(IXGBE_ERROR_CAUTION,
132 "port expander access failed with %d\n", status);
133 return status;
134}
135
136/**
137 * ixgbe_write_pe - Write register to port expander
138 * @hw: pointer to hardware structure
139 * @reg: register number to write
140 * @value: value to write
141 *
142 * Returns status code
143 **/
144static s32 ixgbe_write_pe(struct ixgbe_hw *hw, u8 reg, u8 value)
145{
146 s32 status;
147
148 status = ixgbe_write_i2c_byte_unlocked(hw, reg, IXGBE_PE, value);
149 if (status != IXGBE_SUCCESS)
150 ERROR_REPORT2(IXGBE_ERROR_CAUTION,
151 "port expander access failed with %d\n", status);
152 return status;
153}
154
155/**
156 * ixgbe_reset_cs4227 - Reset CS4227 using port expander
157 * @hw: pointer to hardware structure
158 *
159 * This function assumes that the caller has acquired the proper semaphore.
160 * Returns error code
161 **/
162static s32 ixgbe_reset_cs4227(struct ixgbe_hw *hw)
163{
164 s32 status;
165 u32 retry;
166 u16 value;
167 u8 reg;
168
169 /* Trigger hard reset. */
170 status = ixgbe_read_pe(hw, IXGBE_PE_OUTPUT, ®);
171 if (status != IXGBE_SUCCESS)
172 return status;
173 reg |= IXGBE_PE_BIT1;
174 status = ixgbe_write_pe(hw, IXGBE_PE_OUTPUT, reg);
175 if (status != IXGBE_SUCCESS)
176 return status;
177
178 status = ixgbe_read_pe(hw, IXGBE_PE_CONFIG, ®);
179 if (status != IXGBE_SUCCESS)
180 return status;
181 reg &= ~IXGBE_PE_BIT1;
182 status = ixgbe_write_pe(hw, IXGBE_PE_CONFIG, reg);
183 if (status != IXGBE_SUCCESS)
184 return status;
185
186 status = ixgbe_read_pe(hw, IXGBE_PE_OUTPUT, ®);
187 if (status != IXGBE_SUCCESS)
188 return status;
189 reg &= ~IXGBE_PE_BIT1;
190 status = ixgbe_write_pe(hw, IXGBE_PE_OUTPUT, reg);
191 if (status != IXGBE_SUCCESS)
192 return status;
193
194 usec_delay(IXGBE_CS4227_RESET_HOLD);
195
196 status = ixgbe_read_pe(hw, IXGBE_PE_OUTPUT, ®);
197 if (status != IXGBE_SUCCESS)
198 return status;
199 reg |= IXGBE_PE_BIT1;
200 status = ixgbe_write_pe(hw, IXGBE_PE_OUTPUT, reg);
201 if (status != IXGBE_SUCCESS)
202 return status;
203
204 /* Wait for the reset to complete. */
205 msec_delay(IXGBE_CS4227_RESET_DELAY);
206 for (retry = 0; retry < IXGBE_CS4227_RETRIES; retry++) {
207 status = ixgbe_read_cs4227(hw, IXGBE_CS4227_EFUSE_STATUS,
208 &value);
209 if (status == IXGBE_SUCCESS &&
210 value == IXGBE_CS4227_EEPROM_LOAD_OK)
211 break;
212 msec_delay(IXGBE_CS4227_CHECK_DELAY);
213 }
214 if (retry == IXGBE_CS4227_RETRIES) {
215 ERROR_REPORT1(IXGBE_ERROR_INVALID_STATE,
216 "CS4227 reset did not complete.");
217 return IXGBE_ERR_PHY;
218 }
219
220 status = ixgbe_read_cs4227(hw, IXGBE_CS4227_EEPROM_STATUS, &value);
221 if (status != IXGBE_SUCCESS ||
222 !(value & IXGBE_CS4227_EEPROM_LOAD_OK)) {
223 ERROR_REPORT1(IXGBE_ERROR_INVALID_STATE,
224 "CS4227 EEPROM did not load successfully.");
225 return IXGBE_ERR_PHY;
226 }
227
228 return IXGBE_SUCCESS;
229}
230
231/**
232 * ixgbe_check_cs4227 - Check CS4227 and reset as needed
233 * @hw: pointer to hardware structure
234 **/
235static void ixgbe_check_cs4227(struct ixgbe_hw *hw)
236{
237 s32 status = IXGBE_SUCCESS;
238 u32 swfw_mask = hw->phy.phy_semaphore_mask;
239 u16 value = 0;
240 u8 retry;
241
242 for (retry = 0; retry < IXGBE_CS4227_RETRIES; retry++) {
243 status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask);
244 if (status != IXGBE_SUCCESS) {
245 ERROR_REPORT2(IXGBE_ERROR_CAUTION,
246 "semaphore failed with %d", status);
247 msec_delay(IXGBE_CS4227_CHECK_DELAY);
248 continue;
249 }
250
251 /* Get status of reset flow. */
252 status = ixgbe_read_cs4227(hw, IXGBE_CS4227_SCRATCH, &value);
253
254 if (status == IXGBE_SUCCESS &&
255 value == IXGBE_CS4227_RESET_COMPLETE)
256 goto out;
257
258 if (status != IXGBE_SUCCESS ||
259 value != IXGBE_CS4227_RESET_PENDING)
260 break;
261
262 /* Reset is pending. Wait and check again. */
263 hw->mac.ops.release_swfw_sync(hw, swfw_mask);
264 msec_delay(IXGBE_CS4227_CHECK_DELAY);
265 }
266
267 /* If still pending, assume other instance failed. */
268 if (retry == IXGBE_CS4227_RETRIES) {
269 status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask);
270 if (status != IXGBE_SUCCESS) {
271 ERROR_REPORT2(IXGBE_ERROR_CAUTION,
272 "semaphore failed with %d", status);
273 return;
274 }
275 }
276
277 /* Reset the CS4227. */
278 status = ixgbe_reset_cs4227(hw);
279 if (status != IXGBE_SUCCESS) {
280 ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
281 "CS4227 reset failed: %d", status);
282 goto out;
283 }
284
285 /* Reset takes so long, temporarily release semaphore in case the
286 * other driver instance is waiting for the reset indication.
287 */
288 ixgbe_write_cs4227(hw, IXGBE_CS4227_SCRATCH,
289 IXGBE_CS4227_RESET_PENDING);
290 hw->mac.ops.release_swfw_sync(hw, swfw_mask);
291 msec_delay(10);
292 status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask);
293 if (status != IXGBE_SUCCESS) {
294 ERROR_REPORT2(IXGBE_ERROR_CAUTION,
295 "semaphore failed with %d", status);
296 return;
297 }
298
299 /* Record completion for next time. */
300 status = ixgbe_write_cs4227(hw, IXGBE_CS4227_SCRATCH,
301 IXGBE_CS4227_RESET_COMPLETE);
302
303out:
304 hw->mac.ops.release_swfw_sync(hw, swfw_mask);
305 msec_delay(hw->eeprom.semaphore_delay);
306}
307
308/**
309 * ixgbe_setup_mux_ctl - Setup ESDP register for I2C mux control
310 * @hw: pointer to hardware structure
311 **/
312static void ixgbe_setup_mux_ctl(struct ixgbe_hw *hw)
313{
314 u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
315
316 if (hw->bus.lan_id) {
317 esdp &= ~(IXGBE_ESDP_SDP1_NATIVE | IXGBE_ESDP_SDP1);
318 esdp |= IXGBE_ESDP_SDP1_DIR;
319 }
320 esdp &= ~(IXGBE_ESDP_SDP0_NATIVE | IXGBE_ESDP_SDP0_DIR);
321 IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
322 IXGBE_WRITE_FLUSH(hw);
323}
324
325/**
326 * ixgbe_identify_phy_x550em - Get PHY type based on device id
327 * @hw: pointer to hardware structure
328 *
329 * Returns error code
330 */
331static s32 ixgbe_identify_phy_x550em(struct ixgbe_hw *hw)
332{
333 switch (hw->device_id) {
334 case IXGBE_DEV_ID_X550EM_X_SFP:
335 /* set up for CS4227 usage */
336 hw->phy.phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM;
337 ixgbe_setup_mux_ctl(hw);
338 ixgbe_check_cs4227(hw);
339
340 return ixgbe_identify_module_generic(hw);
341 break;
342 case IXGBE_DEV_ID_X550EM_X_KX4:
343 hw->phy.type = ixgbe_phy_x550em_kx4;
344 break;
345 case IXGBE_DEV_ID_X550EM_X_KR:
346 hw->phy.type = ixgbe_phy_x550em_kr;
347 break;
348 case IXGBE_DEV_ID_X550EM_X_1G_T:
349 case IXGBE_DEV_ID_X550EM_X_10G_T:
350 return ixgbe_identify_phy_generic(hw);
351 default:
352 break;
353 }
354 return IXGBE_SUCCESS;
355}
356
357static s32 ixgbe_read_phy_reg_x550em(struct ixgbe_hw *hw, u32 reg_addr,
358 u32 device_type, u16 *phy_data)
359{
360 UNREFERENCED_4PARAMETER(*hw, reg_addr, device_type, *phy_data);
361 return IXGBE_NOT_IMPLEMENTED;
362}
363
364static s32 ixgbe_write_phy_reg_x550em(struct ixgbe_hw *hw, u32 reg_addr,
365 u32 device_type, u16 phy_data)
366{
367 UNREFERENCED_4PARAMETER(*hw, reg_addr, device_type, phy_data);
368 return IXGBE_NOT_IMPLEMENTED;
369}
370
371/**
372* ixgbe_init_ops_X550EM - Inits func ptrs and MAC type
373* @hw: pointer to hardware structure
374*
375* Initialize the function pointers and for MAC type X550EM.
376* Does not touch the hardware.
377**/
378s32 ixgbe_init_ops_X550EM(struct ixgbe_hw *hw)
379{
380 struct ixgbe_mac_info *mac = &hw->mac;
381 struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
382 struct ixgbe_phy_info *phy = &hw->phy;
383 s32 ret_val;
384
385 DEBUGFUNC("ixgbe_init_ops_X550EM");
386
387 /* Similar to X550 so start there. */
388 ret_val = ixgbe_init_ops_X550(hw);
389
390 /* Since this function eventually calls
391 * ixgbe_init_ops_540 by design, we are setting
392 * the pointers to NULL explicitly here to overwrite
393 * the values being set in the x540 function.
394 */
395
396 /* FCOE not supported in x550EM */
397 mac->ops.get_san_mac_addr = NULL;
398 mac->ops.set_san_mac_addr = NULL;
399 mac->ops.get_wwn_prefix = NULL;
400 mac->ops.get_fcoe_boot_status = NULL;
401
402 /* IPsec not supported in x550EM */
403 mac->ops.disable_sec_rx_path = NULL;
404 mac->ops.enable_sec_rx_path = NULL;
405
406 /* AUTOC register is not present in x550EM. */
407 mac->ops.prot_autoc_read = NULL;
408 mac->ops.prot_autoc_write = NULL;
409
410 /* X550EM bus type is internal*/
411 hw->bus.type = ixgbe_bus_type_internal;
412 mac->ops.get_bus_info = ixgbe_get_bus_info_X550em;
413
414 if (hw->mac.type == ixgbe_mac_X550EM_x) {
415 mac->ops.read_iosf_sb_reg = ixgbe_read_iosf_sb_reg_x550;
416 mac->ops.write_iosf_sb_reg = ixgbe_write_iosf_sb_reg_x550;
417 }
418
419 mac->ops.get_media_type = ixgbe_get_media_type_X550em;
420 mac->ops.setup_sfp = ixgbe_setup_sfp_modules_X550em;
421 mac->ops.get_link_capabilities = ixgbe_get_link_capabilities_X550em;
422 mac->ops.reset_hw = ixgbe_reset_hw_X550em;
423 mac->ops.get_supported_physical_layer =
424 ixgbe_get_supported_physical_layer_X550em;
425
426 if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper)
427 mac->ops.setup_fc = ixgbe_setup_fc_generic;
428 else
429 mac->ops.setup_fc = ixgbe_setup_fc_X550em;
430
431 mac->ops.acquire_swfw_sync = ixgbe_acquire_swfw_sync_X550em;
432 mac->ops.release_swfw_sync = ixgbe_release_swfw_sync_X550em;
433
434 if (hw->device_id != IXGBE_DEV_ID_X550EM_X_KR)
435 mac->ops.setup_eee = NULL;
436
437 /* PHY */
438 phy->ops.init = ixgbe_init_phy_ops_X550em;
439 phy->ops.identify = ixgbe_identify_phy_x550em;
440 if (mac->ops.get_media_type(hw) != ixgbe_media_type_copper)
441 phy->ops.set_phy_power = NULL;
442
443
444 /* EEPROM */
445 eeprom->ops.init_params = ixgbe_init_eeprom_params_X540;
446 eeprom->ops.read = ixgbe_read_ee_hostif_X550;
447 eeprom->ops.read_buffer = ixgbe_read_ee_hostif_buffer_X550;
448 eeprom->ops.write = ixgbe_write_ee_hostif_X550;
449 eeprom->ops.write_buffer = ixgbe_write_ee_hostif_buffer_X550;
450 eeprom->ops.update_checksum = ixgbe_update_eeprom_checksum_X550;
451 eeprom->ops.validate_checksum = ixgbe_validate_eeprom_checksum_X550;
452 eeprom->ops.calc_checksum = ixgbe_calc_eeprom_checksum_X550;
453
454 return ret_val;
455}
456
457/**
458 * ixgbe_dmac_config_X550
459 * @hw: pointer to hardware structure
460 *
461 * Configure DMA coalescing. If enabling dmac, dmac is activated.
462 * When disabling dmac, dmac enable dmac bit is cleared.
463 **/
464s32 ixgbe_dmac_config_X550(struct ixgbe_hw *hw)
465{
466 u32 reg, high_pri_tc;
467
468 DEBUGFUNC("ixgbe_dmac_config_X550");
469
470 /* Disable DMA coalescing before configuring */
471 reg = IXGBE_READ_REG(hw, IXGBE_DMACR);
472 reg &= ~IXGBE_DMACR_DMAC_EN;
473 IXGBE_WRITE_REG(hw, IXGBE_DMACR, reg);
474
475 /* Disable DMA Coalescing if the watchdog timer is 0 */
476 if (!hw->mac.dmac_config.watchdog_timer)
477 goto out;
478
479 ixgbe_dmac_config_tcs_X550(hw);
480
481 /* Configure DMA Coalescing Control Register */
482 reg = IXGBE_READ_REG(hw, IXGBE_DMACR);
483
484 /* Set the watchdog timer in units of 40.96 usec */
485 reg &= ~IXGBE_DMACR_DMACWT_MASK;
486 reg |= (hw->mac.dmac_config.watchdog_timer * 100) / 4096;
487
488 reg &= ~IXGBE_DMACR_HIGH_PRI_TC_MASK;
489 /* If fcoe is enabled, set high priority traffic class */
490 if (hw->mac.dmac_config.fcoe_en) {
491 high_pri_tc = 1 << hw->mac.dmac_config.fcoe_tc;
492 reg |= ((high_pri_tc << IXGBE_DMACR_HIGH_PRI_TC_SHIFT) &
493 IXGBE_DMACR_HIGH_PRI_TC_MASK);
494 }
495 reg |= IXGBE_DMACR_EN_MNG_IND;
496
497 /* Enable DMA coalescing after configuration */
498 reg |= IXGBE_DMACR_DMAC_EN;
499 IXGBE_WRITE_REG(hw, IXGBE_DMACR, reg);
500
501out:
502 return IXGBE_SUCCESS;
503}
504
505/**
506 * ixgbe_dmac_config_tcs_X550
507 * @hw: pointer to hardware structure
508 *
509 * Configure DMA coalescing threshold per TC. The dmac enable bit must
510 * be cleared before configuring.
511 **/
512s32 ixgbe_dmac_config_tcs_X550(struct ixgbe_hw *hw)
513{
514 u32 tc, reg, pb_headroom, rx_pb_size, maxframe_size_kb;
515
516 DEBUGFUNC("ixgbe_dmac_config_tcs_X550");
517
518 /* Configure DMA coalescing enabled */
519 switch (hw->mac.dmac_config.link_speed) {
520 case IXGBE_LINK_SPEED_100_FULL:
521 pb_headroom = IXGBE_DMACRXT_100M;
522 break;
523 case IXGBE_LINK_SPEED_1GB_FULL:
524 pb_headroom = IXGBE_DMACRXT_1G;
525 break;
526 default:
527 pb_headroom = IXGBE_DMACRXT_10G;
528 break;
529 }
530
531 maxframe_size_kb = ((IXGBE_READ_REG(hw, IXGBE_MAXFRS) >>
532 IXGBE_MHADD_MFS_SHIFT) / 1024);
533
534 /* Set the per Rx packet buffer receive threshold */
535 for (tc = 0; tc < IXGBE_DCB_MAX_TRAFFIC_CLASS; tc++) {
536 reg = IXGBE_READ_REG(hw, IXGBE_DMCTH(tc));
537 reg &= ~IXGBE_DMCTH_DMACRXT_MASK;
538
539 if (tc < hw->mac.dmac_config.num_tcs) {
540 /* Get Rx PB size */
541 rx_pb_size = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(tc));
542 rx_pb_size = (rx_pb_size & IXGBE_RXPBSIZE_MASK) >>
543 IXGBE_RXPBSIZE_SHIFT;
544
545 /* Calculate receive buffer threshold in kilobytes */
546 if (rx_pb_size > pb_headroom)
547 rx_pb_size = rx_pb_size - pb_headroom;
548 else
549 rx_pb_size = 0;
550
551 /* Minimum of MFS shall be set for DMCTH */
552 reg |= (rx_pb_size > maxframe_size_kb) ?
553 rx_pb_size : maxframe_size_kb;
554 }
555 IXGBE_WRITE_REG(hw, IXGBE_DMCTH(tc), reg);
556 }
557 return IXGBE_SUCCESS;
558}
559
560/**
561 * ixgbe_dmac_update_tcs_X550
562 * @hw: pointer to hardware structure
563 *
564 * Disables dmac, updates per TC settings, and then enables dmac.
565 **/
566s32 ixgbe_dmac_update_tcs_X550(struct ixgbe_hw *hw)
567{
568 u32 reg;
569
570 DEBUGFUNC("ixgbe_dmac_update_tcs_X550");
571
572 /* Disable DMA coalescing before configuring */
573 reg = IXGBE_READ_REG(hw, IXGBE_DMACR);
574 reg &= ~IXGBE_DMACR_DMAC_EN;
575 IXGBE_WRITE_REG(hw, IXGBE_DMACR, reg);
576
577 ixgbe_dmac_config_tcs_X550(hw);
578
579 /* Enable DMA coalescing after configuration */
580 reg = IXGBE_READ_REG(hw, IXGBE_DMACR);
581 reg |= IXGBE_DMACR_DMAC_EN;
582 IXGBE_WRITE_REG(hw, IXGBE_DMACR, reg);
583
584 return IXGBE_SUCCESS;
585}
586
587/**
588 * ixgbe_init_eeprom_params_X550 - Initialize EEPROM params
589 * @hw: pointer to hardware structure
590 *
591 * Initializes the EEPROM parameters ixgbe_eeprom_info within the
592 * ixgbe_hw struct in order to set up EEPROM access.
593 **/
594s32 ixgbe_init_eeprom_params_X550(struct ixgbe_hw *hw)
595{
596 struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
597 u32 eec;
598 u16 eeprom_size;
599
600 DEBUGFUNC("ixgbe_init_eeprom_params_X550");
601
602 if (eeprom->type == ixgbe_eeprom_uninitialized) {
603 eeprom->semaphore_delay = 10;
604 eeprom->type = ixgbe_flash;
605
606 eec = IXGBE_READ_REG(hw, IXGBE_EEC);
607 eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >>
608 IXGBE_EEC_SIZE_SHIFT);
609 eeprom->word_size = 1 << (eeprom_size +
610 IXGBE_EEPROM_WORD_SIZE_SHIFT);
611
612 DEBUGOUT2("Eeprom params: type = %d, size = %d\n",
613 eeprom->type, eeprom->word_size);
614 }
615
616 return IXGBE_SUCCESS;
617}
618
619/**
620 * ixgbe_setup_eee_X550 - Enable/disable EEE support
621 * @hw: pointer to the HW structure
622 * @enable_eee: boolean flag to enable EEE
623 *
624 * Enable/disable EEE based on enable_eee flag.
625 * Auto-negotiation must be started after BASE-T EEE bits in PHY register 7.3C
626 * are modified.
627 *
628 **/
629s32 ixgbe_setup_eee_X550(struct ixgbe_hw *hw, bool enable_eee)
630{
631 u32 eeer;
632 u16 autoneg_eee_reg;
633 u32 link_reg;
634 s32 status;
635 u32 fuse;
636
637 DEBUGFUNC("ixgbe_setup_eee_X550");
638
639 eeer = IXGBE_READ_REG(hw, IXGBE_EEER);
640 /* Enable or disable EEE per flag */
641 if (enable_eee) {
642 eeer |= (IXGBE_EEER_TX_LPI_EN | IXGBE_EEER_RX_LPI_EN);
643
644 if (hw->mac.type == ixgbe_mac_X550) {
645 /* Advertise EEE capability */
646 hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_EEE_ADVT,
647 IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_eee_reg);
648
649 autoneg_eee_reg |= (IXGBE_AUTO_NEG_10GBASE_EEE_ADVT |
650 IXGBE_AUTO_NEG_1000BASE_EEE_ADVT |
651 IXGBE_AUTO_NEG_100BASE_EEE_ADVT);
652
653 hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_EEE_ADVT,
654 IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_eee_reg);
655 } else if (hw->device_id == IXGBE_DEV_ID_X550EM_X_KR) {
656 /* Not supported on first revision. */
657 fuse = IXGBE_READ_REG(hw, IXGBE_FUSES0_GROUP(0));
658 if (!(fuse & IXGBE_FUSES0_REV1))
659 return IXGBE_SUCCESS;
660
661 status = ixgbe_read_iosf_sb_reg_x550(hw,
662 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
663 IXGBE_SB_IOSF_TARGET_KR_PHY, &link_reg);
664 if (status != IXGBE_SUCCESS)
665 return status;
666
667 link_reg |= IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KR |
668 IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KX;
669
670 /* Don't advertise FEC capability when EEE enabled. */
671 link_reg &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_FEC;
672
673 status = ixgbe_write_iosf_sb_reg_x550(hw,
674 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
675 IXGBE_SB_IOSF_TARGET_KR_PHY, link_reg);
676 if (status != IXGBE_SUCCESS)
677 return status;
678 }
679 } else {
680 eeer &= ~(IXGBE_EEER_TX_LPI_EN | IXGBE_EEER_RX_LPI_EN);
681
682 if (hw->mac.type == ixgbe_mac_X550) {
683 /* Disable advertised EEE capability */
684 hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_EEE_ADVT,
685 IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_eee_reg);
686
687 autoneg_eee_reg &= ~(IXGBE_AUTO_NEG_10GBASE_EEE_ADVT |
688 IXGBE_AUTO_NEG_1000BASE_EEE_ADVT |
689 IXGBE_AUTO_NEG_100BASE_EEE_ADVT);
690
691 hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_EEE_ADVT,
692 IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_eee_reg);
693 } else if (hw->device_id == IXGBE_DEV_ID_X550EM_X_KR) {
694 status = ixgbe_read_iosf_sb_reg_x550(hw,
695 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
696 IXGBE_SB_IOSF_TARGET_KR_PHY, &link_reg);
697 if (status != IXGBE_SUCCESS)
698 return status;
699
700 link_reg &= ~(IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KR |
701 IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KX);
702
703 /* Advertise FEC capability when EEE is disabled. */
704 link_reg |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_FEC;
705
706 status = ixgbe_write_iosf_sb_reg_x550(hw,
707 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
708 IXGBE_SB_IOSF_TARGET_KR_PHY, link_reg);
709 if (status != IXGBE_SUCCESS)
710 return status;
711 }
712 }
713 IXGBE_WRITE_REG(hw, IXGBE_EEER, eeer);
714
715 return IXGBE_SUCCESS;
716}
717
718/**
719 * ixgbe_set_source_address_pruning_X550 - Enable/Disbale source address pruning
720 * @hw: pointer to hardware structure
721 * @enable: enable or disable source address pruning
722 * @pool: Rx pool to set source address pruning for
723 **/
724void ixgbe_set_source_address_pruning_X550(struct ixgbe_hw *hw, bool enable,
725 unsigned int pool)
726{
727 u64 pfflp;
728
729 /* max rx pool is 63 */
730 if (pool > 63)
731 return;
732
733 pfflp = (u64)IXGBE_READ_REG(hw, IXGBE_PFFLPL);
734 pfflp |= (u64)IXGBE_READ_REG(hw, IXGBE_PFFLPH) << 32;
735
736 if (enable)
737 pfflp |= (1ULL << pool);
738 else
739 pfflp &= ~(1ULL << pool);
740
741 IXGBE_WRITE_REG(hw, IXGBE_PFFLPL, (u32)pfflp);
742 IXGBE_WRITE_REG(hw, IXGBE_PFFLPH, (u32)(pfflp >> 32));
743}
744
745/**
746 * ixgbe_set_ethertype_anti_spoofing_X550 - Enable/Disable Ethertype anti-spoofing
747 * @hw: pointer to hardware structure
748 * @enable: enable or disable switch for Ethertype anti-spoofing
749 * @vf: Virtual Function pool - VF Pool to set for Ethertype anti-spoofing
750 *
751 **/
752void ixgbe_set_ethertype_anti_spoofing_X550(struct ixgbe_hw *hw,
753 bool enable, int vf)
754{
755 int vf_target_reg = vf >> 3;
756 int vf_target_shift = vf % 8 + IXGBE_SPOOF_ETHERTYPEAS_SHIFT;
757 u32 pfvfspoof;
758
759 DEBUGFUNC("ixgbe_set_ethertype_anti_spoofing_X550");
760
761 pfvfspoof = IXGBE_READ_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg));
762 if (enable)
763 pfvfspoof |= (1 << vf_target_shift);
764 else
765 pfvfspoof &= ~(1 << vf_target_shift);
766
767 IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg), pfvfspoof);
768}
769
770/**
771 * ixgbe_iosf_wait - Wait for IOSF command completion
772 * @hw: pointer to hardware structure
773 * @ctrl: pointer to location to receive final IOSF control value
774 *
775 * Returns failing status on timeout
776 *
777 * Note: ctrl can be NULL if the IOSF control register value is not needed
778 **/
779static s32 ixgbe_iosf_wait(struct ixgbe_hw *hw, u32 *ctrl)
780{
781 u32 i, command = 0;
782
783 /* Check every 10 usec to see if the address cycle completed.
784 * The SB IOSF BUSY bit will clear when the operation is
785 * complete
786 */
787 for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
788 command = IXGBE_READ_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL);
789 if ((command & IXGBE_SB_IOSF_CTRL_BUSY) == 0)
790 break;
791 usec_delay(10);
792 }
793 if (ctrl)
794 *ctrl = command;
795 if (i == IXGBE_MDIO_COMMAND_TIMEOUT) {
796 ERROR_REPORT1(IXGBE_ERROR_POLLING, "Wait timed out\n");
797 return IXGBE_ERR_PHY;
798 }
799
800 return IXGBE_SUCCESS;
801}
802
803/**
804 * ixgbe_write_iosf_sb_reg_x550 - Writes a value to specified register of the IOSF
805 * device
806 * @hw: pointer to hardware structure
807 * @reg_addr: 32 bit PHY register to write
808 * @device_type: 3 bit device type
809 * @data: Data to write to the register
810 **/
811s32 ixgbe_write_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr,
812 u32 device_type, u32 data)
813{
814 u32 gssr = IXGBE_GSSR_PHY1_SM | IXGBE_GSSR_PHY0_SM;
815 u32 command, error;
816 s32 ret;
817
818 ret = ixgbe_acquire_swfw_semaphore(hw, gssr);
819 if (ret != IXGBE_SUCCESS)
820 return ret;
821
822 ret = ixgbe_iosf_wait(hw, NULL);
823 if (ret != IXGBE_SUCCESS)
824 goto out;
825
826 command = ((reg_addr << IXGBE_SB_IOSF_CTRL_ADDR_SHIFT) |
827 (device_type << IXGBE_SB_IOSF_CTRL_TARGET_SELECT_SHIFT));
828
829 /* Write IOSF control register */
830 IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL, command);
831
832 /* Write IOSF data register */
833 IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_DATA, data);
834
835 ret = ixgbe_iosf_wait(hw, &command);
836
837 if ((command & IXGBE_SB_IOSF_CTRL_RESP_STAT_MASK) != 0) {
838 error = (command & IXGBE_SB_IOSF_CTRL_CMPL_ERR_MASK) >>
839 IXGBE_SB_IOSF_CTRL_CMPL_ERR_SHIFT;
840 ERROR_REPORT2(IXGBE_ERROR_POLLING,
841 "Failed to write, error %x\n", error);
842 ret = IXGBE_ERR_PHY;
843 }
844
845out:
846 ixgbe_release_swfw_semaphore(hw, gssr);
847 return ret;
848}
849
850/**
851 * ixgbe_read_iosf_sb_reg_x550 - Writes a value to specified register of the IOSF
852 * device
853 * @hw: pointer to hardware structure
854 * @reg_addr: 32 bit PHY register to write
855 * @device_type: 3 bit device type
856 * @phy_data: Pointer to read data from the register
857 **/
858s32 ixgbe_read_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr,
859 u32 device_type, u32 *data)
860{
861 u32 gssr = IXGBE_GSSR_PHY1_SM | IXGBE_GSSR_PHY0_SM;
862 u32 command, error;
863 s32 ret;
864
865 ret = ixgbe_acquire_swfw_semaphore(hw, gssr);
866 if (ret != IXGBE_SUCCESS)
867 return ret;
868
869 ret = ixgbe_iosf_wait(hw, NULL);
870 if (ret != IXGBE_SUCCESS)
871 goto out;
872
873 command = ((reg_addr << IXGBE_SB_IOSF_CTRL_ADDR_SHIFT) |
874 (device_type << IXGBE_SB_IOSF_CTRL_TARGET_SELECT_SHIFT));
875
876 /* Write IOSF control register */
877 IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL, command);
878
879 ret = ixgbe_iosf_wait(hw, &command);
880
881 if ((command & IXGBE_SB_IOSF_CTRL_RESP_STAT_MASK) != 0) {
882 error = (command & IXGBE_SB_IOSF_CTRL_CMPL_ERR_MASK) >>
883 IXGBE_SB_IOSF_CTRL_CMPL_ERR_SHIFT;
884 ERROR_REPORT2(IXGBE_ERROR_POLLING,
885 "Failed to read, error %x\n", error);
886 ret = IXGBE_ERR_PHY;
887 }
888
889 if (ret == IXGBE_SUCCESS)
890 *data = IXGBE_READ_REG(hw, IXGBE_SB_IOSF_INDIRECT_DATA);
891
892out:
893 ixgbe_release_swfw_semaphore(hw, gssr);
894 return ret;
895}
896
897/**
898 * ixgbe_disable_mdd_X550
899 * @hw: pointer to hardware structure
900 *
901 * Disable malicious driver detection
902 **/
903void ixgbe_disable_mdd_X550(struct ixgbe_hw *hw)
904{
905 u32 reg;
906
907 DEBUGFUNC("ixgbe_disable_mdd_X550");
908
909 /* Disable MDD for TX DMA and interrupt */
910 reg = IXGBE_READ_REG(hw, IXGBE_DMATXCTL);
911 reg &= ~(IXGBE_DMATXCTL_MDP_EN | IXGBE_DMATXCTL_MBINTEN);
912 IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL, reg);
913
914 /* Disable MDD for RX and interrupt */
915 reg = IXGBE_READ_REG(hw, IXGBE_RDRXCTL);
916 reg &= ~(IXGBE_RDRXCTL_MDP_EN | IXGBE_RDRXCTL_MBINTEN);
917 IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, reg);
918}
919
920/**
921 * ixgbe_enable_mdd_X550
922 * @hw: pointer to hardware structure
923 *
924 * Enable malicious driver detection
925 **/
926void ixgbe_enable_mdd_X550(struct ixgbe_hw *hw)
927{
928 u32 reg;
929
930 DEBUGFUNC("ixgbe_enable_mdd_X550");
931
932 /* Enable MDD for TX DMA and interrupt */
933 reg = IXGBE_READ_REG(hw, IXGBE_DMATXCTL);
934 reg |= (IXGBE_DMATXCTL_MDP_EN | IXGBE_DMATXCTL_MBINTEN);
935 IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL, reg);
936
937 /* Enable MDD for RX and interrupt */
938 reg = IXGBE_READ_REG(hw, IXGBE_RDRXCTL);
939 reg |= (IXGBE_RDRXCTL_MDP_EN | IXGBE_RDRXCTL_MBINTEN);
940 IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, reg);
941}
942
943/**
944 * ixgbe_restore_mdd_vf_X550
945 * @hw: pointer to hardware structure
946 * @vf: vf index
947 *
948 * Restore VF that was disabled during malicious driver detection event
949 **/
950void ixgbe_restore_mdd_vf_X550(struct ixgbe_hw *hw, u32 vf)
951{
952 u32 idx, reg, num_qs, start_q, bitmask;
953
954 DEBUGFUNC("ixgbe_restore_mdd_vf_X550");
955
956 /* Map VF to queues */
957 reg = IXGBE_READ_REG(hw, IXGBE_MRQC);
958 switch (reg & IXGBE_MRQC_MRQE_MASK) {
959 case IXGBE_MRQC_VMDQRT8TCEN:
960 num_qs = 8; /* 16 VFs / pools */
961 bitmask = 0x000000FF;
962 break;
963 case IXGBE_MRQC_VMDQRSS32EN:
964 case IXGBE_MRQC_VMDQRT4TCEN:
965 num_qs = 4; /* 32 VFs / pools */
966 bitmask = 0x0000000F;
967 break;
968 default: /* 64 VFs / pools */
969 num_qs = 2;
970 bitmask = 0x00000003;
971 break;
972 }
973 start_q = vf * num_qs;
974
975 /* Release vf's queues by clearing WQBR_TX and WQBR_RX (RW1C) */
976 idx = start_q / 32;
977 reg = 0;
978 reg |= (bitmask << (start_q % 32));
979 IXGBE_WRITE_REG(hw, IXGBE_WQBR_TX(idx), reg);
980 IXGBE_WRITE_REG(hw, IXGBE_WQBR_RX(idx), reg);
981}
982
983/**
984 * ixgbe_mdd_event_X550
985 * @hw: pointer to hardware structure
986 * @vf_bitmap: vf bitmap of malicious vfs
987 *
988 * Handle malicious driver detection event.
989 **/
990void ixgbe_mdd_event_X550(struct ixgbe_hw *hw, u32 *vf_bitmap)
991{
992 u32 wqbr;
993 u32 i, j, reg, q, shift, vf, idx;
994
995 DEBUGFUNC("ixgbe_mdd_event_X550");
996
997 /* figure out pool size for mapping to vf's */
998 reg = IXGBE_READ_REG(hw, IXGBE_MRQC);
999 switch (reg & IXGBE_MRQC_MRQE_MASK) {
1000 case IXGBE_MRQC_VMDQRT8TCEN:
1001 shift = 3; /* 16 VFs / pools */
1002 break;
1003 case IXGBE_MRQC_VMDQRSS32EN:
1004 case IXGBE_MRQC_VMDQRT4TCEN:
1005 shift = 2; /* 32 VFs / pools */
1006 break;
1007 default:
1008 shift = 1; /* 64 VFs / pools */
1009 break;
1010 }
1011
1012 /* Read WQBR_TX and WQBR_RX and check for malicious queues */
1013 for (i = 0; i < 4; i++) {
1014 wqbr = IXGBE_READ_REG(hw, IXGBE_WQBR_TX(i));
1015 wqbr |= IXGBE_READ_REG(hw, IXGBE_WQBR_RX(i));
1016
1017 if (!wqbr)
1018 continue;
1019
1020 /* Get malicious queue */
1021 for (j = 0; j < 32 && wqbr; j++) {
1022
1023 if (!(wqbr & (1 << j)))
1024 continue;
1025
1026 /* Get queue from bitmask */
1027 q = j + (i * 32);
1028
1029 /* Map queue to vf */
1030 vf = (q >> shift);
1031
1032 /* Set vf bit in vf_bitmap */
1033 idx = vf / 32;
1034 vf_bitmap[idx] |= (1 << (vf % 32));
1035 wqbr &= ~(1 << j);
1036 }
1037 }
1038}
1039
1040/**
1041 * ixgbe_get_media_type_X550em - Get media type
1042 * @hw: pointer to hardware structure
1043 *
1044 * Returns the media type (fiber, copper, backplane)
1045 */
1046enum ixgbe_media_type ixgbe_get_media_type_X550em(struct ixgbe_hw *hw)
1047{
1048 enum ixgbe_media_type media_type;
1049
1050 DEBUGFUNC("ixgbe_get_media_type_X550em");
1051
1052 /* Detect if there is a copper PHY attached. */
1053 switch (hw->device_id) {
1054 case IXGBE_DEV_ID_X550EM_X_KR:
1055 case IXGBE_DEV_ID_X550EM_X_KX4:
1056 media_type = ixgbe_media_type_backplane;
1057 break;
1058 case IXGBE_DEV_ID_X550EM_X_SFP:
1059 media_type = ixgbe_media_type_fiber;
1060 break;
1061 case IXGBE_DEV_ID_X550EM_X_1G_T:
1062 case IXGBE_DEV_ID_X550EM_X_10G_T:
1063 media_type = ixgbe_media_type_copper;
1064 break;
1065 default:
1066 media_type = ixgbe_media_type_unknown;
1067 break;
1068 }
1069 return media_type;
1070}
1071
1072/**
1073 * ixgbe_supported_sfp_modules_X550em - Check if SFP module type is supported
1074 * @hw: pointer to hardware structure
1075 * @linear: TRUE if SFP module is linear
1076 */
1077static s32 ixgbe_supported_sfp_modules_X550em(struct ixgbe_hw *hw, bool *linear)
1078{
1079 DEBUGFUNC("ixgbe_supported_sfp_modules_X550em");
1080
1081 switch (hw->phy.sfp_type) {
1082 case ixgbe_sfp_type_not_present:
1083 return IXGBE_ERR_SFP_NOT_PRESENT;
1084 case ixgbe_sfp_type_da_cu_core0:
1085 case ixgbe_sfp_type_da_cu_core1:
1086 *linear = TRUE;
1087 break;
1088 case ixgbe_sfp_type_srlr_core0:
1089 case ixgbe_sfp_type_srlr_core1:
1090 case ixgbe_sfp_type_da_act_lmt_core0:
1091 case ixgbe_sfp_type_da_act_lmt_core1:
1092 case ixgbe_sfp_type_1g_sx_core0:
1093 case ixgbe_sfp_type_1g_sx_core1:
1094 case ixgbe_sfp_type_1g_lx_core0:
1095 case ixgbe_sfp_type_1g_lx_core1:
1096 *linear = FALSE;
1097 break;
1098 case ixgbe_sfp_type_unknown:
1099 case ixgbe_sfp_type_1g_cu_core0:
1100 case ixgbe_sfp_type_1g_cu_core1:
1101 default:
1102 return IXGBE_ERR_SFP_NOT_SUPPORTED;
1103 }
1104
1105 return IXGBE_SUCCESS;
1106}
1107
1108/**
1109 * ixgbe_identify_sfp_module_X550em - Identifies SFP modules
1110 * @hw: pointer to hardware structure
1111 *
1112 * Searches for and identifies the SFP module and assigns appropriate PHY type.
1113 **/
1114s32 ixgbe_identify_sfp_module_X550em(struct ixgbe_hw *hw)
1115{
1116 s32 status;
1117 bool linear;
1118
1119 DEBUGFUNC("ixgbe_identify_sfp_module_X550em");
1120
1121 status = ixgbe_identify_module_generic(hw);
1122
1123 if (status != IXGBE_SUCCESS)
1124 return status;
1125
1126 /* Check if SFP module is supported */
1127 status = ixgbe_supported_sfp_modules_X550em(hw, &linear);
1128
1129 return status;
1130}
1131
1132/**
1133 * ixgbe_setup_sfp_modules_X550em - Setup MAC link ops
1134 * @hw: pointer to hardware structure
1135 */
1136s32 ixgbe_setup_sfp_modules_X550em(struct ixgbe_hw *hw)
1137{
1138 s32 status;
1139 bool linear;
1140
1141 DEBUGFUNC("ixgbe_setup_sfp_modules_X550em");
1142
1143 /* Check if SFP module is supported */
1144 status = ixgbe_supported_sfp_modules_X550em(hw, &linear);
1145
1146 if (status != IXGBE_SUCCESS)
1147 return status;
1148
1149 ixgbe_init_mac_link_ops_X550em(hw);
1150 hw->phy.ops.reset = NULL;
1151
1152 return IXGBE_SUCCESS;
1153}
1154
1155/**
1156 * ixgbe_init_mac_link_ops_X550em - init mac link function pointers
1157 * @hw: pointer to hardware structure
1158 */
1159void ixgbe_init_mac_link_ops_X550em(struct ixgbe_hw *hw)
1160{
1161 struct ixgbe_mac_info *mac = &hw->mac;
1162
1163 DEBUGFUNC("ixgbe_init_mac_link_ops_X550em");
1164
1165 switch (hw->mac.ops.get_media_type(hw)) {
1166 case ixgbe_media_type_fiber:
1167 /* CS4227 does not support autoneg, so disable the laser control
1168 * functions for SFP+ fiber
1169 */
1170 mac->ops.disable_tx_laser = NULL;
1171 mac->ops.enable_tx_laser = NULL;
1172 mac->ops.flap_tx_laser = NULL;
1173 mac->ops.setup_link = ixgbe_setup_mac_link_multispeed_fiber;
1174 mac->ops.setup_mac_link = ixgbe_setup_mac_link_sfp_x550em;
1175 mac->ops.set_rate_select_speed =
1176 ixgbe_set_soft_rate_select_speed;
1177 break;
1178 case ixgbe_media_type_copper:
1179 mac->ops.setup_link = ixgbe_setup_mac_link_t_X550em;
1180 mac->ops.check_link = ixgbe_check_link_t_X550em;
1181 break;
1182 default:
1183 break;
1184 }
1185}
1186
1187/**
1188 * ixgbe_get_link_capabilities_x550em - Determines link capabilities
1189 * @hw: pointer to hardware structure
1190 * @speed: pointer to link speed
1191 * @autoneg: TRUE when autoneg or autotry is enabled
1192 */
1193s32 ixgbe_get_link_capabilities_X550em(struct ixgbe_hw *hw,
1194 ixgbe_link_speed *speed,
1195 bool *autoneg)
1196{
1197 DEBUGFUNC("ixgbe_get_link_capabilities_X550em");
1198
1199 /* SFP */
1200 if (hw->phy.media_type == ixgbe_media_type_fiber) {
1201
1202 /* CS4227 SFP must not enable auto-negotiation */
1203 *autoneg = FALSE;
1204
1205 /* Check if 1G SFP module. */
1206 if (hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
1207 hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1
1208 || hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
1209 hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1) {
1210 *speed = IXGBE_LINK_SPEED_1GB_FULL;
1211 return IXGBE_SUCCESS;
1212 }
1213
1214 /* Link capabilities are based on SFP */
1215 if (hw->phy.multispeed_fiber)
1216 *speed = IXGBE_LINK_SPEED_10GB_FULL |
1217 IXGBE_LINK_SPEED_1GB_FULL;
1218 else
1219 *speed = IXGBE_LINK_SPEED_10GB_FULL;
1220 } else {
1221 *speed = IXGBE_LINK_SPEED_10GB_FULL |
1222 IXGBE_LINK_SPEED_1GB_FULL;
1223 *autoneg = TRUE;
1224 }
1225
1226 return IXGBE_SUCCESS;
1227}
1228
1229/**
1230 * ixgbe_get_lasi_ext_t_x550em - Determime external Base T PHY interrupt cause
1231 * @hw: pointer to hardware structure
1232 * @lsc: pointer to boolean flag which indicates whether external Base T
1233 * PHY interrupt is lsc
1234 *
1235 * Determime if external Base T PHY interrupt cause is high temperature
1236 * failure alarm or link status change.
1237 *
1238 * Return IXGBE_ERR_OVERTEMP if interrupt is high temperature
1239 * failure alarm, else return PHY access status.
1240 */
1241static s32 ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw *hw, bool *lsc)
1242{
1243 u32 status;
1244 u16 reg;
1245
1246 *lsc = FALSE;
1247
1248 /* Vendor alarm triggered */
1249 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_CHIP_STD_INT_FLAG,
1250 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
1251 ®);
1252
1253 if (status != IXGBE_SUCCESS ||
1254 !(reg & IXGBE_MDIO_GLOBAL_VEN_ALM_INT_EN))
1255 return status;
1256
1257 /* Vendor Auto-Neg alarm triggered or Global alarm 1 triggered */
1258 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_FLAG,
1259 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
1260 ®);
1261
1262 if (status != IXGBE_SUCCESS ||
1263 !(reg & (IXGBE_MDIO_GLOBAL_AN_VEN_ALM_INT_EN |
1264 IXGBE_MDIO_GLOBAL_ALARM_1_INT)))
1265 return status;
1266
1267 /* Global alarm triggered */
1268 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_ALARM_1,
1269 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
1270 ®);
1271
1272 if (status != IXGBE_SUCCESS)
1273 return status;
1274
1275 /* If high temperature failure, then return over temp error and exit */
1276 if (reg & IXGBE_MDIO_GLOBAL_ALM_1_HI_TMP_FAIL) {
1277 /* power down the PHY in case the PHY FW didn't already */
1278 ixgbe_set_copper_phy_power(hw, FALSE);
1279 return IXGBE_ERR_OVERTEMP;
1280 } else if (reg & IXGBE_MDIO_GLOBAL_ALM_1_DEV_FAULT) {
1281 /* device fault alarm triggered */
1282 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_FAULT_MSG,
1283 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
1284 ®);
1285
1286 if (status != IXGBE_SUCCESS)
1287 return status;
1288
1289 /* if device fault was due to high temp alarm handle and exit */
1290 if (reg == IXGBE_MDIO_GLOBAL_FAULT_MSG_HI_TMP) {
1291 /* power down the PHY in case the PHY FW didn't */
1292 ixgbe_set_copper_phy_power(hw, FALSE);
1293 return IXGBE_ERR_OVERTEMP;
1294 }
1295 }
1296
1297 /* Vendor alarm 2 triggered */
1298 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_CHIP_STD_INT_FLAG,
1299 IXGBE_MDIO_AUTO_NEG_DEV_TYPE, ®);
1300
1301 if (status != IXGBE_SUCCESS ||
1302 !(reg & IXGBE_MDIO_GLOBAL_STD_ALM2_INT))
1303 return status;
1304
1305 /* link connect/disconnect event occurred */
1306 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM2,
1307 IXGBE_MDIO_AUTO_NEG_DEV_TYPE, ®);
1308
1309 if (status != IXGBE_SUCCESS)
1310 return status;
1311
1312 /* Indicate LSC */
1313 if (reg & IXGBE_MDIO_AUTO_NEG_VEN_LSC)
1314 *lsc = TRUE;
1315
1316 return IXGBE_SUCCESS;
1317}
1318
1319/**
1320 * ixgbe_enable_lasi_ext_t_x550em - Enable external Base T PHY interrupts
1321 * @hw: pointer to hardware structure
1322 *
1323 * Enable link status change and temperature failure alarm for the external
1324 * Base T PHY
1325 *
1326 * Returns PHY access status
1327 */
1328static s32 ixgbe_enable_lasi_ext_t_x550em(struct ixgbe_hw *hw)
1329{
1330 u32 status;
1331 u16 reg;
1332 bool lsc;
1333
1334 /* Clear interrupt flags */
1335 status = ixgbe_get_lasi_ext_t_x550em(hw, &lsc);
1336
1337 /* Enable link status change alarm */
1338 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK,
1339 IXGBE_MDIO_AUTO_NEG_DEV_TYPE, ®);
1340
1341 if (status != IXGBE_SUCCESS)
1342 return status;
1343
1344 reg |= IXGBE_MDIO_PMA_TX_VEN_LASI_INT_EN;
1345
1346 status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK,
1347 IXGBE_MDIO_AUTO_NEG_DEV_TYPE, reg);
1348
1349 if (status != IXGBE_SUCCESS)
1350 return status;
1351
1352 /* Enables high temperature failure alarm */
1353 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_MASK,
1354 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
1355 ®);
1356
1357 if (status != IXGBE_SUCCESS)
1358 return status;
1359
1360 reg |= IXGBE_MDIO_GLOBAL_INT_HI_TEMP_EN;
1361
1362 status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_MASK,
1363 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
1364 reg);
1365
1366 if (status != IXGBE_SUCCESS)
1367 return status;
1368
1369 /* Enable vendor Auto-Neg alarm and Global Interrupt Mask 1 alarm */
1370 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_MASK,
1371 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
1372 ®);
1373
1374 if (status != IXGBE_SUCCESS)
1375 return status;
1376
1377 reg |= (IXGBE_MDIO_GLOBAL_AN_VEN_ALM_INT_EN |
1378 IXGBE_MDIO_GLOBAL_ALARM_1_INT);
1379
1380 status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_MASK,
1381 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
1382 reg);
1383
1384 if (status != IXGBE_SUCCESS)
1385 return status;
1386
1387 /* Enable chip-wide vendor alarm */
1388 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_STD_MASK,
1389 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
1390 ®);
1391
1392 if (status != IXGBE_SUCCESS)
1393 return status;
1394
1395 reg |= IXGBE_MDIO_GLOBAL_VEN_ALM_INT_EN;
1396
1397 status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_STD_MASK,
1398 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
1399 reg);
1400
1401 return status;
1402}
1403
1404/**
1405 * ixgbe_setup_kr_speed_x550em - Configure the KR PHY for link speed.
1406 * @hw: pointer to hardware structure
1407 * @speed: link speed
1408 *
1409 * Configures the integrated KR PHY.
1410 **/
1411static s32 ixgbe_setup_kr_speed_x550em(struct ixgbe_hw *hw,
1412 ixgbe_link_speed speed)
1413{
1414 s32 status;
1415 u32 reg_val;
1416
1417 status = ixgbe_read_iosf_sb_reg_x550(hw,
1418 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
1419 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
1420 if (status)
1421 return status;
1422
1423 reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE;
1424 reg_val &= ~(IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KR |
1425 IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KX);
1426
1427 /* Advertise 10G support. */
1428 if (speed & IXGBE_LINK_SPEED_10GB_FULL)
1429 reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KR;
1430
1431 /* Advertise 1G support. */
1432 if (speed & IXGBE_LINK_SPEED_1GB_FULL)
1433 reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KX;
1434
1435 /* Restart auto-negotiation. */
1436 reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART;
1437 status = ixgbe_write_iosf_sb_reg_x550(hw,
1438 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
1439 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
1440
1441 return status;
1442}
1443
1444/**
1445 * ixgbe_init_phy_ops_X550em - PHY/SFP specific init
1446 * @hw: pointer to hardware structure
1447 *
1448 * Initialize any function pointers that were not able to be
1449 * set during init_shared_code because the PHY/SFP type was
1450 * not known. Perform the SFP init if necessary.
1451 */
1452s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw)
1453{
1454 struct ixgbe_phy_info *phy = &hw->phy;
1455 ixgbe_link_speed speed;
1456 s32 ret_val;
1457
1458 DEBUGFUNC("ixgbe_init_phy_ops_X550em");
1459
1460 hw->mac.ops.set_lan_id(hw);
1461
1462 if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) {
1463 phy->phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM;
1464 ixgbe_setup_mux_ctl(hw);
1465
1466 /* Save NW management interface connected on board. This is used
1467 * to determine internal PHY mode.
1468 */
1469 phy->nw_mng_if_sel = IXGBE_READ_REG(hw, IXGBE_NW_MNG_IF_SEL);
1470 if (phy->nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE) {
1471 speed = IXGBE_LINK_SPEED_10GB_FULL |
1472 IXGBE_LINK_SPEED_1GB_FULL;
1473 }
1474 phy->ops.identify_sfp = ixgbe_identify_sfp_module_X550em;
1475 }
1476
1477 /* Identify the PHY or SFP module */
1478 ret_val = phy->ops.identify(hw);
1479 if (ret_val == IXGBE_ERR_SFP_NOT_SUPPORTED)
1480 return ret_val;
1481
1482 /* Setup function pointers based on detected hardware */
1483 ixgbe_init_mac_link_ops_X550em(hw);
1484 if (phy->sfp_type != ixgbe_sfp_type_unknown)
1485 phy->ops.reset = NULL;
1486
1487 /* Set functions pointers based on phy type */
1488 switch (hw->phy.type) {
1489 case ixgbe_phy_x550em_kx4:
1490 phy->ops.setup_link = NULL;
1491 phy->ops.read_reg = ixgbe_read_phy_reg_x550em;
1492 phy->ops.write_reg = ixgbe_write_phy_reg_x550em;
1493 break;
1494 case ixgbe_phy_x550em_kr:
1495 phy->ops.setup_link = ixgbe_setup_kr_x550em;
1496 phy->ops.read_reg = ixgbe_read_phy_reg_x550em;
1497 phy->ops.write_reg = ixgbe_write_phy_reg_x550em;
1498 break;
1499 case ixgbe_phy_x550em_ext_t:
1500 /* Save NW management interface connected on board. This is used
1501 * to determine internal PHY mode
1502 */
1503 phy->nw_mng_if_sel = IXGBE_READ_REG(hw, IXGBE_NW_MNG_IF_SEL);
1504
1505 /* If internal link mode is XFI, then setup iXFI internal link,
1506 * else setup KR now.
1507 */
1508 if (!(phy->nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) {
1509 phy->ops.setup_internal_link =
1510 ixgbe_setup_internal_phy_t_x550em;
1511 } else {
1512 speed = IXGBE_LINK_SPEED_10GB_FULL |
1513 IXGBE_LINK_SPEED_1GB_FULL;
1514 ret_val = ixgbe_setup_kr_speed_x550em(hw, speed);
1515 }
1516
1517 /* setup SW LPLU only for first revision */
1518 if (!(IXGBE_FUSES0_REV1 & IXGBE_READ_REG(hw,
1519 IXGBE_FUSES0_GROUP(0))))
1520 phy->ops.enter_lplu = ixgbe_enter_lplu_t_x550em;
1521
1522 phy->ops.handle_lasi = ixgbe_handle_lasi_ext_t_x550em;
1523 phy->ops.reset = ixgbe_reset_phy_t_X550em;
1524 break;
1525 default:
1526 break;
1527 }
1528 return ret_val;
1529}
1530
1531/**
1532 * ixgbe_reset_hw_X550em - Perform hardware reset
1533 * @hw: pointer to hardware structure
1534 *
1535 * Resets the hardware by resetting the transmit and receive units, masks
1536 * and clears all interrupts, perform a PHY reset, and perform a link (MAC)
1537 * reset.
1538 */
1539s32 ixgbe_reset_hw_X550em(struct ixgbe_hw *hw)
1540{
1541 ixgbe_link_speed link_speed;
1542 s32 status;
1543 u32 ctrl = 0;
1544 u32 i;
1545 u32 hlreg0;
1546 bool link_up = FALSE;
1547
1548 DEBUGFUNC("ixgbe_reset_hw_X550em");
1549
1550 /* Call adapter stop to disable Tx/Rx and clear interrupts */
1551 status = hw->mac.ops.stop_adapter(hw);
1552 if (status != IXGBE_SUCCESS)
1553 return status;
1554
1555 /* flush pending Tx transactions */
1556 ixgbe_clear_tx_pending(hw);
1557
1558 if (hw->device_id == IXGBE_DEV_ID_X550EM_X_10G_T) {
1559 /* Config MDIO clock speed before the first MDIO PHY access */
1560 hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0);
1561 hlreg0 &= ~IXGBE_HLREG0_MDCSPD;
1562 IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0);
1563 }
1564
1565 /* PHY ops must be identified and initialized prior to reset */
1566 status = hw->phy.ops.init(hw);
1567
1568 if (status == IXGBE_ERR_SFP_NOT_SUPPORTED)
1569 return status;
1570
1571 /* start the external PHY */
1572 if (hw->phy.type == ixgbe_phy_x550em_ext_t) {
1573 status = ixgbe_init_ext_t_x550em(hw);
1574 if (status)
1575 return status;
1576 }
1577
1578 /* Setup SFP module if there is one present. */
1579 if (hw->phy.sfp_setup_needed) {
1580 status = hw->mac.ops.setup_sfp(hw);
1581 hw->phy.sfp_setup_needed = FALSE;
1582 }
1583
1584 if (status == IXGBE_ERR_SFP_NOT_SUPPORTED)
1585 return status;
1586
1587 /* Reset PHY */
1588 if (!hw->phy.reset_disable && hw->phy.ops.reset)
1589 hw->phy.ops.reset(hw);
1590
1591mac_reset_top:
1592 /* Issue global reset to the MAC. Needs to be SW reset if link is up.
1593 * If link reset is used when link is up, it might reset the PHY when
1594 * mng is using it. If link is down or the flag to force full link
1595 * reset is set, then perform link reset.
1596 */
1597 ctrl = IXGBE_CTRL_LNK_RST;
1598 if (!hw->force_full_reset) {
1599 hw->mac.ops.check_link(hw, &link_speed, &link_up, FALSE);
1600 if (link_up)
1601 ctrl = IXGBE_CTRL_RST;
1602 }
1603
1604 ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL);
1605 IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl);
1606 IXGBE_WRITE_FLUSH(hw);
1607
1608 /* Poll for reset bit to self-clear meaning reset is complete */
1609 for (i = 0; i < 10; i++) {
1610 usec_delay(1);
1611 ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
1612 if (!(ctrl & IXGBE_CTRL_RST_MASK))
1613 break;
1614 }
1615
1616 if (ctrl & IXGBE_CTRL_RST_MASK) {
1617 status = IXGBE_ERR_RESET_FAILED;
1618 DEBUGOUT("Reset polling failed to complete.\n");
1619 }
1620
1621 msec_delay(50);
1622
1623 /* Double resets are required for recovery from certain error
1624 * conditions. Between resets, it is necessary to stall to
1625 * allow time for any pending HW events to complete.
1626 */
1627 if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) {
1628 hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED;
1629 goto mac_reset_top;
1630 }
1631
1632 /* Store the permanent mac address */
1633 hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
1634
1635 /* Store MAC address from RAR0, clear receive address registers, and
1636 * clear the multicast table. Also reset num_rar_entries to 128,
1637 * since we modify this value when programming the SAN MAC address.
1638 */
1639 hw->mac.num_rar_entries = 128;
1640 hw->mac.ops.init_rx_addrs(hw);
1641
1642 if (hw->device_id == IXGBE_DEV_ID_X550EM_X_SFP)
1643 ixgbe_setup_mux_ctl(hw);
1644
1645 return status;
1646}
1647
1648/**
1649 * ixgbe_init_ext_t_x550em - Start (unstall) the external Base T PHY.
1650 * @hw: pointer to hardware structure
1651 */
1652s32 ixgbe_init_ext_t_x550em(struct ixgbe_hw *hw)
1653{
1654 u32 status;
1655 u16 reg;
1656
1657 status = hw->phy.ops.read_reg(hw,
1658 IXGBE_MDIO_TX_VENDOR_ALARMS_3,
1659 IXGBE_MDIO_PMA_PMD_DEV_TYPE,
1660 ®);
1661
1662 if (status != IXGBE_SUCCESS)
1663 return status;
1664
1665 /* If PHY FW reset completed bit is set then this is the first
1666 * SW instance after a power on so the PHY FW must be un-stalled.
1667 */
1668 if (reg & IXGBE_MDIO_TX_VENDOR_ALARMS_3_RST_MASK) {
1669 status = hw->phy.ops.read_reg(hw,
1670 IXGBE_MDIO_GLOBAL_RES_PR_10,
1671 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
1672 ®);
1673
1674 if (status != IXGBE_SUCCESS)
1675 return status;
1676
1677 reg &= ~IXGBE_MDIO_POWER_UP_STALL;
1678
1679 status = hw->phy.ops.write_reg(hw,
1680 IXGBE_MDIO_GLOBAL_RES_PR_10,
1681 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
1682 reg);
1683
1684 if (status != IXGBE_SUCCESS)
1685 return status;
1686 }
1687
1688 return status;
1689}
1690
1691/**
1692 * ixgbe_setup_kr_x550em - Configure the KR PHY.
1693 * @hw: pointer to hardware structure
1694 *
1695 * Configures the integrated KR PHY.
1696 **/
1697s32 ixgbe_setup_kr_x550em(struct ixgbe_hw *hw)
1698{
1699 return ixgbe_setup_kr_speed_x550em(hw, hw->phy.autoneg_advertised);
1700}
1701
1702/**
1703 * ixgbe_setup_mac_link_sfp_x550em - Setup internal/external the PHY for SFP
1704 * @hw: pointer to hardware structure
1705 *
1706 * Configure the external PHY and the integrated KR PHY for SFP support.
1707 **/
1708s32 ixgbe_setup_mac_link_sfp_x550em(struct ixgbe_hw *hw,
1709 ixgbe_link_speed speed,
1710 bool autoneg_wait_to_complete)
1711{
1712 s32 ret_val;
1713 u16 reg_slice, reg_val;
1714 bool setup_linear = FALSE;
1715 UNREFERENCED_1PARAMETER(autoneg_wait_to_complete);
1716
1717 /* Check if SFP module is supported and linear */
1718 ret_val = ixgbe_supported_sfp_modules_X550em(hw, &setup_linear);
1719
1720 /* If no SFP module present, then return success. Return success since
1721 * there is no reason to configure CS4227 and SFP not present error is
1722 * not excepted in the setup MAC link flow.
1723 */
1724 if (ret_val == IXGBE_ERR_SFP_NOT_PRESENT)
1725 return IXGBE_SUCCESS;
1726
1727 if (ret_val != IXGBE_SUCCESS)
1728 return ret_val;
1729
1730 if (!(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) {
1731 /* Configure CS4227 LINE side to 10G SR. */
1732 reg_slice = IXGBE_CS4227_LINE_SPARE22_MSB +
1733 (hw->bus.lan_id << 12);
1734 reg_val = IXGBE_CS4227_SPEED_10G;
1735 ret_val = ixgbe_write_i2c_combined(hw, IXGBE_CS4227, reg_slice,
1736 reg_val);
1737
1738 reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB +
1739 (hw->bus.lan_id << 12);
1740 reg_val = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1;
1741 ret_val = ixgbe_write_i2c_combined(hw, IXGBE_CS4227, reg_slice,
1742 reg_val);
1743
1744 /* Configure CS4227 for HOST connection rate then type. */
1745 reg_slice = IXGBE_CS4227_HOST_SPARE22_MSB +
1746 (hw->bus.lan_id << 12);
1747 reg_val = (speed & IXGBE_LINK_SPEED_10GB_FULL) ?
1748 IXGBE_CS4227_SPEED_10G : IXGBE_CS4227_SPEED_1G;
1749 ret_val = ixgbe_write_i2c_combined(hw, IXGBE_CS4227, reg_slice,
1750 reg_val);
1751
1752 reg_slice = IXGBE_CS4227_HOST_SPARE24_LSB +
1753 (hw->bus.lan_id << 12);
1754 if (setup_linear)
1755 reg_val = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1;
1756 else
1757 reg_val = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1;
1758 ret_val = ixgbe_write_i2c_combined(hw, IXGBE_CS4227, reg_slice,
1759 reg_val);
1760
1761 /* Setup XFI internal link. */
1762 ret_val = ixgbe_setup_ixfi_x550em(hw, &speed);
1763 } else {
1764 /* Configure internal PHY for KR/KX. */
1765 ixgbe_setup_kr_speed_x550em(hw, speed);
1766
1767 /* Configure CS4227 LINE side to proper mode. */
1768 reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB +
1769 (hw->bus.lan_id << 12);
1770 if (setup_linear)
1771 reg_val = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1;
1772 else
1773 reg_val = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1;
1774 ret_val = ixgbe_write_i2c_combined(hw, IXGBE_CS4227, reg_slice,
1775 reg_val);
1776 }
1777 return ret_val;
1778}
1779
1780/**
1781 * ixgbe_setup_ixfi_x550em - Configure the KR PHY for iXFI mode.
1782 * @hw: pointer to hardware structure
1783 * @speed: the link speed to force
1784 *
1785 * Configures the integrated KR PHY to use iXFI mode. Used to connect an
1786 * internal and external PHY at a specific speed, without autonegotiation.
1787 **/
1788static s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed)
1789{
1790 s32 status;
1791 u32 reg_val;
1792
1793 /* Disable AN and force speed to 10G Serial. */
1794 status = ixgbe_read_iosf_sb_reg_x550(hw,
1795 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
1796 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
1797 if (status != IXGBE_SUCCESS)
1798 return status;
1799
1800 reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE;
1801 reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK;
1802
1803 /* Select forced link speed for internal PHY. */
1804 switch (*speed) {
1805 case IXGBE_LINK_SPEED_10GB_FULL:
1806 reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_10G;
1807 break;
1808 case IXGBE_LINK_SPEED_1GB_FULL:
1809 reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G;
1810 break;
1811 default:
1812 /* Other link speeds are not supported by internal KR PHY. */
1813 return IXGBE_ERR_LINK_SETUP;
1814 }
1815
1816 status = ixgbe_write_iosf_sb_reg_x550(hw,
1817 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
1818 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
1819 if (status != IXGBE_SUCCESS)
1820 return status;
1821
1822 /* Disable training protocol FSM. */
1823 status = ixgbe_read_iosf_sb_reg_x550(hw,
1824 IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id),
1825 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
1826 if (status != IXGBE_SUCCESS)
1827 return status;
1828 reg_val |= IXGBE_KRM_RX_TRN_LINKUP_CTRL_CONV_WO_PROTOCOL;
1829 status = ixgbe_write_iosf_sb_reg_x550(hw,
1830 IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id),
1831 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
1832 if (status != IXGBE_SUCCESS)
1833 return status;
1834
1835 /* Disable Flex from training TXFFE. */
1836 status = ixgbe_read_iosf_sb_reg_x550(hw,
1837 IXGBE_KRM_DSP_TXFFE_STATE_4(hw->bus.lan_id),
1838 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
1839 if (status != IXGBE_SUCCESS)
1840 return status;
1841 reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_C0_EN;
1842 reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN;
1843 reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN;
1844 status = ixgbe_write_iosf_sb_reg_x550(hw,
1845 IXGBE_KRM_DSP_TXFFE_STATE_4(hw->bus.lan_id),
1846 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
1847 if (status != IXGBE_SUCCESS)
1848 return status;
1849 status = ixgbe_read_iosf_sb_reg_x550(hw,
1850 IXGBE_KRM_DSP_TXFFE_STATE_5(hw->bus.lan_id),
1851 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
1852 if (status != IXGBE_SUCCESS)
1853 return status;
1854 reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_C0_EN;
1855 reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN;
1856 reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN;
1857 status = ixgbe_write_iosf_sb_reg_x550(hw,
1858 IXGBE_KRM_DSP_TXFFE_STATE_5(hw->bus.lan_id),
1859 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
1860 if (status != IXGBE_SUCCESS)
1861 return status;
1862
1863 /* Enable override for coefficients. */
1864 status = ixgbe_read_iosf_sb_reg_x550(hw,
1865 IXGBE_KRM_TX_COEFF_CTRL_1(hw->bus.lan_id),
1866 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
1867 if (status != IXGBE_SUCCESS)
1868 return status;
1869 reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_OVRRD_EN;
1870 reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CZERO_EN;
1871 reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CPLUS1_OVRRD_EN;
1872 reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CMINUS1_OVRRD_EN;
1873 status = ixgbe_write_iosf_sb_reg_x550(hw,
1874 IXGBE_KRM_TX_COEFF_CTRL_1(hw->bus.lan_id),
1875 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
1876 if (status != IXGBE_SUCCESS)
1877 return status;
1878
1879 /* Toggle port SW reset by AN reset. */
1880 status = ixgbe_read_iosf_sb_reg_x550(hw,
1881 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
1882 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
1883 if (status != IXGBE_SUCCESS)
1884 return status;
1885 reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART;
1886 status = ixgbe_write_iosf_sb_reg_x550(hw,
1887 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
1888 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
1889
1890 return status;
1891}
1892
1893/**
1894 * ixgbe_ext_phy_t_x550em_get_link - Get ext phy link status
1895 * @hw: address of hardware structure
1896 * @link_up: address of boolean to indicate link status
1897 *
1898 * Returns error code if unable to get link status.
1899 */
1900static s32 ixgbe_ext_phy_t_x550em_get_link(struct ixgbe_hw *hw, bool *link_up)
1901{
1902 u32 ret;
1903 u16 autoneg_status;
1904
1905 *link_up = FALSE;
1906
1907 /* read this twice back to back to indicate current status */
1908 ret = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
1909 IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
1910 &autoneg_status);
1911 if (ret != IXGBE_SUCCESS)
1912 return ret;
1913
1914 ret = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
1915 IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
1916 &autoneg_status);
1917 if (ret != IXGBE_SUCCESS)
1918 return ret;
1919
1920 *link_up = !!(autoneg_status & IXGBE_MDIO_AUTO_NEG_LINK_STATUS);
1921
1922 return IXGBE_SUCCESS;
1923}
1924
1925/**
1926 * ixgbe_setup_internal_phy_t_x550em - Configure KR PHY to X557 link
1927 * @hw: point to hardware structure
1928 *
1929 * Configures the link between the integrated KR PHY and the external X557 PHY
1930 * The driver will call this function when it gets a link status change
1931 * interrupt from the X557 PHY. This function configures the link speed
1932 * between the PHYs to match the link speed of the BASE-T link.
1933 *
1934 * A return of a non-zero value indicates an error, and the base driver should
1935 * not report link up.
1936 */
1937s32 ixgbe_setup_internal_phy_t_x550em(struct ixgbe_hw *hw)
1938{
1939 ixgbe_link_speed force_speed;
1940 bool link_up;
1941 u32 status;
1942 u16 speed;
1943
1944 if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper)
1945 return IXGBE_ERR_CONFIG;
1946
1947 /* If link is not up, then there is no setup necessary so return */
1948 status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up);
1949 if (status != IXGBE_SUCCESS)
1950 return status;
1951
1952 if (!link_up)
1953 return IXGBE_SUCCESS;
1954
1955 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_STAT,
1956 IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
1957 &speed);
1958 if (status != IXGBE_SUCCESS)
1959 return status;
1960
1961 /* If link is not still up, then no setup is necessary so return */
1962 status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up);
1963 if (status != IXGBE_SUCCESS)
1964 return status;
1965 if (!link_up)
1966 return IXGBE_SUCCESS;
1967
1968 /* clear everything but the speed and duplex bits */
1969 speed &= IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_MASK;
1970
1971 switch (speed) {
1972 case IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB_FULL:
1973 force_speed = IXGBE_LINK_SPEED_10GB_FULL;
1974 break;
1975 case IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB_FULL:
1976 force_speed = IXGBE_LINK_SPEED_1GB_FULL;
1977 break;
1978 default:
1979 /* Internal PHY does not support anything else */
1980 return IXGBE_ERR_INVALID_LINK_SETTINGS;
1981 }
1982
1983 return ixgbe_setup_ixfi_x550em(hw, &force_speed);
1984}
1985
1986/**
1987 * ixgbe_setup_phy_loopback_x550em - Configure the KR PHY for loopback.
1988 * @hw: pointer to hardware structure
1989 *
1990 * Configures the integrated KR PHY to use internal loopback mode.
1991 **/
1992s32 ixgbe_setup_phy_loopback_x550em(struct ixgbe_hw *hw)
1993{
1994 s32 status;
1995 u32 reg_val;
1996
1997 /* Disable AN and force speed to 10G Serial. */
1998 status = ixgbe_read_iosf_sb_reg_x550(hw,
1999 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
2000 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
2001 if (status != IXGBE_SUCCESS)
2002 return status;
2003 reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE;
2004 reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK;
2005 reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_10G;
2006 status = ixgbe_write_iosf_sb_reg_x550(hw,
2007 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
2008 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
2009 if (status != IXGBE_SUCCESS)
2010 return status;
2011
2012 /* Set near-end loopback clocks. */
2013 status = ixgbe_read_iosf_sb_reg_x550(hw,
2014 IXGBE_KRM_PORT_CAR_GEN_CTRL(hw->bus.lan_id),
2015 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
2016 if (status != IXGBE_SUCCESS)
2017 return status;
2018 reg_val |= IXGBE_KRM_PORT_CAR_GEN_CTRL_NELB_32B;
2019 reg_val |= IXGBE_KRM_PORT_CAR_GEN_CTRL_NELB_KRPCS;
2020 status = ixgbe_write_iosf_sb_reg_x550(hw,
2021 IXGBE_KRM_PORT_CAR_GEN_CTRL(hw->bus.lan_id),
2022 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
2023 if (status != IXGBE_SUCCESS)
2024 return status;
2025
2026 /* Set loopback enable. */
2027 status = ixgbe_read_iosf_sb_reg_x550(hw,
2028 IXGBE_KRM_PMD_DFX_BURNIN(hw->bus.lan_id),
2029 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
2030 if (status != IXGBE_SUCCESS)
2031 return status;
2032 reg_val |= IXGBE_KRM_PMD_DFX_BURNIN_TX_RX_KR_LB_MASK;
2033 status = ixgbe_write_iosf_sb_reg_x550(hw,
2034 IXGBE_KRM_PMD_DFX_BURNIN(hw->bus.lan_id),
2035 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
2036 if (status != IXGBE_SUCCESS)
2037 return status;
2038
2039 /* Training bypass. */
2040 status = ixgbe_read_iosf_sb_reg_x550(hw,
2041 IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id),
2042 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
2043 if (status != IXGBE_SUCCESS)
2044 return status;
2045 reg_val |= IXGBE_KRM_RX_TRN_LINKUP_CTRL_PROTOCOL_BYPASS;
2046 status = ixgbe_write_iosf_sb_reg_x550(hw,
2047 IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id),
2048 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
2049
2050 return status;
2051}
2052
2053/**
2054 * ixgbe_read_ee_hostif_X550 - Read EEPROM word using a host interface command
2055 * assuming that the semaphore is already obtained.
2056 * @hw: pointer to hardware structure
2057 * @offset: offset of word in the EEPROM to read
2058 * @data: word read from the EEPROM
2059 *
2060 * Reads a 16 bit word from the EEPROM using the hostif.
2061 **/
2062s32 ixgbe_read_ee_hostif_data_X550(struct ixgbe_hw *hw, u16 offset,
2063 u16 *data)
2064{
2065 s32 status;
2066 struct ixgbe_hic_read_shadow_ram buffer;
2067
2068 DEBUGFUNC("ixgbe_read_ee_hostif_data_X550");
2069 buffer.hdr.req.cmd = FW_READ_SHADOW_RAM_CMD;
2070 buffer.hdr.req.buf_lenh = 0;
2071 buffer.hdr.req.buf_lenl = FW_READ_SHADOW_RAM_LEN;
2072 buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM;
2073
2074 /* convert offset from words to bytes */
2075 buffer.address = IXGBE_CPU_TO_BE32(offset * 2);
2076 /* one word */
2077 buffer.length = IXGBE_CPU_TO_BE16(sizeof(u16));
2078
2079 status = ixgbe_host_interface_command(hw, (u32 *)&buffer,
2080 sizeof(buffer),
2081 IXGBE_HI_COMMAND_TIMEOUT, FALSE);
2082
2083 if (status)
2084 return status;
2085
2086 *data = (u16)IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG,
2087 FW_NVM_DATA_OFFSET);
2088
2089 return 0;
2090}
2091
2092/**
2093 * ixgbe_read_ee_hostif_X550 - Read EEPROM word using a host interface command
2094 * @hw: pointer to hardware structure
2095 * @offset: offset of word in the EEPROM to read
2096 * @data: word read from the EEPROM
2097 *
2098 * Reads a 16 bit word from the EEPROM using the hostif.
2099 **/
2100s32 ixgbe_read_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset,
2101 u16 *data)
2102{
2103 s32 status = IXGBE_SUCCESS;
2104
2105 DEBUGFUNC("ixgbe_read_ee_hostif_X550");
2106
2107 if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) ==
2108 IXGBE_SUCCESS) {
2109 status = ixgbe_read_ee_hostif_data_X550(hw, offset, data);
2110 hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
2111 } else {
2112 status = IXGBE_ERR_SWFW_SYNC;
2113 }
2114
2115 return status;
2116}
2117
2118/**
2119 * ixgbe_read_ee_hostif_buffer_X550- Read EEPROM word(s) using hostif
2120 * @hw: pointer to hardware structure
2121 * @offset: offset of word in the EEPROM to read
2122 * @words: number of words
2123 * @data: word(s) read from the EEPROM
2124 *
2125 * Reads a 16 bit word(s) from the EEPROM using the hostif.
2126 **/
2127s32 ixgbe_read_ee_hostif_buffer_X550(struct ixgbe_hw *hw,
2128 u16 offset, u16 words, u16 *data)
2129{
2130 struct ixgbe_hic_read_shadow_ram buffer;
2131 u32 current_word = 0;
2132 u16 words_to_read;
2133 s32 status;
2134 u32 i;
2135
2136 DEBUGFUNC("ixgbe_read_ee_hostif_buffer_X550");
2137
2138 /* Take semaphore for the entire operation. */
2139 status = hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
2140 if (status) {
2141 DEBUGOUT("EEPROM read buffer - semaphore failed\n");
2142 return status;
2143 }
2144 while (words) {
2145 if (words > FW_MAX_READ_BUFFER_SIZE / 2)
2146 words_to_read = FW_MAX_READ_BUFFER_SIZE / 2;
2147 else
2148 words_to_read = words;
2149
2150 buffer.hdr.req.cmd = FW_READ_SHADOW_RAM_CMD;
2151 buffer.hdr.req.buf_lenh = 0;
2152 buffer.hdr.req.buf_lenl = FW_READ_SHADOW_RAM_LEN;
2153 buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM;
2154
2155 /* convert offset from words to bytes */
2156 buffer.address = IXGBE_CPU_TO_BE32((offset + current_word) * 2);
2157 buffer.length = IXGBE_CPU_TO_BE16(words_to_read * 2);
2158
2159 status = ixgbe_host_interface_command(hw, (u32 *)&buffer,
2160 sizeof(buffer),
2161 IXGBE_HI_COMMAND_TIMEOUT,
2162 FALSE);
2163
2164 if (status) {
2165 DEBUGOUT("Host interface command failed\n");
2166 goto out;
2167 }
2168
2169 for (i = 0; i < words_to_read; i++) {
2170 u32 reg = IXGBE_FLEX_MNG + (FW_NVM_DATA_OFFSET << 2) +
2171 2 * i;
2172 u32 value = IXGBE_READ_REG(hw, reg);
2173
2174 data[current_word] = (u16)(value & 0xffff);
2175 current_word++;
2176 i++;
2177 if (i < words_to_read) {
2178 value >>= 16;
2179 data[current_word] = (u16)(value & 0xffff);
2180 current_word++;
2181 }
2182 }
2183 words -= words_to_read;
2184 }
2185
2186out:
2187 hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
2188 return status;
2189}
2190
2191/**
2192 * ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif
2193 * @hw: pointer to hardware structure
2194 * @offset: offset of word in the EEPROM to write
2195 * @data: word write to the EEPROM
2196 *
2197 * Write a 16 bit word to the EEPROM using the hostif.
2198 **/
2199s32 ixgbe_write_ee_hostif_data_X550(struct ixgbe_hw *hw, u16 offset,
2200 u16 data)
2201{
2202 s32 status;
2203 struct ixgbe_hic_write_shadow_ram buffer;
2204
2205 DEBUGFUNC("ixgbe_write_ee_hostif_data_X550");
2206
2207 buffer.hdr.req.cmd = FW_WRITE_SHADOW_RAM_CMD;
2208 buffer.hdr.req.buf_lenh = 0;
2209 buffer.hdr.req.buf_lenl = FW_WRITE_SHADOW_RAM_LEN;
2210 buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM;
2211
2212 /* one word */
2213 buffer.length = IXGBE_CPU_TO_BE16(sizeof(u16));
2214 buffer.data = data;
2215 buffer.address = IXGBE_CPU_TO_BE32(offset * 2);
2216
2217 status = ixgbe_host_interface_command(hw, (u32 *)&buffer,
2218 sizeof(buffer),
2219 IXGBE_HI_COMMAND_TIMEOUT, FALSE);
2220
2221 return status;
2222}
2223
2224/**
2225 * ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif
2226 * @hw: pointer to hardware structure
2227 * @offset: offset of word in the EEPROM to write
2228 * @data: word write to the EEPROM
2229 *
2230 * Write a 16 bit word to the EEPROM using the hostif.
2231 **/
2232s32 ixgbe_write_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset,
2233 u16 data)
2234{
2235 s32 status = IXGBE_SUCCESS;
2236
2237 DEBUGFUNC("ixgbe_write_ee_hostif_X550");
2238
2239 if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) ==
2240 IXGBE_SUCCESS) {
2241 status = ixgbe_write_ee_hostif_data_X550(hw, offset, data);
2242 hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
2243 } else {
2244 DEBUGOUT("write ee hostif failed to get semaphore");
2245 status = IXGBE_ERR_SWFW_SYNC;
2246 }
2247
2248 return status;
2249}
2250
2251/**
2252 * ixgbe_write_ee_hostif_buffer_X550 - Write EEPROM word(s) using hostif
2253 * @hw: pointer to hardware structure
2254 * @offset: offset of word in the EEPROM to write
2255 * @words: number of words
2256 * @data: word(s) write to the EEPROM
2257 *
2258 * Write a 16 bit word(s) to the EEPROM using the hostif.
2259 **/
2260s32 ixgbe_write_ee_hostif_buffer_X550(struct ixgbe_hw *hw,
2261 u16 offset, u16 words, u16 *data)
2262{
2263 s32 status = IXGBE_SUCCESS;
2264 u32 i = 0;
2265
2266 DEBUGFUNC("ixgbe_write_ee_hostif_buffer_X550");
2267
2268 /* Take semaphore for the entire operation. */
2269 status = hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
2270 if (status != IXGBE_SUCCESS) {
2271 DEBUGOUT("EEPROM write buffer - semaphore failed\n");
2272 goto out;
2273 }
2274
2275 for (i = 0; i < words; i++) {
2276 status = ixgbe_write_ee_hostif_data_X550(hw, offset + i,
2277 data[i]);
2278
2279 if (status != IXGBE_SUCCESS) {
2280 DEBUGOUT("Eeprom buffered write failed\n");
2281 break;
2282 }
2283 }
2284
2285 hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
2286out:
2287
2288 return status;
2289}
2290
2291/**
2292 * ixgbe_checksum_ptr_x550 - Checksum one pointer region
2293 * @hw: pointer to hardware structure
2294 * @ptr: pointer offset in eeprom
2295 * @size: size of section pointed by ptr, if 0 first word will be used as size
2296 * @csum: address of checksum to update
2297 *
2298 * Returns error status for any failure
2299 */
2300static s32 ixgbe_checksum_ptr_x550(struct ixgbe_hw *hw, u16 ptr,
2301 u16 size, u16 *csum, u16 *buffer,
2302 u32 buffer_size)
2303{
2304 u16 buf[256];
2305 s32 status;
2306 u16 length, bufsz, i, start;
2307 u16 *local_buffer;
2308
2309 bufsz = sizeof(buf) / sizeof(buf[0]);
2310
2311 /* Read a chunk at the pointer location */
2312 if (!buffer) {
2313 status = ixgbe_read_ee_hostif_buffer_X550(hw, ptr, bufsz, buf);
2314 if (status) {
2315 DEBUGOUT("Failed to read EEPROM image\n");
2316 return status;
2317 }
2318 local_buffer = buf;
2319 } else {
2320 if (buffer_size < ptr)
2321 return IXGBE_ERR_PARAM;
2322 local_buffer = &buffer[ptr];
2323 }
2324
2325 if (size) {
2326 start = 0;
2327 length = size;
2328 } else {
2329 start = 1;
2330 length = local_buffer[0];
2331
2332 /* Skip pointer section if length is invalid. */
2333 if (length == 0xFFFF || length == 0 ||
2334 (ptr + length) >= hw->eeprom.word_size)
2335 return IXGBE_SUCCESS;
2336 }
2337
2338 if (buffer && ((u32)start + (u32)length > buffer_size))
2339 return IXGBE_ERR_PARAM;
2340
2341 for (i = start; length; i++, length--) {
2342 if (i == bufsz && !buffer) {
2343 ptr += bufsz;
2344 i = 0;
2345 if (length < bufsz)
2346 bufsz = length;
2347
2348 /* Read a chunk at the pointer location */
2349 status = ixgbe_read_ee_hostif_buffer_X550(hw, ptr,
2350 bufsz, buf);
2351 if (status) {
2352 DEBUGOUT("Failed to read EEPROM image\n");
2353 return status;
2354 }
2355 }
2356 *csum += local_buffer[i];
2357 }
2358 return IXGBE_SUCCESS;
2359}
2360
2361/**
2362 * ixgbe_calc_checksum_X550 - Calculates and returns the checksum
2363 * @hw: pointer to hardware structure
2364 * @buffer: pointer to buffer containing calculated checksum
2365 * @buffer_size: size of buffer
2366 *
2367 * Returns a negative error code on error, or the 16-bit checksum
2368 **/
2369s32 ixgbe_calc_checksum_X550(struct ixgbe_hw *hw, u16 *buffer, u32 buffer_size)
2370{
2371 u16 eeprom_ptrs[IXGBE_EEPROM_LAST_WORD + 1];
2372 u16 *local_buffer;
2373 s32 status;
2374 u16 checksum = 0;
2375 u16 pointer, i, size;
2376
2377 DEBUGFUNC("ixgbe_calc_eeprom_checksum_X550");
2378
2379 hw->eeprom.ops.init_params(hw);
2380
2381 if (!buffer) {
2382 /* Read pointer area */
2383 status = ixgbe_read_ee_hostif_buffer_X550(hw, 0,
2384 IXGBE_EEPROM_LAST_WORD + 1,
2385 eeprom_ptrs);
2386 if (status) {
2387 DEBUGOUT("Failed to read EEPROM image\n");
2388 return status;
2389 }
2390 local_buffer = eeprom_ptrs;
2391 } else {
2392 if (buffer_size < IXGBE_EEPROM_LAST_WORD)
2393 return IXGBE_ERR_PARAM;
2394 local_buffer = buffer;
2395 }
2396
2397 /*
2398 * For X550 hardware include 0x0-0x41 in the checksum, skip the
2399 * checksum word itself
2400 */
2401 for (i = 0; i <= IXGBE_EEPROM_LAST_WORD; i++)
2402 if (i != IXGBE_EEPROM_CHECKSUM)
2403 checksum += local_buffer[i];
2404
2405 /*
2406 * Include all data from pointers 0x3, 0x6-0xE. This excludes the
2407 * FW, PHY module, and PCIe Expansion/Option ROM pointers.
2408 */
2409 for (i = IXGBE_PCIE_ANALOG_PTR_X550; i < IXGBE_FW_PTR; i++) {
2410 if (i == IXGBE_PHY_PTR || i == IXGBE_OPTION_ROM_PTR)
2411 continue;
2412
2413 pointer = local_buffer[i];
2414
2415 /* Skip pointer section if the pointer is invalid. */
2416 if (pointer == 0xFFFF || pointer == 0 ||
2417 pointer >= hw->eeprom.word_size)
2418 continue;
2419
2420 switch (i) {
2421 case IXGBE_PCIE_GENERAL_PTR:
2422 size = IXGBE_IXGBE_PCIE_GENERAL_SIZE;
2423 break;
2424 case IXGBE_PCIE_CONFIG0_PTR:
2425 case IXGBE_PCIE_CONFIG1_PTR:
2426 size = IXGBE_PCIE_CONFIG_SIZE;
2427 break;
2428 default:
2429 size = 0;
2430 break;
2431 }
2432
2433 status = ixgbe_checksum_ptr_x550(hw, pointer, size, &checksum,
2434 buffer, buffer_size);
2435 if (status)
2436 return status;
2437 }
2438
2439 checksum = (u16)IXGBE_EEPROM_SUM - checksum;
2440
2441 return (s32)checksum;
2442}
2443
2444/**
2445 * ixgbe_calc_eeprom_checksum_X550 - Calculates and returns the checksum
2446 * @hw: pointer to hardware structure
2447 *
2448 * Returns a negative error code on error, or the 16-bit checksum
2449 **/
2450s32 ixgbe_calc_eeprom_checksum_X550(struct ixgbe_hw *hw)
2451{
2452 return ixgbe_calc_checksum_X550(hw, NULL, 0);
2453}
2454
2455/**
2456 * ixgbe_validate_eeprom_checksum_X550 - Validate EEPROM checksum
2457 * @hw: pointer to hardware structure
2458 * @checksum_val: calculated checksum
2459 *
2460 * Performs checksum calculation and validates the EEPROM checksum. If the
2461 * caller does not need checksum_val, the value can be NULL.
2462 **/
2463s32 ixgbe_validate_eeprom_checksum_X550(struct ixgbe_hw *hw, u16 *checksum_val)
2464{
2465 s32 status;
2466 u16 checksum;
2467 u16 read_checksum = 0;
2468
2469 DEBUGFUNC("ixgbe_validate_eeprom_checksum_X550");
2470
2471 /* Read the first word from the EEPROM. If this times out or fails, do
2472 * not continue or we could be in for a very long wait while every
2473 * EEPROM read fails
2474 */
2475 status = hw->eeprom.ops.read(hw, 0, &checksum);
2476 if (status) {
2477 DEBUGOUT("EEPROM read failed\n");
2478 return status;
2479 }
2480
2481 status = hw->eeprom.ops.calc_checksum(hw);
2482 if (status < 0)
2483 return status;
2484
2485 checksum = (u16)(status & 0xffff);
2486
2487 status = ixgbe_read_ee_hostif_X550(hw, IXGBE_EEPROM_CHECKSUM,
2488 &read_checksum);
2489 if (status)
2490 return status;
2491
2492 /* Verify read checksum from EEPROM is the same as
2493 * calculated checksum
2494 */
2495 if (read_checksum != checksum) {
2496 status = IXGBE_ERR_EEPROM_CHECKSUM;
2497 ERROR_REPORT1(IXGBE_ERROR_INVALID_STATE,
2498 "Invalid EEPROM checksum");
2499 }
2500
2501 /* If the user cares, return the calculated checksum */
2502 if (checksum_val)
2503 *checksum_val = checksum;
2504
2505 return status;
2506}
2507
2508/**
2509 * ixgbe_update_eeprom_checksum_X550 - Updates the EEPROM checksum and flash
2510 * @hw: pointer to hardware structure
2511 *
2512 * After writing EEPROM to shadow RAM using EEWR register, software calculates
2513 * checksum and updates the EEPROM and instructs the hardware to update
2514 * the flash.
2515 **/
2516s32 ixgbe_update_eeprom_checksum_X550(struct ixgbe_hw *hw)
2517{
2518 s32 status;
2519 u16 checksum = 0;
2520
2521 DEBUGFUNC("ixgbe_update_eeprom_checksum_X550");
2522
2523 /* Read the first word from the EEPROM. If this times out or fails, do
2524 * not continue or we could be in for a very long wait while every
2525 * EEPROM read fails
2526 */
2527 status = ixgbe_read_ee_hostif_X550(hw, 0, &checksum);
2528 if (status) {
2529 DEBUGOUT("EEPROM read failed\n");
2530 return status;
2531 }
2532
2533 status = ixgbe_calc_eeprom_checksum_X550(hw);
2534 if (status < 0)
2535 return status;
2536
2537 checksum = (u16)(status & 0xffff);
2538
2539 status = ixgbe_write_ee_hostif_X550(hw, IXGBE_EEPROM_CHECKSUM,
2540 checksum);
2541 if (status)
2542 return status;
2543
2544 status = ixgbe_update_flash_X550(hw);
2545
2546 return status;
2547}
2548
2549/**
2550 * ixgbe_update_flash_X550 - Instruct HW to copy EEPROM to Flash device
2551 * @hw: pointer to hardware structure
2552 *
2553 * Issue a shadow RAM dump to FW to copy EEPROM from shadow RAM to the flash.
2554 **/
2555s32 ixgbe_update_flash_X550(struct ixgbe_hw *hw)
2556{
2557 s32 status = IXGBE_SUCCESS;
2558 union ixgbe_hic_hdr2 buffer;
2559
2560 DEBUGFUNC("ixgbe_update_flash_X550");
2561
2562 buffer.req.cmd = FW_SHADOW_RAM_DUMP_CMD;
2563 buffer.req.buf_lenh = 0;
2564 buffer.req.buf_lenl = FW_SHADOW_RAM_DUMP_LEN;
2565 buffer.req.checksum = FW_DEFAULT_CHECKSUM;
2566
2567 status = ixgbe_host_interface_command(hw, (u32 *)&buffer,
2568 sizeof(buffer),
2569 IXGBE_HI_COMMAND_TIMEOUT, FALSE);
2570
2571 return status;
2572}
2573
2574/**
2575 * ixgbe_get_supported_physical_layer_X550em - Returns physical layer type
2576 * @hw: pointer to hardware structure
2577 *
2578 * Determines physical layer capabilities of the current configuration.
2579 **/
2580u32 ixgbe_get_supported_physical_layer_X550em(struct ixgbe_hw *hw)
2581{
2582 u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
2583 u16 ext_ability = 0;
2584
2585 DEBUGFUNC("ixgbe_get_supported_physical_layer_X550em");
2586
2587 hw->phy.ops.identify(hw);
2588
2589 switch (hw->phy.type) {
2590 case ixgbe_phy_x550em_kr:
2591 physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KR |
2592 IXGBE_PHYSICAL_LAYER_1000BASE_KX;
2593 break;
2594 case ixgbe_phy_x550em_kx4:
2595 physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4 |
2596 IXGBE_PHYSICAL_LAYER_1000BASE_KX;
2597 break;
2598 case ixgbe_phy_x550em_ext_t:
2599 hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_EXT_ABILITY,
2600 IXGBE_MDIO_PMA_PMD_DEV_TYPE,
2601 &ext_ability);
2602 if (ext_ability & IXGBE_MDIO_PHY_10GBASET_ABILITY)
2603 physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T;
2604 if (ext_ability & IXGBE_MDIO_PHY_1000BASET_ABILITY)
2605 physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T;
2606 break;
2607 default:
2608 break;
2609 }
2610
2611 if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber)
2612 physical_layer = ixgbe_get_supported_phy_sfp_layer_generic(hw);
2613
2614 return physical_layer;
2615}
2616
2617/**
2618 * ixgbe_get_bus_info_x550em - Set PCI bus info
2619 * @hw: pointer to hardware structure
2620 *
2621 * Sets bus link width and speed to unknown because X550em is
2622 * not a PCI device.
2623 **/
2624s32 ixgbe_get_bus_info_X550em(struct ixgbe_hw *hw)
2625{
2626
2627 DEBUGFUNC("ixgbe_get_bus_info_x550em");
2628
2629 hw->bus.width = ixgbe_bus_width_unknown;
2630 hw->bus.speed = ixgbe_bus_speed_unknown;
2631
2632 hw->mac.ops.set_lan_id(hw);
2633
2634 return IXGBE_SUCCESS;
2635}
2636
2637/**
2638 * ixgbe_disable_rx_x550 - Disable RX unit
2639 *
2640 * Enables the Rx DMA unit for x550
2641 **/
2642void ixgbe_disable_rx_x550(struct ixgbe_hw *hw)
2643{
2644 u32 rxctrl, pfdtxgswc;
2645 s32 status;
2646 struct ixgbe_hic_disable_rxen fw_cmd;
2647
2648 DEBUGFUNC("ixgbe_enable_rx_dma_x550");
2649
2650 rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
2651 if (rxctrl & IXGBE_RXCTRL_RXEN) {
2652 pfdtxgswc = IXGBE_READ_REG(hw, IXGBE_PFDTXGSWC);
2653 if (pfdtxgswc & IXGBE_PFDTXGSWC_VT_LBEN) {
2654 pfdtxgswc &= ~IXGBE_PFDTXGSWC_VT_LBEN;
2655 IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, pfdtxgswc);
2656 hw->mac.set_lben = TRUE;
2657 } else {
2658 hw->mac.set_lben = FALSE;
2659 }
2660
2661 fw_cmd.hdr.cmd = FW_DISABLE_RXEN_CMD;
2662 fw_cmd.hdr.buf_len = FW_DISABLE_RXEN_LEN;
2663 fw_cmd.hdr.checksum = FW_DEFAULT_CHECKSUM;
2664 fw_cmd.port_number = (u8)hw->bus.lan_id;
2665
2666 status = ixgbe_host_interface_command(hw, (u32 *)&fw_cmd,
2667 sizeof(struct ixgbe_hic_disable_rxen),
2668 IXGBE_HI_COMMAND_TIMEOUT, TRUE);
2669
2670 /* If we fail - disable RX using register write */
2671 if (status) {
2672 rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
2673 if (rxctrl & IXGBE_RXCTRL_RXEN) {
2674 rxctrl &= ~IXGBE_RXCTRL_RXEN;
2675 IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl);
2676 }
2677 }
2678 }
2679}
2680
2681/**
2682 * ixgbe_enter_lplu_x550em - Transition to low power states
2683 * @hw: pointer to hardware structure
2684 *
2685 * Configures Low Power Link Up on transition to low power states
2686 * (from D0 to non-D0). Link is required to enter LPLU so avoid resetting the
2687 * X557 PHY immediately prior to entering LPLU.
2688 **/
2689s32 ixgbe_enter_lplu_t_x550em(struct ixgbe_hw *hw)
2690{
2691 u16 an_10g_cntl_reg, autoneg_reg, speed;
2692 s32 status;
2693 ixgbe_link_speed lcd_speed;
2694 u32 save_autoneg;
2695 bool link_up;
2696
2697 /* SW LPLU not required on later HW revisions. */
2698 if (IXGBE_FUSES0_REV1 & IXGBE_READ_REG(hw, IXGBE_FUSES0_GROUP(0)))
2699 return IXGBE_SUCCESS;
2700
2701 /* If blocked by MNG FW, then don't restart AN */
2702 if (ixgbe_check_reset_blocked(hw))
2703 return IXGBE_SUCCESS;
2704
2705 status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up);
2706 if (status != IXGBE_SUCCESS)
2707 return status;
2708
2709 status = ixgbe_read_eeprom(hw, NVM_INIT_CTRL_3, &hw->eeprom.ctrl_word_3);
2710
2711 if (status != IXGBE_SUCCESS)
2712 return status;
2713
2714 /* If link is down, LPLU disabled in NVM, WoL disabled, or manageability
2715 * disabled, then force link down by entering low power mode.
2716 */
2717 if (!link_up || !(hw->eeprom.ctrl_word_3 & NVM_INIT_CTRL_3_LPLU) ||
2718 !(hw->wol_enabled || ixgbe_mng_present(hw)))
2719 return ixgbe_set_copper_phy_power(hw, FALSE);
2720
2721 /* Determine LCD */
2722 status = ixgbe_get_lcd_t_x550em(hw, &lcd_speed);
2723
2724 if (status != IXGBE_SUCCESS)
2725 return status;
2726
2727 /* If no valid LCD link speed, then force link down and exit. */
2728 if (lcd_speed == IXGBE_LINK_SPEED_UNKNOWN)
2729 return ixgbe_set_copper_phy_power(hw, FALSE);
2730
2731 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_STAT,
2732 IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
2733 &speed);
2734
2735 if (status != IXGBE_SUCCESS)
2736 return status;
2737
2738 /* If no link now, speed is invalid so take link down */
2739 status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up);
2740 if (status != IXGBE_SUCCESS)
2741 return ixgbe_set_copper_phy_power(hw, FALSE);
2742
2743 /* clear everything but the speed bits */
2744 speed &= IXGBE_MDIO_AUTO_NEG_VEN_STAT_SPEED_MASK;
2745
2746 /* If current speed is already LCD, then exit. */
2747 if (((speed == IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB) &&
2748 (lcd_speed == IXGBE_LINK_SPEED_1GB_FULL)) ||
2749 ((speed == IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB) &&
2750 (lcd_speed == IXGBE_LINK_SPEED_10GB_FULL)))
2751 return status;
2752
2753 /* Clear AN completed indication */
2754 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM,
2755 IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
2756 &autoneg_reg);
2757
2758 if (status != IXGBE_SUCCESS)
2759 return status;
2760
2761 status = hw->phy.ops.read_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG,
2762 IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
2763 &an_10g_cntl_reg);
2764
2765 if (status != IXGBE_SUCCESS)
2766 return status;
2767
2768 status = hw->phy.ops.read_reg(hw,
2769 IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
2770 IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
2771 &autoneg_reg);
2772
2773 if (status != IXGBE_SUCCESS)
2774 return status;
2775
2776 save_autoneg = hw->phy.autoneg_advertised;
2777
2778 /* Setup link at least common link speed */
2779 status = hw->mac.ops.setup_link(hw, lcd_speed, FALSE);
2780
2781 /* restore autoneg from before setting lplu speed */
2782 hw->phy.autoneg_advertised = save_autoneg;
2783
2784 return status;
2785}
2786
2787/**
2788 * ixgbe_get_lcd_x550em - Determine lowest common denominator
2789 * @hw: pointer to hardware structure
2790 * @lcd_speed: pointer to lowest common link speed
2791 *
2792 * Determine lowest common link speed with link partner.
2793 **/
2794s32 ixgbe_get_lcd_t_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *lcd_speed)
2795{
2796 u16 an_lp_status;
2797 s32 status;
2798 u16 word = hw->eeprom.ctrl_word_3;
2799
2800 *lcd_speed = IXGBE_LINK_SPEED_UNKNOWN;
2801
2802 status = hw->phy.ops.read_reg(hw, IXGBE_AUTO_NEG_LP_STATUS,
2803 IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
2804 &an_lp_status);
2805
2806 if (status != IXGBE_SUCCESS)
2807 return status;
2808
2809 /* If link partner advertised 1G, return 1G */
2810 if (an_lp_status & IXGBE_AUTO_NEG_LP_1000BASE_CAP) {
2811 *lcd_speed = IXGBE_LINK_SPEED_1GB_FULL;
2812 return status;
2813 }
2814
2815 /* If 10G disabled for LPLU via NVM D10GMP, then return no valid LCD */
2816 if ((hw->bus.lan_id && (word & NVM_INIT_CTRL_3_D10GMP_PORT1)) ||
2817 (word & NVM_INIT_CTRL_3_D10GMP_PORT0))
2818 return status;
2819
2820 /* Link partner not capable of lower speeds, return 10G */
2821 *lcd_speed = IXGBE_LINK_SPEED_10GB_FULL;
2822 return status;
2823}
2824
2825/**
2826 * ixgbe_setup_fc_X550em - Set up flow control
2827 * @hw: pointer to hardware structure
2828 *
2829 * Called at init time to set up flow control.
2830 **/
2831s32 ixgbe_setup_fc_X550em(struct ixgbe_hw *hw)
2832{
2833 s32 ret_val = IXGBE_SUCCESS;
2834 u32 pause, asm_dir, reg_val;
2835
2836 DEBUGFUNC("ixgbe_setup_fc_X550em");
2837
2838 /* Validate the requested mode */
2839 if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) {
2840 ERROR_REPORT1(IXGBE_ERROR_UNSUPPORTED,
2841 "ixgbe_fc_rx_pause not valid in strict IEEE mode\n");
2842 ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
2843 goto out;
2844 }
2845
2846 /* 10gig parts do not have a word in the EEPROM to determine the
2847 * default flow control setting, so we explicitly set it to full.
2848 */
2849 if (hw->fc.requested_mode == ixgbe_fc_default)
2850 hw->fc.requested_mode = ixgbe_fc_full;
2851
2852 /* Determine PAUSE and ASM_DIR bits. */
2853 switch (hw->fc.requested_mode) {
2854 case ixgbe_fc_none:
2855 pause = 0;
2856 asm_dir = 0;
2857 break;
2858 case ixgbe_fc_tx_pause:
2859 pause = 0;
2860 asm_dir = 1;
2861 break;
2862 case ixgbe_fc_rx_pause:
2863 /* Rx Flow control is enabled and Tx Flow control is
2864 * disabled by software override. Since there really
2865 * isn't a way to advertise that we are capable of RX
2866 * Pause ONLY, we will advertise that we support both
2867 * symmetric and asymmetric Rx PAUSE, as such we fall
2868 * through to the fc_full statement. Later, we will
2869 * disable the adapter's ability to send PAUSE frames.
2870 */
2871 case ixgbe_fc_full:
2872 pause = 1;
2873 asm_dir = 1;
2874 break;
2875 default:
2876 ERROR_REPORT1(IXGBE_ERROR_ARGUMENT,
2877 "Flow control param set incorrectly\n");
2878 ret_val = IXGBE_ERR_CONFIG;
2879 goto out;
2880 }
2881
2882 if (hw->device_id == IXGBE_DEV_ID_X550EM_X_KR) {
2883 ret_val = ixgbe_read_iosf_sb_reg_x550(hw,
2884 IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id),
2885 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
2886 if (ret_val != IXGBE_SUCCESS)
2887 goto out;
2888 reg_val &= ~(IXGBE_KRM_AN_CNTL_1_SYM_PAUSE |
2889 IXGBE_KRM_AN_CNTL_1_ASM_PAUSE);
2890 if (pause)
2891 reg_val |= IXGBE_KRM_AN_CNTL_1_SYM_PAUSE;
2892 if (asm_dir)
2893 reg_val |= IXGBE_KRM_AN_CNTL_1_ASM_PAUSE;
2894 ret_val = ixgbe_write_iosf_sb_reg_x550(hw,
2895 IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id),
2896 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
2897
2898 /* This device does not fully support AN. */
2899 hw->fc.disable_fc_autoneg = TRUE;
2900 }
2901
2902out:
2903 return ret_val;
2904}
2905
2906/**
2907 * ixgbe_set_mux - Set mux for port 1 access with CS4227
2908 * @hw: pointer to hardware structure
2909 * @state: set mux if 1, clear if 0
2910 */
2911static void ixgbe_set_mux(struct ixgbe_hw *hw, u8 state)
2912{
2913 u32 esdp;
2914
2915 if (!hw->bus.lan_id)
2916 return;
2917 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
2918 if (state)
2919 esdp |= IXGBE_ESDP_SDP1;
2920 else
2921 esdp &= ~IXGBE_ESDP_SDP1;
2922 IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
2923 IXGBE_WRITE_FLUSH(hw);
2924}
2925
2926/**
2927 * ixgbe_acquire_swfw_sync_X550em - Acquire SWFW semaphore
2928 * @hw: pointer to hardware structure
2929 * @mask: Mask to specify which semaphore to acquire
2930 *
2931 * Acquires the SWFW semaphore and sets the I2C MUX
2932 **/
2933s32 ixgbe_acquire_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask)
2934{
2935 s32 status;
2936
2937 DEBUGFUNC("ixgbe_acquire_swfw_sync_X550em");
2938
2939 status = ixgbe_acquire_swfw_sync_X540(hw, mask);
2940 if (status)
2941 return status;
2942
2943 if (mask & IXGBE_GSSR_I2C_MASK)
2944 ixgbe_set_mux(hw, 1);
2945
2946 return IXGBE_SUCCESS;
2947}
2948
2949/**
2950 * ixgbe_release_swfw_sync_X550em - Release SWFW semaphore
2951 * @hw: pointer to hardware structure
2952 * @mask: Mask to specify which semaphore to release
2953 *
2954 * Releases the SWFW semaphore and sets the I2C MUX
2955 **/
2956void ixgbe_release_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask)
2957{
2958 DEBUGFUNC("ixgbe_release_swfw_sync_X550em");
2959
2960 if (mask & IXGBE_GSSR_I2C_MASK)
2961 ixgbe_set_mux(hw, 0);
2962
2963 ixgbe_release_swfw_sync_X540(hw, mask);
2964}
2965
2966/**
2967 * ixgbe_handle_lasi_ext_t_x550em - Handle external Base T PHY interrupt
2968 * @hw: pointer to hardware structure
2969 *
2970 * Handle external Base T PHY interrupt. If high temperature
2971 * failure alarm then return error, else if link status change
2972 * then setup internal/external PHY link
2973 *
2974 * Return IXGBE_ERR_OVERTEMP if interrupt is high temperature
2975 * failure alarm, else return PHY access status.
2976 */
2977s32 ixgbe_handle_lasi_ext_t_x550em(struct ixgbe_hw *hw)
2978{
2979 bool lsc;
2980 u32 status;
2981
2982 status = ixgbe_get_lasi_ext_t_x550em(hw, &lsc);
2983
2984 if (status != IXGBE_SUCCESS)
2985 return status;
2986
2987 if (lsc)
2988 return ixgbe_setup_internal_phy(hw);
2989
2990 return IXGBE_SUCCESS;
2991}
2992
2993/**
2994 * ixgbe_setup_mac_link_t_X550em - Sets the auto advertised link speed
2995 * @hw: pointer to hardware structure
2996 * @speed: new link speed
2997 * @autoneg_wait_to_complete: TRUE when waiting for completion is needed
2998 *
2999 * Setup internal/external PHY link speed based on link speed, then set
3000 * external PHY auto advertised link speed.
3001 *
3002 * Returns error status for any failure
3003 **/
3004s32 ixgbe_setup_mac_link_t_X550em(struct ixgbe_hw *hw,
3005 ixgbe_link_speed speed,
3006 bool autoneg_wait_to_complete)
3007{
3008 s32 status;
3009 ixgbe_link_speed force_speed;
3010
3011 DEBUGFUNC("ixgbe_setup_mac_link_t_X550em");
3012
3013 /* Setup internal/external PHY link speed to iXFI (10G), unless
3014 * only 1G is auto advertised then setup KX link.
3015 */
3016 if (speed & IXGBE_LINK_SPEED_10GB_FULL)
3017 force_speed = IXGBE_LINK_SPEED_10GB_FULL;
3018 else
3019 force_speed = IXGBE_LINK_SPEED_1GB_FULL;
3020
3021 /* If internal link mode is XFI, then setup XFI internal link. */
3022 if (!(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) {
3023 status = ixgbe_setup_ixfi_x550em(hw, &force_speed);
3024
3025 if (status != IXGBE_SUCCESS)
3026 return status;
3027 }
3028
3029 return hw->phy.ops.setup_link_speed(hw, speed, autoneg_wait_to_complete);
3030}
3031
3032/**
3033 * ixgbe_check_link_t_X550em - Determine link and speed status
3034 * @hw: pointer to hardware structure
3035 * @speed: pointer to link speed
3036 * @link_up: TRUE when link is up
3037 * @link_up_wait_to_complete: bool used to wait for link up or not
3038 *
3039 * Check that both the MAC and X557 external PHY have link.
3040 **/
3041s32 ixgbe_check_link_t_X550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
3042 bool *link_up, bool link_up_wait_to_complete)
3043{
3044 u32 status;
3045 u16 autoneg_status;
3046
3047 if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper)
3048 return IXGBE_ERR_CONFIG;
3049
3050 status = ixgbe_check_mac_link_generic(hw, speed, link_up,
3051 link_up_wait_to_complete);
3052
3053 /* If check link fails or MAC link is not up, then return */
3054 if (status != IXGBE_SUCCESS || !(*link_up))
3055 return status;
3056
3057 /* MAC link is up, so check external PHY link.
3058 * Read this twice back to back to indicate current status.
3059 */
3060 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
3061 IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
3062 &autoneg_status);
3063
3064 if (status != IXGBE_SUCCESS)
3065 return status;
3066
3067 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
3068 IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
3069 &autoneg_status);
3070
3071 if (status != IXGBE_SUCCESS)
3072 return status;
3073
3074 /* If external PHY link is not up, then indicate link not up */
3075 if (!(autoneg_status & IXGBE_MDIO_AUTO_NEG_LINK_STATUS))
3076 *link_up = FALSE;
3077
3078 return IXGBE_SUCCESS;
3079}
3080
3081/**
3082 * ixgbe_reset_phy_t_X550em - Performs X557 PHY reset and enables LASI
3083 * @hw: pointer to hardware structure
3084 **/
3085s32 ixgbe_reset_phy_t_X550em(struct ixgbe_hw *hw)
3086{
3087 s32 status;
3088
3089 status = ixgbe_reset_phy_generic(hw);
3090
3091 if (status != IXGBE_SUCCESS)
3092 return status;
3093
3094 /* Configure Link Status Alarm and Temperature Threshold interrupts */
3095 return ixgbe_enable_lasi_ext_t_x550em(hw);
3096}
3097
3098/**
3099 * ixgbe_led_on_t_X550em - Turns on the software controllable LEDs.
3100 * @hw: pointer to hardware structure
3101 * @led_idx: led number to turn on
3102 **/
3103s32 ixgbe_led_on_t_X550em(struct ixgbe_hw *hw, u32 led_idx)
3104{
3105 u16 phy_data;
3106
3107 DEBUGFUNC("ixgbe_led_on_t_X550em");
3108
3109 if (led_idx >= IXGBE_X557_MAX_LED_INDEX)
3110 return IXGBE_ERR_PARAM;
3111
3112 /* To turn on the LED, set mode to ON. */
3113 ixgbe_read_phy_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx,
3114 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, &phy_data);
3115 phy_data |= IXGBE_X557_LED_MANUAL_SET_MASK;
3116 ixgbe_write_phy_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx,
3117 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, phy_data);
3118
3119 return IXGBE_SUCCESS;
3120}
3121
3122/**
3123 * ixgbe_led_off_t_X550em - Turns off the software controllable LEDs.
3124 * @hw: pointer to hardware structure
3125 * @led_idx: led number to turn off
3126 **/
3127s32 ixgbe_led_off_t_X550em(struct ixgbe_hw *hw, u32 led_idx)
3128{
3129 u16 phy_data;
3130
3131 DEBUGFUNC("ixgbe_led_off_t_X550em");
3132
3133 if (led_idx >= IXGBE_X557_MAX_LED_INDEX)
3134 return IXGBE_ERR_PARAM;
3135
3136 /* To turn on the LED, set mode to ON. */
3137 ixgbe_read_phy_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx,
3138 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, &phy_data);
3139 phy_data &= ~IXGBE_X557_LED_MANUAL_SET_MASK;
3140 ixgbe_write_phy_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx,
3141 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, phy_data);
3142
3143 return IXGBE_SUCCESS;
3144}
3145
2
3 Copyright (c) 2001-2015, Intel Corporation
4 All rights reserved.
5
6 Redistribution and use in source and binary forms, with or without
7 modification, are permitted provided that the following conditions are met:
8
9 1. Redistributions of source code must retain the above copyright notice,
10 this list of conditions and the following disclaimer.
11
12 2. Redistributions in binary form must reproduce the above copyright
13 notice, this list of conditions and the following disclaimer in the
14 documentation and/or other materials provided with the distribution.
15
16 3. Neither the name of the Intel Corporation nor the names of its
17 contributors may be used to endorse or promote products derived from
18 this software without specific prior written permission.
19
20 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
21 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23 ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
24 LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
25 CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
26 SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
27 INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
28 CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
29 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
30 POSSIBILITY OF SUCH DAMAGE.
31
32******************************************************************************/
33/*$FreeBSD: stable/11/sys/dev/ixgbe/ixgbe_x550.c 295093 2016-01-31 15:14:23Z smh $*/
34
35#include "ixgbe_x550.h"
36#include "ixgbe_x540.h"
37#include "ixgbe_type.h"
38#include "ixgbe_api.h"
39#include "ixgbe_common.h"
40#include "ixgbe_phy.h"
41
42static s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed);
43
44/**
45 * ixgbe_init_ops_X550 - Inits func ptrs and MAC type
46 * @hw: pointer to hardware structure
47 *
48 * Initialize the function pointers and assign the MAC type for X550.
49 * Does not touch the hardware.
50 **/
51s32 ixgbe_init_ops_X550(struct ixgbe_hw *hw)
52{
53 struct ixgbe_mac_info *mac = &hw->mac;
54 struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
55 s32 ret_val;
56
57 DEBUGFUNC("ixgbe_init_ops_X550");
58
59 ret_val = ixgbe_init_ops_X540(hw);
60 mac->ops.dmac_config = ixgbe_dmac_config_X550;
61 mac->ops.dmac_config_tcs = ixgbe_dmac_config_tcs_X550;
62 mac->ops.dmac_update_tcs = ixgbe_dmac_update_tcs_X550;
63 mac->ops.setup_eee = ixgbe_setup_eee_X550;
64 mac->ops.set_source_address_pruning =
65 ixgbe_set_source_address_pruning_X550;
66 mac->ops.set_ethertype_anti_spoofing =
67 ixgbe_set_ethertype_anti_spoofing_X550;
68
69 mac->ops.get_rtrup2tc = ixgbe_dcb_get_rtrup2tc_generic;
70 eeprom->ops.init_params = ixgbe_init_eeprom_params_X550;
71 eeprom->ops.calc_checksum = ixgbe_calc_eeprom_checksum_X550;
72 eeprom->ops.read = ixgbe_read_ee_hostif_X550;
73 eeprom->ops.read_buffer = ixgbe_read_ee_hostif_buffer_X550;
74 eeprom->ops.write = ixgbe_write_ee_hostif_X550;
75 eeprom->ops.write_buffer = ixgbe_write_ee_hostif_buffer_X550;
76 eeprom->ops.update_checksum = ixgbe_update_eeprom_checksum_X550;
77 eeprom->ops.validate_checksum = ixgbe_validate_eeprom_checksum_X550;
78
79 mac->ops.disable_mdd = ixgbe_disable_mdd_X550;
80 mac->ops.enable_mdd = ixgbe_enable_mdd_X550;
81 mac->ops.mdd_event = ixgbe_mdd_event_X550;
82 mac->ops.restore_mdd_vf = ixgbe_restore_mdd_vf_X550;
83 mac->ops.disable_rx = ixgbe_disable_rx_x550;
84 if (hw->device_id == IXGBE_DEV_ID_X550EM_X_10G_T) {
85 hw->mac.ops.led_on = ixgbe_led_on_t_X550em;
86 hw->mac.ops.led_off = ixgbe_led_off_t_X550em;
87 }
88 return ret_val;
89}
90
91/**
92 * ixgbe_read_cs4227 - Read CS4227 register
93 * @hw: pointer to hardware structure
94 * @reg: register number to write
95 * @value: pointer to receive value read
96 *
97 * Returns status code
98 **/
99static s32 ixgbe_read_cs4227(struct ixgbe_hw *hw, u16 reg, u16 *value)
100{
101 return ixgbe_read_i2c_combined_unlocked(hw, IXGBE_CS4227, reg, value);
102}
103
104/**
105 * ixgbe_write_cs4227 - Write CS4227 register
106 * @hw: pointer to hardware structure
107 * @reg: register number to write
108 * @value: value to write to register
109 *
110 * Returns status code
111 **/
112static s32 ixgbe_write_cs4227(struct ixgbe_hw *hw, u16 reg, u16 value)
113{
114 return ixgbe_write_i2c_combined_unlocked(hw, IXGBE_CS4227, reg, value);
115}
116
117/**
118 * ixgbe_read_pe - Read register from port expander
119 * @hw: pointer to hardware structure
120 * @reg: register number to read
121 * @value: pointer to receive read value
122 *
123 * Returns status code
124 **/
125static s32 ixgbe_read_pe(struct ixgbe_hw *hw, u8 reg, u8 *value)
126{
127 s32 status;
128
129 status = ixgbe_read_i2c_byte_unlocked(hw, reg, IXGBE_PE, value);
130 if (status != IXGBE_SUCCESS)
131 ERROR_REPORT2(IXGBE_ERROR_CAUTION,
132 "port expander access failed with %d\n", status);
133 return status;
134}
135
136/**
137 * ixgbe_write_pe - Write register to port expander
138 * @hw: pointer to hardware structure
139 * @reg: register number to write
140 * @value: value to write
141 *
142 * Returns status code
143 **/
144static s32 ixgbe_write_pe(struct ixgbe_hw *hw, u8 reg, u8 value)
145{
146 s32 status;
147
148 status = ixgbe_write_i2c_byte_unlocked(hw, reg, IXGBE_PE, value);
149 if (status != IXGBE_SUCCESS)
150 ERROR_REPORT2(IXGBE_ERROR_CAUTION,
151 "port expander access failed with %d\n", status);
152 return status;
153}
154
155/**
156 * ixgbe_reset_cs4227 - Reset CS4227 using port expander
157 * @hw: pointer to hardware structure
158 *
159 * This function assumes that the caller has acquired the proper semaphore.
160 * Returns error code
161 **/
162static s32 ixgbe_reset_cs4227(struct ixgbe_hw *hw)
163{
164 s32 status;
165 u32 retry;
166 u16 value;
167 u8 reg;
168
169 /* Trigger hard reset. */
170 status = ixgbe_read_pe(hw, IXGBE_PE_OUTPUT, ®);
171 if (status != IXGBE_SUCCESS)
172 return status;
173 reg |= IXGBE_PE_BIT1;
174 status = ixgbe_write_pe(hw, IXGBE_PE_OUTPUT, reg);
175 if (status != IXGBE_SUCCESS)
176 return status;
177
178 status = ixgbe_read_pe(hw, IXGBE_PE_CONFIG, ®);
179 if (status != IXGBE_SUCCESS)
180 return status;
181 reg &= ~IXGBE_PE_BIT1;
182 status = ixgbe_write_pe(hw, IXGBE_PE_CONFIG, reg);
183 if (status != IXGBE_SUCCESS)
184 return status;
185
186 status = ixgbe_read_pe(hw, IXGBE_PE_OUTPUT, ®);
187 if (status != IXGBE_SUCCESS)
188 return status;
189 reg &= ~IXGBE_PE_BIT1;
190 status = ixgbe_write_pe(hw, IXGBE_PE_OUTPUT, reg);
191 if (status != IXGBE_SUCCESS)
192 return status;
193
194 usec_delay(IXGBE_CS4227_RESET_HOLD);
195
196 status = ixgbe_read_pe(hw, IXGBE_PE_OUTPUT, ®);
197 if (status != IXGBE_SUCCESS)
198 return status;
199 reg |= IXGBE_PE_BIT1;
200 status = ixgbe_write_pe(hw, IXGBE_PE_OUTPUT, reg);
201 if (status != IXGBE_SUCCESS)
202 return status;
203
204 /* Wait for the reset to complete. */
205 msec_delay(IXGBE_CS4227_RESET_DELAY);
206 for (retry = 0; retry < IXGBE_CS4227_RETRIES; retry++) {
207 status = ixgbe_read_cs4227(hw, IXGBE_CS4227_EFUSE_STATUS,
208 &value);
209 if (status == IXGBE_SUCCESS &&
210 value == IXGBE_CS4227_EEPROM_LOAD_OK)
211 break;
212 msec_delay(IXGBE_CS4227_CHECK_DELAY);
213 }
214 if (retry == IXGBE_CS4227_RETRIES) {
215 ERROR_REPORT1(IXGBE_ERROR_INVALID_STATE,
216 "CS4227 reset did not complete.");
217 return IXGBE_ERR_PHY;
218 }
219
220 status = ixgbe_read_cs4227(hw, IXGBE_CS4227_EEPROM_STATUS, &value);
221 if (status != IXGBE_SUCCESS ||
222 !(value & IXGBE_CS4227_EEPROM_LOAD_OK)) {
223 ERROR_REPORT1(IXGBE_ERROR_INVALID_STATE,
224 "CS4227 EEPROM did not load successfully.");
225 return IXGBE_ERR_PHY;
226 }
227
228 return IXGBE_SUCCESS;
229}
230
231/**
232 * ixgbe_check_cs4227 - Check CS4227 and reset as needed
233 * @hw: pointer to hardware structure
234 **/
235static void ixgbe_check_cs4227(struct ixgbe_hw *hw)
236{
237 s32 status = IXGBE_SUCCESS;
238 u32 swfw_mask = hw->phy.phy_semaphore_mask;
239 u16 value = 0;
240 u8 retry;
241
242 for (retry = 0; retry < IXGBE_CS4227_RETRIES; retry++) {
243 status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask);
244 if (status != IXGBE_SUCCESS) {
245 ERROR_REPORT2(IXGBE_ERROR_CAUTION,
246 "semaphore failed with %d", status);
247 msec_delay(IXGBE_CS4227_CHECK_DELAY);
248 continue;
249 }
250
251 /* Get status of reset flow. */
252 status = ixgbe_read_cs4227(hw, IXGBE_CS4227_SCRATCH, &value);
253
254 if (status == IXGBE_SUCCESS &&
255 value == IXGBE_CS4227_RESET_COMPLETE)
256 goto out;
257
258 if (status != IXGBE_SUCCESS ||
259 value != IXGBE_CS4227_RESET_PENDING)
260 break;
261
262 /* Reset is pending. Wait and check again. */
263 hw->mac.ops.release_swfw_sync(hw, swfw_mask);
264 msec_delay(IXGBE_CS4227_CHECK_DELAY);
265 }
266
267 /* If still pending, assume other instance failed. */
268 if (retry == IXGBE_CS4227_RETRIES) {
269 status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask);
270 if (status != IXGBE_SUCCESS) {
271 ERROR_REPORT2(IXGBE_ERROR_CAUTION,
272 "semaphore failed with %d", status);
273 return;
274 }
275 }
276
277 /* Reset the CS4227. */
278 status = ixgbe_reset_cs4227(hw);
279 if (status != IXGBE_SUCCESS) {
280 ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
281 "CS4227 reset failed: %d", status);
282 goto out;
283 }
284
285 /* Reset takes so long, temporarily release semaphore in case the
286 * other driver instance is waiting for the reset indication.
287 */
288 ixgbe_write_cs4227(hw, IXGBE_CS4227_SCRATCH,
289 IXGBE_CS4227_RESET_PENDING);
290 hw->mac.ops.release_swfw_sync(hw, swfw_mask);
291 msec_delay(10);
292 status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask);
293 if (status != IXGBE_SUCCESS) {
294 ERROR_REPORT2(IXGBE_ERROR_CAUTION,
295 "semaphore failed with %d", status);
296 return;
297 }
298
299 /* Record completion for next time. */
300 status = ixgbe_write_cs4227(hw, IXGBE_CS4227_SCRATCH,
301 IXGBE_CS4227_RESET_COMPLETE);
302
303out:
304 hw->mac.ops.release_swfw_sync(hw, swfw_mask);
305 msec_delay(hw->eeprom.semaphore_delay);
306}
307
308/**
309 * ixgbe_setup_mux_ctl - Setup ESDP register for I2C mux control
310 * @hw: pointer to hardware structure
311 **/
312static void ixgbe_setup_mux_ctl(struct ixgbe_hw *hw)
313{
314 u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
315
316 if (hw->bus.lan_id) {
317 esdp &= ~(IXGBE_ESDP_SDP1_NATIVE | IXGBE_ESDP_SDP1);
318 esdp |= IXGBE_ESDP_SDP1_DIR;
319 }
320 esdp &= ~(IXGBE_ESDP_SDP0_NATIVE | IXGBE_ESDP_SDP0_DIR);
321 IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
322 IXGBE_WRITE_FLUSH(hw);
323}
324
325/**
326 * ixgbe_identify_phy_x550em - Get PHY type based on device id
327 * @hw: pointer to hardware structure
328 *
329 * Returns error code
330 */
331static s32 ixgbe_identify_phy_x550em(struct ixgbe_hw *hw)
332{
333 switch (hw->device_id) {
334 case IXGBE_DEV_ID_X550EM_X_SFP:
335 /* set up for CS4227 usage */
336 hw->phy.phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM;
337 ixgbe_setup_mux_ctl(hw);
338 ixgbe_check_cs4227(hw);
339
340 return ixgbe_identify_module_generic(hw);
341 break;
342 case IXGBE_DEV_ID_X550EM_X_KX4:
343 hw->phy.type = ixgbe_phy_x550em_kx4;
344 break;
345 case IXGBE_DEV_ID_X550EM_X_KR:
346 hw->phy.type = ixgbe_phy_x550em_kr;
347 break;
348 case IXGBE_DEV_ID_X550EM_X_1G_T:
349 case IXGBE_DEV_ID_X550EM_X_10G_T:
350 return ixgbe_identify_phy_generic(hw);
351 default:
352 break;
353 }
354 return IXGBE_SUCCESS;
355}
356
357static s32 ixgbe_read_phy_reg_x550em(struct ixgbe_hw *hw, u32 reg_addr,
358 u32 device_type, u16 *phy_data)
359{
360 UNREFERENCED_4PARAMETER(*hw, reg_addr, device_type, *phy_data);
361 return IXGBE_NOT_IMPLEMENTED;
362}
363
364static s32 ixgbe_write_phy_reg_x550em(struct ixgbe_hw *hw, u32 reg_addr,
365 u32 device_type, u16 phy_data)
366{
367 UNREFERENCED_4PARAMETER(*hw, reg_addr, device_type, phy_data);
368 return IXGBE_NOT_IMPLEMENTED;
369}
370
371/**
372* ixgbe_init_ops_X550EM - Inits func ptrs and MAC type
373* @hw: pointer to hardware structure
374*
375* Initialize the function pointers and for MAC type X550EM.
376* Does not touch the hardware.
377**/
378s32 ixgbe_init_ops_X550EM(struct ixgbe_hw *hw)
379{
380 struct ixgbe_mac_info *mac = &hw->mac;
381 struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
382 struct ixgbe_phy_info *phy = &hw->phy;
383 s32 ret_val;
384
385 DEBUGFUNC("ixgbe_init_ops_X550EM");
386
387 /* Similar to X550 so start there. */
388 ret_val = ixgbe_init_ops_X550(hw);
389
390 /* Since this function eventually calls
391 * ixgbe_init_ops_540 by design, we are setting
392 * the pointers to NULL explicitly here to overwrite
393 * the values being set in the x540 function.
394 */
395
396 /* FCOE not supported in x550EM */
397 mac->ops.get_san_mac_addr = NULL;
398 mac->ops.set_san_mac_addr = NULL;
399 mac->ops.get_wwn_prefix = NULL;
400 mac->ops.get_fcoe_boot_status = NULL;
401
402 /* IPsec not supported in x550EM */
403 mac->ops.disable_sec_rx_path = NULL;
404 mac->ops.enable_sec_rx_path = NULL;
405
406 /* AUTOC register is not present in x550EM. */
407 mac->ops.prot_autoc_read = NULL;
408 mac->ops.prot_autoc_write = NULL;
409
410 /* X550EM bus type is internal*/
411 hw->bus.type = ixgbe_bus_type_internal;
412 mac->ops.get_bus_info = ixgbe_get_bus_info_X550em;
413
414 if (hw->mac.type == ixgbe_mac_X550EM_x) {
415 mac->ops.read_iosf_sb_reg = ixgbe_read_iosf_sb_reg_x550;
416 mac->ops.write_iosf_sb_reg = ixgbe_write_iosf_sb_reg_x550;
417 }
418
419 mac->ops.get_media_type = ixgbe_get_media_type_X550em;
420 mac->ops.setup_sfp = ixgbe_setup_sfp_modules_X550em;
421 mac->ops.get_link_capabilities = ixgbe_get_link_capabilities_X550em;
422 mac->ops.reset_hw = ixgbe_reset_hw_X550em;
423 mac->ops.get_supported_physical_layer =
424 ixgbe_get_supported_physical_layer_X550em;
425
426 if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper)
427 mac->ops.setup_fc = ixgbe_setup_fc_generic;
428 else
429 mac->ops.setup_fc = ixgbe_setup_fc_X550em;
430
431 mac->ops.acquire_swfw_sync = ixgbe_acquire_swfw_sync_X550em;
432 mac->ops.release_swfw_sync = ixgbe_release_swfw_sync_X550em;
433
434 if (hw->device_id != IXGBE_DEV_ID_X550EM_X_KR)
435 mac->ops.setup_eee = NULL;
436
437 /* PHY */
438 phy->ops.init = ixgbe_init_phy_ops_X550em;
439 phy->ops.identify = ixgbe_identify_phy_x550em;
440 if (mac->ops.get_media_type(hw) != ixgbe_media_type_copper)
441 phy->ops.set_phy_power = NULL;
442
443
444 /* EEPROM */
445 eeprom->ops.init_params = ixgbe_init_eeprom_params_X540;
446 eeprom->ops.read = ixgbe_read_ee_hostif_X550;
447 eeprom->ops.read_buffer = ixgbe_read_ee_hostif_buffer_X550;
448 eeprom->ops.write = ixgbe_write_ee_hostif_X550;
449 eeprom->ops.write_buffer = ixgbe_write_ee_hostif_buffer_X550;
450 eeprom->ops.update_checksum = ixgbe_update_eeprom_checksum_X550;
451 eeprom->ops.validate_checksum = ixgbe_validate_eeprom_checksum_X550;
452 eeprom->ops.calc_checksum = ixgbe_calc_eeprom_checksum_X550;
453
454 return ret_val;
455}
456
457/**
458 * ixgbe_dmac_config_X550
459 * @hw: pointer to hardware structure
460 *
461 * Configure DMA coalescing. If enabling dmac, dmac is activated.
462 * When disabling dmac, dmac enable dmac bit is cleared.
463 **/
464s32 ixgbe_dmac_config_X550(struct ixgbe_hw *hw)
465{
466 u32 reg, high_pri_tc;
467
468 DEBUGFUNC("ixgbe_dmac_config_X550");
469
470 /* Disable DMA coalescing before configuring */
471 reg = IXGBE_READ_REG(hw, IXGBE_DMACR);
472 reg &= ~IXGBE_DMACR_DMAC_EN;
473 IXGBE_WRITE_REG(hw, IXGBE_DMACR, reg);
474
475 /* Disable DMA Coalescing if the watchdog timer is 0 */
476 if (!hw->mac.dmac_config.watchdog_timer)
477 goto out;
478
479 ixgbe_dmac_config_tcs_X550(hw);
480
481 /* Configure DMA Coalescing Control Register */
482 reg = IXGBE_READ_REG(hw, IXGBE_DMACR);
483
484 /* Set the watchdog timer in units of 40.96 usec */
485 reg &= ~IXGBE_DMACR_DMACWT_MASK;
486 reg |= (hw->mac.dmac_config.watchdog_timer * 100) / 4096;
487
488 reg &= ~IXGBE_DMACR_HIGH_PRI_TC_MASK;
489 /* If fcoe is enabled, set high priority traffic class */
490 if (hw->mac.dmac_config.fcoe_en) {
491 high_pri_tc = 1 << hw->mac.dmac_config.fcoe_tc;
492 reg |= ((high_pri_tc << IXGBE_DMACR_HIGH_PRI_TC_SHIFT) &
493 IXGBE_DMACR_HIGH_PRI_TC_MASK);
494 }
495 reg |= IXGBE_DMACR_EN_MNG_IND;
496
497 /* Enable DMA coalescing after configuration */
498 reg |= IXGBE_DMACR_DMAC_EN;
499 IXGBE_WRITE_REG(hw, IXGBE_DMACR, reg);
500
501out:
502 return IXGBE_SUCCESS;
503}
504
505/**
506 * ixgbe_dmac_config_tcs_X550
507 * @hw: pointer to hardware structure
508 *
509 * Configure DMA coalescing threshold per TC. The dmac enable bit must
510 * be cleared before configuring.
511 **/
512s32 ixgbe_dmac_config_tcs_X550(struct ixgbe_hw *hw)
513{
514 u32 tc, reg, pb_headroom, rx_pb_size, maxframe_size_kb;
515
516 DEBUGFUNC("ixgbe_dmac_config_tcs_X550");
517
518 /* Configure DMA coalescing enabled */
519 switch (hw->mac.dmac_config.link_speed) {
520 case IXGBE_LINK_SPEED_100_FULL:
521 pb_headroom = IXGBE_DMACRXT_100M;
522 break;
523 case IXGBE_LINK_SPEED_1GB_FULL:
524 pb_headroom = IXGBE_DMACRXT_1G;
525 break;
526 default:
527 pb_headroom = IXGBE_DMACRXT_10G;
528 break;
529 }
530
531 maxframe_size_kb = ((IXGBE_READ_REG(hw, IXGBE_MAXFRS) >>
532 IXGBE_MHADD_MFS_SHIFT) / 1024);
533
534 /* Set the per Rx packet buffer receive threshold */
535 for (tc = 0; tc < IXGBE_DCB_MAX_TRAFFIC_CLASS; tc++) {
536 reg = IXGBE_READ_REG(hw, IXGBE_DMCTH(tc));
537 reg &= ~IXGBE_DMCTH_DMACRXT_MASK;
538
539 if (tc < hw->mac.dmac_config.num_tcs) {
540 /* Get Rx PB size */
541 rx_pb_size = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(tc));
542 rx_pb_size = (rx_pb_size & IXGBE_RXPBSIZE_MASK) >>
543 IXGBE_RXPBSIZE_SHIFT;
544
545 /* Calculate receive buffer threshold in kilobytes */
546 if (rx_pb_size > pb_headroom)
547 rx_pb_size = rx_pb_size - pb_headroom;
548 else
549 rx_pb_size = 0;
550
551 /* Minimum of MFS shall be set for DMCTH */
552 reg |= (rx_pb_size > maxframe_size_kb) ?
553 rx_pb_size : maxframe_size_kb;
554 }
555 IXGBE_WRITE_REG(hw, IXGBE_DMCTH(tc), reg);
556 }
557 return IXGBE_SUCCESS;
558}
559
560/**
561 * ixgbe_dmac_update_tcs_X550
562 * @hw: pointer to hardware structure
563 *
564 * Disables dmac, updates per TC settings, and then enables dmac.
565 **/
566s32 ixgbe_dmac_update_tcs_X550(struct ixgbe_hw *hw)
567{
568 u32 reg;
569
570 DEBUGFUNC("ixgbe_dmac_update_tcs_X550");
571
572 /* Disable DMA coalescing before configuring */
573 reg = IXGBE_READ_REG(hw, IXGBE_DMACR);
574 reg &= ~IXGBE_DMACR_DMAC_EN;
575 IXGBE_WRITE_REG(hw, IXGBE_DMACR, reg);
576
577 ixgbe_dmac_config_tcs_X550(hw);
578
579 /* Enable DMA coalescing after configuration */
580 reg = IXGBE_READ_REG(hw, IXGBE_DMACR);
581 reg |= IXGBE_DMACR_DMAC_EN;
582 IXGBE_WRITE_REG(hw, IXGBE_DMACR, reg);
583
584 return IXGBE_SUCCESS;
585}
586
587/**
588 * ixgbe_init_eeprom_params_X550 - Initialize EEPROM params
589 * @hw: pointer to hardware structure
590 *
591 * Initializes the EEPROM parameters ixgbe_eeprom_info within the
592 * ixgbe_hw struct in order to set up EEPROM access.
593 **/
594s32 ixgbe_init_eeprom_params_X550(struct ixgbe_hw *hw)
595{
596 struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
597 u32 eec;
598 u16 eeprom_size;
599
600 DEBUGFUNC("ixgbe_init_eeprom_params_X550");
601
602 if (eeprom->type == ixgbe_eeprom_uninitialized) {
603 eeprom->semaphore_delay = 10;
604 eeprom->type = ixgbe_flash;
605
606 eec = IXGBE_READ_REG(hw, IXGBE_EEC);
607 eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >>
608 IXGBE_EEC_SIZE_SHIFT);
609 eeprom->word_size = 1 << (eeprom_size +
610 IXGBE_EEPROM_WORD_SIZE_SHIFT);
611
612 DEBUGOUT2("Eeprom params: type = %d, size = %d\n",
613 eeprom->type, eeprom->word_size);
614 }
615
616 return IXGBE_SUCCESS;
617}
618
619/**
620 * ixgbe_setup_eee_X550 - Enable/disable EEE support
621 * @hw: pointer to the HW structure
622 * @enable_eee: boolean flag to enable EEE
623 *
624 * Enable/disable EEE based on enable_eee flag.
625 * Auto-negotiation must be started after BASE-T EEE bits in PHY register 7.3C
626 * are modified.
627 *
628 **/
629s32 ixgbe_setup_eee_X550(struct ixgbe_hw *hw, bool enable_eee)
630{
631 u32 eeer;
632 u16 autoneg_eee_reg;
633 u32 link_reg;
634 s32 status;
635 u32 fuse;
636
637 DEBUGFUNC("ixgbe_setup_eee_X550");
638
639 eeer = IXGBE_READ_REG(hw, IXGBE_EEER);
640 /* Enable or disable EEE per flag */
641 if (enable_eee) {
642 eeer |= (IXGBE_EEER_TX_LPI_EN | IXGBE_EEER_RX_LPI_EN);
643
644 if (hw->mac.type == ixgbe_mac_X550) {
645 /* Advertise EEE capability */
646 hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_EEE_ADVT,
647 IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_eee_reg);
648
649 autoneg_eee_reg |= (IXGBE_AUTO_NEG_10GBASE_EEE_ADVT |
650 IXGBE_AUTO_NEG_1000BASE_EEE_ADVT |
651 IXGBE_AUTO_NEG_100BASE_EEE_ADVT);
652
653 hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_EEE_ADVT,
654 IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_eee_reg);
655 } else if (hw->device_id == IXGBE_DEV_ID_X550EM_X_KR) {
656 /* Not supported on first revision. */
657 fuse = IXGBE_READ_REG(hw, IXGBE_FUSES0_GROUP(0));
658 if (!(fuse & IXGBE_FUSES0_REV1))
659 return IXGBE_SUCCESS;
660
661 status = ixgbe_read_iosf_sb_reg_x550(hw,
662 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
663 IXGBE_SB_IOSF_TARGET_KR_PHY, &link_reg);
664 if (status != IXGBE_SUCCESS)
665 return status;
666
667 link_reg |= IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KR |
668 IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KX;
669
670 /* Don't advertise FEC capability when EEE enabled. */
671 link_reg &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_FEC;
672
673 status = ixgbe_write_iosf_sb_reg_x550(hw,
674 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
675 IXGBE_SB_IOSF_TARGET_KR_PHY, link_reg);
676 if (status != IXGBE_SUCCESS)
677 return status;
678 }
679 } else {
680 eeer &= ~(IXGBE_EEER_TX_LPI_EN | IXGBE_EEER_RX_LPI_EN);
681
682 if (hw->mac.type == ixgbe_mac_X550) {
683 /* Disable advertised EEE capability */
684 hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_EEE_ADVT,
685 IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_eee_reg);
686
687 autoneg_eee_reg &= ~(IXGBE_AUTO_NEG_10GBASE_EEE_ADVT |
688 IXGBE_AUTO_NEG_1000BASE_EEE_ADVT |
689 IXGBE_AUTO_NEG_100BASE_EEE_ADVT);
690
691 hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_EEE_ADVT,
692 IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_eee_reg);
693 } else if (hw->device_id == IXGBE_DEV_ID_X550EM_X_KR) {
694 status = ixgbe_read_iosf_sb_reg_x550(hw,
695 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
696 IXGBE_SB_IOSF_TARGET_KR_PHY, &link_reg);
697 if (status != IXGBE_SUCCESS)
698 return status;
699
700 link_reg &= ~(IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KR |
701 IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KX);
702
703 /* Advertise FEC capability when EEE is disabled. */
704 link_reg |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_FEC;
705
706 status = ixgbe_write_iosf_sb_reg_x550(hw,
707 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
708 IXGBE_SB_IOSF_TARGET_KR_PHY, link_reg);
709 if (status != IXGBE_SUCCESS)
710 return status;
711 }
712 }
713 IXGBE_WRITE_REG(hw, IXGBE_EEER, eeer);
714
715 return IXGBE_SUCCESS;
716}
717
718/**
719 * ixgbe_set_source_address_pruning_X550 - Enable/Disbale source address pruning
720 * @hw: pointer to hardware structure
721 * @enable: enable or disable source address pruning
722 * @pool: Rx pool to set source address pruning for
723 **/
724void ixgbe_set_source_address_pruning_X550(struct ixgbe_hw *hw, bool enable,
725 unsigned int pool)
726{
727 u64 pfflp;
728
729 /* max rx pool is 63 */
730 if (pool > 63)
731 return;
732
733 pfflp = (u64)IXGBE_READ_REG(hw, IXGBE_PFFLPL);
734 pfflp |= (u64)IXGBE_READ_REG(hw, IXGBE_PFFLPH) << 32;
735
736 if (enable)
737 pfflp |= (1ULL << pool);
738 else
739 pfflp &= ~(1ULL << pool);
740
741 IXGBE_WRITE_REG(hw, IXGBE_PFFLPL, (u32)pfflp);
742 IXGBE_WRITE_REG(hw, IXGBE_PFFLPH, (u32)(pfflp >> 32));
743}
744
745/**
746 * ixgbe_set_ethertype_anti_spoofing_X550 - Enable/Disable Ethertype anti-spoofing
747 * @hw: pointer to hardware structure
748 * @enable: enable or disable switch for Ethertype anti-spoofing
749 * @vf: Virtual Function pool - VF Pool to set for Ethertype anti-spoofing
750 *
751 **/
752void ixgbe_set_ethertype_anti_spoofing_X550(struct ixgbe_hw *hw,
753 bool enable, int vf)
754{
755 int vf_target_reg = vf >> 3;
756 int vf_target_shift = vf % 8 + IXGBE_SPOOF_ETHERTYPEAS_SHIFT;
757 u32 pfvfspoof;
758
759 DEBUGFUNC("ixgbe_set_ethertype_anti_spoofing_X550");
760
761 pfvfspoof = IXGBE_READ_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg));
762 if (enable)
763 pfvfspoof |= (1 << vf_target_shift);
764 else
765 pfvfspoof &= ~(1 << vf_target_shift);
766
767 IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg), pfvfspoof);
768}
769
770/**
771 * ixgbe_iosf_wait - Wait for IOSF command completion
772 * @hw: pointer to hardware structure
773 * @ctrl: pointer to location to receive final IOSF control value
774 *
775 * Returns failing status on timeout
776 *
777 * Note: ctrl can be NULL if the IOSF control register value is not needed
778 **/
779static s32 ixgbe_iosf_wait(struct ixgbe_hw *hw, u32 *ctrl)
780{
781 u32 i, command = 0;
782
783 /* Check every 10 usec to see if the address cycle completed.
784 * The SB IOSF BUSY bit will clear when the operation is
785 * complete
786 */
787 for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
788 command = IXGBE_READ_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL);
789 if ((command & IXGBE_SB_IOSF_CTRL_BUSY) == 0)
790 break;
791 usec_delay(10);
792 }
793 if (ctrl)
794 *ctrl = command;
795 if (i == IXGBE_MDIO_COMMAND_TIMEOUT) {
796 ERROR_REPORT1(IXGBE_ERROR_POLLING, "Wait timed out\n");
797 return IXGBE_ERR_PHY;
798 }
799
800 return IXGBE_SUCCESS;
801}
802
803/**
804 * ixgbe_write_iosf_sb_reg_x550 - Writes a value to specified register of the IOSF
805 * device
806 * @hw: pointer to hardware structure
807 * @reg_addr: 32 bit PHY register to write
808 * @device_type: 3 bit device type
809 * @data: Data to write to the register
810 **/
811s32 ixgbe_write_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr,
812 u32 device_type, u32 data)
813{
814 u32 gssr = IXGBE_GSSR_PHY1_SM | IXGBE_GSSR_PHY0_SM;
815 u32 command, error;
816 s32 ret;
817
818 ret = ixgbe_acquire_swfw_semaphore(hw, gssr);
819 if (ret != IXGBE_SUCCESS)
820 return ret;
821
822 ret = ixgbe_iosf_wait(hw, NULL);
823 if (ret != IXGBE_SUCCESS)
824 goto out;
825
826 command = ((reg_addr << IXGBE_SB_IOSF_CTRL_ADDR_SHIFT) |
827 (device_type << IXGBE_SB_IOSF_CTRL_TARGET_SELECT_SHIFT));
828
829 /* Write IOSF control register */
830 IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL, command);
831
832 /* Write IOSF data register */
833 IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_DATA, data);
834
835 ret = ixgbe_iosf_wait(hw, &command);
836
837 if ((command & IXGBE_SB_IOSF_CTRL_RESP_STAT_MASK) != 0) {
838 error = (command & IXGBE_SB_IOSF_CTRL_CMPL_ERR_MASK) >>
839 IXGBE_SB_IOSF_CTRL_CMPL_ERR_SHIFT;
840 ERROR_REPORT2(IXGBE_ERROR_POLLING,
841 "Failed to write, error %x\n", error);
842 ret = IXGBE_ERR_PHY;
843 }
844
845out:
846 ixgbe_release_swfw_semaphore(hw, gssr);
847 return ret;
848}
849
850/**
851 * ixgbe_read_iosf_sb_reg_x550 - Writes a value to specified register of the IOSF
852 * device
853 * @hw: pointer to hardware structure
854 * @reg_addr: 32 bit PHY register to write
855 * @device_type: 3 bit device type
856 * @phy_data: Pointer to read data from the register
857 **/
858s32 ixgbe_read_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr,
859 u32 device_type, u32 *data)
860{
861 u32 gssr = IXGBE_GSSR_PHY1_SM | IXGBE_GSSR_PHY0_SM;
862 u32 command, error;
863 s32 ret;
864
865 ret = ixgbe_acquire_swfw_semaphore(hw, gssr);
866 if (ret != IXGBE_SUCCESS)
867 return ret;
868
869 ret = ixgbe_iosf_wait(hw, NULL);
870 if (ret != IXGBE_SUCCESS)
871 goto out;
872
873 command = ((reg_addr << IXGBE_SB_IOSF_CTRL_ADDR_SHIFT) |
874 (device_type << IXGBE_SB_IOSF_CTRL_TARGET_SELECT_SHIFT));
875
876 /* Write IOSF control register */
877 IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL, command);
878
879 ret = ixgbe_iosf_wait(hw, &command);
880
881 if ((command & IXGBE_SB_IOSF_CTRL_RESP_STAT_MASK) != 0) {
882 error = (command & IXGBE_SB_IOSF_CTRL_CMPL_ERR_MASK) >>
883 IXGBE_SB_IOSF_CTRL_CMPL_ERR_SHIFT;
884 ERROR_REPORT2(IXGBE_ERROR_POLLING,
885 "Failed to read, error %x\n", error);
886 ret = IXGBE_ERR_PHY;
887 }
888
889 if (ret == IXGBE_SUCCESS)
890 *data = IXGBE_READ_REG(hw, IXGBE_SB_IOSF_INDIRECT_DATA);
891
892out:
893 ixgbe_release_swfw_semaphore(hw, gssr);
894 return ret;
895}
896
897/**
898 * ixgbe_disable_mdd_X550
899 * @hw: pointer to hardware structure
900 *
901 * Disable malicious driver detection
902 **/
903void ixgbe_disable_mdd_X550(struct ixgbe_hw *hw)
904{
905 u32 reg;
906
907 DEBUGFUNC("ixgbe_disable_mdd_X550");
908
909 /* Disable MDD for TX DMA and interrupt */
910 reg = IXGBE_READ_REG(hw, IXGBE_DMATXCTL);
911 reg &= ~(IXGBE_DMATXCTL_MDP_EN | IXGBE_DMATXCTL_MBINTEN);
912 IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL, reg);
913
914 /* Disable MDD for RX and interrupt */
915 reg = IXGBE_READ_REG(hw, IXGBE_RDRXCTL);
916 reg &= ~(IXGBE_RDRXCTL_MDP_EN | IXGBE_RDRXCTL_MBINTEN);
917 IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, reg);
918}
919
920/**
921 * ixgbe_enable_mdd_X550
922 * @hw: pointer to hardware structure
923 *
924 * Enable malicious driver detection
925 **/
926void ixgbe_enable_mdd_X550(struct ixgbe_hw *hw)
927{
928 u32 reg;
929
930 DEBUGFUNC("ixgbe_enable_mdd_X550");
931
932 /* Enable MDD for TX DMA and interrupt */
933 reg = IXGBE_READ_REG(hw, IXGBE_DMATXCTL);
934 reg |= (IXGBE_DMATXCTL_MDP_EN | IXGBE_DMATXCTL_MBINTEN);
935 IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL, reg);
936
937 /* Enable MDD for RX and interrupt */
938 reg = IXGBE_READ_REG(hw, IXGBE_RDRXCTL);
939 reg |= (IXGBE_RDRXCTL_MDP_EN | IXGBE_RDRXCTL_MBINTEN);
940 IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, reg);
941}
942
943/**
944 * ixgbe_restore_mdd_vf_X550
945 * @hw: pointer to hardware structure
946 * @vf: vf index
947 *
948 * Restore VF that was disabled during malicious driver detection event
949 **/
950void ixgbe_restore_mdd_vf_X550(struct ixgbe_hw *hw, u32 vf)
951{
952 u32 idx, reg, num_qs, start_q, bitmask;
953
954 DEBUGFUNC("ixgbe_restore_mdd_vf_X550");
955
956 /* Map VF to queues */
957 reg = IXGBE_READ_REG(hw, IXGBE_MRQC);
958 switch (reg & IXGBE_MRQC_MRQE_MASK) {
959 case IXGBE_MRQC_VMDQRT8TCEN:
960 num_qs = 8; /* 16 VFs / pools */
961 bitmask = 0x000000FF;
962 break;
963 case IXGBE_MRQC_VMDQRSS32EN:
964 case IXGBE_MRQC_VMDQRT4TCEN:
965 num_qs = 4; /* 32 VFs / pools */
966 bitmask = 0x0000000F;
967 break;
968 default: /* 64 VFs / pools */
969 num_qs = 2;
970 bitmask = 0x00000003;
971 break;
972 }
973 start_q = vf * num_qs;
974
975 /* Release vf's queues by clearing WQBR_TX and WQBR_RX (RW1C) */
976 idx = start_q / 32;
977 reg = 0;
978 reg |= (bitmask << (start_q % 32));
979 IXGBE_WRITE_REG(hw, IXGBE_WQBR_TX(idx), reg);
980 IXGBE_WRITE_REG(hw, IXGBE_WQBR_RX(idx), reg);
981}
982
983/**
984 * ixgbe_mdd_event_X550
985 * @hw: pointer to hardware structure
986 * @vf_bitmap: vf bitmap of malicious vfs
987 *
988 * Handle malicious driver detection event.
989 **/
990void ixgbe_mdd_event_X550(struct ixgbe_hw *hw, u32 *vf_bitmap)
991{
992 u32 wqbr;
993 u32 i, j, reg, q, shift, vf, idx;
994
995 DEBUGFUNC("ixgbe_mdd_event_X550");
996
997 /* figure out pool size for mapping to vf's */
998 reg = IXGBE_READ_REG(hw, IXGBE_MRQC);
999 switch (reg & IXGBE_MRQC_MRQE_MASK) {
1000 case IXGBE_MRQC_VMDQRT8TCEN:
1001 shift = 3; /* 16 VFs / pools */
1002 break;
1003 case IXGBE_MRQC_VMDQRSS32EN:
1004 case IXGBE_MRQC_VMDQRT4TCEN:
1005 shift = 2; /* 32 VFs / pools */
1006 break;
1007 default:
1008 shift = 1; /* 64 VFs / pools */
1009 break;
1010 }
1011
1012 /* Read WQBR_TX and WQBR_RX and check for malicious queues */
1013 for (i = 0; i < 4; i++) {
1014 wqbr = IXGBE_READ_REG(hw, IXGBE_WQBR_TX(i));
1015 wqbr |= IXGBE_READ_REG(hw, IXGBE_WQBR_RX(i));
1016
1017 if (!wqbr)
1018 continue;
1019
1020 /* Get malicious queue */
1021 for (j = 0; j < 32 && wqbr; j++) {
1022
1023 if (!(wqbr & (1 << j)))
1024 continue;
1025
1026 /* Get queue from bitmask */
1027 q = j + (i * 32);
1028
1029 /* Map queue to vf */
1030 vf = (q >> shift);
1031
1032 /* Set vf bit in vf_bitmap */
1033 idx = vf / 32;
1034 vf_bitmap[idx] |= (1 << (vf % 32));
1035 wqbr &= ~(1 << j);
1036 }
1037 }
1038}
1039
1040/**
1041 * ixgbe_get_media_type_X550em - Get media type
1042 * @hw: pointer to hardware structure
1043 *
1044 * Returns the media type (fiber, copper, backplane)
1045 */
1046enum ixgbe_media_type ixgbe_get_media_type_X550em(struct ixgbe_hw *hw)
1047{
1048 enum ixgbe_media_type media_type;
1049
1050 DEBUGFUNC("ixgbe_get_media_type_X550em");
1051
1052 /* Detect if there is a copper PHY attached. */
1053 switch (hw->device_id) {
1054 case IXGBE_DEV_ID_X550EM_X_KR:
1055 case IXGBE_DEV_ID_X550EM_X_KX4:
1056 media_type = ixgbe_media_type_backplane;
1057 break;
1058 case IXGBE_DEV_ID_X550EM_X_SFP:
1059 media_type = ixgbe_media_type_fiber;
1060 break;
1061 case IXGBE_DEV_ID_X550EM_X_1G_T:
1062 case IXGBE_DEV_ID_X550EM_X_10G_T:
1063 media_type = ixgbe_media_type_copper;
1064 break;
1065 default:
1066 media_type = ixgbe_media_type_unknown;
1067 break;
1068 }
1069 return media_type;
1070}
1071
1072/**
1073 * ixgbe_supported_sfp_modules_X550em - Check if SFP module type is supported
1074 * @hw: pointer to hardware structure
1075 * @linear: TRUE if SFP module is linear
1076 */
1077static s32 ixgbe_supported_sfp_modules_X550em(struct ixgbe_hw *hw, bool *linear)
1078{
1079 DEBUGFUNC("ixgbe_supported_sfp_modules_X550em");
1080
1081 switch (hw->phy.sfp_type) {
1082 case ixgbe_sfp_type_not_present:
1083 return IXGBE_ERR_SFP_NOT_PRESENT;
1084 case ixgbe_sfp_type_da_cu_core0:
1085 case ixgbe_sfp_type_da_cu_core1:
1086 *linear = TRUE;
1087 break;
1088 case ixgbe_sfp_type_srlr_core0:
1089 case ixgbe_sfp_type_srlr_core1:
1090 case ixgbe_sfp_type_da_act_lmt_core0:
1091 case ixgbe_sfp_type_da_act_lmt_core1:
1092 case ixgbe_sfp_type_1g_sx_core0:
1093 case ixgbe_sfp_type_1g_sx_core1:
1094 case ixgbe_sfp_type_1g_lx_core0:
1095 case ixgbe_sfp_type_1g_lx_core1:
1096 *linear = FALSE;
1097 break;
1098 case ixgbe_sfp_type_unknown:
1099 case ixgbe_sfp_type_1g_cu_core0:
1100 case ixgbe_sfp_type_1g_cu_core1:
1101 default:
1102 return IXGBE_ERR_SFP_NOT_SUPPORTED;
1103 }
1104
1105 return IXGBE_SUCCESS;
1106}
1107
1108/**
1109 * ixgbe_identify_sfp_module_X550em - Identifies SFP modules
1110 * @hw: pointer to hardware structure
1111 *
1112 * Searches for and identifies the SFP module and assigns appropriate PHY type.
1113 **/
1114s32 ixgbe_identify_sfp_module_X550em(struct ixgbe_hw *hw)
1115{
1116 s32 status;
1117 bool linear;
1118
1119 DEBUGFUNC("ixgbe_identify_sfp_module_X550em");
1120
1121 status = ixgbe_identify_module_generic(hw);
1122
1123 if (status != IXGBE_SUCCESS)
1124 return status;
1125
1126 /* Check if SFP module is supported */
1127 status = ixgbe_supported_sfp_modules_X550em(hw, &linear);
1128
1129 return status;
1130}
1131
1132/**
1133 * ixgbe_setup_sfp_modules_X550em - Setup MAC link ops
1134 * @hw: pointer to hardware structure
1135 */
1136s32 ixgbe_setup_sfp_modules_X550em(struct ixgbe_hw *hw)
1137{
1138 s32 status;
1139 bool linear;
1140
1141 DEBUGFUNC("ixgbe_setup_sfp_modules_X550em");
1142
1143 /* Check if SFP module is supported */
1144 status = ixgbe_supported_sfp_modules_X550em(hw, &linear);
1145
1146 if (status != IXGBE_SUCCESS)
1147 return status;
1148
1149 ixgbe_init_mac_link_ops_X550em(hw);
1150 hw->phy.ops.reset = NULL;
1151
1152 return IXGBE_SUCCESS;
1153}
1154
1155/**
1156 * ixgbe_init_mac_link_ops_X550em - init mac link function pointers
1157 * @hw: pointer to hardware structure
1158 */
1159void ixgbe_init_mac_link_ops_X550em(struct ixgbe_hw *hw)
1160{
1161 struct ixgbe_mac_info *mac = &hw->mac;
1162
1163 DEBUGFUNC("ixgbe_init_mac_link_ops_X550em");
1164
1165 switch (hw->mac.ops.get_media_type(hw)) {
1166 case ixgbe_media_type_fiber:
1167 /* CS4227 does not support autoneg, so disable the laser control
1168 * functions for SFP+ fiber
1169 */
1170 mac->ops.disable_tx_laser = NULL;
1171 mac->ops.enable_tx_laser = NULL;
1172 mac->ops.flap_tx_laser = NULL;
1173 mac->ops.setup_link = ixgbe_setup_mac_link_multispeed_fiber;
1174 mac->ops.setup_mac_link = ixgbe_setup_mac_link_sfp_x550em;
1175 mac->ops.set_rate_select_speed =
1176 ixgbe_set_soft_rate_select_speed;
1177 break;
1178 case ixgbe_media_type_copper:
1179 mac->ops.setup_link = ixgbe_setup_mac_link_t_X550em;
1180 mac->ops.check_link = ixgbe_check_link_t_X550em;
1181 break;
1182 default:
1183 break;
1184 }
1185}
1186
1187/**
1188 * ixgbe_get_link_capabilities_x550em - Determines link capabilities
1189 * @hw: pointer to hardware structure
1190 * @speed: pointer to link speed
1191 * @autoneg: TRUE when autoneg or autotry is enabled
1192 */
1193s32 ixgbe_get_link_capabilities_X550em(struct ixgbe_hw *hw,
1194 ixgbe_link_speed *speed,
1195 bool *autoneg)
1196{
1197 DEBUGFUNC("ixgbe_get_link_capabilities_X550em");
1198
1199 /* SFP */
1200 if (hw->phy.media_type == ixgbe_media_type_fiber) {
1201
1202 /* CS4227 SFP must not enable auto-negotiation */
1203 *autoneg = FALSE;
1204
1205 /* Check if 1G SFP module. */
1206 if (hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
1207 hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1
1208 || hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
1209 hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1) {
1210 *speed = IXGBE_LINK_SPEED_1GB_FULL;
1211 return IXGBE_SUCCESS;
1212 }
1213
1214 /* Link capabilities are based on SFP */
1215 if (hw->phy.multispeed_fiber)
1216 *speed = IXGBE_LINK_SPEED_10GB_FULL |
1217 IXGBE_LINK_SPEED_1GB_FULL;
1218 else
1219 *speed = IXGBE_LINK_SPEED_10GB_FULL;
1220 } else {
1221 *speed = IXGBE_LINK_SPEED_10GB_FULL |
1222 IXGBE_LINK_SPEED_1GB_FULL;
1223 *autoneg = TRUE;
1224 }
1225
1226 return IXGBE_SUCCESS;
1227}
1228
1229/**
1230 * ixgbe_get_lasi_ext_t_x550em - Determime external Base T PHY interrupt cause
1231 * @hw: pointer to hardware structure
1232 * @lsc: pointer to boolean flag which indicates whether external Base T
1233 * PHY interrupt is lsc
1234 *
1235 * Determime if external Base T PHY interrupt cause is high temperature
1236 * failure alarm or link status change.
1237 *
1238 * Return IXGBE_ERR_OVERTEMP if interrupt is high temperature
1239 * failure alarm, else return PHY access status.
1240 */
1241static s32 ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw *hw, bool *lsc)
1242{
1243 u32 status;
1244 u16 reg;
1245
1246 *lsc = FALSE;
1247
1248 /* Vendor alarm triggered */
1249 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_CHIP_STD_INT_FLAG,
1250 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
1251 ®);
1252
1253 if (status != IXGBE_SUCCESS ||
1254 !(reg & IXGBE_MDIO_GLOBAL_VEN_ALM_INT_EN))
1255 return status;
1256
1257 /* Vendor Auto-Neg alarm triggered or Global alarm 1 triggered */
1258 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_FLAG,
1259 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
1260 ®);
1261
1262 if (status != IXGBE_SUCCESS ||
1263 !(reg & (IXGBE_MDIO_GLOBAL_AN_VEN_ALM_INT_EN |
1264 IXGBE_MDIO_GLOBAL_ALARM_1_INT)))
1265 return status;
1266
1267 /* Global alarm triggered */
1268 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_ALARM_1,
1269 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
1270 ®);
1271
1272 if (status != IXGBE_SUCCESS)
1273 return status;
1274
1275 /* If high temperature failure, then return over temp error and exit */
1276 if (reg & IXGBE_MDIO_GLOBAL_ALM_1_HI_TMP_FAIL) {
1277 /* power down the PHY in case the PHY FW didn't already */
1278 ixgbe_set_copper_phy_power(hw, FALSE);
1279 return IXGBE_ERR_OVERTEMP;
1280 } else if (reg & IXGBE_MDIO_GLOBAL_ALM_1_DEV_FAULT) {
1281 /* device fault alarm triggered */
1282 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_FAULT_MSG,
1283 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
1284 ®);
1285
1286 if (status != IXGBE_SUCCESS)
1287 return status;
1288
1289 /* if device fault was due to high temp alarm handle and exit */
1290 if (reg == IXGBE_MDIO_GLOBAL_FAULT_MSG_HI_TMP) {
1291 /* power down the PHY in case the PHY FW didn't */
1292 ixgbe_set_copper_phy_power(hw, FALSE);
1293 return IXGBE_ERR_OVERTEMP;
1294 }
1295 }
1296
1297 /* Vendor alarm 2 triggered */
1298 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_CHIP_STD_INT_FLAG,
1299 IXGBE_MDIO_AUTO_NEG_DEV_TYPE, ®);
1300
1301 if (status != IXGBE_SUCCESS ||
1302 !(reg & IXGBE_MDIO_GLOBAL_STD_ALM2_INT))
1303 return status;
1304
1305 /* link connect/disconnect event occurred */
1306 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM2,
1307 IXGBE_MDIO_AUTO_NEG_DEV_TYPE, ®);
1308
1309 if (status != IXGBE_SUCCESS)
1310 return status;
1311
1312 /* Indicate LSC */
1313 if (reg & IXGBE_MDIO_AUTO_NEG_VEN_LSC)
1314 *lsc = TRUE;
1315
1316 return IXGBE_SUCCESS;
1317}
1318
1319/**
1320 * ixgbe_enable_lasi_ext_t_x550em - Enable external Base T PHY interrupts
1321 * @hw: pointer to hardware structure
1322 *
1323 * Enable link status change and temperature failure alarm for the external
1324 * Base T PHY
1325 *
1326 * Returns PHY access status
1327 */
1328static s32 ixgbe_enable_lasi_ext_t_x550em(struct ixgbe_hw *hw)
1329{
1330 u32 status;
1331 u16 reg;
1332 bool lsc;
1333
1334 /* Clear interrupt flags */
1335 status = ixgbe_get_lasi_ext_t_x550em(hw, &lsc);
1336
1337 /* Enable link status change alarm */
1338 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK,
1339 IXGBE_MDIO_AUTO_NEG_DEV_TYPE, ®);
1340
1341 if (status != IXGBE_SUCCESS)
1342 return status;
1343
1344 reg |= IXGBE_MDIO_PMA_TX_VEN_LASI_INT_EN;
1345
1346 status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK,
1347 IXGBE_MDIO_AUTO_NEG_DEV_TYPE, reg);
1348
1349 if (status != IXGBE_SUCCESS)
1350 return status;
1351
1352 /* Enables high temperature failure alarm */
1353 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_MASK,
1354 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
1355 ®);
1356
1357 if (status != IXGBE_SUCCESS)
1358 return status;
1359
1360 reg |= IXGBE_MDIO_GLOBAL_INT_HI_TEMP_EN;
1361
1362 status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_MASK,
1363 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
1364 reg);
1365
1366 if (status != IXGBE_SUCCESS)
1367 return status;
1368
1369 /* Enable vendor Auto-Neg alarm and Global Interrupt Mask 1 alarm */
1370 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_MASK,
1371 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
1372 ®);
1373
1374 if (status != IXGBE_SUCCESS)
1375 return status;
1376
1377 reg |= (IXGBE_MDIO_GLOBAL_AN_VEN_ALM_INT_EN |
1378 IXGBE_MDIO_GLOBAL_ALARM_1_INT);
1379
1380 status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_MASK,
1381 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
1382 reg);
1383
1384 if (status != IXGBE_SUCCESS)
1385 return status;
1386
1387 /* Enable chip-wide vendor alarm */
1388 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_STD_MASK,
1389 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
1390 ®);
1391
1392 if (status != IXGBE_SUCCESS)
1393 return status;
1394
1395 reg |= IXGBE_MDIO_GLOBAL_VEN_ALM_INT_EN;
1396
1397 status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_STD_MASK,
1398 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
1399 reg);
1400
1401 return status;
1402}
1403
1404/**
1405 * ixgbe_setup_kr_speed_x550em - Configure the KR PHY for link speed.
1406 * @hw: pointer to hardware structure
1407 * @speed: link speed
1408 *
1409 * Configures the integrated KR PHY.
1410 **/
1411static s32 ixgbe_setup_kr_speed_x550em(struct ixgbe_hw *hw,
1412 ixgbe_link_speed speed)
1413{
1414 s32 status;
1415 u32 reg_val;
1416
1417 status = ixgbe_read_iosf_sb_reg_x550(hw,
1418 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
1419 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
1420 if (status)
1421 return status;
1422
1423 reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE;
1424 reg_val &= ~(IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KR |
1425 IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KX);
1426
1427 /* Advertise 10G support. */
1428 if (speed & IXGBE_LINK_SPEED_10GB_FULL)
1429 reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KR;
1430
1431 /* Advertise 1G support. */
1432 if (speed & IXGBE_LINK_SPEED_1GB_FULL)
1433 reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KX;
1434
1435 /* Restart auto-negotiation. */
1436 reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART;
1437 status = ixgbe_write_iosf_sb_reg_x550(hw,
1438 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
1439 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
1440
1441 return status;
1442}
1443
1444/**
1445 * ixgbe_init_phy_ops_X550em - PHY/SFP specific init
1446 * @hw: pointer to hardware structure
1447 *
1448 * Initialize any function pointers that were not able to be
1449 * set during init_shared_code because the PHY/SFP type was
1450 * not known. Perform the SFP init if necessary.
1451 */
1452s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw)
1453{
1454 struct ixgbe_phy_info *phy = &hw->phy;
1455 ixgbe_link_speed speed;
1456 s32 ret_val;
1457
1458 DEBUGFUNC("ixgbe_init_phy_ops_X550em");
1459
1460 hw->mac.ops.set_lan_id(hw);
1461
1462 if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) {
1463 phy->phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM;
1464 ixgbe_setup_mux_ctl(hw);
1465
1466 /* Save NW management interface connected on board. This is used
1467 * to determine internal PHY mode.
1468 */
1469 phy->nw_mng_if_sel = IXGBE_READ_REG(hw, IXGBE_NW_MNG_IF_SEL);
1470 if (phy->nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE) {
1471 speed = IXGBE_LINK_SPEED_10GB_FULL |
1472 IXGBE_LINK_SPEED_1GB_FULL;
1473 }
1474 phy->ops.identify_sfp = ixgbe_identify_sfp_module_X550em;
1475 }
1476
1477 /* Identify the PHY or SFP module */
1478 ret_val = phy->ops.identify(hw);
1479 if (ret_val == IXGBE_ERR_SFP_NOT_SUPPORTED)
1480 return ret_val;
1481
1482 /* Setup function pointers based on detected hardware */
1483 ixgbe_init_mac_link_ops_X550em(hw);
1484 if (phy->sfp_type != ixgbe_sfp_type_unknown)
1485 phy->ops.reset = NULL;
1486
1487 /* Set functions pointers based on phy type */
1488 switch (hw->phy.type) {
1489 case ixgbe_phy_x550em_kx4:
1490 phy->ops.setup_link = NULL;
1491 phy->ops.read_reg = ixgbe_read_phy_reg_x550em;
1492 phy->ops.write_reg = ixgbe_write_phy_reg_x550em;
1493 break;
1494 case ixgbe_phy_x550em_kr:
1495 phy->ops.setup_link = ixgbe_setup_kr_x550em;
1496 phy->ops.read_reg = ixgbe_read_phy_reg_x550em;
1497 phy->ops.write_reg = ixgbe_write_phy_reg_x550em;
1498 break;
1499 case ixgbe_phy_x550em_ext_t:
1500 /* Save NW management interface connected on board. This is used
1501 * to determine internal PHY mode
1502 */
1503 phy->nw_mng_if_sel = IXGBE_READ_REG(hw, IXGBE_NW_MNG_IF_SEL);
1504
1505 /* If internal link mode is XFI, then setup iXFI internal link,
1506 * else setup KR now.
1507 */
1508 if (!(phy->nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) {
1509 phy->ops.setup_internal_link =
1510 ixgbe_setup_internal_phy_t_x550em;
1511 } else {
1512 speed = IXGBE_LINK_SPEED_10GB_FULL |
1513 IXGBE_LINK_SPEED_1GB_FULL;
1514 ret_val = ixgbe_setup_kr_speed_x550em(hw, speed);
1515 }
1516
1517 /* setup SW LPLU only for first revision */
1518 if (!(IXGBE_FUSES0_REV1 & IXGBE_READ_REG(hw,
1519 IXGBE_FUSES0_GROUP(0))))
1520 phy->ops.enter_lplu = ixgbe_enter_lplu_t_x550em;
1521
1522 phy->ops.handle_lasi = ixgbe_handle_lasi_ext_t_x550em;
1523 phy->ops.reset = ixgbe_reset_phy_t_X550em;
1524 break;
1525 default:
1526 break;
1527 }
1528 return ret_val;
1529}
1530
1531/**
1532 * ixgbe_reset_hw_X550em - Perform hardware reset
1533 * @hw: pointer to hardware structure
1534 *
1535 * Resets the hardware by resetting the transmit and receive units, masks
1536 * and clears all interrupts, perform a PHY reset, and perform a link (MAC)
1537 * reset.
1538 */
1539s32 ixgbe_reset_hw_X550em(struct ixgbe_hw *hw)
1540{
1541 ixgbe_link_speed link_speed;
1542 s32 status;
1543 u32 ctrl = 0;
1544 u32 i;
1545 u32 hlreg0;
1546 bool link_up = FALSE;
1547
1548 DEBUGFUNC("ixgbe_reset_hw_X550em");
1549
1550 /* Call adapter stop to disable Tx/Rx and clear interrupts */
1551 status = hw->mac.ops.stop_adapter(hw);
1552 if (status != IXGBE_SUCCESS)
1553 return status;
1554
1555 /* flush pending Tx transactions */
1556 ixgbe_clear_tx_pending(hw);
1557
1558 if (hw->device_id == IXGBE_DEV_ID_X550EM_X_10G_T) {
1559 /* Config MDIO clock speed before the first MDIO PHY access */
1560 hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0);
1561 hlreg0 &= ~IXGBE_HLREG0_MDCSPD;
1562 IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0);
1563 }
1564
1565 /* PHY ops must be identified and initialized prior to reset */
1566 status = hw->phy.ops.init(hw);
1567
1568 if (status == IXGBE_ERR_SFP_NOT_SUPPORTED)
1569 return status;
1570
1571 /* start the external PHY */
1572 if (hw->phy.type == ixgbe_phy_x550em_ext_t) {
1573 status = ixgbe_init_ext_t_x550em(hw);
1574 if (status)
1575 return status;
1576 }
1577
1578 /* Setup SFP module if there is one present. */
1579 if (hw->phy.sfp_setup_needed) {
1580 status = hw->mac.ops.setup_sfp(hw);
1581 hw->phy.sfp_setup_needed = FALSE;
1582 }
1583
1584 if (status == IXGBE_ERR_SFP_NOT_SUPPORTED)
1585 return status;
1586
1587 /* Reset PHY */
1588 if (!hw->phy.reset_disable && hw->phy.ops.reset)
1589 hw->phy.ops.reset(hw);
1590
1591mac_reset_top:
1592 /* Issue global reset to the MAC. Needs to be SW reset if link is up.
1593 * If link reset is used when link is up, it might reset the PHY when
1594 * mng is using it. If link is down or the flag to force full link
1595 * reset is set, then perform link reset.
1596 */
1597 ctrl = IXGBE_CTRL_LNK_RST;
1598 if (!hw->force_full_reset) {
1599 hw->mac.ops.check_link(hw, &link_speed, &link_up, FALSE);
1600 if (link_up)
1601 ctrl = IXGBE_CTRL_RST;
1602 }
1603
1604 ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL);
1605 IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl);
1606 IXGBE_WRITE_FLUSH(hw);
1607
1608 /* Poll for reset bit to self-clear meaning reset is complete */
1609 for (i = 0; i < 10; i++) {
1610 usec_delay(1);
1611 ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
1612 if (!(ctrl & IXGBE_CTRL_RST_MASK))
1613 break;
1614 }
1615
1616 if (ctrl & IXGBE_CTRL_RST_MASK) {
1617 status = IXGBE_ERR_RESET_FAILED;
1618 DEBUGOUT("Reset polling failed to complete.\n");
1619 }
1620
1621 msec_delay(50);
1622
1623 /* Double resets are required for recovery from certain error
1624 * conditions. Between resets, it is necessary to stall to
1625 * allow time for any pending HW events to complete.
1626 */
1627 if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) {
1628 hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED;
1629 goto mac_reset_top;
1630 }
1631
1632 /* Store the permanent mac address */
1633 hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
1634
1635 /* Store MAC address from RAR0, clear receive address registers, and
1636 * clear the multicast table. Also reset num_rar_entries to 128,
1637 * since we modify this value when programming the SAN MAC address.
1638 */
1639 hw->mac.num_rar_entries = 128;
1640 hw->mac.ops.init_rx_addrs(hw);
1641
1642 if (hw->device_id == IXGBE_DEV_ID_X550EM_X_SFP)
1643 ixgbe_setup_mux_ctl(hw);
1644
1645 return status;
1646}
1647
1648/**
1649 * ixgbe_init_ext_t_x550em - Start (unstall) the external Base T PHY.
1650 * @hw: pointer to hardware structure
1651 */
1652s32 ixgbe_init_ext_t_x550em(struct ixgbe_hw *hw)
1653{
1654 u32 status;
1655 u16 reg;
1656
1657 status = hw->phy.ops.read_reg(hw,
1658 IXGBE_MDIO_TX_VENDOR_ALARMS_3,
1659 IXGBE_MDIO_PMA_PMD_DEV_TYPE,
1660 ®);
1661
1662 if (status != IXGBE_SUCCESS)
1663 return status;
1664
1665 /* If PHY FW reset completed bit is set then this is the first
1666 * SW instance after a power on so the PHY FW must be un-stalled.
1667 */
1668 if (reg & IXGBE_MDIO_TX_VENDOR_ALARMS_3_RST_MASK) {
1669 status = hw->phy.ops.read_reg(hw,
1670 IXGBE_MDIO_GLOBAL_RES_PR_10,
1671 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
1672 ®);
1673
1674 if (status != IXGBE_SUCCESS)
1675 return status;
1676
1677 reg &= ~IXGBE_MDIO_POWER_UP_STALL;
1678
1679 status = hw->phy.ops.write_reg(hw,
1680 IXGBE_MDIO_GLOBAL_RES_PR_10,
1681 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
1682 reg);
1683
1684 if (status != IXGBE_SUCCESS)
1685 return status;
1686 }
1687
1688 return status;
1689}
1690
1691/**
1692 * ixgbe_setup_kr_x550em - Configure the KR PHY.
1693 * @hw: pointer to hardware structure
1694 *
1695 * Configures the integrated KR PHY.
1696 **/
1697s32 ixgbe_setup_kr_x550em(struct ixgbe_hw *hw)
1698{
1699 return ixgbe_setup_kr_speed_x550em(hw, hw->phy.autoneg_advertised);
1700}
1701
1702/**
1703 * ixgbe_setup_mac_link_sfp_x550em - Setup internal/external the PHY for SFP
1704 * @hw: pointer to hardware structure
1705 *
1706 * Configure the external PHY and the integrated KR PHY for SFP support.
1707 **/
1708s32 ixgbe_setup_mac_link_sfp_x550em(struct ixgbe_hw *hw,
1709 ixgbe_link_speed speed,
1710 bool autoneg_wait_to_complete)
1711{
1712 s32 ret_val;
1713 u16 reg_slice, reg_val;
1714 bool setup_linear = FALSE;
1715 UNREFERENCED_1PARAMETER(autoneg_wait_to_complete);
1716
1717 /* Check if SFP module is supported and linear */
1718 ret_val = ixgbe_supported_sfp_modules_X550em(hw, &setup_linear);
1719
1720 /* If no SFP module present, then return success. Return success since
1721 * there is no reason to configure CS4227 and SFP not present error is
1722 * not excepted in the setup MAC link flow.
1723 */
1724 if (ret_val == IXGBE_ERR_SFP_NOT_PRESENT)
1725 return IXGBE_SUCCESS;
1726
1727 if (ret_val != IXGBE_SUCCESS)
1728 return ret_val;
1729
1730 if (!(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) {
1731 /* Configure CS4227 LINE side to 10G SR. */
1732 reg_slice = IXGBE_CS4227_LINE_SPARE22_MSB +
1733 (hw->bus.lan_id << 12);
1734 reg_val = IXGBE_CS4227_SPEED_10G;
1735 ret_val = ixgbe_write_i2c_combined(hw, IXGBE_CS4227, reg_slice,
1736 reg_val);
1737
1738 reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB +
1739 (hw->bus.lan_id << 12);
1740 reg_val = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1;
1741 ret_val = ixgbe_write_i2c_combined(hw, IXGBE_CS4227, reg_slice,
1742 reg_val);
1743
1744 /* Configure CS4227 for HOST connection rate then type. */
1745 reg_slice = IXGBE_CS4227_HOST_SPARE22_MSB +
1746 (hw->bus.lan_id << 12);
1747 reg_val = (speed & IXGBE_LINK_SPEED_10GB_FULL) ?
1748 IXGBE_CS4227_SPEED_10G : IXGBE_CS4227_SPEED_1G;
1749 ret_val = ixgbe_write_i2c_combined(hw, IXGBE_CS4227, reg_slice,
1750 reg_val);
1751
1752 reg_slice = IXGBE_CS4227_HOST_SPARE24_LSB +
1753 (hw->bus.lan_id << 12);
1754 if (setup_linear)
1755 reg_val = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1;
1756 else
1757 reg_val = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1;
1758 ret_val = ixgbe_write_i2c_combined(hw, IXGBE_CS4227, reg_slice,
1759 reg_val);
1760
1761 /* Setup XFI internal link. */
1762 ret_val = ixgbe_setup_ixfi_x550em(hw, &speed);
1763 } else {
1764 /* Configure internal PHY for KR/KX. */
1765 ixgbe_setup_kr_speed_x550em(hw, speed);
1766
1767 /* Configure CS4227 LINE side to proper mode. */
1768 reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB +
1769 (hw->bus.lan_id << 12);
1770 if (setup_linear)
1771 reg_val = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1;
1772 else
1773 reg_val = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1;
1774 ret_val = ixgbe_write_i2c_combined(hw, IXGBE_CS4227, reg_slice,
1775 reg_val);
1776 }
1777 return ret_val;
1778}
1779
1780/**
1781 * ixgbe_setup_ixfi_x550em - Configure the KR PHY for iXFI mode.
1782 * @hw: pointer to hardware structure
1783 * @speed: the link speed to force
1784 *
1785 * Configures the integrated KR PHY to use iXFI mode. Used to connect an
1786 * internal and external PHY at a specific speed, without autonegotiation.
1787 **/
1788static s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed)
1789{
1790 s32 status;
1791 u32 reg_val;
1792
1793 /* Disable AN and force speed to 10G Serial. */
1794 status = ixgbe_read_iosf_sb_reg_x550(hw,
1795 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
1796 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
1797 if (status != IXGBE_SUCCESS)
1798 return status;
1799
1800 reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE;
1801 reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK;
1802
1803 /* Select forced link speed for internal PHY. */
1804 switch (*speed) {
1805 case IXGBE_LINK_SPEED_10GB_FULL:
1806 reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_10G;
1807 break;
1808 case IXGBE_LINK_SPEED_1GB_FULL:
1809 reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G;
1810 break;
1811 default:
1812 /* Other link speeds are not supported by internal KR PHY. */
1813 return IXGBE_ERR_LINK_SETUP;
1814 }
1815
1816 status = ixgbe_write_iosf_sb_reg_x550(hw,
1817 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
1818 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
1819 if (status != IXGBE_SUCCESS)
1820 return status;
1821
1822 /* Disable training protocol FSM. */
1823 status = ixgbe_read_iosf_sb_reg_x550(hw,
1824 IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id),
1825 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
1826 if (status != IXGBE_SUCCESS)
1827 return status;
1828 reg_val |= IXGBE_KRM_RX_TRN_LINKUP_CTRL_CONV_WO_PROTOCOL;
1829 status = ixgbe_write_iosf_sb_reg_x550(hw,
1830 IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id),
1831 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
1832 if (status != IXGBE_SUCCESS)
1833 return status;
1834
1835 /* Disable Flex from training TXFFE. */
1836 status = ixgbe_read_iosf_sb_reg_x550(hw,
1837 IXGBE_KRM_DSP_TXFFE_STATE_4(hw->bus.lan_id),
1838 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
1839 if (status != IXGBE_SUCCESS)
1840 return status;
1841 reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_C0_EN;
1842 reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN;
1843 reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN;
1844 status = ixgbe_write_iosf_sb_reg_x550(hw,
1845 IXGBE_KRM_DSP_TXFFE_STATE_4(hw->bus.lan_id),
1846 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
1847 if (status != IXGBE_SUCCESS)
1848 return status;
1849 status = ixgbe_read_iosf_sb_reg_x550(hw,
1850 IXGBE_KRM_DSP_TXFFE_STATE_5(hw->bus.lan_id),
1851 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
1852 if (status != IXGBE_SUCCESS)
1853 return status;
1854 reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_C0_EN;
1855 reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN;
1856 reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN;
1857 status = ixgbe_write_iosf_sb_reg_x550(hw,
1858 IXGBE_KRM_DSP_TXFFE_STATE_5(hw->bus.lan_id),
1859 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
1860 if (status != IXGBE_SUCCESS)
1861 return status;
1862
1863 /* Enable override for coefficients. */
1864 status = ixgbe_read_iosf_sb_reg_x550(hw,
1865 IXGBE_KRM_TX_COEFF_CTRL_1(hw->bus.lan_id),
1866 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
1867 if (status != IXGBE_SUCCESS)
1868 return status;
1869 reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_OVRRD_EN;
1870 reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CZERO_EN;
1871 reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CPLUS1_OVRRD_EN;
1872 reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CMINUS1_OVRRD_EN;
1873 status = ixgbe_write_iosf_sb_reg_x550(hw,
1874 IXGBE_KRM_TX_COEFF_CTRL_1(hw->bus.lan_id),
1875 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
1876 if (status != IXGBE_SUCCESS)
1877 return status;
1878
1879 /* Toggle port SW reset by AN reset. */
1880 status = ixgbe_read_iosf_sb_reg_x550(hw,
1881 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
1882 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
1883 if (status != IXGBE_SUCCESS)
1884 return status;
1885 reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART;
1886 status = ixgbe_write_iosf_sb_reg_x550(hw,
1887 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
1888 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
1889
1890 return status;
1891}
1892
1893/**
1894 * ixgbe_ext_phy_t_x550em_get_link - Get ext phy link status
1895 * @hw: address of hardware structure
1896 * @link_up: address of boolean to indicate link status
1897 *
1898 * Returns error code if unable to get link status.
1899 */
1900static s32 ixgbe_ext_phy_t_x550em_get_link(struct ixgbe_hw *hw, bool *link_up)
1901{
1902 u32 ret;
1903 u16 autoneg_status;
1904
1905 *link_up = FALSE;
1906
1907 /* read this twice back to back to indicate current status */
1908 ret = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
1909 IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
1910 &autoneg_status);
1911 if (ret != IXGBE_SUCCESS)
1912 return ret;
1913
1914 ret = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
1915 IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
1916 &autoneg_status);
1917 if (ret != IXGBE_SUCCESS)
1918 return ret;
1919
1920 *link_up = !!(autoneg_status & IXGBE_MDIO_AUTO_NEG_LINK_STATUS);
1921
1922 return IXGBE_SUCCESS;
1923}
1924
1925/**
1926 * ixgbe_setup_internal_phy_t_x550em - Configure KR PHY to X557 link
1927 * @hw: point to hardware structure
1928 *
1929 * Configures the link between the integrated KR PHY and the external X557 PHY
1930 * The driver will call this function when it gets a link status change
1931 * interrupt from the X557 PHY. This function configures the link speed
1932 * between the PHYs to match the link speed of the BASE-T link.
1933 *
1934 * A return of a non-zero value indicates an error, and the base driver should
1935 * not report link up.
1936 */
1937s32 ixgbe_setup_internal_phy_t_x550em(struct ixgbe_hw *hw)
1938{
1939 ixgbe_link_speed force_speed;
1940 bool link_up;
1941 u32 status;
1942 u16 speed;
1943
1944 if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper)
1945 return IXGBE_ERR_CONFIG;
1946
1947 /* If link is not up, then there is no setup necessary so return */
1948 status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up);
1949 if (status != IXGBE_SUCCESS)
1950 return status;
1951
1952 if (!link_up)
1953 return IXGBE_SUCCESS;
1954
1955 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_STAT,
1956 IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
1957 &speed);
1958 if (status != IXGBE_SUCCESS)
1959 return status;
1960
1961 /* If link is not still up, then no setup is necessary so return */
1962 status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up);
1963 if (status != IXGBE_SUCCESS)
1964 return status;
1965 if (!link_up)
1966 return IXGBE_SUCCESS;
1967
1968 /* clear everything but the speed and duplex bits */
1969 speed &= IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_MASK;
1970
1971 switch (speed) {
1972 case IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB_FULL:
1973 force_speed = IXGBE_LINK_SPEED_10GB_FULL;
1974 break;
1975 case IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB_FULL:
1976 force_speed = IXGBE_LINK_SPEED_1GB_FULL;
1977 break;
1978 default:
1979 /* Internal PHY does not support anything else */
1980 return IXGBE_ERR_INVALID_LINK_SETTINGS;
1981 }
1982
1983 return ixgbe_setup_ixfi_x550em(hw, &force_speed);
1984}
1985
1986/**
1987 * ixgbe_setup_phy_loopback_x550em - Configure the KR PHY for loopback.
1988 * @hw: pointer to hardware structure
1989 *
1990 * Configures the integrated KR PHY to use internal loopback mode.
1991 **/
1992s32 ixgbe_setup_phy_loopback_x550em(struct ixgbe_hw *hw)
1993{
1994 s32 status;
1995 u32 reg_val;
1996
1997 /* Disable AN and force speed to 10G Serial. */
1998 status = ixgbe_read_iosf_sb_reg_x550(hw,
1999 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
2000 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
2001 if (status != IXGBE_SUCCESS)
2002 return status;
2003 reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE;
2004 reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK;
2005 reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_10G;
2006 status = ixgbe_write_iosf_sb_reg_x550(hw,
2007 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
2008 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
2009 if (status != IXGBE_SUCCESS)
2010 return status;
2011
2012 /* Set near-end loopback clocks. */
2013 status = ixgbe_read_iosf_sb_reg_x550(hw,
2014 IXGBE_KRM_PORT_CAR_GEN_CTRL(hw->bus.lan_id),
2015 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
2016 if (status != IXGBE_SUCCESS)
2017 return status;
2018 reg_val |= IXGBE_KRM_PORT_CAR_GEN_CTRL_NELB_32B;
2019 reg_val |= IXGBE_KRM_PORT_CAR_GEN_CTRL_NELB_KRPCS;
2020 status = ixgbe_write_iosf_sb_reg_x550(hw,
2021 IXGBE_KRM_PORT_CAR_GEN_CTRL(hw->bus.lan_id),
2022 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
2023 if (status != IXGBE_SUCCESS)
2024 return status;
2025
2026 /* Set loopback enable. */
2027 status = ixgbe_read_iosf_sb_reg_x550(hw,
2028 IXGBE_KRM_PMD_DFX_BURNIN(hw->bus.lan_id),
2029 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
2030 if (status != IXGBE_SUCCESS)
2031 return status;
2032 reg_val |= IXGBE_KRM_PMD_DFX_BURNIN_TX_RX_KR_LB_MASK;
2033 status = ixgbe_write_iosf_sb_reg_x550(hw,
2034 IXGBE_KRM_PMD_DFX_BURNIN(hw->bus.lan_id),
2035 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
2036 if (status != IXGBE_SUCCESS)
2037 return status;
2038
2039 /* Training bypass. */
2040 status = ixgbe_read_iosf_sb_reg_x550(hw,
2041 IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id),
2042 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
2043 if (status != IXGBE_SUCCESS)
2044 return status;
2045 reg_val |= IXGBE_KRM_RX_TRN_LINKUP_CTRL_PROTOCOL_BYPASS;
2046 status = ixgbe_write_iosf_sb_reg_x550(hw,
2047 IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id),
2048 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
2049
2050 return status;
2051}
2052
2053/**
2054 * ixgbe_read_ee_hostif_X550 - Read EEPROM word using a host interface command
2055 * assuming that the semaphore is already obtained.
2056 * @hw: pointer to hardware structure
2057 * @offset: offset of word in the EEPROM to read
2058 * @data: word read from the EEPROM
2059 *
2060 * Reads a 16 bit word from the EEPROM using the hostif.
2061 **/
2062s32 ixgbe_read_ee_hostif_data_X550(struct ixgbe_hw *hw, u16 offset,
2063 u16 *data)
2064{
2065 s32 status;
2066 struct ixgbe_hic_read_shadow_ram buffer;
2067
2068 DEBUGFUNC("ixgbe_read_ee_hostif_data_X550");
2069 buffer.hdr.req.cmd = FW_READ_SHADOW_RAM_CMD;
2070 buffer.hdr.req.buf_lenh = 0;
2071 buffer.hdr.req.buf_lenl = FW_READ_SHADOW_RAM_LEN;
2072 buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM;
2073
2074 /* convert offset from words to bytes */
2075 buffer.address = IXGBE_CPU_TO_BE32(offset * 2);
2076 /* one word */
2077 buffer.length = IXGBE_CPU_TO_BE16(sizeof(u16));
2078
2079 status = ixgbe_host_interface_command(hw, (u32 *)&buffer,
2080 sizeof(buffer),
2081 IXGBE_HI_COMMAND_TIMEOUT, FALSE);
2082
2083 if (status)
2084 return status;
2085
2086 *data = (u16)IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG,
2087 FW_NVM_DATA_OFFSET);
2088
2089 return 0;
2090}
2091
2092/**
2093 * ixgbe_read_ee_hostif_X550 - Read EEPROM word using a host interface command
2094 * @hw: pointer to hardware structure
2095 * @offset: offset of word in the EEPROM to read
2096 * @data: word read from the EEPROM
2097 *
2098 * Reads a 16 bit word from the EEPROM using the hostif.
2099 **/
2100s32 ixgbe_read_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset,
2101 u16 *data)
2102{
2103 s32 status = IXGBE_SUCCESS;
2104
2105 DEBUGFUNC("ixgbe_read_ee_hostif_X550");
2106
2107 if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) ==
2108 IXGBE_SUCCESS) {
2109 status = ixgbe_read_ee_hostif_data_X550(hw, offset, data);
2110 hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
2111 } else {
2112 status = IXGBE_ERR_SWFW_SYNC;
2113 }
2114
2115 return status;
2116}
2117
2118/**
2119 * ixgbe_read_ee_hostif_buffer_X550- Read EEPROM word(s) using hostif
2120 * @hw: pointer to hardware structure
2121 * @offset: offset of word in the EEPROM to read
2122 * @words: number of words
2123 * @data: word(s) read from the EEPROM
2124 *
2125 * Reads a 16 bit word(s) from the EEPROM using the hostif.
2126 **/
2127s32 ixgbe_read_ee_hostif_buffer_X550(struct ixgbe_hw *hw,
2128 u16 offset, u16 words, u16 *data)
2129{
2130 struct ixgbe_hic_read_shadow_ram buffer;
2131 u32 current_word = 0;
2132 u16 words_to_read;
2133 s32 status;
2134 u32 i;
2135
2136 DEBUGFUNC("ixgbe_read_ee_hostif_buffer_X550");
2137
2138 /* Take semaphore for the entire operation. */
2139 status = hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
2140 if (status) {
2141 DEBUGOUT("EEPROM read buffer - semaphore failed\n");
2142 return status;
2143 }
2144 while (words) {
2145 if (words > FW_MAX_READ_BUFFER_SIZE / 2)
2146 words_to_read = FW_MAX_READ_BUFFER_SIZE / 2;
2147 else
2148 words_to_read = words;
2149
2150 buffer.hdr.req.cmd = FW_READ_SHADOW_RAM_CMD;
2151 buffer.hdr.req.buf_lenh = 0;
2152 buffer.hdr.req.buf_lenl = FW_READ_SHADOW_RAM_LEN;
2153 buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM;
2154
2155 /* convert offset from words to bytes */
2156 buffer.address = IXGBE_CPU_TO_BE32((offset + current_word) * 2);
2157 buffer.length = IXGBE_CPU_TO_BE16(words_to_read * 2);
2158
2159 status = ixgbe_host_interface_command(hw, (u32 *)&buffer,
2160 sizeof(buffer),
2161 IXGBE_HI_COMMAND_TIMEOUT,
2162 FALSE);
2163
2164 if (status) {
2165 DEBUGOUT("Host interface command failed\n");
2166 goto out;
2167 }
2168
2169 for (i = 0; i < words_to_read; i++) {
2170 u32 reg = IXGBE_FLEX_MNG + (FW_NVM_DATA_OFFSET << 2) +
2171 2 * i;
2172 u32 value = IXGBE_READ_REG(hw, reg);
2173
2174 data[current_word] = (u16)(value & 0xffff);
2175 current_word++;
2176 i++;
2177 if (i < words_to_read) {
2178 value >>= 16;
2179 data[current_word] = (u16)(value & 0xffff);
2180 current_word++;
2181 }
2182 }
2183 words -= words_to_read;
2184 }
2185
2186out:
2187 hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
2188 return status;
2189}
2190
2191/**
2192 * ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif
2193 * @hw: pointer to hardware structure
2194 * @offset: offset of word in the EEPROM to write
2195 * @data: word write to the EEPROM
2196 *
2197 * Write a 16 bit word to the EEPROM using the hostif.
2198 **/
2199s32 ixgbe_write_ee_hostif_data_X550(struct ixgbe_hw *hw, u16 offset,
2200 u16 data)
2201{
2202 s32 status;
2203 struct ixgbe_hic_write_shadow_ram buffer;
2204
2205 DEBUGFUNC("ixgbe_write_ee_hostif_data_X550");
2206
2207 buffer.hdr.req.cmd = FW_WRITE_SHADOW_RAM_CMD;
2208 buffer.hdr.req.buf_lenh = 0;
2209 buffer.hdr.req.buf_lenl = FW_WRITE_SHADOW_RAM_LEN;
2210 buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM;
2211
2212 /* one word */
2213 buffer.length = IXGBE_CPU_TO_BE16(sizeof(u16));
2214 buffer.data = data;
2215 buffer.address = IXGBE_CPU_TO_BE32(offset * 2);
2216
2217 status = ixgbe_host_interface_command(hw, (u32 *)&buffer,
2218 sizeof(buffer),
2219 IXGBE_HI_COMMAND_TIMEOUT, FALSE);
2220
2221 return status;
2222}
2223
2224/**
2225 * ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif
2226 * @hw: pointer to hardware structure
2227 * @offset: offset of word in the EEPROM to write
2228 * @data: word write to the EEPROM
2229 *
2230 * Write a 16 bit word to the EEPROM using the hostif.
2231 **/
2232s32 ixgbe_write_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset,
2233 u16 data)
2234{
2235 s32 status = IXGBE_SUCCESS;
2236
2237 DEBUGFUNC("ixgbe_write_ee_hostif_X550");
2238
2239 if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) ==
2240 IXGBE_SUCCESS) {
2241 status = ixgbe_write_ee_hostif_data_X550(hw, offset, data);
2242 hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
2243 } else {
2244 DEBUGOUT("write ee hostif failed to get semaphore");
2245 status = IXGBE_ERR_SWFW_SYNC;
2246 }
2247
2248 return status;
2249}
2250
2251/**
2252 * ixgbe_write_ee_hostif_buffer_X550 - Write EEPROM word(s) using hostif
2253 * @hw: pointer to hardware structure
2254 * @offset: offset of word in the EEPROM to write
2255 * @words: number of words
2256 * @data: word(s) write to the EEPROM
2257 *
2258 * Write a 16 bit word(s) to the EEPROM using the hostif.
2259 **/
2260s32 ixgbe_write_ee_hostif_buffer_X550(struct ixgbe_hw *hw,
2261 u16 offset, u16 words, u16 *data)
2262{
2263 s32 status = IXGBE_SUCCESS;
2264 u32 i = 0;
2265
2266 DEBUGFUNC("ixgbe_write_ee_hostif_buffer_X550");
2267
2268 /* Take semaphore for the entire operation. */
2269 status = hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
2270 if (status != IXGBE_SUCCESS) {
2271 DEBUGOUT("EEPROM write buffer - semaphore failed\n");
2272 goto out;
2273 }
2274
2275 for (i = 0; i < words; i++) {
2276 status = ixgbe_write_ee_hostif_data_X550(hw, offset + i,
2277 data[i]);
2278
2279 if (status != IXGBE_SUCCESS) {
2280 DEBUGOUT("Eeprom buffered write failed\n");
2281 break;
2282 }
2283 }
2284
2285 hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
2286out:
2287
2288 return status;
2289}
2290
2291/**
2292 * ixgbe_checksum_ptr_x550 - Checksum one pointer region
2293 * @hw: pointer to hardware structure
2294 * @ptr: pointer offset in eeprom
2295 * @size: size of section pointed by ptr, if 0 first word will be used as size
2296 * @csum: address of checksum to update
2297 *
2298 * Returns error status for any failure
2299 */
2300static s32 ixgbe_checksum_ptr_x550(struct ixgbe_hw *hw, u16 ptr,
2301 u16 size, u16 *csum, u16 *buffer,
2302 u32 buffer_size)
2303{
2304 u16 buf[256];
2305 s32 status;
2306 u16 length, bufsz, i, start;
2307 u16 *local_buffer;
2308
2309 bufsz = sizeof(buf) / sizeof(buf[0]);
2310
2311 /* Read a chunk at the pointer location */
2312 if (!buffer) {
2313 status = ixgbe_read_ee_hostif_buffer_X550(hw, ptr, bufsz, buf);
2314 if (status) {
2315 DEBUGOUT("Failed to read EEPROM image\n");
2316 return status;
2317 }
2318 local_buffer = buf;
2319 } else {
2320 if (buffer_size < ptr)
2321 return IXGBE_ERR_PARAM;
2322 local_buffer = &buffer[ptr];
2323 }
2324
2325 if (size) {
2326 start = 0;
2327 length = size;
2328 } else {
2329 start = 1;
2330 length = local_buffer[0];
2331
2332 /* Skip pointer section if length is invalid. */
2333 if (length == 0xFFFF || length == 0 ||
2334 (ptr + length) >= hw->eeprom.word_size)
2335 return IXGBE_SUCCESS;
2336 }
2337
2338 if (buffer && ((u32)start + (u32)length > buffer_size))
2339 return IXGBE_ERR_PARAM;
2340
2341 for (i = start; length; i++, length--) {
2342 if (i == bufsz && !buffer) {
2343 ptr += bufsz;
2344 i = 0;
2345 if (length < bufsz)
2346 bufsz = length;
2347
2348 /* Read a chunk at the pointer location */
2349 status = ixgbe_read_ee_hostif_buffer_X550(hw, ptr,
2350 bufsz, buf);
2351 if (status) {
2352 DEBUGOUT("Failed to read EEPROM image\n");
2353 return status;
2354 }
2355 }
2356 *csum += local_buffer[i];
2357 }
2358 return IXGBE_SUCCESS;
2359}
2360
2361/**
2362 * ixgbe_calc_checksum_X550 - Calculates and returns the checksum
2363 * @hw: pointer to hardware structure
2364 * @buffer: pointer to buffer containing calculated checksum
2365 * @buffer_size: size of buffer
2366 *
2367 * Returns a negative error code on error, or the 16-bit checksum
2368 **/
2369s32 ixgbe_calc_checksum_X550(struct ixgbe_hw *hw, u16 *buffer, u32 buffer_size)
2370{
2371 u16 eeprom_ptrs[IXGBE_EEPROM_LAST_WORD + 1];
2372 u16 *local_buffer;
2373 s32 status;
2374 u16 checksum = 0;
2375 u16 pointer, i, size;
2376
2377 DEBUGFUNC("ixgbe_calc_eeprom_checksum_X550");
2378
2379 hw->eeprom.ops.init_params(hw);
2380
2381 if (!buffer) {
2382 /* Read pointer area */
2383 status = ixgbe_read_ee_hostif_buffer_X550(hw, 0,
2384 IXGBE_EEPROM_LAST_WORD + 1,
2385 eeprom_ptrs);
2386 if (status) {
2387 DEBUGOUT("Failed to read EEPROM image\n");
2388 return status;
2389 }
2390 local_buffer = eeprom_ptrs;
2391 } else {
2392 if (buffer_size < IXGBE_EEPROM_LAST_WORD)
2393 return IXGBE_ERR_PARAM;
2394 local_buffer = buffer;
2395 }
2396
2397 /*
2398 * For X550 hardware include 0x0-0x41 in the checksum, skip the
2399 * checksum word itself
2400 */
2401 for (i = 0; i <= IXGBE_EEPROM_LAST_WORD; i++)
2402 if (i != IXGBE_EEPROM_CHECKSUM)
2403 checksum += local_buffer[i];
2404
2405 /*
2406 * Include all data from pointers 0x3, 0x6-0xE. This excludes the
2407 * FW, PHY module, and PCIe Expansion/Option ROM pointers.
2408 */
2409 for (i = IXGBE_PCIE_ANALOG_PTR_X550; i < IXGBE_FW_PTR; i++) {
2410 if (i == IXGBE_PHY_PTR || i == IXGBE_OPTION_ROM_PTR)
2411 continue;
2412
2413 pointer = local_buffer[i];
2414
2415 /* Skip pointer section if the pointer is invalid. */
2416 if (pointer == 0xFFFF || pointer == 0 ||
2417 pointer >= hw->eeprom.word_size)
2418 continue;
2419
2420 switch (i) {
2421 case IXGBE_PCIE_GENERAL_PTR:
2422 size = IXGBE_IXGBE_PCIE_GENERAL_SIZE;
2423 break;
2424 case IXGBE_PCIE_CONFIG0_PTR:
2425 case IXGBE_PCIE_CONFIG1_PTR:
2426 size = IXGBE_PCIE_CONFIG_SIZE;
2427 break;
2428 default:
2429 size = 0;
2430 break;
2431 }
2432
2433 status = ixgbe_checksum_ptr_x550(hw, pointer, size, &checksum,
2434 buffer, buffer_size);
2435 if (status)
2436 return status;
2437 }
2438
2439 checksum = (u16)IXGBE_EEPROM_SUM - checksum;
2440
2441 return (s32)checksum;
2442}
2443
2444/**
2445 * ixgbe_calc_eeprom_checksum_X550 - Calculates and returns the checksum
2446 * @hw: pointer to hardware structure
2447 *
2448 * Returns a negative error code on error, or the 16-bit checksum
2449 **/
2450s32 ixgbe_calc_eeprom_checksum_X550(struct ixgbe_hw *hw)
2451{
2452 return ixgbe_calc_checksum_X550(hw, NULL, 0);
2453}
2454
2455/**
2456 * ixgbe_validate_eeprom_checksum_X550 - Validate EEPROM checksum
2457 * @hw: pointer to hardware structure
2458 * @checksum_val: calculated checksum
2459 *
2460 * Performs checksum calculation and validates the EEPROM checksum. If the
2461 * caller does not need checksum_val, the value can be NULL.
2462 **/
2463s32 ixgbe_validate_eeprom_checksum_X550(struct ixgbe_hw *hw, u16 *checksum_val)
2464{
2465 s32 status;
2466 u16 checksum;
2467 u16 read_checksum = 0;
2468
2469 DEBUGFUNC("ixgbe_validate_eeprom_checksum_X550");
2470
2471 /* Read the first word from the EEPROM. If this times out or fails, do
2472 * not continue or we could be in for a very long wait while every
2473 * EEPROM read fails
2474 */
2475 status = hw->eeprom.ops.read(hw, 0, &checksum);
2476 if (status) {
2477 DEBUGOUT("EEPROM read failed\n");
2478 return status;
2479 }
2480
2481 status = hw->eeprom.ops.calc_checksum(hw);
2482 if (status < 0)
2483 return status;
2484
2485 checksum = (u16)(status & 0xffff);
2486
2487 status = ixgbe_read_ee_hostif_X550(hw, IXGBE_EEPROM_CHECKSUM,
2488 &read_checksum);
2489 if (status)
2490 return status;
2491
2492 /* Verify read checksum from EEPROM is the same as
2493 * calculated checksum
2494 */
2495 if (read_checksum != checksum) {
2496 status = IXGBE_ERR_EEPROM_CHECKSUM;
2497 ERROR_REPORT1(IXGBE_ERROR_INVALID_STATE,
2498 "Invalid EEPROM checksum");
2499 }
2500
2501 /* If the user cares, return the calculated checksum */
2502 if (checksum_val)
2503 *checksum_val = checksum;
2504
2505 return status;
2506}
2507
2508/**
2509 * ixgbe_update_eeprom_checksum_X550 - Updates the EEPROM checksum and flash
2510 * @hw: pointer to hardware structure
2511 *
2512 * After writing EEPROM to shadow RAM using EEWR register, software calculates
2513 * checksum and updates the EEPROM and instructs the hardware to update
2514 * the flash.
2515 **/
2516s32 ixgbe_update_eeprom_checksum_X550(struct ixgbe_hw *hw)
2517{
2518 s32 status;
2519 u16 checksum = 0;
2520
2521 DEBUGFUNC("ixgbe_update_eeprom_checksum_X550");
2522
2523 /* Read the first word from the EEPROM. If this times out or fails, do
2524 * not continue or we could be in for a very long wait while every
2525 * EEPROM read fails
2526 */
2527 status = ixgbe_read_ee_hostif_X550(hw, 0, &checksum);
2528 if (status) {
2529 DEBUGOUT("EEPROM read failed\n");
2530 return status;
2531 }
2532
2533 status = ixgbe_calc_eeprom_checksum_X550(hw);
2534 if (status < 0)
2535 return status;
2536
2537 checksum = (u16)(status & 0xffff);
2538
2539 status = ixgbe_write_ee_hostif_X550(hw, IXGBE_EEPROM_CHECKSUM,
2540 checksum);
2541 if (status)
2542 return status;
2543
2544 status = ixgbe_update_flash_X550(hw);
2545
2546 return status;
2547}
2548
2549/**
2550 * ixgbe_update_flash_X550 - Instruct HW to copy EEPROM to Flash device
2551 * @hw: pointer to hardware structure
2552 *
2553 * Issue a shadow RAM dump to FW to copy EEPROM from shadow RAM to the flash.
2554 **/
2555s32 ixgbe_update_flash_X550(struct ixgbe_hw *hw)
2556{
2557 s32 status = IXGBE_SUCCESS;
2558 union ixgbe_hic_hdr2 buffer;
2559
2560 DEBUGFUNC("ixgbe_update_flash_X550");
2561
2562 buffer.req.cmd = FW_SHADOW_RAM_DUMP_CMD;
2563 buffer.req.buf_lenh = 0;
2564 buffer.req.buf_lenl = FW_SHADOW_RAM_DUMP_LEN;
2565 buffer.req.checksum = FW_DEFAULT_CHECKSUM;
2566
2567 status = ixgbe_host_interface_command(hw, (u32 *)&buffer,
2568 sizeof(buffer),
2569 IXGBE_HI_COMMAND_TIMEOUT, FALSE);
2570
2571 return status;
2572}
2573
2574/**
2575 * ixgbe_get_supported_physical_layer_X550em - Returns physical layer type
2576 * @hw: pointer to hardware structure
2577 *
2578 * Determines physical layer capabilities of the current configuration.
2579 **/
2580u32 ixgbe_get_supported_physical_layer_X550em(struct ixgbe_hw *hw)
2581{
2582 u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
2583 u16 ext_ability = 0;
2584
2585 DEBUGFUNC("ixgbe_get_supported_physical_layer_X550em");
2586
2587 hw->phy.ops.identify(hw);
2588
2589 switch (hw->phy.type) {
2590 case ixgbe_phy_x550em_kr:
2591 physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KR |
2592 IXGBE_PHYSICAL_LAYER_1000BASE_KX;
2593 break;
2594 case ixgbe_phy_x550em_kx4:
2595 physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4 |
2596 IXGBE_PHYSICAL_LAYER_1000BASE_KX;
2597 break;
2598 case ixgbe_phy_x550em_ext_t:
2599 hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_EXT_ABILITY,
2600 IXGBE_MDIO_PMA_PMD_DEV_TYPE,
2601 &ext_ability);
2602 if (ext_ability & IXGBE_MDIO_PHY_10GBASET_ABILITY)
2603 physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T;
2604 if (ext_ability & IXGBE_MDIO_PHY_1000BASET_ABILITY)
2605 physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T;
2606 break;
2607 default:
2608 break;
2609 }
2610
2611 if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber)
2612 physical_layer = ixgbe_get_supported_phy_sfp_layer_generic(hw);
2613
2614 return physical_layer;
2615}
2616
2617/**
2618 * ixgbe_get_bus_info_x550em - Set PCI bus info
2619 * @hw: pointer to hardware structure
2620 *
2621 * Sets bus link width and speed to unknown because X550em is
2622 * not a PCI device.
2623 **/
2624s32 ixgbe_get_bus_info_X550em(struct ixgbe_hw *hw)
2625{
2626
2627 DEBUGFUNC("ixgbe_get_bus_info_x550em");
2628
2629 hw->bus.width = ixgbe_bus_width_unknown;
2630 hw->bus.speed = ixgbe_bus_speed_unknown;
2631
2632 hw->mac.ops.set_lan_id(hw);
2633
2634 return IXGBE_SUCCESS;
2635}
2636
2637/**
2638 * ixgbe_disable_rx_x550 - Disable RX unit
2639 *
2640 * Enables the Rx DMA unit for x550
2641 **/
2642void ixgbe_disable_rx_x550(struct ixgbe_hw *hw)
2643{
2644 u32 rxctrl, pfdtxgswc;
2645 s32 status;
2646 struct ixgbe_hic_disable_rxen fw_cmd;
2647
2648 DEBUGFUNC("ixgbe_enable_rx_dma_x550");
2649
2650 rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
2651 if (rxctrl & IXGBE_RXCTRL_RXEN) {
2652 pfdtxgswc = IXGBE_READ_REG(hw, IXGBE_PFDTXGSWC);
2653 if (pfdtxgswc & IXGBE_PFDTXGSWC_VT_LBEN) {
2654 pfdtxgswc &= ~IXGBE_PFDTXGSWC_VT_LBEN;
2655 IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, pfdtxgswc);
2656 hw->mac.set_lben = TRUE;
2657 } else {
2658 hw->mac.set_lben = FALSE;
2659 }
2660
2661 fw_cmd.hdr.cmd = FW_DISABLE_RXEN_CMD;
2662 fw_cmd.hdr.buf_len = FW_DISABLE_RXEN_LEN;
2663 fw_cmd.hdr.checksum = FW_DEFAULT_CHECKSUM;
2664 fw_cmd.port_number = (u8)hw->bus.lan_id;
2665
2666 status = ixgbe_host_interface_command(hw, (u32 *)&fw_cmd,
2667 sizeof(struct ixgbe_hic_disable_rxen),
2668 IXGBE_HI_COMMAND_TIMEOUT, TRUE);
2669
2670 /* If we fail - disable RX using register write */
2671 if (status) {
2672 rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
2673 if (rxctrl & IXGBE_RXCTRL_RXEN) {
2674 rxctrl &= ~IXGBE_RXCTRL_RXEN;
2675 IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl);
2676 }
2677 }
2678 }
2679}
2680
2681/**
2682 * ixgbe_enter_lplu_x550em - Transition to low power states
2683 * @hw: pointer to hardware structure
2684 *
2685 * Configures Low Power Link Up on transition to low power states
2686 * (from D0 to non-D0). Link is required to enter LPLU so avoid resetting the
2687 * X557 PHY immediately prior to entering LPLU.
2688 **/
2689s32 ixgbe_enter_lplu_t_x550em(struct ixgbe_hw *hw)
2690{
2691 u16 an_10g_cntl_reg, autoneg_reg, speed;
2692 s32 status;
2693 ixgbe_link_speed lcd_speed;
2694 u32 save_autoneg;
2695 bool link_up;
2696
2697 /* SW LPLU not required on later HW revisions. */
2698 if (IXGBE_FUSES0_REV1 & IXGBE_READ_REG(hw, IXGBE_FUSES0_GROUP(0)))
2699 return IXGBE_SUCCESS;
2700
2701 /* If blocked by MNG FW, then don't restart AN */
2702 if (ixgbe_check_reset_blocked(hw))
2703 return IXGBE_SUCCESS;
2704
2705 status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up);
2706 if (status != IXGBE_SUCCESS)
2707 return status;
2708
2709 status = ixgbe_read_eeprom(hw, NVM_INIT_CTRL_3, &hw->eeprom.ctrl_word_3);
2710
2711 if (status != IXGBE_SUCCESS)
2712 return status;
2713
2714 /* If link is down, LPLU disabled in NVM, WoL disabled, or manageability
2715 * disabled, then force link down by entering low power mode.
2716 */
2717 if (!link_up || !(hw->eeprom.ctrl_word_3 & NVM_INIT_CTRL_3_LPLU) ||
2718 !(hw->wol_enabled || ixgbe_mng_present(hw)))
2719 return ixgbe_set_copper_phy_power(hw, FALSE);
2720
2721 /* Determine LCD */
2722 status = ixgbe_get_lcd_t_x550em(hw, &lcd_speed);
2723
2724 if (status != IXGBE_SUCCESS)
2725 return status;
2726
2727 /* If no valid LCD link speed, then force link down and exit. */
2728 if (lcd_speed == IXGBE_LINK_SPEED_UNKNOWN)
2729 return ixgbe_set_copper_phy_power(hw, FALSE);
2730
2731 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_STAT,
2732 IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
2733 &speed);
2734
2735 if (status != IXGBE_SUCCESS)
2736 return status;
2737
2738 /* If no link now, speed is invalid so take link down */
2739 status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up);
2740 if (status != IXGBE_SUCCESS)
2741 return ixgbe_set_copper_phy_power(hw, FALSE);
2742
2743 /* clear everything but the speed bits */
2744 speed &= IXGBE_MDIO_AUTO_NEG_VEN_STAT_SPEED_MASK;
2745
2746 /* If current speed is already LCD, then exit. */
2747 if (((speed == IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB) &&
2748 (lcd_speed == IXGBE_LINK_SPEED_1GB_FULL)) ||
2749 ((speed == IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB) &&
2750 (lcd_speed == IXGBE_LINK_SPEED_10GB_FULL)))
2751 return status;
2752
2753 /* Clear AN completed indication */
2754 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM,
2755 IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
2756 &autoneg_reg);
2757
2758 if (status != IXGBE_SUCCESS)
2759 return status;
2760
2761 status = hw->phy.ops.read_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG,
2762 IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
2763 &an_10g_cntl_reg);
2764
2765 if (status != IXGBE_SUCCESS)
2766 return status;
2767
2768 status = hw->phy.ops.read_reg(hw,
2769 IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
2770 IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
2771 &autoneg_reg);
2772
2773 if (status != IXGBE_SUCCESS)
2774 return status;
2775
2776 save_autoneg = hw->phy.autoneg_advertised;
2777
2778 /* Setup link at least common link speed */
2779 status = hw->mac.ops.setup_link(hw, lcd_speed, FALSE);
2780
2781 /* restore autoneg from before setting lplu speed */
2782 hw->phy.autoneg_advertised = save_autoneg;
2783
2784 return status;
2785}
2786
2787/**
2788 * ixgbe_get_lcd_x550em - Determine lowest common denominator
2789 * @hw: pointer to hardware structure
2790 * @lcd_speed: pointer to lowest common link speed
2791 *
2792 * Determine lowest common link speed with link partner.
2793 **/
2794s32 ixgbe_get_lcd_t_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *lcd_speed)
2795{
2796 u16 an_lp_status;
2797 s32 status;
2798 u16 word = hw->eeprom.ctrl_word_3;
2799
2800 *lcd_speed = IXGBE_LINK_SPEED_UNKNOWN;
2801
2802 status = hw->phy.ops.read_reg(hw, IXGBE_AUTO_NEG_LP_STATUS,
2803 IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
2804 &an_lp_status);
2805
2806 if (status != IXGBE_SUCCESS)
2807 return status;
2808
2809 /* If link partner advertised 1G, return 1G */
2810 if (an_lp_status & IXGBE_AUTO_NEG_LP_1000BASE_CAP) {
2811 *lcd_speed = IXGBE_LINK_SPEED_1GB_FULL;
2812 return status;
2813 }
2814
2815 /* If 10G disabled for LPLU via NVM D10GMP, then return no valid LCD */
2816 if ((hw->bus.lan_id && (word & NVM_INIT_CTRL_3_D10GMP_PORT1)) ||
2817 (word & NVM_INIT_CTRL_3_D10GMP_PORT0))
2818 return status;
2819
2820 /* Link partner not capable of lower speeds, return 10G */
2821 *lcd_speed = IXGBE_LINK_SPEED_10GB_FULL;
2822 return status;
2823}
2824
2825/**
2826 * ixgbe_setup_fc_X550em - Set up flow control
2827 * @hw: pointer to hardware structure
2828 *
2829 * Called at init time to set up flow control.
2830 **/
2831s32 ixgbe_setup_fc_X550em(struct ixgbe_hw *hw)
2832{
2833 s32 ret_val = IXGBE_SUCCESS;
2834 u32 pause, asm_dir, reg_val;
2835
2836 DEBUGFUNC("ixgbe_setup_fc_X550em");
2837
2838 /* Validate the requested mode */
2839 if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) {
2840 ERROR_REPORT1(IXGBE_ERROR_UNSUPPORTED,
2841 "ixgbe_fc_rx_pause not valid in strict IEEE mode\n");
2842 ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
2843 goto out;
2844 }
2845
2846 /* 10gig parts do not have a word in the EEPROM to determine the
2847 * default flow control setting, so we explicitly set it to full.
2848 */
2849 if (hw->fc.requested_mode == ixgbe_fc_default)
2850 hw->fc.requested_mode = ixgbe_fc_full;
2851
2852 /* Determine PAUSE and ASM_DIR bits. */
2853 switch (hw->fc.requested_mode) {
2854 case ixgbe_fc_none:
2855 pause = 0;
2856 asm_dir = 0;
2857 break;
2858 case ixgbe_fc_tx_pause:
2859 pause = 0;
2860 asm_dir = 1;
2861 break;
2862 case ixgbe_fc_rx_pause:
2863 /* Rx Flow control is enabled and Tx Flow control is
2864 * disabled by software override. Since there really
2865 * isn't a way to advertise that we are capable of RX
2866 * Pause ONLY, we will advertise that we support both
2867 * symmetric and asymmetric Rx PAUSE, as such we fall
2868 * through to the fc_full statement. Later, we will
2869 * disable the adapter's ability to send PAUSE frames.
2870 */
2871 case ixgbe_fc_full:
2872 pause = 1;
2873 asm_dir = 1;
2874 break;
2875 default:
2876 ERROR_REPORT1(IXGBE_ERROR_ARGUMENT,
2877 "Flow control param set incorrectly\n");
2878 ret_val = IXGBE_ERR_CONFIG;
2879 goto out;
2880 }
2881
2882 if (hw->device_id == IXGBE_DEV_ID_X550EM_X_KR) {
2883 ret_val = ixgbe_read_iosf_sb_reg_x550(hw,
2884 IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id),
2885 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
2886 if (ret_val != IXGBE_SUCCESS)
2887 goto out;
2888 reg_val &= ~(IXGBE_KRM_AN_CNTL_1_SYM_PAUSE |
2889 IXGBE_KRM_AN_CNTL_1_ASM_PAUSE);
2890 if (pause)
2891 reg_val |= IXGBE_KRM_AN_CNTL_1_SYM_PAUSE;
2892 if (asm_dir)
2893 reg_val |= IXGBE_KRM_AN_CNTL_1_ASM_PAUSE;
2894 ret_val = ixgbe_write_iosf_sb_reg_x550(hw,
2895 IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id),
2896 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
2897
2898 /* This device does not fully support AN. */
2899 hw->fc.disable_fc_autoneg = TRUE;
2900 }
2901
2902out:
2903 return ret_val;
2904}
2905
2906/**
2907 * ixgbe_set_mux - Set mux for port 1 access with CS4227
2908 * @hw: pointer to hardware structure
2909 * @state: set mux if 1, clear if 0
2910 */
2911static void ixgbe_set_mux(struct ixgbe_hw *hw, u8 state)
2912{
2913 u32 esdp;
2914
2915 if (!hw->bus.lan_id)
2916 return;
2917 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
2918 if (state)
2919 esdp |= IXGBE_ESDP_SDP1;
2920 else
2921 esdp &= ~IXGBE_ESDP_SDP1;
2922 IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
2923 IXGBE_WRITE_FLUSH(hw);
2924}
2925
2926/**
2927 * ixgbe_acquire_swfw_sync_X550em - Acquire SWFW semaphore
2928 * @hw: pointer to hardware structure
2929 * @mask: Mask to specify which semaphore to acquire
2930 *
2931 * Acquires the SWFW semaphore and sets the I2C MUX
2932 **/
2933s32 ixgbe_acquire_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask)
2934{
2935 s32 status;
2936
2937 DEBUGFUNC("ixgbe_acquire_swfw_sync_X550em");
2938
2939 status = ixgbe_acquire_swfw_sync_X540(hw, mask);
2940 if (status)
2941 return status;
2942
2943 if (mask & IXGBE_GSSR_I2C_MASK)
2944 ixgbe_set_mux(hw, 1);
2945
2946 return IXGBE_SUCCESS;
2947}
2948
2949/**
2950 * ixgbe_release_swfw_sync_X550em - Release SWFW semaphore
2951 * @hw: pointer to hardware structure
2952 * @mask: Mask to specify which semaphore to release
2953 *
2954 * Releases the SWFW semaphore and sets the I2C MUX
2955 **/
2956void ixgbe_release_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask)
2957{
2958 DEBUGFUNC("ixgbe_release_swfw_sync_X550em");
2959
2960 if (mask & IXGBE_GSSR_I2C_MASK)
2961 ixgbe_set_mux(hw, 0);
2962
2963 ixgbe_release_swfw_sync_X540(hw, mask);
2964}
2965
2966/**
2967 * ixgbe_handle_lasi_ext_t_x550em - Handle external Base T PHY interrupt
2968 * @hw: pointer to hardware structure
2969 *
2970 * Handle external Base T PHY interrupt. If high temperature
2971 * failure alarm then return error, else if link status change
2972 * then setup internal/external PHY link
2973 *
2974 * Return IXGBE_ERR_OVERTEMP if interrupt is high temperature
2975 * failure alarm, else return PHY access status.
2976 */
2977s32 ixgbe_handle_lasi_ext_t_x550em(struct ixgbe_hw *hw)
2978{
2979 bool lsc;
2980 u32 status;
2981
2982 status = ixgbe_get_lasi_ext_t_x550em(hw, &lsc);
2983
2984 if (status != IXGBE_SUCCESS)
2985 return status;
2986
2987 if (lsc)
2988 return ixgbe_setup_internal_phy(hw);
2989
2990 return IXGBE_SUCCESS;
2991}
2992
2993/**
2994 * ixgbe_setup_mac_link_t_X550em - Sets the auto advertised link speed
2995 * @hw: pointer to hardware structure
2996 * @speed: new link speed
2997 * @autoneg_wait_to_complete: TRUE when waiting for completion is needed
2998 *
2999 * Setup internal/external PHY link speed based on link speed, then set
3000 * external PHY auto advertised link speed.
3001 *
3002 * Returns error status for any failure
3003 **/
3004s32 ixgbe_setup_mac_link_t_X550em(struct ixgbe_hw *hw,
3005 ixgbe_link_speed speed,
3006 bool autoneg_wait_to_complete)
3007{
3008 s32 status;
3009 ixgbe_link_speed force_speed;
3010
3011 DEBUGFUNC("ixgbe_setup_mac_link_t_X550em");
3012
3013 /* Setup internal/external PHY link speed to iXFI (10G), unless
3014 * only 1G is auto advertised then setup KX link.
3015 */
3016 if (speed & IXGBE_LINK_SPEED_10GB_FULL)
3017 force_speed = IXGBE_LINK_SPEED_10GB_FULL;
3018 else
3019 force_speed = IXGBE_LINK_SPEED_1GB_FULL;
3020
3021 /* If internal link mode is XFI, then setup XFI internal link. */
3022 if (!(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) {
3023 status = ixgbe_setup_ixfi_x550em(hw, &force_speed);
3024
3025 if (status != IXGBE_SUCCESS)
3026 return status;
3027 }
3028
3029 return hw->phy.ops.setup_link_speed(hw, speed, autoneg_wait_to_complete);
3030}
3031
3032/**
3033 * ixgbe_check_link_t_X550em - Determine link and speed status
3034 * @hw: pointer to hardware structure
3035 * @speed: pointer to link speed
3036 * @link_up: TRUE when link is up
3037 * @link_up_wait_to_complete: bool used to wait for link up or not
3038 *
3039 * Check that both the MAC and X557 external PHY have link.
3040 **/
3041s32 ixgbe_check_link_t_X550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
3042 bool *link_up, bool link_up_wait_to_complete)
3043{
3044 u32 status;
3045 u16 autoneg_status;
3046
3047 if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper)
3048 return IXGBE_ERR_CONFIG;
3049
3050 status = ixgbe_check_mac_link_generic(hw, speed, link_up,
3051 link_up_wait_to_complete);
3052
3053 /* If check link fails or MAC link is not up, then return */
3054 if (status != IXGBE_SUCCESS || !(*link_up))
3055 return status;
3056
3057 /* MAC link is up, so check external PHY link.
3058 * Read this twice back to back to indicate current status.
3059 */
3060 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
3061 IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
3062 &autoneg_status);
3063
3064 if (status != IXGBE_SUCCESS)
3065 return status;
3066
3067 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
3068 IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
3069 &autoneg_status);
3070
3071 if (status != IXGBE_SUCCESS)
3072 return status;
3073
3074 /* If external PHY link is not up, then indicate link not up */
3075 if (!(autoneg_status & IXGBE_MDIO_AUTO_NEG_LINK_STATUS))
3076 *link_up = FALSE;
3077
3078 return IXGBE_SUCCESS;
3079}
3080
3081/**
3082 * ixgbe_reset_phy_t_X550em - Performs X557 PHY reset and enables LASI
3083 * @hw: pointer to hardware structure
3084 **/
3085s32 ixgbe_reset_phy_t_X550em(struct ixgbe_hw *hw)
3086{
3087 s32 status;
3088
3089 status = ixgbe_reset_phy_generic(hw);
3090
3091 if (status != IXGBE_SUCCESS)
3092 return status;
3093
3094 /* Configure Link Status Alarm and Temperature Threshold interrupts */
3095 return ixgbe_enable_lasi_ext_t_x550em(hw);
3096}
3097
3098/**
3099 * ixgbe_led_on_t_X550em - Turns on the software controllable LEDs.
3100 * @hw: pointer to hardware structure
3101 * @led_idx: led number to turn on
3102 **/
3103s32 ixgbe_led_on_t_X550em(struct ixgbe_hw *hw, u32 led_idx)
3104{
3105 u16 phy_data;
3106
3107 DEBUGFUNC("ixgbe_led_on_t_X550em");
3108
3109 if (led_idx >= IXGBE_X557_MAX_LED_INDEX)
3110 return IXGBE_ERR_PARAM;
3111
3112 /* To turn on the LED, set mode to ON. */
3113 ixgbe_read_phy_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx,
3114 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, &phy_data);
3115 phy_data |= IXGBE_X557_LED_MANUAL_SET_MASK;
3116 ixgbe_write_phy_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx,
3117 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, phy_data);
3118
3119 return IXGBE_SUCCESS;
3120}
3121
3122/**
3123 * ixgbe_led_off_t_X550em - Turns off the software controllable LEDs.
3124 * @hw: pointer to hardware structure
3125 * @led_idx: led number to turn off
3126 **/
3127s32 ixgbe_led_off_t_X550em(struct ixgbe_hw *hw, u32 led_idx)
3128{
3129 u16 phy_data;
3130
3131 DEBUGFUNC("ixgbe_led_off_t_X550em");
3132
3133 if (led_idx >= IXGBE_X557_MAX_LED_INDEX)
3134 return IXGBE_ERR_PARAM;
3135
3136 /* To turn on the LED, set mode to ON. */
3137 ixgbe_read_phy_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx,
3138 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, &phy_data);
3139 phy_data &= ~IXGBE_X557_LED_MANUAL_SET_MASK;
3140 ixgbe_write_phy_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx,
3141 IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, phy_data);
3142
3143 return IXGBE_SUCCESS;
3144}
3145