1#!/bin/sh |
2# $Id: rc,v 1.193 1999/08/06 06:22:43 peter Exp $ |
3# From: @(#)rc 5.27 (Berkeley) 6/5/91 4 5# System startup script run by init on autoboot 6# or after single-user. 7# Output and error are redirected to console by init, 8# and the console is the controlling terminal. 9 10# Note that almost all the user-configurable behavior is no longer in --- 29 unchanged lines hidden (view full) --- 40 . /etc/rc.conf 41fi 42 43# Configure ccd devices. 44if [ -f /etc/ccd.conf ]; then 45 ccdconfig -C 46fi 47 |
48if [ "${start_vinum}" = "YES" ]; then |
49 vinum start |
50elif [ -n "${vinum_drives}" ]; then 51 vinum read ${vinum_drives} |
52fi 53 54swapon -a 55 |
56if [ "$1" = "autoboot" ]; then |
57 echo Automatic reboot in progress... 58 fsck -p 59 case $? in 60 0) 61 ;; 62 2) 63 exit 1 64 ;; --- 25 unchanged lines hidden (view full) --- 90 91set -T 92trap "echo 'Reboot interrupted'; exit 1" 3 93 94# root normally must be read/write, but if this is a BOOTP NFS 95# diskless boot it does not have to be. 96# 97 |
98if [ "${root_rw_mount}" != "NO" ]; then |
99 mount -u -o rw / 100fi 101 102if [ $? != 0 ]; then 103 echo "Filesystem mount failed, startup aborted" 104 exit 1 105fi 106 107umount -a >/dev/null 2>&1 108 |
109if [ "${early_nfs_mounts}" != "YES" ]; then |
110 mount -a -t nonfs 111else 112 mount -a 113fi 114if [ $? != 0 ]; then 115 echo "Filesystem mount failed, startup aborted" 116 exit 1 117fi 118 119# Run custom disk mounting function here 120# 121 |
122if [ -n "${diskless_mount}" ]; then 123 if [ -f "${diskless_mount}" ]; then 124 sh ${diskless_mount} |
125 fi 126fi 127 128adjkerntz -i 129 130clean_var() { 131 if [ ! -f /var/run/clean_var ]; then 132 rm -rf /var/run/* --- 10 unchanged lines hidden (view full) --- 143if [ -d /var/run -a -d /var/spool/lock -a -d /var/spool/uucp/.Temp ]; then 144 # network_pass1() *may* end up writing stuff to /var - we don't want to 145 # remove it immediately afterwards - *nor* to we want to fail to clean 146 # an nfs-mounted /var. 147 clean_var 148fi 149 150# Add additional swapfile, if configured. |
151if [ "${swapfile}" != "NO" -a -w "${swapfile}" -a -b /dev/vn0b ]; then 152 echo "Adding ${swapfile} as additional swap." 153 vnconfig /dev/vn0b ${swapfile} && swapon /dev/vn0b |
154fi 155 156# set sysctl variables early as we can 157if [ -f /etc/rc.sysctl ]; then 158 . /etc/rc.sysctl 159fi 160 161# configure serial devices --- 28 unchanged lines hidden (view full) --- 190# 191# Clearing /tmp at boot-time seems to have a long tradition. It doesn't 192# help in any way for long-living systems, and it might accidentally 193# clobber files you would rather like to have preserved after a crash 194# (if not using mfs /tmp anyway). 195# 196# See also the example of another cleanup policy in /etc/periodic/daily. 197# |
198if [ "${clear_tmp_enable}" = "YES" ]; then |
199 echo clearing /tmp 200 201 # prune quickly with one rm, then use find to clean up /tmp/[lq]* 202 # (not needed with mfs /tmp, but doesn't hurt there...) 203 (cd /tmp && rm -rf [a-km-pr-zA-Z]* && 204 find -d . ! -name . ! -name lost+found ! -name quota.user \ 205 ! -name quota.group -exec rm -rf -- {} \;) 206 --- 5 unchanged lines hidden (view full) --- 212 213# snapshot any kernel -c changes back to disk here <someday> 214# this has changed with ELF and /kernel.config. 215 216echo -n 'additional daemons:' 217# start system logging and name service (named needs to start before syslogd 218# if you don't have a /etc/resolv.conf) 219# |
220if [ "${syslogd_enable}" = "YES" ]; then |
221 # Transitional symlink (for the next couple of years :) until all 222 # binaries had a chance to move towards /var/run/log. 223 if [ ! -h /dev/log ] ; then 224 # might complain for r/o root f/s 225 ln -sf /var/run/log /dev/log 226 fi 227 228 rm -f /var/run/log 229 echo -n ' syslogd'; syslogd ${syslogd_flags} 230fi 231echo '.' 232 233# enable dumpdev so that savecore can see it 234# /var/crash should be a directory or a symbolic link 235# to the crash directory if core dumps are to be saved. |
236if [ "${dumpdev}" != "NO" -a -e ${dumpdev} -a -d /var/crash ]; then |
237 dumpon ${dumpdev} 238 echo -n checking for core dump... 239 savecore /var/crash 240fi 241 |
242if [ -n "${network_pass1_done}" ]; then |
243 network_pass2 244fi 245 246# Enable/Check the quotas (must be after ypbind if using NIS) |
247if [ "${enable_quotas}" = "YES" ]; then |
248 249 # Only check quotas if they have been previously enabled, and requested |
250 if [ "${check_quotas}" = "YES" ]; then |
251 echo -n 'checking quotas:' 252 quotacheck -a 253 echo ' done.' 254 fi 255 256 echo -n 'enabling quotas:' 257 quotaon -a 258 echo ' done.' 259fi 260 |
261if [ -n "${network_pass2_done}" ]; then |
262 network_pass3 263fi 264 265 266# build ps databases 267kvm_mkdb 268dev_mkdb 269 270# check the password temp/lock file 271if [ -f /etc/ptmp ] 272then 273 logger -s -p auth.err \ 274 "password file may be incorrect -- /etc/ptmp exists" 275fi 276 |
277if [ "${accounting_enable}" = "YES" -a -d /var/account ]; then |
278 echo 'turning on accounting' 279 if [ ! -e /var/account/acct ]; then 280 touch /var/account/acct 281 fi 282 accton /var/account/acct 283fi 284 285# Make shared lib searching a little faster. Leave /usr/lib first if you 286# add your own entries or you may come to grief. 287if [ -x /sbin/ldconfig ]; then |
288 if [ "`/usr/bin/objformat`" = "elf" ]; then |
289 _LDC=/usr/lib |
290 for i in ${ldconfig_paths}; do 291 if test -d ${i}; then 292 _LDC="${_LDC} ${i}" |
293 fi 294 done 295 echo 'setting ELF ldconfig path:' ${_LDC} 296 ldconfig -elf ${_LDC} 297 fi 298 299 # Legacy aout support for i386 only |
300 if [ "`sysctl -n hw.machine`" = "i386" ]; then |
301 # Default the a.out ldconfig path. 302 : ${ldconfig_paths_aout=${ldconfig_paths}} 303 _LDC=/usr/lib/aout |
304 for i in ${ldconfig_paths_aout}; do 305 if test -d ${i}; then 306 _LDC="${_LDC} ${i}" |
307 fi 308 done 309 echo 'setting a.out ldconfig path:' ${_LDC} 310 ldconfig -aout ${_LDC} 311 fi 312fi 313 314# Now start up miscellaneous daemons that don't belong anywhere else 315# 316echo -n starting standard daemons: |
317if [ "${inetd_enable}" != "NO" ]; then |
318 echo -n ' inetd'; inetd ${inetd_flags} 319fi 320 |
321if [ "${cron_enable}" != "NO" ]; then |
322 echo -n ' cron'; cron 323fi 324 |
325if [ "${lpd_enable}" = "YES" ]; then |
326 echo -n ' printer'; ${lpd_program} ${lpd_flags} 327fi 328 |
329if [ "${sendmail_enable}" = "YES" -a -r /etc/sendmail.cf ]; then |
330 echo -n ' sendmail'; /usr/sbin/sendmail ${sendmail_flags} 331fi 332 |
333if [ "${usbd_enable}" = "YES" ]; then |
334 echo -n ' usbd'; /usr/sbin/usbd ${usbd_flags} 335fi 336 337echo '.' 338 339# configure implementation specific stuff 340arch=`uname -m` 341if [ -f /etc/rc.${arch} ]; then 342 . /etc/rc.${arch} 343fi 344 345# Recover vi editor files. 346vibackup=`echo /var/tmp/vi.recover/vi.*` |
347if [ "${vibackup}" != '/var/tmp/vi.recover/vi.*' ]; then |
348 echo 'Recovering vi editor sessions' |
349 for i in ${vibackup}; do |
350 # Only test files that are readable. |
351 if test ! -r ${i}; then |
352 continue 353 fi 354 355 # Unmodified nvi editor backup files either have the 356 # execute bit set or are zero length. Delete them. |
357 if test -x ${i} -o ! -s ${i}; then 358 rm -f ${i} |
359 fi 360 done 361 362 # It is possible to get incomplete recovery files, if the editor 363 # crashes at the right time. 364 virecovery=`echo /var/tmp/vi.recover/recover.*` |
365 if [ "${virecovery}" != "/var/tmp/vi.recover/recover.*" ]; then 366 for i in ${virecovery}; do |
367 # Only test files that are readable. |
368 if test ! -r ${i}; then |
369 continue 370 fi 371 372 # Delete any recovery files that are zero length, 373 # corrupted, or that have no corresponding backup file. 374 # Else send mail to the user. |
375 recfile=`awk '/^X-vi-recover-path:/{print $2}' < ${i}` 376 if test -n "${recfile}" -a -s "${recfile}"; then 377 sendmail -t < ${i} |
378 else |
379 rm -f ${i} |
380 fi 381 done 382 fi 383fi 384 385# make a bounds file for msgs(1) if there isn't one already 386if [ ! -f /var/msgs/bounds ]; then 387 echo 0 > /var/msgs/bounds 388fi 389 390# for each valid dir in $local_startup, search for init scripts matching *.sh |
391if [ "${local_startup}" != "NO" ]; then |
392 echo -n 'Local package initialization:' 393 for dir in ${local_startup}; do 394 [ -d ${dir} ] && for script in ${dir}/*.sh; do 395 [ -x ${script} ] && \ 396 (set -T ; trap 'exit 1' 2 ; ${script} start) 397 done 398 done 399 echo . 400fi 401 |
402if [ "${update_motd}" != "NO" ]; then |
403 T=`mktemp /tmp/_motd.XXXXXX` 404 if [ $? -eq 0 ]; then |
405 uname -v | sed -e 's,^\([^#]*\) #\(.* [1-2][0-9][0-9][0-9]\).*/\([^\]*\) $,\1 (\3) #\2,' > ${T} 406 awk '{if (NR == 1) {if ($1 == "FreeBSD") {next} else {print "\n"$0}} else {print}}' < /etc/motd >> ${T} 407 cmp -s ${T} /etc/motd || { 408 cp ${T} /etc/motd |
409 chmod 644 /etc/motd 410 } |
411 rm -f ${T} |
412 fi 413fi 414 415# Run rc.devfs if present to customize devfs 416[ -f /etc/rc.devfs ] && sh /etc/rc.devfs 417 418# Do traditional (but rather obsolete) rc.local file if it exists. If you 419# use this file and want to make it programmatic, source /etc/defaults/rc.conf --- 12 unchanged lines hidden (view full) --- 432if [ -f /etc/rc.local ]; then 433 echo -n 'starting local daemons:' 434 sh /etc/rc.local 435 echo '.' 436fi 437 438# Raise kernel security level. This should be done only after `fsck' has 439# repaired local file systems if you want the securelevel to be greater than 1. |
440if [ "${kern_securelevel_enable}" = "YES" -a "${kern_securelevel}" -ge 0 ]; |
441then 442 echo 'Raising kernel security level' 443 sysctl -w kern.securelevel=${kern_securelevel} 444fi 445 446date 447exit 0 |