Deleted Added
sdiff udiff text old ( 18344 ) new ( 50448 )
full compact
Makefile.in (18344) Makefile.in (50448)
1# Makefile for GNU C compiler.
1# Makefile for GNU C compiler.
2# Copyright (C) 1987, 88, 90-94, 1995 Free Software Foundation, Inc.
2# Copyright (C) 1987, 88, 90-97, 1998 Free Software Foundation, Inc.
3
4#This file is part of GNU CC.
5
6#GNU CC is free software; you can redistribute it and/or modify
7#it under the terms of the GNU General Public License as published by
8#the Free Software Foundation; either version 2, or (at your option)
9#any later version.
10

--- 10 unchanged lines hidden (view full) ---

21# The targets for external use include:
22# all, doc, proto, install, install-cross, install-cross-rest,
23# uninstall, TAGS, mostlyclean, clean, distclean, maintainer-clean,
24# stage1, stage2, stage3, stage4.
25
26# Suppress smart makes who think they know how to automake Yacc files
27.y.c:
28
3
4#This file is part of GNU CC.
5
6#GNU CC is free software; you can redistribute it and/or modify
7#it under the terms of the GNU General Public License as published by
8#the Free Software Foundation; either version 2, or (at your option)
9#any later version.
10

--- 10 unchanged lines hidden (view full) ---

21# The targets for external use include:
22# all, doc, proto, install, install-cross, install-cross-rest,
23# uninstall, TAGS, mostlyclean, clean, distclean, maintainer-clean,
24# stage1, stage2, stage3, stage4.
25
26# Suppress smart makes who think they know how to automake Yacc files
27.y.c:
28
29# Directory where sources are, from where we are.
30srcdir = @srcdir@
31VPATH = @srcdir@
32
29# Variables that exist for you to override.
30# See below for how to change them for certain systems.
31
32# List of language subdirectories.
33# This is overridden by configure.
33# Variables that exist for you to override.
34# See below for how to change them for certain systems.
35
36# List of language subdirectories.
37# This is overridden by configure.
34SUBDIRS =
38SUBDIRS =@subdirs@
35
36# Selection of languages to be made.
37# This is overridden by configure.
39
40# Selection of languages to be made.
41# This is overridden by configure.
38LANGUAGES = c objective-c proto
42LANGUAGES = c proto gcov$(exeext) @all_languages@
39
43
44# Selection of languages to be made during stage1 build.
45# This is overridden by configure.
46BOOT_LANGUAGES = c @all_boot_languages@
47
40ALLOCA =
41ALLOCA_FLAGS =
42ALLOCA_FINISH = true
43
44# Various ways of specifying flags for compilations:
45# CFLAGS is for the user to override to, e.g., do a bootstrap with -O2.
46# BOOT_CFLAGS is the value of CFLAGS to pass
47# to the stage2 and stage3 compilations
48ALLOCA =
49ALLOCA_FLAGS =
50ALLOCA_FINISH = true
51
52# Various ways of specifying flags for compilations:
53# CFLAGS is for the user to override to, e.g., do a bootstrap with -O2.
54# BOOT_CFLAGS is the value of CFLAGS to pass
55# to the stage2 and stage3 compilations
56# WARN_CFLAGS are the warning flags to pass to stage2 and stage3. It is
57# separate from BOOT_CFLAGS because people tend to override optimization
58# flags and we'd like them to still have warnings turned on. They are free
59# to explicitly turn warnings off if they wish.
48# XCFLAGS is used for most compilations but not when using the GCC just built.
60# XCFLAGS is used for most compilations but not when using the GCC just built.
61# TCFLAGS is used for compilations with the GCC just built.
49XCFLAGS =
62XCFLAGS =
63TCFLAGS =
50CFLAGS = -g
64CFLAGS = -g
51BOOT_CFLAGS = -O $(CFLAGS)
65BOOT_CFLAGS = -O2 $(CFLAGS)
66WARN_CFLAGS =
52# These exists to be overridden by the x-* and t-* files, respectively.
53X_CFLAGS =
54T_CFLAGS =
55
56X_CPPFLAGS =
57T_CPPFLAGS =
58
67# These exists to be overridden by the x-* and t-* files, respectively.
68X_CFLAGS =
69T_CFLAGS =
70
71X_CPPFLAGS =
72T_CPPFLAGS =
73
59CC = cc
60BISON = bison
74CC = @CC@
75# srcdir might be a relative pathname which won't be valid in a subdirectory,
76# so we must use objdir/srcdir instead to make it safe. objdir is always
77# a full pathname.
78BISON = `if [ -f $(objdir)/../bison/bison ] ; then case $(srcdir) in \
79 /*) echo $(objdir)/../bison/bison -L $(srcdir)/../bison/ ;; \
80 *) echo $(objdir)/../bison/bison -L $(objdir)/$(srcdir)/../bison/ ;; \
81 esac else echo bison ; fi`
61BISONFLAGS =
82BISONFLAGS =
62LEX = flex
83LEX = `if [ -f $(objdir)/../flex/flex ] ; then echo $(objdir)/../flex/flex ; else echo flex ; fi`
63LEXFLAGS =
64AR = ar
84LEXFLAGS =
85AR = ar
65OLDAR_FLAGS = qc
66AR_FLAGS = rc
86AR_FLAGS = rc
87LN = @symbolic_link@
88DLLTOOL = dlltool
67SHELL = /bin/sh
68# on sysV, define this as cp.
89SHELL = /bin/sh
90# on sysV, define this as cp.
69INSTALL = install -c
91INSTALL = @INSTALL@
92# Some systems may be missing symbolic links, regular links, or both.
93# Allow configure to check this and use "ln -s", "ln", or "cp" as appropriate.
94LN=@LN@
95LN_S=@LN_S@
70# These permit overriding just for certain files.
96# These permit overriding just for certain files.
71INSTALL_PROGRAM = $(INSTALL)
72INSTALL_DATA = $(INSTALL)
97INSTALL_PROGRAM = @INSTALL_PROGRAM@
98INSTALL_DATA = @INSTALL_DATA@
73MAKEINFO = makeinfo
99MAKEINFO = makeinfo
100MAKEINFOFLAGS =
74TEXI2DVI = texi2dvi
75# For GNUmake: let us decide what gets passed to recursive makes.
76MAKEOVERRIDES =
101TEXI2DVI = texi2dvi
102# For GNUmake: let us decide what gets passed to recursive makes.
103MAKEOVERRIDES =
104@SET_MAKE@
77
78# Define this as & to perform parallel make on a Sequent.
79# Note that this has some bugs, and it seems currently necessary
80# to compile all the gen* files first by hand to avoid erroneous results.
81P =
82
83# How to invoke ranlib.
84RANLIB = ranlib

--- 7 unchanged lines hidden (view full) ---

92OLDCC = cc
93
94# CFLAGS for use with OLDCC, for compiling libgcc1.a.
95# NOTE: -O does not work on some Unix systems!
96CCLIBFLAGS = -O
97
98# Version of ar to use when compiling libgcc1.a.
99OLDAR = ar
105
106# Define this as & to perform parallel make on a Sequent.
107# Note that this has some bugs, and it seems currently necessary
108# to compile all the gen* files first by hand to avoid erroneous results.
109P =
110
111# How to invoke ranlib.
112RANLIB = ranlib

--- 7 unchanged lines hidden (view full) ---

120OLDCC = cc
121
122# CFLAGS for use with OLDCC, for compiling libgcc1.a.
123# NOTE: -O does not work on some Unix systems!
124CCLIBFLAGS = -O
125
126# Version of ar to use when compiling libgcc1.a.
127OLDAR = ar
128OLDAR_FLAGS = qc
100
101# Target to use when installing include directory. Either
102# install-headers-tar or install-headers-cpio.
129
130# Target to use when installing include directory. Either
131# install-headers-tar or install-headers-cpio.
103INSTALL_HEADERS_DIR = install-headers-tar
132INSTALL_HEADERS_DIR = @build_install_headers_dir@
104
105# Header files that are made available under the same name
106# to programs compiled with GCC.
107USER_H = $(srcdir)/ginclude/stdarg.h $(srcdir)/ginclude/stddef.h \
108 $(srcdir)/ginclude/varargs.h $(srcdir)/ginclude/va-alpha.h \
109 $(srcdir)/ginclude/va-h8300.h $(srcdir)/ginclude/va-i860.h \
110 $(srcdir)/ginclude/va-i960.h $(srcdir)/ginclude/va-mips.h \
133
134# Header files that are made available under the same name
135# to programs compiled with GCC.
136USER_H = $(srcdir)/ginclude/stdarg.h $(srcdir)/ginclude/stddef.h \
137 $(srcdir)/ginclude/varargs.h $(srcdir)/ginclude/va-alpha.h \
138 $(srcdir)/ginclude/va-h8300.h $(srcdir)/ginclude/va-i860.h \
139 $(srcdir)/ginclude/va-i960.h $(srcdir)/ginclude/va-mips.h \
111 $(srcdir)/ginclude/va-m88k.h $(srcdir)/ginclude/va-pa.h \
140 $(srcdir)/ginclude/va-m88k.h $(srcdir)/ginclude/va-mn10200.h \
141 $(srcdir)/ginclude/va-mn10300.h $(srcdir)/ginclude/va-pa.h \
112 $(srcdir)/ginclude/va-pyr.h $(srcdir)/ginclude/va-sparc.h \
113 $(srcdir)/ginclude/va-clipper.h $(srcdir)/ginclude/va-spur.h \
142 $(srcdir)/ginclude/va-pyr.h $(srcdir)/ginclude/va-sparc.h \
143 $(srcdir)/ginclude/va-clipper.h $(srcdir)/ginclude/va-spur.h \
144 $(srcdir)/ginclude/va-m32r.h $(srcdir)/ginclude/va-sh.h \
145 $(srcdir)/ginclude/va-v850.h $(srcdir)/ginclude/va-arc.h \
114 $(srcdir)/ginclude/iso646.h $(srcdir)/ginclude/va-ppc.h \
146 $(srcdir)/ginclude/iso646.h $(srcdir)/ginclude/va-ppc.h \
115 $(srcdir)/ginclude/proto.h $(EXTRA_HEADERS)
147 $(EXTRA_HEADERS) $(LANG_EXTRA_HEADERS) \
148 $(srcdir)/ginclude/proto.h $(srcdir)/ginclude/stdbool.h
116
117# Target to use whe installing assert.h. Some systems may
118# want to set this empty.
119INSTALL_ASSERT_H = install-assert-h
120
121# The GCC to use for compiling libgcc2.a, enquire, and libgcc1-test.
122# Usually the one we just built.
123# Don't use this as a dependency--use $(GCC_PASSES) or $(GCC_PARTS).
124GCC_FOR_TARGET = ./xgcc -B./
125
126# This is used instead of ALL_CFLAGS when compiling with GCC_FOR_TARGET.
127# It omits XCFLAGS, and specifies -B./.
128# It also specifies -I./include to find, e.g., stddef.h.
149
150# Target to use whe installing assert.h. Some systems may
151# want to set this empty.
152INSTALL_ASSERT_H = install-assert-h
153
154# The GCC to use for compiling libgcc2.a, enquire, and libgcc1-test.
155# Usually the one we just built.
156# Don't use this as a dependency--use $(GCC_PASSES) or $(GCC_PARTS).
157GCC_FOR_TARGET = ./xgcc -B./
158
159# This is used instead of ALL_CFLAGS when compiling with GCC_FOR_TARGET.
160# It omits XCFLAGS, and specifies -B./.
161# It also specifies -I./include to find, e.g., stddef.h.
129GCC_CFLAGS=$(INTERNAL_CFLAGS) $(X_CFLAGS) $(T_CFLAGS) $(CFLAGS) -I./include
162GCC_CFLAGS=$(INTERNAL_CFLAGS) $(X_CFLAGS) $(T_CFLAGS) $(CFLAGS) -I./include $(TCFLAGS)
130
163
131# Special flags for compiling enquire.
132# We disable optimization to make floating point more reliable.
133ENQUIRE_CFLAGS = -DNO_MEM -DNO_LONG_DOUBLE_IO -O0
134ENQUIRE_LDFLAGS = $(LDFLAGS)
135
136# Sed command to transform gcc to installed name. Overwritten by configure.
164# Sed command to transform gcc to installed name. Overwritten by configure.
137program_transform_name = -e s,x,x,
138program_transform_cross_name = -e s,^,$(target)-,
165program_transform_name = @program_transform_name@
166program_transform_cross_name = s,^,$(target_alias)-,
139
167
168build_canonical = @build_canonical@
169host_canonical = @host_canonical@
170
140# Tools to use when building a cross-compiler.
141# These are used because `configure' appends `cross-make'
142# to the makefile when making a cross-compiler.
143
171# Tools to use when building a cross-compiler.
172# These are used because `configure' appends `cross-make'
173# to the makefile when making a cross-compiler.
174
144TARGET_TOOLPREFIX = $(tooldir)/bin/
145AR_FOR_TARGET = $(TARGET_TOOLPREFIX)ar
175# Use the tools from the build tree, if they are available.
176
177# objdir is set by configure.
178objdir = @objdir@
179
180AR_FOR_TARGET = ` \
181 if [ -f $(objdir)/../binutils/ar ] ; then \
182 echo $(objdir)/../binutils/ar ; \
183 else \
184 if [ "$(host_canonical)" = "$(target)" ] ; then \
185 echo ar; \
186 else \
187 t='$(program_transform_name)'; echo ar | sed -e $$t ; \
188 fi; \
189 fi`
146AR_FOR_TARGET_FLAGS = rc
190AR_FOR_TARGET_FLAGS = rc
147RANLIB_FOR_TARGET = $(TARGET_TOOLPREFIX)ranlib
148RANLIB_TEST_FOR_TARGET = [ -f $(TARGET_TOOLPREFIX)ranlib ]
191RANLIB_FOR_TARGET = ` \
192 if [ -f $(objdir)/../binutils/ranlib ] ; then \
193 echo $(objdir)/../binutils/ranlib ; \
194 else \
195 if [ "$(host_canonical)" = "$(target)" ] ; then \
196 echo ranlib; \
197 else \
198 t='$(program_transform_name)'; echo ranlib | sed -e $$t ; \
199 fi; \
200 fi`
201RANLIB_TEST_FOR_TARGET = \
202 [ -f $(RANLIB_FOR_TARGET) ] \
203 || ( [ "$(host_canonical)" = "$(target)" ] \
204 && [ -f /usr/bin/ranlib -o -f /bin/ranlib ] )
149
205
206# We always act like a cross-compiler, even when we're
207# compiling native. This is because we want to use our own tools if
208# we can. We don't just set RANLIB to a complicated expression,
209# because the top level Makefile.in might override RANLIB_FOR_TARGET.
210# These are from the FSF file "cross-make".
211AR = $(AR_FOR_TARGET)
212AR_FLAGS = $(AR_FOR_TARGET_FLAGS)
213OLDAR = $(AR_FOR_TARGET)
214OLDAR_FLAGS = $(AR_FOR_TARGET_FLAGS)
215RANLIB = $(RANLIB_FOR_TARGET)
216RANLIB_TEST = $(RANLIB_TEST_FOR_TARGET)
217
150# Dir to search for system headers. Overridden by cross-make.
151SYSTEM_HEADER_DIR = /usr/include
152
153# Control whether to run fixproto.
154STMP_FIXPROTO = stmp-fixproto
155
156# Test to see whether <limits.h> exists in the system header files.
157LIMITS_H_TEST = [ -f $(SYSTEM_HEADER_DIR)/limits.h ]
158
159# There may be a premade insn-attrtab.c for this machine.
160# (You could rebuild it with genattrtab as usual, but it takes a long time.)
161# PREMADE_ATTRTAB is the file name of the file to use.
162# PREMADE_ATTRTAB_MD is the md file it corresponds to.
163PREMADE_ATTRTAB_MD = Makefile # Guaranteed not to cmp equal to md.
164PREMADE_ATTRTAB =
165
218# Dir to search for system headers. Overridden by cross-make.
219SYSTEM_HEADER_DIR = /usr/include
220
221# Control whether to run fixproto.
222STMP_FIXPROTO = stmp-fixproto
223
224# Test to see whether <limits.h> exists in the system header files.
225LIMITS_H_TEST = [ -f $(SYSTEM_HEADER_DIR)/limits.h ]
226
227# There may be a premade insn-attrtab.c for this machine.
228# (You could rebuild it with genattrtab as usual, but it takes a long time.)
229# PREMADE_ATTRTAB is the file name of the file to use.
230# PREMADE_ATTRTAB_MD is the md file it corresponds to.
231PREMADE_ATTRTAB_MD = Makefile # Guaranteed not to cmp equal to md.
232PREMADE_ATTRTAB =
233
166target= ... `configure' substitutes actual target name here.
167xmake_file= ... `configure' substitutes actual x- file name here.
168tmake_file= ... `configure' substitutes actual t- file name here.
169out_file= ... `configure' substitutes actual out file name here.
170out_object_file= ... `configure' substitutes actual out object file name here.
171md_file= ... `configure' substitutes actual md file name here.
172tm_file= ... `configure' substitutes actual tm file name here.
173build_xm_file= ... `configure' substitutes actual build xm- file name here.
174host_xm_file= ... `configure' substitutes actual host xm- file name here.
175lang_specs_files= ... `configure' substitutes actual lang spec file names here.
176lang_options_files= ... `configure' puts actual lang options file names here.
177version=`sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/' < $(srcdir)/version.c`
234target=@target@
235target_alias=@target_alias@
236xmake_file=@dep_host_xmake_file@
237tmake_file=@dep_tmake_file@
238out_file=$(srcdir)/config/@out_file@
239out_object_file=@out_object_file@
240md_file=$(srcdir)/config/@md_file@
241tm_file=@tm_file_list@
242build_xm_file=@build_xm_file_list@
243host_xm_file=@host_xm_file_list@
244lang_specs_files=@lang_specs_files@
245lang_options_files=@lang_options_files@
246GCC_THREAD_FILE=@thread_file@
247GTHREAD_FLAGS=@gthread_flags@
248# Be prepared for gcc2 merges.
249gcc_version=@gcc_version@
250gcc_version_trigger=@gcc_version_trigger@
251version=$(gcc_version)
178mainversion=`sed -e 's/.*\"\([0-9]*\.[0-9]*\).*/\1/' < $(srcdir)/version.c`
179
252mainversion=`sed -e 's/.*\"\([0-9]*\.[0-9]*\).*/\1/' < $(srcdir)/version.c`
253
180# Directory where sources are, from where we are.
181srcdir = .
182# Common prefix for installation directories.
183# NOTE: This directory must exist when you start installation.
254# Common prefix for installation directories.
255# NOTE: This directory must exist when you start installation.
184prefix = /usr/local
256prefix = @prefix@
185# Directory in which to put localized header files. On the systems with
186# gcc as the native cc, `local_prefix' may not be `prefix' which is
187# `/usr'.
188# NOTE: local_prefix *should not* default from prefix.
257# Directory in which to put localized header files. On the systems with
258# gcc as the native cc, `local_prefix' may not be `prefix' which is
259# `/usr'.
260# NOTE: local_prefix *should not* default from prefix.
189local_prefix = /usr/local
261local_prefix = @local_prefix@
190# Directory in which to put host dependent programs and libraries
262# Directory in which to put host dependent programs and libraries
191exec_prefix = $(prefix)
263exec_prefix = @exec_prefix@
192# Directory in which to put the executable for the command `gcc'
264# Directory in which to put the executable for the command `gcc'
193bindir = $(exec_prefix)/bin
265bindir = @bindir@
194# Directory in which to put the directories used by the compiler.
266# Directory in which to put the directories used by the compiler.
195libdir = $(exec_prefix)/lib
267libdir = @libdir@
196# Directory in which the compiler finds executables, libraries, etc.
268# Directory in which the compiler finds executables, libraries, etc.
197libsubdir = $(libdir)/gcc-lib/$(target)/$(version)
269libsubdir = $(libdir)/gcc-lib/$(target_alias)/$(version)
198# Directory in which the compiler finds g++ includes.
270# Directory in which the compiler finds g++ includes.
199gxx_include_dir= $(libdir)/g++-include
271gxx_include_dir= @gxx_include_dir@
272# Directory in which the old g++ header files may be found.
273# The reason we use $(libdir)/g++-include rather than using libsubdir
274# is for compatibility with older versions of libg++.
275old_gxx_include_dir= $(libdir)/g++-include
200# Directory to search for site-specific includes.
201includedir = $(local_prefix)/include
202# assertdir is overridden in cross-make.
203# (But this currently agrees with what is in cross-make.)
204assertdir = $(tooldir)/include
205# where the info files go
276# Directory to search for site-specific includes.
277includedir = $(local_prefix)/include
278# assertdir is overridden in cross-make.
279# (But this currently agrees with what is in cross-make.)
280assertdir = $(tooldir)/include
281# where the info files go
206infodir = $(prefix)/info
282infodir = @infodir@
283# Where cpp should go besides $prefix/bin if necessary
284cpp_install_dir = @cpp_install_dir@
207# Extension (if any) to put in installed man-page filename.
208manext = .1
209objext = .o
285# Extension (if any) to put in installed man-page filename.
286manext = .1
287objext = .o
210exeext =
288exeext = @host_exeext@
289build_exeext = @build_exeext@
211
212# Directory in which to put man pages.
290
291# Directory in which to put man pages.
213mandir = $(prefix)/man/man1
292mandir = @mandir@/man1
214# Directory in which to find other cross-compilation tools and headers.
215# Used in install-cross.
293# Directory in which to find other cross-compilation tools and headers.
294# Used in install-cross.
216tooldir = $(exec_prefix)/$(target)
295tooldir = $(exec_prefix)/$(target_alias)
217# Dir for temp files.
218tmpdir = /tmp
219
220# Additional system libraries to link with.
221CLIB=
222
223# Change this to a null string if obstacks are installed in the
224# system library.
225OBSTACK=obstack.o
226
296# Dir for temp files.
297tmpdir = /tmp
298
299# Additional system libraries to link with.
300CLIB=
301
302# Change this to a null string if obstacks are installed in the
303# system library.
304OBSTACK=obstack.o
305
306# Configure will set these if you need vfprintf and possibly _doprnt support.
307VFPRINTF=@vfprintf@
308DOPRINT=@doprint@
309
227# Specify the rule for actually making libgcc.a,
228LIBGCC = libgcc.a
229# and the rule for installing it.
230INSTALL_LIBGCC = install-libgcc
231
232# Specify the rule for actually making libgcc1.a.
233# The value may be empty; that means to do absolutely nothing
234# with or for libgcc1.a.

--- 5 unchanged lines hidden (view full) ---

240
241# Specify the rule for actually making libgcc2.a.
242LIBGCC2 = libgcc2.a
243
244# Options to use when compiling libgcc2.a.
245# -g1 causes output of debug info only for file-scope entities.
246# we use this here because that should be enough, and also
247# so that -g1 will be tested.
310# Specify the rule for actually making libgcc.a,
311LIBGCC = libgcc.a
312# and the rule for installing it.
313INSTALL_LIBGCC = install-libgcc
314
315# Specify the rule for actually making libgcc1.a.
316# The value may be empty; that means to do absolutely nothing
317# with or for libgcc1.a.

--- 5 unchanged lines hidden (view full) ---

323
324# Specify the rule for actually making libgcc2.a.
325LIBGCC2 = libgcc2.a
326
327# Options to use when compiling libgcc2.a.
328# -g1 causes output of debug info only for file-scope entities.
329# we use this here because that should be enough, and also
330# so that -g1 will be tested.
248LIBGCC2_CFLAGS = -O2 $(LIBGCC2_INCLUDES) $(GCC_CFLAGS) $(TARGET_LIBGCC2_CFLAGS) -g1 -g0
331#
332LIBGCC2_DEBUG_CFLAGS = -g1
333LIBGCC2_CFLAGS = -O2 $(LIBGCC2_INCLUDES) $(GCC_CFLAGS) $(TARGET_LIBGCC2_CFLAGS) $(LIBGCC2_DEBUG_CFLAGS) $(GTHREAD_FLAGS) -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED @inhibit_libc@
249
250# Additional options to use when compiling libgcc2.a.
251# Some targets override this to -Iinclude
252LIBGCC2_INCLUDES =
253
254# Additional target-dependent options for compiling libgcc2.a.
255TARGET_LIBGCC2_CFLAGS =
256
257# Things which must be built before building libgcc2.a.
258# Some targets override this to stmp-int-hdrs
259LIBGCC2_DEPS =
260
334
335# Additional options to use when compiling libgcc2.a.
336# Some targets override this to -Iinclude
337LIBGCC2_INCLUDES =
338
339# Additional target-dependent options for compiling libgcc2.a.
340TARGET_LIBGCC2_CFLAGS =
341
342# Things which must be built before building libgcc2.a.
343# Some targets override this to stmp-int-hdrs
344LIBGCC2_DEPS =
345
261# Enquire target (This is a variable so that a target can choose not to
262# build it.)
263ENQUIRE = enquire
264
265# libgcc1-test target (must also be overridable for a target)
266LIBGCC1_TEST = libgcc1-test
267
268# List of extra executables that should be compiled for this target machine
269# that are used for compiling from source code to object code.
270# The rules for compiling them should be in the t-* file for the machine.
346# libgcc1-test target (must also be overridable for a target)
347LIBGCC1_TEST = libgcc1-test
348
349# List of extra executables that should be compiled for this target machine
350# that are used for compiling from source code to object code.
351# The rules for compiling them should be in the t-* file for the machine.
271EXTRA_PASSES =
352EXTRA_PASSES =@extra_passes@
272
273# Like EXTRA_PASSES, but these are used when linking.
353
354# Like EXTRA_PASSES, but these are used when linking.
274EXTRA_PROGRAMS =
355EXTRA_PROGRAMS = @extra_programs@
275
276# List of extra object files that should be compiled for this target machine.
277# The rules for compiling them should be in the t-* file for the machine.
356
357# List of extra object files that should be compiled for this target machine.
358# The rules for compiling them should be in the t-* file for the machine.
278EXTRA_PARTS =
359EXTRA_PARTS = @extra_parts@
279
280# List of extra object files that should be compiled and linked with
281# compiler proper (cc1, cc1obj, cc1plus).
360
361# List of extra object files that should be compiled and linked with
362# compiler proper (cc1, cc1obj, cc1plus).
282EXTRA_OBJS =
363EXTRA_OBJS = @extra_objs@
283
284# List of extra object files that should be compiled and linked with
285# the gcc driver.
364
365# List of extra object files that should be compiled and linked with
366# the gcc driver.
286EXTRA_GCC_OBJS =
367EXTRA_GCC_OBJS =@host_extra_gcc_objs@
287
288# List of additional header files to install.
289# Often this is edited directly by `configure'.
368
369# List of additional header files to install.
370# Often this is edited directly by `configure'.
290EXTRA_HEADERS =
371EXTRA_HEADERS =@extra_headers_list@
291
372
292# Set this to `ld' to enable use of collect2.
293# USE_COLLECT2 =
373# Set this to `collect2' to enable use of collect2.
374USE_COLLECT2 = @will_use_collect2@
375MAYBE_USE_COLLECT2 = @maybe_use_collect2@
294# It is convenient for configure to add the assignment at the beginning,
295# so don't override it here.
376# It is convenient for configure to add the assignment at the beginning,
377# so don't override it here.
378USE_COLLECT2 = collect2$(exeext)
296
297# List of extra C and assembler files to add to libgcc1.a.
298# Assembler files should have names ending in `.asm'.
299LIB1FUNCS_EXTRA =
300
301# List of extra C and assembler files to add to libgcc2.a.
302# Assembler files should have names ending in `.asm'.
303LIB2FUNCS_EXTRA =
304
379
380# List of extra C and assembler files to add to libgcc1.a.
381# Assembler files should have names ending in `.asm'.
382LIB1FUNCS_EXTRA =
383
384# List of extra C and assembler files to add to libgcc2.a.
385# Assembler files should have names ending in `.asm'.
386LIB2FUNCS_EXTRA =
387
388# Handle cpp installation.
389INSTALL_CPP=
390UNINSTALL_CPP=
391
305# Default float.h source to use for cross-compiler.
392# Default float.h source to use for cross-compiler.
306CROSS_FLOAT_H=float.h-cross
393# This is overridden by configure.
394CROSS_FLOAT_H=$(srcdir)/config/float-@float_format@.h
307
395
396# We do not try to build float.h anymore. Let configure select the
397# appropriate pre-built float.h file for the target.
398FLOAT_H=$(srcdir)/config/float-@float_format@.h
399
308# Program to convert libraries.
309LIBCONVERT =
310
311# Control whether header files are installed.
312INSTALL_HEADERS=install-headers
313
314# Options for tar when copying trees. So HPUX can override it.
315TAROUTOPTS = xpBf
316
317# Select which version of fixincludes to use (I.E. regular versus SVR4)
318# This value is overridden directly by configure.
400# Program to convert libraries.
401LIBCONVERT =
402
403# Control whether header files are installed.
404INSTALL_HEADERS=install-headers
405
406# Options for tar when copying trees. So HPUX can override it.
407TAROUTOPTS = xpBf
408
409# Select which version of fixincludes to use (I.E. regular versus SVR4)
410# This value is overridden directly by configure.
319FIXINCLUDES=fixincludes
411FIXINCLUDES = @fixincludes@
320
321# Additional directories of header files to run fixincludes on.
322# These should be directories searched automatically by default
323# just as /usr/include is.
324# *Do not* use this for directories that happen to contain
325# header files, but are not searched automatically by default.
326# On most systems, this is empty.
327OTHER_FIXINCLUDES_DIRS=
328
412
413# Additional directories of header files to run fixincludes on.
414# These should be directories searched automatically by default
415# just as /usr/include is.
416# *Do not* use this for directories that happen to contain
417# header files, but are not searched automatically by default.
418# On most systems, this is empty.
419OTHER_FIXINCLUDES_DIRS=
420
421# A list of all the language-specific executables.
422# This is overridden by configure.
423COMPILERS = cc1$(exeext) @all_compilers@
424
329# List of things which should already be built whenever we try to use xgcc
330# to compile anything (without linking).
425# List of things which should already be built whenever we try to use xgcc
426# to compile anything (without linking).
331GCC_PASSES=xgcc cc1 cpp $(EXTRA_PASSES)
427GCC_PASSES=xgcc$(exeext) cc1$(exeext) cpp$(exeext) $(EXTRA_PASSES)
332
333# List of things which should already be built whenever we try to use xgcc
334# to link anything.
335GCC_PARTS=$(GCC_PASSES) $(LIBGCC) $(EXTRA_PROGRAMS) $(USE_COLLECT2) $(EXTRA_PARTS)
336
337# Directory to link to, when using the target `maketest'.
338DIR = ../gcc
339

--- 13 unchanged lines hidden (view full) ---

353HOST_CC=$(CC)
354HOST_CFLAGS=$(ALL_CFLAGS)
355HOST_CLIB=$(CLIB)
356HOST_LDFLAGS=$(LDFLAGS)
357HOST_CPPFLAGS=$(ALL_CPPFLAGS)
358HOST_ALLOCA=$(ALLOCA)
359HOST_MALLOC=$(MALLOC)
360HOST_OBSTACK=$(OBSTACK)
428
429# List of things which should already be built whenever we try to use xgcc
430# to link anything.
431GCC_PARTS=$(GCC_PASSES) $(LIBGCC) $(EXTRA_PROGRAMS) $(USE_COLLECT2) $(EXTRA_PARTS)
432
433# Directory to link to, when using the target `maketest'.
434DIR = ../gcc
435

--- 13 unchanged lines hidden (view full) ---

449HOST_CC=$(CC)
450HOST_CFLAGS=$(ALL_CFLAGS)
451HOST_CLIB=$(CLIB)
452HOST_LDFLAGS=$(LDFLAGS)
453HOST_CPPFLAGS=$(ALL_CPPFLAGS)
454HOST_ALLOCA=$(ALLOCA)
455HOST_MALLOC=$(MALLOC)
456HOST_OBSTACK=$(OBSTACK)
457HOST_VFPRINTF=$(VFPRINTF)
458HOST_DOPRINT=$(DOPRINT)
361
362# Actual name to use when installing a native compiler.
459
460# Actual name to use when installing a native compiler.
363GCC_INSTALL_NAME = `t='$(program_transform_name)'; echo gcc | sed $$t`
461GCC_INSTALL_NAME = `t='$(program_transform_name)'; echo gcc | sed -e $$t`
462PROTOIZE_INSTALL_NAME = `t='$(program_transform_name)'; echo protoize | sed -e $$t`
463UNPROTOIZE_INSTALL_NAME = `t='$(program_transform_name)'; echo unprotoize | sed -e $$t`
364
365# Actual name to use when installing a cross-compiler.
464
465# Actual name to use when installing a cross-compiler.
366GCC_CROSS_NAME = `t='$(program_transform_cross_name)'; echo gcc | sed $$t`
466GCC_CROSS_NAME = `t='$(program_transform_cross_name)'; echo gcc | sed -e $$t`
467PROTOIZE_CROSS_NAME = `t='$(program_transform_cross_name)'; echo protoize | sed -e $$t`
468UNPROTOIZE_CROSS_NAME = `t='$(program_transform_cross_name)'; echo unprotoize | sed -e $$t`
367
368# Choose the real default target.
369ALL=all.internal
370
371# Choose the real install target.
372INSTALL_TARGET=install-normal
373
469
470# Choose the real default target.
471ALL=all.internal
472
473# Choose the real install target.
474INSTALL_TARGET=install-normal
475
374# Source for float.h. Overridden by cross-make.
375FLOAT_H=float.h-nat
476# Setup the testing framework, if you have one
477EXPECT = `if [ -f $${rootme}/../expect/expect ] ; then \
478 echo $${rootme}/../expect/expect ; \
479 else echo expect ; fi`
376
480
481RUNTEST = `if [ -f $${srcdir}/../dejagnu/runtest ] ; then \
482 echo $${srcdir}/../dejagnu/runtest ; \
483 else echo runtest; fi`
484RUNTESTFLAGS =
485
377# Extra symbols for fixproto to define when parsing headers.
378FIXPROTO_DEFINES =
379
380# Extra flags to use when compiling crt{begin,end}.o.
381CRTSTUFF_T_CFLAGS =
382
486# Extra symbols for fixproto to define when parsing headers.
487FIXPROTO_DEFINES =
488
489# Extra flags to use when compiling crt{begin,end}.o.
490CRTSTUFF_T_CFLAGS =
491
492# Extra flags to use when compiling [m]crt0.o.
493CRT0STUFF_T_CFLAGS =
494
495# "t" or nothing, for building multilibbed versions of, say, crtbegin.o.
496T =
497
383# End of variables for you to override.
384
385# Definition of `all' is here so that new rules inserted by sed
386# do not specify the default target.
387# The real definition is under `all.internal' (for native compilers)
388# or `all.cross' (for cross compilers).
389all: all.indirect
390
391# This tells GNU Make version 3 not to put all variables in the environment.
392.NOEXPORT:
393
394# sed inserts variable overrides after the following line.
395####target overrides
498# End of variables for you to override.
499
500# Definition of `all' is here so that new rules inserted by sed
501# do not specify the default target.
502# The real definition is under `all.internal' (for native compilers)
503# or `all.cross' (for cross compilers).
504all: all.indirect
505
506# This tells GNU Make version 3 not to put all variables in the environment.
507.NOEXPORT:
508
509# sed inserts variable overrides after the following line.
510####target overrides
511@target_overrides@
512
396####host overrides
513####host overrides
514@host_overrides@
515
397####cross overrides
516####cross overrides
517@cross_defines@
518@cross_overrides@
519
398####build overrides
520####build overrides
399
521@build_overrides@
522#
400# Now figure out from those variables how to compile and link.
401
402all.indirect: $(ALL)
403
404# IN_GCC tells obstack.h that we are using gcc's <stddef.h> file.
405# ??? IN_GCC should be obsolete now.
523# Now figure out from those variables how to compile and link.
524
525all.indirect: $(ALL)
526
527# IN_GCC tells obstack.h that we are using gcc's <stddef.h> file.
528# ??? IN_GCC should be obsolete now.
406INTERNAL_CFLAGS = $(CROSS) -DIN_GCC
529INTERNAL_CFLAGS = $(CROSS) -DIN_GCC @extra_c_flags@
407
408# This is the variable actually used when we compile.
530
531# This is the variable actually used when we compile.
409ALL_CFLAGS = $(INTERNAL_CFLAGS) $(X_CFLAGS) $(T_CFLAGS) $(CFLAGS) $(XCFLAGS)
532ALL_CFLAGS = $(INTERNAL_CFLAGS) $(X_CFLAGS) $(T_CFLAGS) $(CFLAGS) $(XCFLAGS) \
533 @DEFS@ $(SCHED_CFLAGS)
410
411# Likewise.
412ALL_CPPFLAGS = $(CPPFLAGS) $(X_CPPFLAGS) $(T_CPPFLAGS)
413
414# Even if ALLOCA is set, don't use it if compiling with GCC.
534
535# Likewise.
536ALL_CPPFLAGS = $(CPPFLAGS) $(X_CPPFLAGS) $(T_CPPFLAGS)
537
538# Even if ALLOCA is set, don't use it if compiling with GCC.
415USE_ALLOCA= ` case "${CC}" in "${OLDCC}") echo "${ALLOCA}" ;; esac `
416USE_HOST_ALLOCA= ` case "${HOST_CC}"@"${HOST_ALLOCA}" in "${OLDCC}"@?*) echo ${HOST_PREFIX}${HOST_ALLOCA} ;; esac `
539USE_ALLOCA= ${ALLOCA}
540USE_HOST_ALLOCA= ` case "${HOST_ALLOCA}" in ?*) echo ${HOST_PREFIX}${HOST_ALLOCA} ;; esac `
417USE_HOST_MALLOC= ` case "${HOST_MALLOC}" in ?*) echo ${HOST_PREFIX}${HOST_MALLOC} ;; esac `
418USE_HOST_OBSTACK= ` case "${HOST_OBSTACK}" in ?*) echo ${HOST_PREFIX}${HOST_OBSTACK} ;; esac `
541USE_HOST_MALLOC= ` case "${HOST_MALLOC}" in ?*) echo ${HOST_PREFIX}${HOST_MALLOC} ;; esac `
542USE_HOST_OBSTACK= ` case "${HOST_OBSTACK}" in ?*) echo ${HOST_PREFIX}${HOST_OBSTACK} ;; esac `
543USE_HOST_VFPRINTF= ` case "${HOST_VFPRINTF}" in ?*) echo ${HOST_PREFIX}${HOST_VFPRINTF} ;; esac `
544USE_HOST_DOPRINT= ` case "${HOST_DOPRINT}" in ?*) echo ${HOST_PREFIX}${HOST_DOPRINT} ;; esac `
419
420# Dependency on obstack, alloca, malloc or whatever library facilities
421# are not installed in the system libraries.
422# We don't use USE_ALLOCA because backquote expansion doesn't work in deps.
545
546# Dependency on obstack, alloca, malloc or whatever library facilities
547# are not installed in the system libraries.
548# We don't use USE_ALLOCA because backquote expansion doesn't work in deps.
423LIBDEPS= $(OBSTACK) $(ALLOCA) $(MALLOC)
549LIBDEPS= $(OBSTACK) $(ALLOCA) $(MALLOC) $(VFPRINTF) $(DOPRINT)
424
425# Likewise, for use in the tools that must run on this machine
426# even if we are cross-building GCC.
427# We don't use USE_ALLOCA because backquote expansion doesn't work in deps.
550
551# Likewise, for use in the tools that must run on this machine
552# even if we are cross-building GCC.
553# We don't use USE_ALLOCA because backquote expansion doesn't work in deps.
428HOST_LIBDEPS= $(HOST_PREFIX)$(HOST_OBSTACK) $(HOST_PREFIX)$(HOST_ALLOCA) $(HOST_PREFIX)$(HOST_MALLOC)
554HOST_LIBDEPS= $(HOST_PREFIX)$(HOST_OBSTACK) $(HOST_PREFIX)$(HOST_ALLOCA) $(HOST_PREFIX)$(HOST_MALLOC) $(HOST_PREFIX)$(HOST_VFPRINTF) $(HOST_PREFIX)$(HOST_DOPRINT)
429
430# How to link with both our special library facilities
431# and the system's installed libraries.
555
556# How to link with both our special library facilities
557# and the system's installed libraries.
432LIBS = $(OBSTACK) $(USE_ALLOCA) $(MALLOC) $(CLIB)
558LIBS = $(OBSTACK) $(USE_ALLOCA) $(MALLOC) $(VFPRINTF) $(DOPRINT) $(CLIB)
433
434# Likewise, for use in the tools that must run on this machine
435# even if we are cross-building GCC.
436HOST_LIBS = $(USE_HOST_OBSTACK) $(USE_HOST_ALLOCA) $(USE_HOST_MALLOC) \
559
560# Likewise, for use in the tools that must run on this machine
561# even if we are cross-building GCC.
562HOST_LIBS = $(USE_HOST_OBSTACK) $(USE_HOST_ALLOCA) $(USE_HOST_MALLOC) \
437 $(HOST_CLIB)
563 $(USE_HOST_VFPRINTF) $(USE_HOST_DOPRINT) $(HOST_CLIB)
438
564
439HOST_RTL = $(HOST_PREFIX)rtl.o
565HOST_RTL = $(HOST_PREFIX)rtl.o $(HOST_PREFIX)bitmap.o
440HOST_RTLANAL = $(HOST_PREFIX)rtlanal.o
441HOST_PRINT = $(HOST_PREFIX)print-rtl.o
442
443# Specify the directories to be searched for header files.
444# Both . and srcdir are used, in that order,
445# so that tm.h and config.h will be found in the compilation
446# subdirectory rather than in the source directory.
447INCLUDES = -I. -I$(srcdir) -I$(srcdir)/config
448
449# Always use -I$(srcdir)/config when compiling.
450.c.o:
451 $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $<
452
453# This tells GNU make version 3 not to export all the variables
454# defined in this file into the environment.
455.NOEXPORT:
566HOST_RTLANAL = $(HOST_PREFIX)rtlanal.o
567HOST_PRINT = $(HOST_PREFIX)print-rtl.o
568
569# Specify the directories to be searched for header files.
570# Both . and srcdir are used, in that order,
571# so that tm.h and config.h will be found in the compilation
572# subdirectory rather than in the source directory.
573INCLUDES = -I. -I$(srcdir) -I$(srcdir)/config
574
575# Always use -I$(srcdir)/config when compiling.
576.c.o:
577 $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $<
578
579# This tells GNU make version 3 not to export all the variables
580# defined in this file into the environment.
581.NOEXPORT:
456
582#
457# Support for additional languages (other than c and objc).
458# ??? objc can be supported this way too (leave for later).
459
460# These next lines are overridden by configure.
583# Support for additional languages (other than c and objc).
584# ??? objc can be supported this way too (leave for later).
585
586# These next lines are overridden by configure.
461LANG_MAKEFILES =
462LANG_STAGESTUFF =
463LANG_DIFF_EXCLUDES =
587LANG_MAKEFILES = @all_lang_makefiles@
588LANG_STAGESTUFF = @all_stagestuff@
589LANG_DIFF_EXCLUDES = @all_diff_excludes@
590LANG_LIB2FUNCS = @all_lib2funcs@
591LANG_EXTRA_HEADERS = @all_headers@
464
465# Flags to pass to recursive makes.
466# CC is set by configure. Hosts without symlinks need special handling
467# because we need CC="stage1/xgcc -Bstage1/" to work in the language
468# subdirectories.
469# ??? The choices here will need some experimenting with.
470FLAGS_TO_PASS = \
592
593# Flags to pass to recursive makes.
594# CC is set by configure. Hosts without symlinks need special handling
595# because we need CC="stage1/xgcc -Bstage1/" to work in the language
596# subdirectories.
597# ??? The choices here will need some experimenting with.
598FLAGS_TO_PASS = \
471 "AR_FLAGS=$(AR_FLAGS)" \
599 "AR_FLAGS=$(AR_FOR_TARGET_FLAGS)" \
472 "AR_FOR_TARGET=$(AR_FOR_TARGET)" \
473 "BISON=$(BISON)" \
474 "BISONFLAGS=$(BISONFLAGS)" \
600 "AR_FOR_TARGET=$(AR_FOR_TARGET)" \
601 "BISON=$(BISON)" \
602 "BISONFLAGS=$(BISONFLAGS)" \
475 "CC=set-by-configure" \
603 "CC=@cc_set_by_configure@" \
476 "CFLAGS=$(CFLAGS)" \
604 "CFLAGS=$(CFLAGS)" \
605 "CLIB=$(CLIB)" \
477 "GCC_FOR_TARGET=$(GCC_FOR_TARGET)" \
478 "LDFLAGS=$(LDFLAGS)" \
479 "LEX=$(LEX)" \
480 "LEXFLAGS=$(LEXFLAGS)" \
606 "GCC_FOR_TARGET=$(GCC_FOR_TARGET)" \
607 "LDFLAGS=$(LDFLAGS)" \
608 "LEX=$(LEX)" \
609 "LEXFLAGS=$(LEXFLAGS)" \
610 "LN=$(LN)" \
611 "LN_S=$(LN_S)" \
481 "MAKEINFO=$(MAKEINFO)" \
482 "MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
483 "RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
484 "RANLIB_TEST_FOR_TARGET=$(RANLIB_TEST_FOR_TARGET)" \
485 "SHELL=$(SHELL)" \
612 "MAKEINFO=$(MAKEINFO)" \
613 "MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
614 "RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
615 "RANLIB_TEST_FOR_TARGET=$(RANLIB_TEST_FOR_TARGET)" \
616 "SHELL=$(SHELL)" \
617 "STAGE_PREFIX=@stage_prefix_set_by_configure@" \
486 "exeext=$(exeext)" \
618 "exeext=$(exeext)" \
619 "build_exeext=$(build_exeext)" \
487 "objext=$(objext)" \
488 "exec_prefix=$(exec_prefix)" \
489 "prefix=$(prefix)" \
620 "objext=$(objext)" \
621 "exec_prefix=$(exec_prefix)" \
622 "prefix=$(prefix)" \
623 "local_prefix=$(local_prefix)" \
624 "gxx_include_dir=$(gxx_include_dir)" \
490 "tooldir=$(tooldir)" \
491 "bindir=$(bindir)" \
492 "libsubdir=$(libsubdir)"
625 "tooldir=$(tooldir)" \
626 "bindir=$(bindir)" \
627 "libsubdir=$(libsubdir)"
493
628#
494# Lists of files for various purposes.
495
629# Lists of files for various purposes.
630
496# A list of all the language-specific executables.
497# This is overridden by configure.
498COMPILERS = cc1$(exeext) cc1obj$(exeext)
631# Language-specific object files for C and Objective C.
632C_AND_OBJC_OBJS = c-lex.o c-pragma.o c-decl.o c-typeck.o c-convert.o \
633 c-aux-info.o c-common.o c-iterate.o @extra_c_objs@
499
500# Language-specific object files for C.
634
635# Language-specific object files for C.
501C_OBJS = c-parse.o c-lang.o c-lex.o c-pragma.o \
502 c-decl.o c-typeck.o c-convert.o c-aux-info.o c-common.o c-iterate.o
636C_OBJS = c-parse.o c-lang.o $(C_AND_OBJC_OBJS)
503
637
504# Language-specific object files for Objective C.
505OBJC_OBJS = objc-parse.o objc-act.o c-lex.o c-pragma.o \
506 c-decl.o c-typeck.o c-convert.o c-aux-info.o c-common.o c-iterate.o
638SCHED_PREFIX = @sched_prefix@
639SCHED_CFLAGS = @sched_cflags@
507
640
508# Files specific to the C interpreter bytecode compiler(s).
509BC_OBJS = bc-emit.o bc-optab.o
510
511# Bytecode header files constructed at build time; vmsconfig.com wants this.
512BC_ALL = bc-arity.h bc-opcode.h bc-opname.h
513
514# Language-independent object files.
515OBJS = toplev.o version.o tree.o print-tree.o stor-layout.o fold-const.o \
641# Language-independent object files.
642OBJS = toplev.o version.o tree.o print-tree.o stor-layout.o fold-const.o \
516 function.o stmt.o expr.o calls.o expmed.o explow.o optabs.o varasm.o \
517 rtl.o print-rtl.o rtlanal.o emit-rtl.o real.o \
518 dbxout.o sdbout.o dwarfout.o xcoffout.o \
519 integrate.o jump.o cse.o loop.o unroll.o flow.o stupid.o combine.o \
520 regclass.o local-alloc.o global.o reload.o reload1.o caller-save.o \
521 insn-peep.o reorg.o sched.o final.o recog.o reg-stack.o \
643 function.o stmt.o except.o expr.o calls.o expmed.o explow.o optabs.o \
644 varasm.o rtl.o print-rtl.o rtlanal.o emit-rtl.o genrtl.o real.o regmove.o \
645 dbxout.o sdbout.o dwarfout.o dwarf2out.o xcoffout.o bitmap.o alias.o \
646 integrate.o jump.o cse.o loop.o unroll.o flow.o stupid.o combine.o varray.o \
647 regclass.o local-alloc.o global.o reload.o reload1.o caller-save.o gcse.o \
648 insn-peep.o reorg.o $(SCHED_PREFIX)sched.o final.o recog.o reg-stack.o \
522 insn-opinit.o insn-recog.o insn-extract.o insn-output.o insn-emit.o \
649 insn-opinit.o insn-recog.o insn-extract.o insn-output.o insn-emit.o \
523 insn-attrtab.o $(out_object_file) getpwd.o convert.o $(EXTRA_OBJS)
650 profile.o insn-attrtab.o $(out_object_file) getpwd.o $(EXTRA_OBJS) convert.o \
651 dyn-string.o
524
525# GEN files are listed separately, so they can be built before doing parallel
526# makes for cc1 or cc1plus. Otherwise sequent parallel make attempts to load
527# them before rtl.o is compiled.
652
653# GEN files are listed separately, so they can be built before doing parallel
654# makes for cc1 or cc1plus. Otherwise sequent parallel make attempts to load
655# them before rtl.o is compiled.
528GEN= genemit genoutput genrecog genextract genflags gencodes genconfig genpeep
656GEN= genemit genoutput genrecog genextract genflags gencodes genconfig \
657 genpeep gengenrtl gencheck
529
658
530CCCP=cccp
531# Uncomment this line if you want to use cppmain (w/cpplib) as cpp.
532#CCCP=cppmain
659CCCP=@cpp_main@
533
534# Files to be copied away after each stage in building.
535STAGESTUFF = *$(objext) insn-flags.h insn-config.h insn-codes.h \
536 insn-output.c insn-recog.c insn-emit.c insn-extract.c insn-peep.c \
660
661# Files to be copied away after each stage in building.
662STAGESTUFF = *$(objext) insn-flags.h insn-config.h insn-codes.h \
663 insn-output.c insn-recog.c insn-emit.c insn-extract.c insn-peep.c \
537 insn-attr.h insn-attrtab.c insn-opinit.c \
538 stamp-flags stamp-config stamp-codes \
539 stamp-output stamp-recog stamp-emit stamp-extract stamp-peep \
540 stamp-attr stamp-attrtab stamp-opinit stamp-proto stamp-crt stamp-crtS \
541 genemit$(exeext) genoutput$(exeext) genrecog$(exeext) genextract$(exeext) \
542 genflags$(exeext) gencodes$(exeext) genconfig$(exeext) genpeep$(exeext) \
543 genattrtab$(exeext) genattr$(exeext) genopinit$(exeext) \
544 $(BC_ALL) \
545 stamp-bcarity stamp-bcopcode stamp-bcopname \
546 bi-arity$(exeext) bi-opcode$(exeext) bi-opname$(exeext) \
547 $(GCC_PASSES) $(EXTRA_PARTS) $(EXTRA_PROGRAMS) gcc-cross$(exeext) \
664 insn-attr.h insn-attrtab.c insn-opinit.c genrtl.c genrtl.h tree-check.h \
665 s-flags s-config s-codes s-mlib s-under\
666 s-output s-recog s-emit s-extract s-peep s-check \
667 s-attr s-attrtab s-opinit s-crt s-crtS s-crt0 \
668 genemit$(build_exeext) genoutput$(build_exeext) genrecog$(build_exeext) \
669 genextract$(build_exeext) genflags$(build_exeext) gencodes$(build_exeext) \
670 genconfig$(build_exeext) genpeep$(build_exeext) genattrtab$(build_exeext) \
671 genattr$(build_exeext) genopinit$(build_exeext) gengenrtl$(build_exeext) \
672 gencheck$(build_exeext) \
673 xgcc$(exeext) cc1$(exeext) cpp$(exeext) $(EXTRA_PASSES) \
674 $(EXTRA_PARTS) $(EXTRA_PROGRAMS) gcc-cross$(exeext) \
548 $(CCCP)$(exeext) cc1obj$(exeext) enquire$(exeext) \
549 protoize$(exeext) unprotoize$(exeext) \
550 specs collect2$(exeext) $(USE_COLLECT2) underscore.c \
675 $(CCCP)$(exeext) cc1obj$(exeext) enquire$(exeext) \
676 protoize$(exeext) unprotoize$(exeext) \
677 specs collect2$(exeext) $(USE_COLLECT2) underscore.c \
678 gcov$(exeext) *.bp \
551 *.greg *.lreg *.combine *.flow *.cse *.jump *.rtl *.tree *.loop \
679 *.greg *.lreg *.combine *.flow *.cse *.jump *.rtl *.tree *.loop \
552 *.dbr *.jump2 *.sched *.cse2 *.sched2 *.stack \
680 *.dbr *.jump2 *.sched *.cse2 *.sched2 *.stack *.gcse \
553 *.[si] \
554 $(LANG_STAGESTUFF)
555
556# Members of libgcc1.a.
557LIB1FUNCS = _mulsi3 _udivsi3 _divsi3 _umodsi3 _modsi3 \
558 _lshrsi3 _ashrsi3 _ashlsi3 \
559 _divdf3 _muldf3 _negdf2 _adddf3 _subdf3 \
560 _fixdfsi _fixsfsi _floatsidf _floatsisf _truncdfsf2 _extendsfdf2 \
561 _addsf3 _negsf2 _subsf3 _mulsf3 _divsf3 \
562 _eqdf2 _nedf2 _gtdf2 _gedf2 _ltdf2 _ledf2 \
563 _eqsf2 _nesf2 _gtsf2 _gesf2 _ltsf2 _lesf2
564
565# Library members defined in libgcc2.c.
566LIB2FUNCS = _muldi3 _divdi3 _moddi3 _udivdi3 _umoddi3 _negdi2 \
567 _lshrdi3 _ashldi3 _ashrdi3 _ffsdi2 \
568 _udiv_w_sdiv _udivmoddi4 _cmpdi2 _ucmpdi2 _floatdidf _floatdisf \
569 _fixunsdfsi _fixunssfsi _fixunsdfdi _fixdfdi _fixunssfdi _fixsfdi \
570 _fixxfdi _fixunsxfdi _floatdixf _fixunsxfsi \
571 _fixtfdi _fixunstfdi _floatditf \
681 *.[si] \
682 $(LANG_STAGESTUFF)
683
684# Members of libgcc1.a.
685LIB1FUNCS = _mulsi3 _udivsi3 _divsi3 _umodsi3 _modsi3 \
686 _lshrsi3 _ashrsi3 _ashlsi3 \
687 _divdf3 _muldf3 _negdf2 _adddf3 _subdf3 \
688 _fixdfsi _fixsfsi _floatsidf _floatsisf _truncdfsf2 _extendsfdf2 \
689 _addsf3 _negsf2 _subsf3 _mulsf3 _divsf3 \
690 _eqdf2 _nedf2 _gtdf2 _gedf2 _ltdf2 _ledf2 \
691 _eqsf2 _nesf2 _gtsf2 _gesf2 _ltsf2 _lesf2
692
693# Library members defined in libgcc2.c.
694LIB2FUNCS = _muldi3 _divdi3 _moddi3 _udivdi3 _umoddi3 _negdi2 \
695 _lshrdi3 _ashldi3 _ashrdi3 _ffsdi2 \
696 _udiv_w_sdiv _udivmoddi4 _cmpdi2 _ucmpdi2 _floatdidf _floatdisf \
697 _fixunsdfsi _fixunssfsi _fixunsdfdi _fixdfdi _fixunssfdi _fixsfdi \
698 _fixxfdi _fixunsxfdi _floatdixf _fixunsxfsi \
699 _fixtfdi _fixunstfdi _floatditf \
572 __gcc_bcmp _varargs _eprintf _op_new _op_vnew _new_handler _op_delete \
573 _op_vdel _bb _shtab _clear_cache _trampoline __main _exit _ctors _eh \
574 _pure
700 __gcc_bcmp _varargs __dummy _eprintf \
701 _bb _shtab _clear_cache _trampoline __main _exit \
702 _ctors _pure
575
703
704LIB2FUNCS_EH = _eh
705
706FPBIT_FUNCS = _pack_sf _unpack_sf _addsub_sf _mul_sf _div_sf \
707 _fpcmp_parts_sf _compare_sf _eq_sf _ne_sf _gt_sf _ge_sf \
708 _lt_sf _le_sf _si_to_sf _sf_to_si _negate_sf _make_sf \
709 _sf_to_df
710
711DPBIT_FUNCS = _pack_df _unpack_df _addsub_df _mul_df _div_df \
712 _fpcmp_parts_df _compare_df _eq_df _ne_df _gt_df _ge_df \
713 _lt_df _le_df _si_to_df _df_to_si _negate_df _make_df \
714 _df_to_sf
715
576# The files that "belong" in CONFIG_H are deliberately omitted
577# because having them there would not be useful in actual practice.
578# All they would do is cause complete recompilation every time
579# one of the machine description files is edited.
580# That may or may not be what one wants to do.
581# If it is, rm *.o is an easy way to do it.
582# CONFIG_H = $(host_xm_file) $(tm_file)
583CONFIG_H =
716# The files that "belong" in CONFIG_H are deliberately omitted
717# because having them there would not be useful in actual practice.
718# All they would do is cause complete recompilation every time
719# one of the machine description files is edited.
720# That may or may not be what one wants to do.
721# If it is, rm *.o is an easy way to do it.
722# CONFIG_H = $(host_xm_file) $(tm_file)
723CONFIG_H =
584RTL_H = rtl.h rtl.def machmode.h machmode.def
585TREE_H = tree.h real.h tree.def machmode.h machmode.def
586BYTECODE_H = bytecode.h bc-emit.h bc-optab.h
587
724RTL_BASE_H = rtl.h rtl.def gansidecl.h machmode.h machmode.def
725RTL_H = $(RTL_BASE_H) genrtl.h
726TREE_H = tree.h real.h tree.def gansidecl.h machmode.h machmode.def tree-check.h
727BASIC_BLOCK_H = basic-block.h bitmap.h
728DEMANGLE_H = demangle.h gansidecl.h
729RECOG_H = recog.h gansidecl.h
730EXPR_H = expr.h insn-codes.h
731REGS_H = regs.h varray.h machmode.h machmode.def gansidecl.h
732#
588# Language makefile fragments.
589
590# The following targets define the interface between us and the languages.
591#
592# all.build, all.cross, start.encap, rest.encap,
593# info, dvi,
594# install-normal, install-common, install-info, install-man,
595# uninstall, distdir,
596# mostlyclean, clean, distclean, extraclean, maintainer-clean,
597# stage1, stage2, stage3, stage4
598#
599# Each language is linked in with a series of hooks (since we can't use `::'
600# targets). The name of each hooked is "lang.${target_name}" (eg: lang.info).
601# Configure computes and adds these here.
602
603####language hooks
733# Language makefile fragments.
734
735# The following targets define the interface between us and the languages.
736#
737# all.build, all.cross, start.encap, rest.encap,
738# info, dvi,
739# install-normal, install-common, install-info, install-man,
740# uninstall, distdir,
741# mostlyclean, clean, distclean, extraclean, maintainer-clean,
742# stage1, stage2, stage3, stage4
743#
744# Each language is linked in with a series of hooks (since we can't use `::'
745# targets). The name of each hooked is "lang.${target_name}" (eg: lang.info).
746# Configure computes and adds these here.
747
748####language hooks
749@language_hooks@
604
605# sed inserts language fragments after the following line.
606####language fragments
750
751# sed inserts language fragments after the following line.
752####language fragments
753@language_fragments@
607
608# End of language makefile fragments.
754
755# End of language makefile fragments.
609
610# Avoid a lot of time thinking about remaking Makefile.in and *.def.
611.SUFFIXES: .in .def
756#
757# The only suffixes we want for implicit rules are .c and .o, so clear
758# the list and add them. This speeds up GNU Make, and allows -r to work.
759.SUFFIXES:
760.SUFFIXES: .c .o
612
761
613Makefile: $(srcdir)/Makefile.in $(srcdir)/configure $(srcdir)/version.c \
614 $(srcdir)/config/$(xmake_file) $(srcdir)/config/$(tmake_file) \
615 $(LANG_MAKEFILES)
762Makefile: $(srcdir)/Makefile.in config.status $(srcdir)/version.c \
763 $(xmake_file) $(tmake_file) $(LANG_MAKEFILES)
764 $(SHELL) $(srcdir)/configure.frag $(srcdir) "$(SUBDIRS)" \
765 "$(xmake_file)" "$(tmake_file)"
616 cp config.status config.run
617 $(SHELL) config.run
618 rm -f config.run
619
766 cp config.status config.run
767 $(SHELL) config.run
768 rm -f config.run
769
770$(srcdir)/configure: $(srcdir)/configure.in
771 cd $(srcdir); autoconf
772
773# cstamp-h.in controls rebuilding of config.in.
774# It is named cstamp-h.in and not stamp-h.in so the mostlyclean rule doesn't
775# delete it. A stamp file is needed as autoheader won't update the file if
776# nothing has changed.
777# It remains in the source directory and is part of the distribution.
778# This follows what is done in shellutils, fileutils, etc.
779# "echo timestamp" is used instead of touch to be consistent with other
780# packages that use autoconf (??? perhaps also to avoid problems with patch?).
781# ??? Newer versions have a maintainer mode that may be useful here.
782$(srcdir)/config.in: $(srcdir)/cstamp-h.in
783$(srcdir)/cstamp-h.in: $(srcdir)/configure.in $(srcdir)/acconfig.h
784 cd $(srcdir) && autoheader
785 @rm -f $(srcdir)/cstamp-h.in
786 echo timestamp > $(srcdir)/cstamp-h.in
787auto-host.h: cstamp-h ; @true
788cstamp-h: config.in config.status
789 CONFIG_HEADERS=auto-host.h:config.in $(SHELL) config.status
790
791# Really, really stupid make features, such as SUN's KEEP_STATE, may force
792# a target to build even if it is up-to-date. So we must verify that
793# config.status does not exist before failing.
794config.status: configure version.c
795 @if [ ! -f config.status ] ; then \
796 echo You must configure gcc. Look at the INSTALL file for details.; \
797 false; \
798 else \
799 $(SHELL) config.status --recheck; \
800 fi
801
620all.internal: start.encap rest.encap
621# This is what to compile if making a cross-compiler.
622# Note that we can compile enquire using the cross-compiler just built,
623# although we can't run it on this machine.
802all.internal: start.encap rest.encap
803# This is what to compile if making a cross-compiler.
804# Note that we can compile enquire using the cross-compiler just built,
805# although we can't run it on this machine.
624all.cross: native gcc-cross specs stmp-headers $(LIBGCC) $(STMP_FIXPROTO) \
806all.cross: native gcc-cross specs stmp-headers $(STMP_FIXPROTO) $(LIBGCC) \
625 $(LIBGCC1_TEST) $(EXTRA_PARTS) lang.all.cross
626# This is what to compile if making gcc with a cross-compiler.
807 $(LIBGCC1_TEST) $(EXTRA_PARTS) lang.all.cross
808# This is what to compile if making gcc with a cross-compiler.
627all.build: native xgcc $(EXTRA_PARTS) lang.all.build
809all.build: native xgcc$(exeext) $(EXTRA_PARTS) lang.all.build
628# This is what must be made before installing GCC and converting libraries.
810# This is what must be made before installing GCC and converting libraries.
629start.encap: native xgcc specs $(LIBGCC1) xlimits.h lang.start.encap
811start.encap: native xgcc$(exeext) specs $(LIBGCC1) xlimits.h lang.start.encap
630# These can't be made until after GCC can run.
812# These can't be made until after GCC can run.
631rest.encap: stmp-headers $(LIBGCC) $(STMP_FIXPROTO) $(EXTRA_PARTS) lang.rest.encap
813rest.encap: stmp-headers $(STMP_FIXPROTO) $(LIBGCC) $(EXTRA_PARTS) lang.rest.encap
632# This is what is made with the host's compiler
633# whether making a cross compiler or not.
814# This is what is made with the host's compiler
815# whether making a cross compiler or not.
634native: config.status cpp $(LANGUAGES) $(EXTRA_PASSES) $(EXTRA_PROGRAMS) $(USE_COLLECT2)
816native: config.status auto-host.h cpp$(exeext) $(LANGUAGES) \
817 $(EXTRA_PASSES) $(EXTRA_PROGRAMS) $(USE_COLLECT2)
635
636# Define the names for selecting languages in LANGUAGES.
818
819# Define the names for selecting languages in LANGUAGES.
637C c: cc1
638OBJC objc: cc1obj objc-runtime
639OBJECTIVE-C objective-c: cc1obj objc-runtime
820C c: cc1$(exeext)
640PROTO: proto
641
642# Tell GNU make these are phony targets.
821PROTO: proto
822
823# Tell GNU make these are phony targets.
643.PHONY: C c OBJC objc OBJECTIVE-C objective-c PROTO proto
824.PHONY: C c PROTO proto
644
825
645# Really, really stupid make features, such as SUN's KEEP_STATE, may force
646# a target to build even if it is up-to-date. So we must verify that
647# config.status does not exist before failing.
648config.status:
649 @if [ ! -f config.status ] ; then \
650 echo You must configure gcc. Look at the INSTALL file for details.; \
651 false; \
652 else \
653 true; \
654 fi
655
656# On the target machine, finish building a cross compiler.
657# This does the things that can't be done on the host machine.
658rest.cross: $(LIBGCC) gfloat.h specs
659
660# Verify that it works to compile and link libgcc1-test.
661# If it does, then there are sufficient replacements for libgcc1.a.
662libgcc1-test: libgcc1-test.o native $(GCC_PARTS)
663 @echo "Testing libgcc1. Ignore linker warning messages."
664 $(GCC_FOR_TARGET) $(GCC_CFLAGS) libgcc1-test.o -o libgcc1-test \
665 -nostartfiles -nostdlib `$(GCC_FOR_TARGET) --print-libgcc-file-name`
826# On the target machine, finish building a cross compiler.
827# This does the things that can't be done on the host machine.
828rest.cross: $(LIBGCC) gfloat.h specs
829
830# Verify that it works to compile and link libgcc1-test.
831# If it does, then there are sufficient replacements for libgcc1.a.
832libgcc1-test: libgcc1-test.o native $(GCC_PARTS)
833 @echo "Testing libgcc1. Ignore linker warning messages."
834 $(GCC_FOR_TARGET) $(GCC_CFLAGS) libgcc1-test.o -o libgcc1-test \
835 -nostartfiles -nostdlib `$(GCC_FOR_TARGET) --print-libgcc-file-name`
666libgcc1-test.o: libgcc1-test.c native xgcc
836libgcc1-test.o: libgcc1-test.c native xgcc$(exeext)
667 $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) -c $(srcdir)/libgcc1-test.c
668
669# Recompile all the language-independent object files.
670# This is used only if the user explicitly asks for it.
671compilations: ${OBJS}
672
673# Create a list of the language-independent object files so the language
674# subdirectories needn't mention their names explicitly.
837 $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) -c $(srcdir)/libgcc1-test.c
838
839# Recompile all the language-independent object files.
840# This is used only if the user explicitly asks for it.
841compilations: ${OBJS}
842
843# Create a list of the language-independent object files so the language
844# subdirectories needn't mention their names explicitly.
675stamp-objlist: Makefile $(OBJS) $(BC_OBJS)
676 echo " $(OBJS) $(BC_OBJS)" | sed -e 's, \([a-z]\), ../\1,g' -e 's/\.o/$(objext)/g' >stamp-objlist
845stamp-objlist: $(OBJS)
846 echo " $(OBJS)" | sed -e 's, \([a-z0-9]\), ../\1,g' -e 's/\.o/$(objext)/g' >stamp-objlist
677
678# We call this executable `xgcc' rather than `gcc'
679# to avoid confusion if the current directory is in the path
680# and CC is `gcc'. It is renamed to `gcc' when it is installed.
847
848# We call this executable `xgcc' rather than `gcc'
849# to avoid confusion if the current directory is in the path
850# and CC is `gcc'. It is renamed to `gcc' when it is installed.
681xgcc: gcc.o version.o $(LIBDEPS) $(EXTRA_GCC_OBJS)
682 $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ gcc.o version.o $(EXTRA_GCC_OBJS) $(LIBS)
851xgcc$(exeext): gcc.o version.o choose-temp.o pexecute.o prefix.o version.o \
852 mkstemp.o $(LIBDEPS) $(EXTRA_GCC_OBJS)
853 $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ gcc.o prefix.o version.o \
854 choose-temp.o pexecute.o mkstemp.o $(EXTRA_GCC_OBJS) $(LIBS)
683
684# Dump a specs file to make -B./ read these specs over installed ones.
855
856# Dump a specs file to make -B./ read these specs over installed ones.
685specs: xgcc
857specs: xgcc$(exeext)
686 $(GCC_FOR_TARGET) -dumpspecs > tmp-specs
687 mv tmp-specs specs
688
689# We do want to create an executable named `xgcc', so we can use it to
690# compile libgcc2.a.
691# Also create gcc-cross, so that install-common will install properly.
858 $(GCC_FOR_TARGET) -dumpspecs > tmp-specs
859 mv tmp-specs specs
860
861# We do want to create an executable named `xgcc', so we can use it to
862# compile libgcc2.a.
863# Also create gcc-cross, so that install-common will install properly.
692gcc-cross: xgcc
864gcc-cross: xgcc$(exeext)
693 cp xgcc$(exeext) gcc-cross$(exeext)
694
865 cp xgcc$(exeext) gcc-cross$(exeext)
866
695cc1: $(P) $(C_OBJS) $(OBJS) $(BC_OBJS) $(LIBDEPS)
696 $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ $(C_OBJS) $(OBJS) $(BC_OBJS) $(LIBS)
867cc1$(exeext): $(P) $(C_OBJS) $(OBJS) $(LIBDEPS)
868 $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ $(C_OBJS) $(OBJS) $(LIBS)
697
869
698cc1obj: $(P) $(OBJC_OBJS) $(OBJS) $(BC_OBJS) $(LIBDEPS)
699 $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ $(OBJC_OBJS) $(OBJS) $(BC_OBJS) $(LIBS)
700
701# Copy float.h from its source.
702gfloat.h: $(FLOAT_H)
703 -rm -f gfloat.h
704 cp $(FLOAT_H) gfloat.h
705
870# Copy float.h from its source.
871gfloat.h: $(FLOAT_H)
872 -rm -f gfloat.h
873 cp $(FLOAT_H) gfloat.h
874
706# Create float.h source for the native machine.
707float.h-nat: enquire
708 -./enquire -f > tmp-float.h
709 mv tmp-float.h float.h-nat
710
711# Create a dummy float.h source for a cross-compiler.
712float.h-cross:
713 echo "#error float.h values not known for cross-compiler" > t-float.h-cross
714 mv t-float.h-cross float.h-cross
715
716# Used to compile enquire with standard cc, but have forgotten why.
717# Let's try with GCC.
718enquire: enquire.o $(GCC_PARTS)
719 $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ENQUIRE_LDFLAGS) enquire.o -o $@
720enquire.o: $(srcdir)/enquire.c $(GCC_PASSES) stmp-int-hdrs
721# Breaking this line caused a problem with one version of GNU make.
722 $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) $(ENQUIRE_CFLAGS) -I. -c $(srcdir)/enquire.c
723
724# Build the version of limits.h that we will install.
725xlimits.h: glimits.h limitx.h limity.h
726 if $(LIMITS_H_TEST) ; then \
727 cat $(srcdir)/limitx.h $(srcdir)/glimits.h $(srcdir)/limity.h > tmp-xlimits.h; \
728 else \
729 cat $(srcdir)/glimits.h > tmp-xlimits.h; \
730 fi
731 mv tmp-xlimits.h xlimits.h
875# Build the version of limits.h that we will install.
876xlimits.h: glimits.h limitx.h limity.h
877 if $(LIMITS_H_TEST) ; then \
878 cat $(srcdir)/limitx.h $(srcdir)/glimits.h $(srcdir)/limity.h > tmp-xlimits.h; \
879 else \
880 cat $(srcdir)/glimits.h > tmp-xlimits.h; \
881 fi
882 mv tmp-xlimits.h xlimits.h
732
883#
733# Build libgcc.a.
734# This is done in two parts because some functions, in libgcc1.c,
735# must be compiled with something other than GCC,
736# while the rest, in libgcc2.c, must be compiled with xgcc.
737# That means we can't do libgcc2.c until after xgcc, cc1, etc.
738
739# Use this as value of LIBGCC1 to cause conversion to GNU library format.
740# LIBCONVERT should put its output in libgcc1.conv.
741libgcc1.conv: libgcc1.a
742 $(LIBCONVERT) libgcc1.a libgcc1.conv
743
744# Use this as value of LIBGCC1 to inhibit use of libgcc1.c entirely.
745# Make an empty file instead.
746libgcc1.null: $(GCC_PASSES)
884# Build libgcc.a.
885# This is done in two parts because some functions, in libgcc1.c,
886# must be compiled with something other than GCC,
887# while the rest, in libgcc2.c, must be compiled with xgcc.
888# That means we can't do libgcc2.c until after xgcc, cc1, etc.
889
890# Use this as value of LIBGCC1 to cause conversion to GNU library format.
891# LIBCONVERT should put its output in libgcc1.conv.
892libgcc1.conv: libgcc1.a
893 $(LIBCONVERT) libgcc1.a libgcc1.conv
894
895# Use this as value of LIBGCC1 to inhibit use of libgcc1.c entirely.
896# Make an empty file instead.
897libgcc1.null: $(GCC_PASSES)
747 echo "__foo () {}" > dummy.c
898 echo "void __foo () {}" > dummy.c
748 $(GCC_FOR_TARGET) $(GCC_CFLAGS) -c dummy.c
899 $(GCC_FOR_TARGET) $(GCC_CFLAGS) -c dummy.c
749 ld -r -x dummy$(objext); mv a.out dummy$(objext)
750 $(OLDAR) $(OLDAR_FLAGS) libgcc1.null dummy$(objext)
751 rm -f dummy$(objext) dummy.c
752
753# This is $(LIBGCC1) for a cross-compiler.
754# We have no automatic way of building libgcc1.a,
755# so it's up to the installer to find a way to do that.
756# This rule deliberately does not depend on libgcc1.a
757# so that it will fail if the installer hasn't provided it.
758libgcc1.cross:
759 mv libgcc1.a libgcc1.cross || (echo You must find a way to make libgcc1.a; false)
760
761# Compile the library of arithmetic subroutines with the native compiler.
762# Don't compile it with GCC!
763# (That would cause most arithmetic functions to call themselves.)
900 $(OLDAR) $(OLDAR_FLAGS) libgcc1.null dummy$(objext)
901 rm -f dummy$(objext) dummy.c
902
903# This is $(LIBGCC1) for a cross-compiler.
904# We have no automatic way of building libgcc1.a,
905# so it's up to the installer to find a way to do that.
906# This rule deliberately does not depend on libgcc1.a
907# so that it will fail if the installer hasn't provided it.
908libgcc1.cross:
909 mv libgcc1.a libgcc1.cross || (echo You must find a way to make libgcc1.a; false)
910
911# Compile the library of arithmetic subroutines with the native compiler.
912# Don't compile it with GCC!
913# (That would cause most arithmetic functions to call themselves.)
914#
915# NOTE: If you modify these rules substantially, please be sure to
916# check at least config/i386/t-sco5 and possibly other makefile
917# fragments.
764libgcc1.a: libgcc1.c $(CONFIG_H) $(LIB1FUNCS_EXTRA) config.status
765 -rm -f tmplibgcc1.a
766# Actually build it in tmplibgcc1.a, then rename at end,
767# so that libgcc1.a itself remains nonexistent if compilation is aborted.
768# -e causes any failing command to make this rule fail.
769# -e doesn't work in certain shells, so we test $$? as well.
770# lynx has a broken ar, it always complains when the initial library is
771# empty, thus this command works only if we don't do -e
772# There is a trailing backslash (\) deleted from the following line.
773# set -e;
774 for name in $(LIB1FUNCS); \
775 do \
776 echo $${name}; \
777 rm -f $${name}$(objext); \
918libgcc1.a: libgcc1.c $(CONFIG_H) $(LIB1FUNCS_EXTRA) config.status
919 -rm -f tmplibgcc1.a
920# Actually build it in tmplibgcc1.a, then rename at end,
921# so that libgcc1.a itself remains nonexistent if compilation is aborted.
922# -e causes any failing command to make this rule fail.
923# -e doesn't work in certain shells, so we test $$? as well.
924# lynx has a broken ar, it always complains when the initial library is
925# empty, thus this command works only if we don't do -e
926# There is a trailing backslash (\) deleted from the following line.
927# set -e;
928 for name in $(LIB1FUNCS); \
929 do \
930 echo $${name}; \
931 rm -f $${name}$(objext); \
778 $(OLDCC) $(CCLIBFLAGS) $(INCLUDES) -c -DL$${name} $(srcdir)/libgcc1.c; \
932 $(OLDCC) -DIN_LIBGCC1 $(CCLIBFLAGS) $(INCLUDES) -c -DL$${name} $(srcdir)/libgcc1.c; \
779 if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
780 mv libgcc1$(objext) $${name}$(objext); \
933 if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
934 mv libgcc1$(objext) $${name}$(objext); \
781 ld -r -x $${name}$(objext); mv a.out $${name}$(objext); \
782 $(OLDAR) $(OLDAR_FLAGS) tmplibgcc1.a $${name}$(objext); \
783 rm -f $${name}$(objext); \
784 done
785# Some shells crash when a loop has no items.
786# So make sure there is always at least one--`..'.
787# Then ignore it.
788# We don't use -e here because there are if statements
789# that should not make the command give up when the if condition is false.
790# Instead, we test for failure after each command where it matters.
791 for file in .. $(LIB1FUNCS_EXTRA); \
792 do \
793 if [ x$${file} != x.. ]; then \
794 name=`echo $${file} | sed -e 's/[.][cS]$$//' -e 's/[.]asm$$//'`; \
795 echo $${name}; \
796 if [ $${name}.asm = $${file} ]; then \
797 cp $${file} $${name}.s || exit 1; file=$${name}.s; \
798 else true; fi; \
935 $(OLDAR) $(OLDAR_FLAGS) tmplibgcc1.a $${name}$(objext); \
936 rm -f $${name}$(objext); \
937 done
938# Some shells crash when a loop has no items.
939# So make sure there is always at least one--`..'.
940# Then ignore it.
941# We don't use -e here because there are if statements
942# that should not make the command give up when the if condition is false.
943# Instead, we test for failure after each command where it matters.
944 for file in .. $(LIB1FUNCS_EXTRA); \
945 do \
946 if [ x$${file} != x.. ]; then \
947 name=`echo $${file} | sed -e 's/[.][cS]$$//' -e 's/[.]asm$$//'`; \
948 echo $${name}; \
949 if [ $${name}.asm = $${file} ]; then \
950 cp $${file} $${name}.s || exit 1; file=$${name}.s; \
951 else true; fi; \
799 $(OLDCC) $(CCLIBFLAGS) $(INCLUDES) -c $${file}; \
952 $(OLDCC) -DIN_LIBGCC1 $(CCLIBFLAGS) $(INCLUDES) -c $${file}; \
800 if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
953 if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
801 ld -r -x $${name}$(objext); mv a.out $${name}$(objext); \
802 $(OLDAR) $(OLDAR_FLAGS) tmplibgcc1.a $${name}$(objext); \
803 if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
804 rm -f $${name}.s $${name}$(objext); \
805 else true; \
806 fi; \
807 done
808 -if $(RANLIB_TEST) ; then $(RANLIB) tmplibgcc1.a; else true; fi
809 mv tmplibgcc1.a libgcc1.a

--- 13 unchanged lines hidden (view full) ---

823# There is a trailing backslash (\) deleted from the following line.
824# set -e;
825 for name in $(LIB1ASMFUNCS); \
826 do \
827 echo $${name}; \
828 $(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) $(INCLUDES) -c -DL$${name} libgcc1.S; \
829 if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
830 mv libgcc1$(objext) $${name}$(objext); \
954 $(OLDAR) $(OLDAR_FLAGS) tmplibgcc1.a $${name}$(objext); \
955 if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
956 rm -f $${name}.s $${name}$(objext); \
957 else true; \
958 fi; \
959 done
960 -if $(RANLIB_TEST) ; then $(RANLIB) tmplibgcc1.a; else true; fi
961 mv tmplibgcc1.a libgcc1.a

--- 13 unchanged lines hidden (view full) ---

975# There is a trailing backslash (\) deleted from the following line.
976# set -e;
977 for name in $(LIB1ASMFUNCS); \
978 do \
979 echo $${name}; \
980 $(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) $(INCLUDES) -c -DL$${name} libgcc1.S; \
981 if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
982 mv libgcc1$(objext) $${name}$(objext); \
831 ld -r -x $${name}$(objext); mv a.out $${name}$(objext); \
832 $(AR) $(AR_FLAGS) tmplibgcc1.a $${name}$(objext); \
833 rm -f $${name}$(objext); \
834 done
835 -rm -f libgcc1.S
836 mv tmplibgcc1.a libgcc1-asm.a
837
838# Generate assembly versions of the functions required for libgcc1.
839# You'll still need to massage the code by hand (possibly hacking
840# underscores and local labels) but this will get you started.
841libgcc1.S: libgcc1.c $(CONFIG_H) config.status
842 -rm -f libgcc1.S
843 touch libgcc1.S
844 for name in $(LIB1FUNCS); \
845 do \
846 echo $${name}; \
983 $(AR) $(AR_FLAGS) tmplibgcc1.a $${name}$(objext); \
984 rm -f $${name}$(objext); \
985 done
986 -rm -f libgcc1.S
987 mv tmplibgcc1.a libgcc1-asm.a
988
989# Generate assembly versions of the functions required for libgcc1.
990# You'll still need to massage the code by hand (possibly hacking
991# underscores and local labels) but this will get you started.
992libgcc1.S: libgcc1.c $(CONFIG_H) config.status
993 -rm -f libgcc1.S
994 touch libgcc1.S
995 for name in $(LIB1FUNCS); \
996 do \
997 echo $${name}; \
847 $(OLDCC) $(CCLIBFLAGS) $(INCLUDES) -S -DL$${name} $(srcdir)/libgcc1.c; \
998 $(OLDCC) -DIN_LIBGCC1 $(CCLIBFLAGS) $(INCLUDES) -S -DL$${name} $(srcdir)/libgcc1.c; \
848 if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
849 echo '#ifdef ' L$${name} >> libgcc1.S; \
850 cat libgcc1.s >> libgcc1.S; \
851 echo '#endif /*' L$${name} '*/' >> libgcc1.S; \
852 echo "" >> libgcc1.S; \
853 done
854
855# Compiling libgcc2.a requires making sure that cc1, etc. have been compiled.
856# But recompiling cc1 should not force recompilation of libgcc2.a.
857# If you want to force recompilation, delete libgcc2.a.
999 if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
1000 echo '#ifdef ' L$${name} >> libgcc1.S; \
1001 cat libgcc1.s >> libgcc1.S; \
1002 echo '#endif /*' L$${name} '*/' >> libgcc1.S; \
1003 echo "" >> libgcc1.S; \
1004 done
1005
1006# Compiling libgcc2.a requires making sure that cc1, etc. have been compiled.
1007# But recompiling cc1 should not force recompilation of libgcc2.a.
1008# If you want to force recompilation, delete libgcc2.a.
858libgcc2.ready: $(GCC_PASSES) $(LIBGCC2_DEPS) stmp-int-hdrs
1009libgcc2.ready: $(GCC_PASSES) $(LIBGCC2_DEPS) stmp-int-hdrs $(STMP_FIXPROTO)
859 -if [ -f libgcc2.ready ] ; then \
860 true; \
861 else \
862 touch libgcc2.ready; \
863 fi
864
1010 -if [ -f libgcc2.ready ] ; then \
1011 true; \
1012 else \
1013 touch libgcc2.ready; \
1014 fi
1015
865libgcc2.a: libgcc2.c libgcc2.ready $(CONFIG_H) $(LIB2FUNCS_EXTRA) \
866 machmode.h longlong.h gbl-ctors.h config.status
1016LIB2ADD = $(srcdir)/frame.c $(LIB2FUNCS_EXTRA) $(LANG_LIB2FUNCS)
1017libgcc2.a: libgcc2.c libgcc2.ready $(CONFIG_H) $(FPBIT) $(DPBIT) $(LIB2ADD) \
1018 machmode.h longlong.h frame.h gansidecl.h gbl-ctors.h config.status
867# Actually build it in tmplibgcc2.a, then rename at end,
868# so that libgcc2.a itself remains nonexistent if compilation is aborted.
869 -rm -f tmplibgcc2.a
870# -e causes any failing command to make this rule fail.
871# -e doesn't work in certain shells, so we test $$? as well.
872# lynx has a broken ar, it always complains when the initial library is
873# empty, thus this command works only if we don't do -e
874# There is a trailing backslash (\) deleted from the following line.
875# set -e;
876 for name in $(LIB2FUNCS); \
877 do \
878 echo $${name}; \
879 $(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) $(INCLUDES) -c -DL$${name} \
880 $(srcdir)/libgcc2.c -o $${name}$(objext); \
881 if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
1019# Actually build it in tmplibgcc2.a, then rename at end,
1020# so that libgcc2.a itself remains nonexistent if compilation is aborted.
1021 -rm -f tmplibgcc2.a
1022# -e causes any failing command to make this rule fail.
1023# -e doesn't work in certain shells, so we test $$? as well.
1024# lynx has a broken ar, it always complains when the initial library is
1025# empty, thus this command works only if we don't do -e
1026# There is a trailing backslash (\) deleted from the following line.
1027# set -e;
1028 for name in $(LIB2FUNCS); \
1029 do \
1030 echo $${name}; \
1031 $(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) $(INCLUDES) -c -DL$${name} \
1032 $(srcdir)/libgcc2.c -o $${name}$(objext); \
1033 if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
882 ld -r -x $${name}$(objext); mv a.out $${name}$(objext); \
883 $(AR) $(AR_FLAGS) tmplibgcc2.a $${name}$(objext); \
884 rm -f $${name}$(objext); \
885 done
1034 $(AR) $(AR_FLAGS) tmplibgcc2.a $${name}$(objext); \
1035 rm -f $${name}$(objext); \
1036 done
1037 for name in $(LIB2FUNCS_EH); \
1038 do \
1039 echo $${name}; \
1040 $(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) -fexceptions $(INCLUDES) -c \
1041 -DL$${name} $(srcdir)/libgcc2.c -o $${name}$(objext); \
1042 if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
1043 $(AR) $(AR_FLAGS) tmplibgcc2.a $${name}$(objext); \
1044 rm -f $${name}$(objext); \
1045 done
1046 if [ x$(FPBIT) != x ]; then \
1047 for name in $(FPBIT_FUNCS); \
1048 do \
1049 echo $${name}; \
1050 $(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) $(INCLUDES) -c -DL$${name} \
1051 -DFINE_GRAINED_LIBRARIES $(FPBIT) -o $${name}$(objext); \
1052 if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
1053 $(AR) $(AR_FLAGS) tmplibgcc2.a $${name}$(objext); \
1054 rm -f $${name}$(objext); \
1055 done; \
1056 else true; fi;
1057 if [ x$(DPBIT) != x ]; then \
1058 for name in $(DPBIT_FUNCS); \
1059 do \
1060 echo $${name}; \
1061 $(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) $(INCLUDES) -c -DL$${name} \
1062 -DFINE_GRAINED_LIBRARIES $(DPBIT) -o $${name}$(objext); \
1063 if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
1064 $(AR) $(AR_FLAGS) tmplibgcc2.a $${name}$(objext); \
1065 rm -f $${name}$(objext); \
1066 done; \
1067 else true; fi;
886# Some shells crash when a loop has no items.
887# So make sure there is always at least one--`..'.
888# Then ignore it.
889# We don't use -e here because there are if statements
890# that should not make the command give up when the if condition is false.
891# Instead, we test for failure after each command where it matters.
1068# Some shells crash when a loop has no items.
1069# So make sure there is always at least one--`..'.
1070# Then ignore it.
1071# We don't use -e here because there are if statements
1072# that should not make the command give up when the if condition is false.
1073# Instead, we test for failure after each command where it matters.
892 for file in .. $(LIB2FUNCS_EXTRA); \
893 do \
894 if [ x$${file} != x.. ]; then \
895 name=`echo $${file} | sed -e 's/[.][cS]$$//' -e 's/[.]asm$$//'`; \
896 oname=` echo $${name} | sed -e 's,.*/,,'`; \
1074 for file in $(LIB2ADD); do \
1075 name=`echo $${file} | sed -e 's/[.][cSo]$$//' -e 's/[.]asm$$//' -e 's/[.]txt$$//'`; \
1076 oname=` echo $${name} | sed -e 's,.*/,,'`; \
1077 if [ $${name}.txt = $${file} ]; then \
1078 for f in .. `cat $${file}`; do if [ x$${f} != x.. ]; then \
1079 $(MAKE) GCC_FOR_TARGET="$(GCC_FOR_TARGET)" \
1080 AR="$(AR)" AR_FLAGS="$(AR_FLAGS)" CC="$(CC)" \
1081 CFLAGS="$(CFLAGS)" HOST_PREFIX="$(HOST_PREFIX)" \
1082 HOST_PREFIX_1="$(HOST_PREFIX_1)" \
1083 LANGUAGES="$(LANGUAGES)" \
1084 LIBGCC2_CFLAGS="$(LIBGCC2_CFLAGS)" $${f}; \
1085 if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
1086 $(AR) $(AR_FLAGS) tmplibgcc2.a $${f}; \
1087 rm -f $${f}; \
1088 else true; \
1089 fi; done; \
1090 else \
897 echo $${name}; \
898 if [ $${name}.asm = $${file} ]; then \
899 cp $${file} $${name}.s || exit 1; file=$${name}.s; \
900 else true; fi; \
901 $(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) $(INCLUDES) -c $${file}; \
902 if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
1091 echo $${name}; \
1092 if [ $${name}.asm = $${file} ]; then \
1093 cp $${file} $${name}.s || exit 1; file=$${name}.s; \
1094 else true; fi; \
1095 $(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) $(INCLUDES) -c $${file}; \
1096 if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
903 ld -r -x $${oname}$(objext); mv a.out $${oname}$(objext); \
904 $(AR) $(AR_FLAGS) tmplibgcc2.a $${oname}$(objext); \
905 rm -f $${name}.s $${oname}$(objext); \
1097 $(AR) $(AR_FLAGS) tmplibgcc2.a $${oname}$(objext); \
1098 rm -f $${name}.s $${oname}$(objext); \
906 else true; \
907 fi; \
908 done
909 mv tmplibgcc2.a libgcc2.a
910# These lines were deleted from above the mv command
911# because ranlibing libgcc.a itself should suffice.
912# -if [ x${HPUX_GAS} = x ] ; then \
913# if $(RANLIB_TEST) ; then $(RANLIB) tmplibgcc2.a; else true; fi; \
914# else true; fi

--- 17 unchanged lines hidden (view full) ---

932 -if $(RANLIB_TEST) ; then $(RANLIB) tmplibgcc.a; else true; fi
933# Actually build it in tmplibgcc.a, then rename at end,
934# so that libgcc.a itself remains nonexistent if compilation is aborted.
935 mv tmplibgcc.a libgcc.a
936
937# Use the genmultilib shell script to generate the information the gcc
938# driver program needs to select the library directory based on the
939# switches.
1099 fi; \
1100 done
1101 mv tmplibgcc2.a libgcc2.a
1102# These lines were deleted from above the mv command
1103# because ranlibing libgcc.a itself should suffice.
1104# -if [ x${HPUX_GAS} = x ] ; then \
1105# if $(RANLIB_TEST) ; then $(RANLIB) tmplibgcc2.a; else true; fi; \
1106# else true; fi

--- 17 unchanged lines hidden (view full) ---

1124 -if $(RANLIB_TEST) ; then $(RANLIB) tmplibgcc.a; else true; fi
1125# Actually build it in tmplibgcc.a, then rename at end,
1126# so that libgcc.a itself remains nonexistent if compilation is aborted.
1127 mv tmplibgcc.a libgcc.a
1128
1129# Use the genmultilib shell script to generate the information the gcc
1130# driver program needs to select the library directory based on the
1131# switches.
940multilib.h: $(srcdir)/genmultilib Makefile
941 $(SHELL) $(srcdir)/genmultilib "$(MULTILIB_OPTIONS)" \
942 "$(MULTILIB_DIRNAMES)" "$(MULTILIB_MATCHES)" > multilib.h
1132multilib.h: s-mlib; @true
1133s-mlib: $(srcdir)/genmultilib Makefile
1134 $(SHELL) $(srcdir)/genmultilib \
1135 "$(MULTILIB_OPTIONS)" \
1136 "$(MULTILIB_DIRNAMES)" \
1137 "$(MULTILIB_MATCHES)" \
1138 "$(MULTILIB_EXCEPTIONS)" \
1139 "$(MULTILIB_EXTRA_OPTS)" > tmp-mlib.h
1140 $(srcdir)/move-if-change tmp-mlib.h multilib.h
1141 touch s-mlib
943
944# Build multiple copies of libgcc.a, one for each target switch.
945stmp-multilib: $(LIBGCC1) libgcc2.c libgcc2.ready $(CONFIG_H) \
1142
1143# Build multiple copies of libgcc.a, one for each target switch.
1144stmp-multilib: $(LIBGCC1) libgcc2.c libgcc2.ready $(CONFIG_H) \
946 $(LIB2FUNCS_EXTRA) machmode.h longlong.h gbl-ctors.h config.status
1145 frame.h gansidecl.h \
1146 $(LIB2ADD) machmode.h longlong.h gbl-ctors.h config.status
947 for i in `$(GCC_FOR_TARGET) --print-multi-lib`; do \
948 dir=`echo $$i | sed -e 's/;.*$$//'`; \
949 flags=`echo $$i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \
950 $(MAKE) GCC_FOR_TARGET="$(GCC_FOR_TARGET)" \
951 AR="$(AR)" AR_FLAGS="$(AR_FLAGS)" CC="$(CC)" CFLAGS="$(CFLAGS)" \
952 RANLIB="$(RANLIB)" RANLIB_TEST="$(RANLIB_TEST)" \
1147 for i in `$(GCC_FOR_TARGET) --print-multi-lib`; do \
1148 dir=`echo $$i | sed -e 's/;.*$$//'`; \
1149 flags=`echo $$i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \
1150 $(MAKE) GCC_FOR_TARGET="$(GCC_FOR_TARGET)" \
1151 AR="$(AR)" AR_FLAGS="$(AR_FLAGS)" CC="$(CC)" CFLAGS="$(CFLAGS)" \
1152 RANLIB="$(RANLIB)" RANLIB_TEST="$(RANLIB_TEST)" \
1153 LANGUAGES="$(LANGUAGES)" \
953 HOST_PREFIX="$(HOST_PREFIX)" HOST_PREFIX_1="$(HOST_PREFIX_1)" \
954 LIBGCC2_CFLAGS="$(LIBGCC2_CFLAGS) $${flags}" \
1154 HOST_PREFIX="$(HOST_PREFIX)" HOST_PREFIX_1="$(HOST_PREFIX_1)" \
1155 LIBGCC2_CFLAGS="$(LIBGCC2_CFLAGS) $${flags}" \
1156 MULTILIB_CFLAGS="$${flags}" \
955 LIBGCC1="$(LIBGCC1)" LIBGCC2="$(LIBGCC2)" \
956 dir="$${dir}" stmp-multilib-sub; \
957 if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
958 done
959 touch stmp-multilib
960
961# Subroutine of stmp-multilib so make -n works.
962stmp-multilib-sub:
1157 LIBGCC1="$(LIBGCC1)" LIBGCC2="$(LIBGCC2)" \
1158 dir="$${dir}" stmp-multilib-sub; \
1159 if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
1160 done
1161 touch stmp-multilib
1162
1163# Subroutine of stmp-multilib so make -n works.
1164stmp-multilib-sub:
963 rm -f $(dir)/libgcc.a $(LIBGCC2)
1165 rm -f $(LIBGCC2)
1166 if [ -d $(dir) ]; then \
1167 cd $(dir); \
1168 rm -f libgcc.a $(EXTRA_MULTILIB_PARTS); \
1169 else true; \
1170 fi
964 $(MAKE) GCC_FOR_TARGET="$(GCC_FOR_TARGET)" \
965 AR="$(AR)" AR_FLAGS="$(AR_FLAGS)" CC="$(CC)" CFLAGS="$(CFLAGS)" \
966 HOST_PREFIX="$(HOST_PREFIX)" HOST_PREFIX_1="$(HOST_PREFIX_1)" \
1171 $(MAKE) GCC_FOR_TARGET="$(GCC_FOR_TARGET)" \
1172 AR="$(AR)" AR_FLAGS="$(AR_FLAGS)" CC="$(CC)" CFLAGS="$(CFLAGS)" \
1173 HOST_PREFIX="$(HOST_PREFIX)" HOST_PREFIX_1="$(HOST_PREFIX_1)" \
1174 LANGUAGES="$(LANGUAGES)" \
967 LIBGCC2_CFLAGS="$(LIBGCC2_CFLAGS)" $(LIBGCC2)
968 if [ x$(LIBGCC1) != xlibgcc1-asm.a ]; \
969 then true; \
970 else rm -f $(LIBGCC1); \
971 fi
972 if [ x$(LIBGCC1) != xlibgcc1-asm.a ]; \
973 then true; \
974 else \
975 $(MAKE) GCC_FOR_TARGET="$(GCC_FOR_TARGET)" \
976 AR="$(AR)" AR_FLAGS="$(AR_FLAGS)" CC="$(CC)" CFLAGS="$(CFLAGS)" \
977 HOST_PREFIX="$(HOST_PREFIX)" HOST_PREFIX_1="$(HOST_PREFIX_1)" \
1175 LIBGCC2_CFLAGS="$(LIBGCC2_CFLAGS)" $(LIBGCC2)
1176 if [ x$(LIBGCC1) != xlibgcc1-asm.a ]; \
1177 then true; \
1178 else rm -f $(LIBGCC1); \
1179 fi
1180 if [ x$(LIBGCC1) != xlibgcc1-asm.a ]; \
1181 then true; \
1182 else \
1183 $(MAKE) GCC_FOR_TARGET="$(GCC_FOR_TARGET)" \
1184 AR="$(AR)" AR_FLAGS="$(AR_FLAGS)" CC="$(CC)" CFLAGS="$(CFLAGS)" \
1185 HOST_PREFIX="$(HOST_PREFIX)" HOST_PREFIX_1="$(HOST_PREFIX_1)" \
1186 LANGUAGES="$(LANGUAGES)" \
978 LIBGCC2_CFLAGS="$(LIBGCC2_CFLAGS)" $(LIBGCC1); \
979 fi
980 rm -rf tmplibgcc.a tmpcopy
981 mkdir tmpcopy
982 if [ x$(LIBGCC1) != x ]; \
983 then (cd tmpcopy; $(AR) x ../$(LIBGCC1)); \
984 else true; \
985 fi
986 (cd tmpcopy; $(AR) x ../$(LIBGCC2))
987 (cd tmpcopy; $(AR) $(AR_FLAGS) ../tmplibgcc.a *$(objext))
988 rm -rf libgcc2.a tmpcopy
989 if $(RANLIB_TEST) ; then $(RANLIB) tmplibgcc.a; else true; fi
990 if [ -d $(dir) ]; then true; else mkdir $(dir); fi
991 mv tmplibgcc.a $(dir)/libgcc.a
1187 LIBGCC2_CFLAGS="$(LIBGCC2_CFLAGS)" $(LIBGCC1); \
1188 fi
1189 rm -rf tmplibgcc.a tmpcopy
1190 mkdir tmpcopy
1191 if [ x$(LIBGCC1) != x ]; \
1192 then (cd tmpcopy; $(AR) x ../$(LIBGCC1)); \
1193 else true; \
1194 fi
1195 (cd tmpcopy; $(AR) x ../$(LIBGCC2))
1196 (cd tmpcopy; $(AR) $(AR_FLAGS) ../tmplibgcc.a *$(objext))
1197 rm -rf libgcc2.a tmpcopy
1198 if $(RANLIB_TEST) ; then $(RANLIB) tmplibgcc.a; else true; fi
1199 if [ -d $(dir) ]; then true; else mkdir $(dir); fi
1200 mv tmplibgcc.a $(dir)/libgcc.a
1201 for f in .. $(EXTRA_MULTILIB_PARTS); do if [ x$${f} != x.. ]; then \
1202 $(MAKE) GCC_FOR_TARGET="$(GCC_FOR_TARGET)" \
1203 AR="$(AR)" AR_FLAGS="$(AR_FLAGS)" CC="$(CC)" CFLAGS="$(CFLAGS)" \
1204 HOST_PREFIX="$(HOST_PREFIX)" HOST_PREFIX_1="$(HOST_PREFIX_1)" \
1205 LANGUAGES="$(LANGUAGES)" \
1206 MULTILIB_CFLAGS="$(MULTILIB_CFLAGS)" T="t" t$${f}; \
1207 mv t$${f} $(dir)/$${f}; \
1208 else true; \
1209 fi; done
992
1210
993objc-runtime: libobjc.a
994
995# Build the Objective C runtime library.
996libobjc.a: cc1obj stmp-int-hdrs libgcc2.ready $(USE_COLLECT2) $(EXTRA_PARTS)
997 if [ -d objc ]; then true; else mkdir objc; fi
998 thisdir1=`pwd`; \
999 srcdir1=`cd $(srcdir); pwd`; \
1000 cd objc; \
1001 $(MAKE) -f $${srcdir1}/objc/Makefile libobjc.a \
1002 srcdir=$${srcdir1} tooldir=$(tooldir) AR="$(AR)" AR_FLAGS="$(AR_FLAGS)" \
1003 GCC_FOR_TARGET="$${thisdir1}/xgcc -B$${thisdir1}/" \
1004 GCC_CFLAGS="$(GCC_CFLAGS)"
1005 -rm -f libobjc.a
1006 ln objc/libobjc.a . >/dev/null 2>&1 || cp objc/libobjc.a .
1007 -if $(RANLIB_TEST) ; then $(RANLIB) libobjc.a; else true; fi
1008
1009# This is used by objc/Makefile if the user runs that directly.
1010sublibobjc.a: cc1obj stmp-int-hdrs libgcc2.ready
1011 thisdir1=`pwd`; \
1012 srcdir1=`cd $(srcdir); pwd`; \
1013 cd objc; \
1014 $(MAKE) -f $$srcdir1/objc/Makefile libobjc.a \
1015 srcdir=$$srcdir1 tooldir=$(tooldir) AR="$(AR)" AR_FLAGS="$(AR_FLAGS)" \
1016 GCC_FOR_TARGET="$$thisdir1/xgcc -B$$thisdir1/" \
1017 GCC_CFLAGS="$(GCC_CFLAGS)"
1018
1019# Compile two additional files that are linked with every program
1020# linked using GCC on systems using COFF or ELF, for the sake of C++
1021# constructors.
1211# Compile two additional files that are linked with every program
1212# linked using GCC on systems using COFF or ELF, for the sake of C++
1213# constructors.
1022crtbegin.o: stamp-crt ; @true
1023crtend.o: stamp-crt; @true
1214$(T)crtbegin.o: crtstuff.c $(GCC_PASSES) $(CONFIG_H) \
1215 defaults.h frame.h gbl-ctors.h
1216 $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(MULTILIB_CFLAGS) -g0 \
1217 -finhibit-size-directive -fno-inline-functions -fno-exceptions $(CRTSTUFF_T_CFLAGS) \
1218 -c $(srcdir)/crtstuff.c -DCRT_BEGIN -o $(T)crtbegin$(objext)
1024
1219
1025stamp-crt: crtstuff.c $(GCC_PASSES) $(CONFIG_H) gbl-ctors.h
1026 $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(CRTSTUFF_T_CFLAGS) \
1027 -DCRT_BEGIN -finhibit-size-directive -fno-inline-functions \
1028 -g0 -c $(srcdir)/crtstuff.c
1029 mv crtstuff$(objext) crtbegin$(objext)
1030 $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(CRTSTUFF_T_CFLAGS) \
1031 -DCRT_END -finhibit-size-directive -fno-inline-functions \
1032 -g0 -c $(srcdir)/crtstuff.c
1033 mv crtstuff$(objext) crtend$(objext)
1034 touch stamp-crt
1220$(T)crtend.o: crtstuff.c $(GCC_PASSES) $(CONFIG_H) \
1221 defaults.h frame.h gbl-ctors.h
1222 $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(MULTILIB_CFLAGS) -g0 \
1223 -finhibit-size-directive -fno-inline-functions -fno-exceptions $(CRTSTUFF_T_CFLAGS) \
1224 -c $(srcdir)/crtstuff.c -DCRT_END -o $(T)crtend$(objext)
1035
1036# On some systems we also want to install versions of these files
1037# compiled using PIC for use in shared libraries.
1225
1226# On some systems we also want to install versions of these files
1227# compiled using PIC for use in shared libraries.
1038crtbeginS.o crtendS.o: stamp-crtS ; @true
1228crtbeginS.o crtendS.o: s-crtS ; @true
1039
1229
1040stamp-crtS: crtstuff.c $(GCC_PASSES) $(CONFIG_H) gbl-ctors.h
1041 $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(CRTSTUFF_T_CFLAGS) \
1042 -DCRT_BEGIN -finhibit-size-directive -fno-inline-functions \
1043 -g0 -c $(srcdir)/crtstuff.c -fPIC
1230s-crtS: crtstuff.c $(GCC_PASSES) $(CONFIG_H) \
1231 defaults.h frame.h gbl-ctors.h
1232 $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(CRTSTUFF_T_CFLAGS_S) \
1233 -DCRT_BEGIN -DCRTSTUFFS_O -finhibit-size-directive -fno-inline-functions \
1234 -fno-exceptions -g0 -c $(srcdir)/crtstuff.c
1044 mv crtstuff$(objext) crtbeginS$(objext)
1235 mv crtstuff$(objext) crtbeginS$(objext)
1045 $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(CRTSTUFF_T_CFLAGS) \
1046 -DCRT_END -finhibit-size-directive -fno-inline-functions \
1047 -g0 -c $(srcdir)/crtstuff.c -fPIC
1048 mv crtstuff$(objext) crtendS$(objext)
1049 touch stamp-crtS
1050
1236 $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(CRTSTUFF_T_CFLAGS_S) \
1237 -DCRT_END -DCRTSTUFFS_O -finhibit-size-directive -fno-inline-functions \
1238 -fno-exceptions -g0 -c $(srcdir)/crtstuff.c -o crtendS$(objext)
1239 touch s-crtS
1240
1241# Compile the start modules crt0.o and mcrt0.o that are linked with every program
1242crt0.o: s-crt0 ; @true
1243mcrt0.o: s-crt0; @true
1244
1245s-crt0: $(CRT0_S) $(MCRT0_S) $(GCC_PASSES) $(CONFIG_H)
1246 $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(CRT0STUFF_T_CFLAGS) \
1247 -o crt0.o -c $(CRT0_S)
1248 $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(CRT0STUFF_T_CFLAGS) \
1249 -o mcrt0.o -c $(MCRT0_S)
1250 touch s-crt0
1251#
1051# Compiling object files from source files.
1052
1053# Note that dependencies on obstack.h are not written
1054# because that file is not part of GCC.
1055
1056# C language specific files.
1057
1058c-parse.o : $(srcdir)/c-parse.c $(CONFIG_H) $(TREE_H) c-lex.h \
1252# Compiling object files from source files.
1253
1254# Note that dependencies on obstack.h are not written
1255# because that file is not part of GCC.
1256
1257# C language specific files.
1258
1259c-parse.o : $(srcdir)/c-parse.c $(CONFIG_H) $(TREE_H) c-lex.h \
1059 $(srcdir)/c-parse.h c-tree.h input.h flags.h
1260 $(srcdir)/c-parse.h c-tree.h input.h flags.h system.h toplev.h
1060 $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c $(srcdir)/c-parse.c
1061$(srcdir)/c-parse.h: $(srcdir)/c-parse.c
1062$(srcdir)/c-parse.c: $(srcdir)/c-parse.y
1063 cd $(srcdir); $(BISON) $(BISONFLAGS) -d c-parse.y -o c-parse.c
1064$(srcdir)/c-parse.y: c-parse.in
1261 $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c $(srcdir)/c-parse.c
1262$(srcdir)/c-parse.h: $(srcdir)/c-parse.c
1263$(srcdir)/c-parse.c: $(srcdir)/c-parse.y
1264 cd $(srcdir); $(BISON) $(BISONFLAGS) -d c-parse.y -o c-parse.c
1265$(srcdir)/c-parse.y: c-parse.in
1266 echo '/*WARNING: This file is automatically generated!*/' >tmp-c-parse.y
1065 sed -e "/^ifobjc$$/,/^end ifobjc$$/d" \
1066 -e "/^ifc$$/d" -e "/^end ifc$$/d" \
1267 sed -e "/^ifobjc$$/,/^end ifobjc$$/d" \
1268 -e "/^ifc$$/d" -e "/^end ifc$$/d" \
1067 $(srcdir)/c-parse.in >tmp-c-parse.y
1269 $(srcdir)/c-parse.in >>tmp-c-parse.y
1068 $(srcdir)/move-if-change tmp-c-parse.y $(srcdir)/c-parse.y
1069
1070$(srcdir)/c-gperf.h: c-parse.gperf
1071 gperf -p -j1 -i 1 -g -o -t -G -N is_reserved_word -k1,3,$$ \
1072 $(srcdir)/c-parse.gperf >tmp-gperf.h
1073 $(srcdir)/move-if-change tmp-gperf.h $(srcdir)/c-gperf.h
1074
1270 $(srcdir)/move-if-change tmp-c-parse.y $(srcdir)/c-parse.y
1271
1272$(srcdir)/c-gperf.h: c-parse.gperf
1273 gperf -p -j1 -i 1 -g -o -t -G -N is_reserved_word -k1,3,$$ \
1274 $(srcdir)/c-parse.gperf >tmp-gperf.h
1275 $(srcdir)/move-if-change tmp-gperf.h $(srcdir)/c-gperf.h
1276
1075c-decl.o : c-decl.c $(CONFIG_H) $(TREE_H) c-tree.h c-lex.h flags.h output.h
1076c-typeck.o : c-typeck.c $(CONFIG_H) $(TREE_H) c-tree.h flags.h output.h
1077c-lang.o : c-lang.c $(CONFIG_H) $(TREE_H)
1078c-lex.o : c-lex.c $(CONFIG_H) $(TREE_H) c-lex.h c-tree.h $(srcdir)/c-parse.h \
1079 input.h flags.h $(srcdir)/c-gperf.h c-pragma.h
1080c-aux-info.o : c-aux-info.c $(CONFIG_H) $(TREE_H) c-tree.h flags.h
1081c-convert.o : c-convert.c $(CONFIG_H) $(TREE_H) flags.h
1082c-pragma.o: c-pragma.c $(CONFIG_H) $(TREE_H) c-pragma.h
1083c-iterate.o: c-iterate.c $(CONFIG_H) $(TREE_H) $(RTL_H) c-tree.h flags.h
1277c-decl.o : c-decl.c $(CONFIG_H) system.h $(TREE_H) c-tree.h c-lex.h flags.h \
1278 output.h toplev.h
1279c-typeck.o : c-typeck.c $(CONFIG_H) system.h $(TREE_H) c-tree.h flags.h \
1280 output.h $(EXPR_H) $(RTL_H) toplev.h
1281c-lang.o : c-lang.c $(CONFIG_H) system.h $(TREE_H) c-tree.h c-lex.h toplev.h \
1282 output.h
1283c-lex.o : c-lex.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) c-lex.h c-tree.h \
1284 $(srcdir)/c-parse.h input.h flags.h $(srcdir)/c-gperf.h c-pragma.h \
1285 toplev.h output.h
1286c-aux-info.o : c-aux-info.c $(CONFIG_H) system.h $(TREE_H) c-tree.h flags.h
1287c-convert.o : c-convert.c $(CONFIG_H) system.h $(TREE_H) flags.h toplev.h
1288c-pragma.o: c-pragma.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) except.h \
1289 function.h defaults.h c-pragma.h toplev.h
1290c-iterate.o: c-iterate.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) c-tree.h \
1291 flags.h toplev.h $(EXPR_H)
1084
1292
1085# To make a configuration always use collect2, set USE_COLLECT2 to ld.
1086ld: collect2
1087 rm -f ld$(exeext)
1088 ln collect2$(exeext) ld$(exeext) > /dev/null 2>&1 \
1089 || cp collect2$(exeext) ld$(exeext)
1090
1091collect2 : collect2.o cplus-dem.o underscore.o version.o $(LIBDEPS)
1293collect2$(exeext): collect2.o tlink.o hash.o cplus-dem.o underscore.o \
1294 version.o choose-temp.o mkstemp.o $(LIBDEPS)
1092# Don't try modifying collect2 (aka ld) in place--it might be linking this.
1093 -rm -f collect2$(exeext)
1295# Don't try modifying collect2 (aka ld) in place--it might be linking this.
1296 -rm -f collect2$(exeext)
1094 $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ collect2.o \
1095 cplus-dem.o underscore.o version.o $(LIBS)
1297 $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ collect2.o tlink.o hash.o \
1298 cplus-dem.o underscore.o version.o choose-temp.o mkstemp.o $(LIBS)
1096
1299
1097collect2.o : collect2.c $(CONFIG_H) gstab.h obstack.h demangle.h
1300collect2.o : collect2.c $(CONFIG_H) system.h gansidecl.h gstab.h obstack.h \
1301 $(DEMANGLE_H)
1098 $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
1302 $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
1099 -DTARGET_MACHINE=\"$(target)\" $(MAYBE_USE_COLLECT2) \
1303 -DTARGET_MACHINE=\"$(target_alias)\" $(MAYBE_USE_COLLECT2) \
1100 -c `echo $(srcdir)/collect2.c | sed 's,^\./,,'`
1101
1304 -c `echo $(srcdir)/collect2.c | sed 's,^\./,,'`
1305
1102cplus-dem.o: cplus-dem.c demangle.h
1306tlink.o: tlink.c $(DEMANGLE_H) hash.h $(CONFIG_H) system.h toplev.h
1307hash.o: hash.c hash.h system.h toplev.h
1308cplus-dem.o: cplus-dem.c $(DEMANGLE_H)
1103
1309
1104underscore.c: stamp-under ; @true
1310underscore.c: s-under ; @true
1105
1311
1106stamp-under: $(GCC_PASSES)
1312s-under: $(GCC_PASSES)
1107 echo "int xxy_us_dummy;" >tmp-dum.c
1108 $(GCC_FOR_TARGET) -S tmp-dum.c
1109 echo '/*WARNING: This file is automatically generated!*/' >tmp-under.c
1110 if grep _xxy_us_dummy tmp-dum.s > /dev/null ; then \
1111 echo "int prepends_underscore = 1;" >>tmp-under.c; \
1112 else \
1113 echo "int prepends_underscore = 0;" >>tmp-under.c; \
1114 fi
1115 $(srcdir)/move-if-change tmp-under.c underscore.c
1116 -rm -f tmp-dum.c tmp-dum.s
1313 echo "int xxy_us_dummy;" >tmp-dum.c
1314 $(GCC_FOR_TARGET) -S tmp-dum.c
1315 echo '/*WARNING: This file is automatically generated!*/' >tmp-under.c
1316 if grep _xxy_us_dummy tmp-dum.s > /dev/null ; then \
1317 echo "int prepends_underscore = 1;" >>tmp-under.c; \
1318 else \
1319 echo "int prepends_underscore = 0;" >>tmp-under.c; \
1320 fi
1321 $(srcdir)/move-if-change tmp-under.c underscore.c
1322 -rm -f tmp-dum.c tmp-dum.s
1117 touch stamp-under
1323 touch s-under
1118
1324
1119# Objective C language specific files.
1120
1121objc-parse.o : $(srcdir)/objc-parse.c $(CONFIG_H) $(TREE_H) c-lex.h \
1122 c-tree.h input.h flags.h objc-act.h
1123 $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c $(srcdir)/objc-parse.c
1124$(srcdir)/objc-parse.c : $(srcdir)/objc-parse.y
1125 cd $(srcdir); $(BISON) $(BISONFLAGS) objc-parse.y -o objc-parse.c
1126$(srcdir)/objc-parse.y: $(srcdir)/c-parse.in
1127 sed -e "/^ifc$$/,/^end ifc$$/d" \
1128 -e "/^ifobjc$$/d" -e "/^end ifobjc$$/d" \
1129 $(srcdir)/c-parse.in >tmp-objc-prs.y
1130 $(srcdir)/move-if-change tmp-objc-prs.y $(srcdir)/objc-parse.y
1131
1132objc-act.o : objc-act.c $(CONFIG_H) $(TREE_H) $(RTL_H) c-tree.h c-lex.h \
1133 flags.h objc-act.h input.h function.h $(srcdir)/c-parse.h
1134
1135# A file used by all variants of C.
1136
1325# A file used by all variants of C.
1326
1137c-common.o : c-common.c $(CONFIG_H) $(TREE_H) c-tree.h c-lex.h flags.h
1327c-common.o : c-common.c $(CONFIG_H) system.h $(TREE_H) c-tree.h c-lex.h \
1328 flags.h toplev.h output.h
1138
1139# Language-independent files.
1140
1329
1330# Language-independent files.
1331
1141gcc.o: gcc.c $(CONFIG_H) multilib.h config.status $(lang_specs_files)
1142 $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
1332DRIVER_DEFINES = \
1143 -DSTANDARD_STARTFILE_PREFIX=\"$(libdir)/\" \
1144 -DSTANDARD_EXEC_PREFIX=\"$(libdir)/gcc-lib/\" \
1145 -DDEFAULT_TARGET_VERSION=\"$(version)\" \
1333 -DSTANDARD_STARTFILE_PREFIX=\"$(libdir)/\" \
1334 -DSTANDARD_EXEC_PREFIX=\"$(libdir)/gcc-lib/\" \
1335 -DDEFAULT_TARGET_VERSION=\"$(version)\" \
1146 -DDEFAULT_TARGET_MACHINE=\"$(target)\" \
1147 -DTOOLDIR_BASE_PREFIX=\"$(exec_prefix)/\" \
1148 $(MAYBE_TARGET_DEFAULT) \
1336 -DDEFAULT_TARGET_MACHINE=\"$(target_alias)\" \
1337 -DTOOLDIR_BASE_PREFIX=\"$(exec_prefix)/\"
1338gcc.o: gcc.c $(CONFIG_H) system.h gansidecl.h multilib.h Makefile \
1339 $(lang_specs_files)
1340 $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
1341 $(DRIVER_DEFINES) \
1149 -c `echo $(srcdir)/gcc.c | sed 's,^\./,,'`
1150
1342 -c `echo $(srcdir)/gcc.c | sed 's,^\./,,'`
1343
1344tree-check.h: s-check ; @true
1345s-check : gencheck $(srcdir)/move-if-change
1346 ./gencheck > tmp-check.h
1347 $(srcdir)/move-if-change tmp-check.h tree-check.h
1348 touch s-check
1349
1350gencheck : gencheck.o tree.def $(HOST_LIBDEPS)
1351 $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
1352 gencheck.o $(HOST_LIBS)
1353
1354gencheck.o : gencheck.c hconfig.h system.h
1355 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/gencheck.c
1356
1151dumpvers: dumpvers.c
1152
1153version.o: version.c
1357dumpvers: dumpvers.c
1358
1359version.o: version.c
1154obstack.o: obstack.c
1360obstack.o: obstack.c $(CONFIG_H)
1361choose-temp.o: choose-temp.c $(CONFIG_H) gansidecl.h system.h
1362mkstemp.o: mkstemp.c $(CONFIG_H) gansidecl.h system.h
1363pexecute.o: pexecute.c $(CONFIG_H) system.h gansidecl.h
1364prefix.o: prefix.c $(CONFIG_H) system.h gansidecl.h Makefile
1365 $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
1366 -DPREFIX=\"$(prefix)\" \
1367 -c `echo $(srcdir)/prefix.c | sed 's,^\./,,'`
1155
1368
1156convert.o: convert.c $(CONFIG_H) $(TREE_H) flags.h convert.h
1369convert.o: convert.c $(CONFIG_H) $(TREE_H) flags.h convert.h toplev.h
1157
1370
1158tree.o : tree.c $(CONFIG_H) $(TREE_H) flags.h function.h
1159print-tree.o : print-tree.c $(CONFIG_H) $(TREE_H)
1160stor-layout.o : stor-layout.c $(CONFIG_H) $(TREE_H) flags.h function.h
1161fold-const.o : fold-const.c $(CONFIG_H) $(TREE_H) flags.h
1162toplev.o : toplev.c $(CONFIG_H) $(TREE_H) $(RTL_H) bytecode.h bc-emit.h \
1371tree.o : tree.c $(CONFIG_H) system.h $(TREE_H) flags.h function.h toplev.h except.h
1372print-tree.o : print-tree.c $(CONFIG_H) system.h $(TREE_H)
1373stor-layout.o : stor-layout.c $(CONFIG_H) system.h $(TREE_H) flags.h \
1374 function.h $(EXPR_H) $(RTL_H) toplev.h except.h
1375fold-const.o : fold-const.c $(CONFIG_H) system.h $(TREE_H) flags.h toplev.h
1376toplev.o : toplev.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) \
1163 flags.h input.h insn-attr.h xcoffout.h defaults.h output.h \
1377 flags.h input.h insn-attr.h xcoffout.h defaults.h output.h \
1378 insn-codes.h insn-config.h $(RECOG_H) Makefile toplev.h dwarfout.h \
1379 dwarf2out.h sdbout.h dbxout.h \
1164 $(lang_options_files)
1380 $(lang_options_files)
1165 $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
1166 $(MAYBE_TARGET_DEFAULT) $(MAYBE_USE_COLLECT2) \
1381 $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(MAYBE_USE_COLLECT2) \
1382 -DTARGET_NAME=\"$(target_alias)\" \
1167 -c `echo $(srcdir)/toplev.c | sed 's,^\./,,'`
1168
1383 -c `echo $(srcdir)/toplev.c | sed 's,^\./,,'`
1384
1169rtl.o : rtl.c $(CONFIG_H) $(RTL_H)
1385rtl.o : rtl.c $(CONFIG_H) system.h $(RTL_H) bitmap.h
1170
1386
1171print-rtl.o : print-rtl.c $(CONFIG_H) $(RTL_H)
1172rtlanal.o : rtlanal.c $(CONFIG_H) $(RTL_H)
1387print-rtl.o : print-rtl.c $(CONFIG_H) system.h $(RTL_H) bitmap.h
1388rtlanal.o : rtlanal.c $(CONFIG_H) system.h $(RTL_H)
1173
1389
1174varasm.o : varasm.c $(CONFIG_H) $(TREE_H) $(RTL_H) flags.h function.h \
1175 defaults.h insn-codes.h expr.h hard-reg-set.h regs.h xcoffout.h \
1176 output.h bytecode.h c-pragma.h
1177function.o : function.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h function.h \
1178 insn-flags.h insn-codes.h expr.h regs.h hard-reg-set.h insn-config.h \
1179 recog.h output.h bytecode.h
1180stmt.o : stmt.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h function.h \
1181 insn-flags.h insn-config.h insn-codes.h hard-reg-set.h expr.h loop.h \
1182 recog.h bytecode.h bc-typecd.h bc-typecd.def bc-opcode.h bc-optab.h \
1183 bc-emit.h
1184expr.o : expr.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h function.h regs.h \
1185 insn-flags.h insn-codes.h expr.h insn-config.h recog.h output.h \
1186 typeclass.h bytecode.h bc-opcode.h bc-typecd.h bc-typecd.def bc-optab.h \
1187 bc-emit.h modemap.def
1188calls.o : calls.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h expr.h insn-codes.h \
1189 insn-flags.h
1190expmed.o : expmed.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h \
1191 insn-flags.h insn-config.h insn-codes.h expr.h recog.h real.h
1192explow.o : explow.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h hard-reg-set.h \
1193 insn-config.h expr.h recog.h insn-flags.h insn-codes.h
1194optabs.o : optabs.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h \
1195 insn-flags.h insn-config.h insn-codes.h expr.h recog.h reload.h
1196dbxout.o : dbxout.c $(CONFIG_H) $(TREE_H) $(RTL_H) flags.h regs.h \
1197 insn-config.h reload.h gstab.h xcoffout.h defaults.h output.h
1198sdbout.o : sdbout.c $(CONFIG_H) $(TREE_H) $(RTL_H) gsyms.h flags.h \
1199 insn-config.h reload.h
1200dwarfout.o : dwarfout.c $(CONFIG_H) $(TREE_H) $(RTL_H) dwarf.h flags.h \
1201 insn-config.h reload.h output.h defaults.h
1202xcoffout.o : xcoffout.c $(CONFIG_H) $(TREE_H) $(RTL_H) xcoffout.h flags.h
1203emit-rtl.o : emit-rtl.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h \
1204 function.h regs.h insn-config.h insn-codes.h real.h expr.h bytecode.h \
1205 bc-opcode.h bc-typecd.h bc-typecd.def bc-optab.h bc-emit.h bc-opname.h
1206real.o : real.c $(CONFIG_H) $(TREE_H)
1207getpwd.o : getpwd.c $(CONFIG_H)
1390varasm.o : varasm.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) flags.h \
1391 function.h defaults.h $(EXPR_H) hard-reg-set.h $(REGS_H) \
1392 xcoffout.h output.h c-pragma.h toplev.h except.h dbxout.h sdbout.h
1393function.o : function.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
1394 function.h insn-flags.h insn-codes.h $(EXPR_H) $(REGS_H) hard-reg-set.h \
1395 insn-config.h $(RECOG_H) output.h toplev.h except.h
1396stmt.o : stmt.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h function.h \
1397 insn-flags.h insn-config.h insn-codes.h hard-reg-set.h $(EXPR_H) except.h \
1398 loop.h $(RECOG_H) toplev.h output.h
1399except.o : except.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
1400 function.h insn-flags.h $(EXPR_H) $(REGS_H) hard-reg-set.h \
1401 insn-config.h $(RECOG_H) output.h except.h toplev.h
1402expr.o : expr.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h function.h \
1403 $(REGS_H) insn-flags.h insn-codes.h $(EXPR_H) insn-config.h $(RECOG_H) output.h \
1404 typeclass.h hard-reg-set.h toplev.h hard-reg-set.h except.h
1405calls.o : calls.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h $(EXPR_H) \
1406 insn-flags.h $(REGS_H) toplev.h output.h
1407expmed.o : expmed.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
1408 insn-flags.h insn-config.h insn-codes.h $(EXPR_H) $(RECOG_H) real.h
1409explow.o : explow.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
1410 hard-reg-set.h insn-config.h $(EXPR_H) $(RECOG_H) insn-flags.h insn-codes.h
1411optabs.o : optabs.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
1412 insn-flags.h insn-config.h insn-codes.h $(EXPR_H) $(RECOG_H) reload.h
1413dbxout.o : dbxout.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) flags.h $(REGS_H) \
1414 insn-config.h reload.h gstab.h xcoffout.h defaults.h output.h dbxout.h \
1415 toplev.h
1416sdbout.o : sdbout.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) flags.h except.h \
1417 function.h $(EXPR_H) output.h hard-reg-set.h $(REGS_H) defaults.h real.h \
1418 insn-config.h obstack.h xcoffout.h c-pragma.h sdbout.h toplev.h
1419dwarfout.o : dwarfout.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) dwarf.h \
1420 flags.h insn-config.h reload.h output.h defaults.h toplev.h dwarfout.h
1421dwarf2out.o : dwarf2out.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) dwarf2.h \
1422 flags.h insn-config.h reload.h output.h defaults.h \
1423 hard-reg-set.h $(REGS_H) $(EXPR_H) toplev.h dwarf2out.h dyn-string.h
1424xcoffout.o : xcoffout.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) xcoffout.h \
1425 flags.h toplev.h output.h dbxout.h
1426emit-rtl.o : emit-rtl.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
1427 except.h function.h $(REGS_H) insn-config.h $(RECOG_H) real.h \
1428 $(EXPR_H) obstack.h hard-reg-set.h bitmap.h
1429real.o : real.c $(CONFIG_H) system.h $(TREE_H) toplev.h
1430getpwd.o : getpwd.c $(CONFIG_H) system.h
1208
1431
1209integrate.o : integrate.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h integrate.h \
1210 insn-flags.h insn-config.h insn-codes.h expr.h real.h function.h \
1211 bytecode.h
1432integrate.o : integrate.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
1433 integrate.h insn-flags.h insn-config.h $(EXPR_H) real.h $(REGS_H) \
1434 function.h output.h $(RECOG_H) except.h toplev.h
1212
1435
1213jump.o : jump.c $(CONFIG_H) $(RTL_H) flags.h hard-reg-set.h regs.h \
1214 insn-config.h insn-flags.h insn-codes.h expr.h real.h
1215stupid.o : stupid.c $(CONFIG_H) $(RTL_H) regs.h hard-reg-set.h flags.h
1436jump.o : jump.c $(CONFIG_H) system.h $(RTL_H) flags.h hard-reg-set.h $(REGS_H) \
1437 insn-config.h insn-flags.h $(RECOG_H) $(EXPR_H) real.h except.h \
1438 toplev.h insn-attr.h
1439stupid.o : stupid.c $(CONFIG_H) system.h $(RTL_H) $(REGS_H) hard-reg-set.h \
1440 flags.h toplev.h
1216
1441
1217cse.o : cse.c $(CONFIG_H) $(RTL_H) regs.h hard-reg-set.h flags.h real.h \
1218 insn-config.h recog.h
1219loop.o : loop.c $(CONFIG_H) $(RTL_H) flags.h loop.h insn-config.h \
1220 insn-flags.h insn-codes.h regs.h hard-reg-set.h recog.h expr.h real.h
1221unroll.o : unroll.c $(CONFIG_H) $(RTL_H) insn-config.h insn-codes.h \
1222 integrate.h regs.h flags.h expr.h loop.h
1223flow.o : flow.c $(CONFIG_H) $(RTL_H) flags.h insn-config.h \
1224 basic-block.h regs.h hard-reg-set.h output.h
1225combine.o : combine.c $(CONFIG_H) $(RTL_H) flags.h \
1226 insn-config.h insn-flags.h insn-codes.h insn-attr.h regs.h expr.h \
1227 basic-block.h recog.h real.h hard-reg-set.h
1228regclass.o : regclass.c $(CONFIG_H) $(RTL_H) hard-reg-set.h flags.h \
1229 basic-block.h regs.h insn-config.h recog.h reload.h real.h bytecode.h
1230local-alloc.o : local-alloc.c $(CONFIG_H) $(RTL_H) flags.h basic-block.h \
1231 regs.h hard-reg-set.h insn-config.h recog.h output.h
1232global.o : global.c $(CONFIG_H) $(RTL_H) flags.h \
1233 basic-block.h regs.h hard-reg-set.h insn-config.h output.h
1442cse.o : cse.c $(CONFIG_H) system.h $(RTL_H) $(REGS_H) hard-reg-set.h flags.h \
1443 real.h insn-config.h $(RECOG_H) $(EXPR_H) toplev.h output.h
1444gcse.o : gcse.c $(CONFIG_H) system.h $(RTL_H) $(REGS_H) hard-reg-set.h flags.h \
1445 real.h insn-config.h $(RECOG_H) $(EXPR_H) $(BASIC_BLOCK_H) output.h
1446profile.o : profile.c $(CONFIG_H) system.h $(RTL_H) flags.h insn-flags.h \
1447 gcov-io.h $(TREE_H) output.h $(REGS_H) toplev.h
1448loop.o : loop.c $(CONFIG_H) system.h $(RTL_H) flags.h loop.h insn-config.h \
1449 insn-flags.h $(REGS_H) hard-reg-set.h $(RECOG_H) $(EXPR_H) real.h \
1450 toplev.h
1451unroll.o : unroll.c $(CONFIG_H) system.h $(RTL_H) insn-config.h \
1452 integrate.h $(REGS_H) $(RECOG_H) flags.h $(EXPR_H) loop.h toplev.h
1453flow.o : flow.c $(CONFIG_H) system.h $(RTL_H) flags.h insn-config.h \
1454 $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h output.h toplev.h
1455combine.o : combine.c $(CONFIG_H) system.h $(RTL_H) flags.h \
1456 insn-config.h insn-flags.h insn-codes.h insn-attr.h $(REGS_H) $(EXPR_H) \
1457 $(BASIC_BLOCK_H) $(RECOG_H) real.h hard-reg-set.h toplev.h
1458regclass.o : regclass.c $(CONFIG_H) system.h $(RTL_H) hard-reg-set.h flags.h \
1459 $(BASIC_BLOCK_H) $(REGS_H) insn-config.h $(RECOG_H) reload.h real.h toplev.h \
1460 output.h
1461local-alloc.o : local-alloc.c $(CONFIG_H) system.h $(RTL_H) flags.h \
1462 $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h insn-config.h $(RECOG_H) output.h \
1463 insn-attr.h toplev.h
1464bitmap.o : bitmap.c $(CONFIG_H) system.h $(RTL_H) flags.h $(BASIC_BLOCK_H) \
1465 $(REGS_H)
1466global.o : global.c $(CONFIG_H) system.h $(RTL_H) flags.h \
1467 $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h insn-config.h output.h toplev.h
1468varray.o : varray.c $(CONFIG_H) system.h varray.h $(RTL_H) $(TREE_H) bitmap.h
1234
1469
1235reload.o : reload.c $(CONFIG_H) $(RTL_H) flags.h output.h \
1236 reload.h recog.h hard-reg-set.h insn-config.h insn-codes.h regs.h real.h
1237reload1.o : reload1.c $(CONFIG_H) $(RTL_H) real.h flags.h expr.h \
1238 reload.h regs.h hard-reg-set.h insn-config.h insn-flags.h insn-codes.h \
1239 basic-block.h recog.h output.h
1240caller-save.o : caller-save.c $(CONFIG_H) $(RTL_H) flags.h \
1241 regs.h hard-reg-set.h insn-codes.h insn-config.h basic-block.h recog.h \
1242 reload.h expr.h
1243reorg.o : reorg.c $(CONFIG_H) $(RTL_H) conditions.h hard-reg-set.h \
1244 basic-block.h regs.h insn-config.h insn-attr.h insn-flags.h recog.h \
1245 flags.h output.h
1246sched.o : sched.c $(CONFIG_H) $(RTL_H) basic-block.h regs.h hard-reg-set.h \
1247 flags.h insn-config.h insn-attr.h
1248final.o : final.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h regs.h \
1249 recog.h conditions.h insn-config.h insn-attr.h real.h output.h \
1250 hard-reg-set.h insn-flags.h insn-codes.h gstab.h xcoffout.h defaults.h
1251recog.o : recog.c $(CONFIG_H) $(RTL_H) \
1252 regs.h recog.h hard-reg-set.h flags.h insn-config.h insn-attr.h \
1470reload.o : reload.c $(CONFIG_H) system.h $(RTL_H) flags.h output.h $(EXPR_H) \
1471 reload.h $(RECOG_H) hard-reg-set.h insn-config.h insn-codes.h $(REGS_H) \
1472 real.h toplev.h
1473reload1.o : reload1.c $(CONFIG_H) system.h $(RTL_H) real.h flags.h $(EXPR_H) \
1474 reload.h $(REGS_H) hard-reg-set.h insn-config.h insn-flags.h insn-codes.h \
1475 $(BASIC_BLOCK_H) $(RECOG_H) output.h toplev.h
1476caller-save.o : caller-save.c $(CONFIG_H) system.h $(RTL_H) flags.h \
1477 $(REGS_H) hard-reg-set.h insn-config.h $(BASIC_BLOCK_H) \
1478 $(RECOG_H) reload.h $(EXPR_H) toplev.h
1479reorg.o : reorg.c $(CONFIG_H) system.h $(RTL_H) conditions.h hard-reg-set.h \
1480 $(BASIC_BLOCK_H) $(REGS_H) insn-config.h insn-attr.h \
1481 insn-flags.h $(RECOG_H) flags.h output.h $(EXPR_H)
1482alias.o : alias.c $(CONFIG_H) system.h $(RTL_H) flags.h hard-reg-set.h \
1483 $(REGS_H) toplev.h $(EXPR_H)
1484regmove.o : regmove.c $(CONFIG_H) system.h $(RTL_H) insn-config.h \
1485 $(RECOG_H) output.h reload.h $(REGS_H) hard-reg-set.h flags.h \
1486 $(EXPR_H) insn-flags.h $(BASIC_BLOCK_H) toplev.h
1487$(SCHED_PREFIX)sched.o : $(SCHED_PREFIX)sched.c $(CONFIG_H) system.h $(RTL_H) \
1488 $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h flags.h insn-config.h insn-attr.h \
1489 toplev.h
1490final.o : final.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h $(REGS_H) \
1491 $(RECOG_H) conditions.h insn-config.h insn-attr.h except.h real.h output.h \
1492 hard-reg-set.h insn-flags.h insn-codes.h gstab.h xcoffout.h defaults.h \
1493 toplev.h reload.h dwarfout.h dwarf2out.h sdbout.h dbxout.h
1494recog.o : recog.c $(CONFIG_H) system.h $(RTL_H) \
1495 $(REGS_H) $(RECOG_H) hard-reg-set.h flags.h insn-config.h insn-attr.h \
1253 insn-flags.h insn-codes.h real.h
1496 insn-flags.h insn-codes.h real.h
1254reg-stack.o : reg-stack.c $(CONFIG_H) $(RTL_H) $(TREE_H) \
1255 regs.h hard-reg-set.h flags.h insn-config.h
1497reg-stack.o : reg-stack.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) \
1498 $(REGS_H) hard-reg-set.h flags.h insn-config.h insn-flags.h toplev.h
1499dyn-string.o: dyn-string.c dyn-string.h $(CONFIG_H) system.h gansidecl.h
1256
1257$(out_object_file): $(out_file) $(CONFIG_H) $(TREE_H) \
1500
1501$(out_object_file): $(out_file) $(CONFIG_H) $(TREE_H) \
1258 $(RTL_H) regs.h hard-reg-set.h real.h insn-config.h conditions.h \
1259 insn-flags.h output.h insn-attr.h insn-codes.h
1502 $(RTL_H) $(REGS_H) hard-reg-set.h real.h insn-config.h conditions.h \
1503 insn-flags.h output.h insn-attr.h insn-codes.h system.h toplev.h
1260 $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(out_file)
1261
1262# Build auxiliary files that support ecoff format.
1263mips-tfile: mips-tfile.o version.o $(LIBDEPS)
1264 $(CC) $(CFLAGS) $(LDFLAGS) -o $@ mips-tfile.o version.o $(LIBS)
1265
1504 $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(out_file)
1505
1506# Build auxiliary files that support ecoff format.
1507mips-tfile: mips-tfile.o version.o $(LIBDEPS)
1508 $(CC) $(CFLAGS) $(LDFLAGS) -o $@ mips-tfile.o version.o $(LIBS)
1509
1266mips-tfile.o : mips-tfile.c $(CONFIG_H) $(RTL_H)
1510mips-tfile.o : mips-tfile.c $(CONFIG_H) $(RTL_H) system.h machmode.h
1267
1268mips-tdump: mips-tdump.o version.o $(LIBDEPS)
1269 $(CC) $(CFLAGS) $(LDFLAGS) -o $@ mips-tdump.o version.o $(LIBS)
1270
1511
1512mips-tdump: mips-tdump.o version.o $(LIBDEPS)
1513 $(CC) $(CFLAGS) $(LDFLAGS) -o $@ mips-tdump.o version.o $(LIBS)
1514
1271mips-tdump.o : mips-tdump.c $(CONFIG_H) $(RTL_H)
1515mips-tdump.o : mips-tdump.c $(CONFIG_H) $(RTL_H) system.h
1272
1273# Build file to support OSF/rose half-pic format.
1516
1517# Build file to support OSF/rose half-pic format.
1274halfpic.o: halfpic.c $(CONFIG_H) $(RTL_H) $(TREE_H)
1518halfpic.o: halfpic.c $(CONFIG_H) $(RTL_H) $(TREE_H) system.h
1275
1276# Normally this target is not used; but it is used if you
1277# define ALLOCA=alloca.o. In that case, you must get a suitable alloca.c
1278# from the GNU Emacs distribution.
1279alloca.o: alloca.c
1280 $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(ALLOCA_FLAGS) \
1281 -c `echo $(srcdir)/alloca.c | sed 's,^\./,,'`
1282 $(ALLOCA_FINISH)
1519
1520# Normally this target is not used; but it is used if you
1521# define ALLOCA=alloca.o. In that case, you must get a suitable alloca.c
1522# from the GNU Emacs distribution.
1523alloca.o: alloca.c
1524 $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(ALLOCA_FLAGS) \
1525 -c `echo $(srcdir)/alloca.c | sed 's,^\./,,'`
1526 $(ALLOCA_FINISH)
1283
1527#
1284# Generate header and source files from the machine description,
1285# and compile them.
1286
1287.PRECIOUS: insn-config.h insn-flags.h insn-codes.h \
1288 insn-emit.c insn-recog.c insn-extract.c insn-output.c insn-peep.c \
1289 insn-attr.h insn-attrtab.c
1290
1291# The following pair of rules has this effect:
1292# genconfig is run only if the md has changed since genconfig was last run;
1293# but the file insn-config.h is touched only when its contents actually change.
1294
1295# Each of the other insn-* files is handled by a similar pair of rules.
1296
1297# This causes an anomaly in the results of make -n
1528# Generate header and source files from the machine description,
1529# and compile them.
1530
1531.PRECIOUS: insn-config.h insn-flags.h insn-codes.h \
1532 insn-emit.c insn-recog.c insn-extract.c insn-output.c insn-peep.c \
1533 insn-attr.h insn-attrtab.c
1534
1535# The following pair of rules has this effect:
1536# genconfig is run only if the md has changed since genconfig was last run;
1537# but the file insn-config.h is touched only when its contents actually change.
1538
1539# Each of the other insn-* files is handled by a similar pair of rules.
1540
1541# This causes an anomaly in the results of make -n
1298# because insn-* is older than stamp-*
1542# because insn-* is older than s-*
1299# and thus make -n thinks that insn-* will be updated
1300# and force recompilation of things that depend on it.
1301# We use move-if-change precisely to avoid such recompilation.
1302# But there is no way to teach make -n that it will be avoided.
1303
1304# Each of the insn-*.[ch] rules has a semicolon at the end,
1305# for otherwise the system Make on SunOS 4.1 never tries
1306# to recompile insn-*.o. To avoid problems and extra noise from
1307# versions of make which don't like empty commands (nothing after the
1308# trailing `;'), we call true for each.
1309
1543# and thus make -n thinks that insn-* will be updated
1544# and force recompilation of things that depend on it.
1545# We use move-if-change precisely to avoid such recompilation.
1546# But there is no way to teach make -n that it will be avoided.
1547
1548# Each of the insn-*.[ch] rules has a semicolon at the end,
1549# for otherwise the system Make on SunOS 4.1 never tries
1550# to recompile insn-*.o. To avoid problems and extra noise from
1551# versions of make which don't like empty commands (nothing after the
1552# trailing `;'), we call true for each.
1553
1310insn-config.h: stamp-config ; @true
1311stamp-config : $(md_file) genconfig $(srcdir)/move-if-change
1554insn-config.h: s-config ; @true
1555s-config : $(md_file) genconfig $(srcdir)/move-if-change
1312 ./genconfig $(md_file) > tmp-config.h
1313 $(srcdir)/move-if-change tmp-config.h insn-config.h
1556 ./genconfig $(md_file) > tmp-config.h
1557 $(srcdir)/move-if-change tmp-config.h insn-config.h
1314 touch stamp-config
1558 touch s-config
1315
1559
1316insn-flags.h: stamp-flags ; @true
1317stamp-flags : $(md_file) genflags $(srcdir)/move-if-change
1560insn-flags.h: s-flags ; @true
1561s-flags : $(md_file) genflags $(srcdir)/move-if-change
1318 ./genflags $(md_file) > tmp-flags.h
1319 $(srcdir)/move-if-change tmp-flags.h insn-flags.h
1562 ./genflags $(md_file) > tmp-flags.h
1563 $(srcdir)/move-if-change tmp-flags.h insn-flags.h
1320 touch stamp-flags
1564 touch s-flags
1321
1565
1322insn-codes.h: stamp-codes ; @true
1323stamp-codes : $(md_file) gencodes $(srcdir)/move-if-change
1566insn-codes.h: s-codes ; @true
1567s-codes : $(md_file) gencodes $(srcdir)/move-if-change
1324 ./gencodes $(md_file) > tmp-codes.h
1325 $(srcdir)/move-if-change tmp-codes.h insn-codes.h
1568 ./gencodes $(md_file) > tmp-codes.h
1569 $(srcdir)/move-if-change tmp-codes.h insn-codes.h
1326 touch stamp-codes
1570 touch s-codes
1327
1571
1328insn-emit.o : insn-emit.c $(CONFIG_H) $(RTL_H) expr.h real.h output.h \
1329 insn-config.h insn-flags.h insn-codes.h
1572insn-emit.o : insn-emit.c $(CONFIG_H) $(RTL_H) $(EXPR_H) real.h output.h \
1573 insn-config.h insn-flags.h insn-codes.h system.h reload.h
1330 $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-emit.c
1331
1574 $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-emit.c
1575
1332insn-emit.c: stamp-emit ; @true
1333stamp-emit : $(md_file) genemit $(srcdir)/move-if-change
1576insn-emit.c: s-emit ; @true
1577s-emit : $(md_file) genemit $(srcdir)/move-if-change
1334 ./genemit $(md_file) > tmp-emit.c
1335 $(srcdir)/move-if-change tmp-emit.c insn-emit.c
1578 ./genemit $(md_file) > tmp-emit.c
1579 $(srcdir)/move-if-change tmp-emit.c insn-emit.c
1336 touch stamp-emit
1580 touch s-emit
1337
1581
1338insn-recog.o : insn-recog.c $(CONFIG_H) $(RTL_H) insn-config.h recog.h \
1339 real.h output.h flags.h
1582insn-recog.o : insn-recog.c $(CONFIG_H) $(RTL_H) insn-config.h $(RECOG_H) \
1583 real.h output.h flags.h system.h
1340 $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-recog.c
1341
1584 $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-recog.c
1585
1342insn-recog.c: stamp-recog ; @true
1343stamp-recog : $(md_file) genrecog $(srcdir)/move-if-change
1586insn-recog.c: s-recog ; @true
1587s-recog : $(md_file) genrecog $(srcdir)/move-if-change
1344 ./genrecog $(md_file) > tmp-recog.c
1345 $(srcdir)/move-if-change tmp-recog.c insn-recog.c
1588 ./genrecog $(md_file) > tmp-recog.c
1589 $(srcdir)/move-if-change tmp-recog.c insn-recog.c
1346 touch stamp-recog
1590 touch s-recog
1347
1348insn-opinit.o : insn-opinit.c $(CONFIG_H) $(RTL_H) insn-codes.h insn-flags.h \
1591
1592insn-opinit.o : insn-opinit.c $(CONFIG_H) $(RTL_H) insn-codes.h insn-flags.h \
1349 insn-config.h flags.h rtl.h recog.h expr.h reload.h
1593 insn-config.h flags.h $(RECOG_H) $(EXPR_H) reload.h system.h
1350 $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-opinit.c
1351
1594 $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-opinit.c
1595
1352insn-opinit.c: stamp-opinit ; @true
1353stamp-opinit : $(md_file) genopinit $(srcdir)/move-if-change
1596insn-opinit.c: s-opinit ; @true
1597s-opinit : $(md_file) genopinit $(srcdir)/move-if-change
1354 ./genopinit $(md_file) > tmp-opinit.c
1355 $(srcdir)/move-if-change tmp-opinit.c insn-opinit.c
1598 ./genopinit $(md_file) > tmp-opinit.c
1599 $(srcdir)/move-if-change tmp-opinit.c insn-opinit.c
1356 touch stamp-opinit
1600 touch s-opinit
1357
1601
1358insn-extract.o : insn-extract.c $(CONFIG_H) $(RTL_H)
1602insn-extract.o : insn-extract.c $(CONFIG_H) $(RTL_H) system.h
1359 $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-extract.c
1360
1603 $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-extract.c
1604
1361insn-extract.c: stamp-extract ; @true
1362stamp-extract : $(md_file) genextract $(srcdir)/move-if-change
1605insn-extract.c: s-extract ; @true
1606s-extract : $(md_file) genextract $(srcdir)/move-if-change
1363 ./genextract $(md_file) > tmp-extract.c
1364 $(srcdir)/move-if-change tmp-extract.c insn-extract.c
1607 ./genextract $(md_file) > tmp-extract.c
1608 $(srcdir)/move-if-change tmp-extract.c insn-extract.c
1365 touch stamp-extract
1609 touch s-extract
1366
1610
1367insn-peep.o : insn-peep.c $(CONFIG_H) $(RTL_H) regs.h output.h real.h
1611insn-peep.o : insn-peep.c $(CONFIG_H) $(RTL_H) $(REGS_H) output.h real.h system.h
1368 $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-peep.c
1369
1612 $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-peep.c
1613
1370insn-peep.c: stamp-peep ; @true
1371stamp-peep : $(md_file) genpeep $(srcdir)/move-if-change
1614insn-peep.c: s-peep ; @true
1615s-peep : $(md_file) genpeep $(srcdir)/move-if-change
1372 ./genpeep $(md_file) > tmp-peep.c
1373 $(srcdir)/move-if-change tmp-peep.c insn-peep.c
1616 ./genpeep $(md_file) > tmp-peep.c
1617 $(srcdir)/move-if-change tmp-peep.c insn-peep.c
1374 touch stamp-peep
1618 touch s-peep
1375
1619
1376insn-attrtab.o : insn-attrtab.c $(CONFIG_H) $(RTL_H) regs.h real.h output.h \
1377 insn-attr.h insn-config.h
1620insn-attrtab.o : insn-attrtab.c $(CONFIG_H) $(RTL_H) $(REGS_H) real.h output.h \
1621 insn-attr.h insn-config.h system.h
1378 $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-attrtab.c
1379
1622 $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-attrtab.c
1623
1380insn-attr.h: stamp-attr ; @true
1381stamp-attr : $(md_file) genattr $(srcdir)/move-if-change
1624insn-attr.h: s-attr ; @true
1625s-attr : $(md_file) genattr $(srcdir)/move-if-change
1382 ./genattr $(md_file) > tmp-attr.h
1383 $(srcdir)/move-if-change tmp-attr.h insn-attr.h
1626 ./genattr $(md_file) > tmp-attr.h
1627 $(srcdir)/move-if-change tmp-attr.h insn-attr.h
1384 touch stamp-attr
1628 touch s-attr
1385
1629
1386insn-attrtab.c: stamp-attrtab ; @true
1387stamp-attrtab : $(md_file) genattrtab $(srcdir)/move-if-change
1630insn-attrtab.c: s-attrtab ; @true
1631s-attrtab : $(md_file) genattrtab $(srcdir)/move-if-change
1388 if cmp -s $(PREMADE_ATTRTAB_MD) $(md_file); \
1389 then \
1390 echo Using $(PREMADE_ATTRTAB); \
1391 cp $(PREMADE_ATTRTAB) tmp-attrtab.c; \
1392 else \
1393 ./genattrtab $(md_file) > tmp-attrtab.c; \
1394 fi
1395 $(srcdir)/move-if-change tmp-attrtab.c insn-attrtab.c
1632 if cmp -s $(PREMADE_ATTRTAB_MD) $(md_file); \
1633 then \
1634 echo Using $(PREMADE_ATTRTAB); \
1635 cp $(PREMADE_ATTRTAB) tmp-attrtab.c; \
1636 else \
1637 ./genattrtab $(md_file) > tmp-attrtab.c; \
1638 fi
1639 $(srcdir)/move-if-change tmp-attrtab.c insn-attrtab.c
1396 touch stamp-attrtab
1640 touch s-attrtab
1397
1641
1398insn-output.o : insn-output.c $(CONFIG_H) $(RTL_H) regs.h real.h conditions.h \
1399 hard-reg-set.h insn-config.h insn-flags.h insn-attr.h output.h recog.h \
1400 insn-codes.h
1642insn-output.o : insn-output.c $(CONFIG_H) $(RTL_H) $(REGS_H) real.h conditions.h \
1643 hard-reg-set.h insn-config.h insn-flags.h insn-attr.h output.h $(RECOG_H) \
1644 insn-codes.h system.h
1401 $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-output.c
1402
1645 $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-output.c
1646
1403insn-output.c: stamp-output ; @true
1404stamp-output : $(md_file) genoutput $(srcdir)/move-if-change
1647insn-output.c: s-output ; @true
1648s-output : $(md_file) genoutput $(srcdir)/move-if-change
1405 ./genoutput $(md_file) > tmp-output.c
1406 $(srcdir)/move-if-change tmp-output.c insn-output.c
1649 ./genoutput $(md_file) > tmp-output.c
1650 $(srcdir)/move-if-change tmp-output.c insn-output.c
1407 touch stamp-output
1408
1651 touch s-output
1652
1653genrtl.o : genrtl.c $(CONFIG_H) $(RTL_H) system.h
1654genrtl.c genrtl.h : s-genrtl
1655 @true # force gnu make to recheck modification times.
1656
1657s-genrtl: gengenrtl $(srcdir)/move-if-change $(RTL_BASE_H)
1658 ./gengenrtl tmp-genrtl.h tmp-genrtl.c
1659 $(srcdir)/move-if-change tmp-genrtl.h genrtl.h
1660 $(srcdir)/move-if-change tmp-genrtl.c genrtl.c
1661 touch s-genrtl
1662
1663#
1409# Compile the programs that generate insn-* from the machine description.
1410# They are compiled with $(HOST_CC), and associated libraries,
1411# since they need to run on this machine
1412# even if GCC is being compiled to run on some other machine.
1413
1414# $(CONFIG_H) is omitted from the deps of the gen*.o
1415# because these programs don't really depend on anything
1416# about the target machine. They do depend on config.h itself,
1417# since that describes the host machine.
1418
1419# Pass the md file through cpp if the target requests it.
1420$(MD_FILE): $(MD_DEPS)
1421 rm -f $@
1422 $(MD_CPP) $(MD_CPPFLAGS) $(md_file) | sed 's/^# /; /g' > tmp-$@
1423 mv tmp-$@ $@
1424
1664# Compile the programs that generate insn-* from the machine description.
1665# They are compiled with $(HOST_CC), and associated libraries,
1666# since they need to run on this machine
1667# even if GCC is being compiled to run on some other machine.
1668
1669# $(CONFIG_H) is omitted from the deps of the gen*.o
1670# because these programs don't really depend on anything
1671# about the target machine. They do depend on config.h itself,
1672# since that describes the host machine.
1673
1674# Pass the md file through cpp if the target requests it.
1675$(MD_FILE): $(MD_DEPS)
1676 rm -f $@
1677 $(MD_CPP) $(MD_CPPFLAGS) $(md_file) | sed 's/^# /; /g' > tmp-$@
1678 mv tmp-$@ $@
1679
1425genconfig : genconfig.o $(HOST_RTL) $(HOST_LIBDEPS)
1680genconfig : genconfig.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBDEPS)
1426 $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
1681 $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
1427 genconfig.o $(HOST_RTL) $(HOST_LIBS)
1682 genconfig.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBS)
1428
1683
1429genconfig.o : genconfig.c $(RTL_H) $(build_xm_file)
1684genconfig.o : genconfig.c $(RTL_H) $(build_xm_file) system.h
1430 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genconfig.c
1431
1685 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genconfig.c
1686
1432genflags : genflags.o $(HOST_RTL) $(HOST_LIBDEPS)
1687genflags : genflags.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBDEPS)
1433 $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
1688 $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
1434 genflags.o $(HOST_RTL) $(HOST_LIBS)
1689 genflags.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBS)
1435
1690
1436genflags.o : genflags.c $(RTL_H) $(build_xm_file)
1691genflags.o : genflags.c $(RTL_H) $(build_xm_file) system.h
1437 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genflags.c
1438
1692 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genflags.c
1693
1439gencodes : gencodes.o $(HOST_RTL) $(HOST_LIBDEPS)
1694gencodes : gencodes.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBDEPS)
1440 $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
1695 $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
1441 gencodes.o $(HOST_RTL) $(HOST_LIBS)
1696 gencodes.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBS)
1442
1697
1443gencodes.o : gencodes.c $(RTL_H) $(build_xm_file)
1698gencodes.o : gencodes.c $(RTL_H) $(build_xm_file) system.h
1444 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/gencodes.c
1445
1699 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/gencodes.c
1700
1446genemit : genemit.o $(HOST_RTL) $(HOST_LIBDEPS)
1701genemit : genemit.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBDEPS)
1447 $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
1702 $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
1448 genemit.o $(HOST_RTL) $(HOST_LIBS)
1703 genemit.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBS)
1449
1704
1450genemit.o : genemit.c $(RTL_H) $(build_xm_file)
1705genemit.o : genemit.c $(RTL_H) $(build_xm_file) system.h
1451 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genemit.c
1452
1706 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genemit.c
1707
1453genopinit : genopinit.o $(HOST_RTL) $(HOST_LIBDEPS)
1708genopinit : genopinit.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBDEPS)
1454 $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
1709 $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
1455 genopinit.o $(HOST_RTL) $(HOST_LIBS)
1710 genopinit.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBS)
1456
1711
1457genopinit.o : genopinit.c $(RTL_H) $(build_xm_file)
1712genopinit.o : genopinit.c $(RTL_H) $(build_xm_file) system.h
1458 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genopinit.c
1459
1713 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genopinit.c
1714
1460genrecog : genrecog.o $(HOST_RTL) $(HOST_LIBDEPS)
1715genrecog : genrecog.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBDEPS)
1461 $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
1716 $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
1462 genrecog.o $(HOST_RTL) $(HOST_LIBS)
1717 genrecog.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBS)
1463
1718
1464genrecog.o : genrecog.c $(RTL_H) $(build_xm_file)
1719genrecog.o : genrecog.c $(RTL_H) $(build_xm_file) system.h
1465 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genrecog.c
1466
1720 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genrecog.c
1721
1467genextract : genextract.o $(HOST_RTL) $(HOST_LIBDEPS)
1722genextract : genextract.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBDEPS)
1468 $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
1723 $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
1469 genextract.o $(HOST_RTL) $(HOST_LIBS)
1724 genextract.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBS)
1470
1725
1471genextract.o : genextract.c $(RTL_H) $(build_xm_file) insn-config.h
1726genextract.o : genextract.c $(RTL_H) $(build_xm_file) system.h insn-config.h
1472 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genextract.c
1473
1727 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genextract.c
1728
1474genpeep : genpeep.o $(HOST_RTL) $(HOST_LIBDEPS)
1729genpeep : genpeep.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBDEPS)
1475 $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
1730 $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
1476 genpeep.o $(HOST_RTL) $(HOST_LIBS)
1731 genpeep.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBS)
1477
1732
1478genpeep.o : genpeep.c $(RTL_H) $(build_xm_file)
1733genpeep.o : genpeep.c $(RTL_H) $(build_xm_file) system.h
1479 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genpeep.c
1480
1734 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genpeep.c
1735
1481genattr : genattr.o $(HOST_RTL) $(HOST_LIBDEPS)
1736genattr : genattr.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBDEPS)
1482 $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
1737 $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
1483 genattr.o $(HOST_RTL) $(HOST_LIBS)
1738 genattr.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBS)
1484
1739
1485genattr.o : genattr.c $(RTL_H) $(build_xm_file)
1740genattr.o : genattr.c $(RTL_H) $(build_xm_file) system.h
1486 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genattr.c
1487
1488genattrtab : genattrtab.o $(HOST_RTL) $(HOST_PRINT) $(HOST_RTLANAL) $(HOST_LIBDEPS)
1489 $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
1490 genattrtab.o $(HOST_RTL) $(HOST_PRINT) $(HOST_RTLANAL) $(HOST_LIBS)
1491
1741 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genattr.c
1742
1743genattrtab : genattrtab.o $(HOST_RTL) $(HOST_PRINT) $(HOST_RTLANAL) $(HOST_LIBDEPS)
1744 $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
1745 genattrtab.o $(HOST_RTL) $(HOST_PRINT) $(HOST_RTLANAL) $(HOST_LIBS)
1746
1492genattrtab.o : genattrtab.c $(RTL_H) $(build_xm_file) insn-config.h
1747genattrtab.o : genattrtab.c $(RTL_H) $(build_xm_file) system.h insn-config.h
1493 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genattrtab.c
1494
1748 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genattrtab.c
1749
1495genoutput : genoutput.o $(HOST_RTL) $(HOST_LIBDEPS)
1750genoutput : genoutput.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBDEPS)
1496 $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
1751 $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
1497 genoutput.o $(HOST_RTL) $(HOST_LIBS)
1752 genoutput.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBS)
1498
1753
1499genoutput.o : genoutput.c $(RTL_H) $(build_xm_file)
1754genoutput.o : genoutput.c $(RTL_H) $(build_xm_file) system.h
1500 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genoutput.c
1755 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genoutput.c
1501
1756
1757gengenrtl : gengenrtl.o $(HOST_LIBDEPS)
1758 $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
1759 gengenrtl.o $(HOST_LIBS)
1760
1761gengenrtl.o : gengenrtl.c $(RTL_BASE_H) system.h
1762 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/gengenrtl.c
1763
1764#
1502# Compile the libraries to be used by gen*.
1503# If we are not cross-building, gen* use the same .o's that cc1 will use,
1504# and HOST_PREFIX_1 is `foobar', just to ensure these rules don't conflict
1505# with the rules for rtl.o, alloca.o, etc.
1765# Compile the libraries to be used by gen*.
1766# If we are not cross-building, gen* use the same .o's that cc1 will use,
1767# and HOST_PREFIX_1 is `foobar', just to ensure these rules don't conflict
1768# with the rules for rtl.o, alloca.o, etc.
1506$(HOST_PREFIX_1)rtl.o: $(srcdir)/rtl.c $(CONFIG_H) $(RTL_H)
1769$(HOST_PREFIX_1)rtl.o: $(srcdir)/rtl.c $(CONFIG_H) system.h $(RTL_H) bitmap.h
1507 rm -f $(HOST_PREFIX)rtl.c
1508 sed -e 's/config[.]h/hconfig.h/' $(srcdir)/rtl.c > $(HOST_PREFIX)rtl.c
1509 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)rtl.c
1510
1511$(HOST_PREFIX_1)print-rtl.o: $(srcdir)/print-rtl.c $(CONFIG_H) $(RTL_H)
1512 rm -f $(HOST_PREFIX)print-rtl.c
1513 sed -e 's/config[.]h/hconfig.h/' $(srcdir)/print-rtl.c > $(HOST_PREFIX)print-rtl.c
1514 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)print-rtl.c
1515
1770 rm -f $(HOST_PREFIX)rtl.c
1771 sed -e 's/config[.]h/hconfig.h/' $(srcdir)/rtl.c > $(HOST_PREFIX)rtl.c
1772 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)rtl.c
1773
1774$(HOST_PREFIX_1)print-rtl.o: $(srcdir)/print-rtl.c $(CONFIG_H) $(RTL_H)
1775 rm -f $(HOST_PREFIX)print-rtl.c
1776 sed -e 's/config[.]h/hconfig.h/' $(srcdir)/print-rtl.c > $(HOST_PREFIX)print-rtl.c
1777 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)print-rtl.c
1778
1779$(HOST_PREFIX_1)bitmap.o: $(srcdir)/bitmap.c $(CONFIG_H) system.h $(RTL_H) \
1780 flags.h $(BASIC_BLOCK_H) $(REGS_H)
1781 rm -f $(HOST_PREFIX)bitmap.c
1782 sed -e 's/config[.]h/hconfig.h/' $(srcdir)/bitmap.c > $(HOST_PREFIX)bitmap.c
1783 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)bitmap.c
1784
1516$(HOST_PREFIX_1)rtlanal.o: $(srcdir)/rtlanal.c $(CONFIG_H) $(RTL_H)
1517 rm -f $(HOST_PREFIX)rtlanal.c
1518 sed -e 's/config[.]h/hconfig.h/' $(srcdir)/rtlanal.c > $(HOST_PREFIX)rtlanal.c
1519 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)rtlanal.c
1520
1521$(HOST_PREFIX_1)alloca.o: alloca.c
1522 rm -f $(HOST_PREFIX)alloca.c
1523 cp $(srcdir)/alloca.c $(HOST_PREFIX)alloca.c
1524 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)alloca.c
1525
1526$(HOST_PREFIX_1)obstack.o: obstack.c
1527 rm -f $(HOST_PREFIX)obstack.c
1528 sed -e 's/config[.]h/hconfig.h/' $(srcdir)/obstack.c > $(HOST_PREFIX)obstack.c
1529 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)obstack.c
1530
1785$(HOST_PREFIX_1)rtlanal.o: $(srcdir)/rtlanal.c $(CONFIG_H) $(RTL_H)
1786 rm -f $(HOST_PREFIX)rtlanal.c
1787 sed -e 's/config[.]h/hconfig.h/' $(srcdir)/rtlanal.c > $(HOST_PREFIX)rtlanal.c
1788 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)rtlanal.c
1789
1790$(HOST_PREFIX_1)alloca.o: alloca.c
1791 rm -f $(HOST_PREFIX)alloca.c
1792 cp $(srcdir)/alloca.c $(HOST_PREFIX)alloca.c
1793 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)alloca.c
1794
1795$(HOST_PREFIX_1)obstack.o: obstack.c
1796 rm -f $(HOST_PREFIX)obstack.c
1797 sed -e 's/config[.]h/hconfig.h/' $(srcdir)/obstack.c > $(HOST_PREFIX)obstack.c
1798 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)obstack.c
1799
1800$(HOST_PREFIX_1)vfprintf.o: vfprintf.c
1801 rm -f $(HOST_PREFIX)vfprintf.c
1802 sed -e 's/config[.]h/hconfig.h/' $(srcdir)/vfprintf.c > $(HOST_PREFIX)vfprintf.c
1803 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)vfprintf.c
1804
1805$(HOST_PREFIX_1)doprint.o: doprint.c
1806 rm -f $(HOST_PREFIX)doprint.c
1807 sed -e 's/config[.]h/hconfig.h/' $(srcdir)/doprint.c > $(HOST_PREFIX)doprint.c
1808 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)doprint.c
1809
1531$(HOST_PREFIX_1)malloc.o: malloc.c
1532 rm -f $(HOST_PREFIX)malloc.c
1533 sed -e 's/config[.]h/hconfig.h/' $(srcdir)/malloc.c > $(HOST_PREFIX)malloc.c
1534 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)malloc.c
1535
1536# This satisfies the dependency that we get if you cross-compile a compiler
1537# that does not need to compile alloca, malloc or whatever.
1538$(HOST_PREFIX_1):
1539 touch $(HOST_PREFIX_1)
1810$(HOST_PREFIX_1)malloc.o: malloc.c
1811 rm -f $(HOST_PREFIX)malloc.c
1812 sed -e 's/config[.]h/hconfig.h/' $(srcdir)/malloc.c > $(HOST_PREFIX)malloc.c
1813 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)malloc.c
1814
1815# This satisfies the dependency that we get if you cross-compile a compiler
1816# that does not need to compile alloca, malloc or whatever.
1817$(HOST_PREFIX_1):
1818 touch $(HOST_PREFIX_1)
1540
1541# Remake bytecode files.
1542BI_OBJ=bi-parser.o bi-lexer.o bi-reverse.o
1543
1819
1544bc-emit.o : bc-emit.c $(CONFIG_H) $(RTL_H) real.h $(BYTECODE_H) \
1545 bc-arity.h bc-opcode.h bc-typecd.h bc-typecd.def bi-run.h bytetypes.h
1546bc-optab.o : bc-optab.c $(CONFIG_H) $(REAL_H) $(BYTECODE_H) \
1547 bc-opcode.h bc-typecd.h bc-typecd.def
1548
1549bi-arity: bi-arity.o $(BI_OBJ) $(HOST_LIBDEPS)
1550 $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
1551 bi-arity.o $(BI_OBJ) $(HOST_LIBS)
1552bi-opcode: bi-opcode.o $(BI_OBJ) $(HOST_LIBDEPS)
1553 $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
1554 bi-opcode.o $(BI_OBJ) $(HOST_LIBS)
1555bi-opname: bi-opname.o $(BI_OBJ) $(HOST_LIBDEPS)
1556 $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
1557 bi-opname.o $(BI_OBJ) $(HOST_LIBS)
1558
1559$(srcdir)/bi-parser.h: $(srcdir)/bi-parser.c
1560$(srcdir)/bi-parser.c: $(srcdir)/bi-parser.y
1561 cd $(srcdir); $(BISON) $(BISONFLAGS) -d bi-parser.y -o bi-parser.c
1562
1563bi-parser.o: $(srcdir)/bi-parser.c bi-defs.h $(build_xm_file)
1564 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) \
1565 $(srcdir)/bi-parser.c
1566bi-lexer.o: bi-lexer.c $(srcdir)/bi-parser.h $(build_xm_file)
1567 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) \
1568 $(srcdir)/bi-lexer.c
1569bi-arity.o: bi-arity.c bi-defs.h $(build_xm_file)
1570 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) \
1571 $(srcdir)/bi-arity.c
1572bi-opcode.o: bi-opcode.c bi-defs.h $(build_xm_file)
1573 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) \
1574 $(srcdir)/bi-opcode.c
1575bi-opname.o: bi-opname.c bi-defs.h $(build_xm_file)
1576 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) \
1577 $(srcdir)/bi-opname.c
1578bi-reverse.o: bi-reverse.c bi-defs.h
1579 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) \
1580 $(srcdir)/bi-reverse.c
1581
1582bc-arity.h: stamp-bcarity ; @true
1583stamp-bcarity : $(srcdir)/bytecode.def bi-arity $(srcdir)/move-if-change
1584 ./bi-arity < $(srcdir)/bytecode.def >tmp-bc-arity.h
1585 $(srcdir)/move-if-change tmp-bc-arity.h bc-arity.h
1586 touch stamp-bcarity
1587
1588bc-opcode.h: stamp-bcopcode ; @true
1589stamp-bcopcode : $(srcdir)/bytecode.def bi-opcode $(srcdir)/move-if-change
1590 ./bi-opcode < $(srcdir)/bytecode.def >tmp-bcopcd.h
1591 $(srcdir)/move-if-change tmp-bcopcd.h bc-opcode.h
1592 touch stamp-bcopcode
1593
1594bc-opname.h: stamp-bcopname ; @true
1595stamp-bcopname : $(srcdir)/bytecode.def bi-opname $(srcdir)/move-if-change
1596 ./bi-opname < $(srcdir)/bytecode.def >tmp-bcopnm.h
1597 $(srcdir)/move-if-change tmp-bcopnm.h bc-opname.h
1598 touch stamp-bcopname
1599
1600bytecode.mostlyclean:
1601 -rm -f bc-arity.h bc-opcode.h bc-opname.h
1602
1603bytecode.distclean bytecode.clean: bytecode.mostlyclean
1604 -rm -f bi-arity bi-opcode bi-opname bi-lexer
1605
1606bytecode.maintainer-clean: bytecode.clean
1607 -rm -f bi-parser.c bi-parser.h
1608
1609
1820#
1610# Remake cpp and protoize.
1611
1612# Making the preprocessor
1821# Remake cpp and protoize.
1822
1823# Making the preprocessor
1613cpp: $(CCCP)
1824cpp$(exeext): $(CCCP)$(exeext)
1614 -rm -f cpp$(exeext)
1825 -rm -f cpp$(exeext)
1615 ln $(CCCP)$(exeext) cpp$(exeext) > /dev/null 2>&1 \
1616 || cp $(CCCP)$(exeext) cpp$(exeext)
1617cccp: cccp.o cexp.o version.o $(LIBDEPS)
1618 $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ cccp.o cexp.o \
1826 $(LN) $(CCCP)$(exeext) cpp$(exeext)
1827cccp$(exeext): cccp.o cexp.o version.o prefix.o $(LIBDEPS)
1828 $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ cccp.o cexp.o prefix.o \
1619 version.o $(LIBS)
1829 version.o $(LIBS)
1620cexp.o: $(srcdir)/cexp.c $(CONFIG_H)
1830cexp.o: $(srcdir)/cexp.c $(CONFIG_H) system.h gansidecl.h
1621 $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c $(srcdir)/cexp.c
1622$(srcdir)/cexp.c: $(srcdir)/cexp.y
1623 cd $(srcdir); $(BISON) -o cexp.c cexp.y
1624
1831 $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c $(srcdir)/cexp.c
1832$(srcdir)/cexp.c: $(srcdir)/cexp.y
1833 cd $(srcdir); $(BISON) -o cexp.c cexp.y
1834
1625cccp.o: cccp.c $(CONFIG_H) pcp.h version.c config.status
1626# The reason we use $(libdir)/g++-include rather than using libsubdir
1627# is for compatibility with the current version of libg++.
1835cccp.o: cccp.c $(CONFIG_H) pcp.h version.c config.status system.h gansidecl.h
1628 $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
1629 -DGCC_INCLUDE_DIR=\"$(libsubdir)/include\" \
1630 -DGPLUSPLUS_INCLUDE_DIR=\"$(gxx_include_dir)\" \
1836 $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
1837 -DGCC_INCLUDE_DIR=\"$(libsubdir)/include\" \
1838 -DGPLUSPLUS_INCLUDE_DIR=\"$(gxx_include_dir)\" \
1839 -DOLD_GPLUSPLUS_INCLUDE_DIR=\"$(old_gxx_include_dir)\" \
1631 -DLOCAL_INCLUDE_DIR=\"$(includedir)\" \
1840 -DLOCAL_INCLUDE_DIR=\"$(includedir)\" \
1632 -DCROSS_INCLUDE_DIR=\"$(libsubdir)/sys-include\" \
1841 -DCROSS_INCLUDE_DIR=\"$(tooldir)/sys-include\" \
1633 -DTOOL_INCLUDE_DIR=\"$(tooldir)/include\" \
1634 -c `echo $(srcdir)/cccp.c | sed 's,^\./,,'`
1635
1842 -DTOOL_INCLUDE_DIR=\"$(tooldir)/include\" \
1843 -c `echo $(srcdir)/cccp.c | sed 's,^\./,,'`
1844
1636cppmain: cppmain.o cpplib.o cpphash.o cppalloc.o cpperror.o cppexp.o \
1637 version.o $(LIBDEPS)
1845cppmain$(exeext): cppmain.o cpplib.o cpphash.o cppalloc.o cpperror.o cppexp.o \
1846 prefix.o version.o $(LIBDEPS)
1638 $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ cppmain.o cpplib.o cpphash.o \
1847 $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ cppmain.o cpplib.o cpphash.o \
1639 cppalloc.o cpperror.o cppexp.o version.o $(LIBS)
1848 cppalloc.o cpperror.o cppexp.o prefix.o version.o $(LIBS)
1640
1849
1641cpplib.o: cpplib.c $(CONFIG_H) cpplib.h cpphash.h config.status
1850cppmain.o: cppmain.c $(CONFIG_H) cpplib.h system.h gansidecl.h
1851
1852cpplib.o: cpplib.c $(CONFIG_H) cpplib.h cpphash.h config.status system.h \
1853 gansidecl.h
1642 $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
1643 -DGCC_INCLUDE_DIR=\"$(libsubdir)/include\" \
1644 -DGPLUSPLUS_INCLUDE_DIR=\"$(gxx_include_dir)\" \
1854 $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
1855 -DGCC_INCLUDE_DIR=\"$(libsubdir)/include\" \
1856 -DGPLUSPLUS_INCLUDE_DIR=\"$(gxx_include_dir)\" \
1857 -DOLD_GPLUSPLUS_INCLUDE_DIR=\"$(old_gxx_include_dir)\" \
1645 -DLOCAL_INCLUDE_DIR=\"$(includedir)\" \
1858 -DLOCAL_INCLUDE_DIR=\"$(includedir)\" \
1646 -DCROSS_INCLUDE_DIR=\"$(libsubdir)/sys-include\" \
1859 -DCROSS_INCLUDE_DIR=\"$(tooldir)/sys-include\" \
1647 -DTOOL_INCLUDE_DIR=\"$(tooldir)/include\" \
1648 -c `echo $(srcdir)/cpplib.c | sed 's,^\./,,'`
1649
1860 -DTOOL_INCLUDE_DIR=\"$(tooldir)/include\" \
1861 -c `echo $(srcdir)/cpplib.c | sed 's,^\./,,'`
1862
1650cpperror.o: cpperror.c $(CONFIG_H) cpplib.h
1863cpperror.o: cpperror.c $(CONFIG_H) cpplib.h system.h gansidecl.h
1651
1864
1652cppexp.o: cppexp.c $(CONFIG_H) cpplib.h
1865cppexp.o: cppexp.c $(CONFIG_H) cpplib.h system.h gansidecl.h
1653
1866
1654cpphash.o: cpphash.c cpplib.h cpphash.h
1867cpphash.o: cpphash.c cpplib.h cpphash.h $(CONFIG_H) system.h gansidecl.h
1655
1868
1656cppalloc.o: cppalloc.c $(CONFIG_H)
1869cppalloc.o: cppalloc.c $(CONFIG_H) cpplib.h system.h gansidecl.h
1657
1658# Note for the stamp targets, we run the program `true' instead of
1659# having an empty command (nothing following the semicolon).
1660
1870
1871# Note for the stamp targets, we run the program `true' instead of
1872# having an empty command (nothing following the semicolon).
1873
1661proto: config.status protoize unprotoize SYSCALLS.c.X
1874proto: config.status protoize$(exeext) unprotoize$(exeext) SYSCALLS.c.X
1662
1875
1663protoize: protoize.o getopt.o getopt1.o getpwd.o version.o $(LIBDEPS)
1876protoize$(exeext): protoize.o getopt.o getopt1.o getpwd.o version.o \
1877 pexecute.o choose-temp.o mkstemp.o $(LIBDEPS)
1664 $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ \
1878 $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ \
1665 protoize.o getopt.o getopt1.o getpwd.o version.o $(LIBS)
1666protoize.o: stamp-proto ; @true
1879 protoize.o getopt.o getopt1.o getpwd.o version.o \
1880 pexecute.o choose-temp.o mkstemp.o $(LIBS)
1667
1881
1668unprotoize: unprotoize.o getopt.o getopt1.o getpwd.o version.o $(LIBDEPS)
1882unprotoize$(exeext): unprotoize.o getopt.o getopt1.o getpwd.o version.o \
1883 pexecute.o choose-temp.o mkstemp.o $(LIBDEPS)
1669 $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ \
1884 $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ \
1670 unprotoize.o getopt.o getopt1.o getpwd.o version.o $(LIBS)
1671unprotoize.o: stamp-proto ; @true
1885 unprotoize.o getopt.o getopt1.o getpwd.o version.o \
1886 pexecute.o choose-temp.o mkstemp.o $(LIBS)
1672
1887
1673stamp-proto: protoize.c getopt.h $(CONFIG_H)
1888protoize.o: protoize.c getopt.h $(CONFIG_H) system.h
1674 $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
1675 -DGCC_INCLUDE_DIR=\"$(libsubdir)/include\" \
1676 -DGPLUSPLUS_INCLUDE_DIR=\"$(gxx_include_dir)\" \
1889 $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
1890 -DGCC_INCLUDE_DIR=\"$(libsubdir)/include\" \
1891 -DGPLUSPLUS_INCLUDE_DIR=\"$(gxx_include_dir)\" \
1677 -DCROSS_INCLUDE_DIR=\"$(libsubdir)/sys-include\" \
1892 -DCROSS_INCLUDE_DIR=\"$(tooldir)/sys-include\" \
1678 -DTOOL_INCLUDE_DIR=\"$(tooldir)/include\" \
1679 -DLOCAL_INCLUDE_DIR=\"$(includedir)\" \
1680 -DSTD_PROTO_DIR=\"$(libsubdir)\" \
1893 -DTOOL_INCLUDE_DIR=\"$(tooldir)/include\" \
1894 -DLOCAL_INCLUDE_DIR=\"$(includedir)\" \
1895 -DSTD_PROTO_DIR=\"$(libsubdir)\" \
1681 -DUNPROTOIZE $(srcdir)/protoize.c
1682 mv protoize$(objext) unprotoize$(objext)
1896 $(srcdir)/protoize.c
1897
1898unprotoize.o: unprotoize.c protoize.c getopt.h $(CONFIG_H) system.h
1683 $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
1684 -DGCC_INCLUDE_DIR=\"$(libsubdir)/include\" \
1685 -DGPLUSPLUS_INCLUDE_DIR=\"$(gxx_include_dir)\" \
1899 $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
1900 -DGCC_INCLUDE_DIR=\"$(libsubdir)/include\" \
1901 -DGPLUSPLUS_INCLUDE_DIR=\"$(gxx_include_dir)\" \
1686 -DCROSS_INCLUDE_DIR=\"$(libsubdir)/sys-include\" \
1902 -DCROSS_INCLUDE_DIR=\"$(tooldir)/sys-include\" \
1687 -DTOOL_INCLUDE_DIR=\"$(tooldir)/include\" \
1688 -DLOCAL_INCLUDE_DIR=\"$(includedir)\" \
1689 -DSTD_PROTO_DIR=\"$(libsubdir)\" \
1903 -DTOOL_INCLUDE_DIR=\"$(tooldir)/include\" \
1904 -DLOCAL_INCLUDE_DIR=\"$(includedir)\" \
1905 -DSTD_PROTO_DIR=\"$(libsubdir)\" \
1690 $(srcdir)/protoize.c
1691 touch stamp-proto
1906 $(srcdir)/unprotoize.c
1692
1693getopt.o: getopt.c getopt.h
1694 $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(srcdir)/getopt.c
1695getopt1.o: getopt1.c getopt.h
1696 $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(srcdir)/getopt1.c
1697
1698# This info describes the target machine, so compile with GCC just built.
1699SYSCALLS.c.X: $(srcdir)/sys-types.h $(srcdir)/sys-protos.h $(GCC_PASSES) \

--- 24 unchanged lines hidden (view full) ---

1724 -DGCC_INCLUDE_DIR=0 \
1725 -DGPLUSPLUS_INCLUDE_DIR=0 \
1726 -DCROSS_INCLUDE_DIR=0 \
1727 -DTOOL_INCLUDE_DIR=0 \
1728 -DSTD_PROTO_DIR=0" tmp-proto.c
1729 @echo Expect zero differences.
1730 diff $(srcdir)/protoize.c tmp-proto.c | cat
1731 -rm -f tmp-proto.[cs] tmp-proto$(objext)
1907
1908getopt.o: getopt.c getopt.h
1909 $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(srcdir)/getopt.c
1910getopt1.o: getopt1.c getopt.h
1911 $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(srcdir)/getopt1.c
1912
1913# This info describes the target machine, so compile with GCC just built.
1914SYSCALLS.c.X: $(srcdir)/sys-types.h $(srcdir)/sys-protos.h $(GCC_PASSES) \

--- 24 unchanged lines hidden (view full) ---

1939 -DGCC_INCLUDE_DIR=0 \
1940 -DGPLUSPLUS_INCLUDE_DIR=0 \
1941 -DCROSS_INCLUDE_DIR=0 \
1942 -DTOOL_INCLUDE_DIR=0 \
1943 -DSTD_PROTO_DIR=0" tmp-proto.c
1944 @echo Expect zero differences.
1945 diff $(srcdir)/protoize.c tmp-proto.c | cat
1946 -rm -f tmp-proto.[cs] tmp-proto$(objext)
1732
1947
1948gcov.o: gcov.c gcov-io.h system.h
1949
1950# Only one of 'gcov' or 'gcov.exe' is actually built, depending
1951# upon whether $(exeext) is empty or not.
1952gcov$(exeext): gcov.o $(LIBDEPS)
1953 $(CC) $(ALL_CFLAGS) $(LDFLAGS) gcov.o $(LIBS) -o $@
1954#
1733# Build the include directory. The stamp files are stmp-* rather than
1955# Build the include directory. The stamp files are stmp-* rather than
1734# stamp-* so that mostlyclean does not force the include directory to
1956# s-* so that mostlyclean does not force the include directory to
1735# be rebuilt.
1736
1957# be rebuilt.
1958
1737# Build the include directory except for float.h (which depends upon
1959# Build the include directory including float.h (which no longer depends upon
1738# enquire).
1960# enquire).
1739stmp-int-hdrs: stmp-fixinc $(USER_H) xlimits.h objc-headers
1961stmp-int-hdrs: stmp-fixinc $(USER_H) xlimits.h gfloat.h
1740# Copy in the headers provided with gcc.
1741# The sed command gets just the last file name component;
1742# this is necessary because VPATH could add a dirname.
1743# Using basename would be simpler, but some systems don't have it.
1962# Copy in the headers provided with gcc.
1963# The sed command gets just the last file name component;
1964# this is necessary because VPATH could add a dirname.
1965# Using basename would be simpler, but some systems don't have it.
1744 objdir=`pwd`; \
1745 cd $(srcdir); \
1966# The touch command is here to workaround an AIX/Linux NFS bug.
1746 for file in .. $(USER_H); do \
1747 if [ X$$file != X.. ]; then \
1748 realfile=`echo $$file | sed -e 's|.*/\([^/]*\)$$|\1|'`; \
1967 for file in .. $(USER_H); do \
1968 if [ X$$file != X.. ]; then \
1969 realfile=`echo $$file | sed -e 's|.*/\([^/]*\)$$|\1|'`; \
1749 rm -f $$objdir/include/$$realfile; \
1750 cp ginclude/$$realfile $$objdir/include; \
1751 chmod a+r $$objdir/include/$$realfile; \
1970 touch include/$$realfile; \
1971 rm -f include/$$realfile; \
1972 cp $$file include; \
1973 chmod a+r include/$$realfile; \
1752 fi; \
1753 done
1754 rm -f include/limits.h
1755 cp xlimits.h include/limits.h
1756 chmod a+r include/limits.h
1974 fi; \
1975 done
1976 rm -f include/limits.h
1977 cp xlimits.h include/limits.h
1978 chmod a+r include/limits.h
1979 rm -f include/float.h
1980 if [ -s gfloat.h ]; then \
1981 cp gfloat.h include/float.h && \
1982 chmod a+r include/float.h; \
1983 else :; fi
1757# Install the README
1758 rm -f include/README
1759 cp $(srcdir)/README-fixinc include/README
1760 chmod a+r include/README
1984# Install the README
1985 rm -f include/README
1986 cp $(srcdir)/README-fixinc include/README
1987 chmod a+r include/README
1761 touch stmp-int-hdrs
1988 touch $@
1762
1989
1763# Build the complete include directory.
1764stmp-headers: stmp-int-hdrs gfloat.h
1765 rm -f include/float.h
1766 cp gfloat.h include/float.h
1767 chmod a+r include/float.h
1768 touch stmp-headers
1990# Now that gfloat.h no longer depends upon enquire, this is actually a no-op.
1991stmp-headers:
1992 touch $@
1769
1993
1994fixinc.sh :
1995 DEST=`cd $(srcdir) ; pwd`/$@ CC=$(CC) MAKE=$(MAKE) CFLAGS="$(CFLAGS)" \
1996 export DEST CC MAKE CFLAGS ; \
1997 echo DEST=$$DEST CC=$$CC MAKE=$$MAKE CFLAGS=$$CFLAGS ; \
1998 cd ../contrib/fixinc ; \
1999 $(SHELL) mkfixinc.sh $(target) $$DEST
2000
1770# Build fixed copies of system files.
1771stmp-fixinc: $(FIXINCLUDES) gsyslimits.h
1772 rm -rf include
1773 mkdir include
1774 if [ x$(FIXINCLUDES) != xMakefile.in ]; \
1775 then \
1776 for dir in $(SYSTEM_HEADER_DIR) $(OTHER_FIXINCLUDES_DIRS); do \
1777 if [ -d $$dir ]; \
1778 then \
1779 $(SHELL) $(srcdir)/$(FIXINCLUDES) include $$dir; \
1780 else true; fi; \
1781 done; \
2001# Build fixed copies of system files.
2002stmp-fixinc: $(FIXINCLUDES) gsyslimits.h
2003 rm -rf include
2004 mkdir include
2005 if [ x$(FIXINCLUDES) != xMakefile.in ]; \
2006 then \
2007 for dir in $(SYSTEM_HEADER_DIR) $(OTHER_FIXINCLUDES_DIRS); do \
2008 if [ -d $$dir ]; \
2009 then \
2010 $(SHELL) $(srcdir)/$(FIXINCLUDES) include $$dir; \
2011 else true; fi; \
2012 done; \
2013 if [ x$(INSTALL_ASSERT_H) != x ] ; \
2014 then \
2015 rm -f include/assert.h; \
2016 cp $(srcdir)/assert.h include/assert.h; \
2017 chmod a+r include/assert.h; \
2018 fi \
1782 else true; \
1783 fi
1784 rm -f include/syslimits.h
1785 if [ -f include/limits.h ]; then \
1786 mv include/limits.h include/syslimits.h; \
1787 else \
1788 cp $(srcdir)/gsyslimits.h include/syslimits.h; \
1789 fi
1790 chmod a+r include/syslimits.h
1791 touch stmp-fixinc
1792
2019 else true; \
2020 fi
2021 rm -f include/syslimits.h
2022 if [ -f include/limits.h ]; then \
2023 mv include/limits.h include/syslimits.h; \
2024 else \
2025 cp $(srcdir)/gsyslimits.h include/syslimits.h; \
2026 fi
2027 chmod a+r include/syslimits.h
2028 touch stmp-fixinc
2029
1793# copy objc header files into build directory
1794objc-headers: stmp-fixinc
1795 if [ -d include ]; then true; else mkdir include; fi
1796 if [ -d objc ]; then true; else mkdir objc; fi
1797 thisdir1=`pwd`; \
1798 srcdir1=`cd $(srcdir); pwd`; \
1799 cd objc; \
1800 $(MAKE) -f $${srcdir1}/objc/Makefile copy-headers \
1801 srcdir=$${srcdir1} tooldir=$(tooldir) AR="$(AR)" AR_FLAGS="$(AR_FLAGS)" \
1802 GCC_FOR_TARGET="$${thisdir1}/xgcc -B$${thisdir1}/" \
1803 GCC_CFLAGS="$(GCC_CFLAGS)" incinstalldir=$${thisdir1}/include
1804 touch objc-headers
1805
1806# Files related to the fixproto script.
1807
1808deduced.h: $(GCC_PASSES) $(srcdir)/scan-types.sh stmp-int-hdrs
2030# Files related to the fixproto script.
2031
2032deduced.h: $(GCC_PASSES) $(srcdir)/scan-types.sh stmp-int-hdrs
1809 CC="$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) -I. -I$(srcdir) -Iinclude -I${SYSTEM_HEADER_DIR}"; \
2033 if [ -d $(SYSTEM_HEADER_DIR) ]; \
2034 then \
2035 CC="$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) -I. -I$(srcdir) -Iinclude -I${SYSTEM_HEADER_DIR}"; \
1810 export CC; \
2036 export CC; \
1811 $(SHELL) $(srcdir)/scan-types.sh "$(srcdir)" >tmp-deduced.h
1812 mv tmp-deduced.h deduced.h
2037 $(SHELL) $(srcdir)/scan-types.sh "$(srcdir)" >tmp-deduced.h; \
2038 mv tmp-deduced.h deduced.h; \
2039 else \
2040 touch deduced.h; \
2041 fi
1813
1814gen-protos: gen-protos.o scan.o cppalloc.o $(HOST_LIBDEPS)
1815 ${HOST_CC} $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
1816 gen-protos.o scan.o cppalloc.o $(HOST_LIBS)
1817
2042
2043gen-protos: gen-protos.o scan.o cppalloc.o $(HOST_LIBDEPS)
2044 ${HOST_CC} $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
2045 gen-protos.o scan.o cppalloc.o $(HOST_LIBS)
2046
1818gen-protos.o: gen-protos.c scan.h $(build_xm_file)
2047gen-protos.o: gen-protos.c scan.h $(build_xm_file) system.h
1819 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/gen-protos.c
1820
2048 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/gen-protos.c
2049
1821scan.o: scan.c scan.h $(build_xm_file)
2050scan.o: scan.c scan.h $(build_xm_file) system.h
1822 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/scan.c
1823
1824xsys-protos.h: $(GCC_PASSES) $(srcdir)/sys-protos.h deduced.h gen-protos Makefile
1825 cat deduced.h $(srcdir)/sys-protos.h > tmp-fixtmp.c
1826 mv tmp-fixtmp.c fixtmp.c
1827 $(GCC_FOR_TARGET) fixtmp.c -w -U__SIZE_TYPE__ -U__PTRDIFF_TYPE__ -U__WCHAR_TYPE__ -E \
1828 | sed -e 's/ / /g' -e 's/ *(/ (/g' -e 's/ [ ]*/ /g' -e 's/( )/()/' \
1829 | ./gen-protos >xsys-protos.hT
1830 mv xsys-protos.hT xsys-protos.h
1831 rm -rf fixtmp.c
1832
1833fix-header: fix-header.o scan-decls.o scan.o xsys-protos.h $(HOST_LIBDEPS) \
2051 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/scan.c
2052
2053xsys-protos.h: $(GCC_PASSES) $(srcdir)/sys-protos.h deduced.h gen-protos Makefile
2054 cat deduced.h $(srcdir)/sys-protos.h > tmp-fixtmp.c
2055 mv tmp-fixtmp.c fixtmp.c
2056 $(GCC_FOR_TARGET) fixtmp.c -w -U__SIZE_TYPE__ -U__PTRDIFF_TYPE__ -U__WCHAR_TYPE__ -E \
2057 | sed -e 's/ / /g' -e 's/ *(/ (/g' -e 's/ [ ]*/ /g' -e 's/( )/()/' \
2058 | ./gen-protos >xsys-protos.hT
2059 mv xsys-protos.hT xsys-protos.h
2060 rm -rf fixtmp.c
2061
2062fix-header: fix-header.o scan-decls.o scan.o xsys-protos.h $(HOST_LIBDEPS) \
1834 cpplib.o cpphash.o cppalloc.o cppexp.o cpperror.o version.o
2063 cpplib.o cpphash.o cppalloc.o cppexp.o prefix.o version.o
1835 $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ fix-header.o \
2064 $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ fix-header.o \
1836 scan-decls.o scan.o cpplib.o cpphash.o cppalloc.o version.o \
1837 cppexp.o $(HOST_LIBS)
2065 scan-decls.o scan.o cpplib.o cpphash.o cppalloc.o prefix.o \
2066 version.o cppexp.o $(HOST_LIBS)
1838
2067
1839fix-header.o: fix-header.c obstack.h scan.h xsys-protos.h $(build_xm_file)
2068fix-header.o: fix-header.c obstack.h scan.h xsys-protos.h $(build_xm_file) \
2069 system.h cpplib.h cpphash.h
1840 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/fix-header.c
1841
2070 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/fix-header.c
2071
1842scan-decls.o: scan-decls.c scan.h cpplib.h $(build_xm_file)
2072scan-decls.o: scan-decls.c scan.h cpplib.h $(build_xm_file) system.h gansidecl.h
1843 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/scan-decls.c
1844
1845# stmp-fixproto depends on this, not on fix-header directly.
1846# The idea is to make sure fix-header gets built,
1847# but not rerun fixproto after each stage
1848# just because fix-header's mtime has changed.
1849fixhdr.ready: fix-header
1850 -if [ -f fixhdr.ready ] ; then \

--- 7 unchanged lines hidden (view full) ---

1858# if it has already been run on the files in `include'.
1859stmp-fixproto: fixhdr.ready fixproto stmp-headers
1860 @echo "Various warnings and error messages from fixproto are normal"
1861 -if [ -d include ] ; then true; else mkdir include; fi
1862 -if [ -f include/fixed ] ; then true; \
1863 else \
1864 : This line works around a 'make' bug in BSDI 1.1.; \
1865 FIXPROTO_DEFINES="$(FIXPROTO_DEFINES)"; export FIXPROTO_DEFINES; \
2073 $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/scan-decls.c
2074
2075# stmp-fixproto depends on this, not on fix-header directly.
2076# The idea is to make sure fix-header gets built,
2077# but not rerun fixproto after each stage
2078# just because fix-header's mtime has changed.
2079fixhdr.ready: fix-header
2080 -if [ -f fixhdr.ready ] ; then \

--- 7 unchanged lines hidden (view full) ---

2088# if it has already been run on the files in `include'.
2089stmp-fixproto: fixhdr.ready fixproto stmp-headers
2090 @echo "Various warnings and error messages from fixproto are normal"
2091 -if [ -d include ] ; then true; else mkdir include; fi
2092 -if [ -f include/fixed ] ; then true; \
2093 else \
2094 : This line works around a 'make' bug in BSDI 1.1.; \
2095 FIXPROTO_DEFINES="$(FIXPROTO_DEFINES)"; export FIXPROTO_DEFINES; \
1866 $(SHELL) ${srcdir}/fixproto include include $(SYSTEM_HEADER_DIR); \
2096 if [ -d $(SYSTEM_HEADER_DIR) ] ; then \
2097 $(SHELL) ${srcdir}/fixproto include include $(SYSTEM_HEADER_DIR); \
2098 else true; fi; \
1867 touch include/fixed; \
1868 fi
1869 touch stmp-fixproto
2099 touch include/fixed; \
2100 fi
2101 touch stmp-fixproto
1870
2102#
1871# Remake the info files.
1872
1873doc: info
2103# Remake the info files.
2104
2105doc: info
1874info: $(srcdir)/cpp.info $(srcdir)/gcc.info lang.info
2106info: cpp.info gcc.info lang.info
1875
2107
1876$(srcdir)/cpp.info: cpp.texi
1877 cd $(srcdir); $(MAKEINFO) cpp.texi
2108cpp.info: $(srcdir)/cpp.texi
2109 $(MAKEINFO) $(MAKEINFOFLAGS) -I$(srcdir) -o cpp.info $(srcdir)/cpp.texi
1878
2110
1879$(srcdir)/gcc.info: gcc.texi extend.texi install.texi invoke.texi \
1880 md.texi rtl.texi tm.texi
1881 cd $(srcdir); $(MAKEINFO) gcc.texi
2111gcc.info: $(srcdir)/gcc.texi $(srcdir)/extend.texi $(srcdir)/install.texi \
2112 $(srcdir)/invoke.texi $(srcdir)/md.texi $(srcdir)/rtl.texi \
2113 $(srcdir)/tm.texi $(srcdir)/gcov.texi
2114 $(MAKEINFO) $(MAKEINFOFLAGS) -I$(srcdir) -o gcc.info $(srcdir)/gcc.texi
1882
2115
1883dvi: $(srcdir)/gcc.dvi $(srcdir)/cpp.dvi lang.dvi
2116dvi: gcc.dvi cpp.dvi lang.dvi
1884
1885# This works with GNU Make's default rule.
2117
2118# This works with GNU Make's default rule.
1886$(srcdir)/gcc.dvi: gcc.texi extend.texi install.texi invoke.texi \
1887 md.texi rtl.texi tm.texi
1888 $(TEXI2DVI) $<
2119gcc.dvi: $(srcdir)/gcc.texi $(srcdir)/extend.texi $(srcdir)/install.texi \
2120 $(srcdir)/invoke.texi $(srcdir)/md.texi $(srcdir)/rtl.texi \
2121 $(srcdir)/tm.texi $(srcdir)/gcov.texi
2122 TEXINPUTS=${texidir}:$(srcdir):$$TEXINPUTS tex gcc.texi
2123 texindex gcc.??
2124 TEXINPUTS=${texidir}:$(srcdir):$$TEXINPUTS tex gcc.texi
1889
2125
1890# This works with GNU Make's default rule.
1891$(srcdir)/cpp.dvi: cpp.texi
1892 $(TEXI2DVI) $<
2126cpp.dvi: $(srcdir)/cpp.texi
2127 TEXINPUTS=${texidir}:$(srcdir):$$TEXINPUTS tex cpp.texi
2128 texindex cpp.??
2129 TEXINPUTS=${texidir}:$(srcdir):$$TEXINPUTS tex cpp.texi
1893
2130
1894$(srcdir)/INSTALL: install1.texi install.texi
1895 $(MAKEINFO) -D INSTALLONLY --no-header --no-split \
1896 `echo $(srcdir)/install1.texi | sed 's,^\./,,'`
1897
2131
2132INSTALL: $(srcdir)/install1.texi $(srcdir)/install.texi
2133 cd $(srcdir); $(MAKEINFO) -D INSTALLONLY --no-header \
2134 --no-split -o INSTALL install1.texi
2135#
1898# Deletion of files made during compilation.
1899# There are four levels of this:
1900# `mostlyclean', `clean', `distclean' and `maintainer-clean'.
1901# `mostlyclean' is useful while working on a particular type of machine.
1902# It deletes most, but not all, of the files made by compilation.
1903# It does not delete libgcc.a or its parts, so it won't have to be recompiled.
1904# `clean' deletes everything made by running `make all'.
1905# `distclean' also deletes the files made by config.
1906# `maintainer-clean' also deletes everything that could be regenerated
2136# Deletion of files made during compilation.
2137# There are four levels of this:
2138# `mostlyclean', `clean', `distclean' and `maintainer-clean'.
2139# `mostlyclean' is useful while working on a particular type of machine.
2140# It deletes most, but not all, of the files made by compilation.
2141# It does not delete libgcc.a or its parts, so it won't have to be recompiled.
2142# `clean' deletes everything made by running `make all'.
2143# `distclean' also deletes the files made by config.
2144# `maintainer-clean' also deletes everything that could be regenerated
1907# automatically. We remove as much from the language subdirectories as we can
2145# automatically, except for `configure'.
2146# We remove as much from the language subdirectories as we can
1908# (less duplicated code).
1909
1910
2147# (less duplicated code).
2148
2149
1911mostlyclean: bytecode.mostlyclean lang.mostlyclean
2150mostlyclean: lang.mostlyclean
1912 -rm -f $(STAGESTUFF)
2151 -rm -f $(STAGESTUFF)
1913# Clean the objc subdir if we created one.
1914 if [ -d objc ]; then \
1915 srcdir1=`cd $(srcdir); pwd`; \
1916 cd objc; $(MAKE) -f $$srcdir1/objc/Makefile mostlyclean; \
1917 else true; fi
1918 -rm -f libobjc.a
1919# Delete the temporary source copies for cross compilation.
1920 -rm -f $(HOST_PREFIX_1)rtl.c $(HOST_PREFIX_1)rtlanal.c
1921 -rm -f $(HOST_PREFIX_1)alloca.c $(HOST_PREFIX_1)malloc.c
1922 -rm -f $(HOST_PREFIX_1)obstack.c
1923# Delete the temp files made in the course of building libgcc.a.
2152# Delete the temporary source copies for cross compilation.
2153 -rm -f $(HOST_PREFIX_1)rtl.c $(HOST_PREFIX_1)rtlanal.c
2154 -rm -f $(HOST_PREFIX_1)alloca.c $(HOST_PREFIX_1)malloc.c
2155 -rm -f $(HOST_PREFIX_1)obstack.c
2156# Delete the temp files made in the course of building libgcc.a.
1924 -rm -f tmplibgcc* tmpcopy xlimits.h
2157 -rm -f tmplibgcc* tmpcopy xlimits.h libgcc1-test
1925 for name in $(LIB1FUNCS); do rm -f $${name}.c; done
2158 for name in $(LIB1FUNCS); do rm -f $${name}.c; done
1926# Delete other temporary files.
1927 -rm -f tmp-float.h tmp-gcc.xtar.gz
1928 -rm -f tmp-foo1 tmp-foo2 tmp-proto.* tmp-unproto.1 tmp-SYSCALLS.s
1929 -rm -f tmp-c-parse.y tmp-objc-prs.y tmp-gperf.h
1930 -rm -f tmp-specs t-float.h-cross tmp-xlimits.h
1931 -rm -f tmp-fixtmp.c xsys-protos.hT
1932# Delete the stamp files.
1933 -rm -f stamp-* tmp-*
2159# Delete other built files.
2160 -rm -f t-float.h-cross xsys-protos.hT fp-bit.c dp-bit.c
2161# Delete the stamp and temporary files.
2162 -rm -f s-* tmp-* stamp-* stmp-*
1934 -rm -f */stamp-* */tmp-*
1935# Delete debugging dump files.
1936 -rm -f *.greg *.lreg *.combine *.flow *.cse *.jump *.rtl *.tree *.loop
2163 -rm -f */stamp-* */tmp-*
2164# Delete debugging dump files.
2165 -rm -f *.greg *.lreg *.combine *.flow *.cse *.jump *.rtl *.tree *.loop
1937 -rm -f *.dbr *.jump2 *.sched *.cse2 *.sched2 *.stack
2166 -rm -f *.dbr *.jump2 *.sched *.cse2 *.sched2 *.stack *.addressof
2167 -rm -f *.regmove *.mach *.bp *.gcse
1938 -rm -f */*.greg */*.lreg */*.combine */*.flow */*.cse */*.jump */*.rtl
1939 -rm -f */*.tree */*.loop */*.dbr */*.jump2 */*.sched */*.cse2
2168 -rm -f */*.greg */*.lreg */*.combine */*.flow */*.cse */*.jump */*.rtl
2169 -rm -f */*.tree */*.loop */*.dbr */*.jump2 */*.sched */*.cse2
1940 -rm -f */*.sched2 */*.stack
2170 -rm -f */*.sched2 */*.stack */*.regmove */*.gcse
1941# Delete some files made during installation.
1942 -rm -f specs gfloat.h float.h-* enquire SYSCALLS.c.X SYSCALLS.c
1943 -rm -f collect collect2 mips-tfile mips-tdump alloca.s
1944# Delete files generated for fixproto
1945 -rm -rf fix-header xsys-protos.h deduced.h tmp-deduced.h \
1946 gen-protos fixproto.list fixtmp.* fixhdr.ready
1947# Delete unwanted output files from TeX.
1948 -rm -f *.toc *.log *.vr *.fn *.cp *.tp *.ky *.pg
1949 -rm -f */*.toc */*.log */*.vr */*.fn */*.cp */*.tp */*.ky */*.pg
1950# Delete sorted indices we don't actually use.
1951 -rm -f gcc.vrs gcc.kys gcc.tps gcc.pgs gcc.fns
1952# Delete core dumps.
1953 -rm -f core */core
2171# Delete some files made during installation.
2172 -rm -f specs gfloat.h float.h-* enquire SYSCALLS.c.X SYSCALLS.c
2173 -rm -f collect collect2 mips-tfile mips-tdump alloca.s
2174# Delete files generated for fixproto
2175 -rm -rf fix-header xsys-protos.h deduced.h tmp-deduced.h \
2176 gen-protos fixproto.list fixtmp.* fixhdr.ready
2177# Delete unwanted output files from TeX.
2178 -rm -f *.toc *.log *.vr *.fn *.cp *.tp *.ky *.pg
2179 -rm -f */*.toc */*.log */*.vr */*.fn */*.cp */*.tp */*.ky */*.pg
2180# Delete sorted indices we don't actually use.
2181 -rm -f gcc.vrs gcc.kys gcc.tps gcc.pgs gcc.fns
2182# Delete core dumps.
2183 -rm -f core */core
2184 -rm -f *.bp */*.bp
1954
1955# Delete all files made by compilation
1956# that don't exist in the distribution.
2185
2186# Delete all files made by compilation
2187# that don't exist in the distribution.
1957clean: mostlyclean bytecode.clean lang.clean
2188clean: mostlyclean lang.clean
1958# It may not be quite desirable to delete unprotoize.c here,
1959# but the spec for `make clean' requires it.
1960# Using unprotoize.c is not quite right in the first place,
1961# but what better way is there?
1962 -rm -f libgcc.a libgcc1.a libgcc1-asm.a libgcc2.a libgcc2.ready
1963 -rm -f libgcc1.null
1964 -rm -f *.dvi
1965 -rm -f */*.dvi
1966 -if [ -f md.pre-cpp ]; then \
1967 rm -f md ; \
1968 fi
1969# Delete the include directory.
2189# It may not be quite desirable to delete unprotoize.c here,
2190# but the spec for `make clean' requires it.
2191# Using unprotoize.c is not quite right in the first place,
2192# but what better way is there?
2193 -rm -f libgcc.a libgcc1.a libgcc1-asm.a libgcc2.a libgcc2.ready
2194 -rm -f libgcc1.null
2195 -rm -f *.dvi
2196 -rm -f */*.dvi
2197 -if [ -f md.pre-cpp ]; then \
2198 rm -f md ; \
2199 fi
2200# Delete the include directory.
1970 -rm -rf stmp-* include objc-headers
1971 -rm -f */stmp-*
2201 -rm -rf include
1972# Delete files used by the "multilib" facility (including libgcc subdirs).
1973 -rm -f multilib.h tmpmultilib*
1974 -if [ "x$(MULTILIB_DIRNAMES)" != x ] ; then \
1975 rm -rf $(MULTILIB_DIRNAMES); \
1976 else if [ "x$(MULTILIB_OPTIONS)" != x ] ; then \
1977 rm -rf `echo $(MULTILIB_OPTIONS) | sed -e 's/\// /g'`; \
1978 fi ; fi
2202# Delete files used by the "multilib" facility (including libgcc subdirs).
2203 -rm -f multilib.h tmpmultilib*
2204 -if [ "x$(MULTILIB_DIRNAMES)" != x ] ; then \
2205 rm -rf $(MULTILIB_DIRNAMES); \
2206 else if [ "x$(MULTILIB_OPTIONS)" != x ] ; then \
2207 rm -rf `echo $(MULTILIB_OPTIONS) | sed -e 's/\// /g'`; \
2208 fi ; fi
2209 -rm -fr stage1 stage2 stage3 stage4
1979
1980# Delete all files that users would normally create
1981# while building and installing GCC.
2210
2211# Delete all files that users would normally create
2212# while building and installing GCC.
1982distclean: clean bytecode.distclean lang.distclean
1983 -rm -f tm.h config.h tconfig.h hconfig.h md
1984 -rm -f config.status config.run
2213distclean: clean lang.distclean
2214 -rm -f tm.h config.h auto-host.h auto-build.h tconfig.h hconfig.h
2215 -rm -f md cstamp-h
2216 -rm -f config.status config.run config.cache config.bak
2217 -rm -f Make-lang Make-hooks Make-host Make-target
1985 -rm -f Makefile specs.h options.h *.oaux
2218 -rm -f Makefile specs.h options.h *.oaux
1986 -rm -fr stage1 stage2 stage3 stage4
2219 -rm -f gthr-default.h
1987 -rm -f */stage1 */stage2 */stage3 */stage4 */include
2220 -rm -f */stage1 */stage2 */stage3 */stage4 */include
1988 -rm -f objc-parse.output
1989 -rm -f c-parse.output
1990 -rm -f *.asm
2221 -rm -f c-parse.output
2222 -rm -f *.asm
2223 -rm -f float.h
2224 -rm -f site.exp site.bak testsuite/site.exp testsuite/site.bak
2225 -rm -f testsuite/{gcc,g++}.{log,sum}
1991
1992# Delete anything likely to be found in the source directory
1993# that shouldn't be in the distribution.
1994extraclean: distclean lang.extraclean
1995 -rm -rf =* ./"#"* *~* config/=* config/"#"* config/*~*
1996 -rm -f patch* *.orig *.rej config/patch* config/*.orig config/*.rej
1997 -rm -f config/*/=* config/*/"#"* config/*/*~*
1998 -rm -f config/*/*.orig config/*/*.rej
1999 -rm -f *.dvi *.ps *.oaux *.d *.[zZ] *.gz
2000 -rm -f *.tar *.xtar *diff *.diff.* *.tar.* *.xtar.* *diffs
2001 -rm -f *lose config/*lose config/*/*lose
2226
2227# Delete anything likely to be found in the source directory
2228# that shouldn't be in the distribution.
2229extraclean: distclean lang.extraclean
2230 -rm -rf =* ./"#"* *~* config/=* config/"#"* config/*~*
2231 -rm -f patch* *.orig *.rej config/patch* config/*.orig config/*.rej
2232 -rm -f config/*/=* config/*/"#"* config/*/*~*
2233 -rm -f config/*/*.orig config/*/*.rej
2234 -rm -f *.dvi *.ps *.oaux *.d *.[zZ] *.gz
2235 -rm -f *.tar *.xtar *diff *.diff.* *.tar.* *.xtar.* *diffs
2236 -rm -f *lose config/*lose config/*/*lose
2002 -rm -f *.s *.s[0-9] *.i install1.texi config/ChangeLog
2237 -rm -f *.s *.s[0-9] *.i config/ChangeLog
2003 -rm -f */=* */"#"* */*~*
2004 -rm -f */patch* */*.orig */*.rej
2005 -rm -f */*.dvi */*.oaux */*.d */*.[zZ] */*.gz
2006 -rm -f */*.tar */*.xtar */*diff */*.diff.* */*.tar.* */*.xtar.* */*diffs
2007 -rm -f */*lose */*.s */*.s[0-9] */*.i
2008
2238 -rm -f */=* */"#"* */*~*
2239 -rm -f */patch* */*.orig */*.rej
2240 -rm -f */*.dvi */*.oaux */*.d */*.[zZ] */*.gz
2241 -rm -f */*.tar */*.xtar */*diff */*.diff.* */*.tar.* */*.xtar.* */*diffs
2242 -rm -f */*lose */*.s */*.s[0-9] */*.i
2243
2009# Get rid of every file that's generated from some other file.
2244# Get rid of every file that's generated from some other file, except for `configure'.
2010# Most of these files ARE PRESENT in the GCC distribution.
2245# Most of these files ARE PRESENT in the GCC distribution.
2011maintainer-clean: distclean bytecode.maintainer-clean lang.maintainer-clean
2012 -rm -f c-parse.y c-gperf.h objc-parse.y
2013 -rm -f objc-parse.c objc-parse.output
2246maintainer-clean:
2247 @echo 'This command is intended for maintainers to use; it'
2248 @echo 'deletes files that may need special tools to rebuild.'
2249 $(MAKE) distclean lang.maintainer-clean
2250 -rm -f c-parse.y c-gperf.h
2014 -rm -f c-parse.c c-parse.h c-parse.output
2015 -rm -f cexp.c cexp.output TAGS
2016 -rm -f cpp.info* cpp.??s cpp.*aux
2017 -rm -f gcc.info* gcc.??s gcc.*aux
2251 -rm -f c-parse.c c-parse.h c-parse.output
2252 -rm -f cexp.c cexp.output TAGS
2253 -rm -f cpp.info* cpp.??s cpp.*aux
2254 -rm -f gcc.info* gcc.??s gcc.*aux
2018
2255#
2019# Entry points `install' and `uninstall'.
2020# Also use `install-collect2' to install collect2 when the config files don't.
2021
2022# The semicolon is to prevent the install.sh -> install default rule
2023# from doing anything. Having it run true helps avoid problems and
2024# noise from versions of make which don't like to have null commands.
2025install: $(INSTALL_TARGET) ; @true
2026
2027# Copy the compiler files into directories where they will be run.
2028# Install the driver last so that the window when things are
2029# broken is small.
2030install-normal: install-common $(INSTALL_HEADERS) $(INSTALL_LIBGCC) \
2256# Entry points `install' and `uninstall'.
2257# Also use `install-collect2' to install collect2 when the config files don't.
2258
2259# The semicolon is to prevent the install.sh -> install default rule
2260# from doing anything. Having it run true helps avoid problems and
2261# noise from versions of make which don't like to have null commands.
2262install: $(INSTALL_TARGET) ; @true
2263
2264# Copy the compiler files into directories where they will be run.
2265# Install the driver last so that the window when things are
2266# broken is small.
2267install-normal: install-common $(INSTALL_HEADERS) $(INSTALL_LIBGCC) \
2031 install-libobjc install-man install-info lang.install-normal install-driver
2268 $(INSTALL_CPP) install-man install-info lang.install-normal \
2269 install-driver
2032
2033# Do nothing while making gcc with a cross-compiler. The person who
2034# makes gcc for the target machine has to know how to put a complete
2035# gcc together by hand.
2036install-build: force
2037 @echo You have to install gcc on your target machine by hand.
2038
2039# Run this on the target machine
2040# to finish installation of cross compiler.
2041install-cross-rest: install-float-h-cross
2042
2270
2271# Do nothing while making gcc with a cross-compiler. The person who
2272# makes gcc for the target machine has to know how to put a complete
2273# gcc together by hand.
2274install-build: force
2275 @echo You have to install gcc on your target machine by hand.
2276
2277# Run this on the target machine
2278# to finish installation of cross compiler.
2279install-cross-rest: install-float-h-cross
2280
2281# Handle cpp installation.
2282install-cpp: cpp.sh
2283 -rm -f $(bindir)/cpp
2284 $(INSTALL_PROGRAM) -m 755 cpp.sh $(bindir)/cpp
2285 if [ x$(cpp_install_dir) != x ]; then \
2286 rm -f $(cpp_install_dir)/cpp; \
2287 $(INSTALL_PROGRAM) -m 755 cpp.sh $(cpp_install_dir)/cpp; \
2288 else true; fi
2289
2290cpp.sh: $(srcdir)/cpp.in Makefile
2291 sed -e 's%@GCC@%'$(GCC_INSTALL_NAME)'%' $(srcdir)/cpp.in > xcpp.T
2292 mv -f xcpp.T cpp.sh
2293
2294uninstall-cpp:
2295 -rm -f $(bindir)/cpp
2296 -if [ x$(cpp_install_dir) != x ]; then \
2297 rm -f $(cpp_install_dir)/cpp; \
2298 else true; fi
2299
2043# Install float.h for cross compiler.
2044# Run this on the target machine!
2300# Install float.h for cross compiler.
2301# Run this on the target machine!
2045install-float-h-cross: install-dir
2302install-float-h-cross: installdirs
2046# if [ -f enquire ] ; then true; else false; fi
2047# Note: don't use -. We should fail right away if enquire was not made.
2048 ./enquire -f > $(tmpdir)/float.h
2049 -rm -f $(libsubdir)/include/float.h
2050 $(INSTALL_DATA) $(tmpdir)/float.h $(libsubdir)/include/float.h
2051 -rm -f $(tmpdir)/float.h
2052 chmod a-x $(libsubdir)/include/float.h
2053
2303# if [ -f enquire ] ; then true; else false; fi
2304# Note: don't use -. We should fail right away if enquire was not made.
2305 ./enquire -f > $(tmpdir)/float.h
2306 -rm -f $(libsubdir)/include/float.h
2307 $(INSTALL_DATA) $(tmpdir)/float.h $(libsubdir)/include/float.h
2308 -rm -f $(tmpdir)/float.h
2309 chmod a-x $(libsubdir)/include/float.h
2310
2054# Create the installation directory.
2055install-dir:
2311# Create the installation directories.
2312installdirs:
2313 -if [ -d $(prefix) ] ; then true ; else mkdir $(prefix) ; chmod a+rx $(prefix) ; fi
2314 -if [ -d $(exec_prefix) ] ; then true ; else mkdir $(exec_prefix) ; chmod a+rx $(exec_prefix) ; fi
2056 -if [ -d $(libdir) ] ; then true ; else mkdir $(libdir) ; chmod a+rx $(libdir) ; fi
2057 -if [ -d $(libdir)/gcc-lib ] ; then true ; else mkdir $(libdir)/gcc-lib ; chmod a+rx $(libdir)/gcc-lib ; fi
2058# This dir isn't currently searched by cpp.
2059# -if [ -d $(libdir)/gcc-lib/include ] ; then true ; else mkdir $(libdir)/gcc-lib/include ; chmod a+rx $(libdir)/gcc-lib/include ; fi
2315 -if [ -d $(libdir) ] ; then true ; else mkdir $(libdir) ; chmod a+rx $(libdir) ; fi
2316 -if [ -d $(libdir)/gcc-lib ] ; then true ; else mkdir $(libdir)/gcc-lib ; chmod a+rx $(libdir)/gcc-lib ; fi
2317# This dir isn't currently searched by cpp.
2318# -if [ -d $(libdir)/gcc-lib/include ] ; then true ; else mkdir $(libdir)/gcc-lib/include ; chmod a+rx $(libdir)/gcc-lib/include ; fi
2060 -if [ -d $(libdir)/gcc-lib/$(target) ] ; then true ; else mkdir $(libdir)/gcc-lib/$(target) ; chmod a+rx $(libdir)/gcc-lib/$(target) ; fi
2061 -if [ -d $(libdir)/gcc-lib/$(target)/$(version) ] ; then true ; else mkdir $(libdir)/gcc-lib/$(target)/$(version) ; chmod a+rx $(libdir)/gcc-lib/$(target)/$(version) ; fi
2062 -if [ -d $(libdir)/gcc-lib/$(target)/$(version)/include ] ; then true ; else mkdir $(libdir)/gcc-lib/$(target)/$(version)/include ; chmod a+rx $(libdir)/gcc-lib/$(target)/$(version)/include ; fi
2319 -fdir= ; for dir in `echo $(libsubdir) | tr '/' ' '`; do \
2320 fdir=$${fdir}/$${dir}; \
2321 if [ -d $${fdir} ] ; then true ; else mkdir $${fdir}; chmod a+rx $${fdir}; fi ; \
2322 done
2063 -if [ -d $(bindir) ] ; then true ; else mkdir $(bindir) ; chmod a+rx $(bindir) ; fi
2064 -if [ -d $(includedir) ] ; then true ; else mkdir $(includedir) ; chmod a+rx $(includedir) ; fi
2065 -if [ -d $(tooldir) ] ; then true ; else mkdir $(tooldir) ; chmod a+rx $(tooldir) ; fi
2066 -if [ -d $(assertdir) ] ; then true ; else mkdir $(assertdir) ; chmod a+rx $(assertdir) ; fi
2067 -if [ -d $(infodir) ] ; then true ; else mkdir $(infodir) ; chmod a+rx $(infodir) ; fi
2068# We don't use mkdir -p to create the parents of mandir,
2069# because some systems don't support it.
2070# Instead, we use this technique to create the immediate parent of mandir.
2071 -parent=`echo $(mandir)|sed -e 's@/[^/]*$$@@'`; \
2072 if [ -d $$parent ] ; then true ; else mkdir $$parent ; chmod a+rx $$parent ; fi
2073 -if [ -d $(mandir) ] ; then true ; else mkdir $(mandir) ; chmod a+rx $(mandir) ; fi
2074
2075# Install the compiler executables built during cross compilation.
2323 -if [ -d $(bindir) ] ; then true ; else mkdir $(bindir) ; chmod a+rx $(bindir) ; fi
2324 -if [ -d $(includedir) ] ; then true ; else mkdir $(includedir) ; chmod a+rx $(includedir) ; fi
2325 -if [ -d $(tooldir) ] ; then true ; else mkdir $(tooldir) ; chmod a+rx $(tooldir) ; fi
2326 -if [ -d $(assertdir) ] ; then true ; else mkdir $(assertdir) ; chmod a+rx $(assertdir) ; fi
2327 -if [ -d $(infodir) ] ; then true ; else mkdir $(infodir) ; chmod a+rx $(infodir) ; fi
2328# We don't use mkdir -p to create the parents of mandir,
2329# because some systems don't support it.
2330# Instead, we use this technique to create the immediate parent of mandir.
2331 -parent=`echo $(mandir)|sed -e 's@/[^/]*$$@@'`; \
2332 if [ -d $$parent ] ; then true ; else mkdir $$parent ; chmod a+rx $$parent ; fi
2333 -if [ -d $(mandir) ] ; then true ; else mkdir $(mandir) ; chmod a+rx $(mandir) ; fi
2334
2335# Install the compiler executables built during cross compilation.
2076install-common: native install-dir $(EXTRA_PARTS) lang.install-common
2336install-common: native installdirs $(EXTRA_PARTS) lang.install-common
2077 for file in $(COMPILERS); do \
2078 if [ -f $$file ] ; then \
2079 rm -f $(libsubdir)/$$file; \
2080 $(INSTALL_PROGRAM) $$file $(libsubdir)/$$file; \
2081 else true; \
2082 fi; \
2083 done
2084 for file in $(EXTRA_PASSES) $(EXTRA_PROGRAMS) $(USE_COLLECT2) ..; do \
2085 if [ x"$$file" != x.. ]; then \
2086 rm -f $(libsubdir)/$$file; \
2087 $(INSTALL_PROGRAM) $$file $(libsubdir)/$$file; \
2088 else true; fi; \
2089 done
2090 for file in $(EXTRA_PARTS) ..; do \
2091 if [ x"$$file" != x.. ]; then \
2092 rm -f $(libsubdir)/$$file; \
2093 $(INSTALL_DATA) $$file $(libsubdir)/$$file; \
2337 for file in $(COMPILERS); do \
2338 if [ -f $$file ] ; then \
2339 rm -f $(libsubdir)/$$file; \
2340 $(INSTALL_PROGRAM) $$file $(libsubdir)/$$file; \
2341 else true; \
2342 fi; \
2343 done
2344 for file in $(EXTRA_PASSES) $(EXTRA_PROGRAMS) $(USE_COLLECT2) ..; do \
2345 if [ x"$$file" != x.. ]; then \
2346 rm -f $(libsubdir)/$$file; \
2347 $(INSTALL_PROGRAM) $$file $(libsubdir)/$$file; \
2348 else true; fi; \
2349 done
2350 for file in $(EXTRA_PARTS) ..; do \
2351 if [ x"$$file" != x.. ]; then \
2352 rm -f $(libsubdir)/$$file; \
2353 $(INSTALL_DATA) $$file $(libsubdir)/$$file; \
2354 chmod a-x $(libsubdir)/$$file; \
2094 else true; fi; \
2095 done
2096# Don't mess with specs if it doesn't exist yet.
2097 -if [ -f specs ] ; then \
2098 rm -f $(libsubdir)/specs; \
2099 $(INSTALL_DATA) specs $(libsubdir)/specs; \
2355 else true; fi; \
2356 done
2357# Don't mess with specs if it doesn't exist yet.
2358 -if [ -f specs ] ; then \
2359 rm -f $(libsubdir)/specs; \
2360 $(INSTALL_DATA) specs $(libsubdir)/specs; \
2361 chmod a-x $(libsubdir)/specs; \
2100 fi
2101# Install protoize if it was compiled.
2102 -if [ -f protoize$(exeext) ]; \
2103 then \
2362 fi
2363# Install protoize if it was compiled.
2364 -if [ -f protoize$(exeext) ]; \
2365 then \
2104 rm -f $(bindir)/protoize$(exeext); \
2105 $(INSTALL_PROGRAM) protoize$(exeext) $(bindir)/protoize$(exeext); \
2106 rm -f $(bindir)/unprotoize$(exeext); \
2107 $(INSTALL_PROGRAM) unprotoize$(exeext) $(bindir)/unprotoize$(exeext); \
2366 if [ -f gcc-cross$(exeext) ] ; then \
2367 rm -f $(bindir)/$(PROTOIZE_CROSS_NAME)$(exeext); \
2368 $(INSTALL_PROGRAM) protoize$(exeext) $(bindir)/$(PROTOIZE_CROSS_NAME)$(exeext); \
2369 rm -f $(bindir)/$(UNPROTOIZE_CROSS_NAME)$(exeext); \
2370 $(INSTALL_PROGRAM) unprotoize$(exeext) $(bindir)/$(UNPROTOIZE_CROSS_NAME)$(exeext); \
2371 else \
2372 rm -f $(bindir)/$(PROTOIZE_INSTALL_NAME)$(exeext); \
2373 $(INSTALL_PROGRAM) protoize$(exeext) $(bindir)/$(PROTOIZE_INSTALL_NAME)$(exeext); \
2374 rm -f $(bindir)/$(UNPROTOIZE_INSTALL_NAME)$(exeext); \
2375 $(INSTALL_PROGRAM) unprotoize$(exeext) $(bindir)/$(UNPROTOIZE_INSTALL_NAME)$(exeext); \
2376 fi ; \
2108 rm -f $(libsubdir)/SYSCALLS.c.X; \
2109 $(INSTALL_DATA) SYSCALLS.c.X $(libsubdir)/SYSCALLS.c.X; \
2110 chmod a-x $(libsubdir)/SYSCALLS.c.X; \
2111 fi
2112 -rm -f $(libsubdir)/cpp$(exeext)
2113 $(INSTALL_PROGRAM) cpp$(exeext) $(libsubdir)/cpp$(exeext)
2377 rm -f $(libsubdir)/SYSCALLS.c.X; \
2378 $(INSTALL_DATA) SYSCALLS.c.X $(libsubdir)/SYSCALLS.c.X; \
2379 chmod a-x $(libsubdir)/SYSCALLS.c.X; \
2380 fi
2381 -rm -f $(libsubdir)/cpp$(exeext)
2382 $(INSTALL_PROGRAM) cpp$(exeext) $(libsubdir)/cpp$(exeext)
2383# Install gcov if it was compiled.
2384 -if [ -f gcov$(exeext) ]; \
2385 then \
2386 rm -f $(bindir)/gcov$(exeext); \
2387 $(INSTALL_PROGRAM) gcov$(exeext) $(bindir)/gcov$(exeext); \
2388 chmod a+x $(bindir)/gcov$(exeext); \
2389 fi
2114
2390
2115# Install the driver program as $(target)-gcc
2391# Install the driver program as $(target_alias)-gcc
2116# and also as either gcc (if native) or $(tooldir)/bin/gcc.
2392# and also as either gcc (if native) or $(tooldir)/bin/gcc.
2117install-driver: xgcc
2393install-driver: xgcc$(exeext)
2118 -if [ -f gcc-cross$(exeext) ] ; then \
2119 rm -f $(bindir)/$(GCC_CROSS_NAME)$(exeext); \
2120 $(INSTALL_PROGRAM) gcc-cross$(exeext) $(bindir)/$(GCC_CROSS_NAME)$(exeext); \
2121 if [ -d $(tooldir)/bin/. ] ; then \
2122 rm -f $(tooldir)/bin/gcc$(exeext); \
2123 $(INSTALL_PROGRAM) gcc-cross$(exeext) $(tooldir)/bin/gcc$(exeext); \
2124 else true; fi; \
2125 else \
2126 rm -f $(bindir)/$(GCC_INSTALL_NAME)$(exeext); \
2127 $(INSTALL_PROGRAM) xgcc$(exeext) $(bindir)/$(GCC_INSTALL_NAME)$(exeext); \
2394 -if [ -f gcc-cross$(exeext) ] ; then \
2395 rm -f $(bindir)/$(GCC_CROSS_NAME)$(exeext); \
2396 $(INSTALL_PROGRAM) gcc-cross$(exeext) $(bindir)/$(GCC_CROSS_NAME)$(exeext); \
2397 if [ -d $(tooldir)/bin/. ] ; then \
2398 rm -f $(tooldir)/bin/gcc$(exeext); \
2399 $(INSTALL_PROGRAM) gcc-cross$(exeext) $(tooldir)/bin/gcc$(exeext); \
2400 else true; fi; \
2401 else \
2402 rm -f $(bindir)/$(GCC_INSTALL_NAME)$(exeext); \
2403 $(INSTALL_PROGRAM) xgcc$(exeext) $(bindir)/$(GCC_INSTALL_NAME)$(exeext); \
2128 rm -f $(bindir)/$(target)-gcc-1$(exeext); \
2129 ln $(bindir)/$(GCC_INSTALL_NAME)$(exeext) $(bindir)/$(target)-gcc-1$(exeext) \
2130 > /dev/null 2>&1 \
2131 || cp $(bindir)/$(GCC_INSTALL_NAME)$(exeext) $(bindir)/$(target)-gcc-1$(exeext); \
2132 mv $(bindir)/$(target)-gcc-1$(exeext) $(bindir)/$(target)-gcc$(exeext); \
2404 rm -f $(bindir)/$(target_alias)-gcc-1$(exeext); \
2405 $(LN) $(bindir)/$(GCC_INSTALL_NAME)$(exeext) $(bindir)/$(target_alias)-gcc-1$(exeext); \
2406 mv $(bindir)/$(target_alias)-gcc-1$(exeext) $(bindir)/$(target_alias)-gcc$(exeext); \
2133 fi
2134
2135# Install the info files.
2407 fi
2408
2409# Install the info files.
2136install-info: doc install-dir lang.install-info
2410# $(INSTALL_DATA) might be a relative pathname, so we can't cd into srcdir
2411# to do the install.
2412install-info: doc installdirs lang.install-info
2137 -rm -f $(infodir)/cpp.info* $(infodir)/gcc.info*
2413 -rm -f $(infodir)/cpp.info* $(infodir)/gcc.info*
2138 cd $(srcdir); for f in cpp.info* gcc.info*; \
2139 do $(INSTALL_DATA) $$f $(infodir)/$$f; done
2414 for f in cpp.info* gcc.info*; do \
2415 $(INSTALL_DATA) $$f $(infodir)/$$f; \
2416 done
2417 -if $(SHELL) -c 'install-info --version' >/dev/null 2>&1; then \
2418 if [ -f $(infodir)/dir ] ; then \
2419 for f in cpp.info gcc.info; do \
2420 install-info --dir-file=$(infodir)/dir $(infodir)/$$f; \
2421 done; \
2422 else true; fi; \
2423 else true; fi;
2140 -chmod a-x $(infodir)/cpp.info* $(infodir)/gcc.info*
2141
2142# Install the man pages.
2424 -chmod a-x $(infodir)/cpp.info* $(infodir)/gcc.info*
2425
2426# Install the man pages.
2143install-man: install-dir $(srcdir)/gcc.1 $(srcdir)/cccp.1 lang.install-man
2144 -if [ -f gcc-cross ] ; then \
2427install-man: installdirs $(srcdir)/gcc.1 $(srcdir)/cccp.1 lang.install-man
2428 -if [ -f gcc-cross$(exeext) ] ; then \
2145 rm -f $(mandir)/$(GCC_CROSS_NAME)$(manext); \
2146 $(INSTALL_DATA) $(srcdir)/gcc.1 $(mandir)/$(GCC_CROSS_NAME)$(manext); \
2147 chmod a-x $(mandir)/$(GCC_CROSS_NAME)$(manext); \
2148 else \
2149 rm -f $(mandir)/$(GCC_INSTALL_NAME)$(manext); \
2150 $(INSTALL_DATA) $(srcdir)/gcc.1 $(mandir)/$(GCC_INSTALL_NAME)$(manext); \
2151 chmod a-x $(mandir)/$(GCC_INSTALL_NAME)$(manext); \
2152 fi
2153 -rm -f $(mandir)/cccp$(manext)
2154 -$(INSTALL_DATA) $(srcdir)/cccp.1 $(mandir)/cccp$(manext)
2155 -chmod a-x $(mandir)/cccp$(manext)
2156
2157# Install the library.
2429 rm -f $(mandir)/$(GCC_CROSS_NAME)$(manext); \
2430 $(INSTALL_DATA) $(srcdir)/gcc.1 $(mandir)/$(GCC_CROSS_NAME)$(manext); \
2431 chmod a-x $(mandir)/$(GCC_CROSS_NAME)$(manext); \
2432 else \
2433 rm -f $(mandir)/$(GCC_INSTALL_NAME)$(manext); \
2434 $(INSTALL_DATA) $(srcdir)/gcc.1 $(mandir)/$(GCC_INSTALL_NAME)$(manext); \
2435 chmod a-x $(mandir)/$(GCC_INSTALL_NAME)$(manext); \
2436 fi
2437 -rm -f $(mandir)/cccp$(manext)
2438 -$(INSTALL_DATA) $(srcdir)/cccp.1 $(mandir)/cccp$(manext)
2439 -chmod a-x $(mandir)/cccp$(manext)
2440
2441# Install the library.
2158install-libgcc: libgcc.a install-dir
2442install-libgcc: libgcc.a installdirs
2159 -if [ -f libgcc.a ] ; then \
2160 rm -f $(libsubdir)/libgcc.a; \
2161 $(INSTALL_DATA) libgcc.a $(libsubdir)/libgcc.a; \
2162 if $(RANLIB_TEST) ; then \
2163 (cd $(libsubdir); $(RANLIB) libgcc.a); else true; fi; \
2164 chmod a-x $(libsubdir)/libgcc.a; \
2165 else true; fi
2166
2167# Install multiple versions of libgcc.a.
2443 -if [ -f libgcc.a ] ; then \
2444 rm -f $(libsubdir)/libgcc.a; \
2445 $(INSTALL_DATA) libgcc.a $(libsubdir)/libgcc.a; \
2446 if $(RANLIB_TEST) ; then \
2447 (cd $(libsubdir); $(RANLIB) libgcc.a); else true; fi; \
2448 chmod a-x $(libsubdir)/libgcc.a; \
2449 else true; fi
2450
2451# Install multiple versions of libgcc.a.
2168install-multilib: stmp-multilib install-dir
2452install-multilib: stmp-multilib installdirs
2169 for i in `$(GCC_FOR_TARGET) --print-multi-lib`; do \
2170 dir=`echo $$i | sed -e 's/;.*$$//'`; \
2171 if [ -d $(libsubdir)/$${dir} ]; then true; else mkdir $(libsubdir)/$${dir}; fi; \
2453 for i in `$(GCC_FOR_TARGET) --print-multi-lib`; do \
2454 dir=`echo $$i | sed -e 's/;.*$$//'`; \
2455 if [ -d $(libsubdir)/$${dir} ]; then true; else mkdir $(libsubdir)/$${dir}; fi; \
2172 rm -f $(libsubdir)/$${dir}/libgcc.a; \
2173 $(INSTALL_DATA) $${dir}/libgcc.a $(libsubdir)/$${dir}/libgcc.a; \
2456 for f in libgcc.a $(EXTRA_MULTILIB_PARTS); do \
2457 rm -f $(libsubdir)/$${dir}/$${f}; \
2458 $(INSTALL_DATA) $${dir}/$${f} $(libsubdir)/$${dir}/$${f}; \
2459 done; \
2174 if $(RANLIB_TEST); then \
2175 (cd $(libsubdir)/$${dir}; $(RANLIB) libgcc.a); else true; fi; \
2176 chmod a-x $(libsubdir)/$${dir}/libgcc.a; \
2177 done
2178
2460 if $(RANLIB_TEST); then \
2461 (cd $(libsubdir)/$${dir}; $(RANLIB) libgcc.a); else true; fi; \
2462 chmod a-x $(libsubdir)/$${dir}/libgcc.a; \
2463 done
2464
2179# Install the objc run time library.
2180install-libobjc: install-dir
2181 -if [ -f libobjc.a ] ; then \
2182 rm -f $(libsubdir)/libobjc.a; \
2183 $(INSTALL_DATA) libobjc.a $(libsubdir)/libobjc.a; \
2184 if $(RANLIB_TEST) ; then \
2185 (cd $(libsubdir); $(RANLIB) libobjc.a); else true; fi; \
2186 chmod a-x $(libsubdir)/libobjc.a; \
2187 else true; fi
2188
2189# Install all the header files built in the include subdirectory.
2190install-headers: install-include-dir $(INSTALL_HEADERS_DIR) $(INSTALL_ASSERT_H)
2191# Fix symlinks to absolute paths in the installed include directory to
2192# point to the installed directory, not the build directory.
2465# Install all the header files built in the include subdirectory.
2466install-headers: install-include-dir $(INSTALL_HEADERS_DIR) $(INSTALL_ASSERT_H)
2467# Fix symlinks to absolute paths in the installed include directory to
2468# point to the installed directory, not the build directory.
2469# Don't need to use LN_S here since we really do need ln -s and no substitutes.
2193 -files=`cd $(libsubdir)/include; find . -type l -print 2>/dev/null`; \
2194 if [ $$? -eq 0 ]; then \
2195 dir=`cd include; pwd`; \
2196 for i in $$files; do \
2197 dest=`ls -ld $(libsubdir)/include/$$i | sed -n 's/.*-> //p'`; \
2198 if expr "$$dest" : "$$dir.*" > /dev/null; then \
2199 rm -f $(libsubdir)/include/$$i; \
2200 ln -s `echo $$i | sed "s|/[^/]*|/..|g" | sed 's|/..$$||'``echo "$$dest" | sed "s|$$dir||"` $(libsubdir)/include/$$i; \
2201 fi; \
2202 done; \
2203 fi
2204
2205# Create or recreate the gcc private include file directory.
2470 -files=`cd $(libsubdir)/include; find . -type l -print 2>/dev/null`; \
2471 if [ $$? -eq 0 ]; then \
2472 dir=`cd include; pwd`; \
2473 for i in $$files; do \
2474 dest=`ls -ld $(libsubdir)/include/$$i | sed -n 's/.*-> //p'`; \
2475 if expr "$$dest" : "$$dir.*" > /dev/null; then \
2476 rm -f $(libsubdir)/include/$$i; \
2477 ln -s `echo $$i | sed "s|/[^/]*|/..|g" | sed 's|/..$$||'``echo "$$dest" | sed "s|$$dir||"` $(libsubdir)/include/$$i; \
2478 fi; \
2479 done; \
2480 fi
2481
2482# Create or recreate the gcc private include file directory.
2206install-include-dir: install-dir
2483install-include-dir: installdirs
2207 -rm -rf $(libsubdir)/include
2208 mkdir $(libsubdir)/include
2209 -chmod a+rx $(libsubdir)/include
2210
2211# Install the include directory using tar.
2212install-headers-tar: stmp-headers $(STMP_FIXPROTO) install-include-dir
2213 (cd include; \
2214 tar -cf - .; exit 0) | (cd $(libsubdir)/include; tar $(TAROUTOPTS) - )

--- 7 unchanged lines hidden (view full) ---

2222
2223# Put assert.h where it won't override GNU libc's assert.h.
2224# It goes in a dir that is searched after GNU libc's headers;
2225# thus, the following conditionals are no longer needed.
2226# But it's not worth deleting them now.
2227## Don't replace the assert.h already there if it is not from GCC.
2228## This code would be simpler if it tested for -f ... && ! grep ...
2229## but supposedly the ! operator is missing in sh on some systems.
2484 -rm -rf $(libsubdir)/include
2485 mkdir $(libsubdir)/include
2486 -chmod a+rx $(libsubdir)/include
2487
2488# Install the include directory using tar.
2489install-headers-tar: stmp-headers $(STMP_FIXPROTO) install-include-dir
2490 (cd include; \
2491 tar -cf - .; exit 0) | (cd $(libsubdir)/include; tar $(TAROUTOPTS) - )

--- 7 unchanged lines hidden (view full) ---

2499
2500# Put assert.h where it won't override GNU libc's assert.h.
2501# It goes in a dir that is searched after GNU libc's headers;
2502# thus, the following conditionals are no longer needed.
2503# But it's not worth deleting them now.
2504## Don't replace the assert.h already there if it is not from GCC.
2505## This code would be simpler if it tested for -f ... && ! grep ...
2506## but supposedly the ! operator is missing in sh on some systems.
2230install-assert-h: assert.h install-dir
2507install-assert-h: assert.h installdirs
2231 if [ -f $(assertdir)/assert.h ]; \
2232 then \
2233 if grep "__eprintf" $(assertdir)/assert.h >/dev/null; \
2234 then \
2235 rm -f $(assertdir)/assert.h; \
2236 $(INSTALL_DATA) $(srcdir)/assert.h $(assertdir)/assert.h; \
2237 chmod a-x $(assertdir)/assert.h; \
2238 else true; \
2239 fi; \
2240 else \
2241 rm -f $(assertdir)/assert.h; \
2242 $(INSTALL_DATA) $(srcdir)/assert.h $(assertdir)/assert.h; \
2243 chmod a-x $(assertdir)/assert.h; \
2244 fi
2245
2508 if [ -f $(assertdir)/assert.h ]; \
2509 then \
2510 if grep "__eprintf" $(assertdir)/assert.h >/dev/null; \
2511 then \
2512 rm -f $(assertdir)/assert.h; \
2513 $(INSTALL_DATA) $(srcdir)/assert.h $(assertdir)/assert.h; \
2514 chmod a-x $(assertdir)/assert.h; \
2515 else true; \
2516 fi; \
2517 else \
2518 rm -f $(assertdir)/assert.h; \
2519 $(INSTALL_DATA) $(srcdir)/assert.h $(assertdir)/assert.h; \
2520 chmod a-x $(assertdir)/assert.h; \
2521 fi
2522
2246# Use this target to install the program `collect2' under the name `ld'.
2247install-collect2: collect2 install-dir
2248 $(INSTALL_PROGRAM) collect2$(exeext) $(libsubdir)/ld$(exeext)
2523# Use this target to install the program `collect2' under the name `collect2'.
2524install-collect2: collect2 installdirs
2525 $(INSTALL_PROGRAM) collect2$(exeext) $(libsubdir)/collect2$(exeext)
2249# Install the driver program as $(libsubdir)/gcc for collect2.
2250 $(INSTALL_PROGRAM) xgcc$(exeext) $(libsubdir)/gcc$(exeext)
2251
2252# Cancel installation by deleting the installed files.
2526# Install the driver program as $(libsubdir)/gcc for collect2.
2527 $(INSTALL_PROGRAM) xgcc$(exeext) $(libsubdir)/gcc$(exeext)
2528
2529# Cancel installation by deleting the installed files.
2253uninstall: lang.uninstall
2530uninstall: lang.uninstall $(UNINSTALL_CPP)
2254 -rm -rf $(libsubdir)
2255 -rm -rf $(bindir)/$(GCC_INSTALL_NAME)$(exeext)
2256 -rm -rf $(bindir)/$(GCC_CROSS_NAME)$(exeext)
2257 -rm -rf $(bindir)/protoize$(exeext)
2258 -rm -rf $(bindir)/unprotoize$(exeext)
2531 -rm -rf $(libsubdir)
2532 -rm -rf $(bindir)/$(GCC_INSTALL_NAME)$(exeext)
2533 -rm -rf $(bindir)/$(GCC_CROSS_NAME)$(exeext)
2534 -rm -rf $(bindir)/protoize$(exeext)
2535 -rm -rf $(bindir)/unprotoize$(exeext)
2536 -rm -rf $(bindir)/gcov$(exeext)
2259 -rm -rf $(mandir)/$(GCC_INSTALL_NAME)$(manext)
2260 -rm -rf $(mandir)/$(GCC_CROSS_NAME)$(manext)
2261 -rm -rf $(mandir)/cccp$(manext)
2262 -rm -rf $(mandir)/protoize$(manext)
2263 -rm -rf $(mandir)/unprotoize$(manext)
2537 -rm -rf $(mandir)/$(GCC_INSTALL_NAME)$(manext)
2538 -rm -rf $(mandir)/$(GCC_CROSS_NAME)$(manext)
2539 -rm -rf $(mandir)/cccp$(manext)
2540 -rm -rf $(mandir)/protoize$(manext)
2541 -rm -rf $(mandir)/unprotoize$(manext)
2264
2542 -rm -f $(infodir)/cpp.info* $(infodir)/gcc.info*
2543#
2544# These targets are for the dejagnu testsuites. The file site.exp
2545# contains global variables that all the testsuites will use.
2546
2547# Set to $(target_alias)/ for cross.
2548target_subdir = @target_subdir@
2549
2550site.exp: ./config.status Makefile
2551 @echo "Making a new config file..."
2552 -@rm -f ./tmp?
2553 @touch site.exp
2554 -@mv site.exp site.bak
2555 @echo "## these variables are automatically generated by make ##" > ./tmp0
2556 @echo "# Do not edit here. If you wish to override these values" >> ./tmp0
2557 @echo "# add them to the last section" >> ./tmp0
2558 @echo "set rootme \"`pwd`\"" >> ./tmp0
2559 @echo "set srcdir \"`cd ${srcdir}; pwd`\"" >> ./tmp0
2560 @echo "set host_triplet $(host_canonical)" >> ./tmp0
2561 @echo "set build_triplet $(build_canonical)" >> ./tmp0
2562 @echo "set target_triplet $(target)" >> ./tmp0
2563 @echo "set target_alias $(target_alias)" >> ./tmp0
2564# CFLAGS is set even though it's empty to show we reserve the right to set it.
2565 @echo "set CFLAGS \"\"" >> ./tmp0
2566 @echo "set CXXFLAGS \"-I$(objdir)/../$(target_subdir)libio -I\$$srcdir/../libg++/src -I\$$srcdir/../libio -I\$$srcdir/../libstdc++ -I\$$srcdir/../libstdc++/stl -L$(objdir)/../$(target_subdir)libg++ -L$(objdir)/../$(target_subdir)libstdc++\"" >> ./tmp0
2567# If newlib has been configured, we need to pass -B to gcc so it can find
2568# newlib's crt0.o if it exists. This will cause a "path prefix not used"
2569# message if it doesn't, but the testsuite is supposed to ignore the message -
2570# it's too difficult to tell when to and when not to pass -B (not all targets
2571# have crt0's). We could only add the -B if ../newlib/crt0.o exists, but that
2572# seems like too selective a test.
2573# ??? Another way to solve this might be to rely on linker scripts. Then
2574# theoretically the -B won't be needed.
2575# We also need to pass -L ../ld so that the linker can find ldscripts.
2576 @if [ -d $(objdir)/../$(target_subdir)newlib ] ; then \
2577 echo "set newlib_cflags \"-I$(objdir)/../$(target_subdir)newlib/targ-include -I\$$srcdir/../newlib/libc/include\"" >> ./tmp0; \
2578 echo "set newlib_ldflags \"-B$(objdir)/../$(target_subdir)newlib/\"" >> ./tmp0; \
2579 echo "append CFLAGS \" \$$newlib_cflags\"" >> ./tmp0; \
2580 echo "append CXXFLAGS \" \$$newlib_cflags\"" >> ./tmp0; \
2581 echo "append LDFLAGS \" \$$newlib_ldflags\"" >> ./tmp0; \
2582 else true; \
2583 fi
2584 @if [ -d $(objdir)/../ld ] ; then \
2585 echo "append LDFLAGS \" -L$(objdir)/../ld\"" >> ./tmp0; \
2586 else true; \
2587 fi
2588 echo "set tmpdir $(objdir)/testsuite" >> ./tmp0
2589 @echo "set srcdir \"\$${srcdir}/testsuite\"" >> ./tmp0
2590 @echo "## All variables above are generated by configure. Do Not Edit ##" >> ./tmp0
2591 @cat ./tmp0 > site.exp
2592 @cat site.bak | sed \
2593 -e '1,/^## All variables above are.*##/ d' >> site.exp
2594 -@rm -f ./tmp?
2595
2596CHECK_TARGETS = check-gcc check-g++ check-g77
2597
2598check: $(CHECK_TARGETS)
2599
2600testsuite/site.exp: site.exp
2601 if [ -d testsuite ]; then \
2602 true; \
2603 else \
2604 mkdir testsuite; \
2605 fi
2606 rm -rf testsuite/site.exp
2607 cp site.exp testsuite/site.exp
2608
2609check-g++: testsuite/site.exp
2610 -rootme=`pwd`; export rootme; \
2611 srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
2612 cd testsuite; \
2613 EXPECT=${EXPECT} ; export EXPECT ; \
2614 if [ -f $${rootme}/../expect/expect ] ; then \
2615 TCL_LIBRARY=$${srcdir}/../tcl/library ; \
2616 export TCL_LIBRARY ; fi ; \
2617 $(RUNTEST) --tool g++ $(RUNTESTFLAGS)
2618
2619check-gcc: testsuite/site.exp
2620 -rootme=`pwd`; export rootme; \
2621 srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
2622 cd testsuite; \
2623 EXPECT=${EXPECT} ; export EXPECT ; \
2624 if [ -f $${rootme}/../expect/expect ] ; then \
2625 TCL_LIBRARY=$${srcdir}/../tcl/library ; \
2626 export TCL_LIBRARY ; fi ; \
2627 $(RUNTEST) --tool gcc $(RUNTESTFLAGS)
2628
2629check-g77: testsuite/site.exp
2630 -rootme=`pwd`; export rootme; \
2631 srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
2632 cd testsuite; \
2633 EXPECT=${EXPECT} ; export EXPECT ; \
2634 if [ -f $${rootme}/../expect/expect ] ; then \
2635 TCL_LIBRARY=$${srcdir}/../tcl/library ; \
2636 export TCL_LIBRARY ; fi ; \
2637 $(RUNTEST) --tool g77 $(RUNTESTFLAGS)
2638
2265# These exist for maintenance purposes.
2266
2267# Update the tags table.
2268TAGS: force
2269 cd $(srcdir); \
2639# These exist for maintenance purposes.
2640
2641# Update the tags table.
2642TAGS: force
2643 cd $(srcdir); \
2270 mkdir temp; \
2271 mv -f c-parse.[ch] objc-parse.c cexp.c =*.[chy] temp; \
2644 mkdir tmp-tags; \
2645 mv -f c-parse.[ch] cexp.c =*.[chy] tmp-tags; \
2272 etags *.y *.h *.c; \
2646 etags *.y *.h *.c; \
2273 mv temp/* .; \
2274 rmdir temp
2647 mv tmp-tags/* .; \
2648 rmdir tmp-tags
2275
2649
2276# Create the distribution tar file.
2277#dist: gcc-$(version).tar.gz
2278dist: gcc.xtar.gz
2650# Create the distribution tar.gz file.
2651dist: tmp-gcc.xtar
2652 gzip --best < tmp-gcc.xtar > tmp-gcc.xtar.gz
2653 mv tmp-gcc.xtar.gz gcc-$(version).tar.gz
2279
2654
2280gcc.xtar.gz: gcc.xtar
2281 gzip --best < gcc.xtar > tmp-gcc.xtar.gz
2282 mv tmp-gcc.xtar.gz gcc.xtar.gz
2283
2284#gcc-$(version).tar.gz: gcc-$(version).tar
2285# gzip < gcc-$(version).tar > gcc-$(version).tar.gz
2286
2287#gcc-$(version).tar:
2288gcc.xtar: distdir
2655tmp-gcc.xtar: distdir
2289# Make the distribution.
2656# Make the distribution.
2290 tar -chf gcc.xtar gcc-$(version)
2657 tar -chf tmp-gcc.xtar gcc-$(version)
2291
2658
2659distdir-cvs: force
2660 if [ -d $(srcdir)/CVS ]; then cvs -r update; fi
2661
2292# This target exists to do the initial work before the language specific
2293# stuff gets done.
2294distdir-start: doc $(srcdir)/INSTALL $(srcdir)/c-parse.y $(srcdir)/c-gperf.h \
2662# This target exists to do the initial work before the language specific
2663# stuff gets done.
2664distdir-start: doc $(srcdir)/INSTALL $(srcdir)/c-parse.y $(srcdir)/c-gperf.h \
2295 $(srcdir)/objc-parse.y $(srcdir)/c-parse.c $(srcdir)/objc-parse.c \
2296 $(srcdir)/cexp.c
2665 $(srcdir)/c-parse.c $(srcdir)/cexp.c $(srcdir)/config.in \
2666 $(srcdir)/version.c TAGS
2297 @if grep -s "for version ${mainversion}" gcc.texi > /dev/null; \
2298 then true; \
2299 else echo "You must update the version number in \`gcc.texi'"; sleep 10;\
2300 fi
2301# Update the version number in README
2302 awk '$$1 " " $$2 " " $$3 == "This directory contains" \
2303 { $$6 = version; print $$0 } \
2304 $$1 " " $$2 " " $$3 != "This directory contains"' \
2305 version=$(version) README > tmp.README
2306 mv tmp.README README
2307 -rm -rf gcc-$(version) tmp
2308# Put all the files in a temporary subdirectory
2309# which has the name that we want to have in the tar file.
2310 mkdir tmp
2311 mkdir tmp/config
2312 mkdir tmp/ginclude
2667 @if grep -s "for version ${mainversion}" gcc.texi > /dev/null; \
2668 then true; \
2669 else echo "You must update the version number in \`gcc.texi'"; sleep 10;\
2670 fi
2671# Update the version number in README
2672 awk '$$1 " " $$2 " " $$3 == "This directory contains" \
2673 { $$6 = version; print $$0 } \
2674 $$1 " " $$2 " " $$3 != "This directory contains"' \
2675 version=$(version) README > tmp.README
2676 mv tmp.README README
2677 -rm -rf gcc-$(version) tmp
2678# Put all the files in a temporary subdirectory
2679# which has the name that we want to have in the tar file.
2680 mkdir tmp
2681 mkdir tmp/config
2682 mkdir tmp/ginclude
2313 mkdir tmp/objc
2314 for file in *[0-9a-zA-Z+]; do \
2683 for file in *[0-9a-zA-Z+]; do \
2315 ln $$file tmp > /dev/null 2>&1 || cp $$file tmp; \
2684 $(LN) $$file tmp; \
2316 done
2317 cd config; \
2318 for file in *[0-9a-zA-Z+]; do \
2685 done
2686 cd config; \
2687 for file in *[0-9a-zA-Z+]; do \
2319 if test -d $$file && test "$$file" != RCS; then \
2688 if test -d $$file && test "$$file" != RCS && test "$$file" != CVS; then \
2320 mkdir ../tmp/config/$$file; \
2321 cd $$file; \
2322 for subfile in *[0-9a-zA-Z+]; do \
2689 mkdir ../tmp/config/$$file; \
2690 cd $$file; \
2691 for subfile in *[0-9a-zA-Z+]; do \
2323 ln $$subfile ../../tmp/config/$$file >/dev/null 2>&1 \
2324 || cp $$subfile ../../tmp/config/$$file; \
2692 $(LN) $$subfile ../../tmp/config/$$file; \
2325 done; \
2326 cd ..; \
2327 else \
2693 done; \
2694 cd ..; \
2695 else \
2328 ln $$file ../tmp/config >/dev/null 2>&1 \
2329 || cp $$file ../tmp/config; \
2696 $(LN) $$file ../tmp/config; \
2330 fi; \
2331 done
2332 cd ginclude; \
2333 for file in *[0-9a-zA-Z+]; do \
2697 fi; \
2698 done
2699 cd ginclude; \
2700 for file in *[0-9a-zA-Z+]; do \
2334 ln $$file ../tmp/ginclude >/dev/null 2>&1 \
2335 || cp $$file ../tmp/ginclude; \
2701 $(LN) $$file ../tmp/ginclude; \
2336 done
2337 cd objc; \
2338 for file in *[0-9a-zA-Z+]; do \
2702 done
2703 cd objc; \
2704 for file in *[0-9a-zA-Z+]; do \
2339 ln $$file ../tmp/objc >/dev/null 2>&1 || cp $$file ../tmp/objc; \
2705 $(LN) $$file ../tmp/objc; \
2340 done
2706 done
2341 ln .gdbinit tmp
2707 $(LN) .gdbinit tmp
2342
2343# Finish making `distdir', after the languages have done their thing.
2344distdir-finish:
2345 mv tmp gcc-$(version)
2346# Get rid of everything we don't want in the distribution. We'd want
2347# this to use Makefile.in, but it doesn't have the `lang.foo' targets
2348# expanded.
2708
2709# Finish making `distdir', after the languages have done their thing.
2710distdir-finish:
2711 mv tmp gcc-$(version)
2712# Get rid of everything we don't want in the distribution. We'd want
2713# this to use Makefile.in, but it doesn't have the `lang.foo' targets
2714# expanded.
2349 cd gcc-$(version); make extraclean
2715 cd gcc-$(version); make extraclean VERSION_DEP=
2350
2716
2351distdir: distdir-start lang.distdir distdir-finish
2717distdir: distdir-cvs distdir-start lang.distdir distdir-finish
2352
2353# make diff oldversion=M.N
2354# creates a diff file between an older distribution and this one.
2355# The -P option assumes this is GNU diff.
2356diff:
2357 diff -rc2P -x c-parse.y -x c-parse.c -x c-parse.h -x c-gperf.h \
2718
2719# make diff oldversion=M.N
2720# creates a diff file between an older distribution and this one.
2721# The -P option assumes this is GNU diff.
2722diff:
2723 diff -rc2P -x c-parse.y -x c-parse.c -x c-parse.h -x c-gperf.h \
2358 -x cexp.c -x bi-parser.c -x objc-parse.y -x objc-parse.c \
2359 -x TAGS \
2724 -x cexp.c -x -x TAGS -x INSTALL \
2725 -x configure -x config.in \
2360 -x "gcc.??" -x "gcc.??s" -x gcc.aux -x "gcc.info*" \
2361 -x "cpp.??" -x "cpp.??s" -x cpp.aux -x "cpp.info*" \
2362 $(LANG_DIFF_EXCLUDES) \
2726 -x "gcc.??" -x "gcc.??s" -x gcc.aux -x "gcc.info*" \
2727 -x "cpp.??" -x "cpp.??s" -x cpp.aux -x "cpp.info*" \
2728 $(LANG_DIFF_EXCLUDES) \
2363 gcc-$(oldversion) gcc-$(version) > diffs
2729 gcc-$(oldversion) gcc-$(version) > gcc-$(oldversion)-$(version).diff
2364
2730
2365bootstrap: force
2731bootstrap bootstrap-lean: force
2366# Only build the C compiler for stage1, because that is the only one that
2367# we can guarantee will build with the native compiler, and also it is the
2368# only thing useful for building stage2.
2732# Only build the C compiler for stage1, because that is the only one that
2733# we can guarantee will build with the native compiler, and also it is the
2734# only thing useful for building stage2.
2369 $(MAKE) CC="$(CC)" libdir=$(libdir) LANGUAGES=c
2735 $(MAKE) CC="$(CC)" libdir=$(libdir) LANGUAGES="$(BOOT_LANGUAGES)"
2370 $(MAKE) stage1
2371# This used to define ALLOCA as empty, but that would lead to bad results
2372# for a subsequent `make install' since that would not have ALLOCA empty.
2373# To prevent `make install' from compiling alloca.o and then relinking cc1
2374# because alloca.o is newer, we permit these recursive makes to compile
2375# alloca.o. Then cc1 is newer, so it won't have to be relinked.
2736 $(MAKE) stage1
2737# This used to define ALLOCA as empty, but that would lead to bad results
2738# for a subsequent `make install' since that would not have ALLOCA empty.
2739# To prevent `make install' from compiling alloca.o and then relinking cc1
2740# because alloca.o is newer, we permit these recursive makes to compile
2741# alloca.o. Then cc1 is newer, so it won't have to be relinked.
2376 $(MAKE) CC="stage1/xgcc -Bstage1/" CFLAGS="$(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage1/ LANGUAGES="$(LANGUAGES)"
2742 $(MAKE) CC="stage1/xgcc$(exeext) -Bstage1/" CFLAGS="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage1/ LANGUAGES="$(LANGUAGES)"
2377 $(MAKE) stage2
2743 $(MAKE) stage2
2378 $(MAKE) CC="stage2/xgcc -Bstage2/" CFLAGS="$(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage2/ LANGUAGES="$(LANGUAGES)"
2744 -if test $@ = bootstrap-lean; then rm -rf stage1; else true; fi
2745 $(MAKE) CC="stage2/xgcc$(exeext) -Bstage2/" CFLAGS="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage2/ LANGUAGES="$(LANGUAGES)"
2379
2746
2380bootstrap2: force
2381 $(MAKE) CC="stage1/xgcc -Bstage1/" CFLAGS="$(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage1/ LANGUAGES="$(LANGUAGES)"
2747bootstrap2 bootstrap2-lean: force
2748 $(MAKE) CC="stage1/xgcc$(exeext) -Bstage1/" CFLAGS="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage1/ LANGUAGES="$(LANGUAGES)"
2382 $(MAKE) stage2
2749 $(MAKE) stage2
2383 $(MAKE) CC="stage2/xgcc -Bstage2/" CFLAGS="$(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage2/ LANGUAGES="$(LANGUAGES)"
2750 -if test $@ = bootstrap2-lean; then rm -rf stage1; else true; fi
2751 $(MAKE) CC="stage2/xgcc$(exeext) -Bstage2/" CFLAGS="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage2/ LANGUAGES="$(LANGUAGES)"
2384
2752
2385bootstrap3: force
2386 $(MAKE) CC="stage2/xgcc -Bstage2/" CFLAGS="$(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage2/ LANGUAGES="$(LANGUAGES)"
2753bootstrap3 bootstrap3-lean: force
2754 $(MAKE) CC="stage2/xgcc$(exeext) -Bstage2/" CFLAGS="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage2/ LANGUAGES="$(LANGUAGES)"
2387
2755
2756bootstrap4 bootstrap4-lean: force
2757 $(MAKE) CC="stage3/xgcc$(exeext) -Bstage3/" CFLAGS="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage3/ LANGUAGES="$(LANGUAGES)"
2758
2388# Compare the object files in the current directory with those in the
2389# stage2 directory.
2390
2391# ./ avoids bug in some versions of tail.
2759# Compare the object files in the current directory with those in the
2760# stage2 directory.
2761
2762# ./ avoids bug in some versions of tail.
2392compare: force
2763compare compare3 compare4 compare-lean compare3-lean compare4-lean: force
2764 -rm -f .bad_compare
2765 case "$@" in compare | compare-lean ) stage=2 ;; * ) stage=`echo $@ | sed -e 's,^compare\([0-9][0-9]*\).*,\1,'` ;; esac; \
2393 for file in *$(objext); do \
2394 tail +16c ./$$file > tmp-foo1; \
2766 for file in *$(objext); do \
2767 tail +16c ./$$file > tmp-foo1; \
2395 tail +16c stage2/$$file > tmp-foo2 2>/dev/null \
2396 && (cmp tmp-foo1 tmp-foo2 || echo $$file differs) || true; \
2768 tail +16c stage$$stage/$$file > tmp-foo2 \
2769 && (cmp tmp-foo1 tmp-foo2 > /dev/null 2>&1 || echo $$file differs >> .bad_compare) || true; \
2397 done
2770 done
2771 case "$@" in compare | compare-lean ) stage=2 ;; * ) stage=`echo $@ | sed -e 's,^compare\([0-9][0-9]*\).*,\1,'` ;; esac; \
2398 for dir in tmp-foo $(SUBDIRS); do \
2399 if [ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \
2400 for file in $$dir/*$(objext); do \
2772 for dir in tmp-foo $(SUBDIRS); do \
2773 if [ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \
2774 for file in $$dir/*$(objext); do \
2401 tail +16c ./$$file > tmp-foo1; \
2402 tail +16c stage2/$$file > tmp-foo2 2>/dev/null \
2403 && (cmp tmp-foo1 tmp-foo2 || echo $$file differs) || true; \
2775 if [ $$file != objc/NXConstStr.o -a $$file != objc/Object.o -a $$file != objc/Protocol.o -a $$file != objc/linking.o ] ; then \
2776 tail +16c ./$$file > tmp-foo1; \
2777 tail +16c stage$$stage/$$file > tmp-foo2 \
2778 && (cmp tmp-foo1 tmp-foo2 > /dev/null 2>&1 || echo $$file differs >> .bad_compare) || true; \
2779 else true; fi; \
2404 done; \
2405 fi; \
2406 done
2407 -rm -f tmp-foo*
2780 done; \
2781 fi; \
2782 done
2783 -rm -f tmp-foo*
2784 case "$@" in compare | compare-lean ) stage=2 ;; * ) stage=`echo $@ | sed -e 's,^compare\([0-9][0-9]*\).*,\1,'` ;; esac; \
2785 if [ -f .bad_compare ]; then \
2786 echo "Bootstrap comparison failure!"; \
2787 cat .bad_compare; \
2788 exit 1; \
2789 else \
2790 case "$@" in \
2791 *-lean ) rm -rf stage$$stage ;; \
2792 *) ;; \
2793 esac; true; \
2794 fi
2408
2795
2409# Similar, but compare with stage3 directory
2410compare3: force
2411 for file in *$(objext); do \
2412 tail +16c ./$$file > tmp-foo1; \
2413 tail +16c stage3/$$file > tmp-foo2 2>/dev/null \
2414 && (cmp tmp-foo1 tmp-foo2 || echo $$file differs) || true; \
2415 done
2416 for dir in tmp-foo $(SUBDIRS); do \
2417 if [ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \
2418 for file in $$dir/*$(objext); do \
2419 tail +16c ./$$file > tmp-foo1; \
2420 tail +16c stage3/$$file > tmp-foo2 2>/dev/null \
2421 && (cmp tmp-foo1 tmp-foo2 || echo $$file differs) || true; \
2422 done; \
2423 fi; \
2424 done
2425 -rm -f tmp-foo*
2426
2427# Compare the object files in the current directory with those in the
2428# stage2 directory. Use gnu cmp (diffutils v2.4 or later) to avoid
2429# running tail and the overhead of twice copying each object file.
2430
2796# Compare the object files in the current directory with those in the
2797# stage2 directory. Use gnu cmp (diffutils v2.4 or later) to avoid
2798# running tail and the overhead of twice copying each object file.
2799
2431gnucompare: force
2800gnucompare gnucompare3 gnucompare4 gnucompare-lean gnucompare3-lean gnucompare4-lean: force
2801 -rm -f .bad_compare
2802 case "$@" in gnucompare | gnucompare-lean ) stage=2 ;; * ) stage=`echo $@ | sed -e 's,^gnucompare\([0-9][0-9]*\).*,\1,'` ;; esac; \
2432 for file in *$(objext); do \
2803 for file in *$(objext); do \
2433 cmp --ignore-initial=16 $$file stage2/$$file || true ; \
2804 (cmp --ignore-initial=16 $$file stage$$stage/$$file > /dev/null 2>&1 || echo $$file differs >> .bad_compare) || true; \
2434 done
2805 done
2806 case "$@" in gnucompare | gnucompare-lean ) stage=2 ;; * ) stage=`echo $@ | sed -e 's,^gnucompare\([0-9][0-9]*\).*,\1,'` ;; esac; \
2435 for dir in tmp-foo $(SUBDIRS); do \
2436 if [ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \
2437 for file in $$dir/*$(objext); do \
2807 for dir in tmp-foo $(SUBDIRS); do \
2808 if [ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \
2809 for file in $$dir/*$(objext); do \
2438 cmp --ignore-initial=16 $$file stage2/$$file || true ; \
2810 if [ $$file != objc/NXConstStr.o -a $$file != objc/Object.o -a $$file != objc/Protocol.o -a $$file != objc/linking.o ] ; then \
2811 (cmp --ignore-initial=16 $$file stage$$stage/$$file > /dev/null 2>&1 || echo $$file differs >> .bad_compare) || true; \
2812 else true; fi; \
2439 done; \
2440 fi; \
2441 done
2813 done; \
2814 fi; \
2815 done
2816 case "$@" in gnucompare | gnucompare-lean ) stage=2 ;; * ) stage=`echo $@ | sed -e 's,^gnucompare\([0-9][0-9]*\).*,\1,'` ;; esac; \
2817 if [ -f .bad_compare ]; then \
2818 echo "Bootstrap comparison failure!"; \
2819 cat .bad_compare; \
2820 exit 1; \
2821 else \
2822 case "$@" in \
2823 *-lean ) rm -rf stage$$stage ;; \
2824 esac; true; \
2825 fi
2442
2826
2443# Similar, but compare with stage3 directory
2444gnucompare3: force
2445 for file in *$(objext); do \
2446 cmp --ignore-initial=16 $$file stage3/$$file || true ; \
2447 done
2448 for dir in tmp-foo $(SUBDIRS); do \
2449 if [ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \
2450 for file in $$dir/*$(objext); do \
2451 cmp --ignore-initial=16 $$file stage3/$$file || true ; \
2452 done; \
2453 fi; \
2454 done
2455
2456# Copy the object files from a particular stage into a subdirectory.
2457stage1-start:
2458 -if [ -d stage1 ] ; then true ; else mkdir stage1 ; fi
2459 -for dir in . $(SUBDIRS) ; \
2460 do \
2461 if [ -d stage1/$$dir ] ; then true ; else mkdir stage1/$$dir ; fi ; \
2462 done
2463 -mv $(STAGESTUFF) stage1
2464# Copy as/ld if they exist to stage dir, so that running xgcc from the stage
2465# dir will work properly.
2827# Copy the object files from a particular stage into a subdirectory.
2828stage1-start:
2829 -if [ -d stage1 ] ; then true ; else mkdir stage1 ; fi
2830 -for dir in . $(SUBDIRS) ; \
2831 do \
2832 if [ -d stage1/$$dir ] ; then true ; else mkdir stage1/$$dir ; fi ; \
2833 done
2834 -mv $(STAGESTUFF) stage1
2835# Copy as/ld if they exist to stage dir, so that running xgcc from the stage
2836# dir will work properly.
2466 -if [ -f as$(exeext) ] ; then ln -s ../as$(exeext) stage1 || cp as$(exeext) stage1 ; else true ; fi
2467 -if [ -f ld$(exeext) ] ; then ln -s ../ld$(exeext) stage1 || cp ld$(exeext) stage1 ; else true ; fi
2468 -if [ -f collect-ld$(exeext) ] ; then ln -s ../collect-ld$(exeext) stage1 || cp collect-ld$(exeext) stage1 ; else true ; fi
2837 -if [ -f as$(exeext) ] ; then $(LN_S) ../as$(exeext) stage1 ; else true ; fi
2838 -if [ -f ld$(exeext) ] ; then $(LN_S) ../ld$(exeext) stage1 ; else true ; fi
2839 -if [ -f collect-ld$(exeext) ] ; then $(LN_S) ../collect-ld$(exeext) stage1 ; else true ; fi
2469 -rm -f stage1/libgcc.a
2470 -cp libgcc.a stage1
2471 -if $(RANLIB_TEST) ; then $(RANLIB) stage1/libgcc.a; else true; fi
2840 -rm -f stage1/libgcc.a
2841 -cp libgcc.a stage1
2842 -if $(RANLIB_TEST) ; then $(RANLIB) stage1/libgcc.a; else true; fi
2843 -for f in .. $(EXTRA_MULTILIB_PARTS); do if [ x$${f} != x.. ]; then \
2844 cp stage1/$${f} . ; \
2845 else true; \
2846 fi; done
2472stage1: force stage1-start lang.stage1
2473
2474stage2-start:
2475 -if [ -d stage2 ] ; then true ; else mkdir stage2 ; fi
2476 -for dir in . $(SUBDIRS) ; \
2477 do \
2478 if [ -d stage2/$$dir ] ; then true ; else mkdir stage2/$$dir ; fi ; \
2479 done
2480 -mv $(STAGESTUFF) stage2
2481# Copy as/ld if they exist to stage dir, so that running xgcc from the stage
2482# dir will work properly.
2847stage1: force stage1-start lang.stage1
2848
2849stage2-start:
2850 -if [ -d stage2 ] ; then true ; else mkdir stage2 ; fi
2851 -for dir in . $(SUBDIRS) ; \
2852 do \
2853 if [ -d stage2/$$dir ] ; then true ; else mkdir stage2/$$dir ; fi ; \
2854 done
2855 -mv $(STAGESTUFF) stage2
2856# Copy as/ld if they exist to stage dir, so that running xgcc from the stage
2857# dir will work properly.
2483 -if [ -f as$(exeext) ] ; then ln -s ../as$(exeext) stage2 || cp as$(exeext) stage2 ; else true ; fi
2484 -if [ -f ld$(exeext) ] ; then ln -s ../ld$(exeext) stage2 || cp ld$(exeext) stage2 ; else true ; fi
2485 -if [ -f collect-ld ] ; then ln -s ../collect-ld$(exeext) stage2 || cp collect-ld$(exeext) stage2 ; else true ; fi
2858 -if [ -f as$(exeext) ] ; then $(LN_S) ../as$(exeext) stage2 ; else true ; fi
2859 -if [ -f ld$(exeext) ] ; then $(LN_S) ../ld$(exeext) stage2 ; else true ; fi
2860 -if [ -f collect-ld ] ; then $(LN_S) ../collect-ld$(exeext) stage2 ; else true ; fi
2486 -rm -f stage2/libgcc.a
2487 -cp libgcc.a stage2
2488 -if $(RANLIB_TEST) ; then $(RANLIB) stage2/libgcc.a; else true; fi
2861 -rm -f stage2/libgcc.a
2862 -cp libgcc.a stage2
2863 -if $(RANLIB_TEST) ; then $(RANLIB) stage2/libgcc.a; else true; fi
2864 -for f in .. $(EXTRA_MULTILIB_PARTS); do if [ x$${f} != x.. ]; then \
2865 cp stage2/$${f} . ; \
2866 else true; \
2867 fi; done
2489stage2: force stage2-start lang.stage2
2490
2491stage3-start:
2492 -if [ -d stage3 ] ; then true ; else mkdir stage3 ; fi
2493 -for dir in . $(SUBDIRS) ; \
2494 do \
2495 if [ -d stage3/$$dir ] ; then true ; else mkdir stage3/$$dir ; fi ; \
2496 done
2497 -mv $(STAGESTUFF) stage3
2498# Copy as/ld if they exist to stage dir, so that running xgcc from the stage
2499# dir will work properly.
2868stage2: force stage2-start lang.stage2
2869
2870stage3-start:
2871 -if [ -d stage3 ] ; then true ; else mkdir stage3 ; fi
2872 -for dir in . $(SUBDIRS) ; \
2873 do \
2874 if [ -d stage3/$$dir ] ; then true ; else mkdir stage3/$$dir ; fi ; \
2875 done
2876 -mv $(STAGESTUFF) stage3
2877# Copy as/ld if they exist to stage dir, so that running xgcc from the stage
2878# dir will work properly.
2500 -if [ -f as$(exeext) ] ; then ln -s ../as$(exeext) stage3 || cp as$(exeext) stage3 ; else true ; fi
2501 -if [ -f ld$(exeext) ] ; then ln -s ../ld$(exeext) stage3 || cp ld$(exeext) stage3 ; else true ; fi
2502 -if [ -f collect-ld$(exeext) ] ; then ln -s ../collect-ld$(exeext) stage3 || cp collect-ld$(exeext) stage3 ; else true ; fi
2879 -if [ -f as$(exeext) ] ; then $(LN_S) ../as$(exeext) stage3 ; else true ; fi
2880 -if [ -f ld$(exeext) ] ; then $(LN_S) ../ld$(exeext) stage3 ; else true ; fi
2881 -if [ -f collect-ld$(exeext) ] ; then $(LN_S) ../collect-ld$(exeext) stage3 ; else true ; fi
2503 -rm -f stage3/libgcc.a
2504 -cp libgcc.a stage3
2505 -if $(RANLIB_TEST) ; then $(RANLIB) stage3/libgcc.a; else true; fi
2882 -rm -f stage3/libgcc.a
2883 -cp libgcc.a stage3
2884 -if $(RANLIB_TEST) ; then $(RANLIB) stage3/libgcc.a; else true; fi
2885 -for f in .. $(EXTRA_MULTILIB_PARTS); do if [ x$${f} != x.. ]; then \
2886 cp stage3/$${f} . ; \
2887 else true; \
2888 fi; done
2506stage3: force stage3-start lang.stage3
2507
2508stage4-start:
2509 -if [ -d stage4 ] ; then true ; else mkdir stage4 ; fi
2510 -for dir in . $(SUBDIRS) ; \
2511 do \
2512 if [ -d stage4/$$dir ] ; then true ; else mkdir stage4/$$dir ; fi ; \
2513 done
2514 -mv $(STAGESTUFF) stage4
2515# Copy as/ld if they exist to stage dir, so that running xgcc from the stage
2516# dir will work properly.
2889stage3: force stage3-start lang.stage3
2890
2891stage4-start:
2892 -if [ -d stage4 ] ; then true ; else mkdir stage4 ; fi
2893 -for dir in . $(SUBDIRS) ; \
2894 do \
2895 if [ -d stage4/$$dir ] ; then true ; else mkdir stage4/$$dir ; fi ; \
2896 done
2897 -mv $(STAGESTUFF) stage4
2898# Copy as/ld if they exist to stage dir, so that running xgcc from the stage
2899# dir will work properly.
2517 -if [ -f as$(exeext) ] ; then ln -s ../as$(exeext) stage4 || cp as$(exeext) stage4 ; else true ; fi
2518 -if [ -f ld$(exeext) ] ; then ln -s ../ld$(exeext) stage4 || cp ld$(exeext) stage4 ; else true ; fi
2519 -if [ -f collect-ld$(exeext) ] ; then ln -s ../collect-ld$(exeext) stage4 || cp collect-ld$(exeext) stage4 ; else true ; fi
2900 -if [ -f as$(exeext) ] ; then $(LN_S) ../as$(exeext) stage4 ; else true ; fi
2901 -if [ -f ld$(exeext) ] ; then $(LN_S) ../ld$(exeext) stage4 ; else true ; fi
2902 -if [ -f collect-ld$(exeext) ] ; then $(LN_S) ../collect-ld$(exeext) stage4 ; else true ; fi
2520 -rm -f stage4/libgcc.a
2521 -cp libgcc.a stage4
2522 -if $(RANLIB_TEST) ; then $(RANLIB) stage4/libgcc.a; else true; fi
2903 -rm -f stage4/libgcc.a
2904 -cp libgcc.a stage4
2905 -if $(RANLIB_TEST) ; then $(RANLIB) stage4/libgcc.a; else true; fi
2906 -for f in .. $(EXTRA_MULTILIB_PARTS); do if [ x$${f} != x.. ]; then \
2907 cp stage4/$${f} . ; \
2908 else true; \
2909 fi; done
2523stage4: force stage4-start lang.stage4
2524
2525# Copy just the executable files from a particular stage into a subdirectory,
2526# and delete the object files. Use this if you're just verifying a version
2527# that is pretty sure to work, and you are short of disk space.
2528risky-stage1: stage1
2910stage4: force stage4-start lang.stage4
2911
2912# Copy just the executable files from a particular stage into a subdirectory,
2913# and delete the object files. Use this if you're just verifying a version
2914# that is pretty sure to work, and you are short of disk space.
2915risky-stage1: stage1
2529 - make clean
2916 -make clean
2530
2531risky-stage2: stage2
2532 -make clean
2533
2534risky-stage3: stage3
2535 -make clean
2536
2537risky-stage4: stage4
2538 -make clean
2539
2540#In GNU Make, ignore whether `stage*' exists.
2541.PHONY: stage1 stage2 stage3 stage4 clean maintainer-clean TAGS bootstrap
2542.PHONY: risky-stage1 risky-stage2 risky-stage3 risky-stage4
2543
2544force:
2917
2918risky-stage2: stage2
2919 -make clean
2920
2921risky-stage3: stage3
2922 -make clean
2923
2924risky-stage4: stage4
2925 -make clean
2926
2927#In GNU Make, ignore whether `stage*' exists.
2928.PHONY: stage1 stage2 stage3 stage4 clean maintainer-clean TAGS bootstrap
2929.PHONY: risky-stage1 risky-stage2 risky-stage3 risky-stage4
2930
2931force:
2932
2933# ---
2934# The enquire rules are still useful for building new float-anything.h.
2935# Special flags for compiling enquire.
2936# We disable optimization to make floating point more reliable.
2937ENQUIRE_CFLAGS = -DNO_MEM -DNO_LONG_DOUBLE_IO -O0
2938ENQUIRE_LDFLAGS = $(LDFLAGS)
2939
2940# Enquire target (This is a variable so that a target can choose not to
2941# build it.)
2942ENQUIRE = enquire
2943
2944# Test to see whether <float.h> exists in the system header files,
2945# and is not derived from GCC.
2946FLOAT_H_TEST = \
2947 [ -f $(SYSTEM_HEADER_DIR)/float.h ] && \
2948 if grep 'ifndef _FLOAT_H___' $(SYSTEM_HEADER_DIR)/float.h >/dev/null; \
2949 then false; \
2950 else :; fi
2951# We pretend to not having a usable <float.h>, hence disable the FLOAT_H_TEST
2952# to ensure, we're emitting a full blown <float.h> ourselves.
2953FLOAT_H_TEST = false
2954
2955# Used to compile enquire with standard cc, but have forgotten why.
2956# Let's try with GCC.
2957enquire: enquire.o $(GCC_PARTS)
2958 $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ENQUIRE_LDFLAGS) enquire.o -o $@
2959enquire.o: $(srcdir)/enquire.c $(GCC_PASSES) stmp-int-hdrs
2960 if $(FLOAT_H_TEST); then \
2961 rm -f include/float.h; \
2962 SYS_FLOAT_H_WRAP=1; \
2963 else :; \
2964 SYS_FLOAT_H_WRAP=0; \
2965 fi; \
2966 $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) $(ENQUIRE_CFLAGS) \
2967 -DSYS_FLOAT_H_WRAP=$$SYS_FLOAT_H_WRAP \
2968 -I. -c $(srcdir)/enquire.c
2969
2970# Create float.h source for the native machine.
2971# Make it empty if we can use the system float.h without changes.
2972float.h-nat: enquire
2973 -./enquire -f > tmp-float.h
2974 grep '#define [^_]' tmp-float.h >/dev/null || true > tmp-float.h
2975 mv tmp-float.h float.h-nat
2976
2977# Create a dummy float.h source for a cross-compiler.
2978# ??? This isn't used anymore. Should we create config/float-unkn.h
2979# and make that the default float_format in configure?
2980float.h-cross:
2981 echo "#ifndef __GCC_FLOAT_NOT_NEEDED" > t-float.h-cross
2982 echo "#error float.h values not known for cross-compiler" >> t-float.h-cross
2983 echo "#endif" >> t-float.h-cross
2984 mv t-float.h-cross float.h-cross
2985