Deleted Added
sdiff udiff text old ( 262573 ) new ( 270864 )
full compact
imx53-qsb.dts (262573) imx53-qsb.dts (270864)
1/*
2 * Copyright 2011 Freescale Semiconductor, Inc.
3 * Copyright 2011 Linaro Ltd.
4 *
5 * The code contained herein is licensed under the GNU General Public
6 * License. You may obtain a copy of the GNU General Public License
7 * Version 2 or later at the following locations:
8 *
9 * http://www.opensource.org/licenses/gpl-license.html
10 * http://www.gnu.org/copyleft/gpl.html
11 */
12
13/dts-v1/;
1/*
2 * Copyright 2011 Freescale Semiconductor, Inc.
3 * Copyright 2011 Linaro Ltd.
4 *
5 * The code contained herein is licensed under the GNU General Public
6 * License. You may obtain a copy of the GNU General Public License
7 * Version 2 or later at the following locations:
8 *
9 * http://www.opensource.org/licenses/gpl-license.html
10 * http://www.gnu.org/copyleft/gpl.html
11 */
12
13/dts-v1/;
14#include "imx53.dtsi"
14#include "imx53-qsb-common.dtsi"
15
16/ {
17 model = "Freescale i.MX53 Quick Start Board";
18 compatible = "fsl,imx53-qsb", "fsl,imx53";
15
16/ {
17 model = "Freescale i.MX53 Quick Start Board";
18 compatible = "fsl,imx53-qsb", "fsl,imx53";
19
20 memory {
21 reg = <0x70000000 0x40000000>;
22 };
23
24 display@di0 {
25 compatible = "fsl,imx-parallel-display";
26 crtcs = <&ipu 0>;
27 interface-pix-fmt = "rgb565";
28 pinctrl-names = "default";
29 pinctrl-0 = <&pinctrl_ipu_disp0_1>;
30 status = "disabled";
31 display-timings {
32 claawvga {
33 native-mode;
34 clock-frequency = <27000000>;
35 hactive = <800>;
36 vactive = <480>;
37 hback-porch = <40>;
38 hfront-porch = <60>;
39 vback-porch = <10>;
40 vfront-porch = <10>;
41 hsync-len = <20>;
42 vsync-len = <10>;
43 hsync-active = <0>;
44 vsync-active = <0>;
45 de-active = <1>;
46 pixelclk-active = <0>;
47 };
48 };
49 };
50
51 gpio-keys {
52 compatible = "gpio-keys";
53
54 power {
55 label = "Power Button";
56 gpios = <&gpio1 8 0>;
57 linux,code = <116>; /* KEY_POWER */
58 };
59
60 volume-up {
61 label = "Volume Up";
62 gpios = <&gpio2 14 0>;
63 linux,code = <115>; /* KEY_VOLUMEUP */
64 gpio-key,wakeup;
65 };
66
67 volume-down {
68 label = "Volume Down";
69 gpios = <&gpio2 15 0>;
70 linux,code = <114>; /* KEY_VOLUMEDOWN */
71 gpio-key,wakeup;
72 };
73 };
74
75 leds {
76 compatible = "gpio-leds";
77 pinctrl-names = "default";
78 pinctrl-0 = <&led_pin_gpio7_7>;
79
80 user {
81 label = "Heartbeat";
82 gpios = <&gpio7 7 0>;
83 linux,default-trigger = "heartbeat";
84 };
85 };
86
87 regulators {
88 compatible = "simple-bus";
89
90 reg_3p2v: 3p2v {
91 compatible = "regulator-fixed";
92 regulator-name = "3P2V";
93 regulator-min-microvolt = <3200000>;
94 regulator-max-microvolt = <3200000>;
95 regulator-always-on;
96 };
97
98 reg_usb_vbus: usb_vbus {
99 compatible = "regulator-fixed";
100 regulator-name = "usb_vbus";
101 regulator-min-microvolt = <5000000>;
102 regulator-max-microvolt = <5000000>;
103 gpio = <&gpio7 8 0>;
104 enable-active-high;
105 };
106 };
107
108 sound {
109 compatible = "fsl,imx53-qsb-sgtl5000",
110 "fsl,imx-audio-sgtl5000";
111 model = "imx53-qsb-sgtl5000";
112 ssi-controller = <&ssi2>;
113 audio-codec = <&sgtl5000>;
114 audio-routing =
115 "MIC_IN", "Mic Jack",
116 "Mic Jack", "Mic Bias",
117 "Headphone Jack", "HP_OUT";
118 mux-int-port = <2>;
119 mux-ext-port = <5>;
120 };
121};
122
19};
20
123&esdhc1 {
124 pinctrl-names = "default";
125 pinctrl-0 = <&pinctrl_esdhc1_1>;
126 status = "okay";
127};
128
129&ssi2 {
130 fsl,mode = "i2s-slave";
131 status = "okay";
132};
133
134&esdhc3 {
135 pinctrl-names = "default";
136 pinctrl-0 = <&pinctrl_esdhc3_1>;
137 cd-gpios = <&gpio3 11 0>;
138 wp-gpios = <&gpio3 12 0>;
139 bus-width = <8>;
140 status = "okay";
141};
142
143&iomuxc {
144 pinctrl-names = "default";
145 pinctrl-0 = <&pinctrl_hog>;
146
147 hog {
148 pinctrl_hog: hoggrp {
149 fsl,pins = <
150 MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000
151 MX53_PAD_GPIO_8__GPIO1_8 0x80000000
152 MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000
153 MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000
154 MX53_PAD_EIM_DA11__GPIO3_11 0x80000000
155 MX53_PAD_EIM_DA12__GPIO3_12 0x80000000
156 MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000
157 MX53_PAD_PATA_DA_2__GPIO7_8 0x80000000
158 MX53_PAD_GPIO_16__GPIO7_11 0x80000000
159 >;
160 };
161
162 led_pin_gpio7_7: led_gpio7_7@0 {
163 fsl,pins = <
164 MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000
165 >;
166 };
167 };
168
169};
170
171&uart1 {
172 pinctrl-names = "default";
173 pinctrl-0 = <&pinctrl_uart1_1>;
174 status = "okay";
175};
176
177&i2c2 {
178 pinctrl-names = "default";
179 pinctrl-0 = <&pinctrl_i2c2_1>;
180 status = "okay";
181
182 sgtl5000: codec@0a {
183 compatible = "fsl,sgtl5000";
184 reg = <0x0a>;
185 VDDA-supply = <&reg_3p2v>;
186 VDDIO-supply = <&reg_3p2v>;
187 clocks = <&clks 150>;
188 };
189};
190
191&i2c1 {
21&i2c1 {
192 pinctrl-names = "default";
193 pinctrl-0 = <&pinctrl_i2c1_1>;
194 status = "okay";
195
196 accelerometer: mma8450@1c {
197 compatible = "fsl,mma8450";
198 reg = <0x1c>;
199 };
200
201 pmic: dialog@48 {
202 compatible = "dlg,da9053-aa", "dlg,da9052";
203 reg = <0x48>;
204 interrupt-parent = <&gpio7>;
205 interrupts = <11 0x8>; /* low-level active IRQ at GPIO7_11 */
206
207 regulators {
208 buck1_reg: buck1 {

--- 78 unchanged lines hidden (view full) ---

287 ldo10_reg: ldo10 {
288 regulator-min-microvolt = <1250000>;
289 regulator-max-microvolt = <3650000>;
290 regulator-always-on;
291 };
292 };
293 };
294};
22 pmic: dialog@48 {
23 compatible = "dlg,da9053-aa", "dlg,da9052";
24 reg = <0x48>;
25 interrupt-parent = <&gpio7>;
26 interrupts = <11 0x8>; /* low-level active IRQ at GPIO7_11 */
27
28 regulators {
29 buck1_reg: buck1 {

--- 78 unchanged lines hidden (view full) ---

108 ldo10_reg: ldo10 {
109 regulator-min-microvolt = <1250000>;
110 regulator-max-microvolt = <3650000>;
111 regulator-always-on;
112 };
113 };
114 };
115};
295
296&audmux {
297 pinctrl-names = "default";
298 pinctrl-0 = <&pinctrl_audmux_1>;
299 status = "okay";
300};
301
302&fec {
303 pinctrl-names = "default";
304 pinctrl-0 = <&pinctrl_fec_1>;
305 phy-mode = "rmii";
306 phy-reset-gpios = <&gpio7 6 0>;
307 status = "okay";
308};
309
310&vpu {
311 status = "okay";
312};
313
314&usbh1 {
315 vbus-supply = <&reg_usb_vbus>;
316 phy_type = "utmi";
317 status = "okay";
318};
319
320&usbotg {
321 dr_mode = "peripheral";
322 status = "okay";
323};