NOTES (62058) | NOTES (62114) |
---|---|
1# | 1# |
2# DOCS -- Lines that can be cut/pasted into kernel and hints configs. | 2# NOTES -- Lines that can be cut/pasted into kernel and hints configs. |
3# 4# Lines that begin with 'device', 'options', 'machine', 'ident', 'maxusers', 5# 'makeoptions', 'hints' etc go into the kernel configuration that you 6# run config(8) with. 7# 8# Lines that begin with 'hints.' are NOT for config(8), they go into your 9# hints file. See /boot/device.hints and/or the 'hints' config(8) directive. 10# | 3# 4# Lines that begin with 'device', 'options', 'machine', 'ident', 'maxusers', 5# 'makeoptions', 'hints' etc go into the kernel configuration that you 6# run config(8) with. 7# 8# Lines that begin with 'hints.' are NOT for config(8), they go into your 9# hints file. See /boot/device.hints and/or the 'hints' config(8) directive. 10# |
11# $FreeBSD: head/sys/i386/conf/NOTES 62058 2000-06-25 09:18:13Z markm $ | 11# $FreeBSD: head/sys/i386/conf/NOTES 62114 2000-06-26 10:04:00Z peter $ |
12# 13 14# 15# This directive is mandatory; it defines the architecture to be 16# configured for; in this case, the 386 family based IBM-PC and 17# compatibles. 18# 19machine i386 --- 921 unchanged lines hidden (view full) --- 941# be 131072 (128 * 1024). 942# 943# BROKEN_KEYBOARD_RESET disables the use of the keyboard controller to 944# reset the CPU for reboot. This is needed on some systems with broken 945# keyboard controllers. 946 947options COMPAT_OLDISA #Use ISA shims and glue for old drivers 948options AUTO_EOI_1 | 12# 13 14# 15# This directive is mandatory; it defines the architecture to be 16# configured for; in this case, the 386 family based IBM-PC and 17# compatibles. 18# 19machine i386 --- 921 unchanged lines hidden (view full) --- 941# be 131072 (128 * 1024). 942# 943# BROKEN_KEYBOARD_RESET disables the use of the keyboard controller to 944# reset the CPU for reboot. This is needed on some systems with broken 945# keyboard controllers. 946 947options COMPAT_OLDISA #Use ISA shims and glue for old drivers 948options AUTO_EOI_1 |
949options AUTO_EOI_2 | 949#options AUTO_EOI_2 |
950 951options MAXMEM="(128*1024)" | 950 951options MAXMEM="(128*1024)" |
952options BROKEN_KEYBOARD_RESET | 952#options BROKEN_KEYBOARD_RESET |
953 954# Enable support for the kernel PLL to use an external PPS signal, 955# under supervision of [x]ntpd(8) 956# More info in ntpd documentation: http://www.eecis.udel.edu/~ntp 957 958options PPS_SYNC 959 960# If you see the "calcru: negative time of %ld usec for pid %d (%s)\n" --- 746 unchanged lines hidden (view full) --- 1707# The main PCI bus device is `pci'. It provides auto-detection and 1708# configuration support for all devices on the PCI bus, using either 1709# configuration mode defined in the PCI specification. 1710 1711device pci 1712 1713# PCI options 1714# | 953 954# Enable support for the kernel PLL to use an external PPS signal, 955# under supervision of [x]ntpd(8) 956# More info in ntpd documentation: http://www.eecis.udel.edu/~ntp 957 958options PPS_SYNC 959 960# If you see the "calcru: negative time of %ld usec for pid %d (%s)\n" --- 746 unchanged lines hidden (view full) --- 1707# The main PCI bus device is `pci'. It provides auto-detection and 1708# configuration support for all devices on the PCI bus, using either 1709# configuration mode defined in the PCI specification. 1710 1711device pci 1712 1713# PCI options 1714# |
1715options PCI_QUIET #quiets PCI code on chipset settings | 1715#options PCI_QUIET #quiets PCI code on chipset settings |
1716options COMPAT_OLDPCI #Use PCI shims and glue for old drivers 1717 1718 1719# The `ahc' device provides support for the Adaptec 29/3940(U)(W) 1720# and motherboard based AIC7870/AIC7880 adapters. 1721# 1722# The `amd' device provides support for the AMD 53C974 SCSI host 1723# adapter chip as found on devices such as the Tekram DC-390(T). --- 322 unchanged lines hidden (view full) --- 2046hint.isic.0.port="0xd80" 2047hint.isic.0.maddr="0xd0000" 2048hint.isic.0.irq="5" 2049hint.isic.0.flags="2" 2050# 2051# Teles S0/16.3 2052options TEL_S0_16_3 2053hint.isic.0.at="isa" | 1716options COMPAT_OLDPCI #Use PCI shims and glue for old drivers 1717 1718 1719# The `ahc' device provides support for the Adaptec 29/3940(U)(W) 1720# and motherboard based AIC7870/AIC7880 adapters. 1721# 1722# The `amd' device provides support for the AMD 53C974 SCSI host 1723# adapter chip as found on devices such as the Tekram DC-390(T). --- 322 unchanged lines hidden (view full) --- 2046hint.isic.0.port="0xd80" 2047hint.isic.0.maddr="0xd0000" 2048hint.isic.0.irq="5" 2049hint.isic.0.flags="2" 2050# 2051# Teles S0/16.3 2052options TEL_S0_16_3 2053hint.isic.0.at="isa" |
2054hint.isic.0.maddr="0xd80" | 2054hint.isic.0.port="0xd80" |
2055hint.isic.0.irq="5" 2056hint.isic.0.flags="3" 2057# 2058# AVM A1 or AVM Fritz!Card 2059options AVM_A1 2060hint.isic.0.at="isa" | 2055hint.isic.0.irq="5" 2056hint.isic.0.flags="3" 2057# 2058# AVM A1 or AVM Fritz!Card 2059options AVM_A1 2060hint.isic.0.at="isa" |
2061hint.isic.0.maddr="0x340" | 2061hint.isic.0.port="0x340" |
2062hint.isic.0.irq="5" 2063hint.isic.0.flags="4" 2064# 2065# USRobotics Sportster ISDN TA intern (not supported yet!) 2066#options USR_STI 2067#hint.isic.0.at="isa" | 2062hint.isic.0.irq="5" 2063hint.isic.0.flags="4" 2064# 2065# USRobotics Sportster ISDN TA intern (not supported yet!) 2066#options USR_STI 2067#hint.isic.0.at="isa" |
2068#hint.isic.0.maddr="0x268" | 2068#hint.isic.0.port="0x268" |
2069#hint.isic.0.irq="5" 2070#hint.isic.0.flags="7" 2071# 2072# ITK ix1 Micro ( < V.3, non-PnP version ) (not supported yet!) 2073#options ITKIX1 2074#hint.isic.0.at="isa" | 2069#hint.isic.0.irq="5" 2070#hint.isic.0.flags="7" 2071# 2072# ITK ix1 Micro ( < V.3, non-PnP version ) (not supported yet!) 2073#options ITKIX1 2074#hint.isic.0.at="isa" |
2075#hint.isic.0.maddr="0x398" | 2075#hint.isic.0.port="0x398" |
2076#hint.isic.0.irq="10" 2077#hint.isic.0.flags="18" 2078# 2079# ELSA PCC-16 2080options ELSA_PCC16 2081hint.isic.0.at="isa" | 2076#hint.isic.0.irq="10" 2077#hint.isic.0.flags="18" 2078# 2079# ELSA PCC-16 2080options ELSA_PCC16 2081hint.isic.0.at="isa" |
2082hint.isic.0.maddr="0x360" | 2082hint.isic.0.port="0x360" |
2083hint.isic.0.irq="10" 2084hint.isic.0.flags="20" 2085# 2086# ISA bus PnP Cards: 2087# ------------------ 2088# 2089# Teles S0/16.3 PnP 2090options TEL_S0_16_3_P --- 164 unchanged lines hidden (view full) --- 2255# 2256# Disable swapping. This option removes all code which actually performs 2257# swapping, so it's not possible to turn it back on at run-time. 2258# 2259# This is sometimes usable for systems which don't have any swap space 2260# (see also sysctls "vm.defer_swapspace_pageouts" and 2261# "vm.disable_swapspace_pageouts") 2262# | 2083hint.isic.0.irq="10" 2084hint.isic.0.flags="20" 2085# 2086# ISA bus PnP Cards: 2087# ------------------ 2088# 2089# Teles S0/16.3 PnP 2090options TEL_S0_16_3_P --- 164 unchanged lines hidden (view full) --- 2255# 2256# Disable swapping. This option removes all code which actually performs 2257# swapping, so it's not possible to turn it back on at run-time. 2258# 2259# This is sometimes usable for systems which don't have any swap space 2260# (see also sysctls "vm.defer_swapspace_pageouts" and 2261# "vm.disable_swapspace_pageouts") 2262# |
2263options NO_SWAPPING | 2263#options NO_SWAPPING |
2264 2265# Set the number of sf_bufs to allocate. sf_bufs are virtual buffers 2266# for sendfile(2) that are used to map file VM pages, and normally 2267# default to a quantity that is roughly 16*MAXUSERS+512. You would 2268# typically want about 4 of these for each simultaneous file send. 2269# 2270options NSFBUFS=1024 2271 --- 203 unchanged lines hidden --- | 2264 2265# Set the number of sf_bufs to allocate. sf_bufs are virtual buffers 2266# for sendfile(2) that are used to map file VM pages, and normally 2267# default to a quantity that is roughly 16*MAXUSERS+512. You would 2268# typically want about 4 of these for each simultaneous file send. 2269# 2270options NSFBUFS=1024 2271 --- 203 unchanged lines hidden --- |