1/*-
2 * Copyright (c) 2008, 2009 Yahoo!, Inc.
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * 3. The names of the authors may not be used to endorse or promote
14 * products derived from this software without specific prior written
15 * permission.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
27 * SUCH DAMAGE.
28 *
| 1/*-
2 * Copyright (c) 2008, 2009 Yahoo!, Inc.
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * 3. The names of the authors may not be used to endorse or promote
14 * products derived from this software without specific prior written
15 * permission.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
27 * SUCH DAMAGE.
28 *
|
29 * $FreeBSD: head/usr.sbin/mfiutil/mfiutil.c 237259 2012-06-19 06:18:37Z eadler $
| 29 * $FreeBSD: head/usr.sbin/mfiutil/mfiutil.c 237260 2012-06-19 06:18:42Z eadler $
|
30 */
31
32#include <sys/errno.h>
33#include <err.h>
34#include <stdio.h>
35#include <stdlib.h>
36#include <string.h>
37#include <unistd.h>
38#include "mfiutil.h"
39
40SET_DECLARE(MFI_DATASET(top), struct mfiutil_command);
41
42MFI_TABLE(top, start);
43MFI_TABLE(top, stop);
44MFI_TABLE(top, abort);
45
46int mfi_unit;
47
48u_int mfi_opts;
49
50static void
51usage(void)
52{
53
54 fprintf(stderr, "usage: mfiutil [-de] [-u unit] <command> ...\n\n");
55 fprintf(stderr, "Commands include:\n");
56 fprintf(stderr, " version\n");
57 fprintf(stderr, " show adapter - display controller information\n");
58 fprintf(stderr, " show battery - display battery information\n");
59 fprintf(stderr, " show config - display RAID configuration\n");
60 fprintf(stderr, " show drives - list physical drives\n");
61 fprintf(stderr, " show events - display event log\n");
62 fprintf(stderr, " show firmware - list firmware images\n");
63 fprintf(stderr, " show logstate - display event log sequence numbers\n");
64 fprintf(stderr, " show volumes - list logical volumes\n");
65 fprintf(stderr, " show patrol - display patrol read status\n");
66 fprintf(stderr, " show progress - display status of active operations\n");
67 fprintf(stderr, " fail <drive> - fail a physical drive\n");
68 fprintf(stderr, " good <drive> - mark a bad physical drive as good\n");
69 fprintf(stderr, " rebuild <drive> - mark failed drive ready for rebuild\n");
70 fprintf(stderr, " drive progress <drive> - display status of active operations\n");
71 fprintf(stderr, " drive clear <drive> <start|stop> - clear a drive with all 0x00\n");
72 fprintf(stderr, " start rebuild <drive>\n");
73 fprintf(stderr, " abort rebuild <drive>\n");
74 fprintf(stderr, " locate <drive> <on|off> - toggle drive LED\n");
75 fprintf(stderr, " cache <volume> [command [setting]]\n");
76 fprintf(stderr, " name <volume> <name>\n");
77 fprintf(stderr, " volume progress <volume> - display status of active operations\n");
78 fprintf(stderr, " clear - clear volume configuration\n");
79 fprintf(stderr, " create <type> [-v] <drive>[,<drive>[,...]] [<drive>[,<drive>[,...]]\n");
80 fprintf(stderr, " delete <volume>\n");
81 fprintf(stderr, " add <drive> [volume] - add a hot spare\n");
82 fprintf(stderr, " remove <drive> - remove a hot spare\n");
83 fprintf(stderr, " patrol <disable|auto|manual> [interval [start]]\n");
84 fprintf(stderr, " start patrol - start a patrol read\n");
85 fprintf(stderr, " stop patrol - stop a patrol read\n");
86 fprintf(stderr, " flash <firmware>\n");
87#ifdef DEBUG
88 fprintf(stderr, " debug - debug 'show config'\n");
89 fprintf(stderr, " dump - display 'saved' config\n");
90#endif
91 exit(1);
92}
93
94static int
| 30 */
31
32#include <sys/errno.h>
33#include <err.h>
34#include <stdio.h>
35#include <stdlib.h>
36#include <string.h>
37#include <unistd.h>
38#include "mfiutil.h"
39
40SET_DECLARE(MFI_DATASET(top), struct mfiutil_command);
41
42MFI_TABLE(top, start);
43MFI_TABLE(top, stop);
44MFI_TABLE(top, abort);
45
46int mfi_unit;
47
48u_int mfi_opts;
49
50static void
51usage(void)
52{
53
54 fprintf(stderr, "usage: mfiutil [-de] [-u unit] <command> ...\n\n");
55 fprintf(stderr, "Commands include:\n");
56 fprintf(stderr, " version\n");
57 fprintf(stderr, " show adapter - display controller information\n");
58 fprintf(stderr, " show battery - display battery information\n");
59 fprintf(stderr, " show config - display RAID configuration\n");
60 fprintf(stderr, " show drives - list physical drives\n");
61 fprintf(stderr, " show events - display event log\n");
62 fprintf(stderr, " show firmware - list firmware images\n");
63 fprintf(stderr, " show logstate - display event log sequence numbers\n");
64 fprintf(stderr, " show volumes - list logical volumes\n");
65 fprintf(stderr, " show patrol - display patrol read status\n");
66 fprintf(stderr, " show progress - display status of active operations\n");
67 fprintf(stderr, " fail <drive> - fail a physical drive\n");
68 fprintf(stderr, " good <drive> - mark a bad physical drive as good\n");
69 fprintf(stderr, " rebuild <drive> - mark failed drive ready for rebuild\n");
70 fprintf(stderr, " drive progress <drive> - display status of active operations\n");
71 fprintf(stderr, " drive clear <drive> <start|stop> - clear a drive with all 0x00\n");
72 fprintf(stderr, " start rebuild <drive>\n");
73 fprintf(stderr, " abort rebuild <drive>\n");
74 fprintf(stderr, " locate <drive> <on|off> - toggle drive LED\n");
75 fprintf(stderr, " cache <volume> [command [setting]]\n");
76 fprintf(stderr, " name <volume> <name>\n");
77 fprintf(stderr, " volume progress <volume> - display status of active operations\n");
78 fprintf(stderr, " clear - clear volume configuration\n");
79 fprintf(stderr, " create <type> [-v] <drive>[,<drive>[,...]] [<drive>[,<drive>[,...]]\n");
80 fprintf(stderr, " delete <volume>\n");
81 fprintf(stderr, " add <drive> [volume] - add a hot spare\n");
82 fprintf(stderr, " remove <drive> - remove a hot spare\n");
83 fprintf(stderr, " patrol <disable|auto|manual> [interval [start]]\n");
84 fprintf(stderr, " start patrol - start a patrol read\n");
85 fprintf(stderr, " stop patrol - stop a patrol read\n");
86 fprintf(stderr, " flash <firmware>\n");
87#ifdef DEBUG
88 fprintf(stderr, " debug - debug 'show config'\n");
89 fprintf(stderr, " dump - display 'saved' config\n");
90#endif
91 exit(1);
92}
93
94static int
|
95version(int ac, char **av)
| 95version(int ac __unused, char **av __unused)
|
96{
97
98 printf("mfiutil version 1.0.14");
99#ifdef DEBUG
100 printf(" (DEBUG)");
101#endif
102 printf("\n");
103 return (0);
104}
105MFI_COMMAND(top, version, version);
106
107int
108main(int ac, char **av)
109{
110 struct mfiutil_command **cmd;
111 int ch;
112
113 while ((ch = getopt(ac, av, "deu:")) != -1) {
114 switch (ch) {
115 case 'd':
116 mfi_opts |= MFI_DNAME_DEVICE_ID;
117 break;
118 case 'e':
119 mfi_opts |= MFI_DNAME_ES;
120 break;
121 case 'u':
122 mfi_unit = atoi(optarg);
123 break;
124 case '?':
125 usage();
126 }
127 }
128
129 av += optind;
130 ac -= optind;
131
132 /* getopt() eats av[0], so we can't use mfi_table_handler() directly. */
133 if (ac == 0)
134 usage();
135
136 SET_FOREACH(cmd, MFI_DATASET(top)) {
137 if (strcmp((*cmd)->name, av[0]) == 0) {
138 if ((*cmd)->handler(ac, av))
139 return (1);
140 else
141 return (0);
142 }
143 }
144 warnx("Unknown command %s.", av[0]);
145 return (1);
146}
| 96{
97
98 printf("mfiutil version 1.0.14");
99#ifdef DEBUG
100 printf(" (DEBUG)");
101#endif
102 printf("\n");
103 return (0);
104}
105MFI_COMMAND(top, version, version);
106
107int
108main(int ac, char **av)
109{
110 struct mfiutil_command **cmd;
111 int ch;
112
113 while ((ch = getopt(ac, av, "deu:")) != -1) {
114 switch (ch) {
115 case 'd':
116 mfi_opts |= MFI_DNAME_DEVICE_ID;
117 break;
118 case 'e':
119 mfi_opts |= MFI_DNAME_ES;
120 break;
121 case 'u':
122 mfi_unit = atoi(optarg);
123 break;
124 case '?':
125 usage();
126 }
127 }
128
129 av += optind;
130 ac -= optind;
131
132 /* getopt() eats av[0], so we can't use mfi_table_handler() directly. */
133 if (ac == 0)
134 usage();
135
136 SET_FOREACH(cmd, MFI_DATASET(top)) {
137 if (strcmp((*cmd)->name, av[0]) == 0) {
138 if ((*cmd)->handler(ac, av))
139 return (1);
140 else
141 return (0);
142 }
143 }
144 warnx("Unknown command %s.", av[0]);
145 return (1);
146}
|