1/* 2 * client.c 3 * 4 * Copyright (c) 2004 Maksim Yevmenkin <m_evmenkin@yahoo.com> 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 * 28 * $Id: client.c,v 1.6 2004/02/26 21:57:55 max Exp $
| 1/* 2 * client.c 3 * 4 * Copyright (c) 2004 Maksim Yevmenkin <m_evmenkin@yahoo.com> 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 * 28 * $Id: client.c,v 1.6 2004/02/26 21:57:55 max Exp $
|
30 */ 31 32#include <sys/queue.h> 33#include <assert.h> 34#include <bluetooth.h> 35#include <errno.h> 36#include <fcntl.h> 37#include <stdio.h> 38#include <stdlib.h> 39#include <string.h> 40#include <syslog.h> 41#include <unistd.h> 42#include <usbhid.h> 43#include "bthidd.h" 44#include "bthid_config.h" 45 46static int client_socket(bdaddr_p bdaddr, int psm); 47 48/* 49 * Get next config entry and create outbound connection (if required) 50 * 51 * XXX Do only one device at a time. At least one of my devices (3COM 52 * Bluetooth PCCARD) rejects Create_Connection command if another 53 * Create_Connection command is still pending. Weird... 54 */ 55 56static int connect_in_progress = 0; 57 58int 59client_rescan(bthid_server_p srv) 60{ 61 static hid_device_p d = NULL; 62 bthid_session_p s = NULL; 63 64 assert(srv != NULL); 65 66 if (connect_in_progress) 67 return (0); /* another connect is still pending */ 68 69 d = get_next_hid_device(d); 70 if (d == NULL) 71 return (0); /* XXX should not happen? empty config? */ 72 73 if ((s = session_by_bdaddr(srv, &d->bdaddr)) != NULL) 74 return (0); /* session already active */ 75 76 if (!d->new_device) { 77 if (d->reconnect_initiate) 78 return (0); /* device will initiate reconnect */ 79 } 80 81 syslog(LOG_NOTICE, "Opening outbound session for %s " \ 82 "(new_device=%d, reconnect_initiate=%d)", 83 bt_ntoa(&d->bdaddr, NULL), d->new_device, d->reconnect_initiate); 84 85 if ((s = session_open(srv, &d->bdaddr)) == NULL) { 86 syslog(LOG_CRIT, "Could not open outbound session for %s. " \ 87 "Not enough memory", bt_ntoa(&d->bdaddr, NULL)); 88 return (-1); 89 } 90 91 /* Open control channel */ 92 s->ctrl = client_socket(&s->bdaddr, d->control_psm); 93 if (s->ctrl < 0) { 94 syslog(LOG_ERR, "Could not open control channel to %s. %s (%d)", 95 bt_ntoa(&s->bdaddr, NULL), strerror(errno), errno); 96 session_close(s); 97 return (-1); 98 } 99 100 s->state = W4CTRL; 101 102 FD_SET(s->ctrl, &srv->wfdset); 103 if (s->ctrl > srv->maxfd) 104 srv->maxfd = s->ctrl; 105 106 connect_in_progress = 1; 107 108 return (0); 109} 110 111/* 112 * Process connect on the socket 113 */ 114 115int 116client_connect(bthid_server_p srv, int fd) 117{ 118 bthid_session_p s = NULL; 119 hid_device_p d = NULL; 120 int error, len; 121 122 assert(srv != NULL); 123 assert(fd >= 0); 124 125 s = session_by_fd(srv, fd); 126 assert(s != NULL); 127 128 d = get_hid_device(&s->bdaddr); 129 assert(d != NULL); 130 131 error = 0; 132 len = sizeof(error); 133 if (getsockopt(fd, SOL_SOCKET, SO_ERROR, &error, &len) < 0) { 134 syslog(LOG_ERR, "Could not get socket error for %s. %s (%d)", 135 bt_ntoa(&s->bdaddr, NULL), strerror(errno), errno); 136 session_close(s); 137 connect_in_progress = 0; 138 139 return (-1); 140 } 141 142 if (error != 0) { 143 syslog(LOG_ERR, "Could not connect to %s. %s (%d)", 144 bt_ntoa(&s->bdaddr, NULL), strerror(error), error); 145 session_close(s); 146 connect_in_progress = 0; 147 148 return (0); 149 } 150 151 switch (s->state) { 152 case W4CTRL: /* Control channel is open */ 153 assert(s->ctrl == fd); 154 assert(s->intr == -1); 155 156 /* Open interrupt channel */ 157 s->intr = client_socket(&s->bdaddr, d->interrupt_psm); 158 if (s->intr < 0) { 159 syslog(LOG_ERR, "Could not open interrupt channel " \ 160 "to %s. %s (%d)", bt_ntoa(&s->bdaddr, NULL), 161 strerror(errno), errno); 162 session_close(s); 163 connect_in_progress = 0; 164 165 return (-1); 166 } 167 168 s->state = W4INTR; 169 170 FD_SET(s->intr, &srv->wfdset); 171 if (s->intr > srv->maxfd) 172 srv->maxfd = s->intr; 173 174 d->new_device = 0; /* reset new device flag */ 175 write_hids_file(); 176 break; 177 178 case W4INTR: /* Interrupt channel is open */ 179 assert(s->ctrl != -1); 180 assert(s->intr == fd); 181 182 s->state = OPEN; 183 connect_in_progress = 0; 184 break; 185 186 default: 187 assert(0); 188 break; 189 } 190 191 /* Move fd to from the write fd set into read fd set */ 192 FD_CLR(fd, &srv->wfdset); 193 FD_SET(fd, &srv->rfdset); 194 195 return (0); 196} 197 198/* 199 * Create bound non-blocking socket and initiate connect 200 */ 201 202static int 203client_socket(bdaddr_p bdaddr, int psm) 204{ 205 struct sockaddr_l2cap l2addr; 206 int s, m; 207 208 s = socket(PF_BLUETOOTH, SOCK_SEQPACKET, BLUETOOTH_PROTO_L2CAP); 209 if (s < 0) 210 return (-1); 211 212 m = fcntl(s, F_GETFL); 213 if (m < 0) { 214 close(s); 215 return (-1); 216 } 217 218 if (fcntl(s, F_SETFL, (m|O_NONBLOCK)) < 0) { 219 close(s); 220 return (-1); 221 } 222 223 l2addr.l2cap_len = sizeof(l2addr); 224 l2addr.l2cap_family = AF_BLUETOOTH; 225 memcpy(&l2addr.l2cap_bdaddr, NG_HCI_BDADDR_ANY, sizeof(l2addr.l2cap_bdaddr)); 226 l2addr.l2cap_psm = 0; 227 228 if (bind(s, (struct sockaddr *) &l2addr, sizeof(l2addr)) < 0) { 229 close(s); 230 return (-1); 231 } 232 233 memcpy(&l2addr.l2cap_bdaddr, bdaddr, sizeof(l2addr.l2cap_bdaddr));
| 30 */ 31 32#include <sys/queue.h> 33#include <assert.h> 34#include <bluetooth.h> 35#include <errno.h> 36#include <fcntl.h> 37#include <stdio.h> 38#include <stdlib.h> 39#include <string.h> 40#include <syslog.h> 41#include <unistd.h> 42#include <usbhid.h> 43#include "bthidd.h" 44#include "bthid_config.h" 45 46static int client_socket(bdaddr_p bdaddr, int psm); 47 48/* 49 * Get next config entry and create outbound connection (if required) 50 * 51 * XXX Do only one device at a time. At least one of my devices (3COM 52 * Bluetooth PCCARD) rejects Create_Connection command if another 53 * Create_Connection command is still pending. Weird... 54 */ 55 56static int connect_in_progress = 0; 57 58int 59client_rescan(bthid_server_p srv) 60{ 61 static hid_device_p d = NULL; 62 bthid_session_p s = NULL; 63 64 assert(srv != NULL); 65 66 if (connect_in_progress) 67 return (0); /* another connect is still pending */ 68 69 d = get_next_hid_device(d); 70 if (d == NULL) 71 return (0); /* XXX should not happen? empty config? */ 72 73 if ((s = session_by_bdaddr(srv, &d->bdaddr)) != NULL) 74 return (0); /* session already active */ 75 76 if (!d->new_device) { 77 if (d->reconnect_initiate) 78 return (0); /* device will initiate reconnect */ 79 } 80 81 syslog(LOG_NOTICE, "Opening outbound session for %s " \ 82 "(new_device=%d, reconnect_initiate=%d)", 83 bt_ntoa(&d->bdaddr, NULL), d->new_device, d->reconnect_initiate); 84 85 if ((s = session_open(srv, &d->bdaddr)) == NULL) { 86 syslog(LOG_CRIT, "Could not open outbound session for %s. " \ 87 "Not enough memory", bt_ntoa(&d->bdaddr, NULL)); 88 return (-1); 89 } 90 91 /* Open control channel */ 92 s->ctrl = client_socket(&s->bdaddr, d->control_psm); 93 if (s->ctrl < 0) { 94 syslog(LOG_ERR, "Could not open control channel to %s. %s (%d)", 95 bt_ntoa(&s->bdaddr, NULL), strerror(errno), errno); 96 session_close(s); 97 return (-1); 98 } 99 100 s->state = W4CTRL; 101 102 FD_SET(s->ctrl, &srv->wfdset); 103 if (s->ctrl > srv->maxfd) 104 srv->maxfd = s->ctrl; 105 106 connect_in_progress = 1; 107 108 return (0); 109} 110 111/* 112 * Process connect on the socket 113 */ 114 115int 116client_connect(bthid_server_p srv, int fd) 117{ 118 bthid_session_p s = NULL; 119 hid_device_p d = NULL; 120 int error, len; 121 122 assert(srv != NULL); 123 assert(fd >= 0); 124 125 s = session_by_fd(srv, fd); 126 assert(s != NULL); 127 128 d = get_hid_device(&s->bdaddr); 129 assert(d != NULL); 130 131 error = 0; 132 len = sizeof(error); 133 if (getsockopt(fd, SOL_SOCKET, SO_ERROR, &error, &len) < 0) { 134 syslog(LOG_ERR, "Could not get socket error for %s. %s (%d)", 135 bt_ntoa(&s->bdaddr, NULL), strerror(errno), errno); 136 session_close(s); 137 connect_in_progress = 0; 138 139 return (-1); 140 } 141 142 if (error != 0) { 143 syslog(LOG_ERR, "Could not connect to %s. %s (%d)", 144 bt_ntoa(&s->bdaddr, NULL), strerror(error), error); 145 session_close(s); 146 connect_in_progress = 0; 147 148 return (0); 149 } 150 151 switch (s->state) { 152 case W4CTRL: /* Control channel is open */ 153 assert(s->ctrl == fd); 154 assert(s->intr == -1); 155 156 /* Open interrupt channel */ 157 s->intr = client_socket(&s->bdaddr, d->interrupt_psm); 158 if (s->intr < 0) { 159 syslog(LOG_ERR, "Could not open interrupt channel " \ 160 "to %s. %s (%d)", bt_ntoa(&s->bdaddr, NULL), 161 strerror(errno), errno); 162 session_close(s); 163 connect_in_progress = 0; 164 165 return (-1); 166 } 167 168 s->state = W4INTR; 169 170 FD_SET(s->intr, &srv->wfdset); 171 if (s->intr > srv->maxfd) 172 srv->maxfd = s->intr; 173 174 d->new_device = 0; /* reset new device flag */ 175 write_hids_file(); 176 break; 177 178 case W4INTR: /* Interrupt channel is open */ 179 assert(s->ctrl != -1); 180 assert(s->intr == fd); 181 182 s->state = OPEN; 183 connect_in_progress = 0; 184 break; 185 186 default: 187 assert(0); 188 break; 189 } 190 191 /* Move fd to from the write fd set into read fd set */ 192 FD_CLR(fd, &srv->wfdset); 193 FD_SET(fd, &srv->rfdset); 194 195 return (0); 196} 197 198/* 199 * Create bound non-blocking socket and initiate connect 200 */ 201 202static int 203client_socket(bdaddr_p bdaddr, int psm) 204{ 205 struct sockaddr_l2cap l2addr; 206 int s, m; 207 208 s = socket(PF_BLUETOOTH, SOCK_SEQPACKET, BLUETOOTH_PROTO_L2CAP); 209 if (s < 0) 210 return (-1); 211 212 m = fcntl(s, F_GETFL); 213 if (m < 0) { 214 close(s); 215 return (-1); 216 } 217 218 if (fcntl(s, F_SETFL, (m|O_NONBLOCK)) < 0) { 219 close(s); 220 return (-1); 221 } 222 223 l2addr.l2cap_len = sizeof(l2addr); 224 l2addr.l2cap_family = AF_BLUETOOTH; 225 memcpy(&l2addr.l2cap_bdaddr, NG_HCI_BDADDR_ANY, sizeof(l2addr.l2cap_bdaddr)); 226 l2addr.l2cap_psm = 0; 227 228 if (bind(s, (struct sockaddr *) &l2addr, sizeof(l2addr)) < 0) { 229 close(s); 230 return (-1); 231 } 232 233 memcpy(&l2addr.l2cap_bdaddr, bdaddr, sizeof(l2addr.l2cap_bdaddr));
|