1# $FreeBSD: head/sys/conf/NOTES 220137 2011-03-29 17:47:25Z trasz $
2#
3# NOTES -- Lines that can be cut/pasted into kernel and hints configs.
4#
5# Lines that begin with 'device', 'options', 'machine', 'ident', 'maxusers',
6# 'makeoptions', 'hints', etc. go into the kernel configuration that you
7# run config(8) with.
8#
9# Lines that begin with 'hint.' are NOT for config(8), they go into your
10# hints file. See /boot/device.hints and/or the 'hints' config(8) directive.
11#
12# Please use ``make LINT'' to create an old-style LINT file if you want to
13# do kernel test-builds.
14#
15# This file contains machine independent kernel configuration notes. For
16# machine dependent notes, look in /sys/<arch>/conf/NOTES.
17#
18
19#
20# NOTES conventions and style guide:
21#
22# Large block comments should begin and end with a line containing only a
23# comment character.
24#
25# To describe a particular object, a block comment (if it exists) should
26# come first. Next should come device, options, and hints lines in that
27# order. All device and option lines must be described by a comment that
28# doesn't just expand the device or option name. Use only a concise
29# comment on the same line if possible. Very detailed descriptions of
30# devices and subsystems belong in man pages.
31#
32# A space followed by a tab separates 'options' from an option name. Two
33# spaces followed by a tab separate 'device' from a device name. Comments
34# after an option or device should use one space after the comment character.
35# To comment out a negative option that disables code and thus should not be
36# enabled for LINT builds, precede 'options' with "#!".
37#
38
39#
40# This is the ``identification'' of the kernel. Usually this should
41# be the same as the name of your kernel.
42#
43ident LINT
44
45#
46# The `maxusers' parameter controls the static sizing of a number of
47# internal system tables by a formula defined in subr_param.c.
48# Omitting this parameter or setting it to 0 will cause the system to
49# auto-size based on physical memory.
50#
51maxusers 10
52
53# To statically compile in device wiring instead of /boot/device.hints
54#hints "LINT.hints" # Default places to look for devices.
55
56# Use the following to compile in values accessible to the kernel
57# through getenv() (or kenv(1) in userland). The format of the file
58# is 'variable=value', see kenv(1)
59#
60#env "LINT.env"
61
62#
63# The `makeoptions' parameter allows variables to be passed to the
64# generated Makefile in the build area.
65#
66# CONF_CFLAGS gives some extra compiler flags that are added to ${CFLAGS}
67# after most other flags. Here we use it to inhibit use of non-optimal
68# gcc built-in functions (e.g., memcmp).
69#
70# DEBUG happens to be magic.
71# The following is equivalent to 'config -g KERNELNAME' and creates
72# 'kernel.debug' compiled with -g debugging as well as a normal
73# 'kernel'. Use 'make install.debug' to install the debug kernel
74# but that isn't normally necessary as the debug symbols are not loaded
75# by the kernel and are not useful there anyway.
76#
77# KERNEL can be overridden so that you can change the default name of your
78# kernel.
79#
80# MODULES_OVERRIDE can be used to limit modules built to a specific list.
81#
82makeoptions CONF_CFLAGS=-fno-builtin #Don't allow use of memcmp, etc.
83#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
84#makeoptions KERNEL=foo #Build kernel "foo" and install "/foo"
85# Only build ext2fs module plus those parts of the sound system I need.
86#makeoptions MODULES_OVERRIDE="ext2fs sound/sound sound/driver/maestro3"
87makeoptions DESTDIR=/tmp
88
89#
90# FreeBSD processes are subject to certain limits to their consumption
91# of system resources. See getrlimit(2) for more details. Each
92# resource limit has two values, a "soft" limit and a "hard" limit.
93# The soft limits can be modified during normal system operation, but
94# the hard limits are set at boot time. Their default values are
95# in sys/<arch>/include/vmparam.h. There are two ways to change them:
96#
97# 1. Set the values at kernel build time. The options below are one
98# way to allow that limit to grow to 1GB. They can be increased
99# further by changing the parameters:
100#
101# 2. In /boot/loader.conf, set the tunables kern.maxswzone,
102# kern.maxbcache, kern.maxtsiz, kern.dfldsiz, kern.maxdsiz,
103# kern.dflssiz, kern.maxssiz and kern.sgrowsiz.
104#
105# The options in /boot/loader.conf override anything in the kernel
106# configuration file. See the function init_param1 in
107# sys/kern/subr_param.c for more details.
108#
109
110options MAXDSIZ=(1024UL*1024*1024)
111options MAXSSIZ=(128UL*1024*1024)
112options DFLDSIZ=(1024UL*1024*1024)
113
114#
115# BLKDEV_IOSIZE sets the default block size used in user block
116# device I/O. Note that this value will be overridden by the label
117# when specifying a block device from a label with a non-0
118# partition blocksize. The default is PAGE_SIZE.
119#
120options BLKDEV_IOSIZE=8192
121
122#
123# MAXPHYS and DFLTPHYS
124#
125# These are the maximal and safe 'raw' I/O block device access sizes.
126# Reads and writes will be split into MAXPHYS chunks for known good
127# devices and DFLTPHYS for the rest. Some applications have better
128# performance with larger raw I/O access sizes. Note that certain VM
129# parameters are derived from these values and making them too large
130# can make an an unbootable kernel.
131#
132# The defaults are 64K and 128K respectively.
133options DFLTPHYS=(64*1024)
134options MAXPHYS=(128*1024)
135
136
137# This allows you to actually store this configuration file into
138# the kernel binary itself. See config(8) for more details.
139#
140options INCLUDE_CONFIG_FILE # Include this file in kernel
141
142options GEOM_AES # Don't use, use GEOM_BDE
143options GEOM_BDE # Disk encryption.
144options GEOM_BSD # BSD disklabels
145options GEOM_CACHE # Disk cache.
146options GEOM_CONCAT # Disk concatenation.
147options GEOM_ELI # Disk encryption.
148options GEOM_FOX # Redundant path mitigation
149options GEOM_GATE # Userland services.
150options GEOM_JOURNAL # Journaling.
151options GEOM_LABEL # Providers labelization.
152options GEOM_LINUX_LVM # Linux LVM2 volumes
153options GEOM_MBR # DOS/MBR partitioning
154options GEOM_MIRROR # Disk mirroring.
155options GEOM_MULTIPATH # Disk multipath
156options GEOM_NOP # Test class.
157options GEOM_PART_APM # Apple partitioning
158options GEOM_PART_BSD # BSD disklabel
159options GEOM_PART_EBR # Extended Boot Records
160options GEOM_PART_EBR_COMPAT # Backward compatible partition names
161options GEOM_PART_GPT # GPT partitioning
162options GEOM_PART_MBR # MBR partitioning
163options GEOM_PART_PC98 # PC-9800 disk partitioning
164options GEOM_PART_VTOC8 # SMI VTOC8 disk label
165options GEOM_PC98 # NEC PC9800 partitioning
166options GEOM_RAID # Soft RAID functionality.
167options GEOM_RAID3 # RAID3 functionality.
168options GEOM_SHSEC # Shared secret.
169options GEOM_STRIPE # Disk striping.
170options GEOM_SUNLABEL # Sun/Solaris partitioning
171options GEOM_UZIP # Read-only compressed disks
172options GEOM_VIRSTOR # Virtual storage.
173options GEOM_VOL # Volume names from UFS superblock
174options GEOM_ZERO # Performance testing helper.
175
176#
177# The root device and filesystem type can be compiled in;
178# this provides a fallback option if the root device cannot
179# be correctly guessed by the bootstrap code, or an override if
180# the RB_DFLTROOT flag (-r) is specified when booting the kernel.
181#
182options ROOTDEVNAME=\"ufs:da0s2e\"
183
184
185#####################################################################
186# Scheduler options:
187#
188# Specifying one of SCHED_4BSD or SCHED_ULE is mandatory. These options
189# select which scheduler is compiled in.
190#
191# SCHED_4BSD is the historical, proven, BSD scheduler. It has a global run
192# queue and no CPU affinity which makes it suboptimal for SMP. It has very
193# good interactivity and priority selection.
194#
195# SCHED_ULE provides significant performance advantages over 4BSD on many
196# workloads on SMP machines. It supports cpu-affinity, per-cpu runqueues
197# and scheduler locks. It also has a stronger notion of interactivity
198# which leads to better responsiveness even on uniprocessor machines. This
199# is the default scheduler.
200#
201# SCHED_STATS is a debugging option which keeps some stats in the sysctl
202# tree at 'kern.sched.stats' and is useful for debugging scheduling decisions.
203#
204options SCHED_4BSD
205options SCHED_STATS
206#options SCHED_ULE
207
208#####################################################################
209# SMP OPTIONS:
210#
211# SMP enables building of a Symmetric MultiProcessor Kernel.
212
213# Mandatory:
214options SMP # Symmetric MultiProcessor Kernel
215
216# ADAPTIVE_MUTEXES changes the behavior of blocking mutexes to spin
217# if the thread that currently owns the mutex is executing on another
218# CPU. This behaviour is enabled by default, so this option can be used
219# to disable it.
220options NO_ADAPTIVE_MUTEXES
221
222# ADAPTIVE_RWLOCKS changes the behavior of reader/writer locks to spin
223# if the thread that currently owns the rwlock is executing on another
224# CPU. This behaviour is enabled by default, so this option can be used
225# to disable it.
226options NO_ADAPTIVE_RWLOCKS
227
228# ADAPTIVE_SX changes the behavior of sx locks to spin if the thread that
229# currently owns the sx lock is executing on another CPU.
230# This behaviour is enabled by default, so this option can be used to
231# disable it.
232options NO_ADAPTIVE_SX
233
234# MUTEX_NOINLINE forces mutex operations to call functions to perform each
235# operation rather than inlining the simple cases. This can be used to
236# shrink the size of the kernel text segment. Note that this behavior is
237# already implied by the INVARIANT_SUPPORT, INVARIANTS, KTR, LOCK_PROFILING,
238# and WITNESS options.
239options MUTEX_NOINLINE
240
241# RWLOCK_NOINLINE forces rwlock operations to call functions to perform each
242# operation rather than inlining the simple cases. This can be used to
243# shrink the size of the kernel text segment. Note that this behavior is
244# already implied by the INVARIANT_SUPPORT, INVARIANTS, KTR, LOCK_PROFILING,
245# and WITNESS options.
246options RWLOCK_NOINLINE
247
248# SX_NOINLINE forces sx lock operations to call functions to perform each
249# operation rather than inlining the simple cases. This can be used to
250# shrink the size of the kernel text segment. Note that this behavior is
251# already implied by the INVARIANT_SUPPORT, INVARIANTS, KTR, LOCK_PROFILING,
252# and WITNESS options.
253options SX_NOINLINE
254
255# SMP Debugging Options:
256#
257# PREEMPTION allows the threads that are in the kernel to be preempted by
258# higher priority [interrupt] threads. It helps with interactivity
259# and allows interrupt threads to run sooner rather than waiting.
260# WARNING! Only tested on amd64 and i386.
261# FULL_PREEMPTION instructs the kernel to preempt non-realtime kernel
262# threads. Its sole use is to expose race conditions and other
263# bugs during development. Enabling this option will reduce
264# performance and increase the frequency of kernel panics by
265# design. If you aren't sure that you need it then you don't.
266# Relies on the PREEMPTION option. DON'T TURN THIS ON.
267# MUTEX_DEBUG enables various extra assertions in the mutex code.
268# SLEEPQUEUE_PROFILING enables rudimentary profiling of the hash table
269# used to hold active sleep queues as well as sleep wait message
270# frequency.
271# TURNSTILE_PROFILING enables rudimentary profiling of the hash table
272# used to hold active lock queues.
273# WITNESS enables the witness code which detects deadlocks and cycles
274# during locking operations.
275# WITNESS_KDB causes the witness code to drop into the kernel debugger if
276# a lock hierarchy violation occurs or if locks are held when going to
277# sleep.
278# WITNESS_SKIPSPIN disables the witness checks on spin mutexes.
279options PREEMPTION
280options FULL_PREEMPTION
281options MUTEX_DEBUG
282options WITNESS
283options WITNESS_KDB
284options WITNESS_SKIPSPIN
285
286# LOCK_PROFILING - Profiling locks. See LOCK_PROFILING(9) for details.
287options LOCK_PROFILING
288# Set the number of buffers and the hash size. The hash size MUST be larger
289# than the number of buffers. Hash size should be prime.
290options MPROF_BUFFERS="1536"
291options MPROF_HASH_SIZE="1543"
292
293# Profiling for internal hash tables.
294options SLEEPQUEUE_PROFILING
295options TURNSTILE_PROFILING
296
297
298#####################################################################
299# COMPATIBILITY OPTIONS
300
301#
302# Implement system calls compatible with 4.3BSD and older versions of
303# FreeBSD. You probably do NOT want to remove this as much current code
304# still relies on the 4.3 emulation. Note that some architectures that
305# are supported by FreeBSD do not include support for certain important
306# aspects of this compatibility option, namely those related to the
307# signal delivery mechanism.
308#
309options COMPAT_43
310
311# Old tty interface.
312options COMPAT_43TTY
313
314# Note that as a general rule, COMPAT_FREEBSD<n> depends on
315# COMPAT_FREEBSD<n+1>, COMPAT_FREEBSD<n+2>, etc.
316
317# Enable FreeBSD4 compatibility syscalls
318options COMPAT_FREEBSD4
319
320# Enable FreeBSD5 compatibility syscalls
321options COMPAT_FREEBSD5
322
323# Enable FreeBSD6 compatibility syscalls
324options COMPAT_FREEBSD6
325
326# Enable FreeBSD7 compatibility syscalls
327options COMPAT_FREEBSD7
328
329#
330# These three options provide support for System V Interface
331# Definition-style interprocess communication, in the form of shared
332# memory, semaphores, and message queues, respectively.
333#
334options SYSVSHM
335options SYSVSEM
336options SYSVMSG
337
338
339#####################################################################
340# DEBUGGING OPTIONS
341
342#
343# Compile with kernel debugger related code.
344#
345options KDB
346
347#
348# Print a stack trace of the current thread on the console for a panic.
349#
350options KDB_TRACE
351
352#
353# Don't enter the debugger for a panic. Intended for unattended operation
354# where you may want to enter the debugger from the console, but still want
355# the machine to recover from a panic.
356#
357options KDB_UNATTENDED
358
359#
360# Enable the ddb debugger backend.
361#
362options DDB
363
364#
365# Print the numerical value of symbols in addition to the symbolic
366# representation.
367#
368options DDB_NUMSYM
369
370#
371# Enable the remote gdb debugger backend.
372#
373options GDB
374
375#
376# SYSCTL_DEBUG enables a 'sysctl' debug tree that can be used to dump the
377# contents of the registered sysctl nodes on the console. It is disabled by
378# default because it generates excessively verbose console output that can
379# interfere with serial console operation.
380#
381options SYSCTL_DEBUG
382
383#
384# NO_SYSCTL_DESCR omits the sysctl node descriptions to save space in the
385# resulting kernel.
386options NO_SYSCTL_DESCR
387
388#
389# MALLOC_DEBUG_MAXZONES enables multiple uma zones for malloc(9)
390# allocations that are smaller than a page. The purpose is to isolate
391# different malloc types into hash classes, so that any buffer
392# overruns or use-after-free will usually only affect memory from
393# malloc types in that hash class. This is purely a debugging tool;
394# by varying the hash function and tracking which hash class was
395# corrupted, the intersection of the hash classes from each instance
396# will point to a single malloc type that is being misused. At this
397# point inspection or memguard(9) can be used to catch the offending
398# code.
399#
400options MALLOC_DEBUG_MAXZONES=8
401
402#
403# DEBUG_MEMGUARD builds and enables memguard(9), a replacement allocator
404# for the kernel used to detect modify-after-free scenarios. See the
405# memguard(9) man page for more information on usage.
406#
407options DEBUG_MEMGUARD
408
409#
410# DEBUG_REDZONE enables buffer underflows and buffer overflows detection for
411# malloc(9).
412#
413options DEBUG_REDZONE
414
415#
416# KTRACE enables the system-call tracing facility ktrace(2). To be more
417# SMP-friendly, KTRACE uses a worker thread to process most trace events
418# asynchronously to the thread generating the event. This requires a
419# pre-allocated store of objects representing trace events. The
420# KTRACE_REQUEST_POOL option specifies the initial size of this store.
421# The size of the pool can be adjusted both at boottime and runtime via
422# the kern.ktrace_request_pool tunable and sysctl.
423#
424options KTRACE #kernel tracing
425options KTRACE_REQUEST_POOL=101
426
427#
428# KTR is a kernel tracing facility imported from BSD/OS. It is
429# enabled with the KTR option. KTR_ENTRIES defines the number of
430# entries in the circular trace buffer; it must be a power of two.
431# KTR_COMPILE defines the mask of events to compile into the kernel as
432# defined by the KTR_* constants in <sys/ktr.h>. KTR_MASK defines the
433# initial value of the ktr_mask variable which determines at runtime
434# what events to trace. KTR_CPUMASK determines which CPU's log
435# events, with bit X corresponding to CPU X. KTR_VERBOSE enables
436# dumping of KTR events to the console by default. This functionality
437# can be toggled via the debug.ktr_verbose sysctl and defaults to off
438# if KTR_VERBOSE is not defined. See ktr(4) and ktrdump(8) for details.
439#
440options KTR
441options KTR_ENTRIES=1024
442options KTR_COMPILE=(KTR_INTR|KTR_PROC)
443options KTR_MASK=KTR_INTR
444options KTR_CPUMASK=0x3
445options KTR_VERBOSE
446
447#
448# ALQ(9) is a facility for the asynchronous queuing of records from the kernel
449# to a vnode, and is employed by services such as ktr(4) to produce trace
450# files based on a kernel event stream. Records are written asynchronously
451# in a worker thread.
452#
453options ALQ
454options KTR_ALQ
455
456#
457# The INVARIANTS option is used in a number of source files to enable
458# extra sanity checking of internal structures. This support is not
459# enabled by default because of the extra time it would take to check
460# for these conditions, which can only occur as a result of
461# programming errors.
462#
463options INVARIANTS
464
465#
466# The INVARIANT_SUPPORT option makes us compile in support for
467# verifying some of the internal structures. It is a prerequisite for
468# 'INVARIANTS', as enabling 'INVARIANTS' will make these functions be
469# called. The intent is that you can set 'INVARIANTS' for single
470# source files (by changing the source file or specifying it on the
471# command line) if you have 'INVARIANT_SUPPORT' enabled. Also, if you
472# wish to build a kernel module with 'INVARIANTS', then adding
473# 'INVARIANT_SUPPORT' to your kernel will provide all the necessary
474# infrastructure without the added overhead.
475#
476options INVARIANT_SUPPORT
477
478#
479# The DIAGNOSTIC option is used to enable extra debugging information
480# from some parts of the kernel. As this makes everything more noisy,
481# it is disabled by default.
482#
483options DIAGNOSTIC
484
485#
486# REGRESSION causes optional kernel interfaces necessary only for regression
487# testing to be enabled. These interfaces may constitute security risks
488# when enabled, as they permit processes to easily modify aspects of the
489# run-time environment to reproduce unlikely or unusual (possibly normally
490# impossible) scenarios.
491#
492options REGRESSION
493
494#
495# RESTARTABLE_PANICS allows one to continue from a panic as if it were
496# a call to the debugger to continue from a panic as instead. It is only
497# useful if a kernel debugger is present. To restart from a panic, reset
498# the panicstr variable to NULL and continue execution. This option is
499# for development use only and should NOT be used in production systems
500# to "workaround" a panic.
501#
502#options RESTARTABLE_PANICS
503
504#
505# This option lets some drivers co-exist that can't co-exist in a running
506# system. This is used to be able to compile all kernel code in one go for
507# quality assurance purposes (like this file, which the option takes it name
508# from.)
509#
510options COMPILING_LINT
511
512#
513# STACK enables the stack(9) facility, allowing the capture of kernel stack
514# for the purpose of procinfo(1), etc. stack(9) will also be compiled in
515# automatically if DDB(4) is compiled into the kernel.
516#
517options STACK
518
519
520#####################################################################
521# PERFORMANCE MONITORING OPTIONS
522
523#
524# The hwpmc driver that allows the use of in-CPU performance monitoring
525# counters for performance monitoring. The base kernel needs to be configured
526# with the 'options' line, while the hwpmc device can be either compiled
527# in or loaded as a loadable kernel module.
528#
529# Additional configuration options may be required on specific architectures,
530# please see hwpmc(4).
531
532device hwpmc # Driver (also a loadable module)
533options HWPMC_HOOKS # Other necessary kernel hooks
534
535
536#####################################################################
537# NETWORKING OPTIONS
538
539#
540# Protocol families
541#
542options INET #Internet communications protocols
543options INET6 #IPv6 communications protocols
544
545options ROUTETABLES=2 # max 16. 1 is back compatible.
546
547# In order to enable IPSEC you MUST also add device crypto to
548# your kernel configuration
549options IPSEC #IP security (requires device crypto)
550#options IPSEC_DEBUG #debug for IP security
551#
552# #DEPRECATED#
553# Set IPSEC_FILTERTUNNEL to change the default of the sysctl to force packets
554# coming through a tunnel to be processed by any configured packet filtering
555# twice. The default is that packets coming out of a tunnel are _not_ processed;
556# they are assumed trusted.
557#
558# IPSEC history is preserved for such packets, and can be filtered
559# using ipfw(8)'s 'ipsec' keyword, when this option is enabled.
560#
561#options IPSEC_FILTERTUNNEL #filter ipsec packets from a tunnel
562#
563# Set IPSEC_NAT_T to enable NAT-Traversal support. This enables
564# optional UDP encapsulation of ESP packets.
565#
566options IPSEC_NAT_T #NAT-T support, UDP encap of ESP
567
568options IPX #IPX/SPX communications protocols
569
570options NCP #NetWare Core protocol
571
572options NETATALK #Appletalk communications protocols
573options NETATALKDEBUG #Appletalk debugging
574
575#
576# SMB/CIFS requester
577# NETSMB enables support for SMB protocol, it requires LIBMCHAIN and LIBICONV
578# options.
579options NETSMB #SMB/CIFS requester
580
581# mchain library. It can be either loaded as KLD or compiled into kernel
582options LIBMCHAIN
583
584# libalias library, performing NAT
585options LIBALIAS
586
587# flowtable cache
588options FLOWTABLE
589
590#
591# SCTP is a NEW transport protocol defined by
592# RFC2960 updated by RFC3309 and RFC3758.. and
593# soon to have a new base RFC and many many more
594# extensions. This release supports all the extensions
595# including many drafts (most about to become RFC's).
596# It is the reference implementation of SCTP
597# and is quite well tested.
598#
599# Note YOU MUST have both INET and INET6 defined.
600# You don't have to enable V6, but SCTP is
601# dual stacked and so far we have not torn apart
602# the V6 and V4.. since an association can span
603# both a V6 and V4 address at the SAME time :-)
604#
605options SCTP
606# There are bunches of options:
607# this one turns on all sorts of
608# nastly printing that you can
609# do. It's all controlled by a
610# bit mask (settable by socket opt and
611# by sysctl). Including will not cause
612# logging until you set the bits.. but it
613# can be quite verbose.. so without this
614# option we don't do any of the tests for
615# bits and prints.. which makes the code run
616# faster.. if you are not debugging don't use.
617options SCTP_DEBUG
618#
619# This option turns off the CRC32c checksum. Basically,
620# you will not be able to talk to anyone else who
621# has not done this. Its more for experimentation to
622# see how much CPU the CRC32c really takes. Most new
623# cards for TCP support checksum offload.. so this
624# option gives you a "view" into what SCTP would be
625# like with such an offload (which only exists in
626# high in iSCSI boards so far). With the new
627# splitting 8's algorithm its not as bad as it used
628# to be.. but it does speed things up try only
629# for in a captured lab environment :-)
630options SCTP_WITH_NO_CSUM
631#
632
633#
634# All that options after that turn on specific types of
635# logging. You can monitor CWND growth, flight size
636# and all sorts of things. Go look at the code and
637# see. I have used this to produce interesting
638# charts and graphs as well :->
639#
640# I have not yet committed the tools to get and print
641# the logs, I will do that eventually .. before then
642# if you want them send me an email rrs@freebsd.org
643# You basically must have ktr(4) enabled for these
644# and you then set the sysctl to turn on/off various
645# logging bits. Use ktrdump(8) to pull the log and run
646# it through a display program.. and graphs and other
647# things too.
648#
649options SCTP_LOCK_LOGGING
650options SCTP_MBUF_LOGGING
651options SCTP_MBCNT_LOGGING
652options SCTP_PACKET_LOGGING
653options SCTP_LTRACE_CHUNKS
654options SCTP_LTRACE_ERRORS
655
656
657# altq(9). Enable the base part of the hooks with the ALTQ option.
658# Individual disciplines must be built into the base system and can not be
659# loaded as modules at this point. ALTQ requires a stable TSC so if yours is
660# broken or changes with CPU throttling then you must also have the ALTQ_NOPCC
661# option.
662options ALTQ
663options ALTQ_CBQ # Class Based Queueing
664options ALTQ_RED # Random Early Detection
665options ALTQ_RIO # RED In/Out
666options ALTQ_HFSC # Hierarchical Packet Scheduler
667options ALTQ_CDNR # Traffic conditioner
668options ALTQ_PRIQ # Priority Queueing
669options ALTQ_NOPCC # Required if the TSC is unusable
670options ALTQ_DEBUG
671
672# netgraph(4). Enable the base netgraph code with the NETGRAPH option.
673# Individual node types can be enabled with the corresponding option
674# listed below; however, this is not strictly necessary as netgraph
675# will automatically load the corresponding KLD module if the node type
676# is not already compiled into the kernel. Each type below has a
677# corresponding man page, e.g., ng_async(8).
678options NETGRAPH # netgraph(4) system
679options NETGRAPH_DEBUG # enable extra debugging, this
680 # affects netgraph(4) and nodes
681# Node types
682options NETGRAPH_ASYNC
683options NETGRAPH_ATMLLC
684options NETGRAPH_ATM_ATMPIF
685options NETGRAPH_BLUETOOTH # ng_bluetooth(4)
686options NETGRAPH_BLUETOOTH_BT3C # ng_bt3c(4)
687options NETGRAPH_BLUETOOTH_HCI # ng_hci(4)
688options NETGRAPH_BLUETOOTH_L2CAP # ng_l2cap(4)
689options NETGRAPH_BLUETOOTH_SOCKET # ng_btsocket(4)
690options NETGRAPH_BLUETOOTH_UBT # ng_ubt(4)
691options NETGRAPH_BLUETOOTH_UBTBCMFW # ubtbcmfw(4)
692options NETGRAPH_BPF
693options NETGRAPH_BRIDGE
694options NETGRAPH_CAR
695options NETGRAPH_CISCO
696options NETGRAPH_DEFLATE
697options NETGRAPH_DEVICE
698options NETGRAPH_ECHO
699options NETGRAPH_EIFACE
700options NETGRAPH_ETHER
701options NETGRAPH_FEC
702options NETGRAPH_FRAME_RELAY
703options NETGRAPH_GIF
704options NETGRAPH_GIF_DEMUX
705options NETGRAPH_HOLE
706options NETGRAPH_IFACE
707options NETGRAPH_IP_INPUT
708options NETGRAPH_IPFW
709options NETGRAPH_KSOCKET
710options NETGRAPH_L2TP
711options NETGRAPH_LMI
712# MPPC compression requires proprietary files (not included)
713#options NETGRAPH_MPPC_COMPRESSION
714options NETGRAPH_MPPC_ENCRYPTION
715options NETGRAPH_NETFLOW
716options NETGRAPH_NAT
717options NETGRAPH_ONE2MANY
718options NETGRAPH_PATCH
719options NETGRAPH_PIPE
720options NETGRAPH_PPP
721options NETGRAPH_PPPOE
722options NETGRAPH_PPTPGRE
723options NETGRAPH_PRED1
724options NETGRAPH_RFC1490
725options NETGRAPH_SOCKET
726options NETGRAPH_SPLIT
727options NETGRAPH_SPPP
728options NETGRAPH_TAG
729options NETGRAPH_TCPMSS
730options NETGRAPH_TEE
731options NETGRAPH_UI
732options NETGRAPH_VJC
733options NETGRAPH_VLAN
734
735# NgATM - Netgraph ATM
736options NGATM_ATM
737options NGATM_ATMBASE
738options NGATM_SSCOP
739options NGATM_SSCFU
740options NGATM_UNI
741options NGATM_CCATM
742
743device mn # Munich32x/Falc54 Nx64kbit/sec cards.
744
745#
746# Network interfaces:
747# The `loop' device is MANDATORY when networking is enabled.
748device loop
749
750# The `ether' device provides generic code to handle
751# Ethernets; it is MANDATORY when an Ethernet device driver is
752# configured or token-ring is enabled.
753device ether
754
755# The `vlan' device implements the VLAN tagging of Ethernet frames
756# according to IEEE 802.1Q.
757device vlan
758
759# The `wlan' device provides generic code to support 802.11
760# drivers, including host AP mode; it is MANDATORY for the wi,
761# and ath drivers and will eventually be required by all 802.11 drivers.
762device wlan
763options IEEE80211_DEBUG #enable debugging msgs
764options IEEE80211_AMPDU_AGE #age frames in AMPDU reorder q's
765options IEEE80211_SUPPORT_MESH #enable 802.11s D3.0 support
766options IEEE80211_SUPPORT_TDMA #enable TDMA support
767
768# The `wlan_wep', `wlan_tkip', and `wlan_ccmp' devices provide
769# support for WEP, TKIP, and AES-CCMP crypto protocols optionally
770# used with 802.11 devices that depend on the `wlan' module.
771device wlan_wep
772device wlan_ccmp
773device wlan_tkip
774
775# The `wlan_xauth' device provides support for external (i.e. user-mode)
776# authenticators for use with 802.11 drivers that use the `wlan'
777# module and support 802.1x and/or WPA security protocols.
778device wlan_xauth
779
780# The `wlan_acl' device provides a MAC-based access control mechanism
781# for use with 802.11 drivers operating in ap mode and using the
782# `wlan' module.
783# The 'wlan_amrr' device provides AMRR transmit rate control algorithm
784device wlan_acl
785device wlan_amrr
786
787# Generic TokenRing
788device token
789
790# The `fddi' device provides generic code to support FDDI.
791device fddi
792
793# The `arcnet' device provides generic code to support Arcnet.
794device arcnet
795
796# The `sppp' device serves a similar role for certain types
797# of synchronous PPP links (like `cx', `ar').
798device sppp
799
800# The `bpf' device enables the Berkeley Packet Filter. Be
801# aware of the legal and administrative consequences of enabling this
802# option. DHCP requires bpf.
803device bpf
804
805# The `disc' device implements a minimal network interface,
806# which throws away all packets sent and never receives any. It is
807# included for testing and benchmarking purposes.
808device disc
809
810# The `epair' device implements a virtual back-to-back connected Ethernet
811# like interface pair.
812device epair
813
814# The `edsc' device implements a minimal Ethernet interface,
815# which discards all packets sent and receives none.
816device edsc
817
818# The `tap' device is a pty-like virtual Ethernet interface
819device tap
820
821# The `tun' device implements (user-)ppp and nos-tun(8)
822device tun
823
824# The `gif' device implements IPv6 over IP4 tunneling,
825# IPv4 over IPv6 tunneling, IPv4 over IPv4 tunneling and
826# IPv6 over IPv6 tunneling.
827# The `gre' device implements two types of IP4 over IP4 tunneling:
828# GRE and MOBILE, as specified in the RFC1701 and RFC2004.
829# The XBONEHACK option allows the same pair of addresses to be configured on
830# multiple gif interfaces.
831device gif
832device gre
833options XBONEHACK
834
835# The `faith' device captures packets sent to it and diverts them
836# to the IPv4/IPv6 translation daemon.
837# The `stf' device implements 6to4 encapsulation.
838device faith
839device stf
840
841# The `ef' device provides support for multiple ethernet frame types
842# specified via ETHER_* options. See ef(4) for details.
843device ef
844options ETHER_II # enable Ethernet_II frame
845options ETHER_8023 # enable Ethernet_802.3 (Novell) frame
846options ETHER_8022 # enable Ethernet_802.2 frame
847options ETHER_SNAP # enable Ethernet_802.2/SNAP frame
848
849# The pf packet filter consists of three devices:
850# The `pf' device provides /dev/pf and the firewall code itself.
851# The `pflog' device provides the pflog0 interface which logs packets.
852# The `pfsync' device provides the pfsync0 interface used for
853# synchronization of firewall state tables (over the net).
854device pf
855device pflog
856device pfsync
857
858# Bridge interface.
859device if_bridge
860
861# Common Address Redundancy Protocol. See carp(4) for more details.
862device carp
863
864# IPsec interface.
865device enc
866
867# Link aggregation interface.
868device lagg
869
870#
871# Internet family options:
872#
873# MROUTING enables the kernel multicast packet forwarder, which works
874# with mrouted and XORP.
875#
876# IPFIREWALL enables support for IP firewall construction, in
877# conjunction with the `ipfw' program. IPFIREWALL_VERBOSE sends
878# logged packets to the system logger. IPFIREWALL_VERBOSE_LIMIT
879# limits the number of times a matching entry can be logged.
880#
881# WARNING: IPFIREWALL defaults to a policy of "deny ip from any to any"
882# and if you do not add other rules during startup to allow access,
883# YOU WILL LOCK YOURSELF OUT. It is suggested that you set firewall_type=open
884# in /etc/rc.conf when first enabling this feature, then refining the
885# firewall rules in /etc/rc.firewall after you've tested that the new kernel
886# feature works properly.
887#
888# IPFIREWALL_DEFAULT_TO_ACCEPT causes the default rule (at boot) to
889# allow everything. Use with care, if a cracker can crash your
890# firewall machine, they can get to your protected machines. However,
891# if you are using it as an as-needed filter for specific problems as
892# they arise, then this may be for you. Changing the default to 'allow'
893# means that you won't get stuck if the kernel and /sbin/ipfw binary get
894# out of sync.
895#
896# IPDIVERT enables the divert IP sockets, used by ``ipfw divert''. It
897# depends on IPFIREWALL if compiled into the kernel.
898#
899# IPFIREWALL_FORWARD enables changing of the packet destination either
900# to do some sort of policy routing or transparent proxying. Used by
901# ``ipfw forward''. All redirections apply to locally generated
902# packets too. Because of this great care is required when
903# crafting the ruleset.
904#
905# IPFIREWALL_NAT adds support for in kernel nat in ipfw, and it requires
906# LIBALIAS.
907#
908# IPSTEALTH enables code to support stealth forwarding (i.e., forwarding
909# packets without touching the TTL). This can be useful to hide firewalls
910# from traceroute and similar tools.
911#
912# TCPDEBUG enables code which keeps traces of the TCP state machine
913# for sockets with the SO_DEBUG option set, which can then be examined
914# using the trpt(8) utility.
915#
916options MROUTING # Multicast routing
917options IPFIREWALL #firewall
918options IPFIREWALL_VERBOSE #enable logging to syslogd(8)
919options IPFIREWALL_VERBOSE_LIMIT=100 #limit verbosity
920options IPFIREWALL_DEFAULT_TO_ACCEPT #allow everything by default
921options IPFIREWALL_FORWARD #packet destination changes
922options IPFIREWALL_NAT #ipfw kernel nat support
923options IPDIVERT #divert sockets
924options IPFILTER #ipfilter support
925options IPFILTER_LOG #ipfilter logging
926options IPFILTER_LOOKUP #ipfilter pools
927options IPFILTER_DEFAULT_BLOCK #block all packets by default
928options IPSTEALTH #support for stealth forwarding
929options TCPDEBUG
930
931# The MBUF_STRESS_TEST option enables options which create
932# various random failures / extreme cases related to mbuf
933# functions. See mbuf(9) for a list of available test cases.
934# MBUF_PROFILING enables code to profile the mbuf chains
935# exiting the system (via participating interfaces) and
936# return a logarithmic histogram of monitored parameters
937# (e.g. packet size, wasted space, number of mbufs in chain).
938options MBUF_STRESS_TEST
939options MBUF_PROFILING
940
941# Statically link in accept filters
942options ACCEPT_FILTER_DATA
943options ACCEPT_FILTER_DNS
944options ACCEPT_FILTER_HTTP
945
946# TCP_SIGNATURE adds support for RFC 2385 (TCP-MD5) digests. These are
947# carried in TCP option 19. This option is commonly used to protect
948# TCP sessions (e.g. BGP) where IPSEC is not available nor desirable.
949# This is enabled on a per-socket basis using the TCP_MD5SIG socket option.
950# This requires the use of 'device crypto', 'options IPSEC'
951# or 'device cryptodev'.
952options TCP_SIGNATURE #include support for RFC 2385
953
954# DUMMYNET enables the "dummynet" bandwidth limiter. You need IPFIREWALL
955# as well. See dummynet(4) and ipfw(8) for more info. When you run
956# DUMMYNET it is advisable to also have at least "options HZ=1000" to achieve
957# a smooth scheduling of the traffic.
958options DUMMYNET
959
960# Zero copy sockets support. This enables "zero copy" for sending and
961# receiving data via a socket. The send side works for any type of NIC,
962# the receive side only works for NICs that support MTUs greater than the
963# page size of your architecture and that support header splitting. See
964# zero_copy(9) for more details.
965options ZERO_COPY_SOCKETS
966
967#####################################################################
968# FILESYSTEM OPTIONS
969
970#
971# Only the root, /usr, and /tmp filesystems need be statically
972# compiled; everything else will be automatically loaded at mount
973# time. (Exception: the UFS family--- FFS --- cannot
974# currently be demand-loaded.) Some people still prefer to statically
975# compile other filesystems as well.
976#
977# NB: The PORTAL filesystem is known to be buggy, and WILL panic your
978# system if you attempt to do anything with it. It is included here
979# as an incentive for some enterprising soul to sit down and fix it.
980# The UNION filesystem was known to be buggy in the past. It is now
981# being actively maintained, although there are still some issues being
982# resolved.
983#
984
985# One of these is mandatory:
986options FFS #Fast filesystem
987options NFSCLIENT #Network File System client
988
989# The rest are optional:
990options CD9660 #ISO 9660 filesystem
991options FDESCFS #File descriptor filesystem
992options HPFS #OS/2 File system
993options MSDOSFS #MS DOS File System (FAT, FAT32)
994options NFSSERVER #Network File System server
995options NFSLOCKD #Network Lock Manager
996options NFSCL #experimental NFS client with NFSv4
997options NFSD #experimental NFS server with NFSv4
998options KGSSAPI #Kernel GSSAPI implementation
999
1000# NT File System. Read-mostly, see mount_ntfs(8) for details.
1001# For a full read-write NTFS support consider sysutils/fusefs-ntfs
1002# port/package.
1003options NTFS
1004
1005options NULLFS #NULL filesystem
1006# Broken (depends on NCP):
1007#options NWFS #NetWare filesystem
1008options PORTALFS #Portal filesystem
1009options PROCFS #Process filesystem (requires PSEUDOFS)
1010options PSEUDOFS #Pseudo-filesystem framework
1011options PSEUDOFS_TRACE #Debugging support for PSEUDOFS
1012options SMBFS #SMB/CIFS filesystem
1013options TMPFS #Efficient memory filesystem
1014options UDF #Universal Disk Format
1015options UNIONFS #Union filesystem
1016# The xFS_ROOT options REQUIRE the associated ``options xFS''
1017options NFS_ROOT #NFS usable as root device
1018
1019# Soft updates is a technique for improving filesystem speed and
1020# making abrupt shutdown less risky.
1021#
1022options SOFTUPDATES
1023
1024# Extended attributes allow additional data to be associated with files,
1025# and is used for ACLs, Capabilities, and MAC labels.
1026# See src/sys/ufs/ufs/README.extattr for more information.
1027options UFS_EXTATTR
1028options UFS_EXTATTR_AUTOSTART
1029
1030# Access Control List support for UFS filesystems. The current ACL
1031# implementation requires extended attribute support, UFS_EXTATTR,
1032# for the underlying filesystem.
1033# See src/sys/ufs/ufs/README.acls for more information.
1034options UFS_ACL
1035
1036# Directory hashing improves the speed of operations on very large
1037# directories at the expense of some memory.
1038options UFS_DIRHASH
1039
1040# Gjournal-based UFS journaling support.
1041options UFS_GJOURNAL
1042
1043# Make space in the kernel for a root filesystem on a md device.
1044# Define to the number of kilobytes to reserve for the filesystem.
1045options MD_ROOT_SIZE=10
1046
1047# Make the md device a potential root device, either with preloaded
1048# images of type mfs_root or md_root.
1049options MD_ROOT
1050
1051# Disk quotas are supported when this option is enabled.
1052options QUOTA #enable disk quotas
1053
1054# If you are running a machine just as a fileserver for PC and MAC
1055# users, using SAMBA or Netatalk, you may consider setting this option
1056# and keeping all those users' directories on a filesystem that is
1057# mounted with the suiddir option. This gives new files the same
1058# ownership as the directory (similar to group). It's a security hole
1059# if you let these users run programs, so confine it to file-servers
1060# (but it'll save you lots of headaches in those cases). Root owned
1061# directories are exempt and X bits are cleared. The suid bit must be
1062# set on the directory as well; see chmod(1). PC owners can't see/set
1063# ownerships so they keep getting their toes trodden on. This saves
1064# you all the support calls as the filesystem it's used on will act as
1065# they expect: "It's my dir so it must be my file".
1066#
1067options SUIDDIR
1068
1069# NFS options:
1070options NFS_MINATTRTIMO=3 # VREG attrib cache timeout in sec
1071options NFS_MAXATTRTIMO=60
1072options NFS_MINDIRATTRTIMO=30 # VDIR attrib cache timeout in sec
1073options NFS_MAXDIRATTRTIMO=60
1074options NFS_GATHERDELAY=10 # Default write gather delay (msec)
1075options NFS_WDELAYHASHSIZ=16 # and with this
1076options NFS_DEBUG # Enable NFS Debugging
1077
1078# Coda stuff:
1079options CODA #CODA filesystem.
1080device vcoda #coda minicache <-> venus comm.
1081# Use the old Coda 5.x venus<->kernel interface instead of the new
1082# realms-aware 6.x protocol.
1083#options CODA_COMPAT_5
1084
1085#
1086# Add support for the EXT2FS filesystem of Linux fame. Be a bit
1087# careful with this - the ext2fs code has a tendency to lag behind
1088# changes and not be exercised very much, so mounting read/write could
1089# be dangerous (and even mounting read only could result in panics.)
1090#
1091options EXT2FS
1092
1093#
1094# Add support for the ReiserFS filesystem (used in Linux). Currently,
1095# this is limited to read-only access.
1096#
1097options REISERFS
1098
1099#
1100# Add support for the SGI XFS filesystem. Currently,
1101# this is limited to read-only access.
1102#
1103options XFS
1104
1105# Use real implementations of the aio_* system calls. There are numerous
1106# stability and security issues in the current aio code that make it
1107# unsuitable for inclusion on machines with untrusted local users.
1108options VFS_AIO
1109
1110# Cryptographically secure random number generator; /dev/random
1111device random
1112
1113# The system memory devices; /dev/mem, /dev/kmem
1114device mem
1115
1116# The kernel symbol table device; /dev/ksyms
1117device ksyms
1118
1119# Optional character code conversion support with LIBICONV.
1120# Each option requires their base file system and LIBICONV.
1121options CD9660_ICONV
1122options MSDOSFS_ICONV
1123options NTFS_ICONV
1124options UDF_ICONV
1125
1126
1127#####################################################################
1128# POSIX P1003.1B
1129
1130# Real time extensions added in the 1993 POSIX
1131# _KPOSIX_PRIORITY_SCHEDULING: Build in _POSIX_PRIORITY_SCHEDULING
1132
1133options _KPOSIX_PRIORITY_SCHEDULING
1134# p1003_1b_semaphores are very experimental,
1135# user should be ready to assist in debugging if problems arise.
1136options P1003_1B_SEMAPHORES
1137
1138# POSIX message queue
1139options P1003_1B_MQUEUE
1140
1141#####################################################################
1142# SECURITY POLICY PARAMETERS
1143
1144# Support for BSM audit
1145options AUDIT
1146
1147# Support for Mandatory Access Control (MAC):
1148options MAC
1149options MAC_BIBA
1150options MAC_BSDEXTENDED
1151options MAC_IFOFF
1152options MAC_LOMAC
1153options MAC_MLS
1154options MAC_NONE
1155options MAC_PARTITION
1156options MAC_PORTACL
1157options MAC_SEEOTHERUIDS
1158options MAC_STUB
1159options MAC_TEST
1160
1161# Support for Capsicum
1162options CAPABILITIES
1163
1164
1165#####################################################################
1166# CLOCK OPTIONS
1167
1168# The granularity of operation is controlled by the kernel option HZ whose
1169# default value (1000 on most architectures) means a granularity of 1ms
1170# (1s/HZ). Historically, the default was 100, but finer granularity is
1171# required for DUMMYNET and other systems on modern hardware. There are
1172# reasonable arguments that HZ should, in fact, be 100 still; consider,
1173# that reducing the granularity too much might cause excessive overhead in
1174# clock interrupt processing, potentially causing ticks to be missed and thus
1175# actually reducing the accuracy of operation.
1176
1177options HZ=100
1178
1179# Enable support for the kernel PLL to use an external PPS signal,
1180# under supervision of [x]ntpd(8)
1181# More info in ntpd documentation: http://www.eecis.udel.edu/~ntp
1182
1183options PPS_SYNC
1184
1185
1186#####################################################################
1187# SCSI DEVICES
1188
1189# SCSI DEVICE CONFIGURATION
1190
1191# The SCSI subsystem consists of the `base' SCSI code, a number of
1192# high-level SCSI device `type' drivers, and the low-level host-adapter
1193# device drivers. The host adapters are listed in the ISA and PCI
1194# device configuration sections below.
1195#
1196# It is possible to wire down your SCSI devices so that a given bus,
1197# target, and LUN always come on line as the same device unit. In
1198# earlier versions the unit numbers were assigned in the order that
1199# the devices were probed on the SCSI bus. This means that if you
1200# removed a disk drive, you may have had to rewrite your /etc/fstab
1201# file, and also that you had to be careful when adding a new disk
1202# as it may have been probed earlier and moved your device configuration
1203# around. (See also option GEOM_VOL for a different solution to this
1204# problem.)
1205
1206# This old behavior is maintained as the default behavior. The unit
1207# assignment begins with the first non-wired down unit for a device
1208# type. For example, if you wire a disk as "da3" then the first
1209# non-wired disk will be assigned da4.
1210
1211# The syntax for wiring down devices is:
1212
1213hint.scbus.0.at="ahc0"
1214hint.scbus.1.at="ahc1"
1215hint.scbus.1.bus="0"
1216hint.scbus.3.at="ahc2"
1217hint.scbus.3.bus="0"
1218hint.scbus.2.at="ahc2"
1219hint.scbus.2.bus="1"
1220hint.da.0.at="scbus0"
1221hint.da.0.target="0"
1222hint.da.0.unit="0"
1223hint.da.1.at="scbus3"
1224hint.da.1.target="1"
1225hint.da.2.at="scbus2"
1226hint.da.2.target="3"
1227hint.sa.1.at="scbus1"
1228hint.sa.1.target="6"
1229
1230# "units" (SCSI logical unit number) that are not specified are
1231# treated as if specified as LUN 0.
1232
1233# All SCSI devices allocate as many units as are required.
1234
1235# The ch driver drives SCSI Media Changer ("jukebox") devices.
1236#
1237# The da driver drives SCSI Direct Access ("disk") and Optical Media
1238# ("WORM") devices.
1239#
1240# The sa driver drives SCSI Sequential Access ("tape") devices.
1241#
1242# The cd driver drives SCSI Read Only Direct Access ("cd") devices.
1243#
1244# The ses driver drives SCSI Environment Services ("ses") and
1245# SAF-TE ("SCSI Accessible Fault-Tolerant Enclosure") devices.
1246#
1247# The pt driver drives SCSI Processor devices.
1248#
1249# The sg driver provides a passthrough API that is compatible with the
1250# Linux SG driver. It will work in conjunction with the COMPAT_LINUX
1251# option to run linux SG apps. It can also stand on its own and provide
1252# source level API compatiblity for porting apps to FreeBSD.
1253#
1254# Target Mode support is provided here but also requires that a SIM
1255# (SCSI Host Adapter Driver) provide support as well.
1256#
1257# The targ driver provides target mode support as a Processor type device.
1258# It exists to give the minimal context necessary to respond to Inquiry
1259# commands. There is a sample user application that shows how the rest
1260# of the command support might be done in /usr/share/examples/scsi_target.
1261#
1262# The targbh driver provides target mode support and exists to respond
1263# to incoming commands that do not otherwise have a logical unit assigned
1264# to them.
1265#
1266# The "unknown" device (uk? in pre-2.0.5) is now part of the base SCSI
1267# configuration as the "pass" driver.
1268
1269device scbus #base SCSI code
1270device ch #SCSI media changers
1271device da #SCSI direct access devices (aka disks)
1272device sa #SCSI tapes
1273device cd #SCSI CD-ROMs
1274device ses #SCSI Environmental Services (and SAF-TE)
1275device pt #SCSI processor
1276device targ #SCSI Target Mode Code
1277device targbh #SCSI Target Mode Blackhole Device
1278device pass #CAM passthrough driver
1279device sg #Linux SCSI passthrough
1280
1281# CAM OPTIONS:
1282# debugging options:
1283# -- NOTE -- If you specify one of the bus/target/lun options, you must
1284# specify them all!
1285# CAMDEBUG: When defined enables debugging macros
1286# CAM_DEBUG_BUS: Debug the given bus. Use -1 to debug all busses.
1287# CAM_DEBUG_TARGET: Debug the given target. Use -1 to debug all targets.
1288# CAM_DEBUG_LUN: Debug the given lun. Use -1 to debug all luns.
1289# CAM_DEBUG_FLAGS: OR together CAM_DEBUG_INFO, CAM_DEBUG_TRACE,
1290# CAM_DEBUG_SUBTRACE, and CAM_DEBUG_CDB
1291#
1292# CAM_MAX_HIGHPOWER: Maximum number of concurrent high power (start unit) cmds
1293# SCSI_NO_SENSE_STRINGS: When defined disables sense descriptions
1294# SCSI_NO_OP_STRINGS: When defined disables opcode descriptions
1295# SCSI_DELAY: The number of MILLISECONDS to freeze the SIM (scsi adapter)
1296# queue after a bus reset, and the number of milliseconds to
1297# freeze the device queue after a bus device reset. This
1298# can be changed at boot and runtime with the
1299# kern.cam.scsi_delay tunable/sysctl.
1300options CAMDEBUG
1301options CAM_DEBUG_BUS=-1
1302options CAM_DEBUG_TARGET=-1
1303options CAM_DEBUG_LUN=-1
1304options CAM_DEBUG_FLAGS=(CAM_DEBUG_INFO|CAM_DEBUG_TRACE|CAM_DEBUG_CDB)
1305options CAM_MAX_HIGHPOWER=4
1306options SCSI_NO_SENSE_STRINGS
1307options SCSI_NO_OP_STRINGS
1308options SCSI_DELAY=5000 # Be pessimistic about Joe SCSI device
1309
1310# Options for the CAM CDROM driver:
1311# CHANGER_MIN_BUSY_SECONDS: Guaranteed minimum time quantum for a changer LUN
1312# CHANGER_MAX_BUSY_SECONDS: Maximum time quantum per changer LUN, only
1313# enforced if there is I/O waiting for another LUN
1314# The compiled in defaults for these variables are 2 and 10 seconds,
1315# respectively.
1316#
1317# These can also be changed on the fly with the following sysctl variables:
1318# kern.cam.cd.changer.min_busy_seconds
1319# kern.cam.cd.changer.max_busy_seconds
1320#
1321options CHANGER_MIN_BUSY_SECONDS=2
1322options CHANGER_MAX_BUSY_SECONDS=10
1323
1324# Options for the CAM sequential access driver:
1325# SA_IO_TIMEOUT: Timeout for read/write/wfm operations, in minutes
1326# SA_SPACE_TIMEOUT: Timeout for space operations, in minutes
1327# SA_REWIND_TIMEOUT: Timeout for rewind operations, in minutes
1328# SA_ERASE_TIMEOUT: Timeout for erase operations, in minutes
1329# SA_1FM_AT_EOD: Default to model which only has a default one filemark at EOT.
1330options SA_IO_TIMEOUT=4
1331options SA_SPACE_TIMEOUT=60
1332options SA_REWIND_TIMEOUT=(2*60)
1333options SA_ERASE_TIMEOUT=(4*60)
1334options SA_1FM_AT_EOD
1335
1336# Optional timeout for the CAM processor target (pt) device
1337# This is specified in seconds. The default is 60 seconds.
1338options SCSI_PT_DEFAULT_TIMEOUT=60
1339
1340# Optional enable of doing SES passthrough on other devices (e.g., disks)
1341#
1342# Normally disabled because a lot of newer SCSI disks report themselves
1343# as having SES capabilities, but this can then clot up attempts to build
1344# a topology with the SES device that's on the box these drives are in....
1345options SES_ENABLE_PASSTHROUGH
1346
1347
1348#####################################################################
1349# MISCELLANEOUS DEVICES AND OPTIONS
1350
1351device pty #BSD-style compatibility pseudo ttys
1352device nmdm #back-to-back tty devices
1353device md #Memory/malloc disk
1354device snp #Snoop device - to look at pty/vty/etc..
1355device ccd #Concatenated disk driver
1356device firmware #firmware(9) support
1357
1358# Kernel side iconv library
1359options LIBICONV
1360
1361# Size of the kernel message buffer. Should be N * pagesize.
1362options MSGBUF_SIZE=40960
1363
1364
1365#####################################################################
1366# HARDWARE DEVICE CONFIGURATION
1367
1368# For ISA the required hints are listed.
1369# EISA, MCA, PCI, CardBus, SD/MMC and pccard are self identifying buses, so
1370# no hints are needed.
1371
1372#
1373# Mandatory devices:
1374#
1375
1376# These options are valid for other keyboard drivers as well.
1377options KBD_DISABLE_KEYMAP_LOAD # refuse to load a keymap
1378options KBD_INSTALL_CDEV # install a CDEV entry in /dev
1379
1380options FB_DEBUG # Frame buffer debugging
1381
1382device splash # Splash screen and screen saver support
1383
1384# Various screen savers.
1385device blank_saver
1386device daemon_saver
1387device dragon_saver
1388device fade_saver
1389device fire_saver
1390device green_saver
1391device logo_saver
1392device rain_saver
1393device snake_saver
1394device star_saver
1395device warp_saver
1396
1397# The syscons console driver (SCO color console compatible).
1398device sc
1399hint.sc.0.at="isa"
1400options MAXCONS=16 # number of virtual consoles
1401options SC_ALT_MOUSE_IMAGE # simplified mouse cursor in text mode
1402options SC_DFLT_FONT # compile font in
1403makeoptions SC_DFLT_FONT=cp850
1404options SC_DISABLE_KDBKEY # disable `debug' key
1405options SC_DISABLE_REBOOT # disable reboot key sequence
1406options SC_HISTORY_SIZE=200 # number of history buffer lines
1407options SC_MOUSE_CHAR=0x3 # char code for text mode mouse cursor
1408options SC_PIXEL_MODE # add support for the raster text mode
1409
1410# The following options will let you change the default colors of syscons.
1411options SC_NORM_ATTR=(FG_GREEN|BG_BLACK)
1412options SC_NORM_REV_ATTR=(FG_YELLOW|BG_GREEN)
1413options SC_KERNEL_CONS_ATTR=(FG_RED|BG_BLACK)
1414options SC_KERNEL_CONS_REV_ATTR=(FG_BLACK|BG_RED)
1415
1416# The following options will let you change the default behaviour of
1417# cut-n-paste feature
1418options SC_CUT_SPACES2TABS # convert leading spaces into tabs
1419options SC_CUT_SEPCHARS=\"x09\" # set of characters that delimit words
1420 # (default is single space - \"x20\")
1421
1422# If you have a two button mouse, you may want to add the following option
1423# to use the right button of the mouse to paste text.
1424options SC_TWOBUTTON_MOUSE
1425
1426# You can selectively disable features in syscons.
1427options SC_NO_CUTPASTE
1428options SC_NO_FONT_LOADING
1429options SC_NO_HISTORY
1430options SC_NO_MODE_CHANGE
1431options SC_NO_SYSMOUSE
1432options SC_NO_SUSPEND_VTYSWITCH
1433
1434# `flags' for sc
1435# 0x80 Put the video card in the VESA 800x600 dots, 16 color mode
1436# 0x100 Probe for a keyboard device periodically if one is not present
1437
1438# Enable experimental features of the syscons terminal emulator (teken).
1439options TEKEN_CONS25 # cons25-style terminal emulation
1440options TEKEN_UTF8 # UTF-8 output handling
1441
1442#
1443# Optional devices:
1444#
1445
1446#
1447# SCSI host adapters:
1448#
1449# adv: All Narrow SCSI bus AdvanSys controllers.
1450# adw: Second Generation AdvanSys controllers including the ADV940UW.
1451# aha: Adaptec 154x/1535/1640
1452# ahb: Adaptec 174x EISA controllers
1453# ahc: Adaptec 274x/284x/2910/293x/294x/394x/3950x/3960x/398X/4944/
1454# 19160x/29160x, aic7770/aic78xx
1455# ahd: Adaptec 29320/39320 Controllers.
1456# aic: Adaptec 6260/6360, APA-1460 (PC Card), NEC PC9801-100 (C-BUS)
1457# amd: Support for the AMD 53C974 SCSI host adapter chip as found on devices
1458# such as the Tekram DC-390(T).
1459# bt: Most Buslogic controllers: including BT-445, BT-54x, BT-64x, BT-74x,
1460# BT-75x, BT-946, BT-948, BT-956, BT-958, SDC3211B, SDC3211F, SDC3222F
1461# esp: NCR53c9x. Only for SBUS hardware right now.
1462# isp: Qlogic ISP 1020, 1040 and 1040B PCI SCSI host adapters,
1463# ISP 1240 Dual Ultra SCSI, ISP 1080 and 1280 (Dual) Ultra2,
1464# ISP 12160 Ultra3 SCSI,
1465# Qlogic ISP 2100 and ISP 2200 1Gb Fibre Channel host adapters.
1466# Qlogic ISP 2300 and ISP 2312 2Gb Fibre Channel host adapters.
1467# Qlogic ISP 2322 and ISP 6322 2Gb Fibre Channel host adapters.
1468# ispfw: Firmware module for Qlogic host adapters
1469# mpt: LSI-Logic MPT/Fusion 53c1020 or 53c1030 Ultra4
1470# or FC9x9 Fibre Channel host adapters.
1471# ncr: NCR 53C810, 53C825 self-contained SCSI host adapters.
1472# sym: Symbios/Logic 53C8XX family of PCI-SCSI I/O processors:
1473# 53C810, 53C810A, 53C815, 53C825, 53C825A, 53C860, 53C875,
1474# 53C876, 53C885, 53C895, 53C895A, 53C896, 53C897, 53C1510D,
1475# 53C1010-33, 53C1010-66.
1476# trm: Tekram DC395U/UW/F DC315U adapters.
1477# wds: WD7000
1478
1479#
1480# Note that the order is important in order for Buslogic ISA/EISA cards to be
1481# probed correctly.
1482#
1483device bt
1484hint.bt.0.at="isa"
1485hint.bt.0.port="0x330"
1486device adv
1487hint.adv.0.at="isa"
1488device adw
1489device aha
1490hint.aha.0.at="isa"
1491device aic
1492hint.aic.0.at="isa"
1493device ahb
1494device ahc
1495device ahd
1496device amd
1497device esp
1498device iscsi_initiator
1499device isp
1500hint.isp.0.disable="1"
1501hint.isp.0.role="3"
1502hint.isp.0.prefer_iomap="1"
1503hint.isp.0.prefer_memmap="1"
1504hint.isp.0.fwload_disable="1"
1505hint.isp.0.ignore_nvram="1"
1506hint.isp.0.fullduplex="1"
1507hint.isp.0.topology="lport"
1508hint.isp.0.topology="nport"
1509hint.isp.0.topology="lport-only"
1510hint.isp.0.topology="nport-only"
1511# we can't get u_int64_t types, nor can we get strings if it's got
1512# a leading 0x, hence this silly dodge.
1513hint.isp.0.portwnn="w50000000aaaa0000"
1514hint.isp.0.nodewnn="w50000000aaaa0001"
1515device ispfw
1516device mpt
1517device ncr
1518device sym
1519device trm
1520device wds
1521hint.wds.0.at="isa"
1522hint.wds.0.port="0x350"
1523hint.wds.0.irq="11"
1524hint.wds.0.drq="6"
1525
1526# The aic7xxx driver will attempt to use memory mapped I/O for all PCI
1527# controllers that have it configured only if this option is set. Unfortunately,
1528# this doesn't work on some motherboards, which prevents it from being the
1529# default.
1530options AHC_ALLOW_MEMIO
1531
1532# Dump the contents of the ahc controller configuration PROM.
1533options AHC_DUMP_EEPROM
1534
1535# Bitmap of units to enable targetmode operations.
1536options AHC_TMODE_ENABLE
1537
1538# Compile in Aic7xxx Debugging code.
1539options AHC_DEBUG
1540
1541# Aic7xxx driver debugging options. See sys/dev/aic7xxx/aic7xxx.h
1542options AHC_DEBUG_OPTS
1543
1544# Print register bitfields in debug output. Adds ~128k to driver
1545# See ahc(4).
1546options AHC_REG_PRETTY_PRINT
1547
1548# Compile in aic79xx debugging code.
1549options AHD_DEBUG
1550
1551# Aic79xx driver debugging options. Adds ~215k to driver. See ahd(4).
1552options AHD_DEBUG_OPTS=0xFFFFFFFF
1553
1554# Print human-readable register definitions when debugging
1555options AHD_REG_PRETTY_PRINT
1556
1557# Bitmap of units to enable targetmode operations.
1558options AHD_TMODE_ENABLE
1559
1560# The adw driver will attempt to use memory mapped I/O for all PCI
1561# controllers that have it configured only if this option is set.
1562options ADW_ALLOW_MEMIO
1563
1564# Options used in dev/iscsi (Software iSCSI stack)
1565#
1566options ISCSI_INITIATOR_DEBUG=9
1567
1568# Options used in dev/isp/ (Qlogic SCSI/FC driver).
1569#
1570# ISP_TARGET_MODE - enable target mode operation
1571#
1572options ISP_TARGET_MODE=1
1573#
1574# ISP_DEFAULT_ROLES - default role
1575# none=0
1576# target=1
1577# initiator=2
1578# both=3 (not supported currently)
1579#
1580# ISP_INTERNAL_TARGET (trivial internal disk target, for testing)
1581#
1582options ISP_DEFAULT_ROLES=2
1583
1584# Options used in dev/sym/ (Symbios SCSI driver).
1585#options SYM_SETUP_LP_PROBE_MAP #-Low Priority Probe Map (bits)
1586 # Allows the ncr to take precedence
1587 # 1 (1<<0) -> 810a, 860
1588 # 2 (1<<1) -> 825a, 875, 885, 895
1589 # 4 (1<<2) -> 895a, 896, 1510d
1590#options SYM_SETUP_SCSI_DIFF #-HVD support for 825a, 875, 885
1591 # disabled:0 (default), enabled:1
1592#options SYM_SETUP_PCI_PARITY #-PCI parity checking
1593 # disabled:0, enabled:1 (default)
1594#options SYM_SETUP_MAX_LUN #-Number of LUNs supported
1595 # default:8, range:[1..64]
1596
1597# The 'dpt' driver provides support for old DPT controllers (http://www.dpt.com/).
1598# These have hardware RAID-{0,1,5} support, and do multi-initiator I/O.
1599# The DPT controllers are commonly re-licensed under other brand-names -
1600# some controllers by Olivetti, Dec, HP, AT&T, SNI, AST, Alphatronic, NEC and
1601# Compaq are actually DPT controllers.
1602#
1603# See src/sys/dev/dpt for debugging and other subtle options.
1604# DPT_MEASURE_PERFORMANCE Enables a set of (semi)invasive metrics. Various
1605# instruments are enabled. The tools in
1606# /usr/sbin/dpt_* assume these to be enabled.
1607# DPT_HANDLE_TIMEOUTS Normally device timeouts are handled by the DPT.
1608# If you want the driver to handle timeouts, enable
1609# this option. If your system is very busy, this
1610# option will create more trouble than solve.
1611# DPT_TIMEOUT_FACTOR Used to compute the excessive amount of time to
1612# wait when timing out with the above option.
1613# DPT_DEBUG_xxxx These are controllable from sys/dev/dpt/dpt.h
1614# DPT_LOST_IRQ When enabled, will try, once per second, to catch
1615# any interrupt that got lost. Seems to help in some
1616# DPT-firmware/Motherboard combinations. Minimal
1617# cost, great benefit.
1618# DPT_RESET_HBA Make "reset" actually reset the controller
1619# instead of fudging it. Only enable this if you
1620# are 100% certain you need it.
1621
1622device dpt
1623
1624# DPT options
1625#!CAM# options DPT_MEASURE_PERFORMANCE
1626#!CAM# options DPT_HANDLE_TIMEOUTS
1627options DPT_TIMEOUT_FACTOR=4
1628options DPT_LOST_IRQ
1629options DPT_RESET_HBA
1630
1631#
1632# Compaq "CISS" RAID controllers (SmartRAID 5* series)
1633# These controllers have a SCSI-like interface, and require the
1634# CAM infrastructure.
1635#
1636device ciss
1637
1638#
1639# Intel Integrated RAID controllers.
1640# This driver was developed and is maintained by Intel. Contacts
1641# at Intel for this driver are
1642# "Kannanthanam, Boji T" <boji.t.kannanthanam@intel.com> and
1643# "Leubner, Achim" <achim.leubner@intel.com>.
1644#
1645device iir
1646
1647#
1648# Mylex AcceleRAID and eXtremeRAID controllers with v6 and later
1649# firmware. These controllers have a SCSI-like interface, and require
1650# the CAM infrastructure.
1651#
1652device mly
1653
1654#
1655# Compaq Smart RAID, Mylex DAC960 and AMI MegaRAID controllers. Only
1656# one entry is needed; the code will find and configure all supported
1657# controllers.
1658#
1659device ida # Compaq Smart RAID
1660device mlx # Mylex DAC960
1661device amr # AMI MegaRAID
1662device amrp # SCSI Passthrough interface (optional, CAM req.)
1663device mfi # LSI MegaRAID SAS
1664device mfip # LSI MegaRAID SAS passthrough, requires CAM
1665options MFI_DEBUG
1666
1667#
1668# 3ware ATA RAID
1669#
1670device twe # 3ware ATA RAID
1671
1672#
1673# Serial ATA host controllers:
1674#
1675# ahci: Advanced Host Controller Interface (AHCI) compatible
1676# mvs: Marvell 88SX50XX/88SX60XX/88SX70XX/SoC controllers
1677# siis: SiliconImage SiI3124/SiI3132/SiI3531 controllers
1678#
1679# These drivers are part of cam(4) subsystem. They supersede less featured
1680# ata(4) subsystem drivers, supporting same hardware.
1681
1682device ahci
1683device mvs
1684device siis
1685
1686#
1687# The 'ATA' driver supports all ATA and ATAPI devices, including PC Card
1688# devices. You only need one "device ata" for it to find all
1689# PCI and PC Card ATA/ATAPI devices on modern machines.
1690# Alternatively, individual bus and chipset drivers may be chosen by using
1691# the 'atacore' driver then selecting the drivers on a per vendor basis.
1692# For example to build a system which only supports a VIA chipset,
1693# omit 'ata' and include the 'atacore', 'atapci' and 'atavia' drivers.
1694device ata
1695device atadisk # ATA disk drives
1696device ataraid # ATA RAID drives
1697device atapicd # ATAPI CDROM drives
1698device atapifd # ATAPI floppy drives
1699device atapist # ATAPI tape drives
1700device atapicam # emulate ATAPI devices as SCSI ditto via CAM
1701 # needs CAM to be present (scbus & pass)
1702
1703# Modular ATA
1704#device atacore # Core ATA functionality
1705#device atacard # CARDBUS support
1706#device atabus # PC98 cbus support
1707#device ataisa # ISA bus support
1708#device atapci # PCI bus support; only generic chipset support
1709
1710# PCI ATA chipsets
1711#device ataahci # AHCI SATA
1712#device ataacard # ACARD
1713#device ataacerlabs # Acer Labs Inc. (ALI)
1714#device ataadaptec # Adaptec
1715#device ataamd # American Micro Devices (AMD)
1716#device ataati # ATI
1717#device atacenatek # Cenatek
1718#device atacypress # Cypress
1719#device atacyrix # Cyrix
1720#device atahighpoint # HighPoint
1721#device ataintel # Intel
1722#device ataite # Integrated Technology Inc. (ITE)
1723#device atajmicron # JMicron
1724#device atamarvell # Marvell
1725#device atamicron # Micron
1726#device atanational # National
1727#device atanetcell # NetCell
1728#device atanvidia # nVidia
1729#device atapromise # Promise
1730#device ataserverworks # ServerWorks
1731#device atasiliconimage # Silicon Image Inc. (SiI) (formerly CMD)
1732#device atasis # Silicon Integrated Systems Corp.(SiS)
1733#device atavia # VIA Technologies Inc.
1734
1735#
1736# For older non-PCI, non-PnPBIOS systems, these are the hints lines to add:
1737hint.ata.0.at="isa"
1738hint.ata.0.port="0x1f0"
1739hint.ata.0.irq="14"
1740hint.ata.1.at="isa"
1741hint.ata.1.port="0x170"
1742hint.ata.1.irq="15"
1743
1744#
1745# The following options are valid on the ATA driver:
1746#
1747# ATA_STATIC_ID: controller numbering is static ie depends on location
1748# else the device numbers are dynamically allocated.
1749# ATA_REQUEST_TIMEOUT: the number of seconds to wait for an ATA request
1750# before timing out.
1751# ATA_CAM: Turn ata(4) subsystem controller drivers into cam(4)
1752# interface modules. This deprecates all ata(4)
1753# peripheral device drivers (atadisk, ataraid, atapicd,
1754# atapifd, atapist, atapicam) and all user-level APIs.
1755# cam(4) drivers and APIs will be connected instead.
1756
1757options ATA_STATIC_ID
1758#options ATA_REQUEST_TIMEOUT=10
1759#options ATA_CAM
1760
1761#
1762# Standard floppy disk controllers and floppy tapes, supports
1763# the Y-E DATA External FDD (PC Card)
1764#
1765device fdc
1766hint.fdc.0.at="isa"
1767hint.fdc.0.port="0x3F0"
1768hint.fdc.0.irq="6"
1769hint.fdc.0.drq="2"
1770#
1771# FDC_DEBUG enables floppy debugging. Since the debug output is huge, you
1772# gotta turn it actually on by setting the variable fd_debug with DDB,
1773# however.
1774options FDC_DEBUG
1775#
1776# Activate this line if you happen to have an Insight floppy tape.
1777# Probing them proved to be dangerous for people with floppy disks only,
1778# so it's "hidden" behind a flag:
1779#hint.fdc.0.flags="1"
1780
1781# Specify floppy devices
1782hint.fd.0.at="fdc0"
1783hint.fd.0.drive="0"
1784hint.fd.1.at="fdc0"
1785hint.fd.1.drive="1"
1786
1787#
1788# uart: newbusified driver for serial interfaces. It consolidates the sio(4),
1789# sab(4) and zs(4) drivers.
1790#
1791device uart
1792
1793# Options for uart(4)
1794options UART_PPS_ON_CTS # Do time pulse capturing using CTS
1795 # instead of DCD.
1796
1797# The following hint should only be used for pure ISA devices. It is not
1798# needed otherwise. Use of hints is strongly discouraged.
1799hint.uart.0.at="isa"
1800
1801# The following 3 hints are used when the UART is a system device (i.e., a
1802# console or debug port), but only on platforms that don't have any other
1803# means to pass the information to the kernel. The unit number of the hint
1804# is only used to bundle the hints together. There is no relation to the
1805# unit number of the probed UART.
1806hint.uart.0.port="0x3f8"
1807hint.uart.0.flags="0x10"
1808hint.uart.0.baud="115200"
1809
1810# `flags' for serial drivers that support consoles like sio(4) and uart(4):
1811# 0x10 enable console support for this unit. Other console flags
1812# (if applicable) are ignored unless this is set. Enabling
1813# console support does not make the unit the preferred console.
1814# Boot with -h or set boot_serial=YES in the loader. For sio(4)
1815# specifically, the 0x20 flag can also be set (see above).
1816# Currently, at most one unit can have console support; the
1817# first one (in config file order) with this flag set is
1818# preferred. Setting this flag for sio0 gives the old behaviour.
1819# 0x80 use this port for serial line gdb support in ddb. Also known
1820# as debug port.
1821#
1822
1823# Options for serial drivers that support consoles:
1824options BREAK_TO_DEBUGGER # A BREAK on a serial console goes to
1825 # ddb, if available.
1826
1827# Solaris implements a new BREAK which is initiated by a character
1828# sequence CR ~ ^b which is similar to a familiar pattern used on
1829# Sun servers by the Remote Console. There are FreeBSD extensions:
1830# CR ~ ^p requests force panic and CR ~ ^r requests a clean reboot.
1831options ALT_BREAK_TO_DEBUGGER
1832
1833# Serial Communications Controller
1834# Supports the Siemens SAB 82532 and Zilog Z8530 multi-channel
1835# communications controllers.
1836device scc
1837
1838# PCI Universal Communications driver
1839# Supports various multi port PCI I/O cards.
1840device puc
1841
1842#
1843# Network interfaces:
1844#
1845# MII bus support is required for many PCI Ethernet NICs,
1846# namely those which use MII-compliant transceivers or implement
1847# transceiver control interfaces that operate like an MII. Adding
1848# "device miibus" to the kernel config pulls in support for
1849# the generic miibus API and all of the PHY drivers, including a
1850# generic one for PHYs that aren't specifically handled by an
1851# individual driver. Support for specific PHYs may be built by adding
1852# "device mii" then adding the appropriate PHY driver.
1853device miibus # MII support including all PHYs
1854device mii # Minimal MII support
1855
1856device acphy # Altima Communications AC101
1857device amphy # AMD AM79c873 / Davicom DM910{1,2}
1858device atphy # Attansic/Atheros F1
1859device axphy # Asix Semiconductor AX88x9x
1860device bmtphy # Broadcom BCM5201/BCM5202 and 3Com 3c905C
1861device brgphy # Broadcom BCM54xx/57xx 1000baseTX
1862device ciphy # Cicada/Vitesse CS/VSC8xxx
1863device e1000phy # Marvell 88E1000 1000/100/10-BT
1864device exphy # 3Com internal PHY
1865device gentbi # Generic 10-bit 1000BASE-{LX,SX} fiber ifaces
1866device icsphy # ICS ICS1889-1893
1867device inphy # Intel 82553/82555
1868device ip1000phy # IC Plus IP1000A/IP1001
1869device jmphy # JMicron JMP211/JMP202
1870device lxtphy # Level One LXT-970
1871device mlphy # Micro Linear 6692
1872device nsgphy # NatSemi DP8361/DP83865/DP83891
1873device nsphy # NatSemi DP83840A
1874device nsphyter # NatSemi DP83843/DP83815
1875device pnaphy # HomePNA
1876device qsphy # Quality Semiconductor QS6612
1877device rdcphy # RDC Semiconductor R6040
1878device rgephy # RealTek 8169S/8110S/8211B/8211C
1879device rlphy # RealTek 8139
1880device rlswitch # RealTek 8305
1881device ruephy # RealTek RTL8150
1882device smcphy # SMSC LAN91C111
1883device tdkphy # TDK 89Q2120
1884device tlphy # Texas Instruments ThunderLAN
1885device truephy # LSI TruePHY
1886device xmphy # XaQti XMAC II
1887
1888# an: Aironet 4500/4800 802.11 wireless adapters. Supports the PCMCIA,
1889# PCI and ISA varieties.
1890# ae: Support for gigabit ethernet adapters based on the Attansic/Atheros
1891# L2 PCI-Express FastEthernet controllers.
1892# age: Support for gigabit ethernet adapters based on the Attansic/Atheros
1893# L1 PCI express gigabit ethernet controllers.
1894# alc: Support for Atheros AR8131/AR8132 PCIe ethernet controllers.
1895# ale: Support for Atheros AR8121/AR8113/AR8114 PCIe ethernet controllers.
1896# ath: Atheros a/b/g WiFi adapters (requires ath_hal and wlan)
1897# bce: Broadcom NetXtreme II (BCM5706/BCM5708) PCI/PCIe Gigabit Ethernet
1898# adapters.
1899# bfe: Broadcom BCM4401 Ethernet adapter.
1900# bge: Support for gigabit ethernet adapters based on the Broadcom
1901# BCM570x family of controllers, including the 3Com 3c996-T,
1902# the Netgear GA302T, the SysKonnect SK-9D21 and SK-9D41, and
1903# the embedded gigE NICs on Dell PowerEdge 2550 servers.
1904# bxe: Broadcom NetXtreme II (BCM57710/57711/57711E) PCIe 10b Ethernet
1905# adapters.
1906# bwi: Broadcom BCM430* and BCM431* family of wireless adapters.
1907# bwn: Broadcom BCM43xx family of wireless adapters.
1908# cas: Sun Cassini/Cassini+ and National Semiconductor DP83065 Saturn
1909# cm: Arcnet SMC COM90c26 / SMC COM90c56
1910# (and SMC COM90c66 in '56 compatibility mode) adapters.
1911# cxgbe: Support for PCI express 10Gb/1Gb adapters based on the Chelsio T4
1912# (Terminator 4) ASIC.
1913# dc: Support for PCI fast ethernet adapters based on the DEC/Intel 21143
1914# and various workalikes including:
1915# the ADMtek AL981 Comet and AN985 Centaur, the ASIX Electronics
1916# AX88140A and AX88141, the Davicom DM9100 and DM9102, the Lite-On
1917# 82c168 and 82c169 PNIC, the Lite-On/Macronix LC82C115 PNIC II
1918# and the Macronix 98713/98713A/98715/98715A/98725 PMAC. This driver
1919# replaces the old al, ax, dm, pn and mx drivers. List of brands:
1920# Digital DE500-BA, Kingston KNE100TX, D-Link DFE-570TX, SOHOware SFA110,
1921# SVEC PN102-TX, CNet Pro110B, 120A, and 120B, Compex RL100-TX,
1922# LinkSys LNE100TX, LNE100TX V2.0, Jaton XpressNet, Alfa Inc GFC2204,
1923# KNE110TX.
1924# de: Digital Equipment DC21040
1925# em: Intel Pro/1000 Gigabit Ethernet 82542, 82543, 82544 based adapters.
1926# igb: Intel Pro/1000 PCI Express Gigabit Ethernet: 82575 and later adapters.
1927# ep: 3Com 3C509, 3C529, 3C556, 3C562D, 3C563D, 3C572, 3C574X, 3C579, 3C589
1928# and PC Card devices using these chipsets.
1929# ex: Intel EtherExpress Pro/10 and other i82595-based adapters,
1930# Olicom Ethernet PC Card devices.
1931# fe: Fujitsu MB86960A/MB86965A Ethernet
1932# fea: DEC DEFEA EISA FDDI adapter
1933# fpa: Support for the Digital DEFPA PCI FDDI. `device fddi' is also needed.
1934# fxp: Intel EtherExpress Pro/100B
1935# (hint of prefer_iomap can be done to prefer I/O instead of Mem mapping)
1936# gem: Apple GMAC/Sun ERI/Sun GEM
1937# hme: Sun HME (Happy Meal Ethernet)
1938# jme: JMicron JMC260 Fast Ethernet/JMC250 Gigabit Ethernet based adapters.
1939# le: AMD Am7900 LANCE and Am79C9xx PCnet
1940# lge: Support for PCI gigabit ethernet adapters based on the Level 1
1941# LXT1001 NetCellerator chipset. This includes the D-Link DGE-500SX,
1942# SMC TigerCard 1000 (SMC9462SX), and some Addtron cards.
1943# msk: Support for gigabit ethernet adapters based on the Marvell/SysKonnect
1944# Yukon II Gigabit controllers, including 88E8021, 88E8022, 88E8061,
1945# 88E8062, 88E8035, 88E8036, 88E8038, 88E8050, 88E8052, 88E8053,
1946# 88E8055, 88E8056 and D-Link 560T/550SX.
1947# lmc: Support for the LMC/SBE wide-area network interface cards.
1948# my: Myson Fast Ethernet (MTD80X, MTD89X)
1949# nge: Support for PCI gigabit ethernet adapters based on the National
1950# Semiconductor DP83820 and DP83821 chipset. This includes the
1951# SMC EZ Card 1000 (SMC9462TX), D-Link DGE-500T, Asante FriendlyNet
1952# GigaNIX 1000TA and 1000TPC, the Addtron AEG320T, the Surecom
1953# EP-320G-TX and the Netgear GA622T.
1954# pcn: Support for PCI fast ethernet adapters based on the AMD Am79c97x
1955# PCnet-FAST, PCnet-FAST+, PCnet-FAST III, PCnet-PRO and PCnet-Home
1956# chipsets. These can also be handled by the le(4) driver if the
1957# pcn(4) driver is left out of the kernel. The le(4) driver does not
1958# support the additional features like the MII bus and burst mode of
1959# the PCnet-FAST and greater chipsets though.
1960# ral: Ralink Technology IEEE 802.11 wireless adapter
1961# re: RealTek 8139C+/8169/816xS/811xS/8101E PCI/PCIe Ethernet adapter
1962# rl: Support for PCI fast ethernet adapters based on the RealTek 8129/8139
1963# chipset. Note that the RealTek driver defaults to using programmed
1964# I/O to do register accesses because memory mapped mode seems to cause
1965# severe lockups on SMP hardware. This driver also supports the
1966# Accton EN1207D `Cheetah' adapter, which uses a chip called
1967# the MPX 5030/5038, which is either a RealTek in disguise or a
1968# RealTek workalike. Note that the D-Link DFE-530TX+ uses the RealTek
1969# chipset and is supported by this driver, not the 'vr' driver.
1970# sf: Support for Adaptec Duralink PCI fast ethernet adapters based on the
1971# Adaptec AIC-6915 "starfire" controller.
1972# This includes dual and quad port cards, as well as one 100baseFX card.
1973# Most of these are 64-bit PCI devices, except for one single port
1974# card which is 32-bit.
1975# sge: Silicon Integrated Systems SiS190/191 Fast/Gigabit Ethernet adapter
1976# sis: Support for NICs based on the Silicon Integrated Systems SiS 900,
1977# SiS 7016 and NS DP83815 PCI fast ethernet controller chips.
1978# sk: Support for the SysKonnect SK-984x series PCI gigabit ethernet NICs.
1979# This includes the SK-9841 and SK-9842 single port cards (single mode
1980# and multimode fiber) and the SK-9843 and SK-9844 dual port cards
1981# (also single mode and multimode).
1982# The driver will autodetect the number of ports on the card and
1983# attach each one as a separate network interface.
1984# sn: Support for ISA and PC Card Ethernet devices using the
1985# SMC91C90/92/94/95 chips.
1986# ste: Sundance Technologies ST201 PCI fast ethernet controller, includes
1987# the D-Link DFE-550TX.
1988# stge: Support for gigabit ethernet adapters based on the Sundance/Tamarack
1989# TC9021 family of controllers, including the Sundance ST2021/ST2023,
1990# the Sundance/Tamarack TC9021, the D-Link DL-4000 and ASUS NX1101.
1991# ti: Support for PCI gigabit ethernet NICs based on the Alteon Networks
1992# Tigon 1 and Tigon 2 chipsets. This includes the Alteon AceNIC, the
1993# 3Com 3c985, the Netgear GA620 and various others. Note that you will
1994# probably want to bump up kern.ipc.nmbclusters a lot to use this driver.
1995# tl: Support for the Texas Instruments TNETE100 series 'ThunderLAN'
1996# cards and integrated ethernet controllers. This includes several
1997# Compaq Netelligent 10/100 cards and the built-in ethernet controllers
1998# in several Compaq Prosignia, Proliant and Deskpro systems. It also
1999# supports several Olicom 10Mbps and 10/100 boards.
2000# tx: SMC 9432 TX, BTX and FTX cards. (SMC EtherPower II series)
2001# txp: Support for 3Com 3cR990 cards with the "Typhoon" chipset
2002# vr: Support for various fast ethernet adapters based on the VIA
2003# Technologies VT3043 `Rhine I' and VT86C100A `Rhine II' chips,
2004# including the D-Link DFE520TX and D-Link DFE530TX (see 'rl' for
2005# DFE530TX+), the Hawking Technologies PN102TX, and the AOpen/Acer ALN-320.
2006# vte: DM&P Vortex86 RDC R6040 Fast Ethernet
2007# vx: 3Com 3C590 and 3C595
2008# wb: Support for fast ethernet adapters based on the Winbond W89C840F chip.
2009# Note: this is not the same as the Winbond W89C940F, which is a
2010# NE2000 clone.
2011# wi: Lucent WaveLAN/IEEE 802.11 PCMCIA adapters. Note: this supports both
2012# the PCMCIA and ISA cards: the ISA card is really a PCMCIA to ISA
2013# bridge with a PCMCIA adapter plugged into it.
2014# xe: Xircom/Intel EtherExpress Pro100/16 PC Card ethernet controller,
2015# Accton Fast EtherCard-16, Compaq Netelligent 10/100 PC Card,
2016# Toshiba 10/100 Ethernet PC Card, Xircom 16-bit Ethernet + Modem 56
2017# xl: Support for the 3Com 3c900, 3c905, 3c905B and 3c905C (Fast)
2018# Etherlink XL cards and integrated controllers. This includes the
2019# integrated 3c905B-TX chips in certain Dell Optiplex and Dell
2020# Precision desktop machines and the integrated 3c905-TX chips
2021# in Dell Latitude laptop docking stations.
2022# Also supported: 3Com 3c980(C)-TX, 3Com 3cSOHO100-TX, 3Com 3c450-TX
2023
2024# Order for ISA/EISA devices is important here
2025
2026device cm
2027hint.cm.0.at="isa"
2028hint.cm.0.port="0x2e0"
2029hint.cm.0.irq="9"
2030hint.cm.0.maddr="0xdc000"
2031device ep
2032device ex
2033device fe
2034hint.fe.0.at="isa"
2035hint.fe.0.port="0x300"
2036device fea
2037device sn
2038hint.sn.0.at="isa"
2039hint.sn.0.port="0x300"
2040hint.sn.0.irq="10"
2041device an
2042device wi
2043device xe
2044
2045# PCI Ethernet NICs that use the common MII bus controller code.
2046device ae # Attansic/Atheros L2 FastEthernet
2047device age # Attansic/Atheros L1 Gigabit Ethernet
2048device alc # Atheros AR8131/AR8132 Ethernet
2049device ale # Atheros AR8121/AR8113/AR8114 Ethernet
2050device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet
2051device bfe # Broadcom BCM440x 10/100 Ethernet
2052device bge # Broadcom BCM570xx Gigabit Ethernet
2053device cas # Sun Cassini/Cassini+ and NS DP83065 Saturn
2054device cxgb # Chelsio T3 10 Gigabit Ethernet
2055device cxgb_t3fw # Chelsio T3 10 Gigabit Ethernet firmware
2056device dc # DEC/Intel 21143 and various workalikes
2057device et # Agere ET1310 10/100/Gigabit Ethernet
2058device fxp # Intel EtherExpress PRO/100B (82557, 82558)
2059hint.fxp.0.prefer_iomap="0"
2060device gem # Apple GMAC/Sun ERI/Sun GEM
2061device hme # Sun HME (Happy Meal Ethernet)
2062device jme # JMicron JMC250 Gigabit/JMC260 Fast Ethernet
2063device lge # Level 1 LXT1001 gigabit Ethernet
2064device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
2065device my # Myson Fast Ethernet (MTD80X, MTD89X)
2066device nge # NatSemi DP83820 gigabit Ethernet
2067device re # RealTek 8139C+/8169/8169S/8110S
2068device rl # RealTek 8129/8139
2069device pcn # AMD Am79C97x PCI 10/100 NICs
2070device sf # Adaptec AIC-6915 (``Starfire'')
2071device sge # Silicon Integrated Systems SiS190/191
2072device sis # Silicon Integrated Systems SiS 900/SiS 7016
2073device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
2074device ste # Sundance ST201 (D-Link DFE-550TX)
2075device stge # Sundance/Tamarack TC9021 gigabit Ethernet
2076device tl # Texas Instruments ThunderLAN
2077device tx # SMC EtherPower II (83c170 ``EPIC'')
2078device vr # VIA Rhine, Rhine II
2079device vte # DM&P Vortex86 RDC R6040 Fast Ethernet
2080device wb # Winbond W89C840F
2081device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
2082
2083# PCI Ethernet NICs.
2084device bxe # Broadcom BCM57710/BCM57711/BCM57711E 10Gb Ethernet
2085device cxgbe # Chelsio T4 10GbE PCIe adapter
2086device de # DEC/Intel DC21x4x (``Tulip'')
2087device em # Intel Pro/1000 Gigabit Ethernet
2088device igb # Intel Pro/1000 PCIE Gigabit Ethernet
2089device ixgb # Intel Pro/10Gbe PCI-X Ethernet
2090device ixgbe # Intel Pro/10Gbe PCIE Ethernet
2091device le # AMD Am7900 LANCE and Am79C9xx PCnet
2092device mxge # Myricom Myri-10G 10GbE NIC
2093device nxge # Neterion Xframe 10GbE Server/Storage Adapter
2094device ti # Alteon Networks Tigon I/II gigabit Ethernet
2095device txp # 3Com 3cR990 (``Typhoon'')
2096device vx # 3Com 3c590, 3c595 (``Vortex'')
2097
2098# PCI FDDI NICs.
2099device fpa
2100
2101# PCI WAN adapters.
2102device lmc
2103
2104# PCI IEEE 802.11 Wireless NICs
2105device ath # Atheros pci/cardbus NIC's
2106device ath_hal # pci/cardbus chip support
2107#device ath_ar5210 # AR5210 chips
2108#device ath_ar5211 # AR5211 chips
2109#device ath_ar5212 # AR5212 chips
2110#device ath_rf2413
2111#device ath_rf2417
2112#device ath_rf2425
2113#device ath_rf5111
2114#device ath_rf5112
2115#device ath_rf5413
2116#device ath_ar5416 # AR5416 chips
2117options AH_SUPPORT_AR5416 # enable AR5416 tx/rx descriptors
2118# All of the AR5212 parts have a problem when paired with the AR71xx
2119# CPUS. These parts have a bug that triggers a fatal bus error on the AR71xx
2120# only. Details of the exact nature of the bug are sketchy, but some can be
2121# found at https://forum.openwrt.org/viewtopic.php?pid=70060 on pages 4, 5 and
2122# 6. This option enables this workaround. There is a performance penalty
2123# for this work around, but without it things don't work at all. The DMA
2124# from the card usually bursts 128 bytes, but on the affected CPUs, only
2125# 4 are safe.
2126options AH_RXCFG_SDMAMW_4BYTES
2127#device ath_ar9160 # AR9160 chips
2128#device ath_ar9280 # AR9280 chips
2129#device ath_ar9285 # AR9285 chips
2130device ath_rate_sample # SampleRate tx rate control for ath
2131device bwi # Broadcom BCM430* BCM431*
2132device bwn # Broadcom BCM43xx
2133device ral # Ralink Technology RT2500 wireless NICs.
2134
2135# Use "private" jumbo buffers allocated exclusively for the ti(4) driver.
2136# This option is incompatible with the TI_JUMBO_HDRSPLIT option below.
2137#options TI_PRIVATE_JUMBOS
2138# Turn on the header splitting option for the ti(4) driver firmware. This
2139# only works for Tigon II chips, and has no effect for Tigon I chips.
2140options TI_JUMBO_HDRSPLIT
2141
2142#
2143# Use header splitting feature on bce(4) adapters.
2144# This may help to reduce the amount of jumbo-sized memory buffers used.
2145#
2146options BCE_JUMBO_HDRSPLIT
2147
2148# These two options allow manipulating the mbuf cluster size and mbuf size,
2149# respectively. Be very careful with NIC driver modules when changing
2150# these from their default values, because that can potentially cause a
2151# mismatch between the mbuf size assumed by the kernel and the mbuf size
2152# assumed by a module. The only driver that currently has the ability to
2153# detect a mismatch is ti(4).
2154options MCLSHIFT=12 # mbuf cluster shift in bits, 12 == 4KB
2155options MSIZE=512 # mbuf size in bytes
2156
2157#
2158# ATM related options (Cranor version)
2159# (note: this driver cannot be used with the HARP ATM stack)
2160#
2161# The `en' device provides support for Efficient Networks (ENI)
2162# ENI-155 PCI midway cards, and the Adaptec 155Mbps PCI ATM cards (ANA-59x0).
2163#
2164# The `hatm' device provides support for Fore/Marconi HE155 and HE622
2165# ATM PCI cards.
2166#
2167# The `fatm' device provides support for Fore PCA200E ATM PCI cards.
2168#
2169# The `patm' device provides support for IDT77252 based cards like
2170# ProSum's ProATM-155 and ProATM-25 and IDT's evaluation boards.
2171#
2172# atm device provides generic atm functions and is required for
2173# atm devices.
2174# NATM enables the netnatm protocol family that can be used to
2175# bypass TCP/IP.
2176#
2177# utopia provides the access to the ATM PHY chips and is required for en,
2178# hatm and fatm.
2179#
2180# the current driver supports only PVC operations (no atm-arp, no multicast).
2181# for more details, please read the original documents at
2182# http://www.ccrc.wustl.edu/pub/chuck/tech/bsdatm/bsdatm.html
2183#
2184device atm
2185device en
2186device fatm #Fore PCA200E
2187device hatm #Fore/Marconi HE155/622
2188device patm #IDT77252 cards (ProATM and IDT)
2189device utopia #ATM PHY driver
2190options NATM #native ATM
2191
2192options LIBMBPOOL #needed by patm, iatm
2193
2194#
2195# Sound drivers
2196#
2197# sound: The generic sound driver.
2198#
2199
2200device sound
2201
2202#
2203# snd_*: Device-specific drivers.
2204#
2205# The flags of the device tell the device a bit more info about the
2206# device that normally is obtained through the PnP interface.
2207# bit 2..0 secondary DMA channel;
2208# bit 4 set if the board uses two dma channels;
2209# bit 15..8 board type, overrides autodetection; leave it
2210# zero if don't know what to put in (and you don't,
2211# since this is unsupported at the moment...).
2212#
2213# snd_ad1816: Analog Devices AD1816 ISA PnP/non-PnP.
2214# snd_als4000: Avance Logic ALS4000 PCI.
2215# snd_atiixp: ATI IXP 200/300/400 PCI.
2216# snd_audiocs: Crystal Semiconductor CS4231 SBus/EBus. Only
2217# for sparc64.
2218# snd_cmi: CMedia CMI8338/CMI8738 PCI.
2219# snd_cs4281: Crystal Semiconductor CS4281 PCI.
2220# snd_csa: Crystal Semiconductor CS461x/428x PCI. (except
2221# 4281)
2222# snd_ds1: Yamaha DS-1 PCI.
2223# snd_emu10k1: Creative EMU10K1 PCI and EMU10K2 (Audigy) PCI.
2224# snd_emu10kx: Creative SoundBlaster Live! and Audigy
2225# snd_envy24: VIA Envy24 and compatible, needs snd_spicds.
2226# snd_envy24ht: VIA Envy24HT and compatible, needs snd_spicds.
2227# snd_es137x: Ensoniq AudioPCI ES137x PCI.
2228# snd_ess: Ensoniq ESS ISA PnP/non-PnP, to be used in
2229# conjunction with snd_sbc.
2230# snd_fm801: Forte Media FM801 PCI.
2231# snd_gusc: Gravis UltraSound ISA PnP/non-PnP.
2232# snd_hda: Intel High Definition Audio (Controller) and
2233# compatible.
2234# snd_ich: Intel ICH AC'97 and some more audio controllers
2235# embedded in a chipset, for example nVidia
2236# nForce controllers.
2237# snd_maestro: ESS Technology Maestro-1/2x PCI.
2238# snd_maestro3: ESS Technology Maestro-3/Allegro PCI.
2239# snd_mss: Microsoft Sound System ISA PnP/non-PnP.
2240# snd_neomagic: Neomagic 256 AV/ZX PCI.
2241# snd_sb16: Creative SoundBlaster16, to be used in
2242# conjunction with snd_sbc.
2243# snd_sb8: Creative SoundBlaster (pre-16), to be used in
2244# conjunction with snd_sbc.
2245# snd_sbc: Creative SoundBlaster ISA PnP/non-PnP.
2246# Supports ESS and Avance ISA chips as well.
2247# snd_spicds: SPI codec driver, needed by Envy24/Envy24HT drivers.
2248# snd_solo: ESS Solo-1x PCI.
2249# snd_t4dwave: Trident 4DWave DX/NX PCI, Sis 7018 PCI and Acer Labs
2250# M5451 PCI.
2251# snd_via8233: VIA VT8233x PCI.
2252# snd_via82c686: VIA VT82C686A PCI.
2253# snd_vibes: S3 Sonicvibes PCI.
2254# snd_uaudio: USB audio.
2255
2256device snd_ad1816
2257device snd_als4000
2258device snd_atiixp
2259#device snd_audiocs
2260device snd_cmi
2261device snd_cs4281
2262device snd_csa
2263device snd_ds1
2264device snd_emu10k1
2265device snd_emu10kx
2266device snd_envy24
2267device snd_envy24ht
2268device snd_es137x
2269device snd_ess
2270device snd_fm801
2271device snd_gusc
2272device snd_hda
2273device snd_ich
2274device snd_maestro
2275device snd_maestro3
2276device snd_mss
2277device snd_neomagic
2278device snd_sb16
2279device snd_sb8
2280device snd_sbc
2281device snd_solo
2282device snd_spicds
2283device snd_t4dwave
2284device snd_via8233
2285device snd_via82c686
2286device snd_vibes
2287device snd_uaudio
2288
2289# For non-PnP sound cards:
2290hint.pcm.0.at="isa"
2291hint.pcm.0.irq="10"
2292hint.pcm.0.drq="1"
2293hint.pcm.0.flags="0x0"
2294hint.sbc.0.at="isa"
2295hint.sbc.0.port="0x220"
2296hint.sbc.0.irq="5"
2297hint.sbc.0.drq="1"
2298hint.sbc.0.flags="0x15"
2299hint.gusc.0.at="isa"
2300hint.gusc.0.port="0x220"
2301hint.gusc.0.irq="5"
2302hint.gusc.0.drq="1"
2303hint.gusc.0.flags="0x13"
2304
2305#
2306# Following options are intended for debugging/testing purposes:
2307#
2308# SND_DEBUG Enable extra debugging code that includes
2309# sanity checking and possible increase of
2310# verbosity.
2311#
2312# SND_DIAGNOSTIC Simmilar in a spirit of INVARIANTS/DIAGNOSTIC,
2313# zero tolerance against inconsistencies.
2314#
2315# SND_FEEDER_MULTIFORMAT By default, only 16/32 bit feeders are compiled
2316# in. This options enable most feeder converters
2317# except for 8bit. WARNING: May bloat the kernel.
2318#
2319# SND_FEEDER_FULL_MULTIFORMAT Ditto, but includes 8bit feeders as well.
2320#
2321# SND_FEEDER_RATE_HP (feeder_rate) High precision 64bit arithmetic
2322# as much as possible (the default trying to
2323# avoid it). Possible slowdown.
2324#
2325# SND_PCM_64 (Only applicable for i386/32bit arch)
2326# Process 32bit samples through 64bit
2327# integer/arithmetic. Slight increase of dynamic
2328# range at a cost of possible slowdown.
2329#
2330# SND_OLDSTEREO Only 2 channels are allowed, effectively
2331# disabling multichannel processing.
2332#
2333options SND_DEBUG
2334options SND_DIAGNOSTIC
2335options SND_FEEDER_MULTIFORMAT
2336options SND_FEEDER_FULL_MULTIFORMAT
2337options SND_FEEDER_RATE_HP
2338options SND_PCM_64
2339options SND_OLDSTEREO
2340
2341#
2342# IEEE-488 hardware:
2343# pcii: PCIIA cards (uPD7210 based isa cards)
2344# tnt4882: National Instruments PCI-GPIB card.
2345
2346device pcii
2347hint.pcii.0.at="isa"
2348hint.pcii.0.port="0x2e1"
2349hint.pcii.0.irq="5"
2350hint.pcii.0.drq="1"
2351
2352device tnt4882
2353
2354#
2355# Miscellaneous hardware:
2356#
2357# scd: Sony CD-ROM using proprietary (non-ATAPI) interface
2358# mcd: Mitsumi CD-ROM using proprietary (non-ATAPI) interface
2359# bktr: Brooktree bt848/848a/849a/878/879 video capture and TV Tuner board
2360# joy: joystick (including IO DATA PCJOY PC Card joystick)
2361# cmx: OmniKey CardMan 4040 pccard smartcard reader
2362
2363# Mitsumi CD-ROM
2364device mcd
2365hint.mcd.0.at="isa"
2366hint.mcd.0.port="0x300"
2367# for the Sony CDU31/33A CDROM
2368device scd
2369hint.scd.0.at="isa"
2370hint.scd.0.port="0x230"
2371device joy # PnP aware, hints for non-PnP only
2372hint.joy.0.at="isa"
2373hint.joy.0.port="0x201"
2374device cmx
2375
2376#
2377# The 'bktr' device is a PCI video capture device using the Brooktree
2378# bt848/bt848a/bt849a/bt878/bt879 chipset. When used with a TV Tuner it forms a
2379# TV card, e.g. Miro PC/TV, Hauppauge WinCast/TV WinTV, VideoLogic Captivator,
2380# Intel Smart Video III, AverMedia, IMS Turbo, FlyVideo.
2381#
2382# options OVERRIDE_CARD=xxx
2383# options OVERRIDE_TUNER=xxx
2384# options OVERRIDE_MSP=1
2385# options OVERRIDE_DBX=1
2386# These options can be used to override the auto detection
2387# The current values for xxx are found in src/sys/dev/bktr/bktr_card.h
2388# Using sysctl(8) run-time overrides on a per-card basis can be made
2389#
2390# options BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_PAL
2391# or
2392# options BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_NTSC
2393# Specifies the default video capture mode.
2394# This is required for Dual Crystal (28&35Mhz) boards where PAL is used
2395# to prevent hangs during initialisation, e.g. VideoLogic Captivator PCI.
2396#
2397# options BKTR_USE_PLL
2398# This is required for PAL or SECAM boards with a 28Mhz crystal and no 35Mhz
2399# crystal, e.g. some new Bt878 cards.
2400#
2401# options BKTR_GPIO_ACCESS
2402# This enables IOCTLs which give user level access to the GPIO port.
2403#
2404# options BKTR_NO_MSP_RESET
2405# Prevents the MSP34xx reset. Good if you initialise the MSP in another OS first
2406#
2407# options BKTR_430_FX_MODE
2408# Switch Bt878/879 cards into Intel 430FX chipset compatibility mode.
2409#
2410# options BKTR_SIS_VIA_MODE
2411# Switch Bt878/879 cards into SIS/VIA chipset compatibility mode which is
2412# needed for some old SiS and VIA chipset motherboards.
2413# This also allows Bt878/879 chips to work on old OPTi (<1997) chipset
2414# motherboards and motherboards with bad or incomplete PCI 2.1 support.
2415# As a rough guess, old = before 1998
2416#
2417# options BKTR_NEW_MSP34XX_DRIVER
2418# Use new, more complete initialization scheme for the msp34* soundchip.
2419# Should fix stereo autodetection if the old driver does only output
2420# mono sound.
2421
2422#
2423# options BKTR_USE_FREEBSD_SMBUS
2424# Compile with FreeBSD SMBus implementation
2425#
2426# Brooktree driver has been ported to the new I2C framework. Thus,
2427# you'll need to have the following 3 lines in the kernel config.
2428# device smbus
2429# device iicbus
2430# device iicbb
2431# device iicsmb
2432# The iic and smb devices are only needed if you want to control other
2433# I2C slaves connected to the external connector of some cards.
2434#
2435device bktr
2436
2437#
2438# PC Card/PCMCIA and Cardbus
2439#
2440# cbb: pci/cardbus bridge implementing YENTA interface
2441# pccard: pccard slots
2442# cardbus: cardbus slots
2443device cbb
2444device pccard
2445device cardbus
2446
2447#
2448# MMC/SD
2449#
2450# mmc MMC/SD bus
2451# mmcsd MMC/SD memory card
2452# sdhci Generic PCI SD Host Controller
2453#
2454device mmc
2455device mmcsd
2456device sdhci
2457
2458#
2459# SMB bus
2460#
2461# System Management Bus support is provided by the 'smbus' device.
2462# Access to the SMBus device is via the 'smb' device (/dev/smb*),
2463# which is a child of the 'smbus' device.
2464#
2465# Supported devices:
2466# smb standard I/O through /dev/smb*
2467#
2468# Supported SMB interfaces:
2469# iicsmb I2C to SMB bridge with any iicbus interface
2470# bktr brooktree848 I2C hardware interface
2471# intpm Intel PIIX4 (82371AB, 82443MX) Power Management Unit
2472# alpm Acer Aladdin-IV/V/Pro2 Power Management Unit
2473# ichsmb Intel ICH SMBus controller chips (82801AA, 82801AB, 82801BA)
2474# viapm VIA VT82C586B/596B/686A and VT8233 Power Management Unit
2475# amdpm AMD 756 Power Management Unit
2476# amdsmb AMD 8111 SMBus 2.0 Controller
2477# nfpm NVIDIA nForce Power Management Unit
2478# nfsmb NVIDIA nForce2/3/4 MCP SMBus 2.0 Controller
2479#
2480device smbus # Bus support, required for smb below.
2481
2482device intpm
2483device alpm
2484device ichsmb
2485device viapm
2486device amdpm
2487device amdsmb
2488device nfpm
2489device nfsmb
2490
2491device smb
2492
2493#
2494# I2C Bus
2495#
2496# Philips i2c bus support is provided by the `iicbus' device.
2497#
2498# Supported devices:
2499# ic i2c network interface
2500# iic i2c standard io
2501# iicsmb i2c to smb bridge. Allow i2c i/o with smb commands.
2502#
2503# Supported interfaces:
2504# bktr brooktree848 I2C software interface
2505#
2506# Other:
2507# iicbb generic I2C bit-banging code (needed by lpbb, bktr)
2508#
2509device iicbus # Bus support, required for ic/iic/iicsmb below.
2510device iicbb
2511
2512device ic
2513device iic
2514device iicsmb # smb over i2c bridge
2515
2516# I2C peripheral devices
2517#
2518# ds133x Dallas Semiconductor DS1337, DS1338 and DS1339 RTC
2519# ds1672 Dallas Semiconductor DS1672 RTC
2520#
2521device ds133x
2522device ds1672
2523
2524# Parallel-Port Bus
2525#
2526# Parallel port bus support is provided by the `ppbus' device.
2527# Multiple devices may be attached to the parallel port, devices
2528# are automatically probed and attached when found.
2529#
2530# Supported devices:
2531# vpo Iomega Zip Drive
2532# Requires SCSI disk support ('scbus' and 'da'), best
2533# performance is achieved with ports in EPP 1.9 mode.
2534# lpt Parallel Printer
2535# plip Parallel network interface
2536# ppi General-purpose I/O ("Geek Port") + IEEE1284 I/O
2537# pps Pulse per second Timing Interface
2538# lpbb Philips official parallel port I2C bit-banging interface
2539# pcfclock Parallel port clock driver.
2540#
2541# Supported interfaces:
2542# ppc ISA-bus parallel port interfaces.
2543#
2544
2545options PPC_PROBE_CHIPSET # Enable chipset specific detection
2546 # (see flags in ppc(4))
2547options DEBUG_1284 # IEEE1284 signaling protocol debug
2548options PERIPH_1284 # Makes your computer act as an IEEE1284
2549 # compliant peripheral
2550options DONTPROBE_1284 # Avoid boot detection of PnP parallel devices
2551options VP0_DEBUG # ZIP/ZIP+ debug
2552options LPT_DEBUG # Printer driver debug
2553options PPC_DEBUG # Parallel chipset level debug
2554options PLIP_DEBUG # Parallel network IP interface debug
2555options PCFCLOCK_VERBOSE # Verbose pcfclock driver
2556options PCFCLOCK_MAX_RETRIES=5 # Maximum read tries (default 10)
2557
2558device ppc
2559hint.ppc.0.at="isa"
2560hint.ppc.0.irq="7"
2561device ppbus
2562device vpo
2563device lpt
2564device plip
2565device ppi
2566device pps
2567device lpbb
2568device pcfclock
2569
2570# Kernel BOOTP support
2571
2572options BOOTP # Use BOOTP to obtain IP address/hostname
2573 # Requires NFSCLIENT and NFS_ROOT
2574options BOOTP_NFSROOT # NFS mount root filesystem using BOOTP info
2575options BOOTP_NFSV3 # Use NFS v3 to NFS mount root
2576options BOOTP_COMPAT # Workaround for broken bootp daemons.
2577options BOOTP_WIRED_TO=fxp0 # Use interface fxp0 for BOOTP
2578options BOOTP_BLOCKSIZE=8192 # Override NFS block size
2579
2580#
2581# Add software watchdog routines.
2582#
2583options SW_WATCHDOG
2584
2585#
2586# Add the software deadlock resolver thread.
2587#
2588options DEADLKRES
2589
2590#
2591# Disable swapping of stack pages. This option removes all
2592# code which actually performs swapping, so it's not possible to turn
2593# it back on at run-time.
2594#
2595# This is sometimes usable for systems which don't have any swap space
2596# (see also sysctls "vm.defer_swapspace_pageouts" and
2597# "vm.disable_swapspace_pageouts")
2598#
2599#options NO_SWAPPING
2600
2601# Set the number of sf_bufs to allocate. sf_bufs are virtual buffers
2602# for sendfile(2) that are used to map file VM pages, and normally
2603# default to a quantity that is roughly 16*MAXUSERS+512. You would
2604# typically want about 4 of these for each simultaneous file send.
2605#
2606options NSFBUFS=1024
2607
2608#
2609# Enable extra debugging code for locks. This stores the filename and
2610# line of whatever acquired the lock in the lock itself, and changes a
2611# number of function calls to pass around the relevant data. This is
2612# not at all useful unless you are debugging lock code. Also note
2613# that it is likely to break e.g. fstat(1) unless you recompile your
2614# userland with -DDEBUG_LOCKS as well.
2615#
2616options DEBUG_LOCKS
2617
2618
2619#####################################################################
2620# USB support
2621# UHCI controller
2622device uhci
2623# OHCI controller
2624device ohci
2625# EHCI controller
2626device ehci
2627# XHCI controller
2628device xhci
2629# SL811 Controller
2630#device slhci
2631# General USB code (mandatory for USB)
2632device usb
2633#
2634# USB Double Bulk Pipe devices
2635device udbp
2636# USB Fm Radio
2637device ufm
2638# Human Interface Device (anything with buttons and dials)
2639device uhid
2640# USB keyboard
2641device ukbd
2642# USB printer
2643device ulpt
2644# USB mass storage driver (Requires scbus and da)
2645device umass
2646# USB mass storage driver for device-side mode
2647device usfs
2648# USB support for Belkin F5U109 and Magic Control Technology serial adapters
2649device umct
2650# USB modem support
2651device umodem
2652# USB mouse
2653device ums
2654# eGalax USB touch screen
2655device uep
2656# Diamond Rio 500 MP3 player
2657device urio
2658#
2659# USB serial support
2660device ucom
2661# USB support for 3G modem cards by Option, Novatel, Huawei and Sierra
2662device u3g
2663# USB support for Technologies ARK3116 based serial adapters
2664device uark
2665# USB support for Belkin F5U103 and compatible serial adapters
2666device ubsa
2667# USB support for serial adapters based on the FT8U100AX and FT8U232AM
2668device uftdi
2669# USB support for some Windows CE based serial communication.
2670device uipaq
2671# USB support for Prolific PL-2303 serial adapters
2672device uplcom
2673# USB support for Silicon Laboratories CP2101/CP2102 based USB serial adapters
2674device uslcom
2675# USB Visor and Palm devices
2676device uvisor
2677# USB serial support for DDI pocket's PHS
2678device uvscom
2679#
2680# ADMtek USB ethernet. Supports the LinkSys USB100TX,
2681# the Billionton USB100, the Melco LU-ATX, the D-Link DSB-650TX
2682# and the SMC 2202USB. Also works with the ADMtek AN986 Pegasus
2683# eval board.
2684device aue
2685
2686# ASIX Electronics AX88172 USB 2.0 ethernet driver. Used in the
2687# LinkSys USB200M and various other adapters.
2688device axe
2689
2690#
2691# Devices which communicate using Ethernet over USB, particularly
2692# Communication Device Class (CDC) Ethernet specification. Supports
2693# Sharp Zaurus PDAs, some DOCSIS cable modems and so on.
2694device cdce
2695#
2696# CATC USB-EL1201A USB ethernet. Supports the CATC Netmate
2697# and Netmate II, and the Belkin F5U111.
2698device cue
2699#
2700# Kawasaki LSI ethernet. Supports the LinkSys USB10T,
2701# Entrega USB-NET-E45, Peracom Ethernet Adapter, the
2702# 3Com 3c19250, the ADS Technologies USB-10BT, the ATen UC10T,
2703# the Netgear EA101, the D-Link DSB-650, the SMC 2102USB
2704# and 2104USB, and the Corega USB-T.
2705device kue
2706#
2707# RealTek RTL8150 USB to fast ethernet. Supports the Melco LUA-KTX
2708# and the GREEN HOUSE GH-USB100B.
2709device rue
2710#
2711# Davicom DM9601E USB to fast ethernet. Supports the Corega FEther USB-TXC.
2712device udav
2713#
2714# HSxPA devices from Option N.V
2715device uhso
2716
2717#
2718# Ralink Technology RT2501USB/RT2601USB wireless driver
2719device rum
2720# Ralink Technology RT2700U/RT2800U/RT3000U wireless driver
2721device run
2722#
2723# Atheros AR5523 wireless driver
2724device uath
2725#
2726# Ralink Technology RT2500USB wireless driver
2727device ural
2728#
2729# ZyDas ZD1211/ZD1211B wireless driver
2730device zyd
2731
2732#
2733# debugging options for the USB subsystem
2734#
2735options USB_DEBUG
2736options U3G_DEBUG
2737
2738# options for ukbd:
2739options UKBD_DFLT_KEYMAP # specify the built-in keymap
2740makeoptions UKBD_DFLT_KEYMAP=it.iso
2741
2742# options for uplcom:
2743options UPLCOM_INTR_INTERVAL=100 # interrupt pipe interval
2744 # in milliseconds
2745
2746# options for uvscom:
2747options UVSCOM_DEFAULT_OPKTSIZE=8 # default output packet size
2748options UVSCOM_INTR_INTERVAL=100 # interrupt pipe interval
2749 # in milliseconds
2750
2751#####################################################################
2752# FireWire support
2753
2754device firewire # FireWire bus code
2755device sbp # SCSI over Firewire (Requires scbus and da)
2756device sbp_targ # SBP-2 Target mode (Requires scbus and targ)
2757device fwe # Ethernet over FireWire (non-standard!)
2758device fwip # IP over FireWire (RFC2734 and RFC3146)
2759
2760#####################################################################
2761# dcons support (Dumb Console Device)
2762
2763device dcons # dumb console driver
2764device dcons_crom # FireWire attachment
2765options DCONS_BUF_SIZE=16384 # buffer size
2766options DCONS_POLL_HZ=100 # polling rate
2767options DCONS_FORCE_CONSOLE=0 # force to be the primary console
2768options DCONS_FORCE_GDB=1 # force to be the gdb device
2769
2770#####################################################################
2771# crypto subsystem
2772#
2773# This is a port of the OpenBSD crypto framework. Include this when
2774# configuring IPSEC and when you have a h/w crypto device to accelerate
2775# user applications that link to OpenSSL.
2776#
2777# Drivers are ports from OpenBSD with some simple enhancements that have
2778# been fed back to OpenBSD.
2779
2780device crypto # core crypto support
2781device cryptodev # /dev/crypto for access to h/w
2782
2783device rndtest # FIPS 140-2 entropy tester
2784
2785device hifn # Hifn 7951, 7781, etc.
2786options HIFN_DEBUG # enable debugging support: hw.hifn.debug
2787options HIFN_RNDTEST # enable rndtest support
2788
2789device ubsec # Broadcom 5501, 5601, 58xx
2790options UBSEC_DEBUG # enable debugging support: hw.ubsec.debug
2791options UBSEC_RNDTEST # enable rndtest support
2792
2793#####################################################################
2794
2795
2796#
2797# Embedded system options:
2798#
2799# An embedded system might want to run something other than init.
2800options INIT_PATH=/sbin/init:/stand/sysinstall
2801
2802# Debug options
2803options BUS_DEBUG # enable newbus debugging
2804options DEBUG_VFS_LOCKS # enable VFS lock debugging
2805options SOCKBUF_DEBUG # enable sockbuf last record/mb tail checking
2806
2807#
2808# Verbose SYSINIT
2809#
2810# Make the SYSINIT process performed by mi_startup() verbose. This is very
2811# useful when porting to a new architecture. If DDB is also enabled, this
2812# will print function names instead of addresses.
2813options VERBOSE_SYSINIT
2814
2815#####################################################################
2816# SYSV IPC KERNEL PARAMETERS
2817#
2818# Maximum number of entries in a semaphore map.
2819options SEMMAP=31
2820
2821# Maximum number of System V semaphores that can be used on the system at
2822# one time.
2823options SEMMNI=11
2824
2825# Total number of semaphores system wide
2826options SEMMNS=61
2827
2828# Total number of undo structures in system
2829options SEMMNU=31
2830
2831# Maximum number of System V semaphores that can be used by a single process
2832# at one time.
2833options SEMMSL=61
2834
2835# Maximum number of operations that can be outstanding on a single System V
2836# semaphore at one time.
2837options SEMOPM=101
2838
2839# Maximum number of undo operations that can be outstanding on a single
2840# System V semaphore at one time.
2841options SEMUME=11
2842
2843# Maximum number of shared memory pages system wide.
2844options SHMALL=1025
2845
2846# Maximum size, in bytes, of a single System V shared memory region.
2847options SHMMAX=(SHMMAXPGS*PAGE_SIZE+1)
2848options SHMMAXPGS=1025
2849
2850# Minimum size, in bytes, of a single System V shared memory region.
2851options SHMMIN=2
2852
2853# Maximum number of shared memory regions that can be used on the system
2854# at one time.
2855options SHMMNI=33
2856
2857# Maximum number of System V shared memory regions that can be attached to
2858# a single process at one time.
2859options SHMSEG=9
2860
2861# Compress user core dumps.
2862options COMPRESS_USER_CORES
2863# required to compress file output from kernel for COMPRESS_USER_CORES.
2864device gzio
2865
2866# Set the amount of time (in seconds) the system will wait before
2867# rebooting automatically when a kernel panic occurs. If set to (-1),
2868# the system will wait indefinitely until a key is pressed on the
2869# console.
2870options PANIC_REBOOT_WAIT_TIME=16
2871
2872# Attempt to bypass the buffer cache and put data directly into the
2873# userland buffer for read operation when O_DIRECT flag is set on the
2874# file. Both offset and length of the read operation must be
2875# multiples of the physical media sector size.
2876#
2877options DIRECTIO
2878
2879# Specify a lower limit for the number of swap I/O buffers. They are
2880# (among other things) used when bypassing the buffer cache due to
2881# DIRECTIO kernel option enabled and O_DIRECT flag set on file.
2882#
2883options NSWBUF_MIN=120
2884
2885#####################################################################
2886
2887# More undocumented options for linting.
2888# Note that documenting these is not considered an affront.
2889
2890options CAM_DEBUG_DELAY
2891
2892# VFS cluster debugging.
2893options CLUSTERDEBUG
2894
2895options DEBUG
2896
2897# Kernel filelock debugging.
2898options LOCKF_DEBUG
2899
2900# System V compatible message queues
2901# Please note that the values provided here are used to test kernel
2902# building. The defaults in the sources provide almost the same numbers.
2903# MSGSSZ must be a power of 2 between 8 and 1024.
2904options MSGMNB=2049 # Max number of chars in queue
2905options MSGMNI=41 # Max number of message queue identifiers
2906options MSGSEG=2049 # Max number of message segments
2907options MSGSSZ=16 # Size of a message segment
2908options MSGTQL=41 # Max number of messages in system
2909
2910options NBUF=512 # Number of buffer headers
2911
2912options SCSI_NCR_DEBUG
2913options SCSI_NCR_MAX_SYNC=10000
2914options SCSI_NCR_MAX_WIDE=1
2915options SCSI_NCR_MYADDR=7
2916
2917options SC_DEBUG_LEVEL=5 # Syscons debug level
2918options SC_RENDER_DEBUG # syscons rendering debugging
2919
2920options SHOW_BUSYBUFS # List buffers that prevent root unmount
2921options VFS_BIO_DEBUG # VFS buffer I/O debugging
2922
2923options KSTACK_MAX_PAGES=32 # Maximum pages to give the kernel stack
2924
2925# Adaptec Array Controller driver options
2926options AAC_DEBUG # Debugging levels:
2927 # 0 - quiet, only emit warnings
2928 # 1 - noisy, emit major function
2929 # points and things done
2930 # 2 - extremely noisy, emit trace
2931 # items in loops, etc.
2932
2933# Resource Accounting
2934options RACCT
2935
2936# Yet more undocumented options for linting.
2937# BKTR_ALLOC_PAGES has no effect except to cause warnings, and
2938# BROOKTREE_ALLOC_PAGES hasn't actually been superseded by it, since the
2939# driver still mostly spells this option BROOKTREE_ALLOC_PAGES.
2940##options BKTR_ALLOC_PAGES=(217*4+1)
2941options BROOKTREE_ALLOC_PAGES=(217*4+1)
2942options MAXFILES=999
2943
2#
3# NOTES -- Lines that can be cut/pasted into kernel and hints configs.
4#
5# Lines that begin with 'device', 'options', 'machine', 'ident', 'maxusers',
6# 'makeoptions', 'hints', etc. go into the kernel configuration that you
7# run config(8) with.
8#
9# Lines that begin with 'hint.' are NOT for config(8), they go into your
10# hints file. See /boot/device.hints and/or the 'hints' config(8) directive.
11#
12# Please use ``make LINT'' to create an old-style LINT file if you want to
13# do kernel test-builds.
14#
15# This file contains machine independent kernel configuration notes. For
16# machine dependent notes, look in /sys/<arch>/conf/NOTES.
17#
18
19#
20# NOTES conventions and style guide:
21#
22# Large block comments should begin and end with a line containing only a
23# comment character.
24#
25# To describe a particular object, a block comment (if it exists) should
26# come first. Next should come device, options, and hints lines in that
27# order. All device and option lines must be described by a comment that
28# doesn't just expand the device or option name. Use only a concise
29# comment on the same line if possible. Very detailed descriptions of
30# devices and subsystems belong in man pages.
31#
32# A space followed by a tab separates 'options' from an option name. Two
33# spaces followed by a tab separate 'device' from a device name. Comments
34# after an option or device should use one space after the comment character.
35# To comment out a negative option that disables code and thus should not be
36# enabled for LINT builds, precede 'options' with "#!".
37#
38
39#
40# This is the ``identification'' of the kernel. Usually this should
41# be the same as the name of your kernel.
42#
43ident LINT
44
45#
46# The `maxusers' parameter controls the static sizing of a number of
47# internal system tables by a formula defined in subr_param.c.
48# Omitting this parameter or setting it to 0 will cause the system to
49# auto-size based on physical memory.
50#
51maxusers 10
52
53# To statically compile in device wiring instead of /boot/device.hints
54#hints "LINT.hints" # Default places to look for devices.
55
56# Use the following to compile in values accessible to the kernel
57# through getenv() (or kenv(1) in userland). The format of the file
58# is 'variable=value', see kenv(1)
59#
60#env "LINT.env"
61
62#
63# The `makeoptions' parameter allows variables to be passed to the
64# generated Makefile in the build area.
65#
66# CONF_CFLAGS gives some extra compiler flags that are added to ${CFLAGS}
67# after most other flags. Here we use it to inhibit use of non-optimal
68# gcc built-in functions (e.g., memcmp).
69#
70# DEBUG happens to be magic.
71# The following is equivalent to 'config -g KERNELNAME' and creates
72# 'kernel.debug' compiled with -g debugging as well as a normal
73# 'kernel'. Use 'make install.debug' to install the debug kernel
74# but that isn't normally necessary as the debug symbols are not loaded
75# by the kernel and are not useful there anyway.
76#
77# KERNEL can be overridden so that you can change the default name of your
78# kernel.
79#
80# MODULES_OVERRIDE can be used to limit modules built to a specific list.
81#
82makeoptions CONF_CFLAGS=-fno-builtin #Don't allow use of memcmp, etc.
83#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
84#makeoptions KERNEL=foo #Build kernel "foo" and install "/foo"
85# Only build ext2fs module plus those parts of the sound system I need.
86#makeoptions MODULES_OVERRIDE="ext2fs sound/sound sound/driver/maestro3"
87makeoptions DESTDIR=/tmp
88
89#
90# FreeBSD processes are subject to certain limits to their consumption
91# of system resources. See getrlimit(2) for more details. Each
92# resource limit has two values, a "soft" limit and a "hard" limit.
93# The soft limits can be modified during normal system operation, but
94# the hard limits are set at boot time. Their default values are
95# in sys/<arch>/include/vmparam.h. There are two ways to change them:
96#
97# 1. Set the values at kernel build time. The options below are one
98# way to allow that limit to grow to 1GB. They can be increased
99# further by changing the parameters:
100#
101# 2. In /boot/loader.conf, set the tunables kern.maxswzone,
102# kern.maxbcache, kern.maxtsiz, kern.dfldsiz, kern.maxdsiz,
103# kern.dflssiz, kern.maxssiz and kern.sgrowsiz.
104#
105# The options in /boot/loader.conf override anything in the kernel
106# configuration file. See the function init_param1 in
107# sys/kern/subr_param.c for more details.
108#
109
110options MAXDSIZ=(1024UL*1024*1024)
111options MAXSSIZ=(128UL*1024*1024)
112options DFLDSIZ=(1024UL*1024*1024)
113
114#
115# BLKDEV_IOSIZE sets the default block size used in user block
116# device I/O. Note that this value will be overridden by the label
117# when specifying a block device from a label with a non-0
118# partition blocksize. The default is PAGE_SIZE.
119#
120options BLKDEV_IOSIZE=8192
121
122#
123# MAXPHYS and DFLTPHYS
124#
125# These are the maximal and safe 'raw' I/O block device access sizes.
126# Reads and writes will be split into MAXPHYS chunks for known good
127# devices and DFLTPHYS for the rest. Some applications have better
128# performance with larger raw I/O access sizes. Note that certain VM
129# parameters are derived from these values and making them too large
130# can make an an unbootable kernel.
131#
132# The defaults are 64K and 128K respectively.
133options DFLTPHYS=(64*1024)
134options MAXPHYS=(128*1024)
135
136
137# This allows you to actually store this configuration file into
138# the kernel binary itself. See config(8) for more details.
139#
140options INCLUDE_CONFIG_FILE # Include this file in kernel
141
142options GEOM_AES # Don't use, use GEOM_BDE
143options GEOM_BDE # Disk encryption.
144options GEOM_BSD # BSD disklabels
145options GEOM_CACHE # Disk cache.
146options GEOM_CONCAT # Disk concatenation.
147options GEOM_ELI # Disk encryption.
148options GEOM_FOX # Redundant path mitigation
149options GEOM_GATE # Userland services.
150options GEOM_JOURNAL # Journaling.
151options GEOM_LABEL # Providers labelization.
152options GEOM_LINUX_LVM # Linux LVM2 volumes
153options GEOM_MBR # DOS/MBR partitioning
154options GEOM_MIRROR # Disk mirroring.
155options GEOM_MULTIPATH # Disk multipath
156options GEOM_NOP # Test class.
157options GEOM_PART_APM # Apple partitioning
158options GEOM_PART_BSD # BSD disklabel
159options GEOM_PART_EBR # Extended Boot Records
160options GEOM_PART_EBR_COMPAT # Backward compatible partition names
161options GEOM_PART_GPT # GPT partitioning
162options GEOM_PART_MBR # MBR partitioning
163options GEOM_PART_PC98 # PC-9800 disk partitioning
164options GEOM_PART_VTOC8 # SMI VTOC8 disk label
165options GEOM_PC98 # NEC PC9800 partitioning
166options GEOM_RAID # Soft RAID functionality.
167options GEOM_RAID3 # RAID3 functionality.
168options GEOM_SHSEC # Shared secret.
169options GEOM_STRIPE # Disk striping.
170options GEOM_SUNLABEL # Sun/Solaris partitioning
171options GEOM_UZIP # Read-only compressed disks
172options GEOM_VIRSTOR # Virtual storage.
173options GEOM_VOL # Volume names from UFS superblock
174options GEOM_ZERO # Performance testing helper.
175
176#
177# The root device and filesystem type can be compiled in;
178# this provides a fallback option if the root device cannot
179# be correctly guessed by the bootstrap code, or an override if
180# the RB_DFLTROOT flag (-r) is specified when booting the kernel.
181#
182options ROOTDEVNAME=\"ufs:da0s2e\"
183
184
185#####################################################################
186# Scheduler options:
187#
188# Specifying one of SCHED_4BSD or SCHED_ULE is mandatory. These options
189# select which scheduler is compiled in.
190#
191# SCHED_4BSD is the historical, proven, BSD scheduler. It has a global run
192# queue and no CPU affinity which makes it suboptimal for SMP. It has very
193# good interactivity and priority selection.
194#
195# SCHED_ULE provides significant performance advantages over 4BSD on many
196# workloads on SMP machines. It supports cpu-affinity, per-cpu runqueues
197# and scheduler locks. It also has a stronger notion of interactivity
198# which leads to better responsiveness even on uniprocessor machines. This
199# is the default scheduler.
200#
201# SCHED_STATS is a debugging option which keeps some stats in the sysctl
202# tree at 'kern.sched.stats' and is useful for debugging scheduling decisions.
203#
204options SCHED_4BSD
205options SCHED_STATS
206#options SCHED_ULE
207
208#####################################################################
209# SMP OPTIONS:
210#
211# SMP enables building of a Symmetric MultiProcessor Kernel.
212
213# Mandatory:
214options SMP # Symmetric MultiProcessor Kernel
215
216# ADAPTIVE_MUTEXES changes the behavior of blocking mutexes to spin
217# if the thread that currently owns the mutex is executing on another
218# CPU. This behaviour is enabled by default, so this option can be used
219# to disable it.
220options NO_ADAPTIVE_MUTEXES
221
222# ADAPTIVE_RWLOCKS changes the behavior of reader/writer locks to spin
223# if the thread that currently owns the rwlock is executing on another
224# CPU. This behaviour is enabled by default, so this option can be used
225# to disable it.
226options NO_ADAPTIVE_RWLOCKS
227
228# ADAPTIVE_SX changes the behavior of sx locks to spin if the thread that
229# currently owns the sx lock is executing on another CPU.
230# This behaviour is enabled by default, so this option can be used to
231# disable it.
232options NO_ADAPTIVE_SX
233
234# MUTEX_NOINLINE forces mutex operations to call functions to perform each
235# operation rather than inlining the simple cases. This can be used to
236# shrink the size of the kernel text segment. Note that this behavior is
237# already implied by the INVARIANT_SUPPORT, INVARIANTS, KTR, LOCK_PROFILING,
238# and WITNESS options.
239options MUTEX_NOINLINE
240
241# RWLOCK_NOINLINE forces rwlock operations to call functions to perform each
242# operation rather than inlining the simple cases. This can be used to
243# shrink the size of the kernel text segment. Note that this behavior is
244# already implied by the INVARIANT_SUPPORT, INVARIANTS, KTR, LOCK_PROFILING,
245# and WITNESS options.
246options RWLOCK_NOINLINE
247
248# SX_NOINLINE forces sx lock operations to call functions to perform each
249# operation rather than inlining the simple cases. This can be used to
250# shrink the size of the kernel text segment. Note that this behavior is
251# already implied by the INVARIANT_SUPPORT, INVARIANTS, KTR, LOCK_PROFILING,
252# and WITNESS options.
253options SX_NOINLINE
254
255# SMP Debugging Options:
256#
257# PREEMPTION allows the threads that are in the kernel to be preempted by
258# higher priority [interrupt] threads. It helps with interactivity
259# and allows interrupt threads to run sooner rather than waiting.
260# WARNING! Only tested on amd64 and i386.
261# FULL_PREEMPTION instructs the kernel to preempt non-realtime kernel
262# threads. Its sole use is to expose race conditions and other
263# bugs during development. Enabling this option will reduce
264# performance and increase the frequency of kernel panics by
265# design. If you aren't sure that you need it then you don't.
266# Relies on the PREEMPTION option. DON'T TURN THIS ON.
267# MUTEX_DEBUG enables various extra assertions in the mutex code.
268# SLEEPQUEUE_PROFILING enables rudimentary profiling of the hash table
269# used to hold active sleep queues as well as sleep wait message
270# frequency.
271# TURNSTILE_PROFILING enables rudimentary profiling of the hash table
272# used to hold active lock queues.
273# WITNESS enables the witness code which detects deadlocks and cycles
274# during locking operations.
275# WITNESS_KDB causes the witness code to drop into the kernel debugger if
276# a lock hierarchy violation occurs or if locks are held when going to
277# sleep.
278# WITNESS_SKIPSPIN disables the witness checks on spin mutexes.
279options PREEMPTION
280options FULL_PREEMPTION
281options MUTEX_DEBUG
282options WITNESS
283options WITNESS_KDB
284options WITNESS_SKIPSPIN
285
286# LOCK_PROFILING - Profiling locks. See LOCK_PROFILING(9) for details.
287options LOCK_PROFILING
288# Set the number of buffers and the hash size. The hash size MUST be larger
289# than the number of buffers. Hash size should be prime.
290options MPROF_BUFFERS="1536"
291options MPROF_HASH_SIZE="1543"
292
293# Profiling for internal hash tables.
294options SLEEPQUEUE_PROFILING
295options TURNSTILE_PROFILING
296
297
298#####################################################################
299# COMPATIBILITY OPTIONS
300
301#
302# Implement system calls compatible with 4.3BSD and older versions of
303# FreeBSD. You probably do NOT want to remove this as much current code
304# still relies on the 4.3 emulation. Note that some architectures that
305# are supported by FreeBSD do not include support for certain important
306# aspects of this compatibility option, namely those related to the
307# signal delivery mechanism.
308#
309options COMPAT_43
310
311# Old tty interface.
312options COMPAT_43TTY
313
314# Note that as a general rule, COMPAT_FREEBSD<n> depends on
315# COMPAT_FREEBSD<n+1>, COMPAT_FREEBSD<n+2>, etc.
316
317# Enable FreeBSD4 compatibility syscalls
318options COMPAT_FREEBSD4
319
320# Enable FreeBSD5 compatibility syscalls
321options COMPAT_FREEBSD5
322
323# Enable FreeBSD6 compatibility syscalls
324options COMPAT_FREEBSD6
325
326# Enable FreeBSD7 compatibility syscalls
327options COMPAT_FREEBSD7
328
329#
330# These three options provide support for System V Interface
331# Definition-style interprocess communication, in the form of shared
332# memory, semaphores, and message queues, respectively.
333#
334options SYSVSHM
335options SYSVSEM
336options SYSVMSG
337
338
339#####################################################################
340# DEBUGGING OPTIONS
341
342#
343# Compile with kernel debugger related code.
344#
345options KDB
346
347#
348# Print a stack trace of the current thread on the console for a panic.
349#
350options KDB_TRACE
351
352#
353# Don't enter the debugger for a panic. Intended for unattended operation
354# where you may want to enter the debugger from the console, but still want
355# the machine to recover from a panic.
356#
357options KDB_UNATTENDED
358
359#
360# Enable the ddb debugger backend.
361#
362options DDB
363
364#
365# Print the numerical value of symbols in addition to the symbolic
366# representation.
367#
368options DDB_NUMSYM
369
370#
371# Enable the remote gdb debugger backend.
372#
373options GDB
374
375#
376# SYSCTL_DEBUG enables a 'sysctl' debug tree that can be used to dump the
377# contents of the registered sysctl nodes on the console. It is disabled by
378# default because it generates excessively verbose console output that can
379# interfere with serial console operation.
380#
381options SYSCTL_DEBUG
382
383#
384# NO_SYSCTL_DESCR omits the sysctl node descriptions to save space in the
385# resulting kernel.
386options NO_SYSCTL_DESCR
387
388#
389# MALLOC_DEBUG_MAXZONES enables multiple uma zones for malloc(9)
390# allocations that are smaller than a page. The purpose is to isolate
391# different malloc types into hash classes, so that any buffer
392# overruns or use-after-free will usually only affect memory from
393# malloc types in that hash class. This is purely a debugging tool;
394# by varying the hash function and tracking which hash class was
395# corrupted, the intersection of the hash classes from each instance
396# will point to a single malloc type that is being misused. At this
397# point inspection or memguard(9) can be used to catch the offending
398# code.
399#
400options MALLOC_DEBUG_MAXZONES=8
401
402#
403# DEBUG_MEMGUARD builds and enables memguard(9), a replacement allocator
404# for the kernel used to detect modify-after-free scenarios. See the
405# memguard(9) man page for more information on usage.
406#
407options DEBUG_MEMGUARD
408
409#
410# DEBUG_REDZONE enables buffer underflows and buffer overflows detection for
411# malloc(9).
412#
413options DEBUG_REDZONE
414
415#
416# KTRACE enables the system-call tracing facility ktrace(2). To be more
417# SMP-friendly, KTRACE uses a worker thread to process most trace events
418# asynchronously to the thread generating the event. This requires a
419# pre-allocated store of objects representing trace events. The
420# KTRACE_REQUEST_POOL option specifies the initial size of this store.
421# The size of the pool can be adjusted both at boottime and runtime via
422# the kern.ktrace_request_pool tunable and sysctl.
423#
424options KTRACE #kernel tracing
425options KTRACE_REQUEST_POOL=101
426
427#
428# KTR is a kernel tracing facility imported from BSD/OS. It is
429# enabled with the KTR option. KTR_ENTRIES defines the number of
430# entries in the circular trace buffer; it must be a power of two.
431# KTR_COMPILE defines the mask of events to compile into the kernel as
432# defined by the KTR_* constants in <sys/ktr.h>. KTR_MASK defines the
433# initial value of the ktr_mask variable which determines at runtime
434# what events to trace. KTR_CPUMASK determines which CPU's log
435# events, with bit X corresponding to CPU X. KTR_VERBOSE enables
436# dumping of KTR events to the console by default. This functionality
437# can be toggled via the debug.ktr_verbose sysctl and defaults to off
438# if KTR_VERBOSE is not defined. See ktr(4) and ktrdump(8) for details.
439#
440options KTR
441options KTR_ENTRIES=1024
442options KTR_COMPILE=(KTR_INTR|KTR_PROC)
443options KTR_MASK=KTR_INTR
444options KTR_CPUMASK=0x3
445options KTR_VERBOSE
446
447#
448# ALQ(9) is a facility for the asynchronous queuing of records from the kernel
449# to a vnode, and is employed by services such as ktr(4) to produce trace
450# files based on a kernel event stream. Records are written asynchronously
451# in a worker thread.
452#
453options ALQ
454options KTR_ALQ
455
456#
457# The INVARIANTS option is used in a number of source files to enable
458# extra sanity checking of internal structures. This support is not
459# enabled by default because of the extra time it would take to check
460# for these conditions, which can only occur as a result of
461# programming errors.
462#
463options INVARIANTS
464
465#
466# The INVARIANT_SUPPORT option makes us compile in support for
467# verifying some of the internal structures. It is a prerequisite for
468# 'INVARIANTS', as enabling 'INVARIANTS' will make these functions be
469# called. The intent is that you can set 'INVARIANTS' for single
470# source files (by changing the source file or specifying it on the
471# command line) if you have 'INVARIANT_SUPPORT' enabled. Also, if you
472# wish to build a kernel module with 'INVARIANTS', then adding
473# 'INVARIANT_SUPPORT' to your kernel will provide all the necessary
474# infrastructure without the added overhead.
475#
476options INVARIANT_SUPPORT
477
478#
479# The DIAGNOSTIC option is used to enable extra debugging information
480# from some parts of the kernel. As this makes everything more noisy,
481# it is disabled by default.
482#
483options DIAGNOSTIC
484
485#
486# REGRESSION causes optional kernel interfaces necessary only for regression
487# testing to be enabled. These interfaces may constitute security risks
488# when enabled, as they permit processes to easily modify aspects of the
489# run-time environment to reproduce unlikely or unusual (possibly normally
490# impossible) scenarios.
491#
492options REGRESSION
493
494#
495# RESTARTABLE_PANICS allows one to continue from a panic as if it were
496# a call to the debugger to continue from a panic as instead. It is only
497# useful if a kernel debugger is present. To restart from a panic, reset
498# the panicstr variable to NULL and continue execution. This option is
499# for development use only and should NOT be used in production systems
500# to "workaround" a panic.
501#
502#options RESTARTABLE_PANICS
503
504#
505# This option lets some drivers co-exist that can't co-exist in a running
506# system. This is used to be able to compile all kernel code in one go for
507# quality assurance purposes (like this file, which the option takes it name
508# from.)
509#
510options COMPILING_LINT
511
512#
513# STACK enables the stack(9) facility, allowing the capture of kernel stack
514# for the purpose of procinfo(1), etc. stack(9) will also be compiled in
515# automatically if DDB(4) is compiled into the kernel.
516#
517options STACK
518
519
520#####################################################################
521# PERFORMANCE MONITORING OPTIONS
522
523#
524# The hwpmc driver that allows the use of in-CPU performance monitoring
525# counters for performance monitoring. The base kernel needs to be configured
526# with the 'options' line, while the hwpmc device can be either compiled
527# in or loaded as a loadable kernel module.
528#
529# Additional configuration options may be required on specific architectures,
530# please see hwpmc(4).
531
532device hwpmc # Driver (also a loadable module)
533options HWPMC_HOOKS # Other necessary kernel hooks
534
535
536#####################################################################
537# NETWORKING OPTIONS
538
539#
540# Protocol families
541#
542options INET #Internet communications protocols
543options INET6 #IPv6 communications protocols
544
545options ROUTETABLES=2 # max 16. 1 is back compatible.
546
547# In order to enable IPSEC you MUST also add device crypto to
548# your kernel configuration
549options IPSEC #IP security (requires device crypto)
550#options IPSEC_DEBUG #debug for IP security
551#
552# #DEPRECATED#
553# Set IPSEC_FILTERTUNNEL to change the default of the sysctl to force packets
554# coming through a tunnel to be processed by any configured packet filtering
555# twice. The default is that packets coming out of a tunnel are _not_ processed;
556# they are assumed trusted.
557#
558# IPSEC history is preserved for such packets, and can be filtered
559# using ipfw(8)'s 'ipsec' keyword, when this option is enabled.
560#
561#options IPSEC_FILTERTUNNEL #filter ipsec packets from a tunnel
562#
563# Set IPSEC_NAT_T to enable NAT-Traversal support. This enables
564# optional UDP encapsulation of ESP packets.
565#
566options IPSEC_NAT_T #NAT-T support, UDP encap of ESP
567
568options IPX #IPX/SPX communications protocols
569
570options NCP #NetWare Core protocol
571
572options NETATALK #Appletalk communications protocols
573options NETATALKDEBUG #Appletalk debugging
574
575#
576# SMB/CIFS requester
577# NETSMB enables support for SMB protocol, it requires LIBMCHAIN and LIBICONV
578# options.
579options NETSMB #SMB/CIFS requester
580
581# mchain library. It can be either loaded as KLD or compiled into kernel
582options LIBMCHAIN
583
584# libalias library, performing NAT
585options LIBALIAS
586
587# flowtable cache
588options FLOWTABLE
589
590#
591# SCTP is a NEW transport protocol defined by
592# RFC2960 updated by RFC3309 and RFC3758.. and
593# soon to have a new base RFC and many many more
594# extensions. This release supports all the extensions
595# including many drafts (most about to become RFC's).
596# It is the reference implementation of SCTP
597# and is quite well tested.
598#
599# Note YOU MUST have both INET and INET6 defined.
600# You don't have to enable V6, but SCTP is
601# dual stacked and so far we have not torn apart
602# the V6 and V4.. since an association can span
603# both a V6 and V4 address at the SAME time :-)
604#
605options SCTP
606# There are bunches of options:
607# this one turns on all sorts of
608# nastly printing that you can
609# do. It's all controlled by a
610# bit mask (settable by socket opt and
611# by sysctl). Including will not cause
612# logging until you set the bits.. but it
613# can be quite verbose.. so without this
614# option we don't do any of the tests for
615# bits and prints.. which makes the code run
616# faster.. if you are not debugging don't use.
617options SCTP_DEBUG
618#
619# This option turns off the CRC32c checksum. Basically,
620# you will not be able to talk to anyone else who
621# has not done this. Its more for experimentation to
622# see how much CPU the CRC32c really takes. Most new
623# cards for TCP support checksum offload.. so this
624# option gives you a "view" into what SCTP would be
625# like with such an offload (which only exists in
626# high in iSCSI boards so far). With the new
627# splitting 8's algorithm its not as bad as it used
628# to be.. but it does speed things up try only
629# for in a captured lab environment :-)
630options SCTP_WITH_NO_CSUM
631#
632
633#
634# All that options after that turn on specific types of
635# logging. You can monitor CWND growth, flight size
636# and all sorts of things. Go look at the code and
637# see. I have used this to produce interesting
638# charts and graphs as well :->
639#
640# I have not yet committed the tools to get and print
641# the logs, I will do that eventually .. before then
642# if you want them send me an email rrs@freebsd.org
643# You basically must have ktr(4) enabled for these
644# and you then set the sysctl to turn on/off various
645# logging bits. Use ktrdump(8) to pull the log and run
646# it through a display program.. and graphs and other
647# things too.
648#
649options SCTP_LOCK_LOGGING
650options SCTP_MBUF_LOGGING
651options SCTP_MBCNT_LOGGING
652options SCTP_PACKET_LOGGING
653options SCTP_LTRACE_CHUNKS
654options SCTP_LTRACE_ERRORS
655
656
657# altq(9). Enable the base part of the hooks with the ALTQ option.
658# Individual disciplines must be built into the base system and can not be
659# loaded as modules at this point. ALTQ requires a stable TSC so if yours is
660# broken or changes with CPU throttling then you must also have the ALTQ_NOPCC
661# option.
662options ALTQ
663options ALTQ_CBQ # Class Based Queueing
664options ALTQ_RED # Random Early Detection
665options ALTQ_RIO # RED In/Out
666options ALTQ_HFSC # Hierarchical Packet Scheduler
667options ALTQ_CDNR # Traffic conditioner
668options ALTQ_PRIQ # Priority Queueing
669options ALTQ_NOPCC # Required if the TSC is unusable
670options ALTQ_DEBUG
671
672# netgraph(4). Enable the base netgraph code with the NETGRAPH option.
673# Individual node types can be enabled with the corresponding option
674# listed below; however, this is not strictly necessary as netgraph
675# will automatically load the corresponding KLD module if the node type
676# is not already compiled into the kernel. Each type below has a
677# corresponding man page, e.g., ng_async(8).
678options NETGRAPH # netgraph(4) system
679options NETGRAPH_DEBUG # enable extra debugging, this
680 # affects netgraph(4) and nodes
681# Node types
682options NETGRAPH_ASYNC
683options NETGRAPH_ATMLLC
684options NETGRAPH_ATM_ATMPIF
685options NETGRAPH_BLUETOOTH # ng_bluetooth(4)
686options NETGRAPH_BLUETOOTH_BT3C # ng_bt3c(4)
687options NETGRAPH_BLUETOOTH_HCI # ng_hci(4)
688options NETGRAPH_BLUETOOTH_L2CAP # ng_l2cap(4)
689options NETGRAPH_BLUETOOTH_SOCKET # ng_btsocket(4)
690options NETGRAPH_BLUETOOTH_UBT # ng_ubt(4)
691options NETGRAPH_BLUETOOTH_UBTBCMFW # ubtbcmfw(4)
692options NETGRAPH_BPF
693options NETGRAPH_BRIDGE
694options NETGRAPH_CAR
695options NETGRAPH_CISCO
696options NETGRAPH_DEFLATE
697options NETGRAPH_DEVICE
698options NETGRAPH_ECHO
699options NETGRAPH_EIFACE
700options NETGRAPH_ETHER
701options NETGRAPH_FEC
702options NETGRAPH_FRAME_RELAY
703options NETGRAPH_GIF
704options NETGRAPH_GIF_DEMUX
705options NETGRAPH_HOLE
706options NETGRAPH_IFACE
707options NETGRAPH_IP_INPUT
708options NETGRAPH_IPFW
709options NETGRAPH_KSOCKET
710options NETGRAPH_L2TP
711options NETGRAPH_LMI
712# MPPC compression requires proprietary files (not included)
713#options NETGRAPH_MPPC_COMPRESSION
714options NETGRAPH_MPPC_ENCRYPTION
715options NETGRAPH_NETFLOW
716options NETGRAPH_NAT
717options NETGRAPH_ONE2MANY
718options NETGRAPH_PATCH
719options NETGRAPH_PIPE
720options NETGRAPH_PPP
721options NETGRAPH_PPPOE
722options NETGRAPH_PPTPGRE
723options NETGRAPH_PRED1
724options NETGRAPH_RFC1490
725options NETGRAPH_SOCKET
726options NETGRAPH_SPLIT
727options NETGRAPH_SPPP
728options NETGRAPH_TAG
729options NETGRAPH_TCPMSS
730options NETGRAPH_TEE
731options NETGRAPH_UI
732options NETGRAPH_VJC
733options NETGRAPH_VLAN
734
735# NgATM - Netgraph ATM
736options NGATM_ATM
737options NGATM_ATMBASE
738options NGATM_SSCOP
739options NGATM_SSCFU
740options NGATM_UNI
741options NGATM_CCATM
742
743device mn # Munich32x/Falc54 Nx64kbit/sec cards.
744
745#
746# Network interfaces:
747# The `loop' device is MANDATORY when networking is enabled.
748device loop
749
750# The `ether' device provides generic code to handle
751# Ethernets; it is MANDATORY when an Ethernet device driver is
752# configured or token-ring is enabled.
753device ether
754
755# The `vlan' device implements the VLAN tagging of Ethernet frames
756# according to IEEE 802.1Q.
757device vlan
758
759# The `wlan' device provides generic code to support 802.11
760# drivers, including host AP mode; it is MANDATORY for the wi,
761# and ath drivers and will eventually be required by all 802.11 drivers.
762device wlan
763options IEEE80211_DEBUG #enable debugging msgs
764options IEEE80211_AMPDU_AGE #age frames in AMPDU reorder q's
765options IEEE80211_SUPPORT_MESH #enable 802.11s D3.0 support
766options IEEE80211_SUPPORT_TDMA #enable TDMA support
767
768# The `wlan_wep', `wlan_tkip', and `wlan_ccmp' devices provide
769# support for WEP, TKIP, and AES-CCMP crypto protocols optionally
770# used with 802.11 devices that depend on the `wlan' module.
771device wlan_wep
772device wlan_ccmp
773device wlan_tkip
774
775# The `wlan_xauth' device provides support for external (i.e. user-mode)
776# authenticators for use with 802.11 drivers that use the `wlan'
777# module and support 802.1x and/or WPA security protocols.
778device wlan_xauth
779
780# The `wlan_acl' device provides a MAC-based access control mechanism
781# for use with 802.11 drivers operating in ap mode and using the
782# `wlan' module.
783# The 'wlan_amrr' device provides AMRR transmit rate control algorithm
784device wlan_acl
785device wlan_amrr
786
787# Generic TokenRing
788device token
789
790# The `fddi' device provides generic code to support FDDI.
791device fddi
792
793# The `arcnet' device provides generic code to support Arcnet.
794device arcnet
795
796# The `sppp' device serves a similar role for certain types
797# of synchronous PPP links (like `cx', `ar').
798device sppp
799
800# The `bpf' device enables the Berkeley Packet Filter. Be
801# aware of the legal and administrative consequences of enabling this
802# option. DHCP requires bpf.
803device bpf
804
805# The `disc' device implements a minimal network interface,
806# which throws away all packets sent and never receives any. It is
807# included for testing and benchmarking purposes.
808device disc
809
810# The `epair' device implements a virtual back-to-back connected Ethernet
811# like interface pair.
812device epair
813
814# The `edsc' device implements a minimal Ethernet interface,
815# which discards all packets sent and receives none.
816device edsc
817
818# The `tap' device is a pty-like virtual Ethernet interface
819device tap
820
821# The `tun' device implements (user-)ppp and nos-tun(8)
822device tun
823
824# The `gif' device implements IPv6 over IP4 tunneling,
825# IPv4 over IPv6 tunneling, IPv4 over IPv4 tunneling and
826# IPv6 over IPv6 tunneling.
827# The `gre' device implements two types of IP4 over IP4 tunneling:
828# GRE and MOBILE, as specified in the RFC1701 and RFC2004.
829# The XBONEHACK option allows the same pair of addresses to be configured on
830# multiple gif interfaces.
831device gif
832device gre
833options XBONEHACK
834
835# The `faith' device captures packets sent to it and diverts them
836# to the IPv4/IPv6 translation daemon.
837# The `stf' device implements 6to4 encapsulation.
838device faith
839device stf
840
841# The `ef' device provides support for multiple ethernet frame types
842# specified via ETHER_* options. See ef(4) for details.
843device ef
844options ETHER_II # enable Ethernet_II frame
845options ETHER_8023 # enable Ethernet_802.3 (Novell) frame
846options ETHER_8022 # enable Ethernet_802.2 frame
847options ETHER_SNAP # enable Ethernet_802.2/SNAP frame
848
849# The pf packet filter consists of three devices:
850# The `pf' device provides /dev/pf and the firewall code itself.
851# The `pflog' device provides the pflog0 interface which logs packets.
852# The `pfsync' device provides the pfsync0 interface used for
853# synchronization of firewall state tables (over the net).
854device pf
855device pflog
856device pfsync
857
858# Bridge interface.
859device if_bridge
860
861# Common Address Redundancy Protocol. See carp(4) for more details.
862device carp
863
864# IPsec interface.
865device enc
866
867# Link aggregation interface.
868device lagg
869
870#
871# Internet family options:
872#
873# MROUTING enables the kernel multicast packet forwarder, which works
874# with mrouted and XORP.
875#
876# IPFIREWALL enables support for IP firewall construction, in
877# conjunction with the `ipfw' program. IPFIREWALL_VERBOSE sends
878# logged packets to the system logger. IPFIREWALL_VERBOSE_LIMIT
879# limits the number of times a matching entry can be logged.
880#
881# WARNING: IPFIREWALL defaults to a policy of "deny ip from any to any"
882# and if you do not add other rules during startup to allow access,
883# YOU WILL LOCK YOURSELF OUT. It is suggested that you set firewall_type=open
884# in /etc/rc.conf when first enabling this feature, then refining the
885# firewall rules in /etc/rc.firewall after you've tested that the new kernel
886# feature works properly.
887#
888# IPFIREWALL_DEFAULT_TO_ACCEPT causes the default rule (at boot) to
889# allow everything. Use with care, if a cracker can crash your
890# firewall machine, they can get to your protected machines. However,
891# if you are using it as an as-needed filter for specific problems as
892# they arise, then this may be for you. Changing the default to 'allow'
893# means that you won't get stuck if the kernel and /sbin/ipfw binary get
894# out of sync.
895#
896# IPDIVERT enables the divert IP sockets, used by ``ipfw divert''. It
897# depends on IPFIREWALL if compiled into the kernel.
898#
899# IPFIREWALL_FORWARD enables changing of the packet destination either
900# to do some sort of policy routing or transparent proxying. Used by
901# ``ipfw forward''. All redirections apply to locally generated
902# packets too. Because of this great care is required when
903# crafting the ruleset.
904#
905# IPFIREWALL_NAT adds support for in kernel nat in ipfw, and it requires
906# LIBALIAS.
907#
908# IPSTEALTH enables code to support stealth forwarding (i.e., forwarding
909# packets without touching the TTL). This can be useful to hide firewalls
910# from traceroute and similar tools.
911#
912# TCPDEBUG enables code which keeps traces of the TCP state machine
913# for sockets with the SO_DEBUG option set, which can then be examined
914# using the trpt(8) utility.
915#
916options MROUTING # Multicast routing
917options IPFIREWALL #firewall
918options IPFIREWALL_VERBOSE #enable logging to syslogd(8)
919options IPFIREWALL_VERBOSE_LIMIT=100 #limit verbosity
920options IPFIREWALL_DEFAULT_TO_ACCEPT #allow everything by default
921options IPFIREWALL_FORWARD #packet destination changes
922options IPFIREWALL_NAT #ipfw kernel nat support
923options IPDIVERT #divert sockets
924options IPFILTER #ipfilter support
925options IPFILTER_LOG #ipfilter logging
926options IPFILTER_LOOKUP #ipfilter pools
927options IPFILTER_DEFAULT_BLOCK #block all packets by default
928options IPSTEALTH #support for stealth forwarding
929options TCPDEBUG
930
931# The MBUF_STRESS_TEST option enables options which create
932# various random failures / extreme cases related to mbuf
933# functions. See mbuf(9) for a list of available test cases.
934# MBUF_PROFILING enables code to profile the mbuf chains
935# exiting the system (via participating interfaces) and
936# return a logarithmic histogram of monitored parameters
937# (e.g. packet size, wasted space, number of mbufs in chain).
938options MBUF_STRESS_TEST
939options MBUF_PROFILING
940
941# Statically link in accept filters
942options ACCEPT_FILTER_DATA
943options ACCEPT_FILTER_DNS
944options ACCEPT_FILTER_HTTP
945
946# TCP_SIGNATURE adds support for RFC 2385 (TCP-MD5) digests. These are
947# carried in TCP option 19. This option is commonly used to protect
948# TCP sessions (e.g. BGP) where IPSEC is not available nor desirable.
949# This is enabled on a per-socket basis using the TCP_MD5SIG socket option.
950# This requires the use of 'device crypto', 'options IPSEC'
951# or 'device cryptodev'.
952options TCP_SIGNATURE #include support for RFC 2385
953
954# DUMMYNET enables the "dummynet" bandwidth limiter. You need IPFIREWALL
955# as well. See dummynet(4) and ipfw(8) for more info. When you run
956# DUMMYNET it is advisable to also have at least "options HZ=1000" to achieve
957# a smooth scheduling of the traffic.
958options DUMMYNET
959
960# Zero copy sockets support. This enables "zero copy" for sending and
961# receiving data via a socket. The send side works for any type of NIC,
962# the receive side only works for NICs that support MTUs greater than the
963# page size of your architecture and that support header splitting. See
964# zero_copy(9) for more details.
965options ZERO_COPY_SOCKETS
966
967#####################################################################
968# FILESYSTEM OPTIONS
969
970#
971# Only the root, /usr, and /tmp filesystems need be statically
972# compiled; everything else will be automatically loaded at mount
973# time. (Exception: the UFS family--- FFS --- cannot
974# currently be demand-loaded.) Some people still prefer to statically
975# compile other filesystems as well.
976#
977# NB: The PORTAL filesystem is known to be buggy, and WILL panic your
978# system if you attempt to do anything with it. It is included here
979# as an incentive for some enterprising soul to sit down and fix it.
980# The UNION filesystem was known to be buggy in the past. It is now
981# being actively maintained, although there are still some issues being
982# resolved.
983#
984
985# One of these is mandatory:
986options FFS #Fast filesystem
987options NFSCLIENT #Network File System client
988
989# The rest are optional:
990options CD9660 #ISO 9660 filesystem
991options FDESCFS #File descriptor filesystem
992options HPFS #OS/2 File system
993options MSDOSFS #MS DOS File System (FAT, FAT32)
994options NFSSERVER #Network File System server
995options NFSLOCKD #Network Lock Manager
996options NFSCL #experimental NFS client with NFSv4
997options NFSD #experimental NFS server with NFSv4
998options KGSSAPI #Kernel GSSAPI implementation
999
1000# NT File System. Read-mostly, see mount_ntfs(8) for details.
1001# For a full read-write NTFS support consider sysutils/fusefs-ntfs
1002# port/package.
1003options NTFS
1004
1005options NULLFS #NULL filesystem
1006# Broken (depends on NCP):
1007#options NWFS #NetWare filesystem
1008options PORTALFS #Portal filesystem
1009options PROCFS #Process filesystem (requires PSEUDOFS)
1010options PSEUDOFS #Pseudo-filesystem framework
1011options PSEUDOFS_TRACE #Debugging support for PSEUDOFS
1012options SMBFS #SMB/CIFS filesystem
1013options TMPFS #Efficient memory filesystem
1014options UDF #Universal Disk Format
1015options UNIONFS #Union filesystem
1016# The xFS_ROOT options REQUIRE the associated ``options xFS''
1017options NFS_ROOT #NFS usable as root device
1018
1019# Soft updates is a technique for improving filesystem speed and
1020# making abrupt shutdown less risky.
1021#
1022options SOFTUPDATES
1023
1024# Extended attributes allow additional data to be associated with files,
1025# and is used for ACLs, Capabilities, and MAC labels.
1026# See src/sys/ufs/ufs/README.extattr for more information.
1027options UFS_EXTATTR
1028options UFS_EXTATTR_AUTOSTART
1029
1030# Access Control List support for UFS filesystems. The current ACL
1031# implementation requires extended attribute support, UFS_EXTATTR,
1032# for the underlying filesystem.
1033# See src/sys/ufs/ufs/README.acls for more information.
1034options UFS_ACL
1035
1036# Directory hashing improves the speed of operations on very large
1037# directories at the expense of some memory.
1038options UFS_DIRHASH
1039
1040# Gjournal-based UFS journaling support.
1041options UFS_GJOURNAL
1042
1043# Make space in the kernel for a root filesystem on a md device.
1044# Define to the number of kilobytes to reserve for the filesystem.
1045options MD_ROOT_SIZE=10
1046
1047# Make the md device a potential root device, either with preloaded
1048# images of type mfs_root or md_root.
1049options MD_ROOT
1050
1051# Disk quotas are supported when this option is enabled.
1052options QUOTA #enable disk quotas
1053
1054# If you are running a machine just as a fileserver for PC and MAC
1055# users, using SAMBA or Netatalk, you may consider setting this option
1056# and keeping all those users' directories on a filesystem that is
1057# mounted with the suiddir option. This gives new files the same
1058# ownership as the directory (similar to group). It's a security hole
1059# if you let these users run programs, so confine it to file-servers
1060# (but it'll save you lots of headaches in those cases). Root owned
1061# directories are exempt and X bits are cleared. The suid bit must be
1062# set on the directory as well; see chmod(1). PC owners can't see/set
1063# ownerships so they keep getting their toes trodden on. This saves
1064# you all the support calls as the filesystem it's used on will act as
1065# they expect: "It's my dir so it must be my file".
1066#
1067options SUIDDIR
1068
1069# NFS options:
1070options NFS_MINATTRTIMO=3 # VREG attrib cache timeout in sec
1071options NFS_MAXATTRTIMO=60
1072options NFS_MINDIRATTRTIMO=30 # VDIR attrib cache timeout in sec
1073options NFS_MAXDIRATTRTIMO=60
1074options NFS_GATHERDELAY=10 # Default write gather delay (msec)
1075options NFS_WDELAYHASHSIZ=16 # and with this
1076options NFS_DEBUG # Enable NFS Debugging
1077
1078# Coda stuff:
1079options CODA #CODA filesystem.
1080device vcoda #coda minicache <-> venus comm.
1081# Use the old Coda 5.x venus<->kernel interface instead of the new
1082# realms-aware 6.x protocol.
1083#options CODA_COMPAT_5
1084
1085#
1086# Add support for the EXT2FS filesystem of Linux fame. Be a bit
1087# careful with this - the ext2fs code has a tendency to lag behind
1088# changes and not be exercised very much, so mounting read/write could
1089# be dangerous (and even mounting read only could result in panics.)
1090#
1091options EXT2FS
1092
1093#
1094# Add support for the ReiserFS filesystem (used in Linux). Currently,
1095# this is limited to read-only access.
1096#
1097options REISERFS
1098
1099#
1100# Add support for the SGI XFS filesystem. Currently,
1101# this is limited to read-only access.
1102#
1103options XFS
1104
1105# Use real implementations of the aio_* system calls. There are numerous
1106# stability and security issues in the current aio code that make it
1107# unsuitable for inclusion on machines with untrusted local users.
1108options VFS_AIO
1109
1110# Cryptographically secure random number generator; /dev/random
1111device random
1112
1113# The system memory devices; /dev/mem, /dev/kmem
1114device mem
1115
1116# The kernel symbol table device; /dev/ksyms
1117device ksyms
1118
1119# Optional character code conversion support with LIBICONV.
1120# Each option requires their base file system and LIBICONV.
1121options CD9660_ICONV
1122options MSDOSFS_ICONV
1123options NTFS_ICONV
1124options UDF_ICONV
1125
1126
1127#####################################################################
1128# POSIX P1003.1B
1129
1130# Real time extensions added in the 1993 POSIX
1131# _KPOSIX_PRIORITY_SCHEDULING: Build in _POSIX_PRIORITY_SCHEDULING
1132
1133options _KPOSIX_PRIORITY_SCHEDULING
1134# p1003_1b_semaphores are very experimental,
1135# user should be ready to assist in debugging if problems arise.
1136options P1003_1B_SEMAPHORES
1137
1138# POSIX message queue
1139options P1003_1B_MQUEUE
1140
1141#####################################################################
1142# SECURITY POLICY PARAMETERS
1143
1144# Support for BSM audit
1145options AUDIT
1146
1147# Support for Mandatory Access Control (MAC):
1148options MAC
1149options MAC_BIBA
1150options MAC_BSDEXTENDED
1151options MAC_IFOFF
1152options MAC_LOMAC
1153options MAC_MLS
1154options MAC_NONE
1155options MAC_PARTITION
1156options MAC_PORTACL
1157options MAC_SEEOTHERUIDS
1158options MAC_STUB
1159options MAC_TEST
1160
1161# Support for Capsicum
1162options CAPABILITIES
1163
1164
1165#####################################################################
1166# CLOCK OPTIONS
1167
1168# The granularity of operation is controlled by the kernel option HZ whose
1169# default value (1000 on most architectures) means a granularity of 1ms
1170# (1s/HZ). Historically, the default was 100, but finer granularity is
1171# required for DUMMYNET and other systems on modern hardware. There are
1172# reasonable arguments that HZ should, in fact, be 100 still; consider,
1173# that reducing the granularity too much might cause excessive overhead in
1174# clock interrupt processing, potentially causing ticks to be missed and thus
1175# actually reducing the accuracy of operation.
1176
1177options HZ=100
1178
1179# Enable support for the kernel PLL to use an external PPS signal,
1180# under supervision of [x]ntpd(8)
1181# More info in ntpd documentation: http://www.eecis.udel.edu/~ntp
1182
1183options PPS_SYNC
1184
1185
1186#####################################################################
1187# SCSI DEVICES
1188
1189# SCSI DEVICE CONFIGURATION
1190
1191# The SCSI subsystem consists of the `base' SCSI code, a number of
1192# high-level SCSI device `type' drivers, and the low-level host-adapter
1193# device drivers. The host adapters are listed in the ISA and PCI
1194# device configuration sections below.
1195#
1196# It is possible to wire down your SCSI devices so that a given bus,
1197# target, and LUN always come on line as the same device unit. In
1198# earlier versions the unit numbers were assigned in the order that
1199# the devices were probed on the SCSI bus. This means that if you
1200# removed a disk drive, you may have had to rewrite your /etc/fstab
1201# file, and also that you had to be careful when adding a new disk
1202# as it may have been probed earlier and moved your device configuration
1203# around. (See also option GEOM_VOL for a different solution to this
1204# problem.)
1205
1206# This old behavior is maintained as the default behavior. The unit
1207# assignment begins with the first non-wired down unit for a device
1208# type. For example, if you wire a disk as "da3" then the first
1209# non-wired disk will be assigned da4.
1210
1211# The syntax for wiring down devices is:
1212
1213hint.scbus.0.at="ahc0"
1214hint.scbus.1.at="ahc1"
1215hint.scbus.1.bus="0"
1216hint.scbus.3.at="ahc2"
1217hint.scbus.3.bus="0"
1218hint.scbus.2.at="ahc2"
1219hint.scbus.2.bus="1"
1220hint.da.0.at="scbus0"
1221hint.da.0.target="0"
1222hint.da.0.unit="0"
1223hint.da.1.at="scbus3"
1224hint.da.1.target="1"
1225hint.da.2.at="scbus2"
1226hint.da.2.target="3"
1227hint.sa.1.at="scbus1"
1228hint.sa.1.target="6"
1229
1230# "units" (SCSI logical unit number) that are not specified are
1231# treated as if specified as LUN 0.
1232
1233# All SCSI devices allocate as many units as are required.
1234
1235# The ch driver drives SCSI Media Changer ("jukebox") devices.
1236#
1237# The da driver drives SCSI Direct Access ("disk") and Optical Media
1238# ("WORM") devices.
1239#
1240# The sa driver drives SCSI Sequential Access ("tape") devices.
1241#
1242# The cd driver drives SCSI Read Only Direct Access ("cd") devices.
1243#
1244# The ses driver drives SCSI Environment Services ("ses") and
1245# SAF-TE ("SCSI Accessible Fault-Tolerant Enclosure") devices.
1246#
1247# The pt driver drives SCSI Processor devices.
1248#
1249# The sg driver provides a passthrough API that is compatible with the
1250# Linux SG driver. It will work in conjunction with the COMPAT_LINUX
1251# option to run linux SG apps. It can also stand on its own and provide
1252# source level API compatiblity for porting apps to FreeBSD.
1253#
1254# Target Mode support is provided here but also requires that a SIM
1255# (SCSI Host Adapter Driver) provide support as well.
1256#
1257# The targ driver provides target mode support as a Processor type device.
1258# It exists to give the minimal context necessary to respond to Inquiry
1259# commands. There is a sample user application that shows how the rest
1260# of the command support might be done in /usr/share/examples/scsi_target.
1261#
1262# The targbh driver provides target mode support and exists to respond
1263# to incoming commands that do not otherwise have a logical unit assigned
1264# to them.
1265#
1266# The "unknown" device (uk? in pre-2.0.5) is now part of the base SCSI
1267# configuration as the "pass" driver.
1268
1269device scbus #base SCSI code
1270device ch #SCSI media changers
1271device da #SCSI direct access devices (aka disks)
1272device sa #SCSI tapes
1273device cd #SCSI CD-ROMs
1274device ses #SCSI Environmental Services (and SAF-TE)
1275device pt #SCSI processor
1276device targ #SCSI Target Mode Code
1277device targbh #SCSI Target Mode Blackhole Device
1278device pass #CAM passthrough driver
1279device sg #Linux SCSI passthrough
1280
1281# CAM OPTIONS:
1282# debugging options:
1283# -- NOTE -- If you specify one of the bus/target/lun options, you must
1284# specify them all!
1285# CAMDEBUG: When defined enables debugging macros
1286# CAM_DEBUG_BUS: Debug the given bus. Use -1 to debug all busses.
1287# CAM_DEBUG_TARGET: Debug the given target. Use -1 to debug all targets.
1288# CAM_DEBUG_LUN: Debug the given lun. Use -1 to debug all luns.
1289# CAM_DEBUG_FLAGS: OR together CAM_DEBUG_INFO, CAM_DEBUG_TRACE,
1290# CAM_DEBUG_SUBTRACE, and CAM_DEBUG_CDB
1291#
1292# CAM_MAX_HIGHPOWER: Maximum number of concurrent high power (start unit) cmds
1293# SCSI_NO_SENSE_STRINGS: When defined disables sense descriptions
1294# SCSI_NO_OP_STRINGS: When defined disables opcode descriptions
1295# SCSI_DELAY: The number of MILLISECONDS to freeze the SIM (scsi adapter)
1296# queue after a bus reset, and the number of milliseconds to
1297# freeze the device queue after a bus device reset. This
1298# can be changed at boot and runtime with the
1299# kern.cam.scsi_delay tunable/sysctl.
1300options CAMDEBUG
1301options CAM_DEBUG_BUS=-1
1302options CAM_DEBUG_TARGET=-1
1303options CAM_DEBUG_LUN=-1
1304options CAM_DEBUG_FLAGS=(CAM_DEBUG_INFO|CAM_DEBUG_TRACE|CAM_DEBUG_CDB)
1305options CAM_MAX_HIGHPOWER=4
1306options SCSI_NO_SENSE_STRINGS
1307options SCSI_NO_OP_STRINGS
1308options SCSI_DELAY=5000 # Be pessimistic about Joe SCSI device
1309
1310# Options for the CAM CDROM driver:
1311# CHANGER_MIN_BUSY_SECONDS: Guaranteed minimum time quantum for a changer LUN
1312# CHANGER_MAX_BUSY_SECONDS: Maximum time quantum per changer LUN, only
1313# enforced if there is I/O waiting for another LUN
1314# The compiled in defaults for these variables are 2 and 10 seconds,
1315# respectively.
1316#
1317# These can also be changed on the fly with the following sysctl variables:
1318# kern.cam.cd.changer.min_busy_seconds
1319# kern.cam.cd.changer.max_busy_seconds
1320#
1321options CHANGER_MIN_BUSY_SECONDS=2
1322options CHANGER_MAX_BUSY_SECONDS=10
1323
1324# Options for the CAM sequential access driver:
1325# SA_IO_TIMEOUT: Timeout for read/write/wfm operations, in minutes
1326# SA_SPACE_TIMEOUT: Timeout for space operations, in minutes
1327# SA_REWIND_TIMEOUT: Timeout for rewind operations, in minutes
1328# SA_ERASE_TIMEOUT: Timeout for erase operations, in minutes
1329# SA_1FM_AT_EOD: Default to model which only has a default one filemark at EOT.
1330options SA_IO_TIMEOUT=4
1331options SA_SPACE_TIMEOUT=60
1332options SA_REWIND_TIMEOUT=(2*60)
1333options SA_ERASE_TIMEOUT=(4*60)
1334options SA_1FM_AT_EOD
1335
1336# Optional timeout for the CAM processor target (pt) device
1337# This is specified in seconds. The default is 60 seconds.
1338options SCSI_PT_DEFAULT_TIMEOUT=60
1339
1340# Optional enable of doing SES passthrough on other devices (e.g., disks)
1341#
1342# Normally disabled because a lot of newer SCSI disks report themselves
1343# as having SES capabilities, but this can then clot up attempts to build
1344# a topology with the SES device that's on the box these drives are in....
1345options SES_ENABLE_PASSTHROUGH
1346
1347
1348#####################################################################
1349# MISCELLANEOUS DEVICES AND OPTIONS
1350
1351device pty #BSD-style compatibility pseudo ttys
1352device nmdm #back-to-back tty devices
1353device md #Memory/malloc disk
1354device snp #Snoop device - to look at pty/vty/etc..
1355device ccd #Concatenated disk driver
1356device firmware #firmware(9) support
1357
1358# Kernel side iconv library
1359options LIBICONV
1360
1361# Size of the kernel message buffer. Should be N * pagesize.
1362options MSGBUF_SIZE=40960
1363
1364
1365#####################################################################
1366# HARDWARE DEVICE CONFIGURATION
1367
1368# For ISA the required hints are listed.
1369# EISA, MCA, PCI, CardBus, SD/MMC and pccard are self identifying buses, so
1370# no hints are needed.
1371
1372#
1373# Mandatory devices:
1374#
1375
1376# These options are valid for other keyboard drivers as well.
1377options KBD_DISABLE_KEYMAP_LOAD # refuse to load a keymap
1378options KBD_INSTALL_CDEV # install a CDEV entry in /dev
1379
1380options FB_DEBUG # Frame buffer debugging
1381
1382device splash # Splash screen and screen saver support
1383
1384# Various screen savers.
1385device blank_saver
1386device daemon_saver
1387device dragon_saver
1388device fade_saver
1389device fire_saver
1390device green_saver
1391device logo_saver
1392device rain_saver
1393device snake_saver
1394device star_saver
1395device warp_saver
1396
1397# The syscons console driver (SCO color console compatible).
1398device sc
1399hint.sc.0.at="isa"
1400options MAXCONS=16 # number of virtual consoles
1401options SC_ALT_MOUSE_IMAGE # simplified mouse cursor in text mode
1402options SC_DFLT_FONT # compile font in
1403makeoptions SC_DFLT_FONT=cp850
1404options SC_DISABLE_KDBKEY # disable `debug' key
1405options SC_DISABLE_REBOOT # disable reboot key sequence
1406options SC_HISTORY_SIZE=200 # number of history buffer lines
1407options SC_MOUSE_CHAR=0x3 # char code for text mode mouse cursor
1408options SC_PIXEL_MODE # add support for the raster text mode
1409
1410# The following options will let you change the default colors of syscons.
1411options SC_NORM_ATTR=(FG_GREEN|BG_BLACK)
1412options SC_NORM_REV_ATTR=(FG_YELLOW|BG_GREEN)
1413options SC_KERNEL_CONS_ATTR=(FG_RED|BG_BLACK)
1414options SC_KERNEL_CONS_REV_ATTR=(FG_BLACK|BG_RED)
1415
1416# The following options will let you change the default behaviour of
1417# cut-n-paste feature
1418options SC_CUT_SPACES2TABS # convert leading spaces into tabs
1419options SC_CUT_SEPCHARS=\"x09\" # set of characters that delimit words
1420 # (default is single space - \"x20\")
1421
1422# If you have a two button mouse, you may want to add the following option
1423# to use the right button of the mouse to paste text.
1424options SC_TWOBUTTON_MOUSE
1425
1426# You can selectively disable features in syscons.
1427options SC_NO_CUTPASTE
1428options SC_NO_FONT_LOADING
1429options SC_NO_HISTORY
1430options SC_NO_MODE_CHANGE
1431options SC_NO_SYSMOUSE
1432options SC_NO_SUSPEND_VTYSWITCH
1433
1434# `flags' for sc
1435# 0x80 Put the video card in the VESA 800x600 dots, 16 color mode
1436# 0x100 Probe for a keyboard device periodically if one is not present
1437
1438# Enable experimental features of the syscons terminal emulator (teken).
1439options TEKEN_CONS25 # cons25-style terminal emulation
1440options TEKEN_UTF8 # UTF-8 output handling
1441
1442#
1443# Optional devices:
1444#
1445
1446#
1447# SCSI host adapters:
1448#
1449# adv: All Narrow SCSI bus AdvanSys controllers.
1450# adw: Second Generation AdvanSys controllers including the ADV940UW.
1451# aha: Adaptec 154x/1535/1640
1452# ahb: Adaptec 174x EISA controllers
1453# ahc: Adaptec 274x/284x/2910/293x/294x/394x/3950x/3960x/398X/4944/
1454# 19160x/29160x, aic7770/aic78xx
1455# ahd: Adaptec 29320/39320 Controllers.
1456# aic: Adaptec 6260/6360, APA-1460 (PC Card), NEC PC9801-100 (C-BUS)
1457# amd: Support for the AMD 53C974 SCSI host adapter chip as found on devices
1458# such as the Tekram DC-390(T).
1459# bt: Most Buslogic controllers: including BT-445, BT-54x, BT-64x, BT-74x,
1460# BT-75x, BT-946, BT-948, BT-956, BT-958, SDC3211B, SDC3211F, SDC3222F
1461# esp: NCR53c9x. Only for SBUS hardware right now.
1462# isp: Qlogic ISP 1020, 1040 and 1040B PCI SCSI host adapters,
1463# ISP 1240 Dual Ultra SCSI, ISP 1080 and 1280 (Dual) Ultra2,
1464# ISP 12160 Ultra3 SCSI,
1465# Qlogic ISP 2100 and ISP 2200 1Gb Fibre Channel host adapters.
1466# Qlogic ISP 2300 and ISP 2312 2Gb Fibre Channel host adapters.
1467# Qlogic ISP 2322 and ISP 6322 2Gb Fibre Channel host adapters.
1468# ispfw: Firmware module for Qlogic host adapters
1469# mpt: LSI-Logic MPT/Fusion 53c1020 or 53c1030 Ultra4
1470# or FC9x9 Fibre Channel host adapters.
1471# ncr: NCR 53C810, 53C825 self-contained SCSI host adapters.
1472# sym: Symbios/Logic 53C8XX family of PCI-SCSI I/O processors:
1473# 53C810, 53C810A, 53C815, 53C825, 53C825A, 53C860, 53C875,
1474# 53C876, 53C885, 53C895, 53C895A, 53C896, 53C897, 53C1510D,
1475# 53C1010-33, 53C1010-66.
1476# trm: Tekram DC395U/UW/F DC315U adapters.
1477# wds: WD7000
1478
1479#
1480# Note that the order is important in order for Buslogic ISA/EISA cards to be
1481# probed correctly.
1482#
1483device bt
1484hint.bt.0.at="isa"
1485hint.bt.0.port="0x330"
1486device adv
1487hint.adv.0.at="isa"
1488device adw
1489device aha
1490hint.aha.0.at="isa"
1491device aic
1492hint.aic.0.at="isa"
1493device ahb
1494device ahc
1495device ahd
1496device amd
1497device esp
1498device iscsi_initiator
1499device isp
1500hint.isp.0.disable="1"
1501hint.isp.0.role="3"
1502hint.isp.0.prefer_iomap="1"
1503hint.isp.0.prefer_memmap="1"
1504hint.isp.0.fwload_disable="1"
1505hint.isp.0.ignore_nvram="1"
1506hint.isp.0.fullduplex="1"
1507hint.isp.0.topology="lport"
1508hint.isp.0.topology="nport"
1509hint.isp.0.topology="lport-only"
1510hint.isp.0.topology="nport-only"
1511# we can't get u_int64_t types, nor can we get strings if it's got
1512# a leading 0x, hence this silly dodge.
1513hint.isp.0.portwnn="w50000000aaaa0000"
1514hint.isp.0.nodewnn="w50000000aaaa0001"
1515device ispfw
1516device mpt
1517device ncr
1518device sym
1519device trm
1520device wds
1521hint.wds.0.at="isa"
1522hint.wds.0.port="0x350"
1523hint.wds.0.irq="11"
1524hint.wds.0.drq="6"
1525
1526# The aic7xxx driver will attempt to use memory mapped I/O for all PCI
1527# controllers that have it configured only if this option is set. Unfortunately,
1528# this doesn't work on some motherboards, which prevents it from being the
1529# default.
1530options AHC_ALLOW_MEMIO
1531
1532# Dump the contents of the ahc controller configuration PROM.
1533options AHC_DUMP_EEPROM
1534
1535# Bitmap of units to enable targetmode operations.
1536options AHC_TMODE_ENABLE
1537
1538# Compile in Aic7xxx Debugging code.
1539options AHC_DEBUG
1540
1541# Aic7xxx driver debugging options. See sys/dev/aic7xxx/aic7xxx.h
1542options AHC_DEBUG_OPTS
1543
1544# Print register bitfields in debug output. Adds ~128k to driver
1545# See ahc(4).
1546options AHC_REG_PRETTY_PRINT
1547
1548# Compile in aic79xx debugging code.
1549options AHD_DEBUG
1550
1551# Aic79xx driver debugging options. Adds ~215k to driver. See ahd(4).
1552options AHD_DEBUG_OPTS=0xFFFFFFFF
1553
1554# Print human-readable register definitions when debugging
1555options AHD_REG_PRETTY_PRINT
1556
1557# Bitmap of units to enable targetmode operations.
1558options AHD_TMODE_ENABLE
1559
1560# The adw driver will attempt to use memory mapped I/O for all PCI
1561# controllers that have it configured only if this option is set.
1562options ADW_ALLOW_MEMIO
1563
1564# Options used in dev/iscsi (Software iSCSI stack)
1565#
1566options ISCSI_INITIATOR_DEBUG=9
1567
1568# Options used in dev/isp/ (Qlogic SCSI/FC driver).
1569#
1570# ISP_TARGET_MODE - enable target mode operation
1571#
1572options ISP_TARGET_MODE=1
1573#
1574# ISP_DEFAULT_ROLES - default role
1575# none=0
1576# target=1
1577# initiator=2
1578# both=3 (not supported currently)
1579#
1580# ISP_INTERNAL_TARGET (trivial internal disk target, for testing)
1581#
1582options ISP_DEFAULT_ROLES=2
1583
1584# Options used in dev/sym/ (Symbios SCSI driver).
1585#options SYM_SETUP_LP_PROBE_MAP #-Low Priority Probe Map (bits)
1586 # Allows the ncr to take precedence
1587 # 1 (1<<0) -> 810a, 860
1588 # 2 (1<<1) -> 825a, 875, 885, 895
1589 # 4 (1<<2) -> 895a, 896, 1510d
1590#options SYM_SETUP_SCSI_DIFF #-HVD support for 825a, 875, 885
1591 # disabled:0 (default), enabled:1
1592#options SYM_SETUP_PCI_PARITY #-PCI parity checking
1593 # disabled:0, enabled:1 (default)
1594#options SYM_SETUP_MAX_LUN #-Number of LUNs supported
1595 # default:8, range:[1..64]
1596
1597# The 'dpt' driver provides support for old DPT controllers (http://www.dpt.com/).
1598# These have hardware RAID-{0,1,5} support, and do multi-initiator I/O.
1599# The DPT controllers are commonly re-licensed under other brand-names -
1600# some controllers by Olivetti, Dec, HP, AT&T, SNI, AST, Alphatronic, NEC and
1601# Compaq are actually DPT controllers.
1602#
1603# See src/sys/dev/dpt for debugging and other subtle options.
1604# DPT_MEASURE_PERFORMANCE Enables a set of (semi)invasive metrics. Various
1605# instruments are enabled. The tools in
1606# /usr/sbin/dpt_* assume these to be enabled.
1607# DPT_HANDLE_TIMEOUTS Normally device timeouts are handled by the DPT.
1608# If you want the driver to handle timeouts, enable
1609# this option. If your system is very busy, this
1610# option will create more trouble than solve.
1611# DPT_TIMEOUT_FACTOR Used to compute the excessive amount of time to
1612# wait when timing out with the above option.
1613# DPT_DEBUG_xxxx These are controllable from sys/dev/dpt/dpt.h
1614# DPT_LOST_IRQ When enabled, will try, once per second, to catch
1615# any interrupt that got lost. Seems to help in some
1616# DPT-firmware/Motherboard combinations. Minimal
1617# cost, great benefit.
1618# DPT_RESET_HBA Make "reset" actually reset the controller
1619# instead of fudging it. Only enable this if you
1620# are 100% certain you need it.
1621
1622device dpt
1623
1624# DPT options
1625#!CAM# options DPT_MEASURE_PERFORMANCE
1626#!CAM# options DPT_HANDLE_TIMEOUTS
1627options DPT_TIMEOUT_FACTOR=4
1628options DPT_LOST_IRQ
1629options DPT_RESET_HBA
1630
1631#
1632# Compaq "CISS" RAID controllers (SmartRAID 5* series)
1633# These controllers have a SCSI-like interface, and require the
1634# CAM infrastructure.
1635#
1636device ciss
1637
1638#
1639# Intel Integrated RAID controllers.
1640# This driver was developed and is maintained by Intel. Contacts
1641# at Intel for this driver are
1642# "Kannanthanam, Boji T" <boji.t.kannanthanam@intel.com> and
1643# "Leubner, Achim" <achim.leubner@intel.com>.
1644#
1645device iir
1646
1647#
1648# Mylex AcceleRAID and eXtremeRAID controllers with v6 and later
1649# firmware. These controllers have a SCSI-like interface, and require
1650# the CAM infrastructure.
1651#
1652device mly
1653
1654#
1655# Compaq Smart RAID, Mylex DAC960 and AMI MegaRAID controllers. Only
1656# one entry is needed; the code will find and configure all supported
1657# controllers.
1658#
1659device ida # Compaq Smart RAID
1660device mlx # Mylex DAC960
1661device amr # AMI MegaRAID
1662device amrp # SCSI Passthrough interface (optional, CAM req.)
1663device mfi # LSI MegaRAID SAS
1664device mfip # LSI MegaRAID SAS passthrough, requires CAM
1665options MFI_DEBUG
1666
1667#
1668# 3ware ATA RAID
1669#
1670device twe # 3ware ATA RAID
1671
1672#
1673# Serial ATA host controllers:
1674#
1675# ahci: Advanced Host Controller Interface (AHCI) compatible
1676# mvs: Marvell 88SX50XX/88SX60XX/88SX70XX/SoC controllers
1677# siis: SiliconImage SiI3124/SiI3132/SiI3531 controllers
1678#
1679# These drivers are part of cam(4) subsystem. They supersede less featured
1680# ata(4) subsystem drivers, supporting same hardware.
1681
1682device ahci
1683device mvs
1684device siis
1685
1686#
1687# The 'ATA' driver supports all ATA and ATAPI devices, including PC Card
1688# devices. You only need one "device ata" for it to find all
1689# PCI and PC Card ATA/ATAPI devices on modern machines.
1690# Alternatively, individual bus and chipset drivers may be chosen by using
1691# the 'atacore' driver then selecting the drivers on a per vendor basis.
1692# For example to build a system which only supports a VIA chipset,
1693# omit 'ata' and include the 'atacore', 'atapci' and 'atavia' drivers.
1694device ata
1695device atadisk # ATA disk drives
1696device ataraid # ATA RAID drives
1697device atapicd # ATAPI CDROM drives
1698device atapifd # ATAPI floppy drives
1699device atapist # ATAPI tape drives
1700device atapicam # emulate ATAPI devices as SCSI ditto via CAM
1701 # needs CAM to be present (scbus & pass)
1702
1703# Modular ATA
1704#device atacore # Core ATA functionality
1705#device atacard # CARDBUS support
1706#device atabus # PC98 cbus support
1707#device ataisa # ISA bus support
1708#device atapci # PCI bus support; only generic chipset support
1709
1710# PCI ATA chipsets
1711#device ataahci # AHCI SATA
1712#device ataacard # ACARD
1713#device ataacerlabs # Acer Labs Inc. (ALI)
1714#device ataadaptec # Adaptec
1715#device ataamd # American Micro Devices (AMD)
1716#device ataati # ATI
1717#device atacenatek # Cenatek
1718#device atacypress # Cypress
1719#device atacyrix # Cyrix
1720#device atahighpoint # HighPoint
1721#device ataintel # Intel
1722#device ataite # Integrated Technology Inc. (ITE)
1723#device atajmicron # JMicron
1724#device atamarvell # Marvell
1725#device atamicron # Micron
1726#device atanational # National
1727#device atanetcell # NetCell
1728#device atanvidia # nVidia
1729#device atapromise # Promise
1730#device ataserverworks # ServerWorks
1731#device atasiliconimage # Silicon Image Inc. (SiI) (formerly CMD)
1732#device atasis # Silicon Integrated Systems Corp.(SiS)
1733#device atavia # VIA Technologies Inc.
1734
1735#
1736# For older non-PCI, non-PnPBIOS systems, these are the hints lines to add:
1737hint.ata.0.at="isa"
1738hint.ata.0.port="0x1f0"
1739hint.ata.0.irq="14"
1740hint.ata.1.at="isa"
1741hint.ata.1.port="0x170"
1742hint.ata.1.irq="15"
1743
1744#
1745# The following options are valid on the ATA driver:
1746#
1747# ATA_STATIC_ID: controller numbering is static ie depends on location
1748# else the device numbers are dynamically allocated.
1749# ATA_REQUEST_TIMEOUT: the number of seconds to wait for an ATA request
1750# before timing out.
1751# ATA_CAM: Turn ata(4) subsystem controller drivers into cam(4)
1752# interface modules. This deprecates all ata(4)
1753# peripheral device drivers (atadisk, ataraid, atapicd,
1754# atapifd, atapist, atapicam) and all user-level APIs.
1755# cam(4) drivers and APIs will be connected instead.
1756
1757options ATA_STATIC_ID
1758#options ATA_REQUEST_TIMEOUT=10
1759#options ATA_CAM
1760
1761#
1762# Standard floppy disk controllers and floppy tapes, supports
1763# the Y-E DATA External FDD (PC Card)
1764#
1765device fdc
1766hint.fdc.0.at="isa"
1767hint.fdc.0.port="0x3F0"
1768hint.fdc.0.irq="6"
1769hint.fdc.0.drq="2"
1770#
1771# FDC_DEBUG enables floppy debugging. Since the debug output is huge, you
1772# gotta turn it actually on by setting the variable fd_debug with DDB,
1773# however.
1774options FDC_DEBUG
1775#
1776# Activate this line if you happen to have an Insight floppy tape.
1777# Probing them proved to be dangerous for people with floppy disks only,
1778# so it's "hidden" behind a flag:
1779#hint.fdc.0.flags="1"
1780
1781# Specify floppy devices
1782hint.fd.0.at="fdc0"
1783hint.fd.0.drive="0"
1784hint.fd.1.at="fdc0"
1785hint.fd.1.drive="1"
1786
1787#
1788# uart: newbusified driver for serial interfaces. It consolidates the sio(4),
1789# sab(4) and zs(4) drivers.
1790#
1791device uart
1792
1793# Options for uart(4)
1794options UART_PPS_ON_CTS # Do time pulse capturing using CTS
1795 # instead of DCD.
1796
1797# The following hint should only be used for pure ISA devices. It is not
1798# needed otherwise. Use of hints is strongly discouraged.
1799hint.uart.0.at="isa"
1800
1801# The following 3 hints are used when the UART is a system device (i.e., a
1802# console or debug port), but only on platforms that don't have any other
1803# means to pass the information to the kernel. The unit number of the hint
1804# is only used to bundle the hints together. There is no relation to the
1805# unit number of the probed UART.
1806hint.uart.0.port="0x3f8"
1807hint.uart.0.flags="0x10"
1808hint.uart.0.baud="115200"
1809
1810# `flags' for serial drivers that support consoles like sio(4) and uart(4):
1811# 0x10 enable console support for this unit. Other console flags
1812# (if applicable) are ignored unless this is set. Enabling
1813# console support does not make the unit the preferred console.
1814# Boot with -h or set boot_serial=YES in the loader. For sio(4)
1815# specifically, the 0x20 flag can also be set (see above).
1816# Currently, at most one unit can have console support; the
1817# first one (in config file order) with this flag set is
1818# preferred. Setting this flag for sio0 gives the old behaviour.
1819# 0x80 use this port for serial line gdb support in ddb. Also known
1820# as debug port.
1821#
1822
1823# Options for serial drivers that support consoles:
1824options BREAK_TO_DEBUGGER # A BREAK on a serial console goes to
1825 # ddb, if available.
1826
1827# Solaris implements a new BREAK which is initiated by a character
1828# sequence CR ~ ^b which is similar to a familiar pattern used on
1829# Sun servers by the Remote Console. There are FreeBSD extensions:
1830# CR ~ ^p requests force panic and CR ~ ^r requests a clean reboot.
1831options ALT_BREAK_TO_DEBUGGER
1832
1833# Serial Communications Controller
1834# Supports the Siemens SAB 82532 and Zilog Z8530 multi-channel
1835# communications controllers.
1836device scc
1837
1838# PCI Universal Communications driver
1839# Supports various multi port PCI I/O cards.
1840device puc
1841
1842#
1843# Network interfaces:
1844#
1845# MII bus support is required for many PCI Ethernet NICs,
1846# namely those which use MII-compliant transceivers or implement
1847# transceiver control interfaces that operate like an MII. Adding
1848# "device miibus" to the kernel config pulls in support for
1849# the generic miibus API and all of the PHY drivers, including a
1850# generic one for PHYs that aren't specifically handled by an
1851# individual driver. Support for specific PHYs may be built by adding
1852# "device mii" then adding the appropriate PHY driver.
1853device miibus # MII support including all PHYs
1854device mii # Minimal MII support
1855
1856device acphy # Altima Communications AC101
1857device amphy # AMD AM79c873 / Davicom DM910{1,2}
1858device atphy # Attansic/Atheros F1
1859device axphy # Asix Semiconductor AX88x9x
1860device bmtphy # Broadcom BCM5201/BCM5202 and 3Com 3c905C
1861device brgphy # Broadcom BCM54xx/57xx 1000baseTX
1862device ciphy # Cicada/Vitesse CS/VSC8xxx
1863device e1000phy # Marvell 88E1000 1000/100/10-BT
1864device exphy # 3Com internal PHY
1865device gentbi # Generic 10-bit 1000BASE-{LX,SX} fiber ifaces
1866device icsphy # ICS ICS1889-1893
1867device inphy # Intel 82553/82555
1868device ip1000phy # IC Plus IP1000A/IP1001
1869device jmphy # JMicron JMP211/JMP202
1870device lxtphy # Level One LXT-970
1871device mlphy # Micro Linear 6692
1872device nsgphy # NatSemi DP8361/DP83865/DP83891
1873device nsphy # NatSemi DP83840A
1874device nsphyter # NatSemi DP83843/DP83815
1875device pnaphy # HomePNA
1876device qsphy # Quality Semiconductor QS6612
1877device rdcphy # RDC Semiconductor R6040
1878device rgephy # RealTek 8169S/8110S/8211B/8211C
1879device rlphy # RealTek 8139
1880device rlswitch # RealTek 8305
1881device ruephy # RealTek RTL8150
1882device smcphy # SMSC LAN91C111
1883device tdkphy # TDK 89Q2120
1884device tlphy # Texas Instruments ThunderLAN
1885device truephy # LSI TruePHY
1886device xmphy # XaQti XMAC II
1887
1888# an: Aironet 4500/4800 802.11 wireless adapters. Supports the PCMCIA,
1889# PCI and ISA varieties.
1890# ae: Support for gigabit ethernet adapters based on the Attansic/Atheros
1891# L2 PCI-Express FastEthernet controllers.
1892# age: Support for gigabit ethernet adapters based on the Attansic/Atheros
1893# L1 PCI express gigabit ethernet controllers.
1894# alc: Support for Atheros AR8131/AR8132 PCIe ethernet controllers.
1895# ale: Support for Atheros AR8121/AR8113/AR8114 PCIe ethernet controllers.
1896# ath: Atheros a/b/g WiFi adapters (requires ath_hal and wlan)
1897# bce: Broadcom NetXtreme II (BCM5706/BCM5708) PCI/PCIe Gigabit Ethernet
1898# adapters.
1899# bfe: Broadcom BCM4401 Ethernet adapter.
1900# bge: Support for gigabit ethernet adapters based on the Broadcom
1901# BCM570x family of controllers, including the 3Com 3c996-T,
1902# the Netgear GA302T, the SysKonnect SK-9D21 and SK-9D41, and
1903# the embedded gigE NICs on Dell PowerEdge 2550 servers.
1904# bxe: Broadcom NetXtreme II (BCM57710/57711/57711E) PCIe 10b Ethernet
1905# adapters.
1906# bwi: Broadcom BCM430* and BCM431* family of wireless adapters.
1907# bwn: Broadcom BCM43xx family of wireless adapters.
1908# cas: Sun Cassini/Cassini+ and National Semiconductor DP83065 Saturn
1909# cm: Arcnet SMC COM90c26 / SMC COM90c56
1910# (and SMC COM90c66 in '56 compatibility mode) adapters.
1911# cxgbe: Support for PCI express 10Gb/1Gb adapters based on the Chelsio T4
1912# (Terminator 4) ASIC.
1913# dc: Support for PCI fast ethernet adapters based on the DEC/Intel 21143
1914# and various workalikes including:
1915# the ADMtek AL981 Comet and AN985 Centaur, the ASIX Electronics
1916# AX88140A and AX88141, the Davicom DM9100 and DM9102, the Lite-On
1917# 82c168 and 82c169 PNIC, the Lite-On/Macronix LC82C115 PNIC II
1918# and the Macronix 98713/98713A/98715/98715A/98725 PMAC. This driver
1919# replaces the old al, ax, dm, pn and mx drivers. List of brands:
1920# Digital DE500-BA, Kingston KNE100TX, D-Link DFE-570TX, SOHOware SFA110,
1921# SVEC PN102-TX, CNet Pro110B, 120A, and 120B, Compex RL100-TX,
1922# LinkSys LNE100TX, LNE100TX V2.0, Jaton XpressNet, Alfa Inc GFC2204,
1923# KNE110TX.
1924# de: Digital Equipment DC21040
1925# em: Intel Pro/1000 Gigabit Ethernet 82542, 82543, 82544 based adapters.
1926# igb: Intel Pro/1000 PCI Express Gigabit Ethernet: 82575 and later adapters.
1927# ep: 3Com 3C509, 3C529, 3C556, 3C562D, 3C563D, 3C572, 3C574X, 3C579, 3C589
1928# and PC Card devices using these chipsets.
1929# ex: Intel EtherExpress Pro/10 and other i82595-based adapters,
1930# Olicom Ethernet PC Card devices.
1931# fe: Fujitsu MB86960A/MB86965A Ethernet
1932# fea: DEC DEFEA EISA FDDI adapter
1933# fpa: Support for the Digital DEFPA PCI FDDI. `device fddi' is also needed.
1934# fxp: Intel EtherExpress Pro/100B
1935# (hint of prefer_iomap can be done to prefer I/O instead of Mem mapping)
1936# gem: Apple GMAC/Sun ERI/Sun GEM
1937# hme: Sun HME (Happy Meal Ethernet)
1938# jme: JMicron JMC260 Fast Ethernet/JMC250 Gigabit Ethernet based adapters.
1939# le: AMD Am7900 LANCE and Am79C9xx PCnet
1940# lge: Support for PCI gigabit ethernet adapters based on the Level 1
1941# LXT1001 NetCellerator chipset. This includes the D-Link DGE-500SX,
1942# SMC TigerCard 1000 (SMC9462SX), and some Addtron cards.
1943# msk: Support for gigabit ethernet adapters based on the Marvell/SysKonnect
1944# Yukon II Gigabit controllers, including 88E8021, 88E8022, 88E8061,
1945# 88E8062, 88E8035, 88E8036, 88E8038, 88E8050, 88E8052, 88E8053,
1946# 88E8055, 88E8056 and D-Link 560T/550SX.
1947# lmc: Support for the LMC/SBE wide-area network interface cards.
1948# my: Myson Fast Ethernet (MTD80X, MTD89X)
1949# nge: Support for PCI gigabit ethernet adapters based on the National
1950# Semiconductor DP83820 and DP83821 chipset. This includes the
1951# SMC EZ Card 1000 (SMC9462TX), D-Link DGE-500T, Asante FriendlyNet
1952# GigaNIX 1000TA and 1000TPC, the Addtron AEG320T, the Surecom
1953# EP-320G-TX and the Netgear GA622T.
1954# pcn: Support for PCI fast ethernet adapters based on the AMD Am79c97x
1955# PCnet-FAST, PCnet-FAST+, PCnet-FAST III, PCnet-PRO and PCnet-Home
1956# chipsets. These can also be handled by the le(4) driver if the
1957# pcn(4) driver is left out of the kernel. The le(4) driver does not
1958# support the additional features like the MII bus and burst mode of
1959# the PCnet-FAST and greater chipsets though.
1960# ral: Ralink Technology IEEE 802.11 wireless adapter
1961# re: RealTek 8139C+/8169/816xS/811xS/8101E PCI/PCIe Ethernet adapter
1962# rl: Support for PCI fast ethernet adapters based on the RealTek 8129/8139
1963# chipset. Note that the RealTek driver defaults to using programmed
1964# I/O to do register accesses because memory mapped mode seems to cause
1965# severe lockups on SMP hardware. This driver also supports the
1966# Accton EN1207D `Cheetah' adapter, which uses a chip called
1967# the MPX 5030/5038, which is either a RealTek in disguise or a
1968# RealTek workalike. Note that the D-Link DFE-530TX+ uses the RealTek
1969# chipset and is supported by this driver, not the 'vr' driver.
1970# sf: Support for Adaptec Duralink PCI fast ethernet adapters based on the
1971# Adaptec AIC-6915 "starfire" controller.
1972# This includes dual and quad port cards, as well as one 100baseFX card.
1973# Most of these are 64-bit PCI devices, except for one single port
1974# card which is 32-bit.
1975# sge: Silicon Integrated Systems SiS190/191 Fast/Gigabit Ethernet adapter
1976# sis: Support for NICs based on the Silicon Integrated Systems SiS 900,
1977# SiS 7016 and NS DP83815 PCI fast ethernet controller chips.
1978# sk: Support for the SysKonnect SK-984x series PCI gigabit ethernet NICs.
1979# This includes the SK-9841 and SK-9842 single port cards (single mode
1980# and multimode fiber) and the SK-9843 and SK-9844 dual port cards
1981# (also single mode and multimode).
1982# The driver will autodetect the number of ports on the card and
1983# attach each one as a separate network interface.
1984# sn: Support for ISA and PC Card Ethernet devices using the
1985# SMC91C90/92/94/95 chips.
1986# ste: Sundance Technologies ST201 PCI fast ethernet controller, includes
1987# the D-Link DFE-550TX.
1988# stge: Support for gigabit ethernet adapters based on the Sundance/Tamarack
1989# TC9021 family of controllers, including the Sundance ST2021/ST2023,
1990# the Sundance/Tamarack TC9021, the D-Link DL-4000 and ASUS NX1101.
1991# ti: Support for PCI gigabit ethernet NICs based on the Alteon Networks
1992# Tigon 1 and Tigon 2 chipsets. This includes the Alteon AceNIC, the
1993# 3Com 3c985, the Netgear GA620 and various others. Note that you will
1994# probably want to bump up kern.ipc.nmbclusters a lot to use this driver.
1995# tl: Support for the Texas Instruments TNETE100 series 'ThunderLAN'
1996# cards and integrated ethernet controllers. This includes several
1997# Compaq Netelligent 10/100 cards and the built-in ethernet controllers
1998# in several Compaq Prosignia, Proliant and Deskpro systems. It also
1999# supports several Olicom 10Mbps and 10/100 boards.
2000# tx: SMC 9432 TX, BTX and FTX cards. (SMC EtherPower II series)
2001# txp: Support for 3Com 3cR990 cards with the "Typhoon" chipset
2002# vr: Support for various fast ethernet adapters based on the VIA
2003# Technologies VT3043 `Rhine I' and VT86C100A `Rhine II' chips,
2004# including the D-Link DFE520TX and D-Link DFE530TX (see 'rl' for
2005# DFE530TX+), the Hawking Technologies PN102TX, and the AOpen/Acer ALN-320.
2006# vte: DM&P Vortex86 RDC R6040 Fast Ethernet
2007# vx: 3Com 3C590 and 3C595
2008# wb: Support for fast ethernet adapters based on the Winbond W89C840F chip.
2009# Note: this is not the same as the Winbond W89C940F, which is a
2010# NE2000 clone.
2011# wi: Lucent WaveLAN/IEEE 802.11 PCMCIA adapters. Note: this supports both
2012# the PCMCIA and ISA cards: the ISA card is really a PCMCIA to ISA
2013# bridge with a PCMCIA adapter plugged into it.
2014# xe: Xircom/Intel EtherExpress Pro100/16 PC Card ethernet controller,
2015# Accton Fast EtherCard-16, Compaq Netelligent 10/100 PC Card,
2016# Toshiba 10/100 Ethernet PC Card, Xircom 16-bit Ethernet + Modem 56
2017# xl: Support for the 3Com 3c900, 3c905, 3c905B and 3c905C (Fast)
2018# Etherlink XL cards and integrated controllers. This includes the
2019# integrated 3c905B-TX chips in certain Dell Optiplex and Dell
2020# Precision desktop machines and the integrated 3c905-TX chips
2021# in Dell Latitude laptop docking stations.
2022# Also supported: 3Com 3c980(C)-TX, 3Com 3cSOHO100-TX, 3Com 3c450-TX
2023
2024# Order for ISA/EISA devices is important here
2025
2026device cm
2027hint.cm.0.at="isa"
2028hint.cm.0.port="0x2e0"
2029hint.cm.0.irq="9"
2030hint.cm.0.maddr="0xdc000"
2031device ep
2032device ex
2033device fe
2034hint.fe.0.at="isa"
2035hint.fe.0.port="0x300"
2036device fea
2037device sn
2038hint.sn.0.at="isa"
2039hint.sn.0.port="0x300"
2040hint.sn.0.irq="10"
2041device an
2042device wi
2043device xe
2044
2045# PCI Ethernet NICs that use the common MII bus controller code.
2046device ae # Attansic/Atheros L2 FastEthernet
2047device age # Attansic/Atheros L1 Gigabit Ethernet
2048device alc # Atheros AR8131/AR8132 Ethernet
2049device ale # Atheros AR8121/AR8113/AR8114 Ethernet
2050device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet
2051device bfe # Broadcom BCM440x 10/100 Ethernet
2052device bge # Broadcom BCM570xx Gigabit Ethernet
2053device cas # Sun Cassini/Cassini+ and NS DP83065 Saturn
2054device cxgb # Chelsio T3 10 Gigabit Ethernet
2055device cxgb_t3fw # Chelsio T3 10 Gigabit Ethernet firmware
2056device dc # DEC/Intel 21143 and various workalikes
2057device et # Agere ET1310 10/100/Gigabit Ethernet
2058device fxp # Intel EtherExpress PRO/100B (82557, 82558)
2059hint.fxp.0.prefer_iomap="0"
2060device gem # Apple GMAC/Sun ERI/Sun GEM
2061device hme # Sun HME (Happy Meal Ethernet)
2062device jme # JMicron JMC250 Gigabit/JMC260 Fast Ethernet
2063device lge # Level 1 LXT1001 gigabit Ethernet
2064device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
2065device my # Myson Fast Ethernet (MTD80X, MTD89X)
2066device nge # NatSemi DP83820 gigabit Ethernet
2067device re # RealTek 8139C+/8169/8169S/8110S
2068device rl # RealTek 8129/8139
2069device pcn # AMD Am79C97x PCI 10/100 NICs
2070device sf # Adaptec AIC-6915 (``Starfire'')
2071device sge # Silicon Integrated Systems SiS190/191
2072device sis # Silicon Integrated Systems SiS 900/SiS 7016
2073device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
2074device ste # Sundance ST201 (D-Link DFE-550TX)
2075device stge # Sundance/Tamarack TC9021 gigabit Ethernet
2076device tl # Texas Instruments ThunderLAN
2077device tx # SMC EtherPower II (83c170 ``EPIC'')
2078device vr # VIA Rhine, Rhine II
2079device vte # DM&P Vortex86 RDC R6040 Fast Ethernet
2080device wb # Winbond W89C840F
2081device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
2082
2083# PCI Ethernet NICs.
2084device bxe # Broadcom BCM57710/BCM57711/BCM57711E 10Gb Ethernet
2085device cxgbe # Chelsio T4 10GbE PCIe adapter
2086device de # DEC/Intel DC21x4x (``Tulip'')
2087device em # Intel Pro/1000 Gigabit Ethernet
2088device igb # Intel Pro/1000 PCIE Gigabit Ethernet
2089device ixgb # Intel Pro/10Gbe PCI-X Ethernet
2090device ixgbe # Intel Pro/10Gbe PCIE Ethernet
2091device le # AMD Am7900 LANCE and Am79C9xx PCnet
2092device mxge # Myricom Myri-10G 10GbE NIC
2093device nxge # Neterion Xframe 10GbE Server/Storage Adapter
2094device ti # Alteon Networks Tigon I/II gigabit Ethernet
2095device txp # 3Com 3cR990 (``Typhoon'')
2096device vx # 3Com 3c590, 3c595 (``Vortex'')
2097
2098# PCI FDDI NICs.
2099device fpa
2100
2101# PCI WAN adapters.
2102device lmc
2103
2104# PCI IEEE 802.11 Wireless NICs
2105device ath # Atheros pci/cardbus NIC's
2106device ath_hal # pci/cardbus chip support
2107#device ath_ar5210 # AR5210 chips
2108#device ath_ar5211 # AR5211 chips
2109#device ath_ar5212 # AR5212 chips
2110#device ath_rf2413
2111#device ath_rf2417
2112#device ath_rf2425
2113#device ath_rf5111
2114#device ath_rf5112
2115#device ath_rf5413
2116#device ath_ar5416 # AR5416 chips
2117options AH_SUPPORT_AR5416 # enable AR5416 tx/rx descriptors
2118# All of the AR5212 parts have a problem when paired with the AR71xx
2119# CPUS. These parts have a bug that triggers a fatal bus error on the AR71xx
2120# only. Details of the exact nature of the bug are sketchy, but some can be
2121# found at https://forum.openwrt.org/viewtopic.php?pid=70060 on pages 4, 5 and
2122# 6. This option enables this workaround. There is a performance penalty
2123# for this work around, but without it things don't work at all. The DMA
2124# from the card usually bursts 128 bytes, but on the affected CPUs, only
2125# 4 are safe.
2126options AH_RXCFG_SDMAMW_4BYTES
2127#device ath_ar9160 # AR9160 chips
2128#device ath_ar9280 # AR9280 chips
2129#device ath_ar9285 # AR9285 chips
2130device ath_rate_sample # SampleRate tx rate control for ath
2131device bwi # Broadcom BCM430* BCM431*
2132device bwn # Broadcom BCM43xx
2133device ral # Ralink Technology RT2500 wireless NICs.
2134
2135# Use "private" jumbo buffers allocated exclusively for the ti(4) driver.
2136# This option is incompatible with the TI_JUMBO_HDRSPLIT option below.
2137#options TI_PRIVATE_JUMBOS
2138# Turn on the header splitting option for the ti(4) driver firmware. This
2139# only works for Tigon II chips, and has no effect for Tigon I chips.
2140options TI_JUMBO_HDRSPLIT
2141
2142#
2143# Use header splitting feature on bce(4) adapters.
2144# This may help to reduce the amount of jumbo-sized memory buffers used.
2145#
2146options BCE_JUMBO_HDRSPLIT
2147
2148# These two options allow manipulating the mbuf cluster size and mbuf size,
2149# respectively. Be very careful with NIC driver modules when changing
2150# these from their default values, because that can potentially cause a
2151# mismatch between the mbuf size assumed by the kernel and the mbuf size
2152# assumed by a module. The only driver that currently has the ability to
2153# detect a mismatch is ti(4).
2154options MCLSHIFT=12 # mbuf cluster shift in bits, 12 == 4KB
2155options MSIZE=512 # mbuf size in bytes
2156
2157#
2158# ATM related options (Cranor version)
2159# (note: this driver cannot be used with the HARP ATM stack)
2160#
2161# The `en' device provides support for Efficient Networks (ENI)
2162# ENI-155 PCI midway cards, and the Adaptec 155Mbps PCI ATM cards (ANA-59x0).
2163#
2164# The `hatm' device provides support for Fore/Marconi HE155 and HE622
2165# ATM PCI cards.
2166#
2167# The `fatm' device provides support for Fore PCA200E ATM PCI cards.
2168#
2169# The `patm' device provides support for IDT77252 based cards like
2170# ProSum's ProATM-155 and ProATM-25 and IDT's evaluation boards.
2171#
2172# atm device provides generic atm functions and is required for
2173# atm devices.
2174# NATM enables the netnatm protocol family that can be used to
2175# bypass TCP/IP.
2176#
2177# utopia provides the access to the ATM PHY chips and is required for en,
2178# hatm and fatm.
2179#
2180# the current driver supports only PVC operations (no atm-arp, no multicast).
2181# for more details, please read the original documents at
2182# http://www.ccrc.wustl.edu/pub/chuck/tech/bsdatm/bsdatm.html
2183#
2184device atm
2185device en
2186device fatm #Fore PCA200E
2187device hatm #Fore/Marconi HE155/622
2188device patm #IDT77252 cards (ProATM and IDT)
2189device utopia #ATM PHY driver
2190options NATM #native ATM
2191
2192options LIBMBPOOL #needed by patm, iatm
2193
2194#
2195# Sound drivers
2196#
2197# sound: The generic sound driver.
2198#
2199
2200device sound
2201
2202#
2203# snd_*: Device-specific drivers.
2204#
2205# The flags of the device tell the device a bit more info about the
2206# device that normally is obtained through the PnP interface.
2207# bit 2..0 secondary DMA channel;
2208# bit 4 set if the board uses two dma channels;
2209# bit 15..8 board type, overrides autodetection; leave it
2210# zero if don't know what to put in (and you don't,
2211# since this is unsupported at the moment...).
2212#
2213# snd_ad1816: Analog Devices AD1816 ISA PnP/non-PnP.
2214# snd_als4000: Avance Logic ALS4000 PCI.
2215# snd_atiixp: ATI IXP 200/300/400 PCI.
2216# snd_audiocs: Crystal Semiconductor CS4231 SBus/EBus. Only
2217# for sparc64.
2218# snd_cmi: CMedia CMI8338/CMI8738 PCI.
2219# snd_cs4281: Crystal Semiconductor CS4281 PCI.
2220# snd_csa: Crystal Semiconductor CS461x/428x PCI. (except
2221# 4281)
2222# snd_ds1: Yamaha DS-1 PCI.
2223# snd_emu10k1: Creative EMU10K1 PCI and EMU10K2 (Audigy) PCI.
2224# snd_emu10kx: Creative SoundBlaster Live! and Audigy
2225# snd_envy24: VIA Envy24 and compatible, needs snd_spicds.
2226# snd_envy24ht: VIA Envy24HT and compatible, needs snd_spicds.
2227# snd_es137x: Ensoniq AudioPCI ES137x PCI.
2228# snd_ess: Ensoniq ESS ISA PnP/non-PnP, to be used in
2229# conjunction with snd_sbc.
2230# snd_fm801: Forte Media FM801 PCI.
2231# snd_gusc: Gravis UltraSound ISA PnP/non-PnP.
2232# snd_hda: Intel High Definition Audio (Controller) and
2233# compatible.
2234# snd_ich: Intel ICH AC'97 and some more audio controllers
2235# embedded in a chipset, for example nVidia
2236# nForce controllers.
2237# snd_maestro: ESS Technology Maestro-1/2x PCI.
2238# snd_maestro3: ESS Technology Maestro-3/Allegro PCI.
2239# snd_mss: Microsoft Sound System ISA PnP/non-PnP.
2240# snd_neomagic: Neomagic 256 AV/ZX PCI.
2241# snd_sb16: Creative SoundBlaster16, to be used in
2242# conjunction with snd_sbc.
2243# snd_sb8: Creative SoundBlaster (pre-16), to be used in
2244# conjunction with snd_sbc.
2245# snd_sbc: Creative SoundBlaster ISA PnP/non-PnP.
2246# Supports ESS and Avance ISA chips as well.
2247# snd_spicds: SPI codec driver, needed by Envy24/Envy24HT drivers.
2248# snd_solo: ESS Solo-1x PCI.
2249# snd_t4dwave: Trident 4DWave DX/NX PCI, Sis 7018 PCI and Acer Labs
2250# M5451 PCI.
2251# snd_via8233: VIA VT8233x PCI.
2252# snd_via82c686: VIA VT82C686A PCI.
2253# snd_vibes: S3 Sonicvibes PCI.
2254# snd_uaudio: USB audio.
2255
2256device snd_ad1816
2257device snd_als4000
2258device snd_atiixp
2259#device snd_audiocs
2260device snd_cmi
2261device snd_cs4281
2262device snd_csa
2263device snd_ds1
2264device snd_emu10k1
2265device snd_emu10kx
2266device snd_envy24
2267device snd_envy24ht
2268device snd_es137x
2269device snd_ess
2270device snd_fm801
2271device snd_gusc
2272device snd_hda
2273device snd_ich
2274device snd_maestro
2275device snd_maestro3
2276device snd_mss
2277device snd_neomagic
2278device snd_sb16
2279device snd_sb8
2280device snd_sbc
2281device snd_solo
2282device snd_spicds
2283device snd_t4dwave
2284device snd_via8233
2285device snd_via82c686
2286device snd_vibes
2287device snd_uaudio
2288
2289# For non-PnP sound cards:
2290hint.pcm.0.at="isa"
2291hint.pcm.0.irq="10"
2292hint.pcm.0.drq="1"
2293hint.pcm.0.flags="0x0"
2294hint.sbc.0.at="isa"
2295hint.sbc.0.port="0x220"
2296hint.sbc.0.irq="5"
2297hint.sbc.0.drq="1"
2298hint.sbc.0.flags="0x15"
2299hint.gusc.0.at="isa"
2300hint.gusc.0.port="0x220"
2301hint.gusc.0.irq="5"
2302hint.gusc.0.drq="1"
2303hint.gusc.0.flags="0x13"
2304
2305#
2306# Following options are intended for debugging/testing purposes:
2307#
2308# SND_DEBUG Enable extra debugging code that includes
2309# sanity checking and possible increase of
2310# verbosity.
2311#
2312# SND_DIAGNOSTIC Simmilar in a spirit of INVARIANTS/DIAGNOSTIC,
2313# zero tolerance against inconsistencies.
2314#
2315# SND_FEEDER_MULTIFORMAT By default, only 16/32 bit feeders are compiled
2316# in. This options enable most feeder converters
2317# except for 8bit. WARNING: May bloat the kernel.
2318#
2319# SND_FEEDER_FULL_MULTIFORMAT Ditto, but includes 8bit feeders as well.
2320#
2321# SND_FEEDER_RATE_HP (feeder_rate) High precision 64bit arithmetic
2322# as much as possible (the default trying to
2323# avoid it). Possible slowdown.
2324#
2325# SND_PCM_64 (Only applicable for i386/32bit arch)
2326# Process 32bit samples through 64bit
2327# integer/arithmetic. Slight increase of dynamic
2328# range at a cost of possible slowdown.
2329#
2330# SND_OLDSTEREO Only 2 channels are allowed, effectively
2331# disabling multichannel processing.
2332#
2333options SND_DEBUG
2334options SND_DIAGNOSTIC
2335options SND_FEEDER_MULTIFORMAT
2336options SND_FEEDER_FULL_MULTIFORMAT
2337options SND_FEEDER_RATE_HP
2338options SND_PCM_64
2339options SND_OLDSTEREO
2340
2341#
2342# IEEE-488 hardware:
2343# pcii: PCIIA cards (uPD7210 based isa cards)
2344# tnt4882: National Instruments PCI-GPIB card.
2345
2346device pcii
2347hint.pcii.0.at="isa"
2348hint.pcii.0.port="0x2e1"
2349hint.pcii.0.irq="5"
2350hint.pcii.0.drq="1"
2351
2352device tnt4882
2353
2354#
2355# Miscellaneous hardware:
2356#
2357# scd: Sony CD-ROM using proprietary (non-ATAPI) interface
2358# mcd: Mitsumi CD-ROM using proprietary (non-ATAPI) interface
2359# bktr: Brooktree bt848/848a/849a/878/879 video capture and TV Tuner board
2360# joy: joystick (including IO DATA PCJOY PC Card joystick)
2361# cmx: OmniKey CardMan 4040 pccard smartcard reader
2362
2363# Mitsumi CD-ROM
2364device mcd
2365hint.mcd.0.at="isa"
2366hint.mcd.0.port="0x300"
2367# for the Sony CDU31/33A CDROM
2368device scd
2369hint.scd.0.at="isa"
2370hint.scd.0.port="0x230"
2371device joy # PnP aware, hints for non-PnP only
2372hint.joy.0.at="isa"
2373hint.joy.0.port="0x201"
2374device cmx
2375
2376#
2377# The 'bktr' device is a PCI video capture device using the Brooktree
2378# bt848/bt848a/bt849a/bt878/bt879 chipset. When used with a TV Tuner it forms a
2379# TV card, e.g. Miro PC/TV, Hauppauge WinCast/TV WinTV, VideoLogic Captivator,
2380# Intel Smart Video III, AverMedia, IMS Turbo, FlyVideo.
2381#
2382# options OVERRIDE_CARD=xxx
2383# options OVERRIDE_TUNER=xxx
2384# options OVERRIDE_MSP=1
2385# options OVERRIDE_DBX=1
2386# These options can be used to override the auto detection
2387# The current values for xxx are found in src/sys/dev/bktr/bktr_card.h
2388# Using sysctl(8) run-time overrides on a per-card basis can be made
2389#
2390# options BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_PAL
2391# or
2392# options BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_NTSC
2393# Specifies the default video capture mode.
2394# This is required for Dual Crystal (28&35Mhz) boards where PAL is used
2395# to prevent hangs during initialisation, e.g. VideoLogic Captivator PCI.
2396#
2397# options BKTR_USE_PLL
2398# This is required for PAL or SECAM boards with a 28Mhz crystal and no 35Mhz
2399# crystal, e.g. some new Bt878 cards.
2400#
2401# options BKTR_GPIO_ACCESS
2402# This enables IOCTLs which give user level access to the GPIO port.
2403#
2404# options BKTR_NO_MSP_RESET
2405# Prevents the MSP34xx reset. Good if you initialise the MSP in another OS first
2406#
2407# options BKTR_430_FX_MODE
2408# Switch Bt878/879 cards into Intel 430FX chipset compatibility mode.
2409#
2410# options BKTR_SIS_VIA_MODE
2411# Switch Bt878/879 cards into SIS/VIA chipset compatibility mode which is
2412# needed for some old SiS and VIA chipset motherboards.
2413# This also allows Bt878/879 chips to work on old OPTi (<1997) chipset
2414# motherboards and motherboards with bad or incomplete PCI 2.1 support.
2415# As a rough guess, old = before 1998
2416#
2417# options BKTR_NEW_MSP34XX_DRIVER
2418# Use new, more complete initialization scheme for the msp34* soundchip.
2419# Should fix stereo autodetection if the old driver does only output
2420# mono sound.
2421
2422#
2423# options BKTR_USE_FREEBSD_SMBUS
2424# Compile with FreeBSD SMBus implementation
2425#
2426# Brooktree driver has been ported to the new I2C framework. Thus,
2427# you'll need to have the following 3 lines in the kernel config.
2428# device smbus
2429# device iicbus
2430# device iicbb
2431# device iicsmb
2432# The iic and smb devices are only needed if you want to control other
2433# I2C slaves connected to the external connector of some cards.
2434#
2435device bktr
2436
2437#
2438# PC Card/PCMCIA and Cardbus
2439#
2440# cbb: pci/cardbus bridge implementing YENTA interface
2441# pccard: pccard slots
2442# cardbus: cardbus slots
2443device cbb
2444device pccard
2445device cardbus
2446
2447#
2448# MMC/SD
2449#
2450# mmc MMC/SD bus
2451# mmcsd MMC/SD memory card
2452# sdhci Generic PCI SD Host Controller
2453#
2454device mmc
2455device mmcsd
2456device sdhci
2457
2458#
2459# SMB bus
2460#
2461# System Management Bus support is provided by the 'smbus' device.
2462# Access to the SMBus device is via the 'smb' device (/dev/smb*),
2463# which is a child of the 'smbus' device.
2464#
2465# Supported devices:
2466# smb standard I/O through /dev/smb*
2467#
2468# Supported SMB interfaces:
2469# iicsmb I2C to SMB bridge with any iicbus interface
2470# bktr brooktree848 I2C hardware interface
2471# intpm Intel PIIX4 (82371AB, 82443MX) Power Management Unit
2472# alpm Acer Aladdin-IV/V/Pro2 Power Management Unit
2473# ichsmb Intel ICH SMBus controller chips (82801AA, 82801AB, 82801BA)
2474# viapm VIA VT82C586B/596B/686A and VT8233 Power Management Unit
2475# amdpm AMD 756 Power Management Unit
2476# amdsmb AMD 8111 SMBus 2.0 Controller
2477# nfpm NVIDIA nForce Power Management Unit
2478# nfsmb NVIDIA nForce2/3/4 MCP SMBus 2.0 Controller
2479#
2480device smbus # Bus support, required for smb below.
2481
2482device intpm
2483device alpm
2484device ichsmb
2485device viapm
2486device amdpm
2487device amdsmb
2488device nfpm
2489device nfsmb
2490
2491device smb
2492
2493#
2494# I2C Bus
2495#
2496# Philips i2c bus support is provided by the `iicbus' device.
2497#
2498# Supported devices:
2499# ic i2c network interface
2500# iic i2c standard io
2501# iicsmb i2c to smb bridge. Allow i2c i/o with smb commands.
2502#
2503# Supported interfaces:
2504# bktr brooktree848 I2C software interface
2505#
2506# Other:
2507# iicbb generic I2C bit-banging code (needed by lpbb, bktr)
2508#
2509device iicbus # Bus support, required for ic/iic/iicsmb below.
2510device iicbb
2511
2512device ic
2513device iic
2514device iicsmb # smb over i2c bridge
2515
2516# I2C peripheral devices
2517#
2518# ds133x Dallas Semiconductor DS1337, DS1338 and DS1339 RTC
2519# ds1672 Dallas Semiconductor DS1672 RTC
2520#
2521device ds133x
2522device ds1672
2523
2524# Parallel-Port Bus
2525#
2526# Parallel port bus support is provided by the `ppbus' device.
2527# Multiple devices may be attached to the parallel port, devices
2528# are automatically probed and attached when found.
2529#
2530# Supported devices:
2531# vpo Iomega Zip Drive
2532# Requires SCSI disk support ('scbus' and 'da'), best
2533# performance is achieved with ports in EPP 1.9 mode.
2534# lpt Parallel Printer
2535# plip Parallel network interface
2536# ppi General-purpose I/O ("Geek Port") + IEEE1284 I/O
2537# pps Pulse per second Timing Interface
2538# lpbb Philips official parallel port I2C bit-banging interface
2539# pcfclock Parallel port clock driver.
2540#
2541# Supported interfaces:
2542# ppc ISA-bus parallel port interfaces.
2543#
2544
2545options PPC_PROBE_CHIPSET # Enable chipset specific detection
2546 # (see flags in ppc(4))
2547options DEBUG_1284 # IEEE1284 signaling protocol debug
2548options PERIPH_1284 # Makes your computer act as an IEEE1284
2549 # compliant peripheral
2550options DONTPROBE_1284 # Avoid boot detection of PnP parallel devices
2551options VP0_DEBUG # ZIP/ZIP+ debug
2552options LPT_DEBUG # Printer driver debug
2553options PPC_DEBUG # Parallel chipset level debug
2554options PLIP_DEBUG # Parallel network IP interface debug
2555options PCFCLOCK_VERBOSE # Verbose pcfclock driver
2556options PCFCLOCK_MAX_RETRIES=5 # Maximum read tries (default 10)
2557
2558device ppc
2559hint.ppc.0.at="isa"
2560hint.ppc.0.irq="7"
2561device ppbus
2562device vpo
2563device lpt
2564device plip
2565device ppi
2566device pps
2567device lpbb
2568device pcfclock
2569
2570# Kernel BOOTP support
2571
2572options BOOTP # Use BOOTP to obtain IP address/hostname
2573 # Requires NFSCLIENT and NFS_ROOT
2574options BOOTP_NFSROOT # NFS mount root filesystem using BOOTP info
2575options BOOTP_NFSV3 # Use NFS v3 to NFS mount root
2576options BOOTP_COMPAT # Workaround for broken bootp daemons.
2577options BOOTP_WIRED_TO=fxp0 # Use interface fxp0 for BOOTP
2578options BOOTP_BLOCKSIZE=8192 # Override NFS block size
2579
2580#
2581# Add software watchdog routines.
2582#
2583options SW_WATCHDOG
2584
2585#
2586# Add the software deadlock resolver thread.
2587#
2588options DEADLKRES
2589
2590#
2591# Disable swapping of stack pages. This option removes all
2592# code which actually performs swapping, so it's not possible to turn
2593# it back on at run-time.
2594#
2595# This is sometimes usable for systems which don't have any swap space
2596# (see also sysctls "vm.defer_swapspace_pageouts" and
2597# "vm.disable_swapspace_pageouts")
2598#
2599#options NO_SWAPPING
2600
2601# Set the number of sf_bufs to allocate. sf_bufs are virtual buffers
2602# for sendfile(2) that are used to map file VM pages, and normally
2603# default to a quantity that is roughly 16*MAXUSERS+512. You would
2604# typically want about 4 of these for each simultaneous file send.
2605#
2606options NSFBUFS=1024
2607
2608#
2609# Enable extra debugging code for locks. This stores the filename and
2610# line of whatever acquired the lock in the lock itself, and changes a
2611# number of function calls to pass around the relevant data. This is
2612# not at all useful unless you are debugging lock code. Also note
2613# that it is likely to break e.g. fstat(1) unless you recompile your
2614# userland with -DDEBUG_LOCKS as well.
2615#
2616options DEBUG_LOCKS
2617
2618
2619#####################################################################
2620# USB support
2621# UHCI controller
2622device uhci
2623# OHCI controller
2624device ohci
2625# EHCI controller
2626device ehci
2627# XHCI controller
2628device xhci
2629# SL811 Controller
2630#device slhci
2631# General USB code (mandatory for USB)
2632device usb
2633#
2634# USB Double Bulk Pipe devices
2635device udbp
2636# USB Fm Radio
2637device ufm
2638# Human Interface Device (anything with buttons and dials)
2639device uhid
2640# USB keyboard
2641device ukbd
2642# USB printer
2643device ulpt
2644# USB mass storage driver (Requires scbus and da)
2645device umass
2646# USB mass storage driver for device-side mode
2647device usfs
2648# USB support for Belkin F5U109 and Magic Control Technology serial adapters
2649device umct
2650# USB modem support
2651device umodem
2652# USB mouse
2653device ums
2654# eGalax USB touch screen
2655device uep
2656# Diamond Rio 500 MP3 player
2657device urio
2658#
2659# USB serial support
2660device ucom
2661# USB support for 3G modem cards by Option, Novatel, Huawei and Sierra
2662device u3g
2663# USB support for Technologies ARK3116 based serial adapters
2664device uark
2665# USB support for Belkin F5U103 and compatible serial adapters
2666device ubsa
2667# USB support for serial adapters based on the FT8U100AX and FT8U232AM
2668device uftdi
2669# USB support for some Windows CE based serial communication.
2670device uipaq
2671# USB support for Prolific PL-2303 serial adapters
2672device uplcom
2673# USB support for Silicon Laboratories CP2101/CP2102 based USB serial adapters
2674device uslcom
2675# USB Visor and Palm devices
2676device uvisor
2677# USB serial support for DDI pocket's PHS
2678device uvscom
2679#
2680# ADMtek USB ethernet. Supports the LinkSys USB100TX,
2681# the Billionton USB100, the Melco LU-ATX, the D-Link DSB-650TX
2682# and the SMC 2202USB. Also works with the ADMtek AN986 Pegasus
2683# eval board.
2684device aue
2685
2686# ASIX Electronics AX88172 USB 2.0 ethernet driver. Used in the
2687# LinkSys USB200M and various other adapters.
2688device axe
2689
2690#
2691# Devices which communicate using Ethernet over USB, particularly
2692# Communication Device Class (CDC) Ethernet specification. Supports
2693# Sharp Zaurus PDAs, some DOCSIS cable modems and so on.
2694device cdce
2695#
2696# CATC USB-EL1201A USB ethernet. Supports the CATC Netmate
2697# and Netmate II, and the Belkin F5U111.
2698device cue
2699#
2700# Kawasaki LSI ethernet. Supports the LinkSys USB10T,
2701# Entrega USB-NET-E45, Peracom Ethernet Adapter, the
2702# 3Com 3c19250, the ADS Technologies USB-10BT, the ATen UC10T,
2703# the Netgear EA101, the D-Link DSB-650, the SMC 2102USB
2704# and 2104USB, and the Corega USB-T.
2705device kue
2706#
2707# RealTek RTL8150 USB to fast ethernet. Supports the Melco LUA-KTX
2708# and the GREEN HOUSE GH-USB100B.
2709device rue
2710#
2711# Davicom DM9601E USB to fast ethernet. Supports the Corega FEther USB-TXC.
2712device udav
2713#
2714# HSxPA devices from Option N.V
2715device uhso
2716
2717#
2718# Ralink Technology RT2501USB/RT2601USB wireless driver
2719device rum
2720# Ralink Technology RT2700U/RT2800U/RT3000U wireless driver
2721device run
2722#
2723# Atheros AR5523 wireless driver
2724device uath
2725#
2726# Ralink Technology RT2500USB wireless driver
2727device ural
2728#
2729# ZyDas ZD1211/ZD1211B wireless driver
2730device zyd
2731
2732#
2733# debugging options for the USB subsystem
2734#
2735options USB_DEBUG
2736options U3G_DEBUG
2737
2738# options for ukbd:
2739options UKBD_DFLT_KEYMAP # specify the built-in keymap
2740makeoptions UKBD_DFLT_KEYMAP=it.iso
2741
2742# options for uplcom:
2743options UPLCOM_INTR_INTERVAL=100 # interrupt pipe interval
2744 # in milliseconds
2745
2746# options for uvscom:
2747options UVSCOM_DEFAULT_OPKTSIZE=8 # default output packet size
2748options UVSCOM_INTR_INTERVAL=100 # interrupt pipe interval
2749 # in milliseconds
2750
2751#####################################################################
2752# FireWire support
2753
2754device firewire # FireWire bus code
2755device sbp # SCSI over Firewire (Requires scbus and da)
2756device sbp_targ # SBP-2 Target mode (Requires scbus and targ)
2757device fwe # Ethernet over FireWire (non-standard!)
2758device fwip # IP over FireWire (RFC2734 and RFC3146)
2759
2760#####################################################################
2761# dcons support (Dumb Console Device)
2762
2763device dcons # dumb console driver
2764device dcons_crom # FireWire attachment
2765options DCONS_BUF_SIZE=16384 # buffer size
2766options DCONS_POLL_HZ=100 # polling rate
2767options DCONS_FORCE_CONSOLE=0 # force to be the primary console
2768options DCONS_FORCE_GDB=1 # force to be the gdb device
2769
2770#####################################################################
2771# crypto subsystem
2772#
2773# This is a port of the OpenBSD crypto framework. Include this when
2774# configuring IPSEC and when you have a h/w crypto device to accelerate
2775# user applications that link to OpenSSL.
2776#
2777# Drivers are ports from OpenBSD with some simple enhancements that have
2778# been fed back to OpenBSD.
2779
2780device crypto # core crypto support
2781device cryptodev # /dev/crypto for access to h/w
2782
2783device rndtest # FIPS 140-2 entropy tester
2784
2785device hifn # Hifn 7951, 7781, etc.
2786options HIFN_DEBUG # enable debugging support: hw.hifn.debug
2787options HIFN_RNDTEST # enable rndtest support
2788
2789device ubsec # Broadcom 5501, 5601, 58xx
2790options UBSEC_DEBUG # enable debugging support: hw.ubsec.debug
2791options UBSEC_RNDTEST # enable rndtest support
2792
2793#####################################################################
2794
2795
2796#
2797# Embedded system options:
2798#
2799# An embedded system might want to run something other than init.
2800options INIT_PATH=/sbin/init:/stand/sysinstall
2801
2802# Debug options
2803options BUS_DEBUG # enable newbus debugging
2804options DEBUG_VFS_LOCKS # enable VFS lock debugging
2805options SOCKBUF_DEBUG # enable sockbuf last record/mb tail checking
2806
2807#
2808# Verbose SYSINIT
2809#
2810# Make the SYSINIT process performed by mi_startup() verbose. This is very
2811# useful when porting to a new architecture. If DDB is also enabled, this
2812# will print function names instead of addresses.
2813options VERBOSE_SYSINIT
2814
2815#####################################################################
2816# SYSV IPC KERNEL PARAMETERS
2817#
2818# Maximum number of entries in a semaphore map.
2819options SEMMAP=31
2820
2821# Maximum number of System V semaphores that can be used on the system at
2822# one time.
2823options SEMMNI=11
2824
2825# Total number of semaphores system wide
2826options SEMMNS=61
2827
2828# Total number of undo structures in system
2829options SEMMNU=31
2830
2831# Maximum number of System V semaphores that can be used by a single process
2832# at one time.
2833options SEMMSL=61
2834
2835# Maximum number of operations that can be outstanding on a single System V
2836# semaphore at one time.
2837options SEMOPM=101
2838
2839# Maximum number of undo operations that can be outstanding on a single
2840# System V semaphore at one time.
2841options SEMUME=11
2842
2843# Maximum number of shared memory pages system wide.
2844options SHMALL=1025
2845
2846# Maximum size, in bytes, of a single System V shared memory region.
2847options SHMMAX=(SHMMAXPGS*PAGE_SIZE+1)
2848options SHMMAXPGS=1025
2849
2850# Minimum size, in bytes, of a single System V shared memory region.
2851options SHMMIN=2
2852
2853# Maximum number of shared memory regions that can be used on the system
2854# at one time.
2855options SHMMNI=33
2856
2857# Maximum number of System V shared memory regions that can be attached to
2858# a single process at one time.
2859options SHMSEG=9
2860
2861# Compress user core dumps.
2862options COMPRESS_USER_CORES
2863# required to compress file output from kernel for COMPRESS_USER_CORES.
2864device gzio
2865
2866# Set the amount of time (in seconds) the system will wait before
2867# rebooting automatically when a kernel panic occurs. If set to (-1),
2868# the system will wait indefinitely until a key is pressed on the
2869# console.
2870options PANIC_REBOOT_WAIT_TIME=16
2871
2872# Attempt to bypass the buffer cache and put data directly into the
2873# userland buffer for read operation when O_DIRECT flag is set on the
2874# file. Both offset and length of the read operation must be
2875# multiples of the physical media sector size.
2876#
2877options DIRECTIO
2878
2879# Specify a lower limit for the number of swap I/O buffers. They are
2880# (among other things) used when bypassing the buffer cache due to
2881# DIRECTIO kernel option enabled and O_DIRECT flag set on file.
2882#
2883options NSWBUF_MIN=120
2884
2885#####################################################################
2886
2887# More undocumented options for linting.
2888# Note that documenting these is not considered an affront.
2889
2890options CAM_DEBUG_DELAY
2891
2892# VFS cluster debugging.
2893options CLUSTERDEBUG
2894
2895options DEBUG
2896
2897# Kernel filelock debugging.
2898options LOCKF_DEBUG
2899
2900# System V compatible message queues
2901# Please note that the values provided here are used to test kernel
2902# building. The defaults in the sources provide almost the same numbers.
2903# MSGSSZ must be a power of 2 between 8 and 1024.
2904options MSGMNB=2049 # Max number of chars in queue
2905options MSGMNI=41 # Max number of message queue identifiers
2906options MSGSEG=2049 # Max number of message segments
2907options MSGSSZ=16 # Size of a message segment
2908options MSGTQL=41 # Max number of messages in system
2909
2910options NBUF=512 # Number of buffer headers
2911
2912options SCSI_NCR_DEBUG
2913options SCSI_NCR_MAX_SYNC=10000
2914options SCSI_NCR_MAX_WIDE=1
2915options SCSI_NCR_MYADDR=7
2916
2917options SC_DEBUG_LEVEL=5 # Syscons debug level
2918options SC_RENDER_DEBUG # syscons rendering debugging
2919
2920options SHOW_BUSYBUFS # List buffers that prevent root unmount
2921options VFS_BIO_DEBUG # VFS buffer I/O debugging
2922
2923options KSTACK_MAX_PAGES=32 # Maximum pages to give the kernel stack
2924
2925# Adaptec Array Controller driver options
2926options AAC_DEBUG # Debugging levels:
2927 # 0 - quiet, only emit warnings
2928 # 1 - noisy, emit major function
2929 # points and things done
2930 # 2 - extremely noisy, emit trace
2931 # items in loops, etc.
2932
2933# Resource Accounting
2934options RACCT
2935
2936# Yet more undocumented options for linting.
2937# BKTR_ALLOC_PAGES has no effect except to cause warnings, and
2938# BROOKTREE_ALLOC_PAGES hasn't actually been superseded by it, since the
2939# driver still mostly spells this option BROOKTREE_ALLOC_PAGES.
2940##options BKTR_ALLOC_PAGES=(217*4+1)
2941options BROOKTREE_ALLOC_PAGES=(217*4+1)
2942options MAXFILES=999
2943