2#
3# On the handling of kernel options
4#
5# All kernel options should be listed in NOTES, with suitable
6# descriptions. Negative options (options that make some code not
7# compile) should be commented out; LINT (generated from NOTES) should
8# compile as much code as possible. Try to structure option-using
9# code so that a single option only switch code on, or only switch
10# code off, to make it possible to have a full compile-test. If
11# necessary, you can check for COMPILING_LINT to get maximum code
12# coverage.
13#
14# All new options shall also be listed in either "conf/options" or
15# "conf/options.<machine>". Options that affect a single source-file
16# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options
17# that affect multiple files should either go in "opt_global.h" if
18# this is a kernel-wide option (used just about everywhere), or in
19# "opt_<option-name-in-lower-case>.h" if it affects only some files.
20# Note that the effect of listing only an option without a
21# header-file-name in conf/options (and cousins) is that the last
22# convention is followed.
23#
24# This handling scheme is not yet fully implemented.
25#
26#
27# Format of this file:
28# Option name filename
29#
30# If filename is missing, the default is
31# opt_<name-of-option-in-lower-case>.h
32
33AAC_DEBUG opt_aac.h
34AHC_ALLOW_MEMIO opt_aic7xxx.h
35AHC_TMODE_ENABLE opt_aic7xxx.h
36AHC_DUMP_EEPROM opt_aic7xxx.h
37AHC_DEBUG opt_aic7xxx.h
38AHC_DEBUG_OPTS opt_aic7xxx.h
39AHC_REG_PRETTY_PRINT opt_aic7xxx.h
40AHD_DEBUG opt_aic79xx.h
41AHD_DEBUG_OPTS opt_aic79xx.h
42AHD_TMODE_ENABLE opt_aic79xx.h
43AHD_REG_PRETTY_PRINT opt_aic79xx.h
44ADW_ALLOW_MEMIO opt_adw.h
45
46TWA_DEBUG opt_twa.h
47TWA_FLASH_FIRMWARE opt_twa.h
48
49# Debugging options.
50DDB
51DDB_BUFR_SIZE opt_ddb.h
52DDB_CAPTURE_DEFAULTBUFSIZE opt_ddb.h
53DDB_CAPTURE_MAXBUFSIZE opt_ddb.h
54DDB_CTF opt_ddb.h
55DDB_NUMSYM opt_ddb.h
56GDB
57KDB opt_global.h
58KDB_TRACE opt_kdb.h
59KDB_UNATTENDED opt_kdb.h
60SYSCTL_DEBUG opt_sysctl.h
61
62# Miscellaneous options.
63ADAPTIVE_LOCKMGRS
64ALQ
65AUDIT opt_global.h
66CAPABILITIES opt_capabilities.h
67CODA_COMPAT_5 opt_coda.h
68COMPAT_43 opt_compat.h
69COMPAT_43TTY opt_compat.h
70COMPAT_FREEBSD4 opt_compat.h
71COMPAT_FREEBSD5 opt_compat.h
72COMPAT_FREEBSD6 opt_compat.h
73COMPAT_FREEBSD7 opt_compat.h
74COMPILING_LINT opt_global.h
75COMPRESS_USER_CORES opt_core.h
76CY_PCI_FASTINTR
77DEADLKRES opt_watchdog.h
78DIRECTIO
79FULL_PREEMPTION opt_sched.h
80IPI_PREEMPTION opt_sched.h
81GEOM_AES opt_geom.h
82GEOM_BDE opt_geom.h
83GEOM_BSD opt_geom.h
84GEOM_CACHE opt_geom.h
85GEOM_CONCAT opt_geom.h
86GEOM_ELI opt_geom.h
87GEOM_FOX opt_geom.h
88GEOM_GATE opt_geom.h
89GEOM_JOURNAL opt_geom.h
90GEOM_LABEL opt_geom.h
91GEOM_LINUX_LVM opt_geom.h
92GEOM_MBR opt_geom.h
93GEOM_MIRROR opt_geom.h
94GEOM_MULTIPATH opt_geom.h
95GEOM_NOP opt_geom.h
96GEOM_PART_APM opt_geom.h
97GEOM_PART_BSD opt_geom.h
98GEOM_PART_EBR opt_geom.h
99GEOM_PART_EBR_COMPAT opt_geom.h
100GEOM_PART_GPT opt_geom.h
101GEOM_PART_MBR opt_geom.h
102GEOM_PART_PC98 opt_geom.h
103GEOM_PART_VTOC8 opt_geom.h
104GEOM_PC98 opt_geom.h
105GEOM_RAID opt_geom.h
106GEOM_RAID3 opt_geom.h
107GEOM_SHSEC opt_geom.h
108GEOM_STRIPE opt_geom.h
109GEOM_SUNLABEL opt_geom.h
110GEOM_UZIP opt_geom.h
111GEOM_VIRSTOR opt_geom.h
112GEOM_VOL opt_geom.h
113GEOM_ZERO opt_geom.h
114KDTRACE_HOOKS opt_kdtrace.h
115KSTACK_MAX_PAGES
116KSTACK_PAGES
117KTRACE
118KTRACE_REQUEST_POOL opt_ktrace.h
119LIBICONV
120MAC opt_global.h
121MAC_BIBA opt_dontuse.h
122MAC_BSDEXTENDED opt_dontuse.h
123MAC_IFOFF opt_dontuse.h
124MAC_LOMAC opt_dontuse.h
125MAC_MLS opt_dontuse.h
126MAC_NONE opt_dontuse.h
127MAC_PARTITION opt_dontuse.h
128MAC_PORTACL opt_dontuse.h
129MAC_SEEOTHERUIDS opt_dontuse.h
130MAC_STATIC opt_mac.h
131MAC_STUB opt_dontuse.h
132MAC_TEST opt_dontuse.h
133MD_ROOT opt_md.h
134MD_ROOT_SIZE opt_md.h
135MFI_DEBUG opt_mfi.h
136MFI_DECODE_LOG opt_mfi.h
137MPROF_BUFFERS opt_mprof.h
138MPROF_HASH_SIZE opt_mprof.h
139NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h
140NO_ADAPTIVE_RWLOCKS
141NO_ADAPTIVE_SX
142NO_SYSCTL_DESCR opt_global.h
143NSWBUF_MIN opt_swap.h
144MBUF_PACKET_ZONE_DISABLE opt_global.h
145PANIC_REBOOT_WAIT_TIME opt_panic.h
146PPC_DEBUG opt_ppc.h
147PPC_PROBE_CHIPSET opt_ppc.h
148PPS_SYNC opt_ntp.h
149PREEMPTION opt_sched.h
150QUOTA
151SCHED_4BSD opt_sched.h
152SCHED_STATS opt_sched.h
153SCHED_ULE opt_sched.h
154SHOW_BUSYBUFS
155SLEEPQUEUE_PROFILING
156SLHCI_DEBUG opt_slhci.h
157SPX_HACK
158STACK opt_stack.h
159SUIDDIR
160MSGMNB opt_sysvipc.h
161MSGMNI opt_sysvipc.h
162MSGSEG opt_sysvipc.h
163MSGSSZ opt_sysvipc.h
164MSGTQL opt_sysvipc.h
165SEMMAP opt_sysvipc.h
166SEMMNI opt_sysvipc.h
167SEMMNS opt_sysvipc.h
168SEMMNU opt_sysvipc.h
169SEMMSL opt_sysvipc.h
170SEMOPM opt_sysvipc.h
171SEMUME opt_sysvipc.h
172SHMALL opt_sysvipc.h
173SHMMAX opt_sysvipc.h
174SHMMAXPGS opt_sysvipc.h
175SHMMIN opt_sysvipc.h
176SHMMNI opt_sysvipc.h
177SHMSEG opt_sysvipc.h
178SYSVMSG opt_sysvipc.h
179SYSVSEM opt_sysvipc.h
180SYSVSHM opt_sysvipc.h
181SW_WATCHDOG opt_watchdog.h
182TURNSTILE_PROFILING
183VFS_AIO
184VERBOSE_SYSINIT opt_global.h
185WLCACHE opt_wavelan.h
186WLDEBUG opt_wavelan.h
187
188# POSIX kernel options
189P1003_1B_MQUEUE opt_posix.h
190P1003_1B_SEMAPHORES opt_posix.h
191_KPOSIX_PRIORITY_SCHEDULING opt_posix.h
192
193# Do we want the config file compiled into the kernel?
194INCLUDE_CONFIG_FILE opt_config.h
195
196# Options for static filesystems. These should only be used at config
197# time, since the corresponding lkms cannot work if there are any static
198# dependencies. Unusability is enforced by hiding the defines for the
199# options in a never-included header.
200CD9660 opt_dontuse.h
201CODA opt_dontuse.h
202EXT2FS opt_dontuse.h
203FDESCFS opt_dontuse.h
204FFS opt_dontuse.h
205HPFS opt_dontuse.h
206MSDOSFS opt_dontuse.h
207NTFS opt_dontuse.h
208NULLFS opt_dontuse.h
209NWFS opt_dontuse.h
210PORTALFS opt_dontuse.h
211PROCFS opt_dontuse.h
212PSEUDOFS opt_dontuse.h
213REISERFS opt_dontuse.h
214SMBFS opt_dontuse.h
215TMPFS opt_dontuse.h
216UDF opt_dontuse.h
217UNIONFS opt_dontuse.h
218
219# Pseudofs debugging
220PSEUDOFS_TRACE opt_pseudofs.h
221
222# In-kernel GSS-API
223KGSSAPI opt_kgssapi.h
224KGSSAPI_DEBUG opt_kgssapi.h
225
226# These static filesystems have one slightly bogus static dependency in
227# sys/i386/i386/autoconf.c. If any of these filesystems are
228# statically compiled into the kernel, code for mounting them as root
229# filesystems will be enabled - but look below.
230NFSCLIENT opt_nfs.h
231NFSSERVER opt_nfs.h
232
233# Use these options to compile the experimental nfs client and/or
234# server that supports NFSv4 into a kernel.
235# NFSCL - client
236# NFSD - server
237NFSCL opt_nfs.h
238NFSD opt_nfs.h
239
240# filesystems and libiconv bridge
241CD9660_ICONV opt_dontuse.h
242MSDOSFS_ICONV opt_dontuse.h
243NTFS_ICONV opt_dontuse.h
244UDF_ICONV opt_dontuse.h
245
246# If you are following the conditions in the copyright,
247# you can enable soft-updates which will speed up a lot of thigs
248# and make the system safer from crashes at the same time.
249# otherwise a STUB module will be compiled in.
250SOFTUPDATES opt_ffs.h
251
252# On small, embedded systems, it can be useful to turn off support for
253# snapshots. It saves about 30-40k for a feature that would be lightly
254# used, if it is used at all.
255NO_FFS_SNAPSHOT opt_ffs.h
256
257# Enabling this option turns on support for Access Control Lists in UFS,
258# which can be used to support high security configurations. Depends on
259# UFS_EXTATTR.
260UFS_ACL opt_ufs.h
261
262# Enabling this option turns on support for extended attributes in UFS-based
263# filesystems, which can be used to support high security configurations
264# as well as new filesystem features.
265UFS_EXTATTR opt_ufs.h
266UFS_EXTATTR_AUTOSTART opt_ufs.h
267
268# Enable fast hash lookups for large directories on UFS-based filesystems.
269UFS_DIRHASH opt_ufs.h
270
271# Enable gjournal-based UFS journal.
272UFS_GJOURNAL opt_ufs.h
273
274# The below sentence is not in English, and neither is this one.
275# We plan to remove the static dependences above, with a
276# <filesystem>_ROOT option to control if it usable as root. This list
277# allows these options to be present in config files already (though
278# they won't make any difference yet).
279NFS_ROOT opt_nfsroot.h
280
281# SMB/CIFS requester
282NETSMB opt_netsmb.h
283
284# Options used only in subr_param.c.
285HZ opt_param.h
286MAXFILES opt_param.h
287NBUF opt_param.h
288NSFBUFS opt_param.h
289VM_BCACHE_SIZE_MAX opt_param.h
290VM_SWZONE_SIZE_MAX opt_param.h
291MAXUSERS
292DFLDSIZ opt_param.h
293MAXDSIZ opt_param.h
294MAXSSIZ opt_param.h
295
296# Generic SCSI options.
297CAM_MAX_HIGHPOWER opt_cam.h
298CAMDEBUG opt_cam.h
299CAM_DEBUG_DELAY opt_cam.h
300CAM_DEBUG_BUS opt_cam.h
301CAM_DEBUG_TARGET opt_cam.h
302CAM_DEBUG_LUN opt_cam.h
303CAM_DEBUG_FLAGS opt_cam.h
304SCSI_DELAY opt_scsi.h
305SCSI_NO_SENSE_STRINGS opt_scsi.h
306SCSI_NO_OP_STRINGS opt_scsi.h
307
308# Options used only in cam/scsi/scsi_cd.c
309CHANGER_MIN_BUSY_SECONDS opt_cd.h
310CHANGER_MAX_BUSY_SECONDS opt_cd.h
311
312# Options used only in cam/scsi/scsi_sa.c.
313SA_IO_TIMEOUT opt_sa.h
314SA_SPACE_TIMEOUT opt_sa.h
315SA_REWIND_TIMEOUT opt_sa.h
316SA_ERASE_TIMEOUT opt_sa.h
317SA_1FM_AT_EOD opt_sa.h
318
319# Options used only in cam/scsi/scsi_pt.c
320SCSI_PT_DEFAULT_TIMEOUT opt_pt.h
321
322# Options used only in cam/scsi/scsi_ses.c
323SES_ENABLE_PASSTHROUGH opt_ses.h
324
325# Options used in dev/sym/ (Symbios SCSI driver).
326SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits)
327 # Allows the ncr to take precedence
328 # 1 (1<<0) -> 810a, 860
329 # 2 (1<<1) -> 825a, 875, 885, 895
330 # 4 (1<<2) -> 895a, 896, 1510d
331SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885
332 # disabled:0 (default), enabled:1
333SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking
334 # disabled:0, enabled:1 (default)
335SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported
336 # default:8, range:[1..64]
337
338# Options used only in pci/ncr.c
339SCSI_NCR_DEBUG opt_ncr.h
340SCSI_NCR_MAX_SYNC opt_ncr.h
341SCSI_NCR_MAX_WIDE opt_ncr.h
342SCSI_NCR_MYADDR opt_ncr.h
343
344# Options used only in dev/isp/*
345ISP_TARGET_MODE opt_isp.h
346ISP_FW_CRASH_DUMP opt_isp.h
347ISP_DEFAULT_ROLES opt_isp.h
348ISP_INTERNAL_TARGET opt_isp.h
349
350# Options used only in dev/iscsi
351ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h
352
353# Options used in the 'ata' ATA/ATAPI driver
354ATA_STATIC_ID opt_ata.h
355ATA_NOPCI opt_ata.h
356ATA_REQUEST_TIMEOUT opt_ata.h
357ATA_CAM opt_ata.h
358
359# Net stuff.
360ACCEPT_FILTER_DATA
361ACCEPT_FILTER_DNS
362ACCEPT_FILTER_HTTP
363ALTQ opt_global.h
364ALTQ_CBQ opt_altq.h
365ALTQ_CDNR opt_altq.h
366ALTQ_DEBUG opt_altq.h
367ALTQ_HFSC opt_altq.h
368ALTQ_NOPCC opt_altq.h
369ALTQ_PRIQ opt_altq.h
370ALTQ_RED opt_altq.h
371ALTQ_RIO opt_altq.h
372BOOTP opt_bootp.h
373BOOTP_BLOCKSIZE opt_bootp.h
374BOOTP_COMPAT opt_bootp.h
375BOOTP_NFSROOT opt_bootp.h
376BOOTP_NFSV3 opt_bootp.h
377BOOTP_WIRED_TO opt_bootp.h
378DEVICE_POLLING
379DEV_ENC opt_enc.h
380DEV_PF opt_pf.h
381DEV_PFLOG opt_pf.h
382DEV_PFSYNC opt_pf.h
383DEV_VLAN opt_vlan.h
384DUMMYNET opt_ipdn.h
385ETHER_8022 opt_ef.h
386ETHER_8023 opt_ef.h
387ETHER_II opt_ef.h
388ETHER_SNAP opt_ef.h
389INET opt_inet.h
390INET6 opt_inet6.h
391IPDIVERT
392IPFILTER opt_ipfilter.h
393IPFILTER_DEFAULT_BLOCK opt_ipfilter.h
394IPFILTER_LOG opt_ipfilter.h
395IPFILTER_LOOKUP opt_ipfilter.h
396IPFIREWALL opt_ipfw.h
397IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h
398IPFIREWALL_FORWARD opt_ipfw.h
399IPFIREWALL_NAT opt_ipfw.h
400IPFIREWALL_VERBOSE opt_ipfw.h
401IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h
402IPSEC opt_ipsec.h
403IPSEC_DEBUG opt_ipsec.h
404IPSEC_FILTERTUNNEL opt_ipsec.h
405IPSEC_NAT_T opt_ipsec.h
406IPSTEALTH
407IPX
408KRPC
409LIBALIAS
410LIBMBPOOL
411LIBMCHAIN
412MBUF_PROFILING
413MBUF_STRESS_TEST
414MROUTING opt_mrouting.h
415NCP
416NETATALK opt_atalk.h
417NFSLOCKD
418RADIX_MPATH opt_mpath.h
419ROUTETABLES opt_route.h
420SLIP_IFF_OPTS opt_slip.h
421TCPDEBUG
422TCP_OFFLOAD_DISABLE opt_inet.h #Disable code to dispatch tcp offloading
423TCP_SIGNATURE opt_inet.h
424TCP_SORECEIVE_STREAM opt_inet.h
425VLAN_ARRAY opt_vlan.h
426XBONEHACK
427FLOWTABLE opt_route.h
428
429#
430# SCTP
431#
432SCTP opt_sctp.h
433SCTP_DEBUG opt_sctp.h # Enable debug printfs
434SCTP_WITH_NO_CSUM opt_sctp.h # Use this at your peril
435SCTP_LOCK_LOGGING opt_sctp.h # Log to KTR lock activity
436SCTP_MBUF_LOGGING opt_sctp.h # Log to KTR general mbuf aloc/free
437SCTP_MBCNT_LOGGING opt_sctp.h # Log to KTR mbcnt activity
438SCTP_PACKET_LOGGING opt_sctp.h # Log to a packet buffer last N packets
439SCTP_LTRACE_CHUNKS opt_sctp.h # Log to KTR chunks processed
440SCTP_LTRACE_ERRORS opt_sctp.h # Log to KTR error returns.
441SCTP_USE_PERCPU_STAT opt_sctp.h # Use per cpu stats.
442SCTP_MCORE_INPUT opt_sctp.h # Have multiple input threads for input mbufs
443#
444#
445#
446
447# Netgraph(4). Use option NETGRAPH to enable the base netgraph code.
448# Each netgraph node type can be either be compiled into the kernel
449# or loaded dynamically. To get the former, include the corresponding
450# option below. Each type has its own man page, e.g. ng_async(4).
451NETGRAPH
452NETGRAPH_DEBUG opt_netgraph.h
453NETGRAPH_ASYNC opt_netgraph.h
454NETGRAPH_ATMLLC opt_netgraph.h
455NETGRAPH_ATM_ATMPIF opt_netgraph.h
456NETGRAPH_BLUETOOTH opt_netgraph.h
457NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h
458NETGRAPH_BLUETOOTH_H4 opt_netgraph.h
459NETGRAPH_BLUETOOTH_HCI opt_netgraph.h
460NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h
461NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h
462NETGRAPH_BLUETOOTH_UBT opt_netgraph.h
463NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h
464NETGRAPH_BPF opt_netgraph.h
465NETGRAPH_BRIDGE opt_netgraph.h
466NETGRAPH_CAR opt_netgraph.h
467NETGRAPH_CISCO opt_netgraph.h
468NETGRAPH_DEFLATE opt_netgraph.h
469NETGRAPH_DEVICE opt_netgraph.h
470NETGRAPH_ECHO opt_netgraph.h
471NETGRAPH_EIFACE opt_netgraph.h
472NETGRAPH_ETHER opt_netgraph.h
473NETGRAPH_ETHER_ECHO opt_netgraph.h
474NETGRAPH_FEC opt_netgraph.h
475NETGRAPH_FRAME_RELAY opt_netgraph.h
476NETGRAPH_GIF opt_netgraph.h
477NETGRAPH_GIF_DEMUX opt_netgraph.h
478NETGRAPH_HOLE opt_netgraph.h
479NETGRAPH_IFACE opt_netgraph.h
480NETGRAPH_IP_INPUT opt_netgraph.h
481NETGRAPH_IPFW opt_netgraph.h
482NETGRAPH_KSOCKET opt_netgraph.h
483NETGRAPH_L2TP opt_netgraph.h
484NETGRAPH_LMI opt_netgraph.h
485# MPPC compression requires proprietary files (not included)
486NETGRAPH_MPPC_COMPRESSION opt_netgraph.h
487NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h
488NETGRAPH_NAT opt_netgraph.h
489NETGRAPH_NETFLOW opt_netgraph.h
490NETGRAPH_ONE2MANY opt_netgraph.h
491NETGRAPH_PATCH opt_netgraph.h
492NETGRAPH_PIPE opt_netgraph.h
493NETGRAPH_PPP opt_netgraph.h
494NETGRAPH_PPPOE opt_netgraph.h
495NETGRAPH_PPTPGRE opt_netgraph.h
496NETGRAPH_PRED1 opt_netgraph.h
497NETGRAPH_RFC1490 opt_netgraph.h
498NETGRAPH_SOCKET opt_netgraph.h
499NETGRAPH_SPLIT opt_netgraph.h
500NETGRAPH_SPPP opt_netgraph.h
501NETGRAPH_TAG opt_netgraph.h
502NETGRAPH_TCPMSS opt_netgraph.h
503NETGRAPH_TEE opt_netgraph.h
504NETGRAPH_TTY opt_netgraph.h
505NETGRAPH_UI opt_netgraph.h
506NETGRAPH_VJC opt_netgraph.h
507NETGRAPH_VLAN opt_netgraph.h
508
509# NgATM options
510NGATM_ATM opt_netgraph.h
511NGATM_ATMBASE opt_netgraph.h
512NGATM_SSCOP opt_netgraph.h
513NGATM_SSCFU opt_netgraph.h
514NGATM_UNI opt_netgraph.h
515NGATM_CCATM opt_netgraph.h
516
517# DRM options
518DRM_DEBUG opt_drm.h
519
520ZERO_COPY_SOCKETS opt_zero.h
521TI_PRIVATE_JUMBOS opt_ti.h
522TI_JUMBO_HDRSPLIT opt_ti.h
523BCE_JUMBO_HDRSPLIT opt_bce.h
524
525# XXX Conflict: # of devices vs network protocol (Native ATM).
526# This makes "atm.h" unusable.
527NATM
528
529# DPT driver debug flags
530DPT_MEASURE_PERFORMANCE opt_dpt.h
531DPT_HANDLE_TIMEOUTS opt_dpt.h
532DPT_TIMEOUT_FACTOR opt_dpt.h
533DPT_LOST_IRQ opt_dpt.h
534DPT_RESET_HBA opt_dpt.h
535
536# Misc debug flags. Most of these should probably be replaced with
537# 'DEBUG', and then let people recompile just the interesting modules
538# with 'make CC="cc -DDEBUG"'.
539CLUSTERDEBUG opt_debug_cluster.h
540DEBUG_1284 opt_ppb_1284.h
541VP0_DEBUG opt_vpo.h
542LPT_DEBUG opt_lpt.h
543PLIP_DEBUG opt_plip.h
544LOCKF_DEBUG opt_debug_lockf.h
545NETATALKDEBUG opt_atalk.h
546SI_DEBUG opt_debug_si.h
547
548# Fb options
549FB_DEBUG opt_fb.h
550FB_INSTALL_CDEV opt_fb.h
551
552# ppbus related options
553PERIPH_1284 opt_ppb_1284.h
554DONTPROBE_1284 opt_ppb_1284.h
555
556# smbus related options
557ENABLE_ALART opt_intpm.h
558
559# These cause changes all over the kernel
560BLKDEV_IOSIZE opt_global.h
561BURN_BRIDGES opt_global.h
562DEBUG opt_global.h
563DEBUG_LOCKS opt_global.h
564DEBUG_VFS_LOCKS opt_global.h
565DFLTPHYS opt_global.h
566DIAGNOSTIC opt_global.h
567INVARIANT_SUPPORT opt_global.h
568INVARIANTS opt_global.h
569MAXPHYS opt_global.h
570MCLSHIFT opt_global.h
571MUTEX_DEBUG opt_global.h
572MUTEX_NOINLINE opt_global.h
573LOCK_PROFILING opt_global.h
574LOCK_PROFILING_FAST opt_global.h
575MSIZE opt_global.h
576REGRESSION opt_global.h
577RESTARTABLE_PANICS opt_global.h
578RWLOCK_NOINLINE opt_global.h
579SX_NOINLINE opt_global.h
580VFS_BIO_DEBUG opt_global.h
581
582# These are VM related options
583VM_KMEM_SIZE opt_vm.h
584VM_KMEM_SIZE_SCALE opt_vm.h
585VM_KMEM_SIZE_MAX opt_vm.h
586VM_NRESERVLEVEL opt_vm.h
587VM_LEVEL_0_ORDER opt_vm.h
588NO_SWAPPING opt_vm.h
589MALLOC_MAKE_FAILURES opt_vm.h
590MALLOC_PROFILE opt_vm.h
591MALLOC_DEBUG_MAXZONES opt_vm.h
592
593# The MemGuard replacement allocator used for tamper-after-free detection
594DEBUG_MEMGUARD opt_vm.h
595
596# The RedZone malloc(9) protection
597DEBUG_REDZONE opt_vm.h
598
599# Standard SMP options
600SMP opt_global.h
601
602# Size of the kernel message buffer
603MSGBUF_SIZE opt_msgbuf.h
604
605# NFS options
606NFS_MINATTRTIMO opt_nfs.h
607NFS_MAXATTRTIMO opt_nfs.h
608NFS_MINDIRATTRTIMO opt_nfs.h
609NFS_MAXDIRATTRTIMO opt_nfs.h
610NFS_GATHERDELAY opt_nfs.h
611NFS_WDELAYHASHSIZ opt_nfs.h
612NFS_DEBUG opt_nfs.h
613
614# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver
615OVERRIDE_CARD opt_bktr.h
616OVERRIDE_TUNER opt_bktr.h
617OVERRIDE_DBX opt_bktr.h
618OVERRIDE_MSP opt_bktr.h
619BROOKTREE_SYSTEM_DEFAULT opt_bktr.h
620BROOKTREE_ALLOC_PAGES opt_bktr.h
621BKTR_OVERRIDE_CARD opt_bktr.h
622BKTR_OVERRIDE_TUNER opt_bktr.h
623BKTR_OVERRIDE_DBX opt_bktr.h
624BKTR_OVERRIDE_MSP opt_bktr.h
625BKTR_SYSTEM_DEFAULT opt_bktr.h
626BKTR_ALLOC_PAGES opt_bktr.h
627BKTR_USE_PLL opt_bktr.h
628BKTR_GPIO_ACCESS opt_bktr.h
629BKTR_NO_MSP_RESET opt_bktr.h
630BKTR_430_FX_MODE opt_bktr.h
631BKTR_SIS_VIA_MODE opt_bktr.h
632BKTR_USE_FREEBSD_SMBUS opt_bktr.h
633BKTR_NEW_MSP34XX_DRIVER opt_bktr.h
634
635BREAK_TO_DEBUGGER opt_comconsole.h
636ALT_BREAK_TO_DEBUGGER opt_comconsole.h
637
638# Options to support PPS
639UART_PPS_ON_CTS opt_uart.h
640
641# options for bus/device framework
642BUS_DEBUG opt_bus.h
643
644# options for USB support
645USB_DEBUG opt_usb.h
646USB_HOST_ALIGN opt_usb.h
647USB_REQ_DEBUG opt_usb.h
648USB_VERBOSE opt_usb.h
649USB_EHCI_BIG_ENDIAN_DESC opt_usb.h
650U3G_DEBUG opt_u3g.h
651UKBD_DFLT_KEYMAP opt_ukbd.h
652UPLCOM_INTR_INTERVAL opt_uplcom.h
653UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h
654UVSCOM_INTR_INTERVAL opt_uvscom.h
655
656# Embedded system options
657INIT_PATH
658
659ROOTDEVNAME
660
661FDC_DEBUG opt_fdc.h
662PCFCLOCK_VERBOSE opt_pcfclock.h
663PCFCLOCK_MAX_RETRIES opt_pcfclock.h
664
665KTR opt_global.h
666KTR_ALQ opt_ktr.h
667KTR_MASK opt_ktr.h
668KTR_CPUMASK opt_ktr.h
669KTR_COMPILE opt_global.h
670KTR_ENTRIES opt_global.h
671KTR_VERBOSE opt_ktr.h
672WITNESS opt_global.h
673WITNESS_KDB opt_witness.h
674WITNESS_SKIPSPIN opt_witness.h
675
676# options for ACPI support
677ACPI_DEBUG opt_acpi.h
678ACPI_MAX_TASKS opt_acpi.h
679ACPI_MAX_THREADS opt_acpi.h
680
681# ISA support
682DEV_ISA opt_isa.h
683ISAPNP opt_isa.h
684
685# various 'device presence' options.
686DEV_BPF opt_bpf.h
687DEV_MCA opt_mca.h
688DEV_CARP opt_carp.h
689DEV_SPLASH opt_splash.h
690
691# EISA support
692DEV_EISA opt_eisa.h
693EISA_SLOTS opt_eisa.h
694
695# ed driver
696ED_HPP opt_ed.h
697ED_3C503 opt_ed.h
698ED_SIC opt_ed.h
699
700# bce driver
701BCE_DEBUG opt_bce.h
702BCE_NVRAM_WRITE_SUPPORT opt_bce.h
703
704# bxe driver
705BXE_DEBUG opt_bxe.h
706BXE_NVRAM_WRITE_SUPPORT opt_bxe.h
707
708SOCKBUF_DEBUG opt_global.h
709
710
711# options for ubsec driver
712UBSEC_DEBUG opt_ubsec.h
713UBSEC_RNDTEST opt_ubsec.h
714UBSEC_NO_RNG opt_ubsec.h
715
716# options for hifn driver
717HIFN_DEBUG opt_hifn.h
718HIFN_RNDTEST opt_hifn.h
719
720# options for safenet driver
721SAFE_DEBUG opt_safe.h
722SAFE_NO_RNG opt_safe.h
723SAFE_RNDTEST opt_safe.h
724
725# syscons options
726MAXCONS opt_syscons.h
727SC_ALT_MOUSE_IMAGE opt_syscons.h
728SC_CUT_SPACES2TABS opt_syscons.h
729SC_CUT_SEPCHARS opt_syscons.h
730SC_DEBUG_LEVEL opt_syscons.h
731SC_DFLT_FONT opt_syscons.h
732SC_DISABLE_KDBKEY opt_syscons.h
733SC_DISABLE_REBOOT opt_syscons.h
734SC_HISTORY_SIZE opt_syscons.h
735SC_KERNEL_CONS_ATTR opt_syscons.h
736SC_KERNEL_CONS_REV_ATTR opt_syscons.h
737SC_MOUSE_CHAR opt_syscons.h
738SC_NO_CUTPASTE opt_syscons.h
739SC_NO_FONT_LOADING opt_syscons.h
740SC_NO_HISTORY opt_syscons.h
741SC_NO_MODE_CHANGE opt_syscons.h
742SC_NO_SUSPEND_VTYSWITCH opt_syscons.h
743SC_NO_SYSMOUSE opt_syscons.h
744SC_NORM_ATTR opt_syscons.h
745SC_NORM_REV_ATTR opt_syscons.h
746SC_PIXEL_MODE opt_syscons.h
747SC_RENDER_DEBUG opt_syscons.h
748SC_TWOBUTTON_MOUSE opt_syscons.h
749
750# teken terminal emulator options
751TEKEN_CONS25 opt_teken.h
752TEKEN_UTF8 opt_teken.h
753
754# options for printf
755PRINTF_BUFR_SIZE opt_printf.h
756
757# kbd options
758KBD_DISABLE_KEYMAP_LOAD opt_kbd.h
759KBD_INSTALL_CDEV opt_kbd.h
760KBD_MAXRETRY opt_kbd.h
761KBD_MAXWAIT opt_kbd.h
762KBD_RESETDELAY opt_kbd.h
763KBDIO_DEBUG opt_kbd.h
764
765# options for the Atheros driver
766ATH_DEBUG opt_ath.h
767ATH_TXBUF opt_ath.h
768ATH_RXBUF opt_ath.h
769ATH_DIAGAPI opt_ath.h
770ATH_TX99_DIAG opt_ath.h
771ATH_ENABLE_11N opt_ah.h
772
773# options for the Atheros hal
774AH_SUPPORT_AR5416 opt_ah.h
775
776AH_DEBUG opt_ah.h
777AH_ASSERT opt_ah.h
778AH_DEBUG_ALQ opt_ah.h
779AH_REGOPS_FUNC opt_ah.h
780AH_WRITE_REGDOMAIN opt_ah.h
781AH_DEBUG_COUNTRY opt_ah.h
782AH_WRITE_EEPROM opt_ah.h
783AH_PRIVATE_DIAG opt_ah.h
784AH_NEED_DESC_SWAP opt_ah.h
785AH_USE_INIPDGAIN opt_ah.h
786AH_MAXCHAN opt_ah.h
787AH_RXCFG_SDMAMW_4BYTES opt_ah.h
788
789# options for the Broadcom BCM43xx driver (bwi)
790BWI_DEBUG opt_bwi.h
791BWI_DEBUG_VERBOSE opt_bwi.h
792
793# options for the Marvell 8335 wireless driver
794MALO_DEBUG opt_malo.h
795MALO_TXBUF opt_malo.h
796MALO_RXBUF opt_malo.h
797
798# options for the Marvell wireless driver
799MWL_DEBUG opt_mwl.h
800MWL_TXBUF opt_mwl.h
801MWL_RXBUF opt_mwl.h
802MWL_DIAGAPI opt_mwl.h
803MWL_AGGR_SIZE opt_mwl.h
804MWL_TX_NODROP opt_mwl.h
805
806# dcons options
807DCONS_BUF_SIZE opt_dcons.h
808DCONS_POLL_HZ opt_dcons.h
809DCONS_FORCE_CONSOLE opt_dcons.h
810DCONS_FORCE_GDB opt_dcons.h
811
812# HWPMC options
813HWPMC_HOOKS
814
815# XBOX options for FreeBSD/i386, but some files are MI
816XBOX opt_xbox.h
817
818# XFS
819XFS
820
821# Interrupt filtering
822INTR_FILTER
823
824# 802.11 support layer
825IEEE80211_DEBUG opt_wlan.h
826IEEE80211_DEBUG_REFCNT opt_wlan.h
827IEEE80211_AMPDU_AGE opt_wlan.h
828IEEE80211_SUPPORT_MESH opt_wlan.h
829IEEE80211_SUPPORT_SUPERG opt_wlan.h
830IEEE80211_SUPPORT_TDMA opt_wlan.h
831
832# 802.11 TDMA support
833TDMA_SLOTLEN_DEFAULT opt_tdma.h
834TDMA_SLOTCNT_DEFAULT opt_tdma.h
835TDMA_BINTVAL_DEFAULT opt_tdma.h
836TDMA_TXRATE_11B_DEFAULT opt_tdma.h
837TDMA_TXRATE_11G_DEFAULT opt_tdma.h
838TDMA_TXRATE_11A_DEFAULT opt_tdma.h
839TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h
840TDMA_TXRATE_HALF_DEFAULT opt_tdma.h
841TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h
842TDMA_TXRATE_11NA_DEFAULT opt_tdma.h
843TDMA_TXRATE_11NG_DEFAULT opt_tdma.h
844
845# Network stack virtualization options
846VIMAGE opt_global.h
847VNET_DEBUG opt_global.h
848
849# Common Flash Interface (CFI) options
850CFI_SUPPORT_STRATAFLASH opt_cfi.h
851CFI_ARMEDANDDANGEROUS opt_cfi.h
852
853# Sound options
854SND_DEBUG opt_snd.h
855SND_DIAGNOSTIC opt_snd.h
856SND_FEEDER_MULTIFORMAT opt_snd.h
857SND_FEEDER_FULL_MULTIFORMAT opt_snd.h
858SND_FEEDER_RATE_HP opt_snd.h
859SND_PCM_64 opt_snd.h
860SND_OLDSTEREO opt_snd.h
861
862X86BIOS
863
864# Flattened device tree options
865FDT opt_platform.h
866FDT_DTB_STATIC opt_platform.h
867
868# OFED Infiniband stack
869OFED opt_ofed.h
870OFED_DEBUG_INIT opt_ofed.h
871SDP opt_ofed.h
872SDP_DEBUG opt_ofed.h
873IPOIB_DEBUG opt_ofed.h
874IPOIB_CM opt_ofed.h
875
| 2#
3# On the handling of kernel options
4#
5# All kernel options should be listed in NOTES, with suitable
6# descriptions. Negative options (options that make some code not
7# compile) should be commented out; LINT (generated from NOTES) should
8# compile as much code as possible. Try to structure option-using
9# code so that a single option only switch code on, or only switch
10# code off, to make it possible to have a full compile-test. If
11# necessary, you can check for COMPILING_LINT to get maximum code
12# coverage.
13#
14# All new options shall also be listed in either "conf/options" or
15# "conf/options.<machine>". Options that affect a single source-file
16# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options
17# that affect multiple files should either go in "opt_global.h" if
18# this is a kernel-wide option (used just about everywhere), or in
19# "opt_<option-name-in-lower-case>.h" if it affects only some files.
20# Note that the effect of listing only an option without a
21# header-file-name in conf/options (and cousins) is that the last
22# convention is followed.
23#
24# This handling scheme is not yet fully implemented.
25#
26#
27# Format of this file:
28# Option name filename
29#
30# If filename is missing, the default is
31# opt_<name-of-option-in-lower-case>.h
32
33AAC_DEBUG opt_aac.h
34AHC_ALLOW_MEMIO opt_aic7xxx.h
35AHC_TMODE_ENABLE opt_aic7xxx.h
36AHC_DUMP_EEPROM opt_aic7xxx.h
37AHC_DEBUG opt_aic7xxx.h
38AHC_DEBUG_OPTS opt_aic7xxx.h
39AHC_REG_PRETTY_PRINT opt_aic7xxx.h
40AHD_DEBUG opt_aic79xx.h
41AHD_DEBUG_OPTS opt_aic79xx.h
42AHD_TMODE_ENABLE opt_aic79xx.h
43AHD_REG_PRETTY_PRINT opt_aic79xx.h
44ADW_ALLOW_MEMIO opt_adw.h
45
46TWA_DEBUG opt_twa.h
47TWA_FLASH_FIRMWARE opt_twa.h
48
49# Debugging options.
50DDB
51DDB_BUFR_SIZE opt_ddb.h
52DDB_CAPTURE_DEFAULTBUFSIZE opt_ddb.h
53DDB_CAPTURE_MAXBUFSIZE opt_ddb.h
54DDB_CTF opt_ddb.h
55DDB_NUMSYM opt_ddb.h
56GDB
57KDB opt_global.h
58KDB_TRACE opt_kdb.h
59KDB_UNATTENDED opt_kdb.h
60SYSCTL_DEBUG opt_sysctl.h
61
62# Miscellaneous options.
63ADAPTIVE_LOCKMGRS
64ALQ
65AUDIT opt_global.h
66CAPABILITIES opt_capabilities.h
67CODA_COMPAT_5 opt_coda.h
68COMPAT_43 opt_compat.h
69COMPAT_43TTY opt_compat.h
70COMPAT_FREEBSD4 opt_compat.h
71COMPAT_FREEBSD5 opt_compat.h
72COMPAT_FREEBSD6 opt_compat.h
73COMPAT_FREEBSD7 opt_compat.h
74COMPILING_LINT opt_global.h
75COMPRESS_USER_CORES opt_core.h
76CY_PCI_FASTINTR
77DEADLKRES opt_watchdog.h
78DIRECTIO
79FULL_PREEMPTION opt_sched.h
80IPI_PREEMPTION opt_sched.h
81GEOM_AES opt_geom.h
82GEOM_BDE opt_geom.h
83GEOM_BSD opt_geom.h
84GEOM_CACHE opt_geom.h
85GEOM_CONCAT opt_geom.h
86GEOM_ELI opt_geom.h
87GEOM_FOX opt_geom.h
88GEOM_GATE opt_geom.h
89GEOM_JOURNAL opt_geom.h
90GEOM_LABEL opt_geom.h
91GEOM_LINUX_LVM opt_geom.h
92GEOM_MBR opt_geom.h
93GEOM_MIRROR opt_geom.h
94GEOM_MULTIPATH opt_geom.h
95GEOM_NOP opt_geom.h
96GEOM_PART_APM opt_geom.h
97GEOM_PART_BSD opt_geom.h
98GEOM_PART_EBR opt_geom.h
99GEOM_PART_EBR_COMPAT opt_geom.h
100GEOM_PART_GPT opt_geom.h
101GEOM_PART_MBR opt_geom.h
102GEOM_PART_PC98 opt_geom.h
103GEOM_PART_VTOC8 opt_geom.h
104GEOM_PC98 opt_geom.h
105GEOM_RAID opt_geom.h
106GEOM_RAID3 opt_geom.h
107GEOM_SHSEC opt_geom.h
108GEOM_STRIPE opt_geom.h
109GEOM_SUNLABEL opt_geom.h
110GEOM_UZIP opt_geom.h
111GEOM_VIRSTOR opt_geom.h
112GEOM_VOL opt_geom.h
113GEOM_ZERO opt_geom.h
114KDTRACE_HOOKS opt_kdtrace.h
115KSTACK_MAX_PAGES
116KSTACK_PAGES
117KTRACE
118KTRACE_REQUEST_POOL opt_ktrace.h
119LIBICONV
120MAC opt_global.h
121MAC_BIBA opt_dontuse.h
122MAC_BSDEXTENDED opt_dontuse.h
123MAC_IFOFF opt_dontuse.h
124MAC_LOMAC opt_dontuse.h
125MAC_MLS opt_dontuse.h
126MAC_NONE opt_dontuse.h
127MAC_PARTITION opt_dontuse.h
128MAC_PORTACL opt_dontuse.h
129MAC_SEEOTHERUIDS opt_dontuse.h
130MAC_STATIC opt_mac.h
131MAC_STUB opt_dontuse.h
132MAC_TEST opt_dontuse.h
133MD_ROOT opt_md.h
134MD_ROOT_SIZE opt_md.h
135MFI_DEBUG opt_mfi.h
136MFI_DECODE_LOG opt_mfi.h
137MPROF_BUFFERS opt_mprof.h
138MPROF_HASH_SIZE opt_mprof.h
139NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h
140NO_ADAPTIVE_RWLOCKS
141NO_ADAPTIVE_SX
142NO_SYSCTL_DESCR opt_global.h
143NSWBUF_MIN opt_swap.h
144MBUF_PACKET_ZONE_DISABLE opt_global.h
145PANIC_REBOOT_WAIT_TIME opt_panic.h
146PPC_DEBUG opt_ppc.h
147PPC_PROBE_CHIPSET opt_ppc.h
148PPS_SYNC opt_ntp.h
149PREEMPTION opt_sched.h
150QUOTA
151SCHED_4BSD opt_sched.h
152SCHED_STATS opt_sched.h
153SCHED_ULE opt_sched.h
154SHOW_BUSYBUFS
155SLEEPQUEUE_PROFILING
156SLHCI_DEBUG opt_slhci.h
157SPX_HACK
158STACK opt_stack.h
159SUIDDIR
160MSGMNB opt_sysvipc.h
161MSGMNI opt_sysvipc.h
162MSGSEG opt_sysvipc.h
163MSGSSZ opt_sysvipc.h
164MSGTQL opt_sysvipc.h
165SEMMAP opt_sysvipc.h
166SEMMNI opt_sysvipc.h
167SEMMNS opt_sysvipc.h
168SEMMNU opt_sysvipc.h
169SEMMSL opt_sysvipc.h
170SEMOPM opt_sysvipc.h
171SEMUME opt_sysvipc.h
172SHMALL opt_sysvipc.h
173SHMMAX opt_sysvipc.h
174SHMMAXPGS opt_sysvipc.h
175SHMMIN opt_sysvipc.h
176SHMMNI opt_sysvipc.h
177SHMSEG opt_sysvipc.h
178SYSVMSG opt_sysvipc.h
179SYSVSEM opt_sysvipc.h
180SYSVSHM opt_sysvipc.h
181SW_WATCHDOG opt_watchdog.h
182TURNSTILE_PROFILING
183VFS_AIO
184VERBOSE_SYSINIT opt_global.h
185WLCACHE opt_wavelan.h
186WLDEBUG opt_wavelan.h
187
188# POSIX kernel options
189P1003_1B_MQUEUE opt_posix.h
190P1003_1B_SEMAPHORES opt_posix.h
191_KPOSIX_PRIORITY_SCHEDULING opt_posix.h
192
193# Do we want the config file compiled into the kernel?
194INCLUDE_CONFIG_FILE opt_config.h
195
196# Options for static filesystems. These should only be used at config
197# time, since the corresponding lkms cannot work if there are any static
198# dependencies. Unusability is enforced by hiding the defines for the
199# options in a never-included header.
200CD9660 opt_dontuse.h
201CODA opt_dontuse.h
202EXT2FS opt_dontuse.h
203FDESCFS opt_dontuse.h
204FFS opt_dontuse.h
205HPFS opt_dontuse.h
206MSDOSFS opt_dontuse.h
207NTFS opt_dontuse.h
208NULLFS opt_dontuse.h
209NWFS opt_dontuse.h
210PORTALFS opt_dontuse.h
211PROCFS opt_dontuse.h
212PSEUDOFS opt_dontuse.h
213REISERFS opt_dontuse.h
214SMBFS opt_dontuse.h
215TMPFS opt_dontuse.h
216UDF opt_dontuse.h
217UNIONFS opt_dontuse.h
218
219# Pseudofs debugging
220PSEUDOFS_TRACE opt_pseudofs.h
221
222# In-kernel GSS-API
223KGSSAPI opt_kgssapi.h
224KGSSAPI_DEBUG opt_kgssapi.h
225
226# These static filesystems have one slightly bogus static dependency in
227# sys/i386/i386/autoconf.c. If any of these filesystems are
228# statically compiled into the kernel, code for mounting them as root
229# filesystems will be enabled - but look below.
230NFSCLIENT opt_nfs.h
231NFSSERVER opt_nfs.h
232
233# Use these options to compile the experimental nfs client and/or
234# server that supports NFSv4 into a kernel.
235# NFSCL - client
236# NFSD - server
237NFSCL opt_nfs.h
238NFSD opt_nfs.h
239
240# filesystems and libiconv bridge
241CD9660_ICONV opt_dontuse.h
242MSDOSFS_ICONV opt_dontuse.h
243NTFS_ICONV opt_dontuse.h
244UDF_ICONV opt_dontuse.h
245
246# If you are following the conditions in the copyright,
247# you can enable soft-updates which will speed up a lot of thigs
248# and make the system safer from crashes at the same time.
249# otherwise a STUB module will be compiled in.
250SOFTUPDATES opt_ffs.h
251
252# On small, embedded systems, it can be useful to turn off support for
253# snapshots. It saves about 30-40k for a feature that would be lightly
254# used, if it is used at all.
255NO_FFS_SNAPSHOT opt_ffs.h
256
257# Enabling this option turns on support for Access Control Lists in UFS,
258# which can be used to support high security configurations. Depends on
259# UFS_EXTATTR.
260UFS_ACL opt_ufs.h
261
262# Enabling this option turns on support for extended attributes in UFS-based
263# filesystems, which can be used to support high security configurations
264# as well as new filesystem features.
265UFS_EXTATTR opt_ufs.h
266UFS_EXTATTR_AUTOSTART opt_ufs.h
267
268# Enable fast hash lookups for large directories on UFS-based filesystems.
269UFS_DIRHASH opt_ufs.h
270
271# Enable gjournal-based UFS journal.
272UFS_GJOURNAL opt_ufs.h
273
274# The below sentence is not in English, and neither is this one.
275# We plan to remove the static dependences above, with a
276# <filesystem>_ROOT option to control if it usable as root. This list
277# allows these options to be present in config files already (though
278# they won't make any difference yet).
279NFS_ROOT opt_nfsroot.h
280
281# SMB/CIFS requester
282NETSMB opt_netsmb.h
283
284# Options used only in subr_param.c.
285HZ opt_param.h
286MAXFILES opt_param.h
287NBUF opt_param.h
288NSFBUFS opt_param.h
289VM_BCACHE_SIZE_MAX opt_param.h
290VM_SWZONE_SIZE_MAX opt_param.h
291MAXUSERS
292DFLDSIZ opt_param.h
293MAXDSIZ opt_param.h
294MAXSSIZ opt_param.h
295
296# Generic SCSI options.
297CAM_MAX_HIGHPOWER opt_cam.h
298CAMDEBUG opt_cam.h
299CAM_DEBUG_DELAY opt_cam.h
300CAM_DEBUG_BUS opt_cam.h
301CAM_DEBUG_TARGET opt_cam.h
302CAM_DEBUG_LUN opt_cam.h
303CAM_DEBUG_FLAGS opt_cam.h
304SCSI_DELAY opt_scsi.h
305SCSI_NO_SENSE_STRINGS opt_scsi.h
306SCSI_NO_OP_STRINGS opt_scsi.h
307
308# Options used only in cam/scsi/scsi_cd.c
309CHANGER_MIN_BUSY_SECONDS opt_cd.h
310CHANGER_MAX_BUSY_SECONDS opt_cd.h
311
312# Options used only in cam/scsi/scsi_sa.c.
313SA_IO_TIMEOUT opt_sa.h
314SA_SPACE_TIMEOUT opt_sa.h
315SA_REWIND_TIMEOUT opt_sa.h
316SA_ERASE_TIMEOUT opt_sa.h
317SA_1FM_AT_EOD opt_sa.h
318
319# Options used only in cam/scsi/scsi_pt.c
320SCSI_PT_DEFAULT_TIMEOUT opt_pt.h
321
322# Options used only in cam/scsi/scsi_ses.c
323SES_ENABLE_PASSTHROUGH opt_ses.h
324
325# Options used in dev/sym/ (Symbios SCSI driver).
326SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits)
327 # Allows the ncr to take precedence
328 # 1 (1<<0) -> 810a, 860
329 # 2 (1<<1) -> 825a, 875, 885, 895
330 # 4 (1<<2) -> 895a, 896, 1510d
331SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885
332 # disabled:0 (default), enabled:1
333SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking
334 # disabled:0, enabled:1 (default)
335SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported
336 # default:8, range:[1..64]
337
338# Options used only in pci/ncr.c
339SCSI_NCR_DEBUG opt_ncr.h
340SCSI_NCR_MAX_SYNC opt_ncr.h
341SCSI_NCR_MAX_WIDE opt_ncr.h
342SCSI_NCR_MYADDR opt_ncr.h
343
344# Options used only in dev/isp/*
345ISP_TARGET_MODE opt_isp.h
346ISP_FW_CRASH_DUMP opt_isp.h
347ISP_DEFAULT_ROLES opt_isp.h
348ISP_INTERNAL_TARGET opt_isp.h
349
350# Options used only in dev/iscsi
351ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h
352
353# Options used in the 'ata' ATA/ATAPI driver
354ATA_STATIC_ID opt_ata.h
355ATA_NOPCI opt_ata.h
356ATA_REQUEST_TIMEOUT opt_ata.h
357ATA_CAM opt_ata.h
358
359# Net stuff.
360ACCEPT_FILTER_DATA
361ACCEPT_FILTER_DNS
362ACCEPT_FILTER_HTTP
363ALTQ opt_global.h
364ALTQ_CBQ opt_altq.h
365ALTQ_CDNR opt_altq.h
366ALTQ_DEBUG opt_altq.h
367ALTQ_HFSC opt_altq.h
368ALTQ_NOPCC opt_altq.h
369ALTQ_PRIQ opt_altq.h
370ALTQ_RED opt_altq.h
371ALTQ_RIO opt_altq.h
372BOOTP opt_bootp.h
373BOOTP_BLOCKSIZE opt_bootp.h
374BOOTP_COMPAT opt_bootp.h
375BOOTP_NFSROOT opt_bootp.h
376BOOTP_NFSV3 opt_bootp.h
377BOOTP_WIRED_TO opt_bootp.h
378DEVICE_POLLING
379DEV_ENC opt_enc.h
380DEV_PF opt_pf.h
381DEV_PFLOG opt_pf.h
382DEV_PFSYNC opt_pf.h
383DEV_VLAN opt_vlan.h
384DUMMYNET opt_ipdn.h
385ETHER_8022 opt_ef.h
386ETHER_8023 opt_ef.h
387ETHER_II opt_ef.h
388ETHER_SNAP opt_ef.h
389INET opt_inet.h
390INET6 opt_inet6.h
391IPDIVERT
392IPFILTER opt_ipfilter.h
393IPFILTER_DEFAULT_BLOCK opt_ipfilter.h
394IPFILTER_LOG opt_ipfilter.h
395IPFILTER_LOOKUP opt_ipfilter.h
396IPFIREWALL opt_ipfw.h
397IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h
398IPFIREWALL_FORWARD opt_ipfw.h
399IPFIREWALL_NAT opt_ipfw.h
400IPFIREWALL_VERBOSE opt_ipfw.h
401IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h
402IPSEC opt_ipsec.h
403IPSEC_DEBUG opt_ipsec.h
404IPSEC_FILTERTUNNEL opt_ipsec.h
405IPSEC_NAT_T opt_ipsec.h
406IPSTEALTH
407IPX
408KRPC
409LIBALIAS
410LIBMBPOOL
411LIBMCHAIN
412MBUF_PROFILING
413MBUF_STRESS_TEST
414MROUTING opt_mrouting.h
415NCP
416NETATALK opt_atalk.h
417NFSLOCKD
418RADIX_MPATH opt_mpath.h
419ROUTETABLES opt_route.h
420SLIP_IFF_OPTS opt_slip.h
421TCPDEBUG
422TCP_OFFLOAD_DISABLE opt_inet.h #Disable code to dispatch tcp offloading
423TCP_SIGNATURE opt_inet.h
424TCP_SORECEIVE_STREAM opt_inet.h
425VLAN_ARRAY opt_vlan.h
426XBONEHACK
427FLOWTABLE opt_route.h
428
429#
430# SCTP
431#
432SCTP opt_sctp.h
433SCTP_DEBUG opt_sctp.h # Enable debug printfs
434SCTP_WITH_NO_CSUM opt_sctp.h # Use this at your peril
435SCTP_LOCK_LOGGING opt_sctp.h # Log to KTR lock activity
436SCTP_MBUF_LOGGING opt_sctp.h # Log to KTR general mbuf aloc/free
437SCTP_MBCNT_LOGGING opt_sctp.h # Log to KTR mbcnt activity
438SCTP_PACKET_LOGGING opt_sctp.h # Log to a packet buffer last N packets
439SCTP_LTRACE_CHUNKS opt_sctp.h # Log to KTR chunks processed
440SCTP_LTRACE_ERRORS opt_sctp.h # Log to KTR error returns.
441SCTP_USE_PERCPU_STAT opt_sctp.h # Use per cpu stats.
442SCTP_MCORE_INPUT opt_sctp.h # Have multiple input threads for input mbufs
443#
444#
445#
446
447# Netgraph(4). Use option NETGRAPH to enable the base netgraph code.
448# Each netgraph node type can be either be compiled into the kernel
449# or loaded dynamically. To get the former, include the corresponding
450# option below. Each type has its own man page, e.g. ng_async(4).
451NETGRAPH
452NETGRAPH_DEBUG opt_netgraph.h
453NETGRAPH_ASYNC opt_netgraph.h
454NETGRAPH_ATMLLC opt_netgraph.h
455NETGRAPH_ATM_ATMPIF opt_netgraph.h
456NETGRAPH_BLUETOOTH opt_netgraph.h
457NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h
458NETGRAPH_BLUETOOTH_H4 opt_netgraph.h
459NETGRAPH_BLUETOOTH_HCI opt_netgraph.h
460NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h
461NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h
462NETGRAPH_BLUETOOTH_UBT opt_netgraph.h
463NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h
464NETGRAPH_BPF opt_netgraph.h
465NETGRAPH_BRIDGE opt_netgraph.h
466NETGRAPH_CAR opt_netgraph.h
467NETGRAPH_CISCO opt_netgraph.h
468NETGRAPH_DEFLATE opt_netgraph.h
469NETGRAPH_DEVICE opt_netgraph.h
470NETGRAPH_ECHO opt_netgraph.h
471NETGRAPH_EIFACE opt_netgraph.h
472NETGRAPH_ETHER opt_netgraph.h
473NETGRAPH_ETHER_ECHO opt_netgraph.h
474NETGRAPH_FEC opt_netgraph.h
475NETGRAPH_FRAME_RELAY opt_netgraph.h
476NETGRAPH_GIF opt_netgraph.h
477NETGRAPH_GIF_DEMUX opt_netgraph.h
478NETGRAPH_HOLE opt_netgraph.h
479NETGRAPH_IFACE opt_netgraph.h
480NETGRAPH_IP_INPUT opt_netgraph.h
481NETGRAPH_IPFW opt_netgraph.h
482NETGRAPH_KSOCKET opt_netgraph.h
483NETGRAPH_L2TP opt_netgraph.h
484NETGRAPH_LMI opt_netgraph.h
485# MPPC compression requires proprietary files (not included)
486NETGRAPH_MPPC_COMPRESSION opt_netgraph.h
487NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h
488NETGRAPH_NAT opt_netgraph.h
489NETGRAPH_NETFLOW opt_netgraph.h
490NETGRAPH_ONE2MANY opt_netgraph.h
491NETGRAPH_PATCH opt_netgraph.h
492NETGRAPH_PIPE opt_netgraph.h
493NETGRAPH_PPP opt_netgraph.h
494NETGRAPH_PPPOE opt_netgraph.h
495NETGRAPH_PPTPGRE opt_netgraph.h
496NETGRAPH_PRED1 opt_netgraph.h
497NETGRAPH_RFC1490 opt_netgraph.h
498NETGRAPH_SOCKET opt_netgraph.h
499NETGRAPH_SPLIT opt_netgraph.h
500NETGRAPH_SPPP opt_netgraph.h
501NETGRAPH_TAG opt_netgraph.h
502NETGRAPH_TCPMSS opt_netgraph.h
503NETGRAPH_TEE opt_netgraph.h
504NETGRAPH_TTY opt_netgraph.h
505NETGRAPH_UI opt_netgraph.h
506NETGRAPH_VJC opt_netgraph.h
507NETGRAPH_VLAN opt_netgraph.h
508
509# NgATM options
510NGATM_ATM opt_netgraph.h
511NGATM_ATMBASE opt_netgraph.h
512NGATM_SSCOP opt_netgraph.h
513NGATM_SSCFU opt_netgraph.h
514NGATM_UNI opt_netgraph.h
515NGATM_CCATM opt_netgraph.h
516
517# DRM options
518DRM_DEBUG opt_drm.h
519
520ZERO_COPY_SOCKETS opt_zero.h
521TI_PRIVATE_JUMBOS opt_ti.h
522TI_JUMBO_HDRSPLIT opt_ti.h
523BCE_JUMBO_HDRSPLIT opt_bce.h
524
525# XXX Conflict: # of devices vs network protocol (Native ATM).
526# This makes "atm.h" unusable.
527NATM
528
529# DPT driver debug flags
530DPT_MEASURE_PERFORMANCE opt_dpt.h
531DPT_HANDLE_TIMEOUTS opt_dpt.h
532DPT_TIMEOUT_FACTOR opt_dpt.h
533DPT_LOST_IRQ opt_dpt.h
534DPT_RESET_HBA opt_dpt.h
535
536# Misc debug flags. Most of these should probably be replaced with
537# 'DEBUG', and then let people recompile just the interesting modules
538# with 'make CC="cc -DDEBUG"'.
539CLUSTERDEBUG opt_debug_cluster.h
540DEBUG_1284 opt_ppb_1284.h
541VP0_DEBUG opt_vpo.h
542LPT_DEBUG opt_lpt.h
543PLIP_DEBUG opt_plip.h
544LOCKF_DEBUG opt_debug_lockf.h
545NETATALKDEBUG opt_atalk.h
546SI_DEBUG opt_debug_si.h
547
548# Fb options
549FB_DEBUG opt_fb.h
550FB_INSTALL_CDEV opt_fb.h
551
552# ppbus related options
553PERIPH_1284 opt_ppb_1284.h
554DONTPROBE_1284 opt_ppb_1284.h
555
556# smbus related options
557ENABLE_ALART opt_intpm.h
558
559# These cause changes all over the kernel
560BLKDEV_IOSIZE opt_global.h
561BURN_BRIDGES opt_global.h
562DEBUG opt_global.h
563DEBUG_LOCKS opt_global.h
564DEBUG_VFS_LOCKS opt_global.h
565DFLTPHYS opt_global.h
566DIAGNOSTIC opt_global.h
567INVARIANT_SUPPORT opt_global.h
568INVARIANTS opt_global.h
569MAXPHYS opt_global.h
570MCLSHIFT opt_global.h
571MUTEX_DEBUG opt_global.h
572MUTEX_NOINLINE opt_global.h
573LOCK_PROFILING opt_global.h
574LOCK_PROFILING_FAST opt_global.h
575MSIZE opt_global.h
576REGRESSION opt_global.h
577RESTARTABLE_PANICS opt_global.h
578RWLOCK_NOINLINE opt_global.h
579SX_NOINLINE opt_global.h
580VFS_BIO_DEBUG opt_global.h
581
582# These are VM related options
583VM_KMEM_SIZE opt_vm.h
584VM_KMEM_SIZE_SCALE opt_vm.h
585VM_KMEM_SIZE_MAX opt_vm.h
586VM_NRESERVLEVEL opt_vm.h
587VM_LEVEL_0_ORDER opt_vm.h
588NO_SWAPPING opt_vm.h
589MALLOC_MAKE_FAILURES opt_vm.h
590MALLOC_PROFILE opt_vm.h
591MALLOC_DEBUG_MAXZONES opt_vm.h
592
593# The MemGuard replacement allocator used for tamper-after-free detection
594DEBUG_MEMGUARD opt_vm.h
595
596# The RedZone malloc(9) protection
597DEBUG_REDZONE opt_vm.h
598
599# Standard SMP options
600SMP opt_global.h
601
602# Size of the kernel message buffer
603MSGBUF_SIZE opt_msgbuf.h
604
605# NFS options
606NFS_MINATTRTIMO opt_nfs.h
607NFS_MAXATTRTIMO opt_nfs.h
608NFS_MINDIRATTRTIMO opt_nfs.h
609NFS_MAXDIRATTRTIMO opt_nfs.h
610NFS_GATHERDELAY opt_nfs.h
611NFS_WDELAYHASHSIZ opt_nfs.h
612NFS_DEBUG opt_nfs.h
613
614# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver
615OVERRIDE_CARD opt_bktr.h
616OVERRIDE_TUNER opt_bktr.h
617OVERRIDE_DBX opt_bktr.h
618OVERRIDE_MSP opt_bktr.h
619BROOKTREE_SYSTEM_DEFAULT opt_bktr.h
620BROOKTREE_ALLOC_PAGES opt_bktr.h
621BKTR_OVERRIDE_CARD opt_bktr.h
622BKTR_OVERRIDE_TUNER opt_bktr.h
623BKTR_OVERRIDE_DBX opt_bktr.h
624BKTR_OVERRIDE_MSP opt_bktr.h
625BKTR_SYSTEM_DEFAULT opt_bktr.h
626BKTR_ALLOC_PAGES opt_bktr.h
627BKTR_USE_PLL opt_bktr.h
628BKTR_GPIO_ACCESS opt_bktr.h
629BKTR_NO_MSP_RESET opt_bktr.h
630BKTR_430_FX_MODE opt_bktr.h
631BKTR_SIS_VIA_MODE opt_bktr.h
632BKTR_USE_FREEBSD_SMBUS opt_bktr.h
633BKTR_NEW_MSP34XX_DRIVER opt_bktr.h
634
635BREAK_TO_DEBUGGER opt_comconsole.h
636ALT_BREAK_TO_DEBUGGER opt_comconsole.h
637
638# Options to support PPS
639UART_PPS_ON_CTS opt_uart.h
640
641# options for bus/device framework
642BUS_DEBUG opt_bus.h
643
644# options for USB support
645USB_DEBUG opt_usb.h
646USB_HOST_ALIGN opt_usb.h
647USB_REQ_DEBUG opt_usb.h
648USB_VERBOSE opt_usb.h
649USB_EHCI_BIG_ENDIAN_DESC opt_usb.h
650U3G_DEBUG opt_u3g.h
651UKBD_DFLT_KEYMAP opt_ukbd.h
652UPLCOM_INTR_INTERVAL opt_uplcom.h
653UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h
654UVSCOM_INTR_INTERVAL opt_uvscom.h
655
656# Embedded system options
657INIT_PATH
658
659ROOTDEVNAME
660
661FDC_DEBUG opt_fdc.h
662PCFCLOCK_VERBOSE opt_pcfclock.h
663PCFCLOCK_MAX_RETRIES opt_pcfclock.h
664
665KTR opt_global.h
666KTR_ALQ opt_ktr.h
667KTR_MASK opt_ktr.h
668KTR_CPUMASK opt_ktr.h
669KTR_COMPILE opt_global.h
670KTR_ENTRIES opt_global.h
671KTR_VERBOSE opt_ktr.h
672WITNESS opt_global.h
673WITNESS_KDB opt_witness.h
674WITNESS_SKIPSPIN opt_witness.h
675
676# options for ACPI support
677ACPI_DEBUG opt_acpi.h
678ACPI_MAX_TASKS opt_acpi.h
679ACPI_MAX_THREADS opt_acpi.h
680
681# ISA support
682DEV_ISA opt_isa.h
683ISAPNP opt_isa.h
684
685# various 'device presence' options.
686DEV_BPF opt_bpf.h
687DEV_MCA opt_mca.h
688DEV_CARP opt_carp.h
689DEV_SPLASH opt_splash.h
690
691# EISA support
692DEV_EISA opt_eisa.h
693EISA_SLOTS opt_eisa.h
694
695# ed driver
696ED_HPP opt_ed.h
697ED_3C503 opt_ed.h
698ED_SIC opt_ed.h
699
700# bce driver
701BCE_DEBUG opt_bce.h
702BCE_NVRAM_WRITE_SUPPORT opt_bce.h
703
704# bxe driver
705BXE_DEBUG opt_bxe.h
706BXE_NVRAM_WRITE_SUPPORT opt_bxe.h
707
708SOCKBUF_DEBUG opt_global.h
709
710
711# options for ubsec driver
712UBSEC_DEBUG opt_ubsec.h
713UBSEC_RNDTEST opt_ubsec.h
714UBSEC_NO_RNG opt_ubsec.h
715
716# options for hifn driver
717HIFN_DEBUG opt_hifn.h
718HIFN_RNDTEST opt_hifn.h
719
720# options for safenet driver
721SAFE_DEBUG opt_safe.h
722SAFE_NO_RNG opt_safe.h
723SAFE_RNDTEST opt_safe.h
724
725# syscons options
726MAXCONS opt_syscons.h
727SC_ALT_MOUSE_IMAGE opt_syscons.h
728SC_CUT_SPACES2TABS opt_syscons.h
729SC_CUT_SEPCHARS opt_syscons.h
730SC_DEBUG_LEVEL opt_syscons.h
731SC_DFLT_FONT opt_syscons.h
732SC_DISABLE_KDBKEY opt_syscons.h
733SC_DISABLE_REBOOT opt_syscons.h
734SC_HISTORY_SIZE opt_syscons.h
735SC_KERNEL_CONS_ATTR opt_syscons.h
736SC_KERNEL_CONS_REV_ATTR opt_syscons.h
737SC_MOUSE_CHAR opt_syscons.h
738SC_NO_CUTPASTE opt_syscons.h
739SC_NO_FONT_LOADING opt_syscons.h
740SC_NO_HISTORY opt_syscons.h
741SC_NO_MODE_CHANGE opt_syscons.h
742SC_NO_SUSPEND_VTYSWITCH opt_syscons.h
743SC_NO_SYSMOUSE opt_syscons.h
744SC_NORM_ATTR opt_syscons.h
745SC_NORM_REV_ATTR opt_syscons.h
746SC_PIXEL_MODE opt_syscons.h
747SC_RENDER_DEBUG opt_syscons.h
748SC_TWOBUTTON_MOUSE opt_syscons.h
749
750# teken terminal emulator options
751TEKEN_CONS25 opt_teken.h
752TEKEN_UTF8 opt_teken.h
753
754# options for printf
755PRINTF_BUFR_SIZE opt_printf.h
756
757# kbd options
758KBD_DISABLE_KEYMAP_LOAD opt_kbd.h
759KBD_INSTALL_CDEV opt_kbd.h
760KBD_MAXRETRY opt_kbd.h
761KBD_MAXWAIT opt_kbd.h
762KBD_RESETDELAY opt_kbd.h
763KBDIO_DEBUG opt_kbd.h
764
765# options for the Atheros driver
766ATH_DEBUG opt_ath.h
767ATH_TXBUF opt_ath.h
768ATH_RXBUF opt_ath.h
769ATH_DIAGAPI opt_ath.h
770ATH_TX99_DIAG opt_ath.h
771ATH_ENABLE_11N opt_ah.h
772
773# options for the Atheros hal
774AH_SUPPORT_AR5416 opt_ah.h
775
776AH_DEBUG opt_ah.h
777AH_ASSERT opt_ah.h
778AH_DEBUG_ALQ opt_ah.h
779AH_REGOPS_FUNC opt_ah.h
780AH_WRITE_REGDOMAIN opt_ah.h
781AH_DEBUG_COUNTRY opt_ah.h
782AH_WRITE_EEPROM opt_ah.h
783AH_PRIVATE_DIAG opt_ah.h
784AH_NEED_DESC_SWAP opt_ah.h
785AH_USE_INIPDGAIN opt_ah.h
786AH_MAXCHAN opt_ah.h
787AH_RXCFG_SDMAMW_4BYTES opt_ah.h
788
789# options for the Broadcom BCM43xx driver (bwi)
790BWI_DEBUG opt_bwi.h
791BWI_DEBUG_VERBOSE opt_bwi.h
792
793# options for the Marvell 8335 wireless driver
794MALO_DEBUG opt_malo.h
795MALO_TXBUF opt_malo.h
796MALO_RXBUF opt_malo.h
797
798# options for the Marvell wireless driver
799MWL_DEBUG opt_mwl.h
800MWL_TXBUF opt_mwl.h
801MWL_RXBUF opt_mwl.h
802MWL_DIAGAPI opt_mwl.h
803MWL_AGGR_SIZE opt_mwl.h
804MWL_TX_NODROP opt_mwl.h
805
806# dcons options
807DCONS_BUF_SIZE opt_dcons.h
808DCONS_POLL_HZ opt_dcons.h
809DCONS_FORCE_CONSOLE opt_dcons.h
810DCONS_FORCE_GDB opt_dcons.h
811
812# HWPMC options
813HWPMC_HOOKS
814
815# XBOX options for FreeBSD/i386, but some files are MI
816XBOX opt_xbox.h
817
818# XFS
819XFS
820
821# Interrupt filtering
822INTR_FILTER
823
824# 802.11 support layer
825IEEE80211_DEBUG opt_wlan.h
826IEEE80211_DEBUG_REFCNT opt_wlan.h
827IEEE80211_AMPDU_AGE opt_wlan.h
828IEEE80211_SUPPORT_MESH opt_wlan.h
829IEEE80211_SUPPORT_SUPERG opt_wlan.h
830IEEE80211_SUPPORT_TDMA opt_wlan.h
831
832# 802.11 TDMA support
833TDMA_SLOTLEN_DEFAULT opt_tdma.h
834TDMA_SLOTCNT_DEFAULT opt_tdma.h
835TDMA_BINTVAL_DEFAULT opt_tdma.h
836TDMA_TXRATE_11B_DEFAULT opt_tdma.h
837TDMA_TXRATE_11G_DEFAULT opt_tdma.h
838TDMA_TXRATE_11A_DEFAULT opt_tdma.h
839TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h
840TDMA_TXRATE_HALF_DEFAULT opt_tdma.h
841TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h
842TDMA_TXRATE_11NA_DEFAULT opt_tdma.h
843TDMA_TXRATE_11NG_DEFAULT opt_tdma.h
844
845# Network stack virtualization options
846VIMAGE opt_global.h
847VNET_DEBUG opt_global.h
848
849# Common Flash Interface (CFI) options
850CFI_SUPPORT_STRATAFLASH opt_cfi.h
851CFI_ARMEDANDDANGEROUS opt_cfi.h
852
853# Sound options
854SND_DEBUG opt_snd.h
855SND_DIAGNOSTIC opt_snd.h
856SND_FEEDER_MULTIFORMAT opt_snd.h
857SND_FEEDER_FULL_MULTIFORMAT opt_snd.h
858SND_FEEDER_RATE_HP opt_snd.h
859SND_PCM_64 opt_snd.h
860SND_OLDSTEREO opt_snd.h
861
862X86BIOS
863
864# Flattened device tree options
865FDT opt_platform.h
866FDT_DTB_STATIC opt_platform.h
867
868# OFED Infiniband stack
869OFED opt_ofed.h
870OFED_DEBUG_INIT opt_ofed.h
871SDP opt_ofed.h
872SDP_DEBUG opt_ofed.h
873IPOIB_DEBUG opt_ofed.h
874IPOIB_CM opt_ofed.h
875
|