1/* 2 * at91sam9263ek.dts - Device Tree file for Atmel at91sam9263 reference board 3 * 4 * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> 5 * 6 * Licensed under GPLv2 only 7 */ 8/dts-v1/; 9#include "at91sam9263.dtsi" 10 11/ { 12 model = "Atmel at91sam9263ek"; 13 compatible = "atmel,at91sam9263ek", "atmel,at91sam9263", "atmel,at91sam9"; 14 15 chosen { 16 bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs"; 17 }; 18 19 memory { 20 reg = <0x20000000 0x4000000>; 21 }; 22 23 clocks { 24 #address-cells = <1>; 25 #size-cells = <1>; 26 ranges; 27 28 main_clock: clock@0 { 29 compatible = "atmel,osc", "fixed-clock"; 30 clock-frequency = <16367660>; 31 };
| 1/* 2 * at91sam9263ek.dts - Device Tree file for Atmel at91sam9263 reference board 3 * 4 * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> 5 * 6 * Licensed under GPLv2 only 7 */ 8/dts-v1/; 9#include "at91sam9263.dtsi" 10 11/ { 12 model = "Atmel at91sam9263ek"; 13 compatible = "atmel,at91sam9263ek", "atmel,at91sam9263", "atmel,at91sam9"; 14 15 chosen { 16 bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs"; 17 }; 18 19 memory { 20 reg = <0x20000000 0x4000000>; 21 }; 22 23 clocks { 24 #address-cells = <1>; 25 #size-cells = <1>; 26 ranges; 27 28 main_clock: clock@0 { 29 compatible = "atmel,osc", "fixed-clock"; 30 clock-frequency = <16367660>; 31 };
|
32 }; 33 34 ahb { 35 apb { 36 dbgu: serial@ffffee00 { 37 status = "okay"; 38 }; 39 40 usart0: serial@fff8c000 { 41 pinctrl-0 = < 42 &pinctrl_usart0 43 &pinctrl_usart0_rts 44 &pinctrl_usart0_cts>; 45 status = "okay"; 46 }; 47 48 macb0: ethernet@fffbc000 { 49 phy-mode = "rmii"; 50 status = "okay"; 51 }; 52 53 usb1: gadget@fff78000 { 54 atmel,vbus-gpio = <&pioA 25 GPIO_ACTIVE_HIGH>; 55 status = "okay"; 56 }; 57 58 mmc0: mmc@fff80000 { 59 pinctrl-0 = < 60 &pinctrl_board_mmc0 61 &pinctrl_mmc0_clk 62 &pinctrl_mmc0_slot0_cmd_dat0 63 &pinctrl_mmc0_slot0_dat1_3>; 64 status = "okay"; 65 slot@0 { 66 reg = <0>; 67 bus-width = <4>; 68 cd-gpios = <&pioE 18 GPIO_ACTIVE_HIGH>; 69 wp-gpios = <&pioE 19 GPIO_ACTIVE_HIGH>; 70 }; 71 }; 72 73 pinctrl@fffff200 { 74 mmc0 { 75 pinctrl_board_mmc0: mmc0-board { 76 atmel,pins = 77 <AT91_PIOE 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH /* PE18 gpio CD pin pull up and deglitch */ 78 AT91_PIOE 19 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PE19 gpio WP pin pull up */ 79 }; 80 }; 81 }; 82 83 spi0: spi@fffa4000 { 84 status = "okay"; 85 cs-gpios = <&pioA 5 0>, <0>, <0>, <0>; 86 mtd_dataflash@0 { 87 compatible = "atmel,at45", "atmel,dataflash"; 88 spi-max-frequency = <50000000>; 89 reg = <0>; 90 }; 91 }; 92 93 watchdog@fffffd40 { 94 status = "okay"; 95 }; 96 }; 97 98 fb0: fb@0x00700000 { 99 display = <&display0>; 100 status = "okay"; 101 102 display0: display { 103 bits-per-pixel = <16>; 104 atmel,lcdcon-backlight; 105 atmel,dmacon = <0x1>; 106 atmel,lcdcon2 = <0x80008002>; 107 atmel,guard-time = <1>; 108 109 display-timings { 110 native-mode = <&timing0>; 111 timing0: timing0 { 112 clock-frequency = <4965000>; 113 hactive = <240>; 114 vactive = <320>; 115 hback-porch = <1>; 116 hfront-porch = <33>; 117 vback-porch = <1>; 118 vfront-porch = <0>; 119 hsync-len = <5>; 120 vsync-len = <1>; 121 hsync-active = <1>; 122 vsync-active = <1>; 123 }; 124 }; 125 }; 126 }; 127 128 nand0: nand@40000000 { 129 nand-bus-width = <8>; 130 nand-ecc-mode = "soft"; 131 nand-on-flash-bbt = <1>; 132 status = "okay"; 133 134 at91bootstrap@0 { 135 label = "at91bootstrap"; 136 reg = <0x0 0x20000>; 137 }; 138 139 barebox@20000 { 140 label = "barebox"; 141 reg = <0x20000 0x40000>; 142 }; 143 144 bareboxenv@60000 { 145 label = "bareboxenv"; 146 reg = <0x60000 0x20000>; 147 }; 148 149 bareboxenv2@80000 { 150 label = "bareboxenv2"; 151 reg = <0x80000 0x20000>; 152 }; 153 154 oftree@80000 { 155 label = "oftree"; 156 reg = <0xa0000 0x20000>; 157 }; 158 159 kernel@a0000 { 160 label = "kernel"; 161 reg = <0xc0000 0x400000>; 162 }; 163 164 rootfs@4a0000 { 165 label = "rootfs"; 166 reg = <0x4c0000 0x7800000>; 167 }; 168 169 data@7ca0000 { 170 label = "data"; 171 reg = <0x7cc0000 0x8340000>; 172 }; 173 }; 174 175 usb0: ohci@00a00000 { 176 num-ports = <2>; 177 status = "okay"; 178 atmel,vbus-gpio = <&pioA 24 GPIO_ACTIVE_HIGH 179 &pioA 21 GPIO_ACTIVE_HIGH 180 >; 181 }; 182 }; 183 184 leds { 185 compatible = "gpio-leds"; 186 187 d3 { 188 label = "d3"; 189 gpios = <&pioB 7 GPIO_ACTIVE_HIGH>; 190 linux,default-trigger = "heartbeat"; 191 }; 192 193 d2 { 194 label = "d2"; 195 gpios = <&pioC 29 GPIO_ACTIVE_LOW>; 196 linux,default-trigger = "nand-disk"; 197 }; 198 }; 199 200 gpio_keys { 201 compatible = "gpio-keys"; 202 203 left_click { 204 label = "left_click"; 205 gpios = <&pioC 5 GPIO_ACTIVE_LOW>; 206 linux,code = <272>; 207 gpio-key,wakeup; 208 }; 209 210 right_click { 211 label = "right_click"; 212 gpios = <&pioC 4 GPIO_ACTIVE_LOW>; 213 linux,code = <273>; 214 gpio-key,wakeup; 215 }; 216 }; 217 218 i2c@0 { 219 status = "okay"; 220 221 24c512@50 { 222 compatible = "24c512"; 223 reg = <0x50>; 224 pagesize = <128>; 225 }; 226 }; 227};
| 40 }; 41 42 ahb { 43 apb { 44 dbgu: serial@ffffee00 { 45 status = "okay"; 46 }; 47 48 usart0: serial@fff8c000 { 49 pinctrl-0 = < 50 &pinctrl_usart0 51 &pinctrl_usart0_rts 52 &pinctrl_usart0_cts>; 53 status = "okay"; 54 }; 55 56 macb0: ethernet@fffbc000 { 57 phy-mode = "rmii"; 58 status = "okay"; 59 }; 60 61 usb1: gadget@fff78000 { 62 atmel,vbus-gpio = <&pioA 25 GPIO_ACTIVE_HIGH>; 63 status = "okay"; 64 }; 65 66 mmc0: mmc@fff80000 { 67 pinctrl-0 = < 68 &pinctrl_board_mmc0 69 &pinctrl_mmc0_clk 70 &pinctrl_mmc0_slot0_cmd_dat0 71 &pinctrl_mmc0_slot0_dat1_3>; 72 status = "okay"; 73 slot@0 { 74 reg = <0>; 75 bus-width = <4>; 76 cd-gpios = <&pioE 18 GPIO_ACTIVE_HIGH>; 77 wp-gpios = <&pioE 19 GPIO_ACTIVE_HIGH>; 78 }; 79 }; 80 81 pinctrl@fffff200 { 82 mmc0 { 83 pinctrl_board_mmc0: mmc0-board { 84 atmel,pins = 85 <AT91_PIOE 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH /* PE18 gpio CD pin pull up and deglitch */ 86 AT91_PIOE 19 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PE19 gpio WP pin pull up */ 87 }; 88 }; 89 }; 90 91 spi0: spi@fffa4000 { 92 status = "okay"; 93 cs-gpios = <&pioA 5 0>, <0>, <0>, <0>; 94 mtd_dataflash@0 { 95 compatible = "atmel,at45", "atmel,dataflash"; 96 spi-max-frequency = <50000000>; 97 reg = <0>; 98 }; 99 }; 100 101 watchdog@fffffd40 { 102 status = "okay"; 103 }; 104 }; 105 106 fb0: fb@0x00700000 { 107 display = <&display0>; 108 status = "okay"; 109 110 display0: display { 111 bits-per-pixel = <16>; 112 atmel,lcdcon-backlight; 113 atmel,dmacon = <0x1>; 114 atmel,lcdcon2 = <0x80008002>; 115 atmel,guard-time = <1>; 116 117 display-timings { 118 native-mode = <&timing0>; 119 timing0: timing0 { 120 clock-frequency = <4965000>; 121 hactive = <240>; 122 vactive = <320>; 123 hback-porch = <1>; 124 hfront-porch = <33>; 125 vback-porch = <1>; 126 vfront-porch = <0>; 127 hsync-len = <5>; 128 vsync-len = <1>; 129 hsync-active = <1>; 130 vsync-active = <1>; 131 }; 132 }; 133 }; 134 }; 135 136 nand0: nand@40000000 { 137 nand-bus-width = <8>; 138 nand-ecc-mode = "soft"; 139 nand-on-flash-bbt = <1>; 140 status = "okay"; 141 142 at91bootstrap@0 { 143 label = "at91bootstrap"; 144 reg = <0x0 0x20000>; 145 }; 146 147 barebox@20000 { 148 label = "barebox"; 149 reg = <0x20000 0x40000>; 150 }; 151 152 bareboxenv@60000 { 153 label = "bareboxenv"; 154 reg = <0x60000 0x20000>; 155 }; 156 157 bareboxenv2@80000 { 158 label = "bareboxenv2"; 159 reg = <0x80000 0x20000>; 160 }; 161 162 oftree@80000 { 163 label = "oftree"; 164 reg = <0xa0000 0x20000>; 165 }; 166 167 kernel@a0000 { 168 label = "kernel"; 169 reg = <0xc0000 0x400000>; 170 }; 171 172 rootfs@4a0000 { 173 label = "rootfs"; 174 reg = <0x4c0000 0x7800000>; 175 }; 176 177 data@7ca0000 { 178 label = "data"; 179 reg = <0x7cc0000 0x8340000>; 180 }; 181 }; 182 183 usb0: ohci@00a00000 { 184 num-ports = <2>; 185 status = "okay"; 186 atmel,vbus-gpio = <&pioA 24 GPIO_ACTIVE_HIGH 187 &pioA 21 GPIO_ACTIVE_HIGH 188 >; 189 }; 190 }; 191 192 leds { 193 compatible = "gpio-leds"; 194 195 d3 { 196 label = "d3"; 197 gpios = <&pioB 7 GPIO_ACTIVE_HIGH>; 198 linux,default-trigger = "heartbeat"; 199 }; 200 201 d2 { 202 label = "d2"; 203 gpios = <&pioC 29 GPIO_ACTIVE_LOW>; 204 linux,default-trigger = "nand-disk"; 205 }; 206 }; 207 208 gpio_keys { 209 compatible = "gpio-keys"; 210 211 left_click { 212 label = "left_click"; 213 gpios = <&pioC 5 GPIO_ACTIVE_LOW>; 214 linux,code = <272>; 215 gpio-key,wakeup; 216 }; 217 218 right_click { 219 label = "right_click"; 220 gpios = <&pioC 4 GPIO_ACTIVE_LOW>; 221 linux,code = <273>; 222 gpio-key,wakeup; 223 }; 224 }; 225 226 i2c@0 { 227 status = "okay"; 228 229 24c512@50 { 230 compatible = "24c512"; 231 reg = <0x50>; 232 pagesize = <128>; 233 }; 234 }; 235};
|