NOTES (50073) | NOTES (50120) |
---|---|
1# 2# LINT -- config file for checking all the sources, tries to pull in 3# as much of the source tree as it can. 4# | 1# 2# LINT -- config file for checking all the sources, tries to pull in 3# as much of the source tree as it can. 4# |
5# $Id: LINT,v 1.627 1999/08/15 09:54:56 phk Exp $ | 5# $Id: LINT,v 1.628 1999/08/20 03:48:02 ken Exp $ |
6# 7# NB: You probably don't want to try running a kernel built from this 8# file. Instead, you should start from GENERIC, and add options from 9# this file as required. 10# 11 12# 13# This directive is mandatory; it defines the architecture to be --- 1499 unchanged lines hidden (view full) --- 1513# above clash with the configuration address space of the PCI subsystem, 1514# and the EISA probe is not very smart about this. This is sufficient 1515# for most machines, but in particular the HP NetServer LC series comes 1516# with an onboard AIC7770 dual-channel SCSI controller on EISA slot #11, 1517# thus you need to bump this figure to 12 for them. 1518options EISA_SLOTS=12 1519 1520# | 6# 7# NB: You probably don't want to try running a kernel built from this 8# file. Instead, you should start from GENERIC, and add options from 9# this file as required. 10# 11 12# 13# This directive is mandatory; it defines the architecture to be --- 1499 unchanged lines hidden (view full) --- 1513# above clash with the configuration address space of the PCI subsystem, 1514# and the EISA probe is not very smart about this. This is sufficient 1515# for most machines, but in particular the HP NetServer LC series comes 1516# with an onboard AIC7770 dual-channel SCSI controller on EISA slot #11, 1517# thus you need to bump this figure to 12 for them. 1518options EISA_SLOTS=12 1519 1520# |
1521# MII bus support is required for some PCI 10/100 ethernet NICs, 1522# namely those which use MII-compliant transceivers or implement 1523# tranceiver control interfaces that operate like an MII. Adding 1524# "controller miibus0" to the kernel config pulls in support for 1525# the generic miibus API and all of the PHY drivers, including a 1526# generic one for PHYs that aren't specifically handled by an 1527# individual driver. 1528controller miibus0 1529 1530# |
|
1521# PCI devices & PCI options: 1522# 1523# The main PCI bus device is `pci'. It provides auto-detection and 1524# configuration support for all devices on the PCI bus, using either 1525# configuration mode defined in the PCI specification. 1526# 1527# The `ahc' device provides support for the Adaptec 29/3940(U)(W) 1528# and motherboard based AIC7870/AIC7880 adapters. --- 685 unchanged lines hidden --- | 1531# PCI devices & PCI options: 1532# 1533# The main PCI bus device is `pci'. It provides auto-detection and 1534# configuration support for all devices on the PCI bus, using either 1535# configuration mode defined in the PCI specification. 1536# 1537# The `ahc' device provides support for the Adaptec 29/3940(U)(W) 1538# and motherboard based AIC7870/AIC7880 adapters. --- 685 unchanged lines hidden --- |