1
2This is an enhanced version of the CMU BOOTP server which was derived
3from the original BOOTP server created by Bill Croft at Stanford.
4This version merges all the enhancements and bug-fixes from the
5NetBSD, Columbia, and other versions.
6
7Please direct questions, comments, and bug reports to the list:
8 <bootp@andrew.cmu.edu>
9
10You can subscribe to this mailing list by sending mail to:
11 bootp-request@andrew.cmu.edu
12(The body of the message should contain: "Add <your-address>")
13
14[ From the NetBSD README file: ]
15
16BOOTPD is a useful adjunct to the nfs diskless boot EPROM code.
17
18The alternatives for initiating a boot of a kernel across a network
19are to use RARP protocol, or BOOTP protocol. BOOTP is more flexible;
20it allows additional items of information to be returned to the
21booting client; it also supports booting across gateways.
22
23[ From the CMU README file: ]
24
25Notes:
261) BOOTP was originally designed and implemented by Bill Croft at Stanford.
27 Much of the credit for the ideas and the code goes to him. We've added
28 code to support the vendor specific area of the packet as specified in
29 RFC1048. We've also improved the host lookup algorithm and added some
30 extra logging.
31
322) The server now uses syslog to do logging. Specifically it uses the 4.3bsd
33 version. I've #ifdef'd all of these calls. If you are running 4.2 you
34 should compile without the -DSYSLOG switch.
35
363) You must update your /etc/services file to contain the following two lines:
37 bootps 67/udp bootp # BOOTP Server
38 bootpc 68/udp # BOOTP Client
39
404) Edit the bootptab. It has some explanitory comments, and there
41 is a manual entry describing its format (bootptab.5)
42 If you have any questions, just let us know.
43
44Construction:
45 [ See the file Installation which is more up-to-date. -gwr ]
46
47 Make sure all of the files exist first. If anything is missing,
48 please contact either Walt Wimer or Drew Perkins by E-mail or phone.
49 Addresses and phone numbers are listed below.
50
51 Type 'make'. The options at present are: -DSYSLOG which enables logging
52 code, -DDEBUG which enables table dumping via signals, and -DVEND_CMU
53 which enables the CMU extensions for CMU PC/IP.
54
55 Edit the bootptab. The man page and the comments in the file should
56 explain how to go about doing so. If you have any problems, let me know.
57
58 Type 'make install'. This should put all of the files in the right place.
59
60 Edit your /etc/rc.local or /etc/inetd.conf file to start up bootpd upon
61 reboot. The following is a sample /etc/inetd.conf entry:
62 # BOOTP server
63 bootps dgram udp wait root /usr/etc/bootpd bootpd -i
64
65Care and feeding:
66 If you change the interface cards on your host or add new hosts you will
67 need to update /etc/bootptab. Just edit it as before. Once you write
68 it back out, bootpd will notice that there is a new copy and will
69 reread it the next time it gets a request.
70
71 If your bootp clients don't get a response then several things might be
72 wrong. Most often, the entry for that host is not in the database.
73 Check the hardware address and then check the entry and make sure
74 everything is right. Other problems include the server machine crashing,
75 bad cables, and the like. If your network is very congested you should
76 try making your bootp clients send additional requests before giving up.
77
78
79November 7, 1988
80
81
82Walter L. Wimer Drew D. Perkins
83ww0n@andrew.cmu.edu ddp@andrew.cmu.edu
84(412) 268-6252 (412) 268-8576
85
864910 Forbes Ave
87Pittsburgh, PA 15213
88
89[ Contents description by file: ]
90
91Announce* Text of release announcements
92Changes Change history, reverse chronological
93ConvOldTab.sh Script to convert old (1.x) bootptab files
94Installation Instructions for building and installing
95Makefile* for "make"
96README This file
97ToDo Things not yet done
98bootp.h The protocol header file
99bootpd.8 Manual page for bootpd, boopgw
100bootpd.c BOOTP server main module
101bootpd.h header for above (and others)
102bootpef.8 Manual page for bootpef
103bootpef.c BOOTP extension file compiler
104bootpgw.c BOOTP gateway main module
105bootptab.5 A manual describing the bootptab format
106bootptab.cmu A sample database file for the server
107bootptab.mcs Another sample from <gwr@mc.com>
108bootptest.8 Manual page for bootptest
109bootptest.c BOOTP test program (fake client)
110bootptest.h header for above
111dovend.c Vendor Option builder (for bootpd, bootpef)
112dovend.h header for above
113dumptab.c Implements debugging dump for bootpd
114getether.c For bootptest (not used yet)
115getether.h header for above
116getif.c Get network interface info.
117getif.h header for above
118hash.c The hash table module
119hash.h header for above
120hwaddr.c Hardware address support
121hwaddr.h header for above
122lookup.c Internet Protocol address lookup
123lookup.h header for above
124patchlevel.h Holds version numbers
125print-bootp.c Prints BOOTP packets (taken from BSD tcpdump)
126readfile.c The configuration file-reading routines
127readfile.h header for above
128report.c Does syslog-style messages
129report.h header for above
130strerror.c Library errno-to-string (for systems lacking it)
131syslog.conf Sample config file for syslogd(8)
132syslog.h For systems that lack syslog(3)
133try*.c Test programs (for debugging)
134tzone.c Get timezone offset
135tzone.h header for above
| 2
3This is an enhanced version of the CMU BOOTP server which was derived
4from the original BOOTP server created by Bill Croft at Stanford.
5This version merges all the enhancements and bug-fixes from the
6NetBSD, Columbia, and other versions.
7
8Please direct questions, comments, and bug reports to the list:
9 <bootp@andrew.cmu.edu>
10
11You can subscribe to this mailing list by sending mail to:
12 bootp-request@andrew.cmu.edu
13(The body of the message should contain: "Add <your-address>")
14
15[ From the NetBSD README file: ]
16
17BOOTPD is a useful adjunct to the nfs diskless boot EPROM code.
18
19The alternatives for initiating a boot of a kernel across a network
20are to use RARP protocol, or BOOTP protocol. BOOTP is more flexible;
21it allows additional items of information to be returned to the
22booting client; it also supports booting across gateways.
23
24[ From the CMU README file: ]
25
26Notes:
271) BOOTP was originally designed and implemented by Bill Croft at Stanford.
28 Much of the credit for the ideas and the code goes to him. We've added
29 code to support the vendor specific area of the packet as specified in
30 RFC1048. We've also improved the host lookup algorithm and added some
31 extra logging.
32
332) The server now uses syslog to do logging. Specifically it uses the 4.3bsd
34 version. I've #ifdef'd all of these calls. If you are running 4.2 you
35 should compile without the -DSYSLOG switch.
36
373) You must update your /etc/services file to contain the following two lines:
38 bootps 67/udp bootp # BOOTP Server
39 bootpc 68/udp # BOOTP Client
40
414) Edit the bootptab. It has some explanitory comments, and there
42 is a manual entry describing its format (bootptab.5)
43 If you have any questions, just let us know.
44
45Construction:
46 [ See the file Installation which is more up-to-date. -gwr ]
47
48 Make sure all of the files exist first. If anything is missing,
49 please contact either Walt Wimer or Drew Perkins by E-mail or phone.
50 Addresses and phone numbers are listed below.
51
52 Type 'make'. The options at present are: -DSYSLOG which enables logging
53 code, -DDEBUG which enables table dumping via signals, and -DVEND_CMU
54 which enables the CMU extensions for CMU PC/IP.
55
56 Edit the bootptab. The man page and the comments in the file should
57 explain how to go about doing so. If you have any problems, let me know.
58
59 Type 'make install'. This should put all of the files in the right place.
60
61 Edit your /etc/rc.local or /etc/inetd.conf file to start up bootpd upon
62 reboot. The following is a sample /etc/inetd.conf entry:
63 # BOOTP server
64 bootps dgram udp wait root /usr/etc/bootpd bootpd -i
65
66Care and feeding:
67 If you change the interface cards on your host or add new hosts you will
68 need to update /etc/bootptab. Just edit it as before. Once you write
69 it back out, bootpd will notice that there is a new copy and will
70 reread it the next time it gets a request.
71
72 If your bootp clients don't get a response then several things might be
73 wrong. Most often, the entry for that host is not in the database.
74 Check the hardware address and then check the entry and make sure
75 everything is right. Other problems include the server machine crashing,
76 bad cables, and the like. If your network is very congested you should
77 try making your bootp clients send additional requests before giving up.
78
79
80November 7, 1988
81
82
83Walter L. Wimer Drew D. Perkins
84ww0n@andrew.cmu.edu ddp@andrew.cmu.edu
85(412) 268-6252 (412) 268-8576
86
874910 Forbes Ave
88Pittsburgh, PA 15213
89
90[ Contents description by file: ]
91
92Announce* Text of release announcements
93Changes Change history, reverse chronological
94ConvOldTab.sh Script to convert old (1.x) bootptab files
95Installation Instructions for building and installing
96Makefile* for "make"
97README This file
98ToDo Things not yet done
99bootp.h The protocol header file
100bootpd.8 Manual page for bootpd, boopgw
101bootpd.c BOOTP server main module
102bootpd.h header for above (and others)
103bootpef.8 Manual page for bootpef
104bootpef.c BOOTP extension file compiler
105bootpgw.c BOOTP gateway main module
106bootptab.5 A manual describing the bootptab format
107bootptab.cmu A sample database file for the server
108bootptab.mcs Another sample from <gwr@mc.com>
109bootptest.8 Manual page for bootptest
110bootptest.c BOOTP test program (fake client)
111bootptest.h header for above
112dovend.c Vendor Option builder (for bootpd, bootpef)
113dovend.h header for above
114dumptab.c Implements debugging dump for bootpd
115getether.c For bootptest (not used yet)
116getether.h header for above
117getif.c Get network interface info.
118getif.h header for above
119hash.c The hash table module
120hash.h header for above
121hwaddr.c Hardware address support
122hwaddr.h header for above
123lookup.c Internet Protocol address lookup
124lookup.h header for above
125patchlevel.h Holds version numbers
126print-bootp.c Prints BOOTP packets (taken from BSD tcpdump)
127readfile.c The configuration file-reading routines
128readfile.h header for above
129report.c Does syslog-style messages
130report.h header for above
131strerror.c Library errno-to-string (for systems lacking it)
132syslog.conf Sample config file for syslogd(8)
133syslog.h For systems that lack syslog(3)
134try*.c Test programs (for debugging)
135tzone.c Get timezone offset
136tzone.h header for above
|