1/*
2 * at91-sama5d3_xplained.dts - Device Tree file for the SAMA5D3 Xplained board
3 *
4 * Copyright (C) 2014 Atmel,
5 * 2014 Nicolas Ferre <nicolas.ferre@atmel.com>
6 *
7 * Licensed under GPLv2 or later.
8 */

--- 7 unchanged lines hidden (view full) ---

16 chosen {
17 bootargs = "console=ttyS0,115200";
18 };
19
20 memory {
21 reg = <0x20000000 0x10000000>;
22 };
23
24 ahb {
25 apb {
26 mmc0: mmc@f0000000 {
27 pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>;
28 status = "okay";
29 slot@0 {
30 reg = <0>;
31 bus-width = <8>;
32 cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>;
33 };
34 };
35
36 spi0: spi@f0004000 {
37 cs-gpios = <&pioD 13 0>;
38 status = "okay";
39 };
40
41 can0: can@f000c000 {
42 status = "okay";
43 };
44
45 i2c0: i2c@f0014000 {
46 status = "okay";
47 };
48
49 i2c1: i2c@f0018000 {
50 status = "okay";
51 };
52
53 macb0: ethernet@f0028000 {
54 phy-mode = "rgmii";
55 status = "okay";
56 };
57
58 usart0: serial@f001c000 {
59 status = "okay";
60 };
61
62 usart1: serial@f0020000 {
63 pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
64 status = "okay";
65 };

--- 8 unchanged lines hidden (view full) ---

74 slot@0 {
75 reg = <0>;
76 bus-width = <4>;
77 cd-gpios = <&pioE 1 GPIO_ACTIVE_HIGH>;
78 };
79 };
80
81 spi1: spi@f8008000 {
82 cs-gpios = <&pioC 25 0>, <0>, <0>, <&pioD 16 0>;
83 status = "okay";
84 };
85
86 adc0: adc@f8018000 {
87 pinctrl-0 = <
88 &pinctrl_adc0_adtrg
89 &pinctrl_adc0_ad0
90 &pinctrl_adc0_ad1

--- 6 unchanged lines hidden (view full) ---

97 &pinctrl_adc0_ad8
98 &pinctrl_adc0_ad9
99 >;
100 status = "okay";
101 };
102
103 i2c2: i2c@f801c000 {
104 dmas = <0>, <0>; /* Do not use DMA for i2c2 */
105 status = "okay";
106 };
107
108 macb1: ethernet@f802c000 {
109 phy-mode = "rmii";
110 status = "okay";
111 };
112
113 dbgu: serial@ffffee00 {
114 status = "okay";
115 };
116
117 pinctrl@fffff200 {
118 board {
119 pinctrl_mmc0_cd: mmc0_cd {
120 atmel,pins =
121 <AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
122 };
123
124 pinctrl_mmc1_cd: mmc1_cd {
125 atmel,pins =
126 <AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;

--- 103 unchanged lines hidden ---