1# $FreeBSD: head/etc/devd.conf 123626 2003-12-18 04:39:57Z njl $
2#
3# Refer to devd.conf(5) and devd(8) man pages for the details on how to
4# run and configure devd.
5#
6
7# NB: All regular expressions have an implicit ^$ around them.
8# NB: device-name is shorthand for 'match device-name'
9
10options {
11 # Each directory directive adds a directory the list of directories
12 # that we scan for files. Files are read-in in the order that they
13 # are returned from readdir(3). The rule-sets are combined to
14 # create a DFA that's used to match events to actions.
15 directory "/etc/devd";
16 directory "/usr/local/etc/devd";
17 pid-file "/var/run/devd.pid";
18
19 # Setup some shorthand for regex that we use later in the file.
20 set ethernet-nic-regex
21 "(an|ar|ath|aue|awi|bfe|bge|cm|cnw|cs|cue|dc|de|ed|el|em|ep|\
22 ex|fe|fxp|gem|gx|hme|ie|kue|lge|lnc|my|nge|pcn|ray|re|rl|rue|\
23 sf|sis|sk|sn|snc|ste|ti|tl|tx|txp|vr|vx|wb|wi|xe|xl)[0-9]+";
24 set scsi-controller-regex
25 "(adv|advw|aic|aha|ahb|ahc|ahd|bt|ct|iir|isp|mly|mpt|ncv|nsp|\
26 stg|sym|wds)[0-9]+";
27};
28
29# Note that the attach/detach with the highest value wins, so that one can
30# override these general rules.
31
32#
33# For ethernet like devices, the default is to run dhclient. Due to
34# a historical accident, the name of this script it called pccard_ether
35#
36attach 0 {
37 device-name "$ethernet-nic-regex";
38 action "/etc/pccard_ether $device-name start";
39};
40
41detach 0 {
42 device-name "$ethernet-nic-regex";
43 action "/etc/pccard_ether $device-name stop";
44};
45
46# An entry like this might be in a different file, but is included here
47# as an example of how to override things. Normally 'ed50' would match
48# the above attach/detach stuff, but the value of 100 makes it
49# ed50 is hard wired to 1.2.3.4
50attach 100 {
51 device-name "ed50";
52 action "ifconfig $device-name inet 1.2.3.4 netmask 0xffff0000";
53};
54detach 100 {
55 device-name "ed50";
56};
57
58#
59# Rescan scsi device-names on attach, but not detach.
60#
61attach 0 {
62 device-name "$scsi-controller-regex";
63 action "camcontrol rescan all";
64};
65
66# Don't even try to second guess what to do about drivers that don't
67# match here. Instead, pass it off to syslog. Commented out for the
68# moment, as pnpinfo isn't set in devd yet
69nomatch 0 {
70# action "logger Unknown device: $pnpinfo $location $bus";
71};
72
73# Switch power profiles when the AC line state changes
74notify 10 {
75 match "system" "ACPI";
76 match "subsystem" "ACAD";
77 action "/etc/rc.d/power_profile $notify";
78};
79
80/* EXAMPLES TO END OF FILE
81
82# The following might be an example of something that a vendor might
83# install if you were to add their device. This might reside in
84# /usr/local/etc/devd/deqna.conf. A deqna is, in this hypothetical
85# example, a pccard ethernet-like device. Students of history may
86# know other devices by this name, and will get the in-jokes in this
87# entry.
88nomatch 10 {
89 match "bus" "pccard[0-9]+";
90 match "manufacturer" "0x1234";
91 match "product" "0x2323";
92 action "kldload if_deqna";
93};
94attach 10 {
95 device-name "deqna[0-9]+";
96 action "/etc/pccard_ether $device-name start";
97};
98detach 10 {
99 device-name "deqna[0-9]+";
100 action "/etc/pccard_ether $device-name stop";
101};
102
103# Examples of notify hooks. A notify is a generic way for a kernel
104# subsystem to send event notification to userland.
105#
106# Here are some examples of ACPI notify handlers. ACPI subsystems that
107# generate notifies include the AC adapter, power/sleep buttons,
108# control method batteries, lid switch, and thermal zones.
109#
110# Information returned is not always the same as the ACPI notify
111# events. See the ACPI specification for more information about
112# notifies. Here is the information returned for each subsystem:
113#
114# ACAD: AC line state (0 is offline, 1 is online)
115# Button: Button pressed (0 for power, 1 for sleep)
116# CMBAT: ACPI battery events
117# Lid: Lid state (0 is closed, 1 is open)
118# Thermal: ACPI thermal zone events
119#
120# This example calls a script when the AC state changes, passing the
121# notify value as the first argument. If the state is 0x00, it might
122# call some sysctls to implement economy mode. If 0x01, it might set
123# the mode to performance.
124notify 10 {
125 match "system" "ACPI";
126 match "subsystem" "ACAD";
127 action "/etc/acpi_ac $notify";
128};
129*/
2#
3# Refer to devd.conf(5) and devd(8) man pages for the details on how to
4# run and configure devd.
5#
6
7# NB: All regular expressions have an implicit ^$ around them.
8# NB: device-name is shorthand for 'match device-name'
9
10options {
11 # Each directory directive adds a directory the list of directories
12 # that we scan for files. Files are read-in in the order that they
13 # are returned from readdir(3). The rule-sets are combined to
14 # create a DFA that's used to match events to actions.
15 directory "/etc/devd";
16 directory "/usr/local/etc/devd";
17 pid-file "/var/run/devd.pid";
18
19 # Setup some shorthand for regex that we use later in the file.
20 set ethernet-nic-regex
21 "(an|ar|ath|aue|awi|bfe|bge|cm|cnw|cs|cue|dc|de|ed|el|em|ep|\
22 ex|fe|fxp|gem|gx|hme|ie|kue|lge|lnc|my|nge|pcn|ray|re|rl|rue|\
23 sf|sis|sk|sn|snc|ste|ti|tl|tx|txp|vr|vx|wb|wi|xe|xl)[0-9]+";
24 set scsi-controller-regex
25 "(adv|advw|aic|aha|ahb|ahc|ahd|bt|ct|iir|isp|mly|mpt|ncv|nsp|\
26 stg|sym|wds)[0-9]+";
27};
28
29# Note that the attach/detach with the highest value wins, so that one can
30# override these general rules.
31
32#
33# For ethernet like devices, the default is to run dhclient. Due to
34# a historical accident, the name of this script it called pccard_ether
35#
36attach 0 {
37 device-name "$ethernet-nic-regex";
38 action "/etc/pccard_ether $device-name start";
39};
40
41detach 0 {
42 device-name "$ethernet-nic-regex";
43 action "/etc/pccard_ether $device-name stop";
44};
45
46# An entry like this might be in a different file, but is included here
47# as an example of how to override things. Normally 'ed50' would match
48# the above attach/detach stuff, but the value of 100 makes it
49# ed50 is hard wired to 1.2.3.4
50attach 100 {
51 device-name "ed50";
52 action "ifconfig $device-name inet 1.2.3.4 netmask 0xffff0000";
53};
54detach 100 {
55 device-name "ed50";
56};
57
58#
59# Rescan scsi device-names on attach, but not detach.
60#
61attach 0 {
62 device-name "$scsi-controller-regex";
63 action "camcontrol rescan all";
64};
65
66# Don't even try to second guess what to do about drivers that don't
67# match here. Instead, pass it off to syslog. Commented out for the
68# moment, as pnpinfo isn't set in devd yet
69nomatch 0 {
70# action "logger Unknown device: $pnpinfo $location $bus";
71};
72
73# Switch power profiles when the AC line state changes
74notify 10 {
75 match "system" "ACPI";
76 match "subsystem" "ACAD";
77 action "/etc/rc.d/power_profile $notify";
78};
79
80/* EXAMPLES TO END OF FILE
81
82# The following might be an example of something that a vendor might
83# install if you were to add their device. This might reside in
84# /usr/local/etc/devd/deqna.conf. A deqna is, in this hypothetical
85# example, a pccard ethernet-like device. Students of history may
86# know other devices by this name, and will get the in-jokes in this
87# entry.
88nomatch 10 {
89 match "bus" "pccard[0-9]+";
90 match "manufacturer" "0x1234";
91 match "product" "0x2323";
92 action "kldload if_deqna";
93};
94attach 10 {
95 device-name "deqna[0-9]+";
96 action "/etc/pccard_ether $device-name start";
97};
98detach 10 {
99 device-name "deqna[0-9]+";
100 action "/etc/pccard_ether $device-name stop";
101};
102
103# Examples of notify hooks. A notify is a generic way for a kernel
104# subsystem to send event notification to userland.
105#
106# Here are some examples of ACPI notify handlers. ACPI subsystems that
107# generate notifies include the AC adapter, power/sleep buttons,
108# control method batteries, lid switch, and thermal zones.
109#
110# Information returned is not always the same as the ACPI notify
111# events. See the ACPI specification for more information about
112# notifies. Here is the information returned for each subsystem:
113#
114# ACAD: AC line state (0 is offline, 1 is online)
115# Button: Button pressed (0 for power, 1 for sleep)
116# CMBAT: ACPI battery events
117# Lid: Lid state (0 is closed, 1 is open)
118# Thermal: ACPI thermal zone events
119#
120# This example calls a script when the AC state changes, passing the
121# notify value as the first argument. If the state is 0x00, it might
122# call some sysctls to implement economy mode. If 0x01, it might set
123# the mode to performance.
124notify 10 {
125 match "system" "ACPI";
126 match "subsystem" "ACAD";
127 action "/etc/acpi_ac $notify";
128};
129*/