1/* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21/* 22 * Copyright 2008 Sun Microsystems, Inc. All rights reserved. 23 * Use is subject to license terms. 24 */ 25 26#ifndef _SYS_ZAP_H 27#define _SYS_ZAP_H 28 29#pragma ident "%Z%%M% %I% %E% SMI" 30 31/* 32 * ZAP - ZFS Attribute Processor 33 * 34 * The ZAP is a module which sits on top of the DMU (Data Management 35 * Unit) and implements a higher-level storage primitive using DMU 36 * objects. Its primary consumer is the ZPL (ZFS Posix Layer). 37 * 38 * A "zapobj" is a DMU object which the ZAP uses to stores attributes. 39 * Users should use only zap routines to access a zapobj - they should 40 * not access the DMU object directly using DMU routines. 41 * 42 * The attributes stored in a zapobj are name-value pairs. The name is 43 * a zero-terminated string of up to ZAP_MAXNAMELEN bytes (including 44 * terminating NULL). The value is an array of integers, which may be 45 * 1, 2, 4, or 8 bytes long. The total space used by the array (number 46 * of integers * integer length) can be up to ZAP_MAXVALUELEN bytes. 47 * Note that an 8-byte integer value can be used to store the location 48 * (object number) of another dmu object (which may be itself a zapobj). 49 * Note that you can use a zero-length attribute to store a single bit 50 * of information - the attribute is present or not. 51 * 52 * The ZAP routines are thread-safe. However, you must observe the 53 * DMU's restriction that a transaction may not be operated on 54 * concurrently. 55 * 56 * Any of the routines that return an int may return an I/O error (EIO 57 * or ECHECKSUM). 58 * 59 * 60 * Implementation / Performance Notes: 61 * 62 * The ZAP is intended to operate most efficiently on attributes with 63 * short (49 bytes or less) names and single 8-byte values, for which 64 * the microzap will be used. The ZAP should be efficient enough so 65 * that the user does not need to cache these attributes. 66 * 67 * The ZAP's locking scheme makes its routines thread-safe. Operations 68 * on different zapobjs will be processed concurrently. Operations on 69 * the same zapobj which only read data will be processed concurrently. 70 * Operations on the same zapobj which modify data will be processed 71 * concurrently when there are many attributes in the zapobj (because 72 * the ZAP uses per-block locking - more than 128 * (number of cpus) 73 * small attributes will suffice). 74 */ 75 76/* 77 * We're using zero-terminated byte strings (ie. ASCII or UTF-8 C 78 * strings) for the names of attributes, rather than a byte string 79 * bounded by an explicit length. If some day we want to support names 80 * in character sets which have embedded zeros (eg. UTF-16, UTF-32), 81 * we'll have to add routines for using length-bounded strings. 82 */ 83 84#include <sys/dmu.h> 85 86#ifdef __cplusplus 87extern "C" { 88#endif 89 90#define ZAP_MAXNAMELEN 256 91#define ZAP_MAXVALUELEN 1024 92 93/* 94 * The matchtype specifies which entry will be accessed. 95 * MT_EXACT: only find an exact match (non-normalized) 96 * MT_FIRST: find the "first" normalized (case and Unicode 97 * form) match; the designated "first" match will not change as long 98 * as the set of entries with this normalization doesn't change 99 * MT_BEST: if there is an exact match, find that, otherwise find the 100 * first normalized match 101 */ 102typedef enum matchtype 103{ 104 MT_EXACT, 105 MT_BEST, 106 MT_FIRST 107} matchtype_t; 108 109/* 110 * Create a new zapobj with no attributes and return its object number. 111 * MT_EXACT will cause the zap object to only support MT_EXACT lookups, 112 * otherwise any matchtype can be used for lookups. 113 * 114 * normflags specifies what normalization will be done. values are: 115 * 0: no normalization (legacy on-disk format, supports MT_EXACT matching 116 * only) 117 * U8_TEXTPREP_TOLOWER: case normalization will be performed. 118 * MT_FIRST/MT_BEST matching will find entries that match without 119 * regard to case (eg. looking for "foo" can find an entry "Foo"). 120 * Eventually, other flags will permit unicode normalization as well. 121 */ 122uint64_t zap_create(objset_t *ds, dmu_object_type_t ot, 123 dmu_object_type_t bonustype, int bonuslen, dmu_tx_t *tx); 124uint64_t zap_create_norm(objset_t *ds, int normflags, dmu_object_type_t ot, 125 dmu_object_type_t bonustype, int bonuslen, dmu_tx_t *tx); 126 127/* 128 * Create a new zapobj with no attributes from the given (unallocated) 129 * object number. 130 */ 131int zap_create_claim(objset_t *ds, uint64_t obj, dmu_object_type_t ot, 132 dmu_object_type_t bonustype, int bonuslen, dmu_tx_t *tx); 133int zap_create_claim_norm(objset_t *ds, uint64_t obj, 134 int normflags, dmu_object_type_t ot, 135 dmu_object_type_t bonustype, int bonuslen, dmu_tx_t *tx); 136 137/* 138 * The zapobj passed in must be a valid ZAP object for all of the 139 * following routines. 140 */ 141 142/* 143 * Destroy this zapobj and all its attributes. 144 * 145 * Frees the object number using dmu_object_free. 146 */ 147int zap_destroy(objset_t *ds, uint64_t zapobj, dmu_tx_t *tx); 148 149/* 150 * Manipulate attributes. 151 * 152 * 'integer_size' is in bytes, and must be 1, 2, 4, or 8. 153 */ 154 155/* 156 * Retrieve the contents of the attribute with the given name. 157 * 158 * If the requested attribute does not exist, the call will fail and 159 * return ENOENT. 160 * 161 * If 'integer_size' is smaller than the attribute's integer size, the 162 * call will fail and return EINVAL. 163 * 164 * If 'integer_size' is equal to or larger than the attribute's integer 165 * size, the call will succeed and return 0. * When converting to a 166 * larger integer size, the integers will be treated as unsigned (ie. no 167 * sign-extension will be performed). 168 * 169 * 'num_integers' is the length (in integers) of 'buf'. 170 * 171 * If the attribute is longer than the buffer, as many integers as will 172 * fit will be transferred to 'buf'. If the entire attribute was not 173 * transferred, the call will return EOVERFLOW. 174 * 175 * If rn_len is nonzero, realname will be set to the name of the found 176 * entry (which may be different from the requested name if matchtype is 177 * not MT_EXACT). 178 * 179 * If normalization_conflictp is not NULL, it will be set if there is 180 * another name with the same case/unicode normalized form. 181 */ 182int zap_lookup(objset_t *ds, uint64_t zapobj, const char *name, 183 uint64_t integer_size, uint64_t num_integers, void *buf); 184int zap_lookup_norm(objset_t *ds, uint64_t zapobj, const char *name, 185 uint64_t integer_size, uint64_t num_integers, void *buf, 186 matchtype_t mt, char *realname, int rn_len, 187 boolean_t *normalization_conflictp); 188
| 1/* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21/* 22 * Copyright 2008 Sun Microsystems, Inc. All rights reserved. 23 * Use is subject to license terms. 24 */ 25 26#ifndef _SYS_ZAP_H 27#define _SYS_ZAP_H 28 29#pragma ident "%Z%%M% %I% %E% SMI" 30 31/* 32 * ZAP - ZFS Attribute Processor 33 * 34 * The ZAP is a module which sits on top of the DMU (Data Management 35 * Unit) and implements a higher-level storage primitive using DMU 36 * objects. Its primary consumer is the ZPL (ZFS Posix Layer). 37 * 38 * A "zapobj" is a DMU object which the ZAP uses to stores attributes. 39 * Users should use only zap routines to access a zapobj - they should 40 * not access the DMU object directly using DMU routines. 41 * 42 * The attributes stored in a zapobj are name-value pairs. The name is 43 * a zero-terminated string of up to ZAP_MAXNAMELEN bytes (including 44 * terminating NULL). The value is an array of integers, which may be 45 * 1, 2, 4, or 8 bytes long. The total space used by the array (number 46 * of integers * integer length) can be up to ZAP_MAXVALUELEN bytes. 47 * Note that an 8-byte integer value can be used to store the location 48 * (object number) of another dmu object (which may be itself a zapobj). 49 * Note that you can use a zero-length attribute to store a single bit 50 * of information - the attribute is present or not. 51 * 52 * The ZAP routines are thread-safe. However, you must observe the 53 * DMU's restriction that a transaction may not be operated on 54 * concurrently. 55 * 56 * Any of the routines that return an int may return an I/O error (EIO 57 * or ECHECKSUM). 58 * 59 * 60 * Implementation / Performance Notes: 61 * 62 * The ZAP is intended to operate most efficiently on attributes with 63 * short (49 bytes or less) names and single 8-byte values, for which 64 * the microzap will be used. The ZAP should be efficient enough so 65 * that the user does not need to cache these attributes. 66 * 67 * The ZAP's locking scheme makes its routines thread-safe. Operations 68 * on different zapobjs will be processed concurrently. Operations on 69 * the same zapobj which only read data will be processed concurrently. 70 * Operations on the same zapobj which modify data will be processed 71 * concurrently when there are many attributes in the zapobj (because 72 * the ZAP uses per-block locking - more than 128 * (number of cpus) 73 * small attributes will suffice). 74 */ 75 76/* 77 * We're using zero-terminated byte strings (ie. ASCII or UTF-8 C 78 * strings) for the names of attributes, rather than a byte string 79 * bounded by an explicit length. If some day we want to support names 80 * in character sets which have embedded zeros (eg. UTF-16, UTF-32), 81 * we'll have to add routines for using length-bounded strings. 82 */ 83 84#include <sys/dmu.h> 85 86#ifdef __cplusplus 87extern "C" { 88#endif 89 90#define ZAP_MAXNAMELEN 256 91#define ZAP_MAXVALUELEN 1024 92 93/* 94 * The matchtype specifies which entry will be accessed. 95 * MT_EXACT: only find an exact match (non-normalized) 96 * MT_FIRST: find the "first" normalized (case and Unicode 97 * form) match; the designated "first" match will not change as long 98 * as the set of entries with this normalization doesn't change 99 * MT_BEST: if there is an exact match, find that, otherwise find the 100 * first normalized match 101 */ 102typedef enum matchtype 103{ 104 MT_EXACT, 105 MT_BEST, 106 MT_FIRST 107} matchtype_t; 108 109/* 110 * Create a new zapobj with no attributes and return its object number. 111 * MT_EXACT will cause the zap object to only support MT_EXACT lookups, 112 * otherwise any matchtype can be used for lookups. 113 * 114 * normflags specifies what normalization will be done. values are: 115 * 0: no normalization (legacy on-disk format, supports MT_EXACT matching 116 * only) 117 * U8_TEXTPREP_TOLOWER: case normalization will be performed. 118 * MT_FIRST/MT_BEST matching will find entries that match without 119 * regard to case (eg. looking for "foo" can find an entry "Foo"). 120 * Eventually, other flags will permit unicode normalization as well. 121 */ 122uint64_t zap_create(objset_t *ds, dmu_object_type_t ot, 123 dmu_object_type_t bonustype, int bonuslen, dmu_tx_t *tx); 124uint64_t zap_create_norm(objset_t *ds, int normflags, dmu_object_type_t ot, 125 dmu_object_type_t bonustype, int bonuslen, dmu_tx_t *tx); 126 127/* 128 * Create a new zapobj with no attributes from the given (unallocated) 129 * object number. 130 */ 131int zap_create_claim(objset_t *ds, uint64_t obj, dmu_object_type_t ot, 132 dmu_object_type_t bonustype, int bonuslen, dmu_tx_t *tx); 133int zap_create_claim_norm(objset_t *ds, uint64_t obj, 134 int normflags, dmu_object_type_t ot, 135 dmu_object_type_t bonustype, int bonuslen, dmu_tx_t *tx); 136 137/* 138 * The zapobj passed in must be a valid ZAP object for all of the 139 * following routines. 140 */ 141 142/* 143 * Destroy this zapobj and all its attributes. 144 * 145 * Frees the object number using dmu_object_free. 146 */ 147int zap_destroy(objset_t *ds, uint64_t zapobj, dmu_tx_t *tx); 148 149/* 150 * Manipulate attributes. 151 * 152 * 'integer_size' is in bytes, and must be 1, 2, 4, or 8. 153 */ 154 155/* 156 * Retrieve the contents of the attribute with the given name. 157 * 158 * If the requested attribute does not exist, the call will fail and 159 * return ENOENT. 160 * 161 * If 'integer_size' is smaller than the attribute's integer size, the 162 * call will fail and return EINVAL. 163 * 164 * If 'integer_size' is equal to or larger than the attribute's integer 165 * size, the call will succeed and return 0. * When converting to a 166 * larger integer size, the integers will be treated as unsigned (ie. no 167 * sign-extension will be performed). 168 * 169 * 'num_integers' is the length (in integers) of 'buf'. 170 * 171 * If the attribute is longer than the buffer, as many integers as will 172 * fit will be transferred to 'buf'. If the entire attribute was not 173 * transferred, the call will return EOVERFLOW. 174 * 175 * If rn_len is nonzero, realname will be set to the name of the found 176 * entry (which may be different from the requested name if matchtype is 177 * not MT_EXACT). 178 * 179 * If normalization_conflictp is not NULL, it will be set if there is 180 * another name with the same case/unicode normalized form. 181 */ 182int zap_lookup(objset_t *ds, uint64_t zapobj, const char *name, 183 uint64_t integer_size, uint64_t num_integers, void *buf); 184int zap_lookup_norm(objset_t *ds, uint64_t zapobj, const char *name, 185 uint64_t integer_size, uint64_t num_integers, void *buf, 186 matchtype_t mt, char *realname, int rn_len, 187 boolean_t *normalization_conflictp); 188
|
189/* 190 * Create an attribute with the given name and value. 191 * 192 * If an attribute with the given name already exists, the call will 193 * fail and return EEXIST. 194 */ 195int zap_add(objset_t *ds, uint64_t zapobj, const char *name, 196 int integer_size, uint64_t num_integers, 197 const void *val, dmu_tx_t *tx); 198 199/* 200 * Set the attribute with the given name to the given value. If an 201 * attribute with the given name does not exist, it will be created. If 202 * an attribute with the given name already exists, the previous value 203 * will be overwritten. The integer_size may be different from the 204 * existing attribute's integer size, in which case the attribute's 205 * integer size will be updated to the new value. 206 */ 207int zap_update(objset_t *ds, uint64_t zapobj, const char *name, 208 int integer_size, uint64_t num_integers, const void *val, dmu_tx_t *tx); 209 210/* 211 * Get the length (in integers) and the integer size of the specified 212 * attribute. 213 * 214 * If the requested attribute does not exist, the call will fail and 215 * return ENOENT. 216 */ 217int zap_length(objset_t *ds, uint64_t zapobj, const char *name, 218 uint64_t *integer_size, uint64_t *num_integers); 219 220/* 221 * Remove the specified attribute. 222 * 223 * If the specified attribute does not exist, the call will fail and 224 * return ENOENT. 225 */ 226int zap_remove(objset_t *ds, uint64_t zapobj, const char *name, dmu_tx_t *tx); 227int zap_remove_norm(objset_t *ds, uint64_t zapobj, const char *name, 228 matchtype_t mt, dmu_tx_t *tx); 229 230/* 231 * Returns (in *count) the number of attributes in the specified zap 232 * object. 233 */ 234int zap_count(objset_t *ds, uint64_t zapobj, uint64_t *count); 235 236 237/* 238 * Returns (in name) the name of the entry whose (value & mask) 239 * (za_first_integer) is value, or ENOENT if not found. The string 240 * pointed to by name must be at least 256 bytes long. If mask==0, the 241 * match must be exact (ie, same as mask=-1ULL). 242 */ 243int zap_value_search(objset_t *os, uint64_t zapobj, 244 uint64_t value, uint64_t mask, char *name); 245 246/* 247 * Transfer all the entries from fromobj into intoobj. Only works on 248 * int_size=8 num_integers=1 values. Fails if there are any duplicated 249 * entries. 250 */ 251int zap_join(objset_t *os, uint64_t fromobj, uint64_t intoobj, dmu_tx_t *tx); 252 253/* 254 * Manipulate entries where the name + value are the "same" (the name is 255 * a stringified version of the value). 256 */ 257int zap_add_int(objset_t *os, uint64_t obj, uint64_t value, dmu_tx_t *tx); 258int zap_remove_int(objset_t *os, uint64_t obj, uint64_t value, dmu_tx_t *tx); 259int zap_lookup_int(objset_t *os, uint64_t obj, uint64_t value); 260 261struct zap; 262struct zap_leaf; 263typedef struct zap_cursor { 264 /* This structure is opaque! */ 265 objset_t *zc_objset; 266 struct zap *zc_zap; 267 struct zap_leaf *zc_leaf; 268 uint64_t zc_zapobj; 269 uint64_t zc_hash; 270 uint32_t zc_cd; 271} zap_cursor_t; 272 273typedef struct { 274 int za_integer_length; 275 /* 276 * za_normalization_conflict will be set if there are additional 277 * entries with this normalized form (eg, "foo" and "Foo"). 278 */ 279 boolean_t za_normalization_conflict; 280 uint64_t za_num_integers; 281 uint64_t za_first_integer; /* no sign extension for <8byte ints */ 282 char za_name[MAXNAMELEN]; 283} zap_attribute_t; 284 285/* 286 * The interface for listing all the attributes of a zapobj can be 287 * thought of as cursor moving down a list of the attributes one by 288 * one. The cookie returned by the zap_cursor_serialize routine is 289 * persistent across system calls (and across reboot, even). 290 */ 291 292/* 293 * Initialize a zap cursor, pointing to the "first" attribute of the 294 * zapobj. You must _fini the cursor when you are done with it. 295 */ 296void zap_cursor_init(zap_cursor_t *zc, objset_t *ds, uint64_t zapobj); 297void zap_cursor_fini(zap_cursor_t *zc); 298 299/* 300 * Get the attribute currently pointed to by the cursor. Returns 301 * ENOENT if at the end of the attributes. 302 */ 303int zap_cursor_retrieve(zap_cursor_t *zc, zap_attribute_t *za); 304 305/* 306 * Advance the cursor to the next attribute. 307 */ 308void zap_cursor_advance(zap_cursor_t *zc); 309 310/* 311 * Get a persistent cookie pointing to the current position of the zap 312 * cursor. The low 4 bits in the cookie are always zero, and thus can 313 * be used as to differentiate a serialized cookie from a different type 314 * of value. The cookie will be less than 2^32 as long as there are 315 * fewer than 2^22 (4.2 million) entries in the zap object. 316 */ 317uint64_t zap_cursor_serialize(zap_cursor_t *zc); 318 319/* 320 * Initialize a zap cursor pointing to the position recorded by 321 * zap_cursor_serialize (in the "serialized" argument). You can also 322 * use a "serialized" argument of 0 to start at the beginning of the 323 * zapobj (ie. zap_cursor_init_serialized(..., 0) is equivalent to 324 * zap_cursor_init(...).) 325 */ 326void zap_cursor_init_serialized(zap_cursor_t *zc, objset_t *ds, 327 uint64_t zapobj, uint64_t serialized); 328 329 330#define ZAP_HISTOGRAM_SIZE 10 331 332typedef struct zap_stats { 333 /* 334 * Size of the pointer table (in number of entries). 335 * This is always a power of 2, or zero if it's a microzap. 336 * In general, it should be considerably greater than zs_num_leafs. 337 */ 338 uint64_t zs_ptrtbl_len; 339 340 uint64_t zs_blocksize; /* size of zap blocks */ 341 342 /* 343 * The number of blocks used. Note that some blocks may be 344 * wasted because old ptrtbl's and large name/value blocks are 345 * not reused. (Although their space is reclaimed, we don't 346 * reuse those offsets in the object.) 347 */ 348 uint64_t zs_num_blocks; 349 350 /* 351 * Pointer table values from zap_ptrtbl in the zap_phys_t 352 */ 353 uint64_t zs_ptrtbl_nextblk; /* next (larger) copy start block */ 354 uint64_t zs_ptrtbl_blks_copied; /* number source blocks copied */ 355 uint64_t zs_ptrtbl_zt_blk; /* starting block number */ 356 uint64_t zs_ptrtbl_zt_numblks; /* number of blocks */ 357 uint64_t zs_ptrtbl_zt_shift; /* bits to index it */ 358 359 /* 360 * Values of the other members of the zap_phys_t 361 */ 362 uint64_t zs_block_type; /* ZBT_HEADER */ 363 uint64_t zs_magic; /* ZAP_MAGIC */ 364 uint64_t zs_num_leafs; /* The number of leaf blocks */ 365 uint64_t zs_num_entries; /* The number of zap entries */ 366 uint64_t zs_salt; /* salt to stir into hash function */ 367 368 /* 369 * Histograms. For all histograms, the last index 370 * (ZAP_HISTOGRAM_SIZE-1) includes any values which are greater 371 * than what can be represented. For example 372 * zs_leafs_with_n5_entries[ZAP_HISTOGRAM_SIZE-1] is the number 373 * of leafs with more than 45 entries. 374 */ 375 376 /* 377 * zs_leafs_with_n_pointers[n] is the number of leafs with 378 * 2^n pointers to it. 379 */ 380 uint64_t zs_leafs_with_2n_pointers[ZAP_HISTOGRAM_SIZE]; 381 382 /* 383 * zs_leafs_with_n_entries[n] is the number of leafs with 384 * [n*5, (n+1)*5) entries. In the current implementation, there 385 * can be at most 55 entries in any block, but there may be 386 * fewer if the name or value is large, or the block is not 387 * completely full. 388 */ 389 uint64_t zs_blocks_with_n5_entries[ZAP_HISTOGRAM_SIZE]; 390 391 /* 392 * zs_leafs_n_tenths_full[n] is the number of leafs whose 393 * fullness is in the range [n/10, (n+1)/10). 394 */ 395 uint64_t zs_blocks_n_tenths_full[ZAP_HISTOGRAM_SIZE]; 396 397 /* 398 * zs_entries_using_n_chunks[n] is the number of entries which 399 * consume n 24-byte chunks. (Note, large names/values only use 400 * one chunk, but contribute to zs_num_blocks_large.) 401 */ 402 uint64_t zs_entries_using_n_chunks[ZAP_HISTOGRAM_SIZE]; 403 404 /* 405 * zs_buckets_with_n_entries[n] is the number of buckets (each 406 * leaf has 64 buckets) with n entries. 407 * zs_buckets_with_n_entries[1] should be very close to 408 * zs_num_entries. 409 */ 410 uint64_t zs_buckets_with_n_entries[ZAP_HISTOGRAM_SIZE]; 411} zap_stats_t; 412 413/* 414 * Get statistics about a ZAP object. Note: you need to be aware of the 415 * internal implementation of the ZAP to correctly interpret some of the 416 * statistics. This interface shouldn't be relied on unless you really 417 * know what you're doing. 418 */ 419int zap_get_stats(objset_t *ds, uint64_t zapobj, zap_stats_t *zs); 420 421#ifdef __cplusplus 422} 423#endif 424 425#endif /* _SYS_ZAP_H */
| 192/* 193 * Create an attribute with the given name and value. 194 * 195 * If an attribute with the given name already exists, the call will 196 * fail and return EEXIST. 197 */ 198int zap_add(objset_t *ds, uint64_t zapobj, const char *name, 199 int integer_size, uint64_t num_integers, 200 const void *val, dmu_tx_t *tx); 201 202/* 203 * Set the attribute with the given name to the given value. If an 204 * attribute with the given name does not exist, it will be created. If 205 * an attribute with the given name already exists, the previous value 206 * will be overwritten. The integer_size may be different from the 207 * existing attribute's integer size, in which case the attribute's 208 * integer size will be updated to the new value. 209 */ 210int zap_update(objset_t *ds, uint64_t zapobj, const char *name, 211 int integer_size, uint64_t num_integers, const void *val, dmu_tx_t *tx); 212 213/* 214 * Get the length (in integers) and the integer size of the specified 215 * attribute. 216 * 217 * If the requested attribute does not exist, the call will fail and 218 * return ENOENT. 219 */ 220int zap_length(objset_t *ds, uint64_t zapobj, const char *name, 221 uint64_t *integer_size, uint64_t *num_integers); 222 223/* 224 * Remove the specified attribute. 225 * 226 * If the specified attribute does not exist, the call will fail and 227 * return ENOENT. 228 */ 229int zap_remove(objset_t *ds, uint64_t zapobj, const char *name, dmu_tx_t *tx); 230int zap_remove_norm(objset_t *ds, uint64_t zapobj, const char *name, 231 matchtype_t mt, dmu_tx_t *tx); 232 233/* 234 * Returns (in *count) the number of attributes in the specified zap 235 * object. 236 */ 237int zap_count(objset_t *ds, uint64_t zapobj, uint64_t *count); 238 239 240/* 241 * Returns (in name) the name of the entry whose (value & mask) 242 * (za_first_integer) is value, or ENOENT if not found. The string 243 * pointed to by name must be at least 256 bytes long. If mask==0, the 244 * match must be exact (ie, same as mask=-1ULL). 245 */ 246int zap_value_search(objset_t *os, uint64_t zapobj, 247 uint64_t value, uint64_t mask, char *name); 248 249/* 250 * Transfer all the entries from fromobj into intoobj. Only works on 251 * int_size=8 num_integers=1 values. Fails if there are any duplicated 252 * entries. 253 */ 254int zap_join(objset_t *os, uint64_t fromobj, uint64_t intoobj, dmu_tx_t *tx); 255 256/* 257 * Manipulate entries where the name + value are the "same" (the name is 258 * a stringified version of the value). 259 */ 260int zap_add_int(objset_t *os, uint64_t obj, uint64_t value, dmu_tx_t *tx); 261int zap_remove_int(objset_t *os, uint64_t obj, uint64_t value, dmu_tx_t *tx); 262int zap_lookup_int(objset_t *os, uint64_t obj, uint64_t value); 263 264struct zap; 265struct zap_leaf; 266typedef struct zap_cursor { 267 /* This structure is opaque! */ 268 objset_t *zc_objset; 269 struct zap *zc_zap; 270 struct zap_leaf *zc_leaf; 271 uint64_t zc_zapobj; 272 uint64_t zc_hash; 273 uint32_t zc_cd; 274} zap_cursor_t; 275 276typedef struct { 277 int za_integer_length; 278 /* 279 * za_normalization_conflict will be set if there are additional 280 * entries with this normalized form (eg, "foo" and "Foo"). 281 */ 282 boolean_t za_normalization_conflict; 283 uint64_t za_num_integers; 284 uint64_t za_first_integer; /* no sign extension for <8byte ints */ 285 char za_name[MAXNAMELEN]; 286} zap_attribute_t; 287 288/* 289 * The interface for listing all the attributes of a zapobj can be 290 * thought of as cursor moving down a list of the attributes one by 291 * one. The cookie returned by the zap_cursor_serialize routine is 292 * persistent across system calls (and across reboot, even). 293 */ 294 295/* 296 * Initialize a zap cursor, pointing to the "first" attribute of the 297 * zapobj. You must _fini the cursor when you are done with it. 298 */ 299void zap_cursor_init(zap_cursor_t *zc, objset_t *ds, uint64_t zapobj); 300void zap_cursor_fini(zap_cursor_t *zc); 301 302/* 303 * Get the attribute currently pointed to by the cursor. Returns 304 * ENOENT if at the end of the attributes. 305 */ 306int zap_cursor_retrieve(zap_cursor_t *zc, zap_attribute_t *za); 307 308/* 309 * Advance the cursor to the next attribute. 310 */ 311void zap_cursor_advance(zap_cursor_t *zc); 312 313/* 314 * Get a persistent cookie pointing to the current position of the zap 315 * cursor. The low 4 bits in the cookie are always zero, and thus can 316 * be used as to differentiate a serialized cookie from a different type 317 * of value. The cookie will be less than 2^32 as long as there are 318 * fewer than 2^22 (4.2 million) entries in the zap object. 319 */ 320uint64_t zap_cursor_serialize(zap_cursor_t *zc); 321 322/* 323 * Initialize a zap cursor pointing to the position recorded by 324 * zap_cursor_serialize (in the "serialized" argument). You can also 325 * use a "serialized" argument of 0 to start at the beginning of the 326 * zapobj (ie. zap_cursor_init_serialized(..., 0) is equivalent to 327 * zap_cursor_init(...).) 328 */ 329void zap_cursor_init_serialized(zap_cursor_t *zc, objset_t *ds, 330 uint64_t zapobj, uint64_t serialized); 331 332 333#define ZAP_HISTOGRAM_SIZE 10 334 335typedef struct zap_stats { 336 /* 337 * Size of the pointer table (in number of entries). 338 * This is always a power of 2, or zero if it's a microzap. 339 * In general, it should be considerably greater than zs_num_leafs. 340 */ 341 uint64_t zs_ptrtbl_len; 342 343 uint64_t zs_blocksize; /* size of zap blocks */ 344 345 /* 346 * The number of blocks used. Note that some blocks may be 347 * wasted because old ptrtbl's and large name/value blocks are 348 * not reused. (Although their space is reclaimed, we don't 349 * reuse those offsets in the object.) 350 */ 351 uint64_t zs_num_blocks; 352 353 /* 354 * Pointer table values from zap_ptrtbl in the zap_phys_t 355 */ 356 uint64_t zs_ptrtbl_nextblk; /* next (larger) copy start block */ 357 uint64_t zs_ptrtbl_blks_copied; /* number source blocks copied */ 358 uint64_t zs_ptrtbl_zt_blk; /* starting block number */ 359 uint64_t zs_ptrtbl_zt_numblks; /* number of blocks */ 360 uint64_t zs_ptrtbl_zt_shift; /* bits to index it */ 361 362 /* 363 * Values of the other members of the zap_phys_t 364 */ 365 uint64_t zs_block_type; /* ZBT_HEADER */ 366 uint64_t zs_magic; /* ZAP_MAGIC */ 367 uint64_t zs_num_leafs; /* The number of leaf blocks */ 368 uint64_t zs_num_entries; /* The number of zap entries */ 369 uint64_t zs_salt; /* salt to stir into hash function */ 370 371 /* 372 * Histograms. For all histograms, the last index 373 * (ZAP_HISTOGRAM_SIZE-1) includes any values which are greater 374 * than what can be represented. For example 375 * zs_leafs_with_n5_entries[ZAP_HISTOGRAM_SIZE-1] is the number 376 * of leafs with more than 45 entries. 377 */ 378 379 /* 380 * zs_leafs_with_n_pointers[n] is the number of leafs with 381 * 2^n pointers to it. 382 */ 383 uint64_t zs_leafs_with_2n_pointers[ZAP_HISTOGRAM_SIZE]; 384 385 /* 386 * zs_leafs_with_n_entries[n] is the number of leafs with 387 * [n*5, (n+1)*5) entries. In the current implementation, there 388 * can be at most 55 entries in any block, but there may be 389 * fewer if the name or value is large, or the block is not 390 * completely full. 391 */ 392 uint64_t zs_blocks_with_n5_entries[ZAP_HISTOGRAM_SIZE]; 393 394 /* 395 * zs_leafs_n_tenths_full[n] is the number of leafs whose 396 * fullness is in the range [n/10, (n+1)/10). 397 */ 398 uint64_t zs_blocks_n_tenths_full[ZAP_HISTOGRAM_SIZE]; 399 400 /* 401 * zs_entries_using_n_chunks[n] is the number of entries which 402 * consume n 24-byte chunks. (Note, large names/values only use 403 * one chunk, but contribute to zs_num_blocks_large.) 404 */ 405 uint64_t zs_entries_using_n_chunks[ZAP_HISTOGRAM_SIZE]; 406 407 /* 408 * zs_buckets_with_n_entries[n] is the number of buckets (each 409 * leaf has 64 buckets) with n entries. 410 * zs_buckets_with_n_entries[1] should be very close to 411 * zs_num_entries. 412 */ 413 uint64_t zs_buckets_with_n_entries[ZAP_HISTOGRAM_SIZE]; 414} zap_stats_t; 415 416/* 417 * Get statistics about a ZAP object. Note: you need to be aware of the 418 * internal implementation of the ZAP to correctly interpret some of the 419 * statistics. This interface shouldn't be relied on unless you really 420 * know what you're doing. 421 */ 422int zap_get_stats(objset_t *ds, uint64_t zapobj, zap_stats_t *zs); 423 424#ifdef __cplusplus 425} 426#endif 427 428#endif /* _SYS_ZAP_H */
|