1.\" Copyright (c) 2003 Roman Kurakin <rik@cronyx.ru>
2.\" Copyright (c) 2003 Cronyx Engineering
3.\" All rights reserved.
4.\"
5.\" This software is distributed with NO WARRANTIES, not even the implied
6.\" warranties for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
7.\"
8.\" Authors grant any other persons or organisations a permission to use,
9.\" modify and redistribute this software in source and binary forms,
10.\" as long as this message is kept with the software, all derivative
11.\" works or modified versions.
12.\"
13.\" Cronyx Id: cp.4,v 1.1.2.2 2003/09/11 14:56:50 rik Exp $
14.\" $FreeBSD: head/share/man/man4/man4.i386/cx.4 123943 2003-12-28 22:34:47Z ru $
15.\"
16.Dd November 27, 2003
17.Dt CX 4 i386
18.Os
19.Sh NAME
20.Nm cx
21.Nd driver for synchronous/asynchronous Cronyx-Sigma WAN adapters
22.Sh SYNOPSIS
23.Cd "device cx"
24.Pp
25Additional options:
26.Cd "device sppp"
27.Cd "options NETGRAPH"
28.Cd "options NETGRAPH_CRONYX"
29.Pp
30In
31.Pa /boot/device.hints :
32.Cd hint.cx.0.at="isa"
33.Cd hint.cx.0.port="0x240"
34.Cd hint.cx.0.irq="15"
35.Cd hint.cx.0.drq="7"
36.Sh DESCRIPTION
37The
38.Nm
39driver needs either
40.Xr sppp 4
41or
42.Xr netgraph 4 .
43Which one to use is determined by NETGRAPH_CRONYX option.
44If this option is present in your kernel configuration file, the
45.Nm
46driver will be compiled with
47.Xr netgraph 4
48support, else driver will be compiled with
49.Xr sppp 4
50support.
51.Pp
52The base i/o port address specified in
53.Pa /boot/device.hints
54must match the port address set by jumpers on the board.
55The DMA i/o channel and interrupt request numbers are configured
56by software at adapter initialization.
57Legal values are:
58.Pp
59.Bl -tag -compact -width Port:
60.It Port :
610x240, 0x260, 0x280, 0x300, 0x320, 0x380
62.It IRQ :
633, 5, 7, 10, 11, 12, 15
64.It DMA :
655, 6, 7
66.El
67.Pp
68The
69.Nm
70driver supports autodetection.
71As for all non-PNP hardware using of
72autodetection could lead to some potential problems with other devices during
73detection of hardware.
74It is alway better to specify hardware resources manualy.
75.Pp
76Refere to
77.Xr sconfig 8
78for information about the
79.Nm
80adapter configuration.
81.Sh SEE ALSO
82.Xr cx 4 ,
83.Xr sppp 4 ,
84.Xr ifconfig 8 ,
85.Xr sconfig 8 ,
86.Xr spppcontrol 8
87.Sh HISTORY
88The
89.Nm
90driver was updated in
91.Fx 5.2 .
92In most of previous versions of
93.Fx
94the
95.Nm
96driver is out of date.
97The
98.Nm
99driver for previous versions of
100.Fx
101is available from
102.Pa http://www.cronyx.ru/ .
2.\" Copyright (c) 2003 Cronyx Engineering
3.\" All rights reserved.
4.\"
5.\" This software is distributed with NO WARRANTIES, not even the implied
6.\" warranties for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
7.\"
8.\" Authors grant any other persons or organisations a permission to use,
9.\" modify and redistribute this software in source and binary forms,
10.\" as long as this message is kept with the software, all derivative
11.\" works or modified versions.
12.\"
13.\" Cronyx Id: cp.4,v 1.1.2.2 2003/09/11 14:56:50 rik Exp $
14.\" $FreeBSD: head/share/man/man4/man4.i386/cx.4 123943 2003-12-28 22:34:47Z ru $
15.\"
16.Dd November 27, 2003
17.Dt CX 4 i386
18.Os
19.Sh NAME
20.Nm cx
21.Nd driver for synchronous/asynchronous Cronyx-Sigma WAN adapters
22.Sh SYNOPSIS
23.Cd "device cx"
24.Pp
25Additional options:
26.Cd "device sppp"
27.Cd "options NETGRAPH"
28.Cd "options NETGRAPH_CRONYX"
29.Pp
30In
31.Pa /boot/device.hints :
32.Cd hint.cx.0.at="isa"
33.Cd hint.cx.0.port="0x240"
34.Cd hint.cx.0.irq="15"
35.Cd hint.cx.0.drq="7"
36.Sh DESCRIPTION
37The
38.Nm
39driver needs either
40.Xr sppp 4
41or
42.Xr netgraph 4 .
43Which one to use is determined by NETGRAPH_CRONYX option.
44If this option is present in your kernel configuration file, the
45.Nm
46driver will be compiled with
47.Xr netgraph 4
48support, else driver will be compiled with
49.Xr sppp 4
50support.
51.Pp
52The base i/o port address specified in
53.Pa /boot/device.hints
54must match the port address set by jumpers on the board.
55The DMA i/o channel and interrupt request numbers are configured
56by software at adapter initialization.
57Legal values are:
58.Pp
59.Bl -tag -compact -width Port:
60.It Port :
610x240, 0x260, 0x280, 0x300, 0x320, 0x380
62.It IRQ :
633, 5, 7, 10, 11, 12, 15
64.It DMA :
655, 6, 7
66.El
67.Pp
68The
69.Nm
70driver supports autodetection.
71As for all non-PNP hardware using of
72autodetection could lead to some potential problems with other devices during
73detection of hardware.
74It is alway better to specify hardware resources manualy.
75.Pp
76Refere to
77.Xr sconfig 8
78for information about the
79.Nm
80adapter configuration.
81.Sh SEE ALSO
82.Xr cx 4 ,
83.Xr sppp 4 ,
84.Xr ifconfig 8 ,
85.Xr sconfig 8 ,
86.Xr spppcontrol 8
87.Sh HISTORY
88The
89.Nm
90driver was updated in
91.Fx 5.2 .
92In most of previous versions of
93.Fx
94the
95.Nm
96driver is out of date.
97The
98.Nm
99driver for previous versions of
100.Fx
101is available from
102.Pa http://www.cronyx.ru/ .