1/*- 2 * Copyright (c) 1998,1999 S�ren Schmidt 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer, 10 * without modification, immediately at the beginning of the file. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. The name of the author may not be used to endorse or promote products 15 * derived from this software without specific prior written permission. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 27 *
| 1/*- 2 * Copyright (c) 1998,1999 S�ren Schmidt 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer, 10 * without modification, immediately at the beginning of the file. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. The name of the author may not be used to endorse or promote products 15 * derived from this software without specific prior written permission. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 27 *
|
28 * $FreeBSD: head/sys/dev/ata/ata-all.h 52918 1999-11-06 16:50:21Z sos $
| 28 * $FreeBSD: head/sys/dev/ata/ata-all.h 53029 1999-11-08 21:36:00Z sos $
|
29 */ 30 31/* ATA register defines */ 32#define ATA_DATA 0x00 /* data register */ 33#define ATA_ERROR 0x01 /* (R) error register */ 34#define ATA_E_ABORT 0x04 /* command aborted */ 35 36#define ATA_FEATURE 0x01 /* (W) feature register */ 37#define ATA_F_DMA 0x01 /* enable DMA */ 38#define ATA_F_OVL 0x02 /* enable overlap */ 39 40#define ATA_COUNT 0x02 /* (W) sector count */ 41#define ATA_IREASON 0x02 /* (R) interrupt reason */ 42#define ATA_I_CMD 0x01 /* cmd (1) | data (0) */ 43#define ATA_I_IN 0x02 /* read (1) | write (0) */ 44#define ATA_I_RELEASE 0x04 /* released bus (1) */ 45#define ATA_I_TAGMASK 0xf8 /* tag mask */ 46 47#define ATA_SECTOR 0x03 /* sector # */ 48#define ATA_CYL_LSB 0x04 /* cylinder# LSB */ 49#define ATA_CYL_MSB 0x05 /* cylinder# MSB */ 50#define ATA_DRIVE 0x06 /* Sector/Drive/Head register */ 51#define ATA_D_LBA 0x40 /* use LBA adressing */ 52#define ATA_D_IBM 0xa0 /* 512 byte sectors, ECC */ 53 54#define ATA_CMD 0x07 /* command register */ 55#define ATA_C_ATAPI_RESET 0x08 /* reset ATAPI device */ 56#define ATA_C_READ 0x20 /* read command */ 57#define ATA_C_WRITE 0x30 /* write command */ 58#define ATA_C_PACKET_CMD 0xa0 /* packet command */ 59#define ATA_C_ATAPI_IDENTIFY 0xa1 /* get ATAPI params*/ 60#define ATA_C_READ_MULTI 0xc4 /* read multi command */ 61#define ATA_C_WRITE_MULTI 0xc5 /* write multi command */ 62#define ATA_C_SET_MULTI 0xc6 /* set multi size command */ 63#define ATA_C_READ_DMA 0xc8 /* read w/DMA command */ 64#define ATA_C_WRITE_DMA 0xca /* write w/DMA command */ 65#define ATA_C_ATA_IDENTIFY 0xec /* get ATA params */ 66#define ATA_C_SETFEATURES 0xef /* features command */
| 29 */ 30 31/* ATA register defines */ 32#define ATA_DATA 0x00 /* data register */ 33#define ATA_ERROR 0x01 /* (R) error register */ 34#define ATA_E_ABORT 0x04 /* command aborted */ 35 36#define ATA_FEATURE 0x01 /* (W) feature register */ 37#define ATA_F_DMA 0x01 /* enable DMA */ 38#define ATA_F_OVL 0x02 /* enable overlap */ 39 40#define ATA_COUNT 0x02 /* (W) sector count */ 41#define ATA_IREASON 0x02 /* (R) interrupt reason */ 42#define ATA_I_CMD 0x01 /* cmd (1) | data (0) */ 43#define ATA_I_IN 0x02 /* read (1) | write (0) */ 44#define ATA_I_RELEASE 0x04 /* released bus (1) */ 45#define ATA_I_TAGMASK 0xf8 /* tag mask */ 46 47#define ATA_SECTOR 0x03 /* sector # */ 48#define ATA_CYL_LSB 0x04 /* cylinder# LSB */ 49#define ATA_CYL_MSB 0x05 /* cylinder# MSB */ 50#define ATA_DRIVE 0x06 /* Sector/Drive/Head register */ 51#define ATA_D_LBA 0x40 /* use LBA adressing */ 52#define ATA_D_IBM 0xa0 /* 512 byte sectors, ECC */ 53 54#define ATA_CMD 0x07 /* command register */ 55#define ATA_C_ATAPI_RESET 0x08 /* reset ATAPI device */ 56#define ATA_C_READ 0x20 /* read command */ 57#define ATA_C_WRITE 0x30 /* write command */ 58#define ATA_C_PACKET_CMD 0xa0 /* packet command */ 59#define ATA_C_ATAPI_IDENTIFY 0xa1 /* get ATAPI params*/ 60#define ATA_C_READ_MULTI 0xc4 /* read multi command */ 61#define ATA_C_WRITE_MULTI 0xc5 /* write multi command */ 62#define ATA_C_SET_MULTI 0xc6 /* set multi size command */ 63#define ATA_C_READ_DMA 0xc8 /* read w/DMA command */ 64#define ATA_C_WRITE_DMA 0xca /* write w/DMA command */ 65#define ATA_C_ATA_IDENTIFY 0xec /* get ATA params */ 66#define ATA_C_SETFEATURES 0xef /* features command */
|
67#define ATA_C_FEA_SETXFER 0x03 /* set transfer mode */
| 67#define ATA_C_F_SETXFER 0x03 /* set transfer mode */ 68#define ATA_C_F_ENAB_RCACHE 0xaa /* enable readahead cache */ 69#define ATA_C_F_ENAB_WCACHE 0x02 /* enable write cache */
|
68 69#define ATA_STATUS 0x07 /* status register */ 70#define ATA_S_ERROR 0x01 /* error */ 71#define ATA_S_INDEX 0x02 /* index */ 72#define ATA_S_CORR 0x04 /* data corrected */ 73#define ATA_S_DRQ 0x08 /* data request */ 74#define ATA_S_DSC 0x10 /* drive seek completed */ 75#define ATA_S_SERVICE 0x10 /* drive needs service */ 76#define ATA_S_DWF 0x20 /* drive write fault */ 77#define ATA_S_DMA 0x20 /* DMA ready */ 78#define ATA_S_READY 0x40 /* drive ready */ 79#define ATA_S_BUSY 0x80 /* busy */ 80 81#define ATA_ALTPORT 0x206 /* alternate Status register */ 82#define ATA_A_IDS 0x02 /* disable interrupts */ 83#define ATA_A_RESET 0x04 /* RESET controller */ 84#define ATA_A_4BIT 0x08 /* 4 head bits */ 85 86/* misc defines */ 87#define ATA_MASTER 0x00 88#define ATA_SLAVE 0x10 89#define ATA_IOSIZE 0x08 90#define ATA_OP_FINISHED 0x00 91#define ATA_OP_CONTINUES 0x01 92 93/* busmaster DMA related defines */ 94#define ATA_BM_OFFSET1 0x08 95#define ATA_DMA_ENTRIES 256 96#define ATA_DMA_EOT 0x80000000 97 98#define ATA_BMCMD_PORT 0x00 99#define ATA_BMCMD_START_STOP 0x01 100#define ATA_BMCMD_WRITE_READ 0x08 101 102#define ATA_BMSTAT_PORT 0x02 103#define ATA_BMSTAT_ACTIVE 0x01 104#define ATA_BMSTAT_ERROR 0x02 105#define ATA_BMSTAT_INTERRUPT 0x04 106#define ATA_BMSTAT_MASK 0x07 107#define ATA_BMSTAT_DMA_MASTER 0x20 108#define ATA_BMSTAT_DMA_SLAVE 0x40 109#define ATA_BMSTAT_DMA_SIMPLEX 0x80 110 111#define ATA_BMDTP_PORT 0x04 112 113/* structure for holding DMA address data */ 114struct ata_dmaentry { 115 u_int32_t base; 116 u_int32_t count; 117}; 118 119/* ATA device DMA access modes */ 120#define ATA_WDMA2 0x22 121#define ATA_UDMA2 0x42 122#define ATA_UDMA3 0x43 123#define ATA_UDMA4 0x44 124 125/* structure describing an ATA device */ 126struct ata_softc { 127 int32_t unit; /* unit on this controller */ 128 int32_t lun; /* logical unit # */ 129 struct device *dev; /* device handle */ 130 int32_t ioaddr; /* port addr */ 131 int32_t altioaddr; /* alternate port addr */ 132 int32_t bmaddr; /* bus master DMA port */ 133 void *dev_softc[2]; /* ptr to devices softc's */ 134 struct ata_dmaentry *dmatab[2]; /* DMA transfer tables */ 135 int32_t mode[2]; /* transfer mode for devices */ 136#define ATA_MODE_PIO 0x00 137#define ATA_MODE_WDMA2 0x01 138#define ATA_MODE_UDMA2 0x02 139#define ATA_MODE_UDMA3 0x04 140#define ATA_MODE_UDMA4 0x08 141 142 int32_t flags; /* controller flags */ 143#define ATA_DMA_ACTIVE 0x01 144#define ATA_ATAPI_DMA_RO 0x02 145 146 int32_t devices; /* what is present */ 147#define ATA_ATA_MASTER 0x01 148#define ATA_ATA_SLAVE 0x02 149#define ATA_ATAPI_MASTER 0x04 150#define ATA_ATAPI_SLAVE 0x08 151 152 u_int8_t status; /* last controller status */ 153 u_int8_t error; /* last controller error */ 154 int32_t active; /* active processing request */ 155#define ATA_IDLE 0x0 156#define ATA_IMMEDIATE 0x0 157#define ATA_WAIT_INTR 0x1 158#define ATA_WAIT_READY 0x2 159#define ATA_ACTIVE_ATA 0x3 160#define ATA_ACTIVE_ATAPI 0x4 161#define ATA_REINITING 0x5 162 163 TAILQ_HEAD(, ad_request) ata_queue; /* head of ATA queue */ 164 TAILQ_HEAD(, atapi_request) atapi_queue; /* head of ATAPI queue */ 165 void *running; /* currently running request */ 166#if NAPM > 0 167 struct apmhook resume_hook; /* hook for apm */ 168#endif 169 170}; 171 172/* array to hold all ata softc's */ 173extern struct ata_softc *atadevices[]; 174#define MAXATA 16 175 176/* public prototypes */ 177void ata_start(struct ata_softc *); 178void ata_reset(struct ata_softc *, int32_t *); 179int32_t ata_reinit(struct ata_softc *); 180int32_t ata_wait(struct ata_softc *, int32_t, u_int8_t); 181int32_t ata_command(struct ata_softc *, int32_t, u_int32_t, u_int32_t, u_int32_t, u_int32_t, u_int32_t, u_int32_t, int32_t); 182int32_t ata_dmainit(struct ata_softc *, int32_t, int32_t, int32_t, int32_t); 183int32_t ata_dmasetup(struct ata_softc *, int32_t, int8_t *, int32_t, int32_t); 184void ata_dmastart(struct ata_softc *); 185int32_t ata_dmastatus(struct ata_softc *); 186int32_t ata_dmadone(struct ata_softc *); 187int8_t *ata_mode2str(int32_t); 188void bswap(int8_t *, int32_t); 189void btrim(int8_t *, int32_t); 190void bpack(int8_t *, int8_t *, int32_t);
| 70 71#define ATA_STATUS 0x07 /* status register */ 72#define ATA_S_ERROR 0x01 /* error */ 73#define ATA_S_INDEX 0x02 /* index */ 74#define ATA_S_CORR 0x04 /* data corrected */ 75#define ATA_S_DRQ 0x08 /* data request */ 76#define ATA_S_DSC 0x10 /* drive seek completed */ 77#define ATA_S_SERVICE 0x10 /* drive needs service */ 78#define ATA_S_DWF 0x20 /* drive write fault */ 79#define ATA_S_DMA 0x20 /* DMA ready */ 80#define ATA_S_READY 0x40 /* drive ready */ 81#define ATA_S_BUSY 0x80 /* busy */ 82 83#define ATA_ALTPORT 0x206 /* alternate Status register */ 84#define ATA_A_IDS 0x02 /* disable interrupts */ 85#define ATA_A_RESET 0x04 /* RESET controller */ 86#define ATA_A_4BIT 0x08 /* 4 head bits */ 87 88/* misc defines */ 89#define ATA_MASTER 0x00 90#define ATA_SLAVE 0x10 91#define ATA_IOSIZE 0x08 92#define ATA_OP_FINISHED 0x00 93#define ATA_OP_CONTINUES 0x01 94 95/* busmaster DMA related defines */ 96#define ATA_BM_OFFSET1 0x08 97#define ATA_DMA_ENTRIES 256 98#define ATA_DMA_EOT 0x80000000 99 100#define ATA_BMCMD_PORT 0x00 101#define ATA_BMCMD_START_STOP 0x01 102#define ATA_BMCMD_WRITE_READ 0x08 103 104#define ATA_BMSTAT_PORT 0x02 105#define ATA_BMSTAT_ACTIVE 0x01 106#define ATA_BMSTAT_ERROR 0x02 107#define ATA_BMSTAT_INTERRUPT 0x04 108#define ATA_BMSTAT_MASK 0x07 109#define ATA_BMSTAT_DMA_MASTER 0x20 110#define ATA_BMSTAT_DMA_SLAVE 0x40 111#define ATA_BMSTAT_DMA_SIMPLEX 0x80 112 113#define ATA_BMDTP_PORT 0x04 114 115/* structure for holding DMA address data */ 116struct ata_dmaentry { 117 u_int32_t base; 118 u_int32_t count; 119}; 120 121/* ATA device DMA access modes */ 122#define ATA_WDMA2 0x22 123#define ATA_UDMA2 0x42 124#define ATA_UDMA3 0x43 125#define ATA_UDMA4 0x44 126 127/* structure describing an ATA device */ 128struct ata_softc { 129 int32_t unit; /* unit on this controller */ 130 int32_t lun; /* logical unit # */ 131 struct device *dev; /* device handle */ 132 int32_t ioaddr; /* port addr */ 133 int32_t altioaddr; /* alternate port addr */ 134 int32_t bmaddr; /* bus master DMA port */ 135 void *dev_softc[2]; /* ptr to devices softc's */ 136 struct ata_dmaentry *dmatab[2]; /* DMA transfer tables */ 137 int32_t mode[2]; /* transfer mode for devices */ 138#define ATA_MODE_PIO 0x00 139#define ATA_MODE_WDMA2 0x01 140#define ATA_MODE_UDMA2 0x02 141#define ATA_MODE_UDMA3 0x04 142#define ATA_MODE_UDMA4 0x08 143 144 int32_t flags; /* controller flags */ 145#define ATA_DMA_ACTIVE 0x01 146#define ATA_ATAPI_DMA_RO 0x02 147 148 int32_t devices; /* what is present */ 149#define ATA_ATA_MASTER 0x01 150#define ATA_ATA_SLAVE 0x02 151#define ATA_ATAPI_MASTER 0x04 152#define ATA_ATAPI_SLAVE 0x08 153 154 u_int8_t status; /* last controller status */ 155 u_int8_t error; /* last controller error */ 156 int32_t active; /* active processing request */ 157#define ATA_IDLE 0x0 158#define ATA_IMMEDIATE 0x0 159#define ATA_WAIT_INTR 0x1 160#define ATA_WAIT_READY 0x2 161#define ATA_ACTIVE_ATA 0x3 162#define ATA_ACTIVE_ATAPI 0x4 163#define ATA_REINITING 0x5 164 165 TAILQ_HEAD(, ad_request) ata_queue; /* head of ATA queue */ 166 TAILQ_HEAD(, atapi_request) atapi_queue; /* head of ATAPI queue */ 167 void *running; /* currently running request */ 168#if NAPM > 0 169 struct apmhook resume_hook; /* hook for apm */ 170#endif 171 172}; 173 174/* array to hold all ata softc's */ 175extern struct ata_softc *atadevices[]; 176#define MAXATA 16 177 178/* public prototypes */ 179void ata_start(struct ata_softc *); 180void ata_reset(struct ata_softc *, int32_t *); 181int32_t ata_reinit(struct ata_softc *); 182int32_t ata_wait(struct ata_softc *, int32_t, u_int8_t); 183int32_t ata_command(struct ata_softc *, int32_t, u_int32_t, u_int32_t, u_int32_t, u_int32_t, u_int32_t, u_int32_t, int32_t); 184int32_t ata_dmainit(struct ata_softc *, int32_t, int32_t, int32_t, int32_t); 185int32_t ata_dmasetup(struct ata_softc *, int32_t, int8_t *, int32_t, int32_t); 186void ata_dmastart(struct ata_softc *); 187int32_t ata_dmastatus(struct ata_softc *); 188int32_t ata_dmadone(struct ata_softc *); 189int8_t *ata_mode2str(int32_t); 190void bswap(int8_t *, int32_t); 191void btrim(int8_t *, int32_t); 192void bpack(int8_t *, int8_t *, int32_t);
|