1/******************************************************************************
2
3 Copyright (c) 2001-2017, Intel Corporation
4 All rights reserved.
5
6 Redistribution and use in source and binary forms, with or without
7 modification, are permitted provided that the following conditions are met:
8
9 1. Redistributions of source code must retain the above copyright notice,
10 this list of conditions and the following disclaimer.
11
12 2. Redistributions in binary form must reproduce the above copyright
13 notice, this list of conditions and the following disclaimer in the
14 documentation and/or other materials provided with the distribution.
15
16 3. Neither the name of the Intel Corporation nor the names of its
17 contributors may be used to endorse or promote products derived from
18 this software without specific prior written permission.
19
20 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
21 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23 ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
24 LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
25 CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
26 SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
27 INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
28 CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
29 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
30 POSSIBILITY OF SUCH DAMAGE.
31
32******************************************************************************/
33/*$FreeBSD: stable/11/sys/dev/ixgbe/ixgbe_api.c 320897 2017-07-11 21:25:07Z erj $*/
34
35#include "ixgbe_api.h"
36#include "ixgbe_common.h"
37
38#define IXGBE_EMPTY_PARAM
39
40static const u32 ixgbe_mvals_base[IXGBE_MVALS_IDX_LIMIT] = {
41 IXGBE_MVALS_INIT(IXGBE_EMPTY_PARAM)
42};
43
44static const u32 ixgbe_mvals_X540[IXGBE_MVALS_IDX_LIMIT] = {
45 IXGBE_MVALS_INIT(_X540)
46};
47
48static const u32 ixgbe_mvals_X550[IXGBE_MVALS_IDX_LIMIT] = {
49 IXGBE_MVALS_INIT(_X550)
50};
51
52static const u32 ixgbe_mvals_X550EM_x[IXGBE_MVALS_IDX_LIMIT] = {
53 IXGBE_MVALS_INIT(_X550EM_x)
54};
55
56static const u32 ixgbe_mvals_X550EM_a[IXGBE_MVALS_IDX_LIMIT] = {
57 IXGBE_MVALS_INIT(_X550EM_a)
58};
59
60/**
61 * ixgbe_dcb_get_rtrup2tc - read rtrup2tc reg
62 * @hw: pointer to hardware structure
63 * @map: pointer to u8 arr for returning map
64 *
65 * Read the rtrup2tc HW register and resolve its content into map
66 **/
67void ixgbe_dcb_get_rtrup2tc(struct ixgbe_hw *hw, u8 *map)
68{
69 if (hw->mac.ops.get_rtrup2tc)
70 hw->mac.ops.get_rtrup2tc(hw, map);
71}
72
73/**
74 * ixgbe_init_shared_code - Initialize the shared code
75 * @hw: pointer to hardware structure
76 *
77 * This will assign function pointers and assign the MAC type and PHY code.
78 * Does not touch the hardware. This function must be called prior to any
79 * other function in the shared code. The ixgbe_hw structure should be
80 * memset to 0 prior to calling this function. The following fields in
81 * hw structure should be filled in prior to calling this function:
82 * hw_addr, back, device_id, vendor_id, subsystem_device_id,
83 * subsystem_vendor_id, and revision_id
84 **/
85s32 ixgbe_init_shared_code(struct ixgbe_hw *hw)
86{
87 s32 status;
88
89 DEBUGFUNC("ixgbe_init_shared_code");
90
91 /*
92 * Set the mac type
93 */
94 ixgbe_set_mac_type(hw);
95
96 switch (hw->mac.type) {
97 case ixgbe_mac_82598EB:
98 status = ixgbe_init_ops_82598(hw);
99 break;
100 case ixgbe_mac_82599EB:
101 status = ixgbe_init_ops_82599(hw);
102 break;
103 case ixgbe_mac_X540:
104 status = ixgbe_init_ops_X540(hw);
105 break;
106 case ixgbe_mac_X550:
107 status = ixgbe_init_ops_X550(hw);
108 break;
109 case ixgbe_mac_X550EM_x:
110 status = ixgbe_init_ops_X550EM_x(hw);
111 break;
112 case ixgbe_mac_X550EM_a:
113 status = ixgbe_init_ops_X550EM_a(hw);
114 break;
115 default:
116 status = IXGBE_ERR_DEVICE_NOT_SUPPORTED;
117 break;
118 }
119 hw->mac.max_link_up_time = IXGBE_LINK_UP_TIME;
120
121 return status;
122}
123
124/**
125 * ixgbe_set_mac_type - Sets MAC type
126 * @hw: pointer to the HW structure
127 *
128 * This function sets the mac type of the adapter based on the
129 * vendor ID and device ID stored in the hw structure.
130 **/
131s32 ixgbe_set_mac_type(struct ixgbe_hw *hw)
132{
133 s32 ret_val = IXGBE_SUCCESS;
134
135 DEBUGFUNC("ixgbe_set_mac_type\n");
136
137 if (hw->vendor_id != IXGBE_INTEL_VENDOR_ID) {
138 ERROR_REPORT2(IXGBE_ERROR_UNSUPPORTED,
139 "Unsupported vendor id: %x", hw->vendor_id);
140 return IXGBE_ERR_DEVICE_NOT_SUPPORTED;
141 }
142
143 hw->mvals = ixgbe_mvals_base;
144
145 switch (hw->device_id) {
146 case IXGBE_DEV_ID_82598:
147 case IXGBE_DEV_ID_82598_BX:
148 case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
149 case IXGBE_DEV_ID_82598AF_DUAL_PORT:
150 case IXGBE_DEV_ID_82598AT:
151 case IXGBE_DEV_ID_82598AT2:
152 case IXGBE_DEV_ID_82598EB_CX4:
153 case IXGBE_DEV_ID_82598_CX4_DUAL_PORT:
154 case IXGBE_DEV_ID_82598_DA_DUAL_PORT:
155 case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM:
156 case IXGBE_DEV_ID_82598EB_XF_LR:
157 case IXGBE_DEV_ID_82598EB_SFP_LOM:
158 hw->mac.type = ixgbe_mac_82598EB;
159 break;
160 case IXGBE_DEV_ID_82599_KX4:
161 case IXGBE_DEV_ID_82599_KX4_MEZZ:
162 case IXGBE_DEV_ID_82599_XAUI_LOM:
163 case IXGBE_DEV_ID_82599_COMBO_BACKPLANE:
164 case IXGBE_DEV_ID_82599_KR:
165 case IXGBE_DEV_ID_82599_SFP:
166 case IXGBE_DEV_ID_82599_BACKPLANE_FCOE:
167 case IXGBE_DEV_ID_82599_SFP_FCOE:
168 case IXGBE_DEV_ID_82599_SFP_EM:
169 case IXGBE_DEV_ID_82599_SFP_SF2:
170 case IXGBE_DEV_ID_82599_SFP_SF_QP:
171 case IXGBE_DEV_ID_82599_QSFP_SF_QP:
172 case IXGBE_DEV_ID_82599EN_SFP:
173 case IXGBE_DEV_ID_82599_CX4:
174 case IXGBE_DEV_ID_82599_BYPASS:
175 case IXGBE_DEV_ID_82599_T3_LOM:
176 hw->mac.type = ixgbe_mac_82599EB;
177 break;
178 case IXGBE_DEV_ID_X540T:
179 case IXGBE_DEV_ID_X540T1:
180 case IXGBE_DEV_ID_X540_BYPASS:
181 hw->mac.type = ixgbe_mac_X540;
182 hw->mvals = ixgbe_mvals_X540;
183 break;
184 case IXGBE_DEV_ID_X550T:
185 case IXGBE_DEV_ID_X550T1:
186 hw->mac.type = ixgbe_mac_X550;
187 hw->mvals = ixgbe_mvals_X550;
188 break;
189 case IXGBE_DEV_ID_X550EM_X_KX4:
190 case IXGBE_DEV_ID_X550EM_X_KR:
191 case IXGBE_DEV_ID_X550EM_X_10G_T:
192 case IXGBE_DEV_ID_X550EM_X_1G_T:
193 case IXGBE_DEV_ID_X550EM_X_SFP:
194 case IXGBE_DEV_ID_X550EM_X_XFI:
195 hw->mac.type = ixgbe_mac_X550EM_x;
196 hw->mvals = ixgbe_mvals_X550EM_x;
197 break;
198 case IXGBE_DEV_ID_X550EM_A_KR:
199 case IXGBE_DEV_ID_X550EM_A_KR_L:
200 case IXGBE_DEV_ID_X550EM_A_SFP_N:
201 case IXGBE_DEV_ID_X550EM_A_SGMII:
202 case IXGBE_DEV_ID_X550EM_A_SGMII_L:
203 case IXGBE_DEV_ID_X550EM_A_1G_T:
204 case IXGBE_DEV_ID_X550EM_A_1G_T_L:
205 case IXGBE_DEV_ID_X550EM_A_10G_T:
206 case IXGBE_DEV_ID_X550EM_A_QSFP:
207 case IXGBE_DEV_ID_X550EM_A_QSFP_N:
208 case IXGBE_DEV_ID_X550EM_A_SFP:
209 hw->mac.type = ixgbe_mac_X550EM_a;
210 hw->mvals = ixgbe_mvals_X550EM_a;
211 break;
212 default:
213 ret_val = IXGBE_ERR_DEVICE_NOT_SUPPORTED;
214 ERROR_REPORT2(IXGBE_ERROR_UNSUPPORTED,
215 "Unsupported device id: %x",
216 hw->device_id);
217 break;
218 }
219
220 DEBUGOUT2("ixgbe_set_mac_type found mac: %d, returns: %d\n",
221 hw->mac.type, ret_val);
222 return ret_val;
223}
224
225/**
226 * ixgbe_init_hw - Initialize the hardware
227 * @hw: pointer to hardware structure
228 *
229 * Initialize the hardware by resetting and then starting the hardware
230 **/
231s32 ixgbe_init_hw(struct ixgbe_hw *hw)
232{
233 return ixgbe_call_func(hw, hw->mac.ops.init_hw, (hw),
234 IXGBE_NOT_IMPLEMENTED);
235}
236
237/**
238 * ixgbe_reset_hw - Performs a hardware reset
239 * @hw: pointer to hardware structure
240 *
241 * Resets the hardware by resetting the transmit and receive units, masks and
242 * clears all interrupts, performs a PHY reset, and performs a MAC reset
243 **/
244s32 ixgbe_reset_hw(struct ixgbe_hw *hw)
245{
246 return ixgbe_call_func(hw, hw->mac.ops.reset_hw, (hw),
247 IXGBE_NOT_IMPLEMENTED);
248}
249
250/**
251 * ixgbe_start_hw - Prepares hardware for Rx/Tx
252 * @hw: pointer to hardware structure
253 *
254 * Starts the hardware by filling the bus info structure and media type,
255 * clears all on chip counters, initializes receive address registers,
256 * multicast table, VLAN filter table, calls routine to setup link and
257 * flow control settings, and leaves transmit and receive units disabled
258 * and uninitialized.
259 **/
260s32 ixgbe_start_hw(struct ixgbe_hw *hw)
261{
262 return ixgbe_call_func(hw, hw->mac.ops.start_hw, (hw),
263 IXGBE_NOT_IMPLEMENTED);
264}
265
266/**
267 * ixgbe_enable_relaxed_ordering - Enables tx relaxed ordering,
268 * which is disabled by default in ixgbe_start_hw();
269 *
270 * @hw: pointer to hardware structure
271 *
272 * Enable relaxed ordering;
273 **/
274void ixgbe_enable_relaxed_ordering(struct ixgbe_hw *hw)
275{
276 if (hw->mac.ops.enable_relaxed_ordering)
277 hw->mac.ops.enable_relaxed_ordering(hw);
278}
279
280/**
281 * ixgbe_clear_hw_cntrs - Clear hardware counters
282 * @hw: pointer to hardware structure
283 *
284 * Clears all hardware statistics counters by reading them from the hardware
285 * Statistics counters are clear on read.
286 **/
287s32 ixgbe_clear_hw_cntrs(struct ixgbe_hw *hw)
288{
289 return ixgbe_call_func(hw, hw->mac.ops.clear_hw_cntrs, (hw),
290 IXGBE_NOT_IMPLEMENTED);
291}
292
293/**
294 * ixgbe_get_media_type - Get media type
295 * @hw: pointer to hardware structure
296 *
297 * Returns the media type (fiber, copper, backplane)
298 **/
299enum ixgbe_media_type ixgbe_get_media_type(struct ixgbe_hw *hw)
300{
301 return ixgbe_call_func(hw, hw->mac.ops.get_media_type, (hw),
302 ixgbe_media_type_unknown);
303}
304
305/**
306 * ixgbe_get_mac_addr - Get MAC address
307 * @hw: pointer to hardware structure
308 * @mac_addr: Adapter MAC address
309 *
310 * Reads the adapter's MAC address from the first Receive Address Register
311 * (RAR0) A reset of the adapter must have been performed prior to calling
312 * this function in order for the MAC address to have been loaded from the
313 * EEPROM into RAR0
314 **/
315s32 ixgbe_get_mac_addr(struct ixgbe_hw *hw, u8 *mac_addr)
316{
317 return ixgbe_call_func(hw, hw->mac.ops.get_mac_addr,
318 (hw, mac_addr), IXGBE_NOT_IMPLEMENTED);
319}
320
321/**
322 * ixgbe_get_san_mac_addr - Get SAN MAC address
323 * @hw: pointer to hardware structure
324 * @san_mac_addr: SAN MAC address
325 *
326 * Reads the SAN MAC address from the EEPROM, if it's available. This is
327 * per-port, so set_lan_id() must be called before reading the addresses.
328 **/
329s32 ixgbe_get_san_mac_addr(struct ixgbe_hw *hw, u8 *san_mac_addr)
330{
331 return ixgbe_call_func(hw, hw->mac.ops.get_san_mac_addr,
332 (hw, san_mac_addr), IXGBE_NOT_IMPLEMENTED);
333}
334
335/**
336 * ixgbe_set_san_mac_addr - Write a SAN MAC address
337 * @hw: pointer to hardware structure
338 * @san_mac_addr: SAN MAC address
339 *
340 * Writes A SAN MAC address to the EEPROM.
341 **/
342s32 ixgbe_set_san_mac_addr(struct ixgbe_hw *hw, u8 *san_mac_addr)
343{
344 return ixgbe_call_func(hw, hw->mac.ops.set_san_mac_addr,
345 (hw, san_mac_addr), IXGBE_NOT_IMPLEMENTED);
346}
347
348/**
349 * ixgbe_get_device_caps - Get additional device capabilities
350 * @hw: pointer to hardware structure
351 * @device_caps: the EEPROM word for device capabilities
352 *
353 * Reads the extra device capabilities from the EEPROM
354 **/
355s32 ixgbe_get_device_caps(struct ixgbe_hw *hw, u16 *device_caps)
356{
357 return ixgbe_call_func(hw, hw->mac.ops.get_device_caps,
358 (hw, device_caps), IXGBE_NOT_IMPLEMENTED);
359}
360
361/**
362 * ixgbe_get_wwn_prefix - Get alternative WWNN/WWPN prefix from the EEPROM
363 * @hw: pointer to hardware structure
364 * @wwnn_prefix: the alternative WWNN prefix
365 * @wwpn_prefix: the alternative WWPN prefix
366 *
367 * This function will read the EEPROM from the alternative SAN MAC address
368 * block to check the support for the alternative WWNN/WWPN prefix support.
369 **/
370s32 ixgbe_get_wwn_prefix(struct ixgbe_hw *hw, u16 *wwnn_prefix,
371 u16 *wwpn_prefix)
372{
373 return ixgbe_call_func(hw, hw->mac.ops.get_wwn_prefix,
374 (hw, wwnn_prefix, wwpn_prefix),
375 IXGBE_NOT_IMPLEMENTED);
376}
377
378/**
379 * ixgbe_get_fcoe_boot_status - Get FCOE boot status from EEPROM
380 * @hw: pointer to hardware structure
381 * @bs: the fcoe boot status
382 *
383 * This function will read the FCOE boot status from the iSCSI FCOE block
384 **/
385s32 ixgbe_get_fcoe_boot_status(struct ixgbe_hw *hw, u16 *bs)
386{
387 return ixgbe_call_func(hw, hw->mac.ops.get_fcoe_boot_status,
388 (hw, bs),
389 IXGBE_NOT_IMPLEMENTED);
390}
391
392/**
393 * ixgbe_get_bus_info - Set PCI bus info
394 * @hw: pointer to hardware structure
395 *
396 * Sets the PCI bus info (speed, width, type) within the ixgbe_hw structure
397 **/
398s32 ixgbe_get_bus_info(struct ixgbe_hw *hw)
399{
400 return ixgbe_call_func(hw, hw->mac.ops.get_bus_info, (hw),
401 IXGBE_NOT_IMPLEMENTED);
402}
403
404/**
405 * ixgbe_get_num_of_tx_queues - Get Tx queues
406 * @hw: pointer to hardware structure
407 *
408 * Returns the number of transmit queues for the given adapter.
409 **/
410u32 ixgbe_get_num_of_tx_queues(struct ixgbe_hw *hw)
411{
412 return hw->mac.max_tx_queues;
413}
414
415/**
416 * ixgbe_get_num_of_rx_queues - Get Rx queues
417 * @hw: pointer to hardware structure
418 *
419 * Returns the number of receive queues for the given adapter.
420 **/
421u32 ixgbe_get_num_of_rx_queues(struct ixgbe_hw *hw)
422{
423 return hw->mac.max_rx_queues;
424}
425
426/**
427 * ixgbe_stop_adapter - Disable Rx/Tx units
428 * @hw: pointer to hardware structure
429 *
430 * Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts,
431 * disables transmit and receive units. The adapter_stopped flag is used by
432 * the shared code and drivers to determine if the adapter is in a stopped
433 * state and should not touch the hardware.
434 **/
435s32 ixgbe_stop_adapter(struct ixgbe_hw *hw)
436{
437 return ixgbe_call_func(hw, hw->mac.ops.stop_adapter, (hw),
438 IXGBE_NOT_IMPLEMENTED);
439}
440
441/**
442 * ixgbe_read_pba_string - Reads part number string from EEPROM
443 * @hw: pointer to hardware structure
444 * @pba_num: stores the part number string from the EEPROM
445 * @pba_num_size: part number string buffer length
446 *
447 * Reads the part number string from the EEPROM.
448 **/
449s32 ixgbe_read_pba_string(struct ixgbe_hw *hw, u8 *pba_num, u32 pba_num_size)
450{
451 return ixgbe_read_pba_string_generic(hw, pba_num, pba_num_size);
452}
453
454/**
455 * ixgbe_read_pba_num - Reads part number from EEPROM
456 * @hw: pointer to hardware structure
457 * @pba_num: stores the part number from the EEPROM
458 *
459 * Reads the part number from the EEPROM.
460 **/
461s32 ixgbe_read_pba_num(struct ixgbe_hw *hw, u32 *pba_num)
462{
463 return ixgbe_read_pba_num_generic(hw, pba_num);
464}
465
466/**
467 * ixgbe_identify_phy - Get PHY type
468 * @hw: pointer to hardware structure
469 *
470 * Determines the physical layer module found on the current adapter.
471 **/
472s32 ixgbe_identify_phy(struct ixgbe_hw *hw)
473{
474 s32 status = IXGBE_SUCCESS;
475
476 if (hw->phy.type == ixgbe_phy_unknown) {
477 status = ixgbe_call_func(hw, hw->phy.ops.identify, (hw),
478 IXGBE_NOT_IMPLEMENTED);
479 }
480
481 return status;
482}
483
484/**
485 * ixgbe_reset_phy - Perform a PHY reset
486 * @hw: pointer to hardware structure
487 **/
488s32 ixgbe_reset_phy(struct ixgbe_hw *hw)
489{
490 s32 status = IXGBE_SUCCESS;
491
492 if (hw->phy.type == ixgbe_phy_unknown) {
493 if (ixgbe_identify_phy(hw) != IXGBE_SUCCESS)
494 status = IXGBE_ERR_PHY;
495 }
496
497 if (status == IXGBE_SUCCESS) {
498 status = ixgbe_call_func(hw, hw->phy.ops.reset, (hw),
499 IXGBE_NOT_IMPLEMENTED);
500 }
501 return status;
502}
503
504/**
505 * ixgbe_get_phy_firmware_version -
506 * @hw: pointer to hardware structure
507 * @firmware_version: pointer to firmware version
508 **/
509s32 ixgbe_get_phy_firmware_version(struct ixgbe_hw *hw, u16 *firmware_version)
510{
511 s32 status = IXGBE_SUCCESS;
512
513 status = ixgbe_call_func(hw, hw->phy.ops.get_firmware_version,
514 (hw, firmware_version),
515 IXGBE_NOT_IMPLEMENTED);
516 return status;
517}
518
519/**
520 * ixgbe_read_phy_reg - Read PHY register
521 * @hw: pointer to hardware structure
522 * @reg_addr: 32 bit address of PHY register to read
523 * @phy_data: Pointer to read data from PHY register
524 *
525 * Reads a value from a specified PHY register
526 **/
527s32 ixgbe_read_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
528 u16 *phy_data)
529{
530 if (hw->phy.id == 0)
531 ixgbe_identify_phy(hw);
532
533 return ixgbe_call_func(hw, hw->phy.ops.read_reg, (hw, reg_addr,
534 device_type, phy_data), IXGBE_NOT_IMPLEMENTED);
535}
536
537/**
538 * ixgbe_write_phy_reg - Write PHY register
539 * @hw: pointer to hardware structure
540 * @reg_addr: 32 bit PHY register to write
541 * @phy_data: Data to write to the PHY register
542 *
543 * Writes a value to specified PHY register
544 **/
545s32 ixgbe_write_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
546 u16 phy_data)
547{
548 if (hw->phy.id == 0)
549 ixgbe_identify_phy(hw);
550
551 return ixgbe_call_func(hw, hw->phy.ops.write_reg, (hw, reg_addr,
552 device_type, phy_data), IXGBE_NOT_IMPLEMENTED);
553}
554
555/**
556 * ixgbe_setup_phy_link - Restart PHY autoneg
557 * @hw: pointer to hardware structure
558 *
559 * Restart autonegotiation and PHY and waits for completion.
560 **/
561s32 ixgbe_setup_phy_link(struct ixgbe_hw *hw)
562{
563 return ixgbe_call_func(hw, hw->phy.ops.setup_link, (hw),
564 IXGBE_NOT_IMPLEMENTED);
565}
566
567/**
568 * ixgbe_setup_internal_phy - Configure integrated PHY
569 * @hw: pointer to hardware structure
570 *
571 * Reconfigure the integrated PHY in order to enable talk to the external PHY.
572 * Returns success if not implemented, since nothing needs to be done in this
573 * case.
574 */
575s32 ixgbe_setup_internal_phy(struct ixgbe_hw *hw)
576{
577 return ixgbe_call_func(hw, hw->phy.ops.setup_internal_link, (hw),
578 IXGBE_SUCCESS);
579}
580
581/**
582 * ixgbe_check_phy_link - Determine link and speed status
583 * @hw: pointer to hardware structure
584 *
585 * Reads a PHY register to determine if link is up and the current speed for
586 * the PHY.
587 **/
588s32 ixgbe_check_phy_link(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
589 bool *link_up)
590{
591 return ixgbe_call_func(hw, hw->phy.ops.check_link, (hw, speed,
592 link_up), IXGBE_NOT_IMPLEMENTED);
593}
594
595/**
596 * ixgbe_setup_phy_link_speed - Set auto advertise
597 * @hw: pointer to hardware structure
598 * @speed: new link speed
599 *
600 * Sets the auto advertised capabilities
601 **/
602s32 ixgbe_setup_phy_link_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed,
603 bool autoneg_wait_to_complete)
604{
605 return ixgbe_call_func(hw, hw->phy.ops.setup_link_speed, (hw, speed,
606 autoneg_wait_to_complete),
607 IXGBE_NOT_IMPLEMENTED);
608}
609
610/**
611 * ixgbe_set_phy_power - Control the phy power state
612 * @hw: pointer to hardware structure
613 * @on: TRUE for on, FALSE for off
614 */
615s32 ixgbe_set_phy_power(struct ixgbe_hw *hw, bool on)
616{
617 return ixgbe_call_func(hw, hw->phy.ops.set_phy_power, (hw, on),
618 IXGBE_NOT_IMPLEMENTED);
619}
620
621/**
622 * ixgbe_check_link - Get link and speed status
623 * @hw: pointer to hardware structure
624 *
625 * Reads the links register to determine if link is up and the current speed
626 **/
627s32 ixgbe_check_link(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
628 bool *link_up, bool link_up_wait_to_complete)
629{
630 return ixgbe_call_func(hw, hw->mac.ops.check_link, (hw, speed,
631 link_up, link_up_wait_to_complete),
632 IXGBE_NOT_IMPLEMENTED);
633}
634
635/**
636 * ixgbe_disable_tx_laser - Disable Tx laser
637 * @hw: pointer to hardware structure
638 *
639 * If the driver needs to disable the laser on SFI optics.
640 **/
641void ixgbe_disable_tx_laser(struct ixgbe_hw *hw)
642{
643 if (hw->mac.ops.disable_tx_laser)
644 hw->mac.ops.disable_tx_laser(hw);
645}
646
647/**
648 * ixgbe_enable_tx_laser - Enable Tx laser
649 * @hw: pointer to hardware structure
650 *
651 * If the driver needs to enable the laser on SFI optics.
652 **/
653void ixgbe_enable_tx_laser(struct ixgbe_hw *hw)
654{
655 if (hw->mac.ops.enable_tx_laser)
656 hw->mac.ops.enable_tx_laser(hw);
657}
658
659/**
660 * ixgbe_flap_tx_laser - flap Tx laser to start autotry process
661 * @hw: pointer to hardware structure
662 *
663 * When the driver changes the link speeds that it can support then
664 * flap the tx laser to alert the link partner to start autotry
665 * process on its end.
666 **/
667void ixgbe_flap_tx_laser(struct ixgbe_hw *hw)
668{
669 if (hw->mac.ops.flap_tx_laser)
670 hw->mac.ops.flap_tx_laser(hw);
671}
672
673/**
674 * ixgbe_setup_link - Set link speed
675 * @hw: pointer to hardware structure
676 * @speed: new link speed
677 *
678 * Configures link settings. Restarts the link.
679 * Performs autonegotiation if needed.
680 **/
681s32 ixgbe_setup_link(struct ixgbe_hw *hw, ixgbe_link_speed speed,
682 bool autoneg_wait_to_complete)
683{
684 return ixgbe_call_func(hw, hw->mac.ops.setup_link, (hw, speed,
685 autoneg_wait_to_complete),
686 IXGBE_NOT_IMPLEMENTED);
687}
688
689/**
690 * ixgbe_setup_mac_link - Set link speed
691 * @hw: pointer to hardware structure
692 * @speed: new link speed
693 *
694 * Configures link settings. Restarts the link.
695 * Performs autonegotiation if needed.
696 **/
697s32 ixgbe_setup_mac_link(struct ixgbe_hw *hw, ixgbe_link_speed speed,
698 bool autoneg_wait_to_complete)
699{
700 return ixgbe_call_func(hw, hw->mac.ops.setup_mac_link, (hw, speed,
701 autoneg_wait_to_complete),
702 IXGBE_NOT_IMPLEMENTED);
703}
704
705/**
706 * ixgbe_get_link_capabilities - Returns link capabilities
707 * @hw: pointer to hardware structure
708 *
709 * Determines the link capabilities of the current configuration.
710 **/
711s32 ixgbe_get_link_capabilities(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
712 bool *autoneg)
713{
714 return ixgbe_call_func(hw, hw->mac.ops.get_link_capabilities, (hw,
715 speed, autoneg), IXGBE_NOT_IMPLEMENTED);
716}
717
718/**
719 * ixgbe_led_on - Turn on LEDs
720 * @hw: pointer to hardware structure
721 * @index: led number to turn on
722 *
723 * Turns on the software controllable LEDs.
724 **/
725s32 ixgbe_led_on(struct ixgbe_hw *hw, u32 index)
726{
727 return ixgbe_call_func(hw, hw->mac.ops.led_on, (hw, index),
728 IXGBE_NOT_IMPLEMENTED);
729}
730
731/**
732 * ixgbe_led_off - Turn off LEDs
733 * @hw: pointer to hardware structure
734 * @index: led number to turn off
735 *
736 * Turns off the software controllable LEDs.
737 **/
738s32 ixgbe_led_off(struct ixgbe_hw *hw, u32 index)
739{
740 return ixgbe_call_func(hw, hw->mac.ops.led_off, (hw, index),
741 IXGBE_NOT_IMPLEMENTED);
742}
743
744/**
745 * ixgbe_blink_led_start - Blink LEDs
746 * @hw: pointer to hardware structure
747 * @index: led number to blink
748 *
749 * Blink LED based on index.
750 **/
751s32 ixgbe_blink_led_start(struct ixgbe_hw *hw, u32 index)
752{
753 return ixgbe_call_func(hw, hw->mac.ops.blink_led_start, (hw, index),
754 IXGBE_NOT_IMPLEMENTED);
755}
756
757/**
758 * ixgbe_blink_led_stop - Stop blinking LEDs
759 * @hw: pointer to hardware structure
760 *
761 * Stop blinking LED based on index.
762 **/
763s32 ixgbe_blink_led_stop(struct ixgbe_hw *hw, u32 index)
764{
765 return ixgbe_call_func(hw, hw->mac.ops.blink_led_stop, (hw, index),
766 IXGBE_NOT_IMPLEMENTED);
767}
768
769/**
770 * ixgbe_init_eeprom_params - Initialize EEPROM parameters
771 * @hw: pointer to hardware structure
772 *
773 * Initializes the EEPROM parameters ixgbe_eeprom_info within the
774 * ixgbe_hw struct in order to set up EEPROM access.
775 **/
776s32 ixgbe_init_eeprom_params(struct ixgbe_hw *hw)
777{
778 return ixgbe_call_func(hw, hw->eeprom.ops.init_params, (hw),
779 IXGBE_NOT_IMPLEMENTED);
780}
781
782
783/**
784 * ixgbe_write_eeprom - Write word to EEPROM
785 * @hw: pointer to hardware structure
786 * @offset: offset within the EEPROM to be written to
787 * @data: 16 bit word to be written to the EEPROM
788 *
789 * Writes 16 bit value to EEPROM. If ixgbe_eeprom_update_checksum is not
790 * called after this function, the EEPROM will most likely contain an
791 * invalid checksum.
792 **/
793s32 ixgbe_write_eeprom(struct ixgbe_hw *hw, u16 offset, u16 data)
794{
795 return ixgbe_call_func(hw, hw->eeprom.ops.write, (hw, offset, data),
796 IXGBE_NOT_IMPLEMENTED);
797}
798
799/**
800 * ixgbe_write_eeprom_buffer - Write word(s) to EEPROM
801 * @hw: pointer to hardware structure
802 * @offset: offset within the EEPROM to be written to
803 * @data: 16 bit word(s) to be written to the EEPROM
804 * @words: number of words
805 *
806 * Writes 16 bit word(s) to EEPROM. If ixgbe_eeprom_update_checksum is not
807 * called after this function, the EEPROM will most likely contain an
808 * invalid checksum.
809 **/
810s32 ixgbe_write_eeprom_buffer(struct ixgbe_hw *hw, u16 offset, u16 words,
811 u16 *data)
812{
813 return ixgbe_call_func(hw, hw->eeprom.ops.write_buffer,
814 (hw, offset, words, data),
815 IXGBE_NOT_IMPLEMENTED);
816}
817
818/**
819 * ixgbe_read_eeprom - Read word from EEPROM
820 * @hw: pointer to hardware structure
821 * @offset: offset within the EEPROM to be read
822 * @data: read 16 bit value from EEPROM
823 *
824 * Reads 16 bit value from EEPROM
825 **/
826s32 ixgbe_read_eeprom(struct ixgbe_hw *hw, u16 offset, u16 *data)
827{
828 return ixgbe_call_func(hw, hw->eeprom.ops.read, (hw, offset, data),
829 IXGBE_NOT_IMPLEMENTED);
830}
831
832/**
833 * ixgbe_read_eeprom_buffer - Read word(s) from EEPROM
834 * @hw: pointer to hardware structure
835 * @offset: offset within the EEPROM to be read
836 * @data: read 16 bit word(s) from EEPROM
837 * @words: number of words
838 *
839 * Reads 16 bit word(s) from EEPROM
840 **/
841s32 ixgbe_read_eeprom_buffer(struct ixgbe_hw *hw, u16 offset,
842 u16 words, u16 *data)
843{
844 return ixgbe_call_func(hw, hw->eeprom.ops.read_buffer,
845 (hw, offset, words, data),
846 IXGBE_NOT_IMPLEMENTED);
847}
848
849/**
850 * ixgbe_validate_eeprom_checksum - Validate EEPROM checksum
851 * @hw: pointer to hardware structure
852 * @checksum_val: calculated checksum
853 *
854 * Performs checksum calculation and validates the EEPROM checksum
855 **/
856s32 ixgbe_validate_eeprom_checksum(struct ixgbe_hw *hw, u16 *checksum_val)
857{
858 return ixgbe_call_func(hw, hw->eeprom.ops.validate_checksum,
859 (hw, checksum_val), IXGBE_NOT_IMPLEMENTED);
860}
861
862/**
863 * ixgbe_eeprom_update_checksum - Updates the EEPROM checksum
864 * @hw: pointer to hardware structure
865 **/
866s32 ixgbe_update_eeprom_checksum(struct ixgbe_hw *hw)
867{
868 return ixgbe_call_func(hw, hw->eeprom.ops.update_checksum, (hw),
869 IXGBE_NOT_IMPLEMENTED);
870}
871
872/**
873 * ixgbe_insert_mac_addr - Find a RAR for this mac address
874 * @hw: pointer to hardware structure
875 * @addr: Address to put into receive address register
876 * @vmdq: VMDq pool to assign
877 *
878 * Puts an ethernet address into a receive address register, or
879 * finds the rar that it is already in; adds to the pool list
880 **/
881s32 ixgbe_insert_mac_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq)
882{
883 return ixgbe_call_func(hw, hw->mac.ops.insert_mac_addr,
884 (hw, addr, vmdq),
885 IXGBE_NOT_IMPLEMENTED);
886}
887
888/**
889 * ixgbe_set_rar - Set Rx address register
890 * @hw: pointer to hardware structure
891 * @index: Receive address register to write
892 * @addr: Address to put into receive address register
893 * @vmdq: VMDq "set"
894 * @enable_addr: set flag that address is active
895 *
896 * Puts an ethernet address into a receive address register.
897 **/
898s32 ixgbe_set_rar(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
899 u32 enable_addr)
900{
901 return ixgbe_call_func(hw, hw->mac.ops.set_rar, (hw, index, addr, vmdq,
902 enable_addr), IXGBE_NOT_IMPLEMENTED);
903}
904
905/**
906 * ixgbe_clear_rar - Clear Rx address register
907 * @hw: pointer to hardware structure
908 * @index: Receive address register to write
909 *
910 * Puts an ethernet address into a receive address register.
911 **/
912s32 ixgbe_clear_rar(struct ixgbe_hw *hw, u32 index)
913{
914 return ixgbe_call_func(hw, hw->mac.ops.clear_rar, (hw, index),
915 IXGBE_NOT_IMPLEMENTED);
916}
917
918/**
919 * ixgbe_set_vmdq - Associate a VMDq index with a receive address
920 * @hw: pointer to hardware structure
921 * @rar: receive address register index to associate with VMDq index
922 * @vmdq: VMDq set or pool index
923 **/
924s32 ixgbe_set_vmdq(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
925{
926 return ixgbe_call_func(hw, hw->mac.ops.set_vmdq, (hw, rar, vmdq),
927 IXGBE_NOT_IMPLEMENTED);
928
929}
930
931/**
932 * ixgbe_set_vmdq_san_mac - Associate VMDq index 127 with a receive address
933 * @hw: pointer to hardware structure
934 * @vmdq: VMDq default pool index
935 **/
936s32 ixgbe_set_vmdq_san_mac(struct ixgbe_hw *hw, u32 vmdq)
937{
938 return ixgbe_call_func(hw, hw->mac.ops.set_vmdq_san_mac,
939 (hw, vmdq), IXGBE_NOT_IMPLEMENTED);
940}
941
942/**
943 * ixgbe_clear_vmdq - Disassociate a VMDq index from a receive address
944 * @hw: pointer to hardware structure
945 * @rar: receive address register index to disassociate with VMDq index
946 * @vmdq: VMDq set or pool index
947 **/
948s32 ixgbe_clear_vmdq(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
949{
950 return ixgbe_call_func(hw, hw->mac.ops.clear_vmdq, (hw, rar, vmdq),
951 IXGBE_NOT_IMPLEMENTED);
952}
953
954/**
955 * ixgbe_init_rx_addrs - Initializes receive address filters.
956 * @hw: pointer to hardware structure
957 *
958 * Places the MAC address in receive address register 0 and clears the rest
959 * of the receive address registers. Clears the multicast table. Assumes
960 * the receiver is in reset when the routine is called.
961 **/
962s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw)
963{
964 return ixgbe_call_func(hw, hw->mac.ops.init_rx_addrs, (hw),
965 IXGBE_NOT_IMPLEMENTED);
966}
967
968/**
969 * ixgbe_get_num_rx_addrs - Returns the number of RAR entries.
970 * @hw: pointer to hardware structure
971 **/
972u32 ixgbe_get_num_rx_addrs(struct ixgbe_hw *hw)
973{
974 return hw->mac.num_rar_entries;
975}
976
977/**
978 * ixgbe_update_uc_addr_list - Updates the MAC's list of secondary addresses
979 * @hw: pointer to hardware structure
980 * @addr_list: the list of new multicast addresses
981 * @addr_count: number of addresses
982 * @func: iterator function to walk the multicast address list
983 *
984 * The given list replaces any existing list. Clears the secondary addrs from
985 * receive address registers. Uses unused receive address registers for the
986 * first secondary addresses, and falls back to promiscuous mode as needed.
987 **/
988s32 ixgbe_update_uc_addr_list(struct ixgbe_hw *hw, u8 *addr_list,
989 u32 addr_count, ixgbe_mc_addr_itr func)
990{
991 return ixgbe_call_func(hw, hw->mac.ops.update_uc_addr_list, (hw,
992 addr_list, addr_count, func),
993 IXGBE_NOT_IMPLEMENTED);
994}
995
996/**
997 * ixgbe_update_mc_addr_list - Updates the MAC's list of multicast addresses
998 * @hw: pointer to hardware structure
999 * @mc_addr_list: the list of new multicast addresses
1000 * @mc_addr_count: number of addresses
1001 * @func: iterator function to walk the multicast address list
1002 *
1003 * The given list replaces any existing list. Clears the MC addrs from receive
1004 * address registers and the multicast table. Uses unused receive address
1005 * registers for the first multicast addresses, and hashes the rest into the
1006 * multicast table.
1007 **/
1008s32 ixgbe_update_mc_addr_list(struct ixgbe_hw *hw, u8 *mc_addr_list,
1009 u32 mc_addr_count, ixgbe_mc_addr_itr func,
1010 bool clear)
1011{
1012 return ixgbe_call_func(hw, hw->mac.ops.update_mc_addr_list, (hw,
1013 mc_addr_list, mc_addr_count, func, clear),
1014 IXGBE_NOT_IMPLEMENTED);
1015}
1016
1017/**
1018 * ixgbe_enable_mc - Enable multicast address in RAR
1019 * @hw: pointer to hardware structure
1020 *
1021 * Enables multicast address in RAR and the use of the multicast hash table.
1022 **/
1023s32 ixgbe_enable_mc(struct ixgbe_hw *hw)
1024{
1025 return ixgbe_call_func(hw, hw->mac.ops.enable_mc, (hw),
1026 IXGBE_NOT_IMPLEMENTED);
1027}
1028
1029/**
1030 * ixgbe_disable_mc - Disable multicast address in RAR
1031 * @hw: pointer to hardware structure
1032 *
1033 * Disables multicast address in RAR and the use of the multicast hash table.
1034 **/
1035s32 ixgbe_disable_mc(struct ixgbe_hw *hw)
1036{
1037 return ixgbe_call_func(hw, hw->mac.ops.disable_mc, (hw),
1038 IXGBE_NOT_IMPLEMENTED);
1039}
1040
1041/**
1042 * ixgbe_clear_vfta - Clear VLAN filter table
1043 * @hw: pointer to hardware structure
1044 *
1045 * Clears the VLAN filer table, and the VMDq index associated with the filter
1046 **/
1047s32 ixgbe_clear_vfta(struct ixgbe_hw *hw)
1048{
1049 return ixgbe_call_func(hw, hw->mac.ops.clear_vfta, (hw),
1050 IXGBE_NOT_IMPLEMENTED);
1051}
1052
1053/**
1054 * ixgbe_set_vfta - Set VLAN filter table
1055 * @hw: pointer to hardware structure
1056 * @vlan: VLAN id to write to VLAN filter
1057 * @vind: VMDq output index that maps queue to VLAN id in VLVFB
1058 * @vlan_on: boolean flag to turn on/off VLAN
1059 * @vlvf_bypass: boolean flag indicating updating the default pool is okay
1060 *
1061 * Turn on/off specified VLAN in the VLAN filter table.
1062 **/
1063s32 ixgbe_set_vfta(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on,
1064 bool vlvf_bypass)
1065{
1066 return ixgbe_call_func(hw, hw->mac.ops.set_vfta, (hw, vlan, vind,
1067 vlan_on, vlvf_bypass), IXGBE_NOT_IMPLEMENTED);
1068}
1069
1070/**
1071 * ixgbe_set_vlvf - Set VLAN Pool Filter
1072 * @hw: pointer to hardware structure
1073 * @vlan: VLAN id to write to VLAN filter
1074 * @vind: VMDq output index that maps queue to VLAN id in VLVFB
1075 * @vlan_on: boolean flag to turn on/off VLAN in VLVF
1076 * @vfta_delta: pointer to the difference between the current value of VFTA
1077 * and the desired value
1078 * @vfta: the desired value of the VFTA
1079 * @vlvf_bypass: boolean flag indicating updating the default pool is okay
1080 *
1081 * Turn on/off specified bit in VLVF table.
1082 **/
1083s32 ixgbe_set_vlvf(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on,
1084 u32 *vfta_delta, u32 vfta, bool vlvf_bypass)
1085{
1086 return ixgbe_call_func(hw, hw->mac.ops.set_vlvf, (hw, vlan, vind,
1087 vlan_on, vfta_delta, vfta, vlvf_bypass),
1088 IXGBE_NOT_IMPLEMENTED);
1089}
1090
1091/**
1092 * ixgbe_fc_enable - Enable flow control
1093 * @hw: pointer to hardware structure
1094 *
1095 * Configures the flow control settings based on SW configuration.
1096 **/
1097s32 ixgbe_fc_enable(struct ixgbe_hw *hw)
1098{
1099 return ixgbe_call_func(hw, hw->mac.ops.fc_enable, (hw),
1100 IXGBE_NOT_IMPLEMENTED);
1101}
1102
1103/**
1104 * ixgbe_setup_fc - Set up flow control
1105 * @hw: pointer to hardware structure
1106 *
1107 * Called at init time to set up flow control.
1108 **/
1109s32 ixgbe_setup_fc(struct ixgbe_hw *hw)
1110{
1111 return ixgbe_call_func(hw, hw->mac.ops.setup_fc, (hw),
1112 IXGBE_NOT_IMPLEMENTED);
1113}
1114
1115/**
1116 * ixgbe_set_fw_drv_ver - Try to send the driver version number FW
1117 * @hw: pointer to hardware structure
1118 * @maj: driver major number to be sent to firmware
1119 * @min: driver minor number to be sent to firmware
1120 * @build: driver build number to be sent to firmware
1121 * @ver: driver version number to be sent to firmware
1122 * @len: length of driver_ver string
1123 * @driver_ver: driver string
1124 **/
1125s32 ixgbe_set_fw_drv_ver(struct ixgbe_hw *hw, u8 maj, u8 min, u8 build,
1126 u8 ver, u16 len, char *driver_ver)
1127{
1128 return ixgbe_call_func(hw, hw->mac.ops.set_fw_drv_ver, (hw, maj, min,
1129 build, ver, len, driver_ver),
1130 IXGBE_NOT_IMPLEMENTED);
1131}
1132
1133
1134
1135/**
1136 * ixgbe_dmac_config - Configure DMA Coalescing registers.
1137 * @hw: pointer to hardware structure
1138 *
1139 * Configure DMA coalescing. If enabling dmac, dmac is activated.
1140 * When disabling dmac, dmac enable dmac bit is cleared.
1141 **/
1142s32 ixgbe_dmac_config(struct ixgbe_hw *hw)
1143{
1144 return ixgbe_call_func(hw, hw->mac.ops.dmac_config, (hw),
1145 IXGBE_NOT_IMPLEMENTED);
1146}
1147
1148/**
1149 * ixgbe_dmac_update_tcs - Configure DMA Coalescing registers.
1150 * @hw: pointer to hardware structure
1151 *
1152 * Disables dmac, updates per TC settings, and then enable dmac.
1153 **/
1154s32 ixgbe_dmac_update_tcs(struct ixgbe_hw *hw)
1155{
1156 return ixgbe_call_func(hw, hw->mac.ops.dmac_update_tcs, (hw),
1157 IXGBE_NOT_IMPLEMENTED);
1158}
1159
1160/**
1161 * ixgbe_dmac_config_tcs - Configure DMA Coalescing registers.
1162 * @hw: pointer to hardware structure
1163 *
1164 * Configure DMA coalescing threshold per TC and set high priority bit for
1165 * FCOE TC. The dmac enable bit must be cleared before configuring.
1166 **/
1167s32 ixgbe_dmac_config_tcs(struct ixgbe_hw *hw)
1168{
1169 return ixgbe_call_func(hw, hw->mac.ops.dmac_config_tcs, (hw),
1170 IXGBE_NOT_IMPLEMENTED);
1171}
1172
1173/**
1174 * ixgbe_setup_eee - Enable/disable EEE support
1175 * @hw: pointer to the HW structure
1176 * @enable_eee: boolean flag to enable EEE
1177 *
1178 * Enable/disable EEE based on enable_ee flag.
1179 * Auto-negotiation must be started after BASE-T EEE bits in PHY register 7.3C
1180 * are modified.
1181 *
1182 **/
1183s32 ixgbe_setup_eee(struct ixgbe_hw *hw, bool enable_eee)
1184{
1185 return ixgbe_call_func(hw, hw->mac.ops.setup_eee, (hw, enable_eee),
1186 IXGBE_NOT_IMPLEMENTED);
1187}
1188
1189/**
1190 * ixgbe_set_source_address_pruning - Enable/Disable source address pruning
1191 * @hw: pointer to hardware structure
1192 * @enbale: enable or disable source address pruning
1193 * @pool: Rx pool - Rx pool to toggle source address pruning
1194 **/
1195void ixgbe_set_source_address_pruning(struct ixgbe_hw *hw, bool enable,
1196 unsigned int pool)
1197{
1198 if (hw->mac.ops.set_source_address_pruning)
1199 hw->mac.ops.set_source_address_pruning(hw, enable, pool);
1200}
1201
1202/**
1203 * ixgbe_set_ethertype_anti_spoofing - Enable/Disable Ethertype anti-spoofing
1204 * @hw: pointer to hardware structure
1205 * @enable: enable or disable switch for Ethertype anti-spoofing
1206 * @vf: Virtual Function pool - VF Pool to set for Ethertype anti-spoofing
1207 *
1208 **/
1209void ixgbe_set_ethertype_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf)
1210{
1211 if (hw->mac.ops.set_ethertype_anti_spoofing)
1212 hw->mac.ops.set_ethertype_anti_spoofing(hw, enable, vf);
1213}
1214
1215/**
1216 * ixgbe_read_iosf_sb_reg - Read 32 bit PHY register
1217 * @hw: pointer to hardware structure
1218 * @reg_addr: 32 bit address of PHY register to read
1219 * @device_type: type of device you want to communicate with
1220 * @phy_data: Pointer to read data from PHY register
1221 *
1222 * Reads a value from a specified PHY register
1223 **/
1224s32 ixgbe_read_iosf_sb_reg(struct ixgbe_hw *hw, u32 reg_addr,
1225 u32 device_type, u32 *phy_data)
1226{
1227 return ixgbe_call_func(hw, hw->mac.ops.read_iosf_sb_reg, (hw, reg_addr,
1228 device_type, phy_data), IXGBE_NOT_IMPLEMENTED);
1229}
1230
1231/**
1232 * ixgbe_write_iosf_sb_reg - Write 32 bit register through IOSF Sideband
1233 * @hw: pointer to hardware structure
1234 * @reg_addr: 32 bit PHY register to write
1235 * @device_type: type of device you want to communicate with
1236 * @phy_data: Data to write to the PHY register
1237 *
1238 * Writes a value to specified PHY register
1239 **/
1240s32 ixgbe_write_iosf_sb_reg(struct ixgbe_hw *hw, u32 reg_addr,
1241 u32 device_type, u32 phy_data)
1242{
1243 return ixgbe_call_func(hw, hw->mac.ops.write_iosf_sb_reg, (hw, reg_addr,
1244 device_type, phy_data), IXGBE_NOT_IMPLEMENTED);
1245}
1246
1247/**
1248 * ixgbe_disable_mdd - Disable malicious driver detection
1249 * @hw: pointer to hardware structure
1250 *
1251 **/
1252void ixgbe_disable_mdd(struct ixgbe_hw *hw)
1253{
1254 if (hw->mac.ops.disable_mdd)
1255 hw->mac.ops.disable_mdd(hw);
1256}
1257
1258/**
1259 * ixgbe_enable_mdd - Enable malicious driver detection
1260 * @hw: pointer to hardware structure
1261 *
1262 **/
1263void ixgbe_enable_mdd(struct ixgbe_hw *hw)
1264{
1265 if (hw->mac.ops.enable_mdd)
1266 hw->mac.ops.enable_mdd(hw);
1267}
1268
1269/**
1270 * ixgbe_mdd_event - Handle malicious driver detection event
1271 * @hw: pointer to hardware structure
1272 * @vf_bitmap: vf bitmap of malicious vfs
1273 *
1274 **/
1275void ixgbe_mdd_event(struct ixgbe_hw *hw, u32 *vf_bitmap)
1276{
1277 if (hw->mac.ops.mdd_event)
1278 hw->mac.ops.mdd_event(hw, vf_bitmap);
1279}
1280
1281/**
1282 * ixgbe_restore_mdd_vf - Restore VF that was disabled during malicious driver
1283 * detection event
1284 * @hw: pointer to hardware structure
1285 * @vf: vf index
1286 *
1287 **/
1288void ixgbe_restore_mdd_vf(struct ixgbe_hw *hw, u32 vf)
1289{
1290 if (hw->mac.ops.restore_mdd_vf)
1291 hw->mac.ops.restore_mdd_vf(hw, vf);
1292}
1293
1294/**
1295 * ixgbe_enter_lplu - Transition to low power states
1296 * @hw: pointer to hardware structure
1297 *
1298 * Configures Low Power Link Up on transition to low power states
1299 * (from D0 to non-D0).
1300 **/
1301s32 ixgbe_enter_lplu(struct ixgbe_hw *hw)
1302{
1303 return ixgbe_call_func(hw, hw->phy.ops.enter_lplu, (hw),
1304 IXGBE_NOT_IMPLEMENTED);
1305}
1306
1307/**
1308 * ixgbe_handle_lasi - Handle external Base T PHY interrupt
1309 * @hw: pointer to hardware structure
1310 *
1311 * Handle external Base T PHY interrupt. If high temperature
1312 * failure alarm then return error, else if link status change
1313 * then setup internal/external PHY link
1314 *
1315 * Return IXGBE_ERR_OVERTEMP if interrupt is high temperature
1316 * failure alarm, else return PHY access status.
1317 */
1318s32 ixgbe_handle_lasi(struct ixgbe_hw *hw)
1319{
1320 return ixgbe_call_func(hw, hw->phy.ops.handle_lasi, (hw),
1321 IXGBE_NOT_IMPLEMENTED);
1322}
1323
1324/**
1325 * ixgbe_bypass_rw - Bit bang data into by_pass FW
1326 * @hw: pointer to hardware structure
1327 * @cmd: Command we send to the FW
1328 * @status: The reply from the FW
1329 *
1330 * Bit-bangs the cmd to the by_pass FW status points to what is returned.
1331 **/
1332s32 ixgbe_bypass_rw(struct ixgbe_hw *hw, u32 cmd, u32 *status)
1333{
1334 return ixgbe_call_func(hw, hw->mac.ops.bypass_rw, (hw, cmd, status),
1335 IXGBE_NOT_IMPLEMENTED);
1336}
1337
1338/**
1339 * ixgbe_bypass_valid_rd - Verify valid return from bit-bang.
1340 *
1341 * If we send a write we can't be sure it took until we can read back
1342 * that same register. It can be a problem as some of the feilds may
1343 * for valid reasons change inbetween the time wrote the register and
1344 * we read it again to verify. So this function check everything we
1345 * can check and then assumes it worked.
1346 *
1347 * @u32 in_reg - The register cmd for the bit-bang read.
1348 * @u32 out_reg - The register returned from a bit-bang read.
1349 **/
1350bool ixgbe_bypass_valid_rd(struct ixgbe_hw *hw, u32 in_reg, u32 out_reg)
1351{
1352 return ixgbe_call_func(hw, hw->mac.ops.bypass_valid_rd,
1353 (in_reg, out_reg), IXGBE_NOT_IMPLEMENTED);
1354}
1355
1356/**
1357 * ixgbe_bypass_set - Set a bypass field in the FW CTRL Regiter.
1358 * @hw: pointer to hardware structure
1359 * @cmd: The control word we are setting.
1360 * @event: The event we are setting in the FW. This also happens to
1361 * be the mask for the event we are setting (handy)
1362 * @action: The action we set the event to in the FW. This is in a
1363 * bit field that happens to be what we want to put in
1364 * the event spot (also handy)
1365 *
1366 * Writes to the cmd control the bits in actions.
1367 **/
1368s32 ixgbe_bypass_set(struct ixgbe_hw *hw, u32 cmd, u32 event, u32 action)
1369{
1370 return ixgbe_call_func(hw, hw->mac.ops.bypass_set,
1371 (hw, cmd, event, action),
1372 IXGBE_NOT_IMPLEMENTED);
1373}
1374
1375/**
1376 * ixgbe_bypass_rd_eep - Read the bypass FW eeprom address
1377 * @hw: pointer to hardware structure
1378 * @addr: The bypass eeprom address to read.
1379 * @value: The 8b of data at the address above.
1380 **/
1381s32 ixgbe_bypass_rd_eep(struct ixgbe_hw *hw, u32 addr, u8 *value)
1382{
1383 return ixgbe_call_func(hw, hw->mac.ops.bypass_rd_eep,
1384 (hw, addr, value), IXGBE_NOT_IMPLEMENTED);
1385}
1386
1387/**
1388 * ixgbe_read_analog_reg8 - Reads 8 bit analog register
1389 * @hw: pointer to hardware structure
1390 * @reg: analog register to read
1391 * @val: read value
1392 *
1393 * Performs write operation to analog register specified.
1394 **/
1395s32 ixgbe_read_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 *val)
1396{
1397 return ixgbe_call_func(hw, hw->mac.ops.read_analog_reg8, (hw, reg,
1398 val), IXGBE_NOT_IMPLEMENTED);
1399}
1400
1401/**
1402 * ixgbe_write_analog_reg8 - Writes 8 bit analog register
1403 * @hw: pointer to hardware structure
1404 * @reg: analog register to write
1405 * @val: value to write
1406 *
1407 * Performs write operation to Atlas analog register specified.
1408 **/
1409s32 ixgbe_write_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 val)
1410{
1411 return ixgbe_call_func(hw, hw->mac.ops.write_analog_reg8, (hw, reg,
1412 val), IXGBE_NOT_IMPLEMENTED);
1413}
1414
1415/**
1416 * ixgbe_init_uta_tables - Initializes Unicast Table Arrays.
1417 * @hw: pointer to hardware structure
1418 *
1419 * Initializes the Unicast Table Arrays to zero on device load. This
1420 * is part of the Rx init addr execution path.
1421 **/
1422s32 ixgbe_init_uta_tables(struct ixgbe_hw *hw)
1423{
1424 return ixgbe_call_func(hw, hw->mac.ops.init_uta_tables, (hw),
1425 IXGBE_NOT_IMPLEMENTED);
1426}
1427
1428/**
1429 * ixgbe_read_i2c_byte - Reads 8 bit word over I2C at specified device address
1430 * @hw: pointer to hardware structure
1431 * @byte_offset: byte offset to read
1432 * @dev_addr: I2C bus address to read from
1433 * @data: value read
1434 *
1435 * Performs byte read operation to SFP module's EEPROM over I2C interface.
1436 **/
1437s32 ixgbe_read_i2c_byte(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr,
1438 u8 *data)
1439{
1440 return ixgbe_call_func(hw, hw->phy.ops.read_i2c_byte, (hw, byte_offset,
1441 dev_addr, data), IXGBE_NOT_IMPLEMENTED);
1442}
1443
1444/**
1445 * ixgbe_read_i2c_byte_unlocked - Reads 8 bit word via I2C from device address
1446 * @hw: pointer to hardware structure
1447 * @byte_offset: byte offset to read
1448 * @dev_addr: I2C bus address to read from
1449 * @data: value read
1450 *
1451 * Performs byte read operation to SFP module's EEPROM over I2C interface.
1452 **/
1453s32 ixgbe_read_i2c_byte_unlocked(struct ixgbe_hw *hw, u8 byte_offset,
1454 u8 dev_addr, u8 *data)
1455{
1456 return ixgbe_call_func(hw, hw->phy.ops.read_i2c_byte_unlocked,
1457 (hw, byte_offset, dev_addr, data),
1458 IXGBE_NOT_IMPLEMENTED);
1459}
1460
1461/**
1462 * ixgbe_read_link - Perform read operation on link device
1463 * @hw: pointer to the hardware structure
1464 * @addr: bus address to read from
1465 * @reg: device register to read from
1466 * @val: pointer to location to receive read value
1467 *
1468 * Returns an error code on error.
1469 */
1470s32 ixgbe_read_link(struct ixgbe_hw *hw, u8 addr, u16 reg, u16 *val)
1471{
1472 return ixgbe_call_func(hw, hw->link.ops.read_link, (hw, addr,
1473 reg, val), IXGBE_NOT_IMPLEMENTED);
1474}
1475
1476/**
1477 * ixgbe_read_link_unlocked - Perform read operation on link device
1478 * @hw: pointer to the hardware structure
1479 * @addr: bus address to read from
1480 * @reg: device register to read from
1481 * @val: pointer to location to receive read value
1482 *
1483 * Returns an error code on error.
1484 **/
1485s32 ixgbe_read_link_unlocked(struct ixgbe_hw *hw, u8 addr, u16 reg, u16 *val)
1486{
1487 return ixgbe_call_func(hw, hw->link.ops.read_link_unlocked,
1488 (hw, addr, reg, val), IXGBE_NOT_IMPLEMENTED);
1489}
1490
1491/**
1492 * ixgbe_write_i2c_byte - Writes 8 bit word over I2C
1493 * @hw: pointer to hardware structure
1494 * @byte_offset: byte offset to write
1495 * @dev_addr: I2C bus address to write to
1496 * @data: value to write
1497 *
1498 * Performs byte write operation to SFP module's EEPROM over I2C interface
1499 * at a specified device address.
1500 **/
1501s32 ixgbe_write_i2c_byte(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr,
1502 u8 data)
1503{
1504 return ixgbe_call_func(hw, hw->phy.ops.write_i2c_byte, (hw, byte_offset,
1505 dev_addr, data), IXGBE_NOT_IMPLEMENTED);
1506}
1507
1508/**
1509 * ixgbe_write_i2c_byte_unlocked - Writes 8 bit word over I2C
1510 * @hw: pointer to hardware structure
1511 * @byte_offset: byte offset to write
1512 * @dev_addr: I2C bus address to write to
1513 * @data: value to write
1514 *
1515 * Performs byte write operation to SFP module's EEPROM over I2C interface
1516 * at a specified device address.
1517 **/
1518s32 ixgbe_write_i2c_byte_unlocked(struct ixgbe_hw *hw, u8 byte_offset,
1519 u8 dev_addr, u8 data)
1520{
1521 return ixgbe_call_func(hw, hw->phy.ops.write_i2c_byte_unlocked,
1522 (hw, byte_offset, dev_addr, data),
1523 IXGBE_NOT_IMPLEMENTED);
1524}
1525
1526/**
1527 * ixgbe_write_link - Perform write operation on link device
1528 * @hw: pointer to the hardware structure
1529 * @addr: bus address to write to
1530 * @reg: device register to write to
1531 * @val: value to write
1532 *
1533 * Returns an error code on error.
1534 */
1535s32 ixgbe_write_link(struct ixgbe_hw *hw, u8 addr, u16 reg, u16 val)
1536{
1537 return ixgbe_call_func(hw, hw->link.ops.write_link,
1538 (hw, addr, reg, val), IXGBE_NOT_IMPLEMENTED);
1539}
1540
1541/**
1542 * ixgbe_write_link_unlocked - Perform write operation on link device
1543 * @hw: pointer to the hardware structure
1544 * @addr: bus address to write to
1545 * @reg: device register to write to
1546 * @val: value to write
1547 *
1548 * Returns an error code on error.
1549 **/
1550s32 ixgbe_write_link_unlocked(struct ixgbe_hw *hw, u8 addr, u16 reg, u16 val)
1551{
1552 return ixgbe_call_func(hw, hw->link.ops.write_link_unlocked,
1553 (hw, addr, reg, val), IXGBE_NOT_IMPLEMENTED);
1554}
1555
1556/**
1557 * ixgbe_write_i2c_eeprom - Writes 8 bit EEPROM word over I2C interface
1558 * @hw: pointer to hardware structure
1559 * @byte_offset: EEPROM byte offset to write
1560 * @eeprom_data: value to write
1561 *
1562 * Performs byte write operation to SFP module's EEPROM over I2C interface.
1563 **/
1564s32 ixgbe_write_i2c_eeprom(struct ixgbe_hw *hw,
1565 u8 byte_offset, u8 eeprom_data)
1566{
1567 return ixgbe_call_func(hw, hw->phy.ops.write_i2c_eeprom,
1568 (hw, byte_offset, eeprom_data),
1569 IXGBE_NOT_IMPLEMENTED);
1570}
1571
1572/**
1573 * ixgbe_read_i2c_eeprom - Reads 8 bit EEPROM word over I2C interface
1574 * @hw: pointer to hardware structure
1575 * @byte_offset: EEPROM byte offset to read
1576 * @eeprom_data: value read
1577 *
1578 * Performs byte read operation to SFP module's EEPROM over I2C interface.
1579 **/
1580s32 ixgbe_read_i2c_eeprom(struct ixgbe_hw *hw, u8 byte_offset, u8 *eeprom_data)
1581{
1582 return ixgbe_call_func(hw, hw->phy.ops.read_i2c_eeprom,
1583 (hw, byte_offset, eeprom_data),
1584 IXGBE_NOT_IMPLEMENTED);
1585}
1586
1587/**
1588 * ixgbe_get_supported_physical_layer - Returns physical layer type
1589 * @hw: pointer to hardware structure
1590 *
1591 * Determines physical layer capabilities of the current configuration.
1592 **/
1593u64 ixgbe_get_supported_physical_layer(struct ixgbe_hw *hw)
1594{
1595 return ixgbe_call_func(hw, hw->mac.ops.get_supported_physical_layer,
1596 (hw), IXGBE_PHYSICAL_LAYER_UNKNOWN);
1597}
1598
1599/**
1600 * ixgbe_enable_rx_dma - Enables Rx DMA unit, dependent on device specifics
1601 * @hw: pointer to hardware structure
1602 * @regval: bitfield to write to the Rx DMA register
1603 *
1604 * Enables the Rx DMA unit of the device.
1605 **/
1606s32 ixgbe_enable_rx_dma(struct ixgbe_hw *hw, u32 regval)
1607{
1608 return ixgbe_call_func(hw, hw->mac.ops.enable_rx_dma,
1609 (hw, regval), IXGBE_NOT_IMPLEMENTED);
1610}
1611
1612/**
1613 * ixgbe_disable_sec_rx_path - Stops the receive data path
1614 * @hw: pointer to hardware structure
1615 *
1616 * Stops the receive data path.
1617 **/
1618s32 ixgbe_disable_sec_rx_path(struct ixgbe_hw *hw)
1619{
1620 return ixgbe_call_func(hw, hw->mac.ops.disable_sec_rx_path,
1621 (hw), IXGBE_NOT_IMPLEMENTED);
1622}
1623
1624/**
1625 * ixgbe_enable_sec_rx_path - Enables the receive data path
1626 * @hw: pointer to hardware structure
1627 *
1628 * Enables the receive data path.
1629 **/
1630s32 ixgbe_enable_sec_rx_path(struct ixgbe_hw *hw)
1631{
1632 return ixgbe_call_func(hw, hw->mac.ops.enable_sec_rx_path,
1633 (hw), IXGBE_NOT_IMPLEMENTED);
1634}
1635
1636/**
1637 * ixgbe_acquire_swfw_semaphore - Acquire SWFW semaphore
1638 * @hw: pointer to hardware structure
1639 * @mask: Mask to specify which semaphore to acquire
1640 *
1641 * Acquires the SWFW semaphore through SW_FW_SYNC register for the specified
1642 * function (CSR, PHY0, PHY1, EEPROM, Flash)
1643 **/
1644s32 ixgbe_acquire_swfw_semaphore(struct ixgbe_hw *hw, u32 mask)
1645{
1646 return ixgbe_call_func(hw, hw->mac.ops.acquire_swfw_sync,
1647 (hw, mask), IXGBE_NOT_IMPLEMENTED);
1648}
1649
1650/**
1651 * ixgbe_release_swfw_semaphore - Release SWFW semaphore
1652 * @hw: pointer to hardware structure
1653 * @mask: Mask to specify which semaphore to release
1654 *
1655 * Releases the SWFW semaphore through SW_FW_SYNC register for the specified
1656 * function (CSR, PHY0, PHY1, EEPROM, Flash)
1657 **/
1658void ixgbe_release_swfw_semaphore(struct ixgbe_hw *hw, u32 mask)
1659{
1660 if (hw->mac.ops.release_swfw_sync)
1661 hw->mac.ops.release_swfw_sync(hw, mask);
1662}
1663
1664/**
1665 * ixgbe_init_swfw_semaphore - Clean up SWFW semaphore
1666 * @hw: pointer to hardware structure
1667 *
1668 * Attempts to acquire the SWFW semaphore through SW_FW_SYNC register.
1669 * Regardless of whether is succeeds or not it then release the semaphore.
1670 * This is function is called to recover from catastrophic failures that
1671 * may have left the semaphore locked.
1672 **/
1673void ixgbe_init_swfw_semaphore(struct ixgbe_hw *hw)
1674{
1675 if (hw->mac.ops.init_swfw_sync)
1676 hw->mac.ops.init_swfw_sync(hw);
1677}
1678
1679
1680void ixgbe_disable_rx(struct ixgbe_hw *hw)
1681{
1682 if (hw->mac.ops.disable_rx)
1683 hw->mac.ops.disable_rx(hw);
1684}
1685
1686void ixgbe_enable_rx(struct ixgbe_hw *hw)
1687{
1688 if (hw->mac.ops.enable_rx)
1689 hw->mac.ops.enable_rx(hw);
1690}
1691
1692/**
1693 * ixgbe_set_rate_select_speed - Set module link speed
1694 * @hw: pointer to hardware structure
1695 * @speed: link speed to set
1696 *
1697 * Set module link speed via the rate select.
1698 */
1699void ixgbe_set_rate_select_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed)
1700{
1701 if (hw->mac.ops.set_rate_select_speed)
1702 hw->mac.ops.set_rate_select_speed(hw, speed);
1703}
2
3 Copyright (c) 2001-2017, Intel Corporation
4 All rights reserved.
5
6 Redistribution and use in source and binary forms, with or without
7 modification, are permitted provided that the following conditions are met:
8
9 1. Redistributions of source code must retain the above copyright notice,
10 this list of conditions and the following disclaimer.
11
12 2. Redistributions in binary form must reproduce the above copyright
13 notice, this list of conditions and the following disclaimer in the
14 documentation and/or other materials provided with the distribution.
15
16 3. Neither the name of the Intel Corporation nor the names of its
17 contributors may be used to endorse or promote products derived from
18 this software without specific prior written permission.
19
20 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
21 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23 ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
24 LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
25 CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
26 SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
27 INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
28 CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
29 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
30 POSSIBILITY OF SUCH DAMAGE.
31
32******************************************************************************/
33/*$FreeBSD: stable/11/sys/dev/ixgbe/ixgbe_api.c 320897 2017-07-11 21:25:07Z erj $*/
34
35#include "ixgbe_api.h"
36#include "ixgbe_common.h"
37
38#define IXGBE_EMPTY_PARAM
39
40static const u32 ixgbe_mvals_base[IXGBE_MVALS_IDX_LIMIT] = {
41 IXGBE_MVALS_INIT(IXGBE_EMPTY_PARAM)
42};
43
44static const u32 ixgbe_mvals_X540[IXGBE_MVALS_IDX_LIMIT] = {
45 IXGBE_MVALS_INIT(_X540)
46};
47
48static const u32 ixgbe_mvals_X550[IXGBE_MVALS_IDX_LIMIT] = {
49 IXGBE_MVALS_INIT(_X550)
50};
51
52static const u32 ixgbe_mvals_X550EM_x[IXGBE_MVALS_IDX_LIMIT] = {
53 IXGBE_MVALS_INIT(_X550EM_x)
54};
55
56static const u32 ixgbe_mvals_X550EM_a[IXGBE_MVALS_IDX_LIMIT] = {
57 IXGBE_MVALS_INIT(_X550EM_a)
58};
59
60/**
61 * ixgbe_dcb_get_rtrup2tc - read rtrup2tc reg
62 * @hw: pointer to hardware structure
63 * @map: pointer to u8 arr for returning map
64 *
65 * Read the rtrup2tc HW register and resolve its content into map
66 **/
67void ixgbe_dcb_get_rtrup2tc(struct ixgbe_hw *hw, u8 *map)
68{
69 if (hw->mac.ops.get_rtrup2tc)
70 hw->mac.ops.get_rtrup2tc(hw, map);
71}
72
73/**
74 * ixgbe_init_shared_code - Initialize the shared code
75 * @hw: pointer to hardware structure
76 *
77 * This will assign function pointers and assign the MAC type and PHY code.
78 * Does not touch the hardware. This function must be called prior to any
79 * other function in the shared code. The ixgbe_hw structure should be
80 * memset to 0 prior to calling this function. The following fields in
81 * hw structure should be filled in prior to calling this function:
82 * hw_addr, back, device_id, vendor_id, subsystem_device_id,
83 * subsystem_vendor_id, and revision_id
84 **/
85s32 ixgbe_init_shared_code(struct ixgbe_hw *hw)
86{
87 s32 status;
88
89 DEBUGFUNC("ixgbe_init_shared_code");
90
91 /*
92 * Set the mac type
93 */
94 ixgbe_set_mac_type(hw);
95
96 switch (hw->mac.type) {
97 case ixgbe_mac_82598EB:
98 status = ixgbe_init_ops_82598(hw);
99 break;
100 case ixgbe_mac_82599EB:
101 status = ixgbe_init_ops_82599(hw);
102 break;
103 case ixgbe_mac_X540:
104 status = ixgbe_init_ops_X540(hw);
105 break;
106 case ixgbe_mac_X550:
107 status = ixgbe_init_ops_X550(hw);
108 break;
109 case ixgbe_mac_X550EM_x:
110 status = ixgbe_init_ops_X550EM_x(hw);
111 break;
112 case ixgbe_mac_X550EM_a:
113 status = ixgbe_init_ops_X550EM_a(hw);
114 break;
115 default:
116 status = IXGBE_ERR_DEVICE_NOT_SUPPORTED;
117 break;
118 }
119 hw->mac.max_link_up_time = IXGBE_LINK_UP_TIME;
120
121 return status;
122}
123
124/**
125 * ixgbe_set_mac_type - Sets MAC type
126 * @hw: pointer to the HW structure
127 *
128 * This function sets the mac type of the adapter based on the
129 * vendor ID and device ID stored in the hw structure.
130 **/
131s32 ixgbe_set_mac_type(struct ixgbe_hw *hw)
132{
133 s32 ret_val = IXGBE_SUCCESS;
134
135 DEBUGFUNC("ixgbe_set_mac_type\n");
136
137 if (hw->vendor_id != IXGBE_INTEL_VENDOR_ID) {
138 ERROR_REPORT2(IXGBE_ERROR_UNSUPPORTED,
139 "Unsupported vendor id: %x", hw->vendor_id);
140 return IXGBE_ERR_DEVICE_NOT_SUPPORTED;
141 }
142
143 hw->mvals = ixgbe_mvals_base;
144
145 switch (hw->device_id) {
146 case IXGBE_DEV_ID_82598:
147 case IXGBE_DEV_ID_82598_BX:
148 case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
149 case IXGBE_DEV_ID_82598AF_DUAL_PORT:
150 case IXGBE_DEV_ID_82598AT:
151 case IXGBE_DEV_ID_82598AT2:
152 case IXGBE_DEV_ID_82598EB_CX4:
153 case IXGBE_DEV_ID_82598_CX4_DUAL_PORT:
154 case IXGBE_DEV_ID_82598_DA_DUAL_PORT:
155 case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM:
156 case IXGBE_DEV_ID_82598EB_XF_LR:
157 case IXGBE_DEV_ID_82598EB_SFP_LOM:
158 hw->mac.type = ixgbe_mac_82598EB;
159 break;
160 case IXGBE_DEV_ID_82599_KX4:
161 case IXGBE_DEV_ID_82599_KX4_MEZZ:
162 case IXGBE_DEV_ID_82599_XAUI_LOM:
163 case IXGBE_DEV_ID_82599_COMBO_BACKPLANE:
164 case IXGBE_DEV_ID_82599_KR:
165 case IXGBE_DEV_ID_82599_SFP:
166 case IXGBE_DEV_ID_82599_BACKPLANE_FCOE:
167 case IXGBE_DEV_ID_82599_SFP_FCOE:
168 case IXGBE_DEV_ID_82599_SFP_EM:
169 case IXGBE_DEV_ID_82599_SFP_SF2:
170 case IXGBE_DEV_ID_82599_SFP_SF_QP:
171 case IXGBE_DEV_ID_82599_QSFP_SF_QP:
172 case IXGBE_DEV_ID_82599EN_SFP:
173 case IXGBE_DEV_ID_82599_CX4:
174 case IXGBE_DEV_ID_82599_BYPASS:
175 case IXGBE_DEV_ID_82599_T3_LOM:
176 hw->mac.type = ixgbe_mac_82599EB;
177 break;
178 case IXGBE_DEV_ID_X540T:
179 case IXGBE_DEV_ID_X540T1:
180 case IXGBE_DEV_ID_X540_BYPASS:
181 hw->mac.type = ixgbe_mac_X540;
182 hw->mvals = ixgbe_mvals_X540;
183 break;
184 case IXGBE_DEV_ID_X550T:
185 case IXGBE_DEV_ID_X550T1:
186 hw->mac.type = ixgbe_mac_X550;
187 hw->mvals = ixgbe_mvals_X550;
188 break;
189 case IXGBE_DEV_ID_X550EM_X_KX4:
190 case IXGBE_DEV_ID_X550EM_X_KR:
191 case IXGBE_DEV_ID_X550EM_X_10G_T:
192 case IXGBE_DEV_ID_X550EM_X_1G_T:
193 case IXGBE_DEV_ID_X550EM_X_SFP:
194 case IXGBE_DEV_ID_X550EM_X_XFI:
195 hw->mac.type = ixgbe_mac_X550EM_x;
196 hw->mvals = ixgbe_mvals_X550EM_x;
197 break;
198 case IXGBE_DEV_ID_X550EM_A_KR:
199 case IXGBE_DEV_ID_X550EM_A_KR_L:
200 case IXGBE_DEV_ID_X550EM_A_SFP_N:
201 case IXGBE_DEV_ID_X550EM_A_SGMII:
202 case IXGBE_DEV_ID_X550EM_A_SGMII_L:
203 case IXGBE_DEV_ID_X550EM_A_1G_T:
204 case IXGBE_DEV_ID_X550EM_A_1G_T_L:
205 case IXGBE_DEV_ID_X550EM_A_10G_T:
206 case IXGBE_DEV_ID_X550EM_A_QSFP:
207 case IXGBE_DEV_ID_X550EM_A_QSFP_N:
208 case IXGBE_DEV_ID_X550EM_A_SFP:
209 hw->mac.type = ixgbe_mac_X550EM_a;
210 hw->mvals = ixgbe_mvals_X550EM_a;
211 break;
212 default:
213 ret_val = IXGBE_ERR_DEVICE_NOT_SUPPORTED;
214 ERROR_REPORT2(IXGBE_ERROR_UNSUPPORTED,
215 "Unsupported device id: %x",
216 hw->device_id);
217 break;
218 }
219
220 DEBUGOUT2("ixgbe_set_mac_type found mac: %d, returns: %d\n",
221 hw->mac.type, ret_val);
222 return ret_val;
223}
224
225/**
226 * ixgbe_init_hw - Initialize the hardware
227 * @hw: pointer to hardware structure
228 *
229 * Initialize the hardware by resetting and then starting the hardware
230 **/
231s32 ixgbe_init_hw(struct ixgbe_hw *hw)
232{
233 return ixgbe_call_func(hw, hw->mac.ops.init_hw, (hw),
234 IXGBE_NOT_IMPLEMENTED);
235}
236
237/**
238 * ixgbe_reset_hw - Performs a hardware reset
239 * @hw: pointer to hardware structure
240 *
241 * Resets the hardware by resetting the transmit and receive units, masks and
242 * clears all interrupts, performs a PHY reset, and performs a MAC reset
243 **/
244s32 ixgbe_reset_hw(struct ixgbe_hw *hw)
245{
246 return ixgbe_call_func(hw, hw->mac.ops.reset_hw, (hw),
247 IXGBE_NOT_IMPLEMENTED);
248}
249
250/**
251 * ixgbe_start_hw - Prepares hardware for Rx/Tx
252 * @hw: pointer to hardware structure
253 *
254 * Starts the hardware by filling the bus info structure and media type,
255 * clears all on chip counters, initializes receive address registers,
256 * multicast table, VLAN filter table, calls routine to setup link and
257 * flow control settings, and leaves transmit and receive units disabled
258 * and uninitialized.
259 **/
260s32 ixgbe_start_hw(struct ixgbe_hw *hw)
261{
262 return ixgbe_call_func(hw, hw->mac.ops.start_hw, (hw),
263 IXGBE_NOT_IMPLEMENTED);
264}
265
266/**
267 * ixgbe_enable_relaxed_ordering - Enables tx relaxed ordering,
268 * which is disabled by default in ixgbe_start_hw();
269 *
270 * @hw: pointer to hardware structure
271 *
272 * Enable relaxed ordering;
273 **/
274void ixgbe_enable_relaxed_ordering(struct ixgbe_hw *hw)
275{
276 if (hw->mac.ops.enable_relaxed_ordering)
277 hw->mac.ops.enable_relaxed_ordering(hw);
278}
279
280/**
281 * ixgbe_clear_hw_cntrs - Clear hardware counters
282 * @hw: pointer to hardware structure
283 *
284 * Clears all hardware statistics counters by reading them from the hardware
285 * Statistics counters are clear on read.
286 **/
287s32 ixgbe_clear_hw_cntrs(struct ixgbe_hw *hw)
288{
289 return ixgbe_call_func(hw, hw->mac.ops.clear_hw_cntrs, (hw),
290 IXGBE_NOT_IMPLEMENTED);
291}
292
293/**
294 * ixgbe_get_media_type - Get media type
295 * @hw: pointer to hardware structure
296 *
297 * Returns the media type (fiber, copper, backplane)
298 **/
299enum ixgbe_media_type ixgbe_get_media_type(struct ixgbe_hw *hw)
300{
301 return ixgbe_call_func(hw, hw->mac.ops.get_media_type, (hw),
302 ixgbe_media_type_unknown);
303}
304
305/**
306 * ixgbe_get_mac_addr - Get MAC address
307 * @hw: pointer to hardware structure
308 * @mac_addr: Adapter MAC address
309 *
310 * Reads the adapter's MAC address from the first Receive Address Register
311 * (RAR0) A reset of the adapter must have been performed prior to calling
312 * this function in order for the MAC address to have been loaded from the
313 * EEPROM into RAR0
314 **/
315s32 ixgbe_get_mac_addr(struct ixgbe_hw *hw, u8 *mac_addr)
316{
317 return ixgbe_call_func(hw, hw->mac.ops.get_mac_addr,
318 (hw, mac_addr), IXGBE_NOT_IMPLEMENTED);
319}
320
321/**
322 * ixgbe_get_san_mac_addr - Get SAN MAC address
323 * @hw: pointer to hardware structure
324 * @san_mac_addr: SAN MAC address
325 *
326 * Reads the SAN MAC address from the EEPROM, if it's available. This is
327 * per-port, so set_lan_id() must be called before reading the addresses.
328 **/
329s32 ixgbe_get_san_mac_addr(struct ixgbe_hw *hw, u8 *san_mac_addr)
330{
331 return ixgbe_call_func(hw, hw->mac.ops.get_san_mac_addr,
332 (hw, san_mac_addr), IXGBE_NOT_IMPLEMENTED);
333}
334
335/**
336 * ixgbe_set_san_mac_addr - Write a SAN MAC address
337 * @hw: pointer to hardware structure
338 * @san_mac_addr: SAN MAC address
339 *
340 * Writes A SAN MAC address to the EEPROM.
341 **/
342s32 ixgbe_set_san_mac_addr(struct ixgbe_hw *hw, u8 *san_mac_addr)
343{
344 return ixgbe_call_func(hw, hw->mac.ops.set_san_mac_addr,
345 (hw, san_mac_addr), IXGBE_NOT_IMPLEMENTED);
346}
347
348/**
349 * ixgbe_get_device_caps - Get additional device capabilities
350 * @hw: pointer to hardware structure
351 * @device_caps: the EEPROM word for device capabilities
352 *
353 * Reads the extra device capabilities from the EEPROM
354 **/
355s32 ixgbe_get_device_caps(struct ixgbe_hw *hw, u16 *device_caps)
356{
357 return ixgbe_call_func(hw, hw->mac.ops.get_device_caps,
358 (hw, device_caps), IXGBE_NOT_IMPLEMENTED);
359}
360
361/**
362 * ixgbe_get_wwn_prefix - Get alternative WWNN/WWPN prefix from the EEPROM
363 * @hw: pointer to hardware structure
364 * @wwnn_prefix: the alternative WWNN prefix
365 * @wwpn_prefix: the alternative WWPN prefix
366 *
367 * This function will read the EEPROM from the alternative SAN MAC address
368 * block to check the support for the alternative WWNN/WWPN prefix support.
369 **/
370s32 ixgbe_get_wwn_prefix(struct ixgbe_hw *hw, u16 *wwnn_prefix,
371 u16 *wwpn_prefix)
372{
373 return ixgbe_call_func(hw, hw->mac.ops.get_wwn_prefix,
374 (hw, wwnn_prefix, wwpn_prefix),
375 IXGBE_NOT_IMPLEMENTED);
376}
377
378/**
379 * ixgbe_get_fcoe_boot_status - Get FCOE boot status from EEPROM
380 * @hw: pointer to hardware structure
381 * @bs: the fcoe boot status
382 *
383 * This function will read the FCOE boot status from the iSCSI FCOE block
384 **/
385s32 ixgbe_get_fcoe_boot_status(struct ixgbe_hw *hw, u16 *bs)
386{
387 return ixgbe_call_func(hw, hw->mac.ops.get_fcoe_boot_status,
388 (hw, bs),
389 IXGBE_NOT_IMPLEMENTED);
390}
391
392/**
393 * ixgbe_get_bus_info - Set PCI bus info
394 * @hw: pointer to hardware structure
395 *
396 * Sets the PCI bus info (speed, width, type) within the ixgbe_hw structure
397 **/
398s32 ixgbe_get_bus_info(struct ixgbe_hw *hw)
399{
400 return ixgbe_call_func(hw, hw->mac.ops.get_bus_info, (hw),
401 IXGBE_NOT_IMPLEMENTED);
402}
403
404/**
405 * ixgbe_get_num_of_tx_queues - Get Tx queues
406 * @hw: pointer to hardware structure
407 *
408 * Returns the number of transmit queues for the given adapter.
409 **/
410u32 ixgbe_get_num_of_tx_queues(struct ixgbe_hw *hw)
411{
412 return hw->mac.max_tx_queues;
413}
414
415/**
416 * ixgbe_get_num_of_rx_queues - Get Rx queues
417 * @hw: pointer to hardware structure
418 *
419 * Returns the number of receive queues for the given adapter.
420 **/
421u32 ixgbe_get_num_of_rx_queues(struct ixgbe_hw *hw)
422{
423 return hw->mac.max_rx_queues;
424}
425
426/**
427 * ixgbe_stop_adapter - Disable Rx/Tx units
428 * @hw: pointer to hardware structure
429 *
430 * Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts,
431 * disables transmit and receive units. The adapter_stopped flag is used by
432 * the shared code and drivers to determine if the adapter is in a stopped
433 * state and should not touch the hardware.
434 **/
435s32 ixgbe_stop_adapter(struct ixgbe_hw *hw)
436{
437 return ixgbe_call_func(hw, hw->mac.ops.stop_adapter, (hw),
438 IXGBE_NOT_IMPLEMENTED);
439}
440
441/**
442 * ixgbe_read_pba_string - Reads part number string from EEPROM
443 * @hw: pointer to hardware structure
444 * @pba_num: stores the part number string from the EEPROM
445 * @pba_num_size: part number string buffer length
446 *
447 * Reads the part number string from the EEPROM.
448 **/
449s32 ixgbe_read_pba_string(struct ixgbe_hw *hw, u8 *pba_num, u32 pba_num_size)
450{
451 return ixgbe_read_pba_string_generic(hw, pba_num, pba_num_size);
452}
453
454/**
455 * ixgbe_read_pba_num - Reads part number from EEPROM
456 * @hw: pointer to hardware structure
457 * @pba_num: stores the part number from the EEPROM
458 *
459 * Reads the part number from the EEPROM.
460 **/
461s32 ixgbe_read_pba_num(struct ixgbe_hw *hw, u32 *pba_num)
462{
463 return ixgbe_read_pba_num_generic(hw, pba_num);
464}
465
466/**
467 * ixgbe_identify_phy - Get PHY type
468 * @hw: pointer to hardware structure
469 *
470 * Determines the physical layer module found on the current adapter.
471 **/
472s32 ixgbe_identify_phy(struct ixgbe_hw *hw)
473{
474 s32 status = IXGBE_SUCCESS;
475
476 if (hw->phy.type == ixgbe_phy_unknown) {
477 status = ixgbe_call_func(hw, hw->phy.ops.identify, (hw),
478 IXGBE_NOT_IMPLEMENTED);
479 }
480
481 return status;
482}
483
484/**
485 * ixgbe_reset_phy - Perform a PHY reset
486 * @hw: pointer to hardware structure
487 **/
488s32 ixgbe_reset_phy(struct ixgbe_hw *hw)
489{
490 s32 status = IXGBE_SUCCESS;
491
492 if (hw->phy.type == ixgbe_phy_unknown) {
493 if (ixgbe_identify_phy(hw) != IXGBE_SUCCESS)
494 status = IXGBE_ERR_PHY;
495 }
496
497 if (status == IXGBE_SUCCESS) {
498 status = ixgbe_call_func(hw, hw->phy.ops.reset, (hw),
499 IXGBE_NOT_IMPLEMENTED);
500 }
501 return status;
502}
503
504/**
505 * ixgbe_get_phy_firmware_version -
506 * @hw: pointer to hardware structure
507 * @firmware_version: pointer to firmware version
508 **/
509s32 ixgbe_get_phy_firmware_version(struct ixgbe_hw *hw, u16 *firmware_version)
510{
511 s32 status = IXGBE_SUCCESS;
512
513 status = ixgbe_call_func(hw, hw->phy.ops.get_firmware_version,
514 (hw, firmware_version),
515 IXGBE_NOT_IMPLEMENTED);
516 return status;
517}
518
519/**
520 * ixgbe_read_phy_reg - Read PHY register
521 * @hw: pointer to hardware structure
522 * @reg_addr: 32 bit address of PHY register to read
523 * @phy_data: Pointer to read data from PHY register
524 *
525 * Reads a value from a specified PHY register
526 **/
527s32 ixgbe_read_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
528 u16 *phy_data)
529{
530 if (hw->phy.id == 0)
531 ixgbe_identify_phy(hw);
532
533 return ixgbe_call_func(hw, hw->phy.ops.read_reg, (hw, reg_addr,
534 device_type, phy_data), IXGBE_NOT_IMPLEMENTED);
535}
536
537/**
538 * ixgbe_write_phy_reg - Write PHY register
539 * @hw: pointer to hardware structure
540 * @reg_addr: 32 bit PHY register to write
541 * @phy_data: Data to write to the PHY register
542 *
543 * Writes a value to specified PHY register
544 **/
545s32 ixgbe_write_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
546 u16 phy_data)
547{
548 if (hw->phy.id == 0)
549 ixgbe_identify_phy(hw);
550
551 return ixgbe_call_func(hw, hw->phy.ops.write_reg, (hw, reg_addr,
552 device_type, phy_data), IXGBE_NOT_IMPLEMENTED);
553}
554
555/**
556 * ixgbe_setup_phy_link - Restart PHY autoneg
557 * @hw: pointer to hardware structure
558 *
559 * Restart autonegotiation and PHY and waits for completion.
560 **/
561s32 ixgbe_setup_phy_link(struct ixgbe_hw *hw)
562{
563 return ixgbe_call_func(hw, hw->phy.ops.setup_link, (hw),
564 IXGBE_NOT_IMPLEMENTED);
565}
566
567/**
568 * ixgbe_setup_internal_phy - Configure integrated PHY
569 * @hw: pointer to hardware structure
570 *
571 * Reconfigure the integrated PHY in order to enable talk to the external PHY.
572 * Returns success if not implemented, since nothing needs to be done in this
573 * case.
574 */
575s32 ixgbe_setup_internal_phy(struct ixgbe_hw *hw)
576{
577 return ixgbe_call_func(hw, hw->phy.ops.setup_internal_link, (hw),
578 IXGBE_SUCCESS);
579}
580
581/**
582 * ixgbe_check_phy_link - Determine link and speed status
583 * @hw: pointer to hardware structure
584 *
585 * Reads a PHY register to determine if link is up and the current speed for
586 * the PHY.
587 **/
588s32 ixgbe_check_phy_link(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
589 bool *link_up)
590{
591 return ixgbe_call_func(hw, hw->phy.ops.check_link, (hw, speed,
592 link_up), IXGBE_NOT_IMPLEMENTED);
593}
594
595/**
596 * ixgbe_setup_phy_link_speed - Set auto advertise
597 * @hw: pointer to hardware structure
598 * @speed: new link speed
599 *
600 * Sets the auto advertised capabilities
601 **/
602s32 ixgbe_setup_phy_link_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed,
603 bool autoneg_wait_to_complete)
604{
605 return ixgbe_call_func(hw, hw->phy.ops.setup_link_speed, (hw, speed,
606 autoneg_wait_to_complete),
607 IXGBE_NOT_IMPLEMENTED);
608}
609
610/**
611 * ixgbe_set_phy_power - Control the phy power state
612 * @hw: pointer to hardware structure
613 * @on: TRUE for on, FALSE for off
614 */
615s32 ixgbe_set_phy_power(struct ixgbe_hw *hw, bool on)
616{
617 return ixgbe_call_func(hw, hw->phy.ops.set_phy_power, (hw, on),
618 IXGBE_NOT_IMPLEMENTED);
619}
620
621/**
622 * ixgbe_check_link - Get link and speed status
623 * @hw: pointer to hardware structure
624 *
625 * Reads the links register to determine if link is up and the current speed
626 **/
627s32 ixgbe_check_link(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
628 bool *link_up, bool link_up_wait_to_complete)
629{
630 return ixgbe_call_func(hw, hw->mac.ops.check_link, (hw, speed,
631 link_up, link_up_wait_to_complete),
632 IXGBE_NOT_IMPLEMENTED);
633}
634
635/**
636 * ixgbe_disable_tx_laser - Disable Tx laser
637 * @hw: pointer to hardware structure
638 *
639 * If the driver needs to disable the laser on SFI optics.
640 **/
641void ixgbe_disable_tx_laser(struct ixgbe_hw *hw)
642{
643 if (hw->mac.ops.disable_tx_laser)
644 hw->mac.ops.disable_tx_laser(hw);
645}
646
647/**
648 * ixgbe_enable_tx_laser - Enable Tx laser
649 * @hw: pointer to hardware structure
650 *
651 * If the driver needs to enable the laser on SFI optics.
652 **/
653void ixgbe_enable_tx_laser(struct ixgbe_hw *hw)
654{
655 if (hw->mac.ops.enable_tx_laser)
656 hw->mac.ops.enable_tx_laser(hw);
657}
658
659/**
660 * ixgbe_flap_tx_laser - flap Tx laser to start autotry process
661 * @hw: pointer to hardware structure
662 *
663 * When the driver changes the link speeds that it can support then
664 * flap the tx laser to alert the link partner to start autotry
665 * process on its end.
666 **/
667void ixgbe_flap_tx_laser(struct ixgbe_hw *hw)
668{
669 if (hw->mac.ops.flap_tx_laser)
670 hw->mac.ops.flap_tx_laser(hw);
671}
672
673/**
674 * ixgbe_setup_link - Set link speed
675 * @hw: pointer to hardware structure
676 * @speed: new link speed
677 *
678 * Configures link settings. Restarts the link.
679 * Performs autonegotiation if needed.
680 **/
681s32 ixgbe_setup_link(struct ixgbe_hw *hw, ixgbe_link_speed speed,
682 bool autoneg_wait_to_complete)
683{
684 return ixgbe_call_func(hw, hw->mac.ops.setup_link, (hw, speed,
685 autoneg_wait_to_complete),
686 IXGBE_NOT_IMPLEMENTED);
687}
688
689/**
690 * ixgbe_setup_mac_link - Set link speed
691 * @hw: pointer to hardware structure
692 * @speed: new link speed
693 *
694 * Configures link settings. Restarts the link.
695 * Performs autonegotiation if needed.
696 **/
697s32 ixgbe_setup_mac_link(struct ixgbe_hw *hw, ixgbe_link_speed speed,
698 bool autoneg_wait_to_complete)
699{
700 return ixgbe_call_func(hw, hw->mac.ops.setup_mac_link, (hw, speed,
701 autoneg_wait_to_complete),
702 IXGBE_NOT_IMPLEMENTED);
703}
704
705/**
706 * ixgbe_get_link_capabilities - Returns link capabilities
707 * @hw: pointer to hardware structure
708 *
709 * Determines the link capabilities of the current configuration.
710 **/
711s32 ixgbe_get_link_capabilities(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
712 bool *autoneg)
713{
714 return ixgbe_call_func(hw, hw->mac.ops.get_link_capabilities, (hw,
715 speed, autoneg), IXGBE_NOT_IMPLEMENTED);
716}
717
718/**
719 * ixgbe_led_on - Turn on LEDs
720 * @hw: pointer to hardware structure
721 * @index: led number to turn on
722 *
723 * Turns on the software controllable LEDs.
724 **/
725s32 ixgbe_led_on(struct ixgbe_hw *hw, u32 index)
726{
727 return ixgbe_call_func(hw, hw->mac.ops.led_on, (hw, index),
728 IXGBE_NOT_IMPLEMENTED);
729}
730
731/**
732 * ixgbe_led_off - Turn off LEDs
733 * @hw: pointer to hardware structure
734 * @index: led number to turn off
735 *
736 * Turns off the software controllable LEDs.
737 **/
738s32 ixgbe_led_off(struct ixgbe_hw *hw, u32 index)
739{
740 return ixgbe_call_func(hw, hw->mac.ops.led_off, (hw, index),
741 IXGBE_NOT_IMPLEMENTED);
742}
743
744/**
745 * ixgbe_blink_led_start - Blink LEDs
746 * @hw: pointer to hardware structure
747 * @index: led number to blink
748 *
749 * Blink LED based on index.
750 **/
751s32 ixgbe_blink_led_start(struct ixgbe_hw *hw, u32 index)
752{
753 return ixgbe_call_func(hw, hw->mac.ops.blink_led_start, (hw, index),
754 IXGBE_NOT_IMPLEMENTED);
755}
756
757/**
758 * ixgbe_blink_led_stop - Stop blinking LEDs
759 * @hw: pointer to hardware structure
760 *
761 * Stop blinking LED based on index.
762 **/
763s32 ixgbe_blink_led_stop(struct ixgbe_hw *hw, u32 index)
764{
765 return ixgbe_call_func(hw, hw->mac.ops.blink_led_stop, (hw, index),
766 IXGBE_NOT_IMPLEMENTED);
767}
768
769/**
770 * ixgbe_init_eeprom_params - Initialize EEPROM parameters
771 * @hw: pointer to hardware structure
772 *
773 * Initializes the EEPROM parameters ixgbe_eeprom_info within the
774 * ixgbe_hw struct in order to set up EEPROM access.
775 **/
776s32 ixgbe_init_eeprom_params(struct ixgbe_hw *hw)
777{
778 return ixgbe_call_func(hw, hw->eeprom.ops.init_params, (hw),
779 IXGBE_NOT_IMPLEMENTED);
780}
781
782
783/**
784 * ixgbe_write_eeprom - Write word to EEPROM
785 * @hw: pointer to hardware structure
786 * @offset: offset within the EEPROM to be written to
787 * @data: 16 bit word to be written to the EEPROM
788 *
789 * Writes 16 bit value to EEPROM. If ixgbe_eeprom_update_checksum is not
790 * called after this function, the EEPROM will most likely contain an
791 * invalid checksum.
792 **/
793s32 ixgbe_write_eeprom(struct ixgbe_hw *hw, u16 offset, u16 data)
794{
795 return ixgbe_call_func(hw, hw->eeprom.ops.write, (hw, offset, data),
796 IXGBE_NOT_IMPLEMENTED);
797}
798
799/**
800 * ixgbe_write_eeprom_buffer - Write word(s) to EEPROM
801 * @hw: pointer to hardware structure
802 * @offset: offset within the EEPROM to be written to
803 * @data: 16 bit word(s) to be written to the EEPROM
804 * @words: number of words
805 *
806 * Writes 16 bit word(s) to EEPROM. If ixgbe_eeprom_update_checksum is not
807 * called after this function, the EEPROM will most likely contain an
808 * invalid checksum.
809 **/
810s32 ixgbe_write_eeprom_buffer(struct ixgbe_hw *hw, u16 offset, u16 words,
811 u16 *data)
812{
813 return ixgbe_call_func(hw, hw->eeprom.ops.write_buffer,
814 (hw, offset, words, data),
815 IXGBE_NOT_IMPLEMENTED);
816}
817
818/**
819 * ixgbe_read_eeprom - Read word from EEPROM
820 * @hw: pointer to hardware structure
821 * @offset: offset within the EEPROM to be read
822 * @data: read 16 bit value from EEPROM
823 *
824 * Reads 16 bit value from EEPROM
825 **/
826s32 ixgbe_read_eeprom(struct ixgbe_hw *hw, u16 offset, u16 *data)
827{
828 return ixgbe_call_func(hw, hw->eeprom.ops.read, (hw, offset, data),
829 IXGBE_NOT_IMPLEMENTED);
830}
831
832/**
833 * ixgbe_read_eeprom_buffer - Read word(s) from EEPROM
834 * @hw: pointer to hardware structure
835 * @offset: offset within the EEPROM to be read
836 * @data: read 16 bit word(s) from EEPROM
837 * @words: number of words
838 *
839 * Reads 16 bit word(s) from EEPROM
840 **/
841s32 ixgbe_read_eeprom_buffer(struct ixgbe_hw *hw, u16 offset,
842 u16 words, u16 *data)
843{
844 return ixgbe_call_func(hw, hw->eeprom.ops.read_buffer,
845 (hw, offset, words, data),
846 IXGBE_NOT_IMPLEMENTED);
847}
848
849/**
850 * ixgbe_validate_eeprom_checksum - Validate EEPROM checksum
851 * @hw: pointer to hardware structure
852 * @checksum_val: calculated checksum
853 *
854 * Performs checksum calculation and validates the EEPROM checksum
855 **/
856s32 ixgbe_validate_eeprom_checksum(struct ixgbe_hw *hw, u16 *checksum_val)
857{
858 return ixgbe_call_func(hw, hw->eeprom.ops.validate_checksum,
859 (hw, checksum_val), IXGBE_NOT_IMPLEMENTED);
860}
861
862/**
863 * ixgbe_eeprom_update_checksum - Updates the EEPROM checksum
864 * @hw: pointer to hardware structure
865 **/
866s32 ixgbe_update_eeprom_checksum(struct ixgbe_hw *hw)
867{
868 return ixgbe_call_func(hw, hw->eeprom.ops.update_checksum, (hw),
869 IXGBE_NOT_IMPLEMENTED);
870}
871
872/**
873 * ixgbe_insert_mac_addr - Find a RAR for this mac address
874 * @hw: pointer to hardware structure
875 * @addr: Address to put into receive address register
876 * @vmdq: VMDq pool to assign
877 *
878 * Puts an ethernet address into a receive address register, or
879 * finds the rar that it is already in; adds to the pool list
880 **/
881s32 ixgbe_insert_mac_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq)
882{
883 return ixgbe_call_func(hw, hw->mac.ops.insert_mac_addr,
884 (hw, addr, vmdq),
885 IXGBE_NOT_IMPLEMENTED);
886}
887
888/**
889 * ixgbe_set_rar - Set Rx address register
890 * @hw: pointer to hardware structure
891 * @index: Receive address register to write
892 * @addr: Address to put into receive address register
893 * @vmdq: VMDq "set"
894 * @enable_addr: set flag that address is active
895 *
896 * Puts an ethernet address into a receive address register.
897 **/
898s32 ixgbe_set_rar(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
899 u32 enable_addr)
900{
901 return ixgbe_call_func(hw, hw->mac.ops.set_rar, (hw, index, addr, vmdq,
902 enable_addr), IXGBE_NOT_IMPLEMENTED);
903}
904
905/**
906 * ixgbe_clear_rar - Clear Rx address register
907 * @hw: pointer to hardware structure
908 * @index: Receive address register to write
909 *
910 * Puts an ethernet address into a receive address register.
911 **/
912s32 ixgbe_clear_rar(struct ixgbe_hw *hw, u32 index)
913{
914 return ixgbe_call_func(hw, hw->mac.ops.clear_rar, (hw, index),
915 IXGBE_NOT_IMPLEMENTED);
916}
917
918/**
919 * ixgbe_set_vmdq - Associate a VMDq index with a receive address
920 * @hw: pointer to hardware structure
921 * @rar: receive address register index to associate with VMDq index
922 * @vmdq: VMDq set or pool index
923 **/
924s32 ixgbe_set_vmdq(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
925{
926 return ixgbe_call_func(hw, hw->mac.ops.set_vmdq, (hw, rar, vmdq),
927 IXGBE_NOT_IMPLEMENTED);
928
929}
930
931/**
932 * ixgbe_set_vmdq_san_mac - Associate VMDq index 127 with a receive address
933 * @hw: pointer to hardware structure
934 * @vmdq: VMDq default pool index
935 **/
936s32 ixgbe_set_vmdq_san_mac(struct ixgbe_hw *hw, u32 vmdq)
937{
938 return ixgbe_call_func(hw, hw->mac.ops.set_vmdq_san_mac,
939 (hw, vmdq), IXGBE_NOT_IMPLEMENTED);
940}
941
942/**
943 * ixgbe_clear_vmdq - Disassociate a VMDq index from a receive address
944 * @hw: pointer to hardware structure
945 * @rar: receive address register index to disassociate with VMDq index
946 * @vmdq: VMDq set or pool index
947 **/
948s32 ixgbe_clear_vmdq(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
949{
950 return ixgbe_call_func(hw, hw->mac.ops.clear_vmdq, (hw, rar, vmdq),
951 IXGBE_NOT_IMPLEMENTED);
952}
953
954/**
955 * ixgbe_init_rx_addrs - Initializes receive address filters.
956 * @hw: pointer to hardware structure
957 *
958 * Places the MAC address in receive address register 0 and clears the rest
959 * of the receive address registers. Clears the multicast table. Assumes
960 * the receiver is in reset when the routine is called.
961 **/
962s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw)
963{
964 return ixgbe_call_func(hw, hw->mac.ops.init_rx_addrs, (hw),
965 IXGBE_NOT_IMPLEMENTED);
966}
967
968/**
969 * ixgbe_get_num_rx_addrs - Returns the number of RAR entries.
970 * @hw: pointer to hardware structure
971 **/
972u32 ixgbe_get_num_rx_addrs(struct ixgbe_hw *hw)
973{
974 return hw->mac.num_rar_entries;
975}
976
977/**
978 * ixgbe_update_uc_addr_list - Updates the MAC's list of secondary addresses
979 * @hw: pointer to hardware structure
980 * @addr_list: the list of new multicast addresses
981 * @addr_count: number of addresses
982 * @func: iterator function to walk the multicast address list
983 *
984 * The given list replaces any existing list. Clears the secondary addrs from
985 * receive address registers. Uses unused receive address registers for the
986 * first secondary addresses, and falls back to promiscuous mode as needed.
987 **/
988s32 ixgbe_update_uc_addr_list(struct ixgbe_hw *hw, u8 *addr_list,
989 u32 addr_count, ixgbe_mc_addr_itr func)
990{
991 return ixgbe_call_func(hw, hw->mac.ops.update_uc_addr_list, (hw,
992 addr_list, addr_count, func),
993 IXGBE_NOT_IMPLEMENTED);
994}
995
996/**
997 * ixgbe_update_mc_addr_list - Updates the MAC's list of multicast addresses
998 * @hw: pointer to hardware structure
999 * @mc_addr_list: the list of new multicast addresses
1000 * @mc_addr_count: number of addresses
1001 * @func: iterator function to walk the multicast address list
1002 *
1003 * The given list replaces any existing list. Clears the MC addrs from receive
1004 * address registers and the multicast table. Uses unused receive address
1005 * registers for the first multicast addresses, and hashes the rest into the
1006 * multicast table.
1007 **/
1008s32 ixgbe_update_mc_addr_list(struct ixgbe_hw *hw, u8 *mc_addr_list,
1009 u32 mc_addr_count, ixgbe_mc_addr_itr func,
1010 bool clear)
1011{
1012 return ixgbe_call_func(hw, hw->mac.ops.update_mc_addr_list, (hw,
1013 mc_addr_list, mc_addr_count, func, clear),
1014 IXGBE_NOT_IMPLEMENTED);
1015}
1016
1017/**
1018 * ixgbe_enable_mc - Enable multicast address in RAR
1019 * @hw: pointer to hardware structure
1020 *
1021 * Enables multicast address in RAR and the use of the multicast hash table.
1022 **/
1023s32 ixgbe_enable_mc(struct ixgbe_hw *hw)
1024{
1025 return ixgbe_call_func(hw, hw->mac.ops.enable_mc, (hw),
1026 IXGBE_NOT_IMPLEMENTED);
1027}
1028
1029/**
1030 * ixgbe_disable_mc - Disable multicast address in RAR
1031 * @hw: pointer to hardware structure
1032 *
1033 * Disables multicast address in RAR and the use of the multicast hash table.
1034 **/
1035s32 ixgbe_disable_mc(struct ixgbe_hw *hw)
1036{
1037 return ixgbe_call_func(hw, hw->mac.ops.disable_mc, (hw),
1038 IXGBE_NOT_IMPLEMENTED);
1039}
1040
1041/**
1042 * ixgbe_clear_vfta - Clear VLAN filter table
1043 * @hw: pointer to hardware structure
1044 *
1045 * Clears the VLAN filer table, and the VMDq index associated with the filter
1046 **/
1047s32 ixgbe_clear_vfta(struct ixgbe_hw *hw)
1048{
1049 return ixgbe_call_func(hw, hw->mac.ops.clear_vfta, (hw),
1050 IXGBE_NOT_IMPLEMENTED);
1051}
1052
1053/**
1054 * ixgbe_set_vfta - Set VLAN filter table
1055 * @hw: pointer to hardware structure
1056 * @vlan: VLAN id to write to VLAN filter
1057 * @vind: VMDq output index that maps queue to VLAN id in VLVFB
1058 * @vlan_on: boolean flag to turn on/off VLAN
1059 * @vlvf_bypass: boolean flag indicating updating the default pool is okay
1060 *
1061 * Turn on/off specified VLAN in the VLAN filter table.
1062 **/
1063s32 ixgbe_set_vfta(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on,
1064 bool vlvf_bypass)
1065{
1066 return ixgbe_call_func(hw, hw->mac.ops.set_vfta, (hw, vlan, vind,
1067 vlan_on, vlvf_bypass), IXGBE_NOT_IMPLEMENTED);
1068}
1069
1070/**
1071 * ixgbe_set_vlvf - Set VLAN Pool Filter
1072 * @hw: pointer to hardware structure
1073 * @vlan: VLAN id to write to VLAN filter
1074 * @vind: VMDq output index that maps queue to VLAN id in VLVFB
1075 * @vlan_on: boolean flag to turn on/off VLAN in VLVF
1076 * @vfta_delta: pointer to the difference between the current value of VFTA
1077 * and the desired value
1078 * @vfta: the desired value of the VFTA
1079 * @vlvf_bypass: boolean flag indicating updating the default pool is okay
1080 *
1081 * Turn on/off specified bit in VLVF table.
1082 **/
1083s32 ixgbe_set_vlvf(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on,
1084 u32 *vfta_delta, u32 vfta, bool vlvf_bypass)
1085{
1086 return ixgbe_call_func(hw, hw->mac.ops.set_vlvf, (hw, vlan, vind,
1087 vlan_on, vfta_delta, vfta, vlvf_bypass),
1088 IXGBE_NOT_IMPLEMENTED);
1089}
1090
1091/**
1092 * ixgbe_fc_enable - Enable flow control
1093 * @hw: pointer to hardware structure
1094 *
1095 * Configures the flow control settings based on SW configuration.
1096 **/
1097s32 ixgbe_fc_enable(struct ixgbe_hw *hw)
1098{
1099 return ixgbe_call_func(hw, hw->mac.ops.fc_enable, (hw),
1100 IXGBE_NOT_IMPLEMENTED);
1101}
1102
1103/**
1104 * ixgbe_setup_fc - Set up flow control
1105 * @hw: pointer to hardware structure
1106 *
1107 * Called at init time to set up flow control.
1108 **/
1109s32 ixgbe_setup_fc(struct ixgbe_hw *hw)
1110{
1111 return ixgbe_call_func(hw, hw->mac.ops.setup_fc, (hw),
1112 IXGBE_NOT_IMPLEMENTED);
1113}
1114
1115/**
1116 * ixgbe_set_fw_drv_ver - Try to send the driver version number FW
1117 * @hw: pointer to hardware structure
1118 * @maj: driver major number to be sent to firmware
1119 * @min: driver minor number to be sent to firmware
1120 * @build: driver build number to be sent to firmware
1121 * @ver: driver version number to be sent to firmware
1122 * @len: length of driver_ver string
1123 * @driver_ver: driver string
1124 **/
1125s32 ixgbe_set_fw_drv_ver(struct ixgbe_hw *hw, u8 maj, u8 min, u8 build,
1126 u8 ver, u16 len, char *driver_ver)
1127{
1128 return ixgbe_call_func(hw, hw->mac.ops.set_fw_drv_ver, (hw, maj, min,
1129 build, ver, len, driver_ver),
1130 IXGBE_NOT_IMPLEMENTED);
1131}
1132
1133
1134
1135/**
1136 * ixgbe_dmac_config - Configure DMA Coalescing registers.
1137 * @hw: pointer to hardware structure
1138 *
1139 * Configure DMA coalescing. If enabling dmac, dmac is activated.
1140 * When disabling dmac, dmac enable dmac bit is cleared.
1141 **/
1142s32 ixgbe_dmac_config(struct ixgbe_hw *hw)
1143{
1144 return ixgbe_call_func(hw, hw->mac.ops.dmac_config, (hw),
1145 IXGBE_NOT_IMPLEMENTED);
1146}
1147
1148/**
1149 * ixgbe_dmac_update_tcs - Configure DMA Coalescing registers.
1150 * @hw: pointer to hardware structure
1151 *
1152 * Disables dmac, updates per TC settings, and then enable dmac.
1153 **/
1154s32 ixgbe_dmac_update_tcs(struct ixgbe_hw *hw)
1155{
1156 return ixgbe_call_func(hw, hw->mac.ops.dmac_update_tcs, (hw),
1157 IXGBE_NOT_IMPLEMENTED);
1158}
1159
1160/**
1161 * ixgbe_dmac_config_tcs - Configure DMA Coalescing registers.
1162 * @hw: pointer to hardware structure
1163 *
1164 * Configure DMA coalescing threshold per TC and set high priority bit for
1165 * FCOE TC. The dmac enable bit must be cleared before configuring.
1166 **/
1167s32 ixgbe_dmac_config_tcs(struct ixgbe_hw *hw)
1168{
1169 return ixgbe_call_func(hw, hw->mac.ops.dmac_config_tcs, (hw),
1170 IXGBE_NOT_IMPLEMENTED);
1171}
1172
1173/**
1174 * ixgbe_setup_eee - Enable/disable EEE support
1175 * @hw: pointer to the HW structure
1176 * @enable_eee: boolean flag to enable EEE
1177 *
1178 * Enable/disable EEE based on enable_ee flag.
1179 * Auto-negotiation must be started after BASE-T EEE bits in PHY register 7.3C
1180 * are modified.
1181 *
1182 **/
1183s32 ixgbe_setup_eee(struct ixgbe_hw *hw, bool enable_eee)
1184{
1185 return ixgbe_call_func(hw, hw->mac.ops.setup_eee, (hw, enable_eee),
1186 IXGBE_NOT_IMPLEMENTED);
1187}
1188
1189/**
1190 * ixgbe_set_source_address_pruning - Enable/Disable source address pruning
1191 * @hw: pointer to hardware structure
1192 * @enbale: enable or disable source address pruning
1193 * @pool: Rx pool - Rx pool to toggle source address pruning
1194 **/
1195void ixgbe_set_source_address_pruning(struct ixgbe_hw *hw, bool enable,
1196 unsigned int pool)
1197{
1198 if (hw->mac.ops.set_source_address_pruning)
1199 hw->mac.ops.set_source_address_pruning(hw, enable, pool);
1200}
1201
1202/**
1203 * ixgbe_set_ethertype_anti_spoofing - Enable/Disable Ethertype anti-spoofing
1204 * @hw: pointer to hardware structure
1205 * @enable: enable or disable switch for Ethertype anti-spoofing
1206 * @vf: Virtual Function pool - VF Pool to set for Ethertype anti-spoofing
1207 *
1208 **/
1209void ixgbe_set_ethertype_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf)
1210{
1211 if (hw->mac.ops.set_ethertype_anti_spoofing)
1212 hw->mac.ops.set_ethertype_anti_spoofing(hw, enable, vf);
1213}
1214
1215/**
1216 * ixgbe_read_iosf_sb_reg - Read 32 bit PHY register
1217 * @hw: pointer to hardware structure
1218 * @reg_addr: 32 bit address of PHY register to read
1219 * @device_type: type of device you want to communicate with
1220 * @phy_data: Pointer to read data from PHY register
1221 *
1222 * Reads a value from a specified PHY register
1223 **/
1224s32 ixgbe_read_iosf_sb_reg(struct ixgbe_hw *hw, u32 reg_addr,
1225 u32 device_type, u32 *phy_data)
1226{
1227 return ixgbe_call_func(hw, hw->mac.ops.read_iosf_sb_reg, (hw, reg_addr,
1228 device_type, phy_data), IXGBE_NOT_IMPLEMENTED);
1229}
1230
1231/**
1232 * ixgbe_write_iosf_sb_reg - Write 32 bit register through IOSF Sideband
1233 * @hw: pointer to hardware structure
1234 * @reg_addr: 32 bit PHY register to write
1235 * @device_type: type of device you want to communicate with
1236 * @phy_data: Data to write to the PHY register
1237 *
1238 * Writes a value to specified PHY register
1239 **/
1240s32 ixgbe_write_iosf_sb_reg(struct ixgbe_hw *hw, u32 reg_addr,
1241 u32 device_type, u32 phy_data)
1242{
1243 return ixgbe_call_func(hw, hw->mac.ops.write_iosf_sb_reg, (hw, reg_addr,
1244 device_type, phy_data), IXGBE_NOT_IMPLEMENTED);
1245}
1246
1247/**
1248 * ixgbe_disable_mdd - Disable malicious driver detection
1249 * @hw: pointer to hardware structure
1250 *
1251 **/
1252void ixgbe_disable_mdd(struct ixgbe_hw *hw)
1253{
1254 if (hw->mac.ops.disable_mdd)
1255 hw->mac.ops.disable_mdd(hw);
1256}
1257
1258/**
1259 * ixgbe_enable_mdd - Enable malicious driver detection
1260 * @hw: pointer to hardware structure
1261 *
1262 **/
1263void ixgbe_enable_mdd(struct ixgbe_hw *hw)
1264{
1265 if (hw->mac.ops.enable_mdd)
1266 hw->mac.ops.enable_mdd(hw);
1267}
1268
1269/**
1270 * ixgbe_mdd_event - Handle malicious driver detection event
1271 * @hw: pointer to hardware structure
1272 * @vf_bitmap: vf bitmap of malicious vfs
1273 *
1274 **/
1275void ixgbe_mdd_event(struct ixgbe_hw *hw, u32 *vf_bitmap)
1276{
1277 if (hw->mac.ops.mdd_event)
1278 hw->mac.ops.mdd_event(hw, vf_bitmap);
1279}
1280
1281/**
1282 * ixgbe_restore_mdd_vf - Restore VF that was disabled during malicious driver
1283 * detection event
1284 * @hw: pointer to hardware structure
1285 * @vf: vf index
1286 *
1287 **/
1288void ixgbe_restore_mdd_vf(struct ixgbe_hw *hw, u32 vf)
1289{
1290 if (hw->mac.ops.restore_mdd_vf)
1291 hw->mac.ops.restore_mdd_vf(hw, vf);
1292}
1293
1294/**
1295 * ixgbe_enter_lplu - Transition to low power states
1296 * @hw: pointer to hardware structure
1297 *
1298 * Configures Low Power Link Up on transition to low power states
1299 * (from D0 to non-D0).
1300 **/
1301s32 ixgbe_enter_lplu(struct ixgbe_hw *hw)
1302{
1303 return ixgbe_call_func(hw, hw->phy.ops.enter_lplu, (hw),
1304 IXGBE_NOT_IMPLEMENTED);
1305}
1306
1307/**
1308 * ixgbe_handle_lasi - Handle external Base T PHY interrupt
1309 * @hw: pointer to hardware structure
1310 *
1311 * Handle external Base T PHY interrupt. If high temperature
1312 * failure alarm then return error, else if link status change
1313 * then setup internal/external PHY link
1314 *
1315 * Return IXGBE_ERR_OVERTEMP if interrupt is high temperature
1316 * failure alarm, else return PHY access status.
1317 */
1318s32 ixgbe_handle_lasi(struct ixgbe_hw *hw)
1319{
1320 return ixgbe_call_func(hw, hw->phy.ops.handle_lasi, (hw),
1321 IXGBE_NOT_IMPLEMENTED);
1322}
1323
1324/**
1325 * ixgbe_bypass_rw - Bit bang data into by_pass FW
1326 * @hw: pointer to hardware structure
1327 * @cmd: Command we send to the FW
1328 * @status: The reply from the FW
1329 *
1330 * Bit-bangs the cmd to the by_pass FW status points to what is returned.
1331 **/
1332s32 ixgbe_bypass_rw(struct ixgbe_hw *hw, u32 cmd, u32 *status)
1333{
1334 return ixgbe_call_func(hw, hw->mac.ops.bypass_rw, (hw, cmd, status),
1335 IXGBE_NOT_IMPLEMENTED);
1336}
1337
1338/**
1339 * ixgbe_bypass_valid_rd - Verify valid return from bit-bang.
1340 *
1341 * If we send a write we can't be sure it took until we can read back
1342 * that same register. It can be a problem as some of the feilds may
1343 * for valid reasons change inbetween the time wrote the register and
1344 * we read it again to verify. So this function check everything we
1345 * can check and then assumes it worked.
1346 *
1347 * @u32 in_reg - The register cmd for the bit-bang read.
1348 * @u32 out_reg - The register returned from a bit-bang read.
1349 **/
1350bool ixgbe_bypass_valid_rd(struct ixgbe_hw *hw, u32 in_reg, u32 out_reg)
1351{
1352 return ixgbe_call_func(hw, hw->mac.ops.bypass_valid_rd,
1353 (in_reg, out_reg), IXGBE_NOT_IMPLEMENTED);
1354}
1355
1356/**
1357 * ixgbe_bypass_set - Set a bypass field in the FW CTRL Regiter.
1358 * @hw: pointer to hardware structure
1359 * @cmd: The control word we are setting.
1360 * @event: The event we are setting in the FW. This also happens to
1361 * be the mask for the event we are setting (handy)
1362 * @action: The action we set the event to in the FW. This is in a
1363 * bit field that happens to be what we want to put in
1364 * the event spot (also handy)
1365 *
1366 * Writes to the cmd control the bits in actions.
1367 **/
1368s32 ixgbe_bypass_set(struct ixgbe_hw *hw, u32 cmd, u32 event, u32 action)
1369{
1370 return ixgbe_call_func(hw, hw->mac.ops.bypass_set,
1371 (hw, cmd, event, action),
1372 IXGBE_NOT_IMPLEMENTED);
1373}
1374
1375/**
1376 * ixgbe_bypass_rd_eep - Read the bypass FW eeprom address
1377 * @hw: pointer to hardware structure
1378 * @addr: The bypass eeprom address to read.
1379 * @value: The 8b of data at the address above.
1380 **/
1381s32 ixgbe_bypass_rd_eep(struct ixgbe_hw *hw, u32 addr, u8 *value)
1382{
1383 return ixgbe_call_func(hw, hw->mac.ops.bypass_rd_eep,
1384 (hw, addr, value), IXGBE_NOT_IMPLEMENTED);
1385}
1386
1387/**
1388 * ixgbe_read_analog_reg8 - Reads 8 bit analog register
1389 * @hw: pointer to hardware structure
1390 * @reg: analog register to read
1391 * @val: read value
1392 *
1393 * Performs write operation to analog register specified.
1394 **/
1395s32 ixgbe_read_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 *val)
1396{
1397 return ixgbe_call_func(hw, hw->mac.ops.read_analog_reg8, (hw, reg,
1398 val), IXGBE_NOT_IMPLEMENTED);
1399}
1400
1401/**
1402 * ixgbe_write_analog_reg8 - Writes 8 bit analog register
1403 * @hw: pointer to hardware structure
1404 * @reg: analog register to write
1405 * @val: value to write
1406 *
1407 * Performs write operation to Atlas analog register specified.
1408 **/
1409s32 ixgbe_write_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 val)
1410{
1411 return ixgbe_call_func(hw, hw->mac.ops.write_analog_reg8, (hw, reg,
1412 val), IXGBE_NOT_IMPLEMENTED);
1413}
1414
1415/**
1416 * ixgbe_init_uta_tables - Initializes Unicast Table Arrays.
1417 * @hw: pointer to hardware structure
1418 *
1419 * Initializes the Unicast Table Arrays to zero on device load. This
1420 * is part of the Rx init addr execution path.
1421 **/
1422s32 ixgbe_init_uta_tables(struct ixgbe_hw *hw)
1423{
1424 return ixgbe_call_func(hw, hw->mac.ops.init_uta_tables, (hw),
1425 IXGBE_NOT_IMPLEMENTED);
1426}
1427
1428/**
1429 * ixgbe_read_i2c_byte - Reads 8 bit word over I2C at specified device address
1430 * @hw: pointer to hardware structure
1431 * @byte_offset: byte offset to read
1432 * @dev_addr: I2C bus address to read from
1433 * @data: value read
1434 *
1435 * Performs byte read operation to SFP module's EEPROM over I2C interface.
1436 **/
1437s32 ixgbe_read_i2c_byte(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr,
1438 u8 *data)
1439{
1440 return ixgbe_call_func(hw, hw->phy.ops.read_i2c_byte, (hw, byte_offset,
1441 dev_addr, data), IXGBE_NOT_IMPLEMENTED);
1442}
1443
1444/**
1445 * ixgbe_read_i2c_byte_unlocked - Reads 8 bit word via I2C from device address
1446 * @hw: pointer to hardware structure
1447 * @byte_offset: byte offset to read
1448 * @dev_addr: I2C bus address to read from
1449 * @data: value read
1450 *
1451 * Performs byte read operation to SFP module's EEPROM over I2C interface.
1452 **/
1453s32 ixgbe_read_i2c_byte_unlocked(struct ixgbe_hw *hw, u8 byte_offset,
1454 u8 dev_addr, u8 *data)
1455{
1456 return ixgbe_call_func(hw, hw->phy.ops.read_i2c_byte_unlocked,
1457 (hw, byte_offset, dev_addr, data),
1458 IXGBE_NOT_IMPLEMENTED);
1459}
1460
1461/**
1462 * ixgbe_read_link - Perform read operation on link device
1463 * @hw: pointer to the hardware structure
1464 * @addr: bus address to read from
1465 * @reg: device register to read from
1466 * @val: pointer to location to receive read value
1467 *
1468 * Returns an error code on error.
1469 */
1470s32 ixgbe_read_link(struct ixgbe_hw *hw, u8 addr, u16 reg, u16 *val)
1471{
1472 return ixgbe_call_func(hw, hw->link.ops.read_link, (hw, addr,
1473 reg, val), IXGBE_NOT_IMPLEMENTED);
1474}
1475
1476/**
1477 * ixgbe_read_link_unlocked - Perform read operation on link device
1478 * @hw: pointer to the hardware structure
1479 * @addr: bus address to read from
1480 * @reg: device register to read from
1481 * @val: pointer to location to receive read value
1482 *
1483 * Returns an error code on error.
1484 **/
1485s32 ixgbe_read_link_unlocked(struct ixgbe_hw *hw, u8 addr, u16 reg, u16 *val)
1486{
1487 return ixgbe_call_func(hw, hw->link.ops.read_link_unlocked,
1488 (hw, addr, reg, val), IXGBE_NOT_IMPLEMENTED);
1489}
1490
1491/**
1492 * ixgbe_write_i2c_byte - Writes 8 bit word over I2C
1493 * @hw: pointer to hardware structure
1494 * @byte_offset: byte offset to write
1495 * @dev_addr: I2C bus address to write to
1496 * @data: value to write
1497 *
1498 * Performs byte write operation to SFP module's EEPROM over I2C interface
1499 * at a specified device address.
1500 **/
1501s32 ixgbe_write_i2c_byte(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr,
1502 u8 data)
1503{
1504 return ixgbe_call_func(hw, hw->phy.ops.write_i2c_byte, (hw, byte_offset,
1505 dev_addr, data), IXGBE_NOT_IMPLEMENTED);
1506}
1507
1508/**
1509 * ixgbe_write_i2c_byte_unlocked - Writes 8 bit word over I2C
1510 * @hw: pointer to hardware structure
1511 * @byte_offset: byte offset to write
1512 * @dev_addr: I2C bus address to write to
1513 * @data: value to write
1514 *
1515 * Performs byte write operation to SFP module's EEPROM over I2C interface
1516 * at a specified device address.
1517 **/
1518s32 ixgbe_write_i2c_byte_unlocked(struct ixgbe_hw *hw, u8 byte_offset,
1519 u8 dev_addr, u8 data)
1520{
1521 return ixgbe_call_func(hw, hw->phy.ops.write_i2c_byte_unlocked,
1522 (hw, byte_offset, dev_addr, data),
1523 IXGBE_NOT_IMPLEMENTED);
1524}
1525
1526/**
1527 * ixgbe_write_link - Perform write operation on link device
1528 * @hw: pointer to the hardware structure
1529 * @addr: bus address to write to
1530 * @reg: device register to write to
1531 * @val: value to write
1532 *
1533 * Returns an error code on error.
1534 */
1535s32 ixgbe_write_link(struct ixgbe_hw *hw, u8 addr, u16 reg, u16 val)
1536{
1537 return ixgbe_call_func(hw, hw->link.ops.write_link,
1538 (hw, addr, reg, val), IXGBE_NOT_IMPLEMENTED);
1539}
1540
1541/**
1542 * ixgbe_write_link_unlocked - Perform write operation on link device
1543 * @hw: pointer to the hardware structure
1544 * @addr: bus address to write to
1545 * @reg: device register to write to
1546 * @val: value to write
1547 *
1548 * Returns an error code on error.
1549 **/
1550s32 ixgbe_write_link_unlocked(struct ixgbe_hw *hw, u8 addr, u16 reg, u16 val)
1551{
1552 return ixgbe_call_func(hw, hw->link.ops.write_link_unlocked,
1553 (hw, addr, reg, val), IXGBE_NOT_IMPLEMENTED);
1554}
1555
1556/**
1557 * ixgbe_write_i2c_eeprom - Writes 8 bit EEPROM word over I2C interface
1558 * @hw: pointer to hardware structure
1559 * @byte_offset: EEPROM byte offset to write
1560 * @eeprom_data: value to write
1561 *
1562 * Performs byte write operation to SFP module's EEPROM over I2C interface.
1563 **/
1564s32 ixgbe_write_i2c_eeprom(struct ixgbe_hw *hw,
1565 u8 byte_offset, u8 eeprom_data)
1566{
1567 return ixgbe_call_func(hw, hw->phy.ops.write_i2c_eeprom,
1568 (hw, byte_offset, eeprom_data),
1569 IXGBE_NOT_IMPLEMENTED);
1570}
1571
1572/**
1573 * ixgbe_read_i2c_eeprom - Reads 8 bit EEPROM word over I2C interface
1574 * @hw: pointer to hardware structure
1575 * @byte_offset: EEPROM byte offset to read
1576 * @eeprom_data: value read
1577 *
1578 * Performs byte read operation to SFP module's EEPROM over I2C interface.
1579 **/
1580s32 ixgbe_read_i2c_eeprom(struct ixgbe_hw *hw, u8 byte_offset, u8 *eeprom_data)
1581{
1582 return ixgbe_call_func(hw, hw->phy.ops.read_i2c_eeprom,
1583 (hw, byte_offset, eeprom_data),
1584 IXGBE_NOT_IMPLEMENTED);
1585}
1586
1587/**
1588 * ixgbe_get_supported_physical_layer - Returns physical layer type
1589 * @hw: pointer to hardware structure
1590 *
1591 * Determines physical layer capabilities of the current configuration.
1592 **/
1593u64 ixgbe_get_supported_physical_layer(struct ixgbe_hw *hw)
1594{
1595 return ixgbe_call_func(hw, hw->mac.ops.get_supported_physical_layer,
1596 (hw), IXGBE_PHYSICAL_LAYER_UNKNOWN);
1597}
1598
1599/**
1600 * ixgbe_enable_rx_dma - Enables Rx DMA unit, dependent on device specifics
1601 * @hw: pointer to hardware structure
1602 * @regval: bitfield to write to the Rx DMA register
1603 *
1604 * Enables the Rx DMA unit of the device.
1605 **/
1606s32 ixgbe_enable_rx_dma(struct ixgbe_hw *hw, u32 regval)
1607{
1608 return ixgbe_call_func(hw, hw->mac.ops.enable_rx_dma,
1609 (hw, regval), IXGBE_NOT_IMPLEMENTED);
1610}
1611
1612/**
1613 * ixgbe_disable_sec_rx_path - Stops the receive data path
1614 * @hw: pointer to hardware structure
1615 *
1616 * Stops the receive data path.
1617 **/
1618s32 ixgbe_disable_sec_rx_path(struct ixgbe_hw *hw)
1619{
1620 return ixgbe_call_func(hw, hw->mac.ops.disable_sec_rx_path,
1621 (hw), IXGBE_NOT_IMPLEMENTED);
1622}
1623
1624/**
1625 * ixgbe_enable_sec_rx_path - Enables the receive data path
1626 * @hw: pointer to hardware structure
1627 *
1628 * Enables the receive data path.
1629 **/
1630s32 ixgbe_enable_sec_rx_path(struct ixgbe_hw *hw)
1631{
1632 return ixgbe_call_func(hw, hw->mac.ops.enable_sec_rx_path,
1633 (hw), IXGBE_NOT_IMPLEMENTED);
1634}
1635
1636/**
1637 * ixgbe_acquire_swfw_semaphore - Acquire SWFW semaphore
1638 * @hw: pointer to hardware structure
1639 * @mask: Mask to specify which semaphore to acquire
1640 *
1641 * Acquires the SWFW semaphore through SW_FW_SYNC register for the specified
1642 * function (CSR, PHY0, PHY1, EEPROM, Flash)
1643 **/
1644s32 ixgbe_acquire_swfw_semaphore(struct ixgbe_hw *hw, u32 mask)
1645{
1646 return ixgbe_call_func(hw, hw->mac.ops.acquire_swfw_sync,
1647 (hw, mask), IXGBE_NOT_IMPLEMENTED);
1648}
1649
1650/**
1651 * ixgbe_release_swfw_semaphore - Release SWFW semaphore
1652 * @hw: pointer to hardware structure
1653 * @mask: Mask to specify which semaphore to release
1654 *
1655 * Releases the SWFW semaphore through SW_FW_SYNC register for the specified
1656 * function (CSR, PHY0, PHY1, EEPROM, Flash)
1657 **/
1658void ixgbe_release_swfw_semaphore(struct ixgbe_hw *hw, u32 mask)
1659{
1660 if (hw->mac.ops.release_swfw_sync)
1661 hw->mac.ops.release_swfw_sync(hw, mask);
1662}
1663
1664/**
1665 * ixgbe_init_swfw_semaphore - Clean up SWFW semaphore
1666 * @hw: pointer to hardware structure
1667 *
1668 * Attempts to acquire the SWFW semaphore through SW_FW_SYNC register.
1669 * Regardless of whether is succeeds or not it then release the semaphore.
1670 * This is function is called to recover from catastrophic failures that
1671 * may have left the semaphore locked.
1672 **/
1673void ixgbe_init_swfw_semaphore(struct ixgbe_hw *hw)
1674{
1675 if (hw->mac.ops.init_swfw_sync)
1676 hw->mac.ops.init_swfw_sync(hw);
1677}
1678
1679
1680void ixgbe_disable_rx(struct ixgbe_hw *hw)
1681{
1682 if (hw->mac.ops.disable_rx)
1683 hw->mac.ops.disable_rx(hw);
1684}
1685
1686void ixgbe_enable_rx(struct ixgbe_hw *hw)
1687{
1688 if (hw->mac.ops.enable_rx)
1689 hw->mac.ops.enable_rx(hw);
1690}
1691
1692/**
1693 * ixgbe_set_rate_select_speed - Set module link speed
1694 * @hw: pointer to hardware structure
1695 * @speed: link speed to set
1696 *
1697 * Set module link speed via the rate select.
1698 */
1699void ixgbe_set_rate_select_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed)
1700{
1701 if (hw->mac.ops.set_rate_select_speed)
1702 hw->mac.ops.set_rate_select_speed(hw, speed);
1703}