ispmbox.h (167403) | ispmbox.h (196008) |
---|---|
1/* $FreeBSD: head/sys/dev/isp/ispmbox.h 167403 2007-03-10 02:39:54Z mjacob $ */ | 1/* $FreeBSD: head/sys/dev/isp/ispmbox.h 196008 2009-08-01 01:04:26Z mjacob $ */ |
2/*- | 2/*- |
3 * Copyright (c) 1997-2007 by Matthew Jacob | 3 * Copyright (c) 1997-2009 by Matthew Jacob |
4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. --- 7 unchanged lines hidden (view full) --- 19 * ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. | 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. --- 7 unchanged lines hidden (view full) --- 19 * ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. |
27 * |
|
27 */ 28/* 29 * Mailbox and Queue Entry Definitions for for Qlogic ISP SCSI adapters. 30 */ 31#ifndef _ISPMBOX_H 32#define _ISPMBOX_H 33 34/* --- 81 unchanged lines hidden (view full) --- 116#define MBOX_ENABLE_TARGET_MODE 0x0055 117#define ENABLE_TARGET_FLAG 0x8000 118#define ENABLE_TQING_FLAG 0x0004 119#define ENABLE_MANDATORY_DISC 0x0002 120#define MBOX_GET_TARGET_STATUS 0x0056 121 122/* These are for the ISP2X00 FC cards */ 123#define MBOX_GET_LOOP_ID 0x0020 | 28 */ 29/* 30 * Mailbox and Queue Entry Definitions for for Qlogic ISP SCSI adapters. 31 */ 32#ifndef _ISPMBOX_H 33#define _ISPMBOX_H 34 35/* --- 81 unchanged lines hidden (view full) --- 117#define MBOX_ENABLE_TARGET_MODE 0x0055 118#define ENABLE_TARGET_FLAG 0x8000 119#define ENABLE_TQING_FLAG 0x0004 120#define ENABLE_MANDATORY_DISC 0x0002 121#define MBOX_GET_TARGET_STATUS 0x0056 122 123/* These are for the ISP2X00 FC cards */ 124#define MBOX_GET_LOOP_ID 0x0020 |
125/* for 24XX cards, outgoing mailbox 7 has these values for F or FL topologies */ 126#define ISP24XX_INORDER 0x0100 127#define ISP24XX_NPIV_SAN 0x0400 128#define ISP24XX_VSAN_SAN 0x1000 129#define ISP24XX_FC_SP_SAN 0x2000 130 |
|
124#define MBOX_GET_FIRMWARE_OPTIONS 0x0028 125#define MBOX_SET_FIRMWARE_OPTIONS 0x0038 126#define MBOX_GET_RESOURCE_COUNT 0x0042 127#define MBOX_REQUEST_OFFLINE_MODE 0x0043 128#define MBOX_ENHANCED_GET_PDB 0x0047 | 131#define MBOX_GET_FIRMWARE_OPTIONS 0x0028 132#define MBOX_SET_FIRMWARE_OPTIONS 0x0038 133#define MBOX_GET_RESOURCE_COUNT 0x0042 134#define MBOX_REQUEST_OFFLINE_MODE 0x0043 135#define MBOX_ENHANCED_GET_PDB 0x0047 |
136#define MBOX_INIT_FIRMWARE_MULTI_ID 0x0048 /* 2400 only */ 137#define MBOX_GET_VP_DATABASE 0x0049 /* 2400 only */ 138#define MBOX_GET_VP_DATABASE_ENTRY 0x004a /* 2400 only */ |
|
129#define MBOX_EXEC_COMMAND_IOCB_A64 0x0054 130#define MBOX_INIT_FIRMWARE 0x0060 131#define MBOX_GET_INIT_CONTROL_BLOCK 0x0061 132#define MBOX_INIT_LIP 0x0062 133#define MBOX_GET_FC_AL_POSITION_MAP 0x0063 134#define MBOX_GET_PORT_DB 0x0064 135#define MBOX_CLEAR_ACA 0x0065 136#define MBOX_TARGET_RESET 0x0066 --- 16 unchanged lines hidden (view full) --- 153#define MBOX_GET_SET_DATA_RATE 0x005D /* 24XX/23XX only */ 154#define MBGSD_GET_RATE 0 155#define MBGSD_SET_RATE 1 156#define MBGSD_SET_RATE_NOW 2 /* 24XX only */ 157#define MBGSD_ONEGB 0 158#define MBGSD_TWOGB 1 159#define MBGSD_AUTO 2 160#define MBGSD_FOURGB 3 /* 24XX only */ | 139#define MBOX_EXEC_COMMAND_IOCB_A64 0x0054 140#define MBOX_INIT_FIRMWARE 0x0060 141#define MBOX_GET_INIT_CONTROL_BLOCK 0x0061 142#define MBOX_INIT_LIP 0x0062 143#define MBOX_GET_FC_AL_POSITION_MAP 0x0063 144#define MBOX_GET_PORT_DB 0x0064 145#define MBOX_CLEAR_ACA 0x0065 146#define MBOX_TARGET_RESET 0x0066 --- 16 unchanged lines hidden (view full) --- 163#define MBOX_GET_SET_DATA_RATE 0x005D /* 24XX/23XX only */ 164#define MBGSD_GET_RATE 0 165#define MBGSD_SET_RATE 1 166#define MBGSD_SET_RATE_NOW 2 /* 24XX only */ 167#define MBGSD_ONEGB 0 168#define MBGSD_TWOGB 1 169#define MBGSD_AUTO 2 170#define MBGSD_FOURGB 3 /* 24XX only */ |
171#define MBGSD_EIGHTGB 4 /* 25XX only */ |
|
161 162 163#define ISP2100_SET_PCI_PARAM 0x00ff 164 165#define MBOX_BUSY 0x04 166 167/* 168 * Mailbox Command Complete Status Codes --- 76 unchanged lines hidden (view full) --- 245#define ASYNC_RJT_SENT 0x8049 246 247/* 248 * All IOCB Queue entries are this size 249 */ 250#define QENTRY_LEN 64 251 252/* | 172 173 174#define ISP2100_SET_PCI_PARAM 0x00ff 175 176#define MBOX_BUSY 0x04 177 178/* 179 * Mailbox Command Complete Status Codes --- 76 unchanged lines hidden (view full) --- 256#define ASYNC_RJT_SENT 0x8049 257 258/* 259 * All IOCB Queue entries are this size 260 */ 261#define QENTRY_LEN 64 262 263/* |
264 * Special Internal Handle for IOCBs 265 */ 266#define ISP_SPCL_HANDLE 0xa5dead5a 267 268/* |
|
253 * Command Structure Definitions 254 */ 255 256typedef struct { 257 uint32_t ds_base; 258 uint32_t ds_count; 259} ispds_t; 260 --- 7 unchanged lines hidden (view full) --- 268#define DSTYPE_64BIT 1 269typedef struct { 270 uint16_t ds_type; /* 0-> ispds_t, 1-> ispds64_t */ 271 uint32_t ds_segment; /* unused */ 272 uint32_t ds_base; /* 32 bit address of DSD list */ 273} ispdslist_t; 274 275 | 269 * Command Structure Definitions 270 */ 271 272typedef struct { 273 uint32_t ds_base; 274 uint32_t ds_count; 275} ispds_t; 276 --- 7 unchanged lines hidden (view full) --- 284#define DSTYPE_64BIT 1 285typedef struct { 286 uint16_t ds_type; /* 0-> ispds_t, 1-> ispds64_t */ 287 uint32_t ds_segment; /* unused */ 288 uint32_t ds_base; /* 32 bit address of DSD list */ 289} ispdslist_t; 290 291 |
276/* 277 * These elements get swizzled around for SBus instances. 278 */ 279#define ISP_SWAP8(a, b) { \ 280 uint8_t tmp; \ 281 tmp = a; \ 282 a = b; \ 283 b = tmp; \ 284} | |
285typedef struct { 286 uint8_t rqs_entry_type; 287 uint8_t rqs_entry_count; 288 uint8_t rqs_seqno; 289 uint8_t rqs_flags; 290} isphdr_t; 291 292/* RQS Flag definitions */ 293#define RQSFLAG_CONTINUATION 0x01 294#define RQSFLAG_FULL 0x02 295#define RQSFLAG_BADHEADER 0x04 296#define RQSFLAG_BADPACKET 0x08 | 292typedef struct { 293 uint8_t rqs_entry_type; 294 uint8_t rqs_entry_count; 295 uint8_t rqs_seqno; 296 uint8_t rqs_flags; 297} isphdr_t; 298 299/* RQS Flag definitions */ 300#define RQSFLAG_CONTINUATION 0x01 301#define RQSFLAG_FULL 0x02 302#define RQSFLAG_BADHEADER 0x04 303#define RQSFLAG_BADPACKET 0x08 |
297#define RQSFLAG_MASK 0x0f | 304#define RQSFLAG_BADCOUNT 0x10 305#define RQSFLAG_BADORDER 0x20 306#define RQSFLAG_MASK 0x3f |
298 299/* RQS entry_type definitions */ 300#define RQSTYPE_REQUEST 0x01 301#define RQSTYPE_DATASEG 0x02 302#define RQSTYPE_RESPONSE 0x03 303#define RQSTYPE_MARKER 0x04 304#define RQSTYPE_CMDONLY 0x05 305#define RQSTYPE_ATIO 0x06 /* Target Mode */ --- 20 unchanged lines hidden (view full) --- 326#define RQSTYPE_CTIO4 0x1e /* Target Mode */ 327#define RQSTYPE_CTIO3 0x1f /* Target Mode */ 328#define RQSTYPE_RIO1 0x21 329#define RQSTYPE_RIO2 0x22 330#define RQSTYPE_IP_RECV 0x23 331#define RQSTYPE_IP_RECV_CONT 0x24 332#define RQSTYPE_CT_PASSTHRU 0x29 333#define RQSTYPE_MS_PASSTHRU 0x29 | 307 308/* RQS entry_type definitions */ 309#define RQSTYPE_REQUEST 0x01 310#define RQSTYPE_DATASEG 0x02 311#define RQSTYPE_RESPONSE 0x03 312#define RQSTYPE_MARKER 0x04 313#define RQSTYPE_CMDONLY 0x05 314#define RQSTYPE_ATIO 0x06 /* Target Mode */ --- 20 unchanged lines hidden (view full) --- 335#define RQSTYPE_CTIO4 0x1e /* Target Mode */ 336#define RQSTYPE_CTIO3 0x1f /* Target Mode */ 337#define RQSTYPE_RIO1 0x21 338#define RQSTYPE_RIO2 0x22 339#define RQSTYPE_IP_RECV 0x23 340#define RQSTYPE_IP_RECV_CONT 0x24 341#define RQSTYPE_CT_PASSTHRU 0x29 342#define RQSTYPE_MS_PASSTHRU 0x29 |
343#define RQSTYPE_VP_CTRL 0x30 /* 24XX only */ 344#define RQSTYPE_VP_MODIFY 0x31 /* 24XX only */ 345#define RQSTYPE_RPT_ID_ACQ 0x32 /* 24XX only */ |
|
334#define RQSTYPE_ABORT_IO 0x33 335#define RQSTYPE_T6RQS 0x48 336#define RQSTYPE_LOGIN 0x52 337#define RQSTYPE_ABTS_RCVD 0x54 /* 24XX only */ 338#define RQSTYPE_ABTS_RSP 0x55 /* 24XX only */ 339 340 341#define ISP_RQDSEG 4 --- 186 unchanged lines hidden (view full) --- 528 uint8_t req_cdb[16]; 529 uint32_t req_dl; 530 uint16_t req_tidlo; 531 uint8_t req_tidhi; 532 uint8_t req_vpidx; 533 ispds64_t req_dataseg; 534} ispreqt7_t; 535 | 346#define RQSTYPE_ABORT_IO 0x33 347#define RQSTYPE_T6RQS 0x48 348#define RQSTYPE_LOGIN 0x52 349#define RQSTYPE_ABTS_RCVD 0x54 /* 24XX only */ 350#define RQSTYPE_ABTS_RSP 0x55 /* 24XX only */ 351 352 353#define ISP_RQDSEG 4 --- 186 unchanged lines hidden (view full) --- 540 uint8_t req_cdb[16]; 541 uint32_t req_dl; 542 uint16_t req_tidlo; 543 uint8_t req_tidhi; 544 uint8_t req_vpidx; 545 ispds64_t req_dataseg; 546} ispreqt7_t; 547 |
548/* Task Management Request Function */ 549typedef struct { 550 isphdr_t tmf_header; 551 uint32_t tmf_handle; 552 uint16_t tmf_nphdl; 553 uint8_t tmf_reserved0[2]; 554 uint16_t tmf_delay; 555 uint16_t tmf_timeout; 556 uint8_t tmf_lun[8]; 557 uint32_t tmf_flags; 558 uint8_t tmf_reserved1[20]; 559 uint16_t tmf_tidlo; 560 uint8_t tmf_tidhi; 561 uint8_t tmf_vpidx; 562 uint8_t tmf_reserved2[12]; 563} isp24xx_tmf_t; 564 565#define ISP24XX_TMF_NOSEND 0x80000000 566 567#define ISP24XX_TMF_LUN_RESET 0x00000010 568#define ISP24XX_TMF_ABORT_TASK_SET 0x00000008 569#define ISP24XX_TMF_CLEAR_TASK_SET 0x00000004 570#define ISP24XX_TMF_TARGET_RESET 0x00000002 571#define ISP24XX_TMF_CLEAR_ACA 0x00000001 572 |
|
536/* I/O Abort Structure */ 537typedef struct { 538 isphdr_t abrt_header; 539 uint32_t abrt_handle; 540 uint16_t abrt_nphdl; 541 uint16_t abrt_options; 542 uint32_t abrt_cmd_handle; 543 uint8_t abrt_reserved[32]; 544 uint16_t abrt_tidlo; 545 uint8_t abrt_tidhi; 546 uint8_t abrt_vpidx; 547 uint8_t abrt_reserved1[12]; 548} isp24xx_abrt_t; | 573/* I/O Abort Structure */ 574typedef struct { 575 isphdr_t abrt_header; 576 uint32_t abrt_handle; 577 uint16_t abrt_nphdl; 578 uint16_t abrt_options; 579 uint32_t abrt_cmd_handle; 580 uint8_t abrt_reserved[32]; 581 uint16_t abrt_tidlo; 582 uint8_t abrt_tidhi; 583 uint8_t abrt_vpidx; 584 uint8_t abrt_reserved1[12]; 585} isp24xx_abrt_t; |
549#define ISP24XX_ABRT_NO_ABTS 0x01 /* don't actually send an ABTS */ | 586 587#define ISP24XX_ABRT_NOSEND 0x01 /* don't actually send ABTS */ 588#define ISP24XX_ABRT_OKAY 0x00 /* in nphdl on return */ |
550#define ISP24XX_ABRT_ENXIO 0x31 /* in nphdl on return */ 551 552#define ISP_CDSEG 7 553typedef struct { 554 isphdr_t req_header; 555 uint32_t req_reserved; 556 ispds_t req_dataseg[ISP_CDSEG]; 557} ispcontreq_t; --- 60 unchanged lines hidden (view full) --- 618 * CT Passthru IOCB 619 */ 620typedef struct { 621 isphdr_t ctp_header; 622 uint32_t ctp_handle; 623 uint16_t ctp_status; 624 uint16_t ctp_nphdl; /* n-port handle */ 625 uint16_t ctp_cmd_cnt; /* Command DSD count */ | 589#define ISP24XX_ABRT_ENXIO 0x31 /* in nphdl on return */ 590 591#define ISP_CDSEG 7 592typedef struct { 593 isphdr_t req_header; 594 uint32_t req_reserved; 595 ispds_t req_dataseg[ISP_CDSEG]; 596} ispcontreq_t; --- 60 unchanged lines hidden (view full) --- 657 * CT Passthru IOCB 658 */ 659typedef struct { 660 isphdr_t ctp_header; 661 uint32_t ctp_handle; 662 uint16_t ctp_status; 663 uint16_t ctp_nphdl; /* n-port handle */ 664 uint16_t ctp_cmd_cnt; /* Command DSD count */ |
626 uint16_t ctp_vpidx; /* low 8 bits */ | 665 uint8_t ctp_vpidx; 666 uint8_t ctp_reserved0; |
627 uint16_t ctp_time; | 667 uint16_t ctp_time; |
628 uint16_t ctp_reserved0; | 668 uint16_t ctp_reserved1; |
629 uint16_t ctp_rsp_cnt; /* Response DSD count */ | 669 uint16_t ctp_rsp_cnt; /* Response DSD count */ |
630 uint16_t ctp_reserved1[5]; | 670 uint16_t ctp_reserved2[5]; |
631 uint32_t ctp_rsp_bcnt; /* Response byte count */ 632 uint32_t ctp_cmd_bcnt; /* Command byte count */ 633 ispds64_t ctp_dataseg[2]; 634} isp_ct_pt_t; 635 636/* 637 * MS Passthru IOCB 638 */ --- 122 unchanged lines hidden (view full) --- 761#ifndef ISP_EXEC_THROTTLE 762#define ISP_EXEC_THROTTLE 16 763#endif 764 765/* 766 * About Firmware returns an 'attribute' word in mailbox 6. 767 * These attributes are for 2200 and 2300. 768 */ | 671 uint32_t ctp_rsp_bcnt; /* Response byte count */ 672 uint32_t ctp_cmd_bcnt; /* Command byte count */ 673 ispds64_t ctp_dataseg[2]; 674} isp_ct_pt_t; 675 676/* 677 * MS Passthru IOCB 678 */ --- 122 unchanged lines hidden (view full) --- 801#ifndef ISP_EXEC_THROTTLE 802#define ISP_EXEC_THROTTLE 16 803#endif 804 805/* 806 * About Firmware returns an 'attribute' word in mailbox 6. 807 * These attributes are for 2200 and 2300. 808 */ |
769#define ISP_FW_ATTR_TMODE 0x01 770#define ISP_FW_ATTR_SCCLUN 0x02 771#define ISP_FW_ATTR_FABRIC 0x04 772#define ISP_FW_ATTR_CLASS2 0x08 773#define ISP_FW_ATTR_FCTAPE 0x10 774#define ISP_FW_ATTR_IP 0x20 775#define ISP_FW_ATTR_VI 0x40 776#define ISP_FW_ATTR_VI_SOLARIS 0x80 777#define ISP_FW_ATTR_2KLOGINS 0x100 /* XXX: just a guess */ | 809#define ISP_FW_ATTR_TMODE 0x0001 810#define ISP_FW_ATTR_SCCLUN 0x0002 811#define ISP_FW_ATTR_FABRIC 0x0004 812#define ISP_FW_ATTR_CLASS2 0x0008 813#define ISP_FW_ATTR_FCTAPE 0x0010 814#define ISP_FW_ATTR_IP 0x0020 815#define ISP_FW_ATTR_VI 0x0040 816#define ISP_FW_ATTR_VI_SOLARIS 0x0080 817#define ISP_FW_ATTR_2KLOGINS 0x0100 /* just a guess... */ |
778 779/* and these are for the 2400 */ | 818 819/* and these are for the 2400 */ |
780#define ISP2400_FW_ATTR_CLASS2 (1 << 0) 781#define ISP2400_FW_ATTR_IP (1 << 1) 782#define ISP2400_FW_ATTR_MULTIID (1 << 2) 783#define ISP2400_FW_ATTR_SB2 (1 << 3) 784#define ISP2400_FW_ATTR_T10CRC (1 << 4) 785#define ISP2400_FW_ATTR_VI (1 << 5) 786#define ISP2400_FW_ATTR_EXPFW (1 << 13) | 820#define ISP2400_FW_ATTR_CLASS2 0x0001 821#define ISP2400_FW_ATTR_IP 0x0002 822#define ISP2400_FW_ATTR_MULTIID 0x0004 823#define ISP2400_FW_ATTR_SB2 0x0008 824#define ISP2400_FW_ATTR_T10CRC 0x0010 825#define ISP2400_FW_ATTR_VI 0x0020 826#define ISP2400_FW_ATTR_EXPFW 0x2000 |
787 | 827 |
828#define ISP_CAP_TMODE(isp) \ 829 (IS_24XX(isp)? 1 : (isp->isp_fwattr & ISP_FW_ATTR_TMODE)) 830#define ISP_CAP_SCCFW(isp) \ 831 (IS_24XX(isp)? 1 : (isp->isp_fwattr & ISP_FW_ATTR_SCCLUN)) 832#define ISP_CAP_2KLOGIN(isp) \ 833 (IS_24XX(isp)? 1 : (isp->isp_fwattr & ISP_FW_ATTR_2KLOGINS)) 834#define ISP_CAP_MULTI_ID(isp) \ 835 (IS_24XX(isp)? (isp->isp_fwattr & ISP2400_FW_ATTR_MULTIID) : 0) 836 837#define ISP_GET_VPIDX(isp, tag) \ 838 (ISP_CAP_MULTI_ID(isp) ? tag : 0) 839 |
|
788/* 789 * Reduced Interrupt Operation Response Queue Entreis 790 */ 791 792typedef struct { 793 isphdr_t req_header; 794 uint32_t req_handles[15]; 795} isp_rio1_t; --- 127 unchanged lines hidden (view full) --- 923#define ICB2400_OPT2_ZIO1 0x00000006 924 925#define ICB2400_OPT3_75_OHM 0x00010000 926#define ICB2400_OPT3_RATE_MASK 0x0000E000 927#define ICB2400_OPT3_RATE_ONEGB 0x00000000 928#define ICB2400_OPT3_RATE_TWOGB 0x00002000 929#define ICB2400_OPT3_RATE_AUTO 0x00004000 930#define ICB2400_OPT3_RATE_FOURGB 0x00006000 | 840/* 841 * Reduced Interrupt Operation Response Queue Entreis 842 */ 843 844typedef struct { 845 isphdr_t req_header; 846 uint32_t req_handles[15]; 847} isp_rio1_t; --- 127 unchanged lines hidden (view full) --- 975#define ICB2400_OPT2_ZIO1 0x00000006 976 977#define ICB2400_OPT3_75_OHM 0x00010000 978#define ICB2400_OPT3_RATE_MASK 0x0000E000 979#define ICB2400_OPT3_RATE_ONEGB 0x00000000 980#define ICB2400_OPT3_RATE_TWOGB 0x00002000 981#define ICB2400_OPT3_RATE_AUTO 0x00004000 982#define ICB2400_OPT3_RATE_FOURGB 0x00006000 |
983#define ICB2400_OPT3_RATE_EIGHTGB 0x00008000 |
|
931#define ICB2400_OPT3_ENA_OOF_XFRDY 0x00000200 932#define ICB2400_OPT3_NO_LOCAL_PLOGI 0x00000080 933#define ICB2400_OPT3_ENA_OOF 0x00000040 934/* note that a response size flag of zero is reserved! */ 935#define ICB2400_OPT3_RSPSZ_MASK 0x00000030 936#define ICB2400_OPT3_RSPSZ_12 0x00000010 937#define ICB2400_OPT3_RSPSZ_24 0x00000020 938#define ICB2400_OPT3_RSPSZ_32 0x00000030 --- 77 unchanged lines hidden (view full) --- 1016 ((uint64_t) array[ICB_NNM1] << 8) | \ 1017 ((uint64_t) array[ICB_NNM2] << 16) | \ 1018 ((uint64_t) array[ICB_NNM3] << 24) | \ 1019 ((uint64_t) array[ICB_NNM4] << 32) | \ 1020 ((uint64_t) array[ICB_NNM5] << 40) | \ 1021 ((uint64_t) array[ICB_NNM6] << 48) | \ 1022 ((uint64_t) array[ICB_NNM7] << 56) 1023 | 984#define ICB2400_OPT3_ENA_OOF_XFRDY 0x00000200 985#define ICB2400_OPT3_NO_LOCAL_PLOGI 0x00000080 986#define ICB2400_OPT3_ENA_OOF 0x00000040 987/* note that a response size flag of zero is reserved! */ 988#define ICB2400_OPT3_RSPSZ_MASK 0x00000030 989#define ICB2400_OPT3_RSPSZ_12 0x00000010 990#define ICB2400_OPT3_RSPSZ_24 0x00000020 991#define ICB2400_OPT3_RSPSZ_32 0x00000030 --- 77 unchanged lines hidden (view full) --- 1069 ((uint64_t) array[ICB_NNM1] << 8) | \ 1070 ((uint64_t) array[ICB_NNM2] << 16) | \ 1071 ((uint64_t) array[ICB_NNM3] << 24) | \ 1072 ((uint64_t) array[ICB_NNM4] << 32) | \ 1073 ((uint64_t) array[ICB_NNM5] << 40) | \ 1074 ((uint64_t) array[ICB_NNM6] << 48) | \ 1075 ((uint64_t) array[ICB_NNM7] << 56) 1076 |
1077 |
|
1024/* | 1078/* |
1079 * For MULTI_ID firmware, this describes a 1080 * virtual port entity for getting status. 1081 */ 1082typedef struct { 1083 uint16_t vp_port_status; 1084 uint8_t vp_port_options; 1085 uint8_t vp_port_loopid; 1086 uint8_t vp_port_portname[8]; 1087 uint8_t vp_port_nodename[8]; 1088 uint16_t vp_port_portid_lo; /* not present when trailing icb */ 1089 uint16_t vp_port_portid_hi; /* not present when trailing icb */ 1090} vp_port_info_t; 1091 1092#define ICB2400_VPOPT_TGT_DISABLE 0x00000020 /* disable target mode */ 1093#define ICB2400_VPOPT_INI_ENABLE 0x00000010 /* enable initiator mode */ 1094#define ICB2400_VPOPT_ENABLED 0x00000008 1095#define ICB2400_VPOPT_NOPLAY 0x00000004 1096#define ICB2400_VPOPT_PREVLOOP 0x00000002 1097#define ICB2400_VPOPT_HARD_ADDRESS 0x00000001 1098 1099#define ICB2400_VPOPT_WRITE_SIZE 20 1100 1101/* 1102 * For MULTI_ID firmware, we append this structure 1103 * to the isp_icb_2400_t above, followed by a list 1104 * structures that are *most* of the vp_port_info_t. 1105 */ 1106typedef struct { 1107 uint16_t vp_count; 1108 uint16_t vp_global_options; 1109} isp_icb_2400_vpinfo_t; 1110 1111#define ICB2400_VPINFO_OFF 0x80 /* offset from start of ICB */ 1112#define ICB2400_VPINFO_PORT_OFF(chan) \ 1113 ICB2400_VPINFO_OFF + \ 1114 sizeof (isp_icb_2400_vpinfo_t) + ((chan - 1) * ICB2400_VPOPT_WRITE_SIZE) 1115 1116#define ICB2400_VPGOPT_MID_DISABLE 0x02 1117 1118typedef struct { 1119 isphdr_t vp_ctrl_hdr; 1120 uint32_t vp_ctrl_handle; 1121 uint16_t vp_ctrl_index_fail; 1122 uint16_t vp_ctrl_status; 1123 uint16_t vp_ctrl_command; 1124 uint16_t vp_ctrl_vp_count; 1125 uint16_t vp_ctrl_idmap[8]; 1126 uint8_t vp_ctrl_reserved[32]; 1127} vp_ctrl_info_t; 1128 1129#define VP_CTRL_CMD_ENABLE_VP 0 1130#define VP_CTRL_CMD_DISABLE_VP 8 1131#define VP_CTRL_CMD_DISABLE_VP_REINIT_LINK 9 1132#define VP_CTRL_CMD_DISABLE_VP_LOGO 0xA 1133 1134/* 1135 * We can use this structure for modifying either one or two VP ports after initialization 1136 */ 1137typedef struct { 1138 isphdr_t vp_mod_hdr; 1139 uint32_t vp_mod_hdl; 1140 uint16_t vp_mod_reserved0; 1141 uint16_t vp_mod_status; 1142 uint8_t vp_mod_cmd; 1143 uint8_t vp_mod_cnt; 1144 uint8_t vp_mod_idx0; 1145 uint8_t vp_mod_idx1; 1146 struct { 1147 uint8_t options; 1148 uint8_t loopid; 1149 uint16_t reserved1; 1150 uint8_t wwpn[8]; 1151 uint8_t wwnn[8]; 1152 } vp_mod_ports[2]; 1153 uint8_t vp_mod_reserved2[8]; 1154} vp_modify_t; 1155 1156#define VP_STS_OK 0x00 1157#define VP_STS_ERR 0x01 1158#define VP_CNT_ERR 0x02 1159#define VP_GEN_ERR 0x03 1160#define VP_IDX_ERR 0x04 1161#define VP_STS_BSY 0x05 1162 1163#define VP_MODIFY_VP 0x00 1164#define VP_MODIFY_ENA 0x01 1165 1166/* |
|
1025 * Port Data Base Element 1026 */ 1027 1028typedef struct { 1029 uint16_t pdb_options; 1030 uint8_t pdb_mstate; 1031 uint8_t pdb_sstate; 1032 uint8_t pdb_hardaddr_bits[4]; --- 82 unchanged lines hidden (view full) --- 1115 1116#define PDB2400_TID_SUPPORTED 0x4000 1117#define PDB2400_FC_TAPE 0x0080 1118#define PDB2400_CLASS2_ACK0 0x0040 1119#define PDB2400_FCP_CONF 0x0020 1120#define PDB2400_CLASS2 0x0010 1121#define PDB2400_ADDR_VALID 0x0002 1122 | 1167 * Port Data Base Element 1168 */ 1169 1170typedef struct { 1171 uint16_t pdb_options; 1172 uint8_t pdb_mstate; 1173 uint8_t pdb_sstate; 1174 uint8_t pdb_hardaddr_bits[4]; --- 82 unchanged lines hidden (view full) --- 1257 1258#define PDB2400_TID_SUPPORTED 0x4000 1259#define PDB2400_FC_TAPE 0x0080 1260#define PDB2400_CLASS2_ACK0 0x0040 1261#define PDB2400_FCP_CONF 0x0020 1262#define PDB2400_CLASS2 0x0010 1263#define PDB2400_ADDR_VALID 0x0002 1264 |
1265#define PDB2400_STATE_PLOGI_PEND 0x03 1266#define PDB2400_STATE_PLOGI_DONE 0x04 1267#define PDB2400_STATE_PRLI_PEND 0x05 1268#define PDB2400_STATE_LOGGED_IN 0x06 1269#define PDB2400_STATE_PORT_UNAVAIL 0x07 1270#define PDB2400_STATE_PRLO_PEND 0x09 1271#define PDB2400_STATE_LOGO_PEND 0x0B 1272 |
|
1123/* 1124 * Common elements from the above two structures that are actually useful to us. 1125 */ 1126typedef struct { 1127 uint16_t handle; 1128 uint16_t reserved; 1129 uint32_t s3_role : 8, 1130 portid : 24; 1131 uint8_t portname[8]; 1132 uint8_t nodename[8]; 1133} isp_pdb_t; 1134 1135/* | 1273/* 1274 * Common elements from the above two structures that are actually useful to us. 1275 */ 1276typedef struct { 1277 uint16_t handle; 1278 uint16_t reserved; 1279 uint32_t s3_role : 8, 1280 portid : 24; 1281 uint8_t portname[8]; 1282 uint8_t nodename[8]; 1283} isp_pdb_t; 1284 1285/* |
1286 * Port Database Changed Async Event information for 24XX cards 1287 */ 1288#define PDB24XX_AE_OK 0x00 1289#define PDB24XX_AE_IMPL_LOGO_1 0x01 1290#define PDB24XX_AE_IMPL_LOGO_2 0x02 1291#define PDB24XX_AE_IMPL_LOGO_3 0x03 1292#define PDB24XX_AE_PLOGI_RCVD 0x04 1293#define PDB24XX_AE_PLOGI_RJT 0x05 1294#define PDB24XX_AE_PRLI_RCVD 0x06 1295#define PDB24XX_AE_PRLI_RJT 0x07 1296#define PDB24XX_AE_TPRLO 0x08 1297#define PDB24XX_AE_TPRLO_RJT 0x09 1298#define PDB24XX_AE_PRLO_RCVD 0x0a 1299#define PDB24XX_AE_LOGO_RCVD 0x0b 1300#define PDB24XX_AE_TOPO_CHG 0x0c 1301#define PDB24XX_AE_NPORT_CHG 0x0d 1302#define PDB24XX_AE_FLOGI_RJT 0x0e 1303#define PDB24XX_AE_BAD_FANN 0x0f 1304#define PDB24XX_AE_FLOGI_TIMO 0x10 1305#define PDB24XX_AE_ABX_LOGO 0x11 1306#define PDB24XX_AE_PLOGI_DONE 0x12 1307#define PDB24XX_AE_PRLI_DONJE 0x13 1308#define PDB24XX_AE_OPN_1 0x14 1309#define PDB24XX_AE_OPN_2 0x15 1310#define PDB24XX_AE_TXERR 0x16 1311#define PDB24XX_AE_FORCED_LOGO 0x17 1312#define PDB24XX_AE_DISC_TIMO 0x18 1313 1314/* |
|
1136 * Genericized Port Login/Logout software structure 1137 */ 1138typedef struct { 1139 uint16_t handle; | 1315 * Genericized Port Login/Logout software structure 1316 */ 1317typedef struct { 1318 uint16_t handle; |
1319 uint16_t channel; |
|
1140 uint32_t 1141 flags : 8, 1142 portid : 24; 1143} isp_plcmd_t; 1144/* the flags to use are those for PLOGX_FLG_* below */ 1145 1146/* 1147 * ISP24XX- Login/Logout Port IOCB --- 48 unchanged lines hidden (view full) --- 1196#define PLOGX_FLG_EXPLICIT_LOGO 0x40 /* if with LOGO */ 1197#define PLOGX_FLG_COMMON_FEATURES 0x80 /* if with PLOGI */ 1198#define PLOGX_FLG_FREE_NPHDL 0x80 /* if with with LOGO */ 1199 1200#define PLOGX_FLG_CLASS2 0x100 /* if with PLOGI */ 1201#define PLOGX_FLG_FCP2_OVERRIDE 0x200 /* if with PRLOG, PRLI */ 1202 1203/* | 1320 uint32_t 1321 flags : 8, 1322 portid : 24; 1323} isp_plcmd_t; 1324/* the flags to use are those for PLOGX_FLG_* below */ 1325 1326/* 1327 * ISP24XX- Login/Logout Port IOCB --- 48 unchanged lines hidden (view full) --- 1376#define PLOGX_FLG_EXPLICIT_LOGO 0x40 /* if with LOGO */ 1377#define PLOGX_FLG_COMMON_FEATURES 0x80 /* if with PLOGI */ 1378#define PLOGX_FLG_FREE_NPHDL 0x80 /* if with with LOGO */ 1379 1380#define PLOGX_FLG_CLASS2 0x100 /* if with PLOGI */ 1381#define PLOGX_FLG_FCP2_OVERRIDE 0x200 /* if with PRLOG, PRLI */ 1382 1383/* |
1384 * Report ID Acquisistion (24XX multi-id firmware) 1385 */ 1386typedef struct { 1387 isphdr_t ridacq_hdr; 1388 uint32_t ridacq_handle; 1389 union { 1390 struct { 1391 uint8_t ridacq_vp_acquired; 1392 uint8_t ridacq_vp_setup; 1393 uint16_t ridacq_reserved0; 1394 } type0; /* type 0 */ 1395 struct { 1396 uint16_t ridacq_vp_count; 1397 uint8_t ridacq_vp_index; 1398 uint8_t ridacq_vp_status; 1399 } type1; /* type 1 */ 1400 } un; 1401 uint16_t ridacq_vp_port_lo; 1402 uint8_t ridacq_vp_port_hi; 1403 uint8_t ridacq_format; /* 0 or 1 */ 1404 uint16_t ridacq_map[8]; 1405 uint8_t ridacq_reserved1[32]; 1406} isp_ridacq_t; 1407 1408#define RIDACQ_STS_COMPLETE 0 1409#define RIDACQ_STS_UNACQUIRED 1 1410#define RIDACQ_STS_CHANGED 20 1411 1412 1413/* |
|
1204 * Simple Name Server Data Structures 1205 */ 1206#define SNS_GA_NXT 0x100 1207#define SNS_GPN_ID 0x112 1208#define SNS_GNN_ID 0x113 1209#define SNS_GFF_ID 0x11F 1210#define SNS_GID_FT 0x171 1211#define SNS_RFT_ID 0x217 --- 168 unchanged lines hidden (view full) --- 1380#define els_recv_dsd_length inout.out._els_recv_dsd_length 1381#define els_recv_dsd_a1500 inout.out._els_recv_dsd_a1500 1382#define els_recv_dsd_a3116 inout.out._els_recv_dsd_a3116 1383#define els_recv_dsd_a4732 inout.out._els_recv_dsd_a4732 1384#define els_recv_dsd_a6348 inout.out._els_recv_dsd_a6348 1385} els_t; 1386 1387/* | 1414 * Simple Name Server Data Structures 1415 */ 1416#define SNS_GA_NXT 0x100 1417#define SNS_GPN_ID 0x112 1418#define SNS_GNN_ID 0x113 1419#define SNS_GFF_ID 0x11F 1420#define SNS_GID_FT 0x171 1421#define SNS_RFT_ID 0x217 --- 168 unchanged lines hidden (view full) --- 1590#define els_recv_dsd_length inout.out._els_recv_dsd_length 1591#define els_recv_dsd_a1500 inout.out._els_recv_dsd_a1500 1592#define els_recv_dsd_a3116 inout.out._els_recv_dsd_a3116 1593#define els_recv_dsd_a4732 inout.out._els_recv_dsd_a4732 1594#define els_recv_dsd_a6348 inout.out._els_recv_dsd_a6348 1595} els_t; 1596 1597/* |
1388 * A handy package structure for running FC-SCSI commands via RUN IOCB A64. | 1598 * A handy package structure for running FC-SCSI commands internally |
1389 */ 1390typedef struct { 1391 uint16_t handle; 1392 uint16_t lun; | 1599 */ 1600typedef struct { 1601 uint16_t handle; 1602 uint16_t lun; |
1393 uint32_t portid; | 1603 uint32_t 1604 channel : 8, 1605 portid : 24; |
1394 uint32_t timeout; 1395 union { 1396 struct { 1397 uint32_t data_length; | 1606 uint32_t timeout; 1607 union { 1608 struct { 1609 uint32_t data_length; |
1398 uint8_t do_read; 1399 uint8_t pad[3]; | 1610 uint32_t 1611 no_wait : 1, 1612 do_read : 1; |
1400 uint8_t cdb[16]; 1401 void *data_ptr; 1402 } beg; 1403 struct { 1404 uint32_t data_residual; 1405 uint8_t status; 1406 uint8_t pad; 1407 uint16_t sense_length; 1408 uint8_t sense_data[32]; 1409 } end; 1410 } fcd; 1411} isp_xcmd_t; | 1613 uint8_t cdb[16]; 1614 void *data_ptr; 1615 } beg; 1616 struct { 1617 uint32_t data_residual; 1618 uint8_t status; 1619 uint8_t pad; 1620 uint16_t sense_length; 1621 uint8_t sense_data[32]; 1622 } end; 1623 } fcd; 1624} isp_xcmd_t; |
1625 1626/* 1627 * Target Mode related definitions 1628 */ 1629#define QLTM_SENSELEN 18 /* non-FC cards only */ 1630#define QLTM_SVALID 0x80 1631 1632/* 1633 * Structure for Enable Lun and Modify Lun queue entries 1634 */ 1635typedef struct { 1636 isphdr_t le_header; 1637 uint32_t le_reserved; 1638 uint8_t le_lun; 1639 uint8_t le_rsvd; 1640 uint8_t le_ops; /* Modify LUN only */ 1641 uint8_t le_tgt; /* Not for FC */ 1642 uint32_t le_flags; /* Not for FC */ 1643 uint8_t le_status; 1644 uint8_t le_reserved2; 1645 uint8_t le_cmd_count; 1646 uint8_t le_in_count; 1647 uint8_t le_cdb6len; /* Not for FC */ 1648 uint8_t le_cdb7len; /* Not for FC */ 1649 uint16_t le_timeout; 1650 uint16_t le_reserved3[20]; 1651} lun_entry_t; 1652 1653/* 1654 * le_flags values 1655 */ 1656#define LUN_TQAE 0x00000002 /* bit1 Tagged Queue Action Enable */ 1657#define LUN_DSSM 0x01000000 /* bit24 Disable Sending SDP Message */ 1658#define LUN_DISAD 0x02000000 /* bit25 Disable autodisconnect */ 1659#define LUN_DM 0x40000000 /* bit30 Disconnects Mandatory */ 1660 1661/* 1662 * le_ops values 1663 */ 1664#define LUN_CCINCR 0x01 /* increment command count */ 1665#define LUN_CCDECR 0x02 /* decrement command count */ 1666#define LUN_ININCR 0x40 /* increment immed. notify count */ 1667#define LUN_INDECR 0x80 /* decrement immed. notify count */ 1668 1669/* 1670 * le_status values 1671 */ 1672#define LUN_OK 0x01 /* we be rockin' */ 1673#define LUN_ERR 0x04 /* request completed with error */ 1674#define LUN_INVAL 0x06 /* invalid request */ 1675#define LUN_NOCAP 0x16 /* can't provide requested capability */ 1676#define LUN_ENABLED 0x3E /* LUN already enabled */ 1677 1678/* 1679 * Immediate Notify Entry structure 1680 */ 1681#define IN_MSGLEN 8 /* 8 bytes */ 1682#define IN_RSVDLEN 8 /* 8 words */ 1683typedef struct { 1684 isphdr_t in_header; 1685 uint32_t in_reserved; 1686 uint8_t in_lun; /* lun */ 1687 uint8_t in_iid; /* initiator */ 1688 uint8_t in_reserved2; 1689 uint8_t in_tgt; /* target */ 1690 uint32_t in_flags; 1691 uint8_t in_status; 1692 uint8_t in_rsvd2; 1693 uint8_t in_tag_val; /* tag value */ 1694 uint8_t in_tag_type; /* tag type */ 1695 uint16_t in_seqid; /* sequence id */ 1696 uint8_t in_msg[IN_MSGLEN]; /* SCSI message bytes */ 1697 uint16_t in_reserved3[IN_RSVDLEN]; 1698 uint8_t in_sense[QLTM_SENSELEN];/* suggested sense data */ 1699} in_entry_t; 1700 1701typedef struct { 1702 isphdr_t in_header; 1703 uint32_t in_reserved; 1704 uint8_t in_lun; /* lun */ 1705 uint8_t in_iid; /* initiator */ 1706 uint16_t in_scclun; 1707 uint32_t in_reserved2; 1708 uint16_t in_status; 1709 uint16_t in_task_flags; 1710 uint16_t in_seqid; /* sequence id */ 1711} in_fcentry_t; 1712 1713typedef struct { 1714 isphdr_t in_header; 1715 uint32_t in_reserved; 1716 uint16_t in_iid; /* initiator */ 1717 uint16_t in_scclun; 1718 uint32_t in_reserved2; 1719 uint16_t in_status; 1720 uint16_t in_task_flags; 1721 uint16_t in_seqid; /* sequence id */ 1722} in_fcentry_e_t; 1723 1724/* 1725 * Values for the in_status field 1726 */ 1727#define IN_REJECT 0x0D /* Message Reject message received */ 1728#define IN_RESET 0x0E /* Bus Reset occurred */ 1729#define IN_NO_RCAP 0x16 /* requested capability not available */ 1730#define IN_IDE_RECEIVED 0x33 /* Initiator Detected Error msg received */ 1731#define IN_RSRC_UNAVAIL 0x34 /* resource unavailable */ 1732#define IN_MSG_RECEIVED 0x36 /* SCSI message received */ 1733#define IN_ABORT_TASK 0x20 /* task named in RX_ID is being aborted (FC) */ 1734#define IN_PORT_LOGOUT 0x29 /* port has logged out (FC) */ 1735#define IN_PORT_CHANGED 0x2A /* port changed */ 1736#define IN_GLOBAL_LOGO 0x2E /* all ports logged out */ 1737#define IN_NO_NEXUS 0x3B /* Nexus not established */ 1738 1739/* 1740 * Values for the in_task_flags field- should only get one at a time! 1741 */ 1742#define TASK_FLAGS_RESERVED_MASK (0xe700) 1743#define TASK_FLAGS_CLEAR_ACA (1<<14) 1744#define TASK_FLAGS_TARGET_RESET (1<<13) 1745#define TASK_FLAGS_LUN_RESET (1<<12) 1746#define TASK_FLAGS_CLEAR_TASK_SET (1<<10) 1747#define TASK_FLAGS_ABORT_TASK_SET (1<<9) 1748 1749/* 1750 * ISP24XX Immediate Notify 1751 */ 1752typedef struct { 1753 isphdr_t in_header; 1754 uint32_t in_reserved; 1755 uint16_t in_nphdl; 1756 uint16_t in_reserved1; 1757 uint16_t in_flags; 1758 uint16_t in_srr_rxid; 1759 uint16_t in_status; 1760 uint8_t in_status_subcode; 1761 uint8_t in_reserved2; 1762 uint32_t in_rxid; 1763 uint16_t in_srr_reloff_lo; 1764 uint16_t in_srr_reloff_hi; 1765 uint16_t in_srr_iu; 1766 uint16_t in_srr_oxid; 1767 /* 1768 * If bit 2 is set in in_flags, the following 1769 * two tags are valid. If the received ELS is 1770 * a LOGO, then these tags contain the N Port ID 1771 * from the LOGO payload. If the received ELS 1772 * request is TPRLO, these tags contain the 1773 * Third Party Originator N Port ID. 1774 */ 1775 uint16_t in_nport_id_hi; 1776 uint8_t in_nport_id_lo; 1777 uint8_t in_reserved3; 1778 /* 1779 * If bit 2 is set in in_flags, the following 1780 * tag is valid. If the received ELS is a LOGO, 1781 * then this tag contains the n-port handle 1782 * from the LOGO payload. If the received ELS 1783 * request is TPRLO, this tag contain the 1784 * n-port handle for the Third Party Originator. 1785 */ 1786 uint16_t in_np_handle; 1787 uint8_t in_reserved4[12]; 1788 uint8_t in_reserved5; 1789 uint8_t in_vpidx; 1790 uint32_t in_reserved6; 1791 uint16_t in_portid_lo; 1792 uint8_t in_portid_hi; 1793 uint8_t in_reserved7; 1794 uint16_t in_reserved8; 1795 uint16_t in_oxid; 1796} in_fcentry_24xx_t; 1797 1798#define IN24XX_FLAG_PUREX_IOCB 0x1 1799#define IN24XX_FLAG_GLOBAL_LOGOUT 0x2 1800#define IN24XX_FLAG_NPHDL_VALID 0x4 1801 1802#define IN24XX_LIP_RESET 0x0E 1803#define IN24XX_LINK_RESET 0x0F 1804#define IN24XX_PORT_LOGOUT 0x29 1805#define IN24XX_PORT_CHANGED 0x2A 1806#define IN24XX_LINK_FAILED 0x2E 1807#define IN24XX_SRR_RCVD 0x45 1808#define IN24XX_ELS_RCVD 0x46 /* 1809 * login-affectin ELS received- check 1810 * subcode for specific opcode 1811 */ 1812 1813/* 1814 * For f/w > 4.0.25, these offsets in the Immediate Notify contain 1815 * the WWNN/WWPN if the ELS is PLOGI, PDISC or ADISC. The WWN is in 1816 * Big Endian format. 1817 */ 1818#define IN24XX_PLOGI_WWNN_OFF 0x20 1819#define IN24XX_PLOGI_WWPN_OFF 0x28 1820 1821/* 1822 * For f/w > 4.0.25, this offset in the Immediate Notify contain 1823 * the WWPN if the ELS is LOGO. The WWN is in Big Endian format. 1824 */ 1825#define IN24XX_LOGO_WWPN_OFF 0x28 1826 1827/* 1828 * Immediate Notify Status Subcodes for IN24XX_PORT_LOGOUT 1829 */ 1830#define IN24XX_PORT_LOGOUT_PDISC_TMO 0x00 1831#define IN24XX_PORT_LOGOUT_UXPR_DISC 0x01 1832#define IN24XX_PORT_LOGOUT_OWN_OPN 0x02 1833#define IN24XX_PORT_LOGOUT_OWN_OPN_SFT 0x03 1834#define IN24XX_PORT_LOGOUT_ABTS_TMO 0x04 1835#define IN24XX_PORT_LOGOUT_DISC_RJT 0x05 1836#define IN24XX_PORT_LOGOUT_LOGIN_NEEDED 0x06 1837#define IN24XX_PORT_LOGOUT_BAD_DISC 0x07 1838#define IN24XX_PORT_LOGOUT_LOST_ALPA 0x08 1839#define IN24XX_PORT_LOGOUT_XMIT_FAILURE 0x09 1840 1841/* 1842 * Immediate Notify Status Subcodes for IN24XX_PORT_CHANGED 1843 */ 1844#define IN24XX_PORT_CHANGED_BADFAN 0x00 1845#define IN24XX_PORT_CHANGED_TOPO_CHANGE 0x01 1846#define IN24XX_PORT_CHANGED_FLOGI_ACC 0x02 1847#define IN24XX_PORT_CHANGED_FLOGI_RJT 0x03 1848#define IN24XX_PORT_CHANGED_TIMEOUT 0x04 1849#define IN24XX_PORT_CHANGED_PORT_CHANGE 0x05 1850 1851/* 1852 * Notify Acknowledge Entry structure 1853 */ 1854#define NA_RSVDLEN 22 1855typedef struct { 1856 isphdr_t na_header; 1857 uint32_t na_reserved; 1858 uint8_t na_lun; /* lun */ 1859 uint8_t na_iid; /* initiator */ 1860 uint8_t na_reserved2; 1861 uint8_t na_tgt; /* target */ 1862 uint32_t na_flags; 1863 uint8_t na_status; 1864 uint8_t na_event; 1865 uint16_t na_seqid; /* sequence id */ 1866 uint16_t na_reserved3[NA_RSVDLEN]; 1867} na_entry_t; 1868 1869/* 1870 * Value for the na_event field 1871 */ 1872#define NA_RST_CLRD 0x80 /* Clear an async event notification */ 1873#define NA_OK 0x01 /* Notify Acknowledge Succeeded */ 1874#define NA_INVALID 0x06 /* Invalid Notify Acknowledge */ 1875 1876#define NA2_RSVDLEN 21 1877typedef struct { 1878 isphdr_t na_header; 1879 uint32_t na_reserved; 1880 uint8_t na_reserved1; 1881 uint8_t na_iid; /* initiator loop id */ 1882 uint16_t na_response; 1883 uint16_t na_flags; 1884 uint16_t na_reserved2; 1885 uint16_t na_status; 1886 uint16_t na_task_flags; 1887 uint16_t na_seqid; /* sequence id */ 1888 uint16_t na_reserved3[NA2_RSVDLEN]; 1889} na_fcentry_t; 1890 1891typedef struct { 1892 isphdr_t na_header; 1893 uint32_t na_reserved; 1894 uint16_t na_iid; /* initiator loop id */ 1895 uint16_t na_response; /* response code */ 1896 uint16_t na_flags; 1897 uint16_t na_reserved2; 1898 uint16_t na_status; 1899 uint16_t na_task_flags; 1900 uint16_t na_seqid; /* sequence id */ 1901 uint16_t na_reserved3[NA2_RSVDLEN]; 1902} na_fcentry_e_t; 1903 1904#define NAFC_RCOUNT 0x80 /* increment resource count */ 1905#define NAFC_RST_CLRD 0x20 /* Clear LIP Reset */ 1906#define NAFC_TVALID 0x10 /* task mangement response code is valid */ 1907 1908/* 1909 * ISP24XX Notify Acknowledge 1910 */ 1911 1912typedef struct { 1913 isphdr_t na_header; 1914 uint32_t na_handle; 1915 uint16_t na_nphdl; 1916 uint16_t na_reserved1; 1917 uint16_t na_flags; 1918 uint16_t na_srr_rxid; 1919 uint16_t na_status; 1920 uint8_t na_status_subcode; 1921 uint8_t na_reserved2; 1922 uint32_t na_rxid; 1923 uint16_t na_srr_reloff_lo; 1924 uint16_t na_srr_reloff_hi; 1925 uint16_t na_srr_iu; 1926 uint16_t na_srr_flags; 1927 uint8_t na_reserved3[18]; 1928 uint8_t na_reserved4; 1929 uint8_t na_vpidx; 1930 uint8_t na_srr_reject_vunique; 1931 uint8_t na_srr_reject_explanation; 1932 uint8_t na_srr_reject_code; 1933 uint8_t na_reserved5; 1934 uint8_t na_reserved6[6]; 1935 uint16_t na_oxid; 1936} na_fcentry_24xx_t; 1937 1938/* 1939 * Accept Target I/O Entry structure 1940 */ 1941#define ATIO_CDBLEN 26 1942 1943typedef struct { 1944 isphdr_t at_header; 1945 uint16_t at_reserved; 1946 uint16_t at_handle; 1947 uint8_t at_lun; /* lun */ 1948 uint8_t at_iid; /* initiator */ 1949 uint8_t at_cdblen; /* cdb length */ 1950 uint8_t at_tgt; /* target */ 1951 uint32_t at_flags; 1952 uint8_t at_status; /* firmware status */ 1953 uint8_t at_scsi_status; /* scsi status */ 1954 uint8_t at_tag_val; /* tag value */ 1955 uint8_t at_tag_type; /* tag type */ 1956 uint8_t at_cdb[ATIO_CDBLEN]; /* received CDB */ 1957 uint8_t at_sense[QLTM_SENSELEN];/* suggested sense data */ 1958} at_entry_t; 1959 1960/* 1961 * at_flags values 1962 */ 1963#define AT_NODISC 0x00008000 /* disconnect disabled */ 1964#define AT_TQAE 0x00000002 /* Tagged Queue Action enabled */ 1965 1966/* 1967 * at_status values 1968 */ 1969#define AT_PATH_INVALID 0x07 /* ATIO sent to firmware for disabled lun */ 1970#define AT_RESET 0x0E /* SCSI Bus Reset Occurred */ 1971#define AT_PHASE_ERROR 0x14 /* Bus phase sequence error */ 1972#define AT_NOCAP 0x16 /* Requested capability not available */ 1973#define AT_BDR_MSG 0x17 /* Bus Device Reset msg received */ 1974#define AT_CDB 0x3D /* CDB received */ 1975/* 1976 * Macros to create and fetch and test concatenated handle and tag value macros 1977 * (SPI only) 1978 */ 1979#define AT_MAKE_TAGID(tid, aep) \ 1980 tid = aep->at_handle; \ 1981 if (aep->at_flags & AT_TQAE) { \ 1982 tid |= (aep->at_tag_val << 16); \ 1983 tid |= (1 << 24); \ 1984 } 1985 1986#define CT_MAKE_TAGID(tid, ct) \ 1987 tid = ct->ct_fwhandle; \ 1988 if (ct->ct_flags & CT_TQAE) { \ 1989 tid |= (ct->ct_tag_val << 16); \ 1990 tid |= (1 << 24); \ 1991 } 1992 1993#define AT_HAS_TAG(val) ((val) & (1 << 24)) 1994#define AT_GET_TAG(val) (((val) >> 16) & 0xff) 1995#define AT_GET_HANDLE(val) ((val) & 0xffff) 1996 1997#define IN_MAKE_TAGID(tid, inp) \ 1998 tid = inp->in_seqid; \ 1999 tid |= (inp->in_tag_val << 16); \ 2000 tid |= (1 << 24) 2001 2002/* 2003 * Accept Target I/O Entry structure, Type 2 2004 */ 2005#define ATIO2_CDBLEN 16 2006 2007typedef struct { 2008 isphdr_t at_header; 2009 uint32_t at_reserved; 2010 uint8_t at_lun; /* lun or reserved */ 2011 uint8_t at_iid; /* initiator */ 2012 uint16_t at_rxid; /* response ID */ 2013 uint16_t at_flags; 2014 uint16_t at_status; /* firmware status */ 2015 uint8_t at_crn; /* command reference number */ 2016 uint8_t at_taskcodes; 2017 uint8_t at_taskflags; 2018 uint8_t at_execodes; 2019 uint8_t at_cdb[ATIO2_CDBLEN]; /* received CDB */ 2020 uint32_t at_datalen; /* allocated data len */ 2021 uint16_t at_scclun; /* SCC Lun or reserved */ 2022 uint16_t at_wwpn[4]; /* WWPN of initiator */ 2023 uint16_t at_reserved2[6]; 2024 uint16_t at_oxid; 2025} at2_entry_t; 2026 2027typedef struct { 2028 isphdr_t at_header; 2029 uint32_t at_reserved; 2030 uint16_t at_iid; /* initiator */ 2031 uint16_t at_rxid; /* response ID */ 2032 uint16_t at_flags; 2033 uint16_t at_status; /* firmware status */ 2034 uint8_t at_crn; /* command reference number */ 2035 uint8_t at_taskcodes; 2036 uint8_t at_taskflags; 2037 uint8_t at_execodes; 2038 uint8_t at_cdb[ATIO2_CDBLEN]; /* received CDB */ 2039 uint32_t at_datalen; /* allocated data len */ 2040 uint16_t at_scclun; /* SCC Lun or reserved */ 2041 uint16_t at_wwpn[4]; /* WWPN of initiator */ 2042 uint16_t at_reserved2[6]; 2043 uint16_t at_oxid; 2044} at2e_entry_t; 2045 2046#define ATIO2_WWPN_OFFSET 0x2A 2047#define ATIO2_OXID_OFFSET 0x3E 2048 2049#define ATIO2_TC_ATTR_MASK 0x7 2050#define ATIO2_TC_ATTR_SIMPLEQ 0 2051#define ATIO2_TC_ATTR_HEADOFQ 1 2052#define ATIO2_TC_ATTR_ORDERED 2 2053#define ATIO2_TC_ATTR_ACAQ 4 2054#define ATIO2_TC_ATTR_UNTAGGED 5 2055 2056#define ATIO2_EX_WRITE 0x1 2057#define ATIO2_EX_READ 0x2 2058/* 2059 * Macros to create and fetch and test concatenated handle and tag value macros 2060 */ 2061#define AT2_MAKE_TAGID(tid, bus, inst, aep) \ 2062 tid = aep->at_rxid; \ 2063 tid |= (((uint64_t)inst) << 32); \ 2064 tid |= (((uint64_t)bus) << 48) 2065 2066#define CT2_MAKE_TAGID(tid, bus, inst, ct) \ 2067 tid = ct->ct_rxid; \ 2068 tid |= (((uint64_t)inst) << 32); \ 2069 tid |= (((uint64_t)(bus & 0xff)) << 48) 2070 2071#define AT2_HAS_TAG(val) 1 2072#define AT2_GET_TAG(val) ((val) & 0xffffffff) 2073#define AT2_GET_INST(val) (((val) >> 32) & 0xffff) 2074#define AT2_GET_HANDLE AT2_GET_TAG 2075#define AT2_GET_BUS(val) (((val) >> 48) & 0xff) 2076 2077#define FC_HAS_TAG AT2_HAS_TAG 2078#define FC_GET_TAG AT2_GET_TAG 2079#define FC_GET_INST AT2_GET_INST 2080#define FC_GET_HANDLE AT2_GET_HANDLE 2081 2082#define IN_FC_MAKE_TAGID(tid, bus, inst, seqid) \ 2083 tid = seqid; \ 2084 tid |= (((uint64_t)inst) << 32); \ 2085 tid |= (((uint64_t)(bus & 0xff)) << 48) 2086 2087#define FC_TAG_INSERT_INST(tid, inst) \ 2088 tid &= ~0x0000ffff00000000ull; \ 2089 tid |= (((uint64_t)inst) << 32) 2090 2091/* 2092 * 24XX ATIO Definition 2093 * 2094 * This is *quite* different from other entry types. 2095 * First of all, it has its own queue it comes in on. 2096 * 2097 * Secondly, it doesn't have a normal header. 2098 * 2099 * Thirdly, it's just a passthru of the FCP CMND IU 2100 * which is recorded in big endian mode. 2101 */ 2102typedef struct { 2103 uint8_t at_type; 2104 uint8_t at_count; 2105 /* 2106 * Task attribute in high four bits, 2107 * the rest is the FCP CMND IU Length. 2108 * NB: the command can extend past the 2109 * length for a single queue entry. 2110 */ 2111 uint16_t at_ta_len; 2112 uint32_t at_rxid; 2113 fc_hdr_t at_hdr; 2114 fcp_cmnd_iu_t at_cmnd; 2115} at7_entry_t; 2116#define AT7_NORESRC_RXID 0xffffffff 2117 2118 2119/* 2120 * Continue Target I/O Entry structure 2121 * Request from driver. The response from the 2122 * ISP firmware is the same except that the last 18 2123 * bytes are overwritten by suggested sense data if 2124 * the 'autosense valid' bit is set in the status byte. 2125 */ 2126typedef struct { 2127 isphdr_t ct_header; 2128 uint16_t ct_syshandle; 2129 uint16_t ct_fwhandle; /* required by f/w */ 2130 uint8_t ct_lun; /* lun */ 2131 uint8_t ct_iid; /* initiator id */ 2132 uint8_t ct_reserved2; 2133 uint8_t ct_tgt; /* our target id */ 2134 uint32_t ct_flags; 2135 uint8_t ct_status; /* isp status */ 2136 uint8_t ct_scsi_status; /* scsi status */ 2137 uint8_t ct_tag_val; /* tag value */ 2138 uint8_t ct_tag_type; /* tag type */ 2139 uint32_t ct_xfrlen; /* transfer length */ 2140 int32_t ct_resid; /* residual length */ 2141 uint16_t ct_timeout; 2142 uint16_t ct_seg_count; 2143 ispds_t ct_dataseg[ISP_RQDSEG]; 2144} ct_entry_t; 2145 2146/* 2147 * For some of the dual port SCSI adapters, port (bus #) is reported 2148 * in the MSbit of ct_iid. Bit fields are a bit too awkward here. 2149 * 2150 * Note that this does not apply to FC adapters at all which can and 2151 * do report IIDs between 0x81 && 0xfe (or 0x7ff) which represent devices 2152 * that have logged in across a SCSI fabric. 2153 */ 2154#define GET_IID_VAL(x) (x & 0x3f) 2155#define GET_BUS_VAL(x) ((x >> 7) & 0x1) 2156#define SET_IID_VAL(y, x) y = ((y & ~0x3f) | (x & 0x3f)) 2157#define SET_BUS_VAL(y, x) y = ((y & 0x3f) | ((x & 0x1) << 7)) 2158 2159/* 2160 * ct_flags values 2161 */ 2162#define CT_TQAE 0x00000002 /* bit 1, Tagged Queue Action enable */ 2163#define CT_DATA_IN 0x00000040 /* bits 6&7, Data direction */ 2164#define CT_DATA_OUT 0x00000080 /* bits 6&7, Data direction */ 2165#define CT_NO_DATA 0x000000C0 /* bits 6&7, Data direction */ 2166#define CT_CCINCR 0x00000100 /* bit 8, autoincrement atio count */ 2167#define CT_DATAMASK 0x000000C0 /* bits 6&7, Data direction */ 2168#define CT_INISYNCWIDE 0x00004000 /* bit 14, Do Sync/Wide Negotiation */ 2169#define CT_NODISC 0x00008000 /* bit 15, Disconnects disabled */ 2170#define CT_DSDP 0x01000000 /* bit 24, Disable Save Data Pointers */ 2171#define CT_SENDRDP 0x04000000 /* bit 26, Send Restore Pointers msg */ 2172#define CT_SENDSTATUS 0x80000000 /* bit 31, Send SCSI status byte */ 2173 2174/* 2175 * ct_status values 2176 * - set by the firmware when it returns the CTIO 2177 */ 2178#define CT_OK 0x01 /* completed without error */ 2179#define CT_ABORTED 0x02 /* aborted by host */ 2180#define CT_ERR 0x04 /* see sense data for error */ 2181#define CT_INVAL 0x06 /* request for disabled lun */ 2182#define CT_NOPATH 0x07 /* invalid ITL nexus */ 2183#define CT_INVRXID 0x08 /* (FC only) Invalid RX_ID */ 2184#define CT_DATA_OVER 0x09 /* (FC only) Data Overrun */ 2185#define CT_RSELTMO 0x0A /* reselection timeout after 2 tries */ 2186#define CT_TIMEOUT 0x0B /* timed out */ 2187#define CT_RESET 0x0E /* SCSI Bus Reset occurred */ 2188#define CT_PARITY 0x0F /* Uncorrectable Parity Error */ 2189#define CT_BUS_ERROR 0x10 /* (FC Only) DMA PCI Error */ 2190#define CT_PANIC 0x13 /* Unrecoverable Error */ 2191#define CT_PHASE_ERROR 0x14 /* Bus phase sequence error */ 2192#define CT_DATA_UNDER 0x15 /* (FC only) Data Underrun */ 2193#define CT_BDR_MSG 0x17 /* Bus Device Reset msg received */ 2194#define CT_TERMINATED 0x19 /* due to Terminate Transfer mbox cmd */ 2195#define CT_PORTUNAVAIL 0x28 /* port not available */ 2196#define CT_LOGOUT 0x29 /* port logout */ 2197#define CT_PORTCHANGED 0x2A /* port changed */ 2198#define CT_IDE 0x33 /* Initiator Detected Error */ 2199#define CT_NOACK 0x35 /* Outstanding Immed. Notify. entry */ 2200#define CT_SRR 0x45 /* SRR Received */ 2201#define CT_LUN_RESET 0x48 /* Lun Reset Received */ 2202 2203#define CT_HBA_RESET 0xffff /* pseudo error - command destroyed by HBA reset*/ 2204 2205/* 2206 * When the firmware returns a CTIO entry, it may overwrite the last 2207 * part of the structure with sense data. This starts at offset 0x2E 2208 * into the entry, which is in the middle of ct_dataseg[1]. Rather 2209 * than define a new struct for this, I'm just using the sense data 2210 * offset. 2211 */ 2212#define CTIO_SENSE_OFFSET 0x2E 2213 2214/* 2215 * Entry length in u_longs. All entries are the same size so 2216 * any one will do as the numerator. 2217 */ 2218#define UINT32_ENTRY_SIZE (sizeof(at_entry_t)/sizeof(uint32_t)) 2219 2220/* 2221 * QLA2100 CTIO (type 2) entry 2222 */ 2223#define MAXRESPLEN 26 2224typedef struct { 2225 isphdr_t ct_header; 2226 uint32_t ct_syshandle; 2227 uint8_t ct_lun; /* lun */ 2228 uint8_t ct_iid; /* initiator id */ 2229 uint16_t ct_rxid; /* response ID */ 2230 uint16_t ct_flags; 2231 uint16_t ct_status; /* isp status */ 2232 uint16_t ct_timeout; 2233 uint16_t ct_seg_count; 2234 uint32_t ct_reloff; /* relative offset */ 2235 int32_t ct_resid; /* residual length */ 2236 union { 2237 /* 2238 * The three different modes that the target driver 2239 * can set the CTIO{2,3,4} up as. 2240 * 2241 * The first is for sending FCP_DATA_IUs as well as 2242 * (optionally) sending a terminal SCSI status FCP_RSP_IU. 2243 * 2244 * The second is for sending SCSI sense data in an FCP_RSP_IU. 2245 * Note that no FCP_DATA_IUs will be sent. 2246 * 2247 * The third is for sending FCP_RSP_IUs as built specifically 2248 * in system memory as located by the isp_dataseg. 2249 */ 2250 struct { 2251 uint32_t _reserved; 2252 uint16_t _reserved2; 2253 uint16_t ct_scsi_status; 2254 uint32_t ct_xfrlen; 2255 union { 2256 ispds_t ct_dataseg[ISP_RQDSEG_T2]; 2257 ispds64_t ct_dataseg64[ISP_RQDSEG_T3]; 2258 ispdslist_t ct_dslist; 2259 } u; 2260 } m0; 2261 struct { 2262 uint16_t _reserved; 2263 uint16_t _reserved2; 2264 uint16_t ct_senselen; 2265 uint16_t ct_scsi_status; 2266 uint16_t ct_resplen; 2267 uint8_t ct_resp[MAXRESPLEN]; 2268 } m1; 2269 struct { 2270 uint32_t _reserved; 2271 uint16_t _reserved2; 2272 uint16_t _reserved3; 2273 uint32_t ct_datalen; 2274 ispds_t ct_fcp_rsp_iudata; 2275 } m2; 2276 } rsp; 2277} ct2_entry_t; 2278 2279typedef struct { 2280 isphdr_t ct_header; 2281 uint32_t ct_syshandle; 2282 uint16_t ct_iid; /* initiator id */ 2283 uint16_t ct_rxid; /* response ID */ 2284 uint16_t ct_flags; 2285 uint16_t ct_status; /* isp status */ 2286 uint16_t ct_timeout; 2287 uint16_t ct_seg_count; 2288 uint32_t ct_reloff; /* relative offset */ 2289 int32_t ct_resid; /* residual length */ 2290 union { 2291 struct { 2292 uint32_t _reserved; 2293 uint16_t _reserved2; 2294 uint16_t ct_scsi_status; 2295 uint32_t ct_xfrlen; 2296 union { 2297 ispds_t ct_dataseg[ISP_RQDSEG_T2]; 2298 ispds64_t ct_dataseg64[ISP_RQDSEG_T3]; 2299 ispdslist_t ct_dslist; 2300 } u; 2301 } m0; 2302 struct { 2303 uint16_t _reserved; 2304 uint16_t _reserved2; 2305 uint16_t ct_senselen; 2306 uint16_t ct_scsi_status; 2307 uint16_t ct_resplen; 2308 uint8_t ct_resp[MAXRESPLEN]; 2309 } m1; 2310 struct { 2311 uint32_t _reserved; 2312 uint16_t _reserved2; 2313 uint16_t _reserved3; 2314 uint32_t ct_datalen; 2315 ispds_t ct_fcp_rsp_iudata; 2316 } m2; 2317 } rsp; 2318} ct2e_entry_t; 2319 2320/* 2321 * ct_flags values for CTIO2 2322 */ 2323#define CT2_FLAG_MODE0 0x0000 2324#define CT2_FLAG_MODE1 0x0001 2325#define CT2_FLAG_MODE2 0x0002 2326#define CT2_FLAG_MMASK 0x0003 2327#define CT2_DATA_IN 0x0040 2328#define CT2_DATA_OUT 0x0080 2329#define CT2_NO_DATA 0x00C0 2330#define CT2_DATAMASK 0x00C0 2331#define CT2_CCINCR 0x0100 2332#define CT2_FASTPOST 0x0200 2333#define CT2_CONFIRM 0x2000 2334#define CT2_TERMINATE 0x4000 2335#define CT2_SENDSTATUS 0x8000 2336 2337/* 2338 * ct_status values are (mostly) the same as that for ct_entry. 2339 */ 2340 2341/* 2342 * ct_scsi_status values- the low 8 bits are the normal SCSI status 2343 * we know and love. The upper 8 bits are validity markers for FCP_RSP_IU 2344 * fields. 2345 */ 2346#define CT2_RSPLEN_VALID 0x0100 2347#define CT2_SNSLEN_VALID 0x0200 2348#define CT2_DATA_OVER 0x0400 2349#define CT2_DATA_UNDER 0x0800 2350 2351/* 2352 * ISP24XX CTIO 2353 */ 2354#define MAXRESPLEN_24XX 24 2355typedef struct { 2356 isphdr_t ct_header; 2357 uint32_t ct_syshandle; 2358 uint16_t ct_nphdl; /* status on returned CTIOs */ 2359 uint16_t ct_timeout; 2360 uint16_t ct_seg_count; 2361 uint8_t ct_vpidx; 2362 uint8_t ct_xflags; 2363 uint16_t ct_iid_lo; /* low 16 bits of portid */ 2364 uint8_t ct_iid_hi; /* hi 8 bits of portid */ 2365 uint8_t ct_reserved; 2366 uint32_t ct_rxid; 2367 uint16_t ct_senselen; /* mode 1 only */ 2368 uint16_t ct_flags; 2369 int32_t ct_resid; /* residual length */ 2370 uint16_t ct_oxid; 2371 uint16_t ct_scsi_status; /* modes 0 && 1 only */ 2372 union { 2373 struct { 2374 uint32_t reloff; 2375 uint32_t reserved0; 2376 uint32_t ct_xfrlen; 2377 uint32_t reserved1; 2378 ispds64_t ds; 2379 } m0; 2380 struct { 2381 uint16_t ct_resplen; 2382 uint16_t reserved; 2383 uint8_t ct_resp[MAXRESPLEN_24XX]; 2384 } m1; 2385 struct { 2386 uint32_t reserved0; 2387 uint32_t ct_datalen; 2388 uint32_t reserved1; 2389 ispds64_t ct_fcp_rsp_iudata; 2390 } m2; 2391 } rsp; 2392} ct7_entry_t; 2393 2394/* 2395 * ct_flags values for CTIO7 2396 */ 2397#define CT7_DATA_IN 0x0002 2398#define CT7_DATA_OUT 0x0001 2399#define CT7_NO_DATA 0x0000 2400#define CT7_DATAMASK 0x003 2401#define CT7_DSD_ENABLE 0x0004 2402#define CT7_CONF_STSFD 0x0010 2403#define CT7_EXPLCT_CONF 0x0020 2404#define CT7_FLAG_MODE0 0x0000 2405#define CT7_FLAG_MODE1 0x0040 2406#define CT7_FLAG_MODE2 0x0080 2407#define CT7_FLAG_MMASK 0x00C0 2408#define CT7_NOACK 0x0100 2409#define CT7_TASK_ATTR_SHIFT 9 2410#define CT7_CONFIRM 0x2000 2411#define CT7_TERMINATE 0x4000 2412#define CT7_SENDSTATUS 0x8000 2413 2414/* 2415 * Type 7 CTIO status codes 2416 */ 2417#define CT7_OK 0x01 /* completed without error */ 2418#define CT7_ABORTED 0x02 /* aborted by host */ 2419#define CT7_ERR 0x04 /* see sense data for error */ 2420#define CT7_INVAL 0x06 /* request for disabled lun */ 2421#define CT7_INVRXID 0x08 /* Invalid RX_ID */ 2422#define CT7_DATA_OVER 0x09 /* Data Overrun */ 2423#define CT7_TIMEOUT 0x0B /* timed out */ 2424#define CT7_RESET 0x0E /* LIP Rset Received */ 2425#define CT7_BUS_ERROR 0x10 /* DMA PCI Error */ 2426#define CT7_REASSY_ERR 0x11 /* DMA reassembly error */ 2427#define CT7_DATA_UNDER 0x15 /* Data Underrun */ 2428#define CT7_PORTUNAVAIL 0x28 /* port not available */ 2429#define CT7_LOGOUT 0x29 /* port logout */ 2430#define CT7_PORTCHANGED 0x2A /* port changed */ 2431#define CT7_SRR 0x45 /* SRR Received */ 2432 2433/* 2434 * Other 24XX related target IOCBs 2435 */ 2436 2437/* 2438 * ABTS Received 2439 */ 2440typedef struct { 2441 isphdr_t abts_header; 2442 uint8_t abts_reserved0[6]; 2443 uint16_t abts_nphdl; 2444 uint16_t abts_reserved1; 2445 uint16_t abts_sof; 2446 uint32_t abts_rxid_abts; 2447 uint16_t abts_did_lo; 2448 uint8_t abts_did_hi; 2449 uint8_t abts_r_ctl; 2450 uint16_t abts_sid_lo; 2451 uint8_t abts_sid_hi; 2452 uint8_t abts_cs_ctl; 2453 uint16_t abts_fs_ctl; 2454 uint8_t abts_f_ctl; 2455 uint8_t abts_type; 2456 uint16_t abts_seq_cnt; 2457 uint8_t abts_df_ctl; 2458 uint8_t abts_seq_id; 2459 uint16_t abts_rx_id; 2460 uint16_t abts_ox_id; 2461 uint32_t abts_param; 2462 uint8_t abts_reserved2[16]; 2463 uint32_t abts_rxid_task; 2464} abts_t; 2465 2466typedef struct { 2467 isphdr_t abts_rsp_header; 2468 uint32_t abts_rsp_handle; 2469 uint16_t abts_rsp_status; 2470 uint16_t abts_rsp_nphdl; 2471 uint16_t abts_rsp_ctl_flags; 2472 uint16_t abts_rsp_sof; 2473 uint32_t abts_rsp_rxid_abts; 2474 uint16_t abts_rsp_did_lo; 2475 uint8_t abts_rsp_did_hi; 2476 uint8_t abts_rsp_r_ctl; 2477 uint16_t abts_rsp_sid_lo; 2478 uint8_t abts_rsp_sid_hi; 2479 uint8_t abts_rsp_cs_ctl; 2480 uint16_t abts_rsp_f_ctl_lo; 2481 uint8_t abts_rsp_f_ctl_hi; 2482 uint8_t abts_rsp_type; 2483 uint16_t abts_rsp_seq_cnt; 2484 uint8_t abts_rsp_df_ctl; 2485 uint8_t abts_rsp_seq_id; 2486 uint16_t abts_rsp_rx_id; 2487 uint16_t abts_rsp_ox_id; 2488 uint32_t abts_rsp_param; 2489 union { 2490 struct { 2491 uint16_t reserved; 2492 uint8_t last_seq_id; 2493 uint8_t seq_id_valid; 2494 uint16_t aborted_rx_id; 2495 uint16_t aborted_ox_id; 2496 uint16_t high_seq_cnt; 2497 uint16_t low_seq_cnt; 2498 uint8_t reserved2[4]; 2499 } ba_acc; 2500 struct { 2501 uint8_t vendor_unique; 2502 uint8_t explanation; 2503 uint8_t reason; 2504 uint8_t reserved; 2505 uint8_t reserved2[12]; 2506 } ba_rjt; 2507 struct { 2508 uint8_t reserved[8]; 2509 uint32_t subcode1; 2510 uint32_t subcode2; 2511 } rsp; 2512 uint8_t reserved[16]; 2513 } abts_rsp_payload; 2514 uint32_t abts_rsp_rxid_task; 2515} abts_rsp_t; 2516 2517/* terminate this ABTS exchange */ 2518#define ISP24XX_ABTS_RSP_TERMINATE 0x01 2519 2520#define ISP24XX_ABTS_RSP_COMPLETE 0x00 2521#define ISP24XX_ABTS_RSP_RESET 0x04 2522#define ISP24XX_ABTS_RSP_ABORTED 0x05 2523#define ISP24XX_ABTS_RSP_TIMEOUT 0x06 2524#define ISP24XX_ABTS_RSP_INVXID 0x08 2525#define ISP24XX_ABTS_RSP_LOGOUT 0x29 2526#define ISP24XX_ABTS_RSP_SUBCODE 0x31 2527 2528#define ISP24XX_NO_TASK 0xffffffff 2529 2530/* 2531 * Miscellaneous 2532 * 2533 * These are the limits of the number of dma segments we 2534 * can deal with based not on the size of the segment counter 2535 * (which is 16 bits), but on the size of the number of 2536 * queue entries field (which is 8 bits). We assume no 2537 * segments in the first queue entry, so we can either 2538 * have 7 dma segments per continuation entry or 5 2539 * (for 64 bit dma).. multiplying out by 254.... 2540 */ 2541#define ISP_NSEG_MAX 1778 2542#define ISP_NSEG64_MAX 1270 2543 |
|
1412#endif /* _ISPMBOX_H */ | 2544#endif /* _ISPMBOX_H */ |