1#!/bin/sh 2#- 3# Copyright (c) 2010 iXsystems, Inc. All rights reserved. 4# 5# Redistribution and use in source and binary forms, with or without 6# modification, are permitted provided that the following conditions 7# are met: 8# 1. Redistributions of source code must retain the above copyright 9# notice, this list of conditions and the following disclaimer. 10# 2. Redistributions in binary form must reproduce the above copyright 11# notice, this list of conditions and the following disclaimer in the 12# documentation and/or other materials provided with the distribution. 13# 14# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 18# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24# SUCH DAMAGE. 25#
| 1#!/bin/sh 2#- 3# Copyright (c) 2010 iXsystems, Inc. All rights reserved. 4# 5# Redistribution and use in source and binary forms, with or without 6# modification, are permitted provided that the following conditions 7# are met: 8# 1. Redistributions of source code must retain the above copyright 9# notice, this list of conditions and the following disclaimer. 10# 2. Redistributions in binary form must reproduce the above copyright 11# notice, this list of conditions and the following disclaimer in the 12# documentation and/or other materials provided with the distribution. 13# 14# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 18# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24# SUCH DAMAGE. 25#
|
27 28# Functions related to disk operations using newfs 29 30 31# Function which performs the ZFS magic 32setup_zfs_filesystem() 33{ 34 PART="$1" 35 PARTFS="$2" 36 PARTMNT="$3" 37 EXT="$4" 38 PARTGEOM="$5" 39 ZPOOLOPTS="$6" 40 ROOTSLICE="`echo ${PART} | rev | cut -b 2- | rev`" 41 ZPOOLNAME=$(get_zpool_name "${PART}") 42 43 # Sleep a few moments, let the disk catch its breath 44 sleep 5 45 sync 46 47 # Check if we have some custom zpool arguments and use them if so 48 if [ ! -z "${ZPOOLOPTS}" ] ; then 49 rc_halt "zpool create -m none -f ${ZPOOLNAME} ${ZPOOLOPTS}" 50 else 51 # No zpool options, create pool on single device 52 rc_halt "zpool create -m none -f ${ZPOOLNAME} ${PART}${EXT}" 53 fi 54 55 # Disable atime for this zfs partition, speed increase 56 rc_nohalt "zfs set atime=off ${ZPOOLNAME}" 57 58 # Check if we have multiple zfs mounts specified 59 for i in `echo ${PARTMNT} | sed 's|,| |g'` 60 do 61 # Check if we ended up with needing a zfs bootable partition 62 if [ "${i}" = "/" -o "${i}" = "/boot" ] 63 then 64 if [ "$HAVEBOOT" = "YES" ] ; then continue ; fi 65 if [ "${PARTGEOM}" = "MBR" ] 66 then 67 # Lets stamp the proper ZFS boot loader 68 echo_log "Setting up ZFS boot loader support" 69 rc_halt "zpool set bootfs=${ZPOOLNAME} ${ZPOOLNAME}" 70 rc_halt "zpool export ${ZPOOLNAME}" 71 rc_halt "dd if=/boot/zfsboot of=${ROOTSLICE} count=1" 72 rc_halt "dd if=/boot/zfsboot of=${PART}${EXT} skip=1 seek=1024" 73 rc_halt "zpool import ${ZPOOLNAME}" 74 fi 75 fi 76 done 77 78}; 79 80# Runs newfs on all the partiions which we've setup with bsdlabel 81setup_filesystems() 82{ 83 84 # Create the keydir 85 rm -rf ${GELIKEYDIR} >/dev/null 2>/dev/null 86 mkdir ${GELIKEYDIR} 87 88 # Lets go ahead and read through the saved partitions we created, and determine if we need to run 89 # newfs on any of them 90 for PART in `ls ${PARTDIR}` 91 do 92 PARTDEV="`echo $PART | sed 's|-|/|g'`" 93 if [ ! -e "${PARTDEV}" ] 94 then 95 exit_err "ERROR: The partition ${PARTDEV} does not exist. Failure in bsdlabel?" 96 fi 97
| 27 28# Functions related to disk operations using newfs 29 30 31# Function which performs the ZFS magic 32setup_zfs_filesystem() 33{ 34 PART="$1" 35 PARTFS="$2" 36 PARTMNT="$3" 37 EXT="$4" 38 PARTGEOM="$5" 39 ZPOOLOPTS="$6" 40 ROOTSLICE="`echo ${PART} | rev | cut -b 2- | rev`" 41 ZPOOLNAME=$(get_zpool_name "${PART}") 42 43 # Sleep a few moments, let the disk catch its breath 44 sleep 5 45 sync 46 47 # Check if we have some custom zpool arguments and use them if so 48 if [ ! -z "${ZPOOLOPTS}" ] ; then 49 rc_halt "zpool create -m none -f ${ZPOOLNAME} ${ZPOOLOPTS}" 50 else 51 # No zpool options, create pool on single device 52 rc_halt "zpool create -m none -f ${ZPOOLNAME} ${PART}${EXT}" 53 fi 54 55 # Disable atime for this zfs partition, speed increase 56 rc_nohalt "zfs set atime=off ${ZPOOLNAME}" 57 58 # Check if we have multiple zfs mounts specified 59 for i in `echo ${PARTMNT} | sed 's|,| |g'` 60 do 61 # Check if we ended up with needing a zfs bootable partition 62 if [ "${i}" = "/" -o "${i}" = "/boot" ] 63 then 64 if [ "$HAVEBOOT" = "YES" ] ; then continue ; fi 65 if [ "${PARTGEOM}" = "MBR" ] 66 then 67 # Lets stamp the proper ZFS boot loader 68 echo_log "Setting up ZFS boot loader support" 69 rc_halt "zpool set bootfs=${ZPOOLNAME} ${ZPOOLNAME}" 70 rc_halt "zpool export ${ZPOOLNAME}" 71 rc_halt "dd if=/boot/zfsboot of=${ROOTSLICE} count=1" 72 rc_halt "dd if=/boot/zfsboot of=${PART}${EXT} skip=1 seek=1024" 73 rc_halt "zpool import ${ZPOOLNAME}" 74 fi 75 fi 76 done 77 78}; 79 80# Runs newfs on all the partiions which we've setup with bsdlabel 81setup_filesystems() 82{ 83 84 # Create the keydir 85 rm -rf ${GELIKEYDIR} >/dev/null 2>/dev/null 86 mkdir ${GELIKEYDIR} 87 88 # Lets go ahead and read through the saved partitions we created, and determine if we need to run 89 # newfs on any of them 90 for PART in `ls ${PARTDIR}` 91 do 92 PARTDEV="`echo $PART | sed 's|-|/|g'`" 93 if [ ! -e "${PARTDEV}" ] 94 then 95 exit_err "ERROR: The partition ${PARTDEV} does not exist. Failure in bsdlabel?" 96 fi 97
|
105 106 # Make sure journaling isn't enabled on this device 107 if [ -e "${PARTDEV}.journal" ] 108 then 109 rc_nohalt "gjournal stop -f ${PARTDEV}.journal" 110 rc_nohalt "gjournal clear ${PARTDEV}" 111 fi 112 113 # Setup encryption if necessary 114 if [ "${PARTENC}" = "ON" -a "${PARTFS}" != "SWAP" ] 115 then 116 echo_log "Creating geli provider for ${PARTDEV}" 117 118 if [ -e "${PARTDIR}-enc/${PART}-encpass" ] ; then 119 # Using a passphrase 120 rc_halt "dd if=/dev/random of=${GELIKEYDIR}/${PART}.key bs=64 count=1" 121 rc_halt "geli init -J ${PARTDIR}-enc/${PART}-encpass ${PARTDEV}" 122 rc_halt "geli attach -j ${PARTDIR}-enc/${PART}-encpass ${PARTDEV}" 123 else 124 # No Encryption password, use key file 125 rc_halt "dd if=/dev/random of=${GELIKEYDIR}/${PART}.key bs=64 count=1" 126 rc_halt "geli init -b -s 4096 -P -K ${GELIKEYDIR}/${PART}.key ${PARTDEV}" 127 rc_halt "geli attach -p -k ${GELIKEYDIR}/${PART}.key ${PARTDEV}" 128 129 fi 130 131 EXT=".eli" 132 else 133 # No Encryption 134 EXT="" 135 fi 136 137 case ${PARTFS} in 138 UFS) 139 echo_log "NEWFS: ${PARTDEV} - ${PARTFS}" 140 sleep 2 141 rc_halt "newfs ${PARTXTRAOPTS} ${PARTDEV}${EXT}" 142 sleep 2 143 rc_halt "sync" 144 rc_halt "glabel label ${PARTLABEL} ${PARTDEV}${EXT}" 145 rc_halt "sync" 146 147 # Set flag that we've found a boot partition 148 if [ "$PARTMNT" = "/boot" -o "${PARTMNT}" = "/" ] ; then 149 HAVEBOOT="YES" 150 fi 151 sleep 2 152 ;; 153 154 UFS+S) 155 echo_log "NEWFS: ${PARTDEV} - ${PARTFS}" 156 sleep 2 157 rc_halt "newfs ${PARTXTRAOPTS} -U ${PARTDEV}${EXT}" 158 sleep 2 159 rc_halt "sync" 160 rc_halt "glabel label ${PARTLABEL} ${PARTDEV}${EXT}" 161 rc_halt "sync" 162 # Set flag that we've found a boot partition 163 if [ "$PARTMNT" = "/boot" -o "${PARTMNT}" = "/" ] ; then 164 HAVEBOOT="YES" 165 fi 166 sleep 2 167 ;; 168 169 UFS+SUJ) 170 echo_log "NEWFS: ${PARTDEV} - ${PARTFS}" 171 sleep 2 172 rc_halt "newfs ${PARTXTRAOPTS} -U ${PARTDEV}${EXT}" 173 sleep 2 174 rc_halt "sync" 175 rc_halt "tunefs -j enable ${PARTDEV}${EXT}" 176 sleep 2 177 rc_halt "sync" 178 rc_halt "glabel label ${PARTLABEL} ${PARTDEV}${EXT}" 179 rc_halt "sync" 180 # Set flag that we've found a boot partition 181 if [ "$PARTMNT" = "/boot" -o "${PARTMNT}" = "/" ] ; then 182 HAVEBOOT="YES" 183 fi 184 sleep 2 185 ;; 186 187 188 UFS+J) 189 echo_log "NEWFS: ${PARTDEV} - ${PARTFS}" 190 sleep 2 191 rc_halt "newfs ${PARTDEV}${EXT}" 192 sleep 2 193 rc_halt "gjournal label -f ${PARTDEV}${EXT}" 194 sleep 2 195 rc_halt "newfs ${PARTXTRAOPTS} -O 2 -J ${PARTDEV}${EXT}.journal" 196 sleep 2 197 rc_halt "sync" 198 rc_halt "glabel label ${PARTLABEL} ${PARTDEV}${EXT}.journal" 199 rc_halt "sync" 200 # Set flag that we've found a boot partition 201 if [ "$PARTMNT" = "/boot" -o "${PARTMNT}" = "/" ] ; then 202 HAVEBOOT="YES" 203 fi 204 sleep 2 205 ;; 206 207 ZFS) 208 echo_log "NEWFS: ${PARTDEV} - ${PARTFS}" 209 setup_zfs_filesystem "${PARTDEV}" "${PARTFS}" "${PARTMNT}" "${EXT}" "${PARTGEOM}" "${PARTXTRAOPTS}" 210 ;; 211 212 SWAP) 213 rc_halt "sync" 214 rc_halt "glabel label ${PARTLABEL} ${PARTDEV}${EXT}" 215 rc_halt "sync" 216 sleep 2 217 ;; 218 219 IMAGE) 220 write_image "${PARTIMAGE}" "${PARTDEV}" 221 sleep 2 222 ;; 223 224 *) exit_err "ERROR: Got unknown file-system type $PARTFS" ;; 225 esac 226 227 done 228};
| 105 106 # Make sure journaling isn't enabled on this device 107 if [ -e "${PARTDEV}.journal" ] 108 then 109 rc_nohalt "gjournal stop -f ${PARTDEV}.journal" 110 rc_nohalt "gjournal clear ${PARTDEV}" 111 fi 112 113 # Setup encryption if necessary 114 if [ "${PARTENC}" = "ON" -a "${PARTFS}" != "SWAP" ] 115 then 116 echo_log "Creating geli provider for ${PARTDEV}" 117 118 if [ -e "${PARTDIR}-enc/${PART}-encpass" ] ; then 119 # Using a passphrase 120 rc_halt "dd if=/dev/random of=${GELIKEYDIR}/${PART}.key bs=64 count=1" 121 rc_halt "geli init -J ${PARTDIR}-enc/${PART}-encpass ${PARTDEV}" 122 rc_halt "geli attach -j ${PARTDIR}-enc/${PART}-encpass ${PARTDEV}" 123 else 124 # No Encryption password, use key file 125 rc_halt "dd if=/dev/random of=${GELIKEYDIR}/${PART}.key bs=64 count=1" 126 rc_halt "geli init -b -s 4096 -P -K ${GELIKEYDIR}/${PART}.key ${PARTDEV}" 127 rc_halt "geli attach -p -k ${GELIKEYDIR}/${PART}.key ${PARTDEV}" 128 129 fi 130 131 EXT=".eli" 132 else 133 # No Encryption 134 EXT="" 135 fi 136 137 case ${PARTFS} in 138 UFS) 139 echo_log "NEWFS: ${PARTDEV} - ${PARTFS}" 140 sleep 2 141 rc_halt "newfs ${PARTXTRAOPTS} ${PARTDEV}${EXT}" 142 sleep 2 143 rc_halt "sync" 144 rc_halt "glabel label ${PARTLABEL} ${PARTDEV}${EXT}" 145 rc_halt "sync" 146 147 # Set flag that we've found a boot partition 148 if [ "$PARTMNT" = "/boot" -o "${PARTMNT}" = "/" ] ; then 149 HAVEBOOT="YES" 150 fi 151 sleep 2 152 ;; 153 154 UFS+S) 155 echo_log "NEWFS: ${PARTDEV} - ${PARTFS}" 156 sleep 2 157 rc_halt "newfs ${PARTXTRAOPTS} -U ${PARTDEV}${EXT}" 158 sleep 2 159 rc_halt "sync" 160 rc_halt "glabel label ${PARTLABEL} ${PARTDEV}${EXT}" 161 rc_halt "sync" 162 # Set flag that we've found a boot partition 163 if [ "$PARTMNT" = "/boot" -o "${PARTMNT}" = "/" ] ; then 164 HAVEBOOT="YES" 165 fi 166 sleep 2 167 ;; 168 169 UFS+SUJ) 170 echo_log "NEWFS: ${PARTDEV} - ${PARTFS}" 171 sleep 2 172 rc_halt "newfs ${PARTXTRAOPTS} -U ${PARTDEV}${EXT}" 173 sleep 2 174 rc_halt "sync" 175 rc_halt "tunefs -j enable ${PARTDEV}${EXT}" 176 sleep 2 177 rc_halt "sync" 178 rc_halt "glabel label ${PARTLABEL} ${PARTDEV}${EXT}" 179 rc_halt "sync" 180 # Set flag that we've found a boot partition 181 if [ "$PARTMNT" = "/boot" -o "${PARTMNT}" = "/" ] ; then 182 HAVEBOOT="YES" 183 fi 184 sleep 2 185 ;; 186 187 188 UFS+J) 189 echo_log "NEWFS: ${PARTDEV} - ${PARTFS}" 190 sleep 2 191 rc_halt "newfs ${PARTDEV}${EXT}" 192 sleep 2 193 rc_halt "gjournal label -f ${PARTDEV}${EXT}" 194 sleep 2 195 rc_halt "newfs ${PARTXTRAOPTS} -O 2 -J ${PARTDEV}${EXT}.journal" 196 sleep 2 197 rc_halt "sync" 198 rc_halt "glabel label ${PARTLABEL} ${PARTDEV}${EXT}.journal" 199 rc_halt "sync" 200 # Set flag that we've found a boot partition 201 if [ "$PARTMNT" = "/boot" -o "${PARTMNT}" = "/" ] ; then 202 HAVEBOOT="YES" 203 fi 204 sleep 2 205 ;; 206 207 ZFS) 208 echo_log "NEWFS: ${PARTDEV} - ${PARTFS}" 209 setup_zfs_filesystem "${PARTDEV}" "${PARTFS}" "${PARTMNT}" "${EXT}" "${PARTGEOM}" "${PARTXTRAOPTS}" 210 ;; 211 212 SWAP) 213 rc_halt "sync" 214 rc_halt "glabel label ${PARTLABEL} ${PARTDEV}${EXT}" 215 rc_halt "sync" 216 sleep 2 217 ;; 218 219 IMAGE) 220 write_image "${PARTIMAGE}" "${PARTDEV}" 221 sleep 2 222 ;; 223 224 *) exit_err "ERROR: Got unknown file-system type $PARTFS" ;; 225 esac 226 227 done 228};
|