18c18
< # $FreeBSD: stable/10/sys/arm/conf/ARNDALE 266332 2014-05-17 17:54:38Z ian $
---
> # $FreeBSD: stable/10/sys/arm/conf/ARNDALE 266341 2014-05-17 19:37:04Z ian $
19a20
> include "EXYNOS5250.common"
22,135d22
< include "../samsung/exynos/std.exynos5"
<
< makeoptions MODULES_OVERRIDE=""
< makeoptions WITHOUT_MODULES="ahc"
<
< makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols
< makeoptions WERROR="-Werror"
<
< options HZ=100
< options SCHED_4BSD # 4BSD scheduler
< options INET # InterNETworking
< options INET6 # IPv6 communications protocols
< options GEOM_PART_BSD # BSD partition scheme
< options GEOM_PART_MBR # MBR partition scheme
< options TMPFS # Efficient memory filesystem
< options FFS # Berkeley Fast Filesystem
< options SOFTUPDATES
< options UFS_ACL # Support for access control lists
< options UFS_DIRHASH # Improve performance on big directories
< options MSDOSFS # MSDOS Filesystem
< options CD9660 # ISO 9660 Filesystem
< options PROCFS # Process filesystem (requires PSEUDOFS)
< options PSEUDOFS # Pseudo-filesystem framework
< options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!]
< options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
< options KTRACE
< options SYSVSHM # SYSV-style shared memory
< options SYSVMSG # SYSV-style message queues
< options SYSVSEM # SYSV-style semaphores
< options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions
< options KBD_INSTALL_CDEV
< options PREEMPTION
< options FREEBSD_BOOT_LOADER
< options VFP # vfp/neon
<
< # Debugging
< makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols
< options BREAK_TO_DEBUGGER
< #options VERBOSE_SYSINIT # Enable verbose sysinit messages
< options KDB
< options DDB # Enable the kernel debugger
< #options INVARIANTS # Enable calls of extra sanity checking
< #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS
< #options WITNESS # Enable checks to detect deadlocks and cycles
< #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed
< #options DIAGNOSTIC
<
< # NFS support
< options NFSCL # Network Filesystem Client
< options NFSLOCKD # Network Lock Manager
< options NFS_ROOT # NFS usable as /, requires NFSCLIENT
<
< # Uncomment this for NFS root
< #options NFS_ROOT # NFS usable as /, requires NFSCL
< #options BOOTP_NFSROOT
< #options BOOTP_COMPAT
< #options BOOTP
< #options BOOTP_NFSV3
< #options BOOTP_WIRED_TO=cpsw0
<
< device mmc # mmc/sd bus
< device mmcsd # mmc/sd flash cards
< device sdhci # generic sdhci
<
< options ROOTDEVNAME=\"ufs:/dev/da0\"
<
< #options SMP
<
< # Pseudo devices
<
< device loop
< device random
< device pty
< device md
< device gpio
<
< # USB support
< options USB_HOST_ALIGN=64 # Align usb buffers to cache line size.
< device usb
< options USB_DEBUG
< #options USB_REQ_DEBUG
< #options USB_VERBOSE
< #device musb
< device ehci
< #device ohci
<
< device umass
< device scbus # SCSI bus (required for SCSI)
< device da # Direct Access (disks)
< device pass
<
< # SATA
< #device ata
< #device atadisk
< #device mvs
<
< # Serial ports
< device uart
<
< # I2C (TWSI)
< #device iic
< #device iicbus
<
< # Ethernet
< device ether
< device mii
< device smsc
< device smscphy
<
< # USB ethernet support, requires miibus
< device miibus
< device axe # ASIX Electronics USB Ethernet
< device bpf # Berkeley packet filter
<
< # $FreeBSD: stable/10/sys/arm/conf/ARNDALE 266332 2014-05-17 17:54:38Z ian $
---
> # $FreeBSD: stable/10/sys/arm/conf/ARNDALE 266341 2014-05-17 19:37:04Z ian $
19a20
> include "EXYNOS5250.common"
22,135d22
< include "../samsung/exynos/std.exynos5"
<
< makeoptions MODULES_OVERRIDE=""
< makeoptions WITHOUT_MODULES="ahc"
<
< makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols
< makeoptions WERROR="-Werror"
<
< options HZ=100
< options SCHED_4BSD # 4BSD scheduler
< options INET # InterNETworking
< options INET6 # IPv6 communications protocols
< options GEOM_PART_BSD # BSD partition scheme
< options GEOM_PART_MBR # MBR partition scheme
< options TMPFS # Efficient memory filesystem
< options FFS # Berkeley Fast Filesystem
< options SOFTUPDATES
< options UFS_ACL # Support for access control lists
< options UFS_DIRHASH # Improve performance on big directories
< options MSDOSFS # MSDOS Filesystem
< options CD9660 # ISO 9660 Filesystem
< options PROCFS # Process filesystem (requires PSEUDOFS)
< options PSEUDOFS # Pseudo-filesystem framework
< options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!]
< options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
< options KTRACE
< options SYSVSHM # SYSV-style shared memory
< options SYSVMSG # SYSV-style message queues
< options SYSVSEM # SYSV-style semaphores
< options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions
< options KBD_INSTALL_CDEV
< options PREEMPTION
< options FREEBSD_BOOT_LOADER
< options VFP # vfp/neon
<
< # Debugging
< makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols
< options BREAK_TO_DEBUGGER
< #options VERBOSE_SYSINIT # Enable verbose sysinit messages
< options KDB
< options DDB # Enable the kernel debugger
< #options INVARIANTS # Enable calls of extra sanity checking
< #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS
< #options WITNESS # Enable checks to detect deadlocks and cycles
< #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed
< #options DIAGNOSTIC
<
< # NFS support
< options NFSCL # Network Filesystem Client
< options NFSLOCKD # Network Lock Manager
< options NFS_ROOT # NFS usable as /, requires NFSCLIENT
<
< # Uncomment this for NFS root
< #options NFS_ROOT # NFS usable as /, requires NFSCL
< #options BOOTP_NFSROOT
< #options BOOTP_COMPAT
< #options BOOTP
< #options BOOTP_NFSV3
< #options BOOTP_WIRED_TO=cpsw0
<
< device mmc # mmc/sd bus
< device mmcsd # mmc/sd flash cards
< device sdhci # generic sdhci
<
< options ROOTDEVNAME=\"ufs:/dev/da0\"
<
< #options SMP
<
< # Pseudo devices
<
< device loop
< device random
< device pty
< device md
< device gpio
<
< # USB support
< options USB_HOST_ALIGN=64 # Align usb buffers to cache line size.
< device usb
< options USB_DEBUG
< #options USB_REQ_DEBUG
< #options USB_VERBOSE
< #device musb
< device ehci
< #device ohci
<
< device umass
< device scbus # SCSI bus (required for SCSI)
< device da # Direct Access (disks)
< device pass
<
< # SATA
< #device ata
< #device atadisk
< #device mvs
<
< # Serial ports
< device uart
<
< # I2C (TWSI)
< #device iic
< #device iicbus
<
< # Ethernet
< device ether
< device mii
< device smsc
< device smscphy
<
< # USB ethernet support, requires miibus
< device miibus
< device axe # ASIX Electronics USB Ethernet
< device bpf # Berkeley packet filter
<