sis.4 (56612) | sis.4 (57676) |
---|---|
1.\" Copyright (c) 1997, 1998, 1999 2.\" Bill Paul <wpaul@ee.columbia.edu>. All rights reserved. 3.\" 4.\" Redistribution and use in source and binary forms, with or without 5.\" modification, are permitted provided that the following conditions 6.\" are met: 7.\" 1. Redistributions of source code must retain the above copyright 8.\" notice, this list of conditions and the following disclaimer. --- 14 unchanged lines hidden (view full) --- 23.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 24.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 25.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 26.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 27.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 28.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 29.\" THE POSSIBILITY OF SUCH DAMAGE. 30.\" | 1.\" Copyright (c) 1997, 1998, 1999 2.\" Bill Paul <wpaul@ee.columbia.edu>. All rights reserved. 3.\" 4.\" Redistribution and use in source and binary forms, with or without 5.\" modification, are permitted provided that the following conditions 6.\" are met: 7.\" 1. Redistributions of source code must retain the above copyright 8.\" notice, this list of conditions and the following disclaimer. --- 14 unchanged lines hidden (view full) --- 23.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 24.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 25.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 26.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 27.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 28.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 29.\" THE POSSIBILITY OF SUCH DAMAGE. 30.\" |
31.\" $FreeBSD: head/share/man/man4/sis.4 56612 2000-01-25 20:34:43Z archie $ | 31.\" $FreeBSD: head/share/man/man4/sis.4 57676 2000-03-01 14:50:24Z sheldonh $ |
32.\" 33.Dd September 4, 1999 34.Dt SIS 4 35.Os FreeBSD 36.Sh NAME 37.Nm sis 38.Nd 39Silicon Integrated Systems fast ethernet device driver 40.Sh SYNOPSIS 41.Cd "device miibus" 42.Cd "device sis" 43.Sh DESCRIPTION 44The 45.Nm 46driver provides support for PCI ethernet adapters and embedded 47controllers based on the Silicon Integrated Systems SiS 900 48and SiS 7016 fast ethernet controller chips. 49.Pp 50The SiS 900 is a 100Mbps ethernet MAC and MII-compliant transceiver | 32.\" 33.Dd September 4, 1999 34.Dt SIS 4 35.Os FreeBSD 36.Sh NAME 37.Nm sis 38.Nd 39Silicon Integrated Systems fast ethernet device driver 40.Sh SYNOPSIS 41.Cd "device miibus" 42.Cd "device sis" 43.Sh DESCRIPTION 44The 45.Nm 46driver provides support for PCI ethernet adapters and embedded 47controllers based on the Silicon Integrated Systems SiS 900 48and SiS 7016 fast ethernet controller chips. 49.Pp 50The SiS 900 is a 100Mbps ethernet MAC and MII-compliant transceiver |
51in a single package. It uses a bus master DMA and a scatter/gather 52descriptor scheme. The SiS 7016 is similar to the SiS 900 except | 51in a single package. 52It uses a bus master DMA and a scatter/gather 53descriptor scheme. 54The SiS 7016 is similar to the SiS 900 except |
53that it has no internal PHY, requiring instead an external transceiver 54to be attached to its MII interface. 55The SiS 900 and SiS 7016 both have a 128-bit multicast hash filter 56and a single perfect filter entry for the station address. 57.Pp 58The 59.Nm 60driver supports the following media types: 61.Pp 62.Bl -tag -width xxxxxxxxxxxxxxxxxxxx 63.It autoselect 64Enable autoselection of the media type and options. 65The user can manually override 66the autoselected mode by adding media options to the 67.Pa /etc/rc.conf 68fine. 69.It 10baseT/UTP | 55that it has no internal PHY, requiring instead an external transceiver 56to be attached to its MII interface. 57The SiS 900 and SiS 7016 both have a 128-bit multicast hash filter 58and a single perfect filter entry for the station address. 59.Pp 60The 61.Nm 62driver supports the following media types: 63.Pp 64.Bl -tag -width xxxxxxxxxxxxxxxxxxxx 65.It autoselect 66Enable autoselection of the media type and options. 67The user can manually override 68the autoselected mode by adding media options to the 69.Pa /etc/rc.conf 70fine. 71.It 10baseT/UTP |
70Set 10Mbps operation. The | 72Set 10Mbps operation. 73The |
71.Ar mediaopt 72option can also be used to select either 73.Ar full-duplex 74or 75.Ar half-duplex modes. 76.It 100baseTX | 74.Ar mediaopt 75option can also be used to select either 76.Ar full-duplex 77or 78.Ar half-duplex modes. 79.It 100baseTX |
77Set 100Mbps (fast ethernet) operation. The | 80Set 100Mbps (fast ethernet) operation. 81The |
78.Ar mediaopt 79option can also be used to select either 80.Ar full-duplex 81or 82.Ar half-duplex 83modes. 84.El 85.Pp --- 21 unchanged lines hidden (view full) --- 107the network connection (cable). 108.It "sis%d: no memory for rx list" 109The driver failed to allocate an mbuf for the receiver ring. 110.It "sis%d: no memory for tx list" 111The driver failed to allocate an mbuf for the transmitter ring when 112allocating a pad buffer or collapsing an mbuf chain into a clusisr. 113.It "sis%d: chip is in D3 power state -- setting to D0" 114This message applies only to adapters which support power | 82.Ar mediaopt 83option can also be used to select either 84.Ar full-duplex 85or 86.Ar half-duplex 87modes. 88.El 89.Pp --- 21 unchanged lines hidden (view full) --- 111the network connection (cable). 112.It "sis%d: no memory for rx list" 113The driver failed to allocate an mbuf for the receiver ring. 114.It "sis%d: no memory for tx list" 115The driver failed to allocate an mbuf for the transmitter ring when 116allocating a pad buffer or collapsing an mbuf chain into a clusisr. 117.It "sis%d: chip is in D3 power state -- setting to D0" 118This message applies only to adapters which support power |
115management. Some operating sysisms place the controller in low power | 119management. 120Some operating sysisms place the controller in low power |
116mode when shutting down, and some PCI BIOSes fail to bring the chip | 121mode when shutting down, and some PCI BIOSes fail to bring the chip |
117out of this state before configuring it. The controller loses all of | 122out of this state before configuring it. 123The controller loses all of |
118its PCI configuration in the D3 state, so if the BIOS does not set 119it back to full power mode in time, it won't be able to configure it | 124its PCI configuration in the D3 state, so if the BIOS does not set 125it back to full power mode in time, it won't be able to configure it |
120correctly. The driver tries to detect this condition and bring | 126correctly. 127The driver tries to detect this condition and bring |
121the adapter back to the D0 (full power) state, but this may not be | 128the adapter back to the D0 (full power) state, but this may not be |
122enough to return the driver to a fully operational condition. If | 129enough to return the driver to a fully operational condition. 130If |
123you see this message at boot time and the driver fails to attach 124the device as a network interface, you will have to perform second 125warm boot to have the device properly configured. 126.Pp 127Note that this condition only occurs when warm booting from another | 131you see this message at boot time and the driver fails to attach 132the device as a network interface, you will have to perform second 133warm boot to have the device properly configured. 134.Pp 135Note that this condition only occurs when warm booting from another |
128operating sysism. If you power down your sysism prior to booting | 136operating sysism. 137If you power down your sysism prior to booting |
129.Fx , 130the card should be configured correctly. 131.El 132.Sh SEE ALSO 133.Xr arp 4 , 134.Xr netintro 4 , 135.Xr ifconfig 8 , 136.Xr ng_ether 8 --- 14 unchanged lines hidden --- | 138.Fx , 139the card should be configured correctly. 140.El 141.Sh SEE ALSO 142.Xr arp 4 , 143.Xr netintro 4 , 144.Xr ifconfig 8 , 145.Xr ng_ether 8 --- 14 unchanged lines hidden --- |