1/* 2 * Copyright 2011 Freescale Semiconductor, Inc. 3 * Copyright 2011 Linaro Ltd. 4 * 5 * The code contained herein is licensed under the GNU General Public 6 * License. You may obtain a copy of the GNU General Public License 7 * Version 2 or later at the following locations: 8 * 9 * http://www.opensource.org/licenses/gpl-license.html 10 * http://www.gnu.org/copyleft/gpl.html 11 */ 12 13/dts-v1/; 14#include "imx6q.dtsi"
| 1/* 2 * Copyright 2011 Freescale Semiconductor, Inc. 3 * Copyright 2011 Linaro Ltd. 4 * 5 * The code contained herein is licensed under the GNU General Public 6 * License. You may obtain a copy of the GNU General Public License 7 * Version 2 or later at the following locations: 8 * 9 * http://www.opensource.org/licenses/gpl-license.html 10 * http://www.gnu.org/copyleft/gpl.html 11 */ 12 13/dts-v1/; 14#include "imx6q.dtsi"
|
| 15#include "imx6qdl-sabrelite.dtsi"
|
15 16/ { 17 model = "Freescale i.MX6 Quad SABRE Lite Board"; 18 compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";
| 16 17/ { 18 model = "Freescale i.MX6 Quad SABRE Lite Board"; 19 compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";
|
19 20 memory { 21 reg = <0x10000000 0x40000000>; 22 }; 23 24 regulators { 25 compatible = "simple-bus"; 26 27 reg_2p5v: 2p5v { 28 compatible = "regulator-fixed"; 29 regulator-name = "2P5V"; 30 regulator-min-microvolt = <2500000>; 31 regulator-max-microvolt = <2500000>; 32 regulator-always-on; 33 }; 34 35 reg_3p3v: 3p3v { 36 compatible = "regulator-fixed"; 37 regulator-name = "3P3V"; 38 regulator-min-microvolt = <3300000>; 39 regulator-max-microvolt = <3300000>; 40 regulator-always-on; 41 }; 42 43 reg_usb_otg_vbus: usb_otg_vbus { 44 compatible = "regulator-fixed"; 45 regulator-name = "usb_otg_vbus"; 46 regulator-min-microvolt = <5000000>; 47 regulator-max-microvolt = <5000000>; 48 gpio = <&gpio3 22 0>; 49 enable-active-high; 50 }; 51 }; 52 53 sound { 54 compatible = "fsl,imx6q-sabrelite-sgtl5000", 55 "fsl,imx-audio-sgtl5000"; 56 model = "imx6q-sabrelite-sgtl5000"; 57 ssi-controller = <&ssi1>; 58 audio-codec = <&codec>; 59 audio-routing = 60 "MIC_IN", "Mic Jack", 61 "Mic Jack", "Mic Bias", 62 "Headphone Jack", "HP_OUT"; 63 mux-int-port = <1>; 64 mux-ext-port = <4>; 65 };
| |
66}; 67
| 20}; 21
|
68&audmux { 69 status = "okay"; 70 pinctrl-names = "default"; 71 pinctrl-0 = <&pinctrl_audmux_1>; 72}; 73 74&ecspi1 { 75 fsl,spi-num-chipselects = <1>; 76 cs-gpios = <&gpio3 19 0>; 77 pinctrl-names = "default"; 78 pinctrl-0 = <&pinctrl_ecspi1_1>; 79 status = "okay"; 80 81 flash: m25p80@0 { 82 compatible = "sst,sst25vf016b"; 83 spi-max-frequency = <20000000>; 84 reg = <0>; 85 }; 86}; 87 88&fec { 89 pinctrl-names = "default"; 90 pinctrl-0 = <&pinctrl_enet_1>; 91 phy-mode = "rgmii"; 92 phy-reset-gpios = <&gpio3 23 0>; 93 status = "okay"; 94}; 95 96&i2c1 { 97 status = "okay"; 98 clock-frequency = <100000>; 99 pinctrl-names = "default"; 100 pinctrl-0 = <&pinctrl_i2c1_1>; 101 102 codec: sgtl5000@0a { 103 compatible = "fsl,sgtl5000"; 104 reg = <0x0a>; 105 clocks = <&clks 201>; 106 VDDA-supply = <®_2p5v>; 107 VDDIO-supply = <®_3p3v>; 108 }; 109}; 110 111&iomuxc { 112 pinctrl-names = "default"; 113 pinctrl-0 = <&pinctrl_hog>; 114 115 hog { 116 pinctrl_hog: hoggrp { 117 fsl,pins = < 118 MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x80000000 119 MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x80000000 120 MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000 121 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 122 MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000 123 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 124 MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0 125 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x80000000 126 MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000 127 >; 128 }; 129 }; 130}; 131 132&ldb { 133 status = "okay"; 134 135 lvds-channel@0 { 136 fsl,data-mapping = "spwg"; 137 fsl,data-width = <18>; 138 status = "okay"; 139 140 display-timings { 141 native-mode = <&timing0>; 142 timing0: hsd100pxn1 { 143 clock-frequency = <65000000>; 144 hactive = <1024>; 145 vactive = <768>; 146 hback-porch = <220>; 147 hfront-porch = <40>; 148 vback-porch = <21>; 149 vfront-porch = <7>; 150 hsync-len = <60>; 151 vsync-len = <10>; 152 }; 153 }; 154 }; 155}; 156
| |
157&sata { 158 status = "okay"; 159};
| 22&sata { 23 status = "okay"; 24};
|
160 161&ssi1 { 162 fsl,mode = "i2s-slave"; 163 status = "okay"; 164}; 165 166&uart2 { 167 status = "okay"; 168 pinctrl-names = "default"; 169 pinctrl-0 = <&pinctrl_uart2_1>; 170}; 171 172&usbh1 { 173 status = "okay"; 174}; 175 176&usbotg { 177 vbus-supply = <®_usb_otg_vbus>; 178 pinctrl-names = "default"; 179 pinctrl-0 = <&pinctrl_usbotg_1>; 180 disable-over-current; 181 status = "okay"; 182}; 183 184&usdhc3 { 185 pinctrl-names = "default"; 186 pinctrl-0 = <&pinctrl_usdhc3_2>; 187 cd-gpios = <&gpio7 0 0>; 188 wp-gpios = <&gpio7 1 0>; 189 vmmc-supply = <®_3p3v>; 190 status = "okay"; 191}; 192 193&usdhc4 { 194 pinctrl-names = "default"; 195 pinctrl-0 = <&pinctrl_usdhc4_2>; 196 cd-gpios = <&gpio2 6 0>; 197 wp-gpios = <&gpio2 7 0>; 198 vmmc-supply = <®_3p3v>; 199 status = "okay"; 200};
| |
| |