1/*-
2 * Copyright (c) 1997, 1998, 1999 Nicolas Souchu
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 *
14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
24 * SUCH DAMAGE.
25 *
26 * $FreeBSD: head/sys/dev/ppbus/ppbconf.h 118607 2003-08-07 15:04:27Z jhb $
27 *
28 */
29#ifndef __PPBCONF_H
30#define __PPBCONF_H
31
32#include <sys/queue.h>
33
34/*
35 * Parallel Port Bus sleep/wakeup queue.
36 */
37#define PPBPRI (PZERO+8)
38
39/*
40 * Parallel Port Chipset mode masks.
41 * NIBBLE mode is supposed to be available under each other modes.
42 */
43#define PPB_COMPATIBLE 0x0 /* Centronics compatible mode */
44
45#define PPB_NIBBLE 0x1 /* reverse 4 bit mode */
46#define PPB_PS2 0x2 /* PS/2 byte mode */
47#define PPB_EPP 0x4 /* EPP mode, 32 bit */
48#define PPB_ECP 0x8 /* ECP mode */
49
50/* mode aliases */
51#define PPB_SPP PPB_NIBBLE|PPB_PS2
52#define PPB_BYTE PPB_PS2
53
54#define PPB_MASK 0x0f
55#define PPB_OPTIONS_MASK 0xf0
56
57#define PPB_IS_EPP(mode) (mode & PPB_EPP)
58#define PPB_IN_EPP_MODE(bus) (PPB_IS_EPP (ppb_get_mode (bus)))
59#define PPB_IN_NIBBLE_MODE(bus) (ppb_get_mode (bus) & PPB_NIBBLE)
60#define PPB_IN_PS2_MODE(bus) (ppb_get_mode (bus) & PPB_PS2)
61
62#define n(flags) (~(flags) & (flags))
63
64/*
65 * Parallel Port Chipset control bits.
66 */
67#define STROBE 0x01
68#define AUTOFEED 0x02
69#define nINIT 0x04
70#define SELECTIN 0x08
71#define IRQENABLE 0x10
72#define PCD 0x20
73
74#define nSTROBE n(STROBE)
75#define nAUTOFEED n(AUTOFEED)
76#define INIT n(nINIT)
77#define nSELECTIN n(SELECTIN)
78#define nPCD n(PCD)
79
80/*
81 * Parallel Port Chipset status bits.
82 */
83#define TIMEOUT 0x01
84#define nFAULT 0x08
85#define SELECT 0x10
86#define PERROR 0x20
87#define nACK 0x40
88#define nBUSY 0x80
89
90/*
91 * Structure to store status information.
92 */
93struct ppb_status {
94 unsigned char status;
95
96 unsigned int timeout:1;
97 unsigned int error:1;
98 unsigned int select:1;
99 unsigned int paper_end:1;
100 unsigned int ack:1;
101 unsigned int busy:1;
102};
103
104/* Parallel port bus I/O opcodes */
105#define PPB_OUTSB_EPP 1
106#define PPB_OUTSW_EPP 2
107#define PPB_OUTSL_EPP 3
108#define PPB_INSB_EPP 4
109#define PPB_INSW_EPP 5
110#define PPB_INSL_EPP 6
111#define PPB_RDTR 7
112#define PPB_RSTR 8
113#define PPB_RCTR 9
114#define PPB_REPP_A 10
115#define PPB_REPP_D 11
116#define PPB_RECR 12
117#define PPB_RFIFO 13
118#define PPB_WDTR 14
119#define PPB_WSTR 15
120#define PPB_WCTR 16
121#define PPB_WEPP_A 17
122#define PPB_WEPP_D 18
123#define PPB_WECR 19
124#define PPB_WFIFO 20
125
126/*
127 * How tsleep() is called in ppb_request_bus().
128 */
129#define PPB_DONTWAIT 0
130#define PPB_NOINTR 0
131#define PPB_WAIT 0x1
132#define PPB_INTR 0x2
133#define PPB_POLL 0x4
134#define PPB_FOREVER -1
135
136/*
137 * Microsequence stuff.
138 */
139#define PPB_MS_MAXLEN 64 /* XXX according to MS_INS_MASK */
140#define PPB_MS_MAXARGS 3 /* according to MS_ARG_MASK */
141
142/* maximum number of mode dependent
143 * submicrosequences for in/out operations
144 */
145#define PPB_MAX_XFER 6
146
147union ppb_insarg {
148 int i;
149 void *p;
150 char *c;
151 int (* f)(void *, char *);
152};
153
154struct ppb_microseq {
155 int opcode; /* microins. opcode */
156 union ppb_insarg arg[PPB_MS_MAXARGS]; /* arguments */
157};
158
159/* microseqences used for GET/PUT operations */
160struct ppb_xfer {
161 struct ppb_microseq *loop; /* the loop microsequence */
162};
163
164/*
165 * Parallel Port Bus Device structure.
166 */
167struct ppb_data; /* see below */
168
169struct ppb_context {
170 int valid; /* 1 if the struct is valid */
171 int mode; /* XXX chipset operating mode */
172
173 struct microseq *curpc; /* pc in curmsq */
174 struct microseq *curmsq; /* currently executed microseqence */
175};
176
177/*
178 * List of IVARS available to ppb device drivers
179 */
180#define PPBUS_IVAR_MODE 0
181#define PPBUS_IVAR_AVM 1
182#define PPBUS_IVAR_IRQ 2
183
184/* other fields are reserved to the ppbus internals */
185
186struct ppb_device {
187
188 const char *name; /* name of the device */
189
190 u_short mode; /* current mode of the device */
191 u_short avm; /* available IEEE1284 modes of
192 * the device */
193 u_int flags; /* flags */
194
195 struct ppb_context ctx; /* context of the device */
196
197 /* mode dependent get msq. If NULL,
198 * IEEE1284 code is used */
199 struct ppb_xfer
200 get_xfer[PPB_MAX_XFER];
201
202 /* mode dependent put msq. If NULL,
203 * IEEE1284 code is used */
204 struct ppb_xfer
205 put_xfer[PPB_MAX_XFER];
206
207 struct resource *intr_resource;
208 void *intr_cookie;
209
210 void *drv1, *drv2; /* drivers private data */
211};
212
213/* EPP standards */
214#define EPP_1_9 0x0 /* default */
215#define EPP_1_7 0x1
216
217/* Parallel Port Chipset IVARS */ /* elsewhere XXX */
218#define PPC_IVAR_EPP_PROTO 0
219#define PPC_IVAR_IRQ 1
220
221/*
222 * Maximum size of the PnP info string
223 */
224#define PPB_PnP_STRING_SIZE 256 /* XXX */
225
226/*
227 * Parallel Port Bus structure.
228 */
229struct ppb_data {
230
231#define PPB_PnP_PRINTER 0
232#define PPB_PnP_MODEM 1
233#define PPB_PnP_NET 2
234#define PPB_PnP_HDC 3
235#define PPB_PnP_PCMCIA 4
236#define PPB_PnP_MEDIA 5
237#define PPB_PnP_FDC 6
238#define PPB_PnP_PORTS 7
239#define PPB_PnP_SCANNER 8
240#define PPB_PnP_DIGICAM 9
241#define PPB_PnP_UNKNOWN 10
242 int class_id; /* not a PnP device if class_id < 0 */
243
244 int state; /* current IEEE1284 state */
245 int error; /* last IEEE1284 error */
246
247 int mode; /* IEEE 1284-1994 mode
248 * NIBBLE, PS2, EPP or ECP */
249
250 void *ppb_owner; /* device which owns the bus */
251};
252
253#ifdef _KERNEL
254extern int ppb_attach_device(device_t);
255extern int ppb_request_bus(device_t, device_t, int);
256extern int ppb_release_bus(device_t, device_t);
257
258/* bus related functions */
259extern int ppb_get_status(device_t, struct ppb_status *);
260extern int ppb_poll_bus(device_t, int, char, char, int);
261extern int ppb_reset_epp_timeout(device_t);
262extern int ppb_ecp_sync(device_t);
263extern int ppb_get_epp_protocol(device_t);
264extern int ppb_set_mode(device_t, int); /* returns old mode */
265extern int ppb_get_mode(device_t); /* returns current mode */
266extern int ppb_write(device_t, char *, int, int);
267#endif /* _KERNEL */
268
269/*
270 * These are defined as macros for speedup.
271#define ppb_get_base_addr(dev) ((dev)->ppb->ppb_link->base)
272#define ppb_get_epp_protocol(dev) ((dev)->ppb->ppb_link->epp_protocol)
273#define ppb_get_irq(dev) ((dev)->ppb->ppb_link->id_irq)
274 */
275
276#endif
2 * Copyright (c) 1997, 1998, 1999 Nicolas Souchu
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 *
14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
24 * SUCH DAMAGE.
25 *
26 * $FreeBSD: head/sys/dev/ppbus/ppbconf.h 118607 2003-08-07 15:04:27Z jhb $
27 *
28 */
29#ifndef __PPBCONF_H
30#define __PPBCONF_H
31
32#include <sys/queue.h>
33
34/*
35 * Parallel Port Bus sleep/wakeup queue.
36 */
37#define PPBPRI (PZERO+8)
38
39/*
40 * Parallel Port Chipset mode masks.
41 * NIBBLE mode is supposed to be available under each other modes.
42 */
43#define PPB_COMPATIBLE 0x0 /* Centronics compatible mode */
44
45#define PPB_NIBBLE 0x1 /* reverse 4 bit mode */
46#define PPB_PS2 0x2 /* PS/2 byte mode */
47#define PPB_EPP 0x4 /* EPP mode, 32 bit */
48#define PPB_ECP 0x8 /* ECP mode */
49
50/* mode aliases */
51#define PPB_SPP PPB_NIBBLE|PPB_PS2
52#define PPB_BYTE PPB_PS2
53
54#define PPB_MASK 0x0f
55#define PPB_OPTIONS_MASK 0xf0
56
57#define PPB_IS_EPP(mode) (mode & PPB_EPP)
58#define PPB_IN_EPP_MODE(bus) (PPB_IS_EPP (ppb_get_mode (bus)))
59#define PPB_IN_NIBBLE_MODE(bus) (ppb_get_mode (bus) & PPB_NIBBLE)
60#define PPB_IN_PS2_MODE(bus) (ppb_get_mode (bus) & PPB_PS2)
61
62#define n(flags) (~(flags) & (flags))
63
64/*
65 * Parallel Port Chipset control bits.
66 */
67#define STROBE 0x01
68#define AUTOFEED 0x02
69#define nINIT 0x04
70#define SELECTIN 0x08
71#define IRQENABLE 0x10
72#define PCD 0x20
73
74#define nSTROBE n(STROBE)
75#define nAUTOFEED n(AUTOFEED)
76#define INIT n(nINIT)
77#define nSELECTIN n(SELECTIN)
78#define nPCD n(PCD)
79
80/*
81 * Parallel Port Chipset status bits.
82 */
83#define TIMEOUT 0x01
84#define nFAULT 0x08
85#define SELECT 0x10
86#define PERROR 0x20
87#define nACK 0x40
88#define nBUSY 0x80
89
90/*
91 * Structure to store status information.
92 */
93struct ppb_status {
94 unsigned char status;
95
96 unsigned int timeout:1;
97 unsigned int error:1;
98 unsigned int select:1;
99 unsigned int paper_end:1;
100 unsigned int ack:1;
101 unsigned int busy:1;
102};
103
104/* Parallel port bus I/O opcodes */
105#define PPB_OUTSB_EPP 1
106#define PPB_OUTSW_EPP 2
107#define PPB_OUTSL_EPP 3
108#define PPB_INSB_EPP 4
109#define PPB_INSW_EPP 5
110#define PPB_INSL_EPP 6
111#define PPB_RDTR 7
112#define PPB_RSTR 8
113#define PPB_RCTR 9
114#define PPB_REPP_A 10
115#define PPB_REPP_D 11
116#define PPB_RECR 12
117#define PPB_RFIFO 13
118#define PPB_WDTR 14
119#define PPB_WSTR 15
120#define PPB_WCTR 16
121#define PPB_WEPP_A 17
122#define PPB_WEPP_D 18
123#define PPB_WECR 19
124#define PPB_WFIFO 20
125
126/*
127 * How tsleep() is called in ppb_request_bus().
128 */
129#define PPB_DONTWAIT 0
130#define PPB_NOINTR 0
131#define PPB_WAIT 0x1
132#define PPB_INTR 0x2
133#define PPB_POLL 0x4
134#define PPB_FOREVER -1
135
136/*
137 * Microsequence stuff.
138 */
139#define PPB_MS_MAXLEN 64 /* XXX according to MS_INS_MASK */
140#define PPB_MS_MAXARGS 3 /* according to MS_ARG_MASK */
141
142/* maximum number of mode dependent
143 * submicrosequences for in/out operations
144 */
145#define PPB_MAX_XFER 6
146
147union ppb_insarg {
148 int i;
149 void *p;
150 char *c;
151 int (* f)(void *, char *);
152};
153
154struct ppb_microseq {
155 int opcode; /* microins. opcode */
156 union ppb_insarg arg[PPB_MS_MAXARGS]; /* arguments */
157};
158
159/* microseqences used for GET/PUT operations */
160struct ppb_xfer {
161 struct ppb_microseq *loop; /* the loop microsequence */
162};
163
164/*
165 * Parallel Port Bus Device structure.
166 */
167struct ppb_data; /* see below */
168
169struct ppb_context {
170 int valid; /* 1 if the struct is valid */
171 int mode; /* XXX chipset operating mode */
172
173 struct microseq *curpc; /* pc in curmsq */
174 struct microseq *curmsq; /* currently executed microseqence */
175};
176
177/*
178 * List of IVARS available to ppb device drivers
179 */
180#define PPBUS_IVAR_MODE 0
181#define PPBUS_IVAR_AVM 1
182#define PPBUS_IVAR_IRQ 2
183
184/* other fields are reserved to the ppbus internals */
185
186struct ppb_device {
187
188 const char *name; /* name of the device */
189
190 u_short mode; /* current mode of the device */
191 u_short avm; /* available IEEE1284 modes of
192 * the device */
193 u_int flags; /* flags */
194
195 struct ppb_context ctx; /* context of the device */
196
197 /* mode dependent get msq. If NULL,
198 * IEEE1284 code is used */
199 struct ppb_xfer
200 get_xfer[PPB_MAX_XFER];
201
202 /* mode dependent put msq. If NULL,
203 * IEEE1284 code is used */
204 struct ppb_xfer
205 put_xfer[PPB_MAX_XFER];
206
207 struct resource *intr_resource;
208 void *intr_cookie;
209
210 void *drv1, *drv2; /* drivers private data */
211};
212
213/* EPP standards */
214#define EPP_1_9 0x0 /* default */
215#define EPP_1_7 0x1
216
217/* Parallel Port Chipset IVARS */ /* elsewhere XXX */
218#define PPC_IVAR_EPP_PROTO 0
219#define PPC_IVAR_IRQ 1
220
221/*
222 * Maximum size of the PnP info string
223 */
224#define PPB_PnP_STRING_SIZE 256 /* XXX */
225
226/*
227 * Parallel Port Bus structure.
228 */
229struct ppb_data {
230
231#define PPB_PnP_PRINTER 0
232#define PPB_PnP_MODEM 1
233#define PPB_PnP_NET 2
234#define PPB_PnP_HDC 3
235#define PPB_PnP_PCMCIA 4
236#define PPB_PnP_MEDIA 5
237#define PPB_PnP_FDC 6
238#define PPB_PnP_PORTS 7
239#define PPB_PnP_SCANNER 8
240#define PPB_PnP_DIGICAM 9
241#define PPB_PnP_UNKNOWN 10
242 int class_id; /* not a PnP device if class_id < 0 */
243
244 int state; /* current IEEE1284 state */
245 int error; /* last IEEE1284 error */
246
247 int mode; /* IEEE 1284-1994 mode
248 * NIBBLE, PS2, EPP or ECP */
249
250 void *ppb_owner; /* device which owns the bus */
251};
252
253#ifdef _KERNEL
254extern int ppb_attach_device(device_t);
255extern int ppb_request_bus(device_t, device_t, int);
256extern int ppb_release_bus(device_t, device_t);
257
258/* bus related functions */
259extern int ppb_get_status(device_t, struct ppb_status *);
260extern int ppb_poll_bus(device_t, int, char, char, int);
261extern int ppb_reset_epp_timeout(device_t);
262extern int ppb_ecp_sync(device_t);
263extern int ppb_get_epp_protocol(device_t);
264extern int ppb_set_mode(device_t, int); /* returns old mode */
265extern int ppb_get_mode(device_t); /* returns current mode */
266extern int ppb_write(device_t, char *, int, int);
267#endif /* _KERNEL */
268
269/*
270 * These are defined as macros for speedup.
271#define ppb_get_base_addr(dev) ((dev)->ppb->ppb_link->base)
272#define ppb_get_epp_protocol(dev) ((dev)->ppb->ppb_link->epp_protocol)
273#define ppb_get_irq(dev) ((dev)->ppb->ppb_link->id_irq)
274 */
275
276#endif