1if [ ! "$_VARIABLE_SUBR" ]; then _VARIABLE_SUBR=1
2#
| 1if [ ! "$_VARIABLE_SUBR" ]; then _VARIABLE_SUBR=1
2#
|
3# Copyright (c) 2012-2013 Devin Teske
| 3# Copyright (c) 2012-2014 Devin Teske
|
4# All rights reserved.
5#
6# Redistribution and use in source and binary forms, with or without
7# modification, are permitted provided that the following conditions
8# are met:
9# 1. Redistributions of source code must retain the above copyright
10# notice, this list of conditions and the following disclaimer.
11# 2. Redistributions in binary form must reproduce the above copyright
12# notice, this list of conditions and the following disclaimer in the
13# documentation and/or other materials provided with the distribution.
14#
15# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
25# SUCH DAMAGE.
26#
| 4# All rights reserved.
5#
6# Redistribution and use in source and binary forms, with or without
7# modification, are permitted provided that the following conditions
8# are met:
9# 1. Redistributions of source code must retain the above copyright
10# notice, this list of conditions and the following disclaimer.
11# 2. Redistributions in binary form must reproduce the above copyright
12# notice, this list of conditions and the following disclaimer in the
13# documentation and/or other materials provided with the distribution.
14#
15# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
25# SUCH DAMAGE.
26#
|
27# $FreeBSD: stable/10/usr.sbin/bsdconfig/share/variable.subr 260675 2014-01-15 07:36:34Z dteske $
| 27# $FreeBSD: stable/10/usr.sbin/bsdconfig/share/variable.subr 263980 2014-04-01 00:19:13Z dteske $
|
28#
29############################################################ INCLUDES
30
31BSDCFG_SHARE="/usr/share/bsdconfig"
32. $BSDCFG_SHARE/common.subr || exit 1
33f_dprintf "%s: loading includes..." variable.subr
34f_include $BSDCFG_SHARE/dialog.subr
35f_include $BSDCFG_SHARE/strings.subr
36
37############################################################ GLOBALS
38
39VARIABLES=
40
41#
42# Default behavior is to call f_variable_set_defaults() when loaded.
43#
44: ${VARIABLE_SELF_INITIALIZE=1}
45
46#
47# File to write when f_dump_variables() is called.
48#
49: ${VARIABLE_DUMPFILE:=/etc/bsdconfig.vars}
50
51############################################################ FUNCTIONS
52
53# f_variable_new $handle $variable
54#
55# Register a new variable named $variable with the given reference-handle
56# $handle. The environment variable $handle is set to $variable allowing you to
57# use the f_getvar() function (from common.subr) with $handle to get the value
58# of environment variable $variable. For example:
59#
60# f_variable_new VAR_ABC abc
61#
62# allows the later indirection:
63#
64# f_getvar $VAR_ABC
65#
66# to return the value of environment variable `abc'. Variables registered in
67# this manner are recorded in the $VARIABLES environment variable for later
68# allowing dynamic enumeration of so-called `registered/advertised' variables.
69#
70f_variable_new()
71{
72 local handle="$1" variable="$2"
73 [ "$handle" ] || return $FAILURE
74 f_dprintf "variable.subr: New variable %s -> %s" "$handle" "$variable"
75 setvar $handle $variable
76 VARIABLES="$VARIABLES${VARIABLES:+ }$handle"
77}
78
79# f_variable_get_value $var [ $fmt [ $opts ... ] ]
80#
81# Unless nonInteractive is set, prompt the user with a given value (pre-filled
82# with the value of $var) and give them the chance to change the value.
83#
84# Unlike f_getvar() (from common.subr) which can return a variable to the
85# caller on standard output, this function has no [meaningful] output.
86#
87# Returns success unless $var is either NULL or missing.
88#
89f_variable_get_value()
90{
91 local var="$1" cp
92
93 [ "$var" ] || return $FAILURE
94
95 if ! { f_getvar $var cp && ! f_interactive; }; then
96 shift 1 # var
97 f_dialog_input cp "$( printf "$@" )" "$cp" && setvar $var "$cp"
98 fi
99
100 return $SUCCESS
101}
102
103# f_variable_set_defaults
104#
105# Installs sensible defaults for registered/advertised variables.
106#
107f_variable_set_defaults()
108{
109 f_dprintf "f_variable_set_defaults: Initializing defaults..."
110
111 #
112 # Initialize various user-edittable values to their defaults
113 #
114 setvar $VAR_EDITOR "${EDITOR:-/usr/bin/ee}"
115 setvar $VAR_FTP_STATE "auto"
116 setvar $VAR_FTP_USER "ftp"
117 setvar $VAR_HOSTNAME "$( hostname )"
118 setvar $VAR_MEDIA_TIMEOUT "300"
119 setvar $VAR_NFS_SECURE "NO"
120 setvar $VAR_NFS_TCP "NO"
121 setvar $VAR_NFS_V3 "YES"
122 setvar $VAR_PKG_TMPDIR "/var/tmp"
123 setvar $VAR_RELNAME "$UNAME_R"
124
125 #
126 # Debugging
127 #
128 if f_debugging; then
129 local var
130 for var in \
131 $VAR_EDITOR \
132 $VAR_FTP_STATE \
133 $VAR_FTP_USER \
134 $VAR_HOSTNAME \
135 $VAR_MEDIA_TIMEOUT \
136 $VAR_NFS_SECURE \
137 $VAR_NFS_TCP \
138 $VAR_NFS_V3 \
139 $VAR_PKG_TMPDIR \
140 $VAR_RELNAME \
141 ; do
142 f_quietly f_getvar $var
143 done
144 fi
145
146 f_dprintf "f_variable_set_defaults: Defaults initialized."
147}
148
149# f_dump_variables
150#
151# Dump a list of registered/advertised variables and their respective values to
152# $VARIABLE_DUMPFILE. Returns success unless the file couldn't be written. If
153# an error occurs, it is displayed using f_dialog_msgbox() (from dialog.subr).
154#
155f_dump_variables()
156{
157 local err
158 if ! err=$(
159 ( for handle in $VARIABLES; do
160 f_getvar $handle var || continue
161 f_getvar $var value || continue
162 f_shell_escape "$value" value
163 printf "%s='%s'\n" "$var" "$value"
164 done > "$VARIABLE_DUMPFILE" ) 2>&1
165 ); then
166 f_dialog_msgbox "$err"
167 return $FAILURE
168 fi
169}
170
171# f_debugging
172#
173# Are we in debug mode? Returns success if extra DEBUG information has been
174# requested (by setting $debug to non-NULL), otherwise false.
175#
176f_debugging()
177{
178 local value
179 f_getvar $VAR_DEBUG value && [ "$value" ]
180}
181
182# f_interactive
183#
184# Are we running interactively? Return error if $nonInteractive is set and non-
185# NULL, otherwise return success.
186#
187f_interactive()
188{
189 local value
190 ! f_getvar $VAR_NONINTERACTIVE value || [ ! "$value" ]
191}
192
193# f_netinteractive
194#
195# Has the user specifically requested the network-portion of configuration and
196# setup to be performed interactively? Returns success if the user has asked
197# for the network configuration to be done interactively even if perhaps over-
198# all non-interactive mode has been requested (by setting nonInteractive).
199#
200# Returns success if $netInteractive is set and non-NULL.
201#
202f_netinteractive()
203{
204 local value
205 f_getvar $VAR_NETINTERACTIVE value && [ "$value" ]
206}
207
208# f_zfsinteractive
209#
210# Has the user specifically requested the ZFS-portion of configuration and
211# setup to be performed interactively? Returns success if the user has asked
212# for the ZFS configuration to be done interactively even if perhaps overall
213# non-interactive mode has been requested (by setting nonInteractive).
214#
215# Returns success if $zfsInteractive is set and non-NULL.
216#
217f_zfsinteractive()
218{
219 local value
220 f_getvar $VAR_ZFSINTERACTIVE value && [ "$value" ]
221}
222
223############################################################ MAIN
224
225#
226# Variables that can be tweaked from config files
227#
228# Handle Variable Name
229f_variable_new VAR_CONFIG_FILE configFile
230f_variable_new VAR_DEBUG debug
231f_variable_new VAR_DEBUG_FILE debugFile
232f_variable_new VAR_DIRECTORY_PATH _directoryPath
233f_variable_new VAR_DOMAINNAME domainname
234f_variable_new VAR_EDITOR editor
235f_variable_new VAR_EXTRAS ifconfig_
236f_variable_new VAR_FTP_DIR ftpDirectory
237f_variable_new VAR_FTP_HOST ftpHost
238f_variable_new VAR_FTP_PASS ftpPass
239f_variable_new VAR_FTP_PATH _ftpPath
240f_variable_new VAR_FTP_PORT ftpPort
241f_variable_new VAR_FTP_STATE ftpState
242f_variable_new VAR_FTP_USER ftpUser
243f_variable_new VAR_GATEWAY defaultrouter
| 28#
29############################################################ INCLUDES
30
31BSDCFG_SHARE="/usr/share/bsdconfig"
32. $BSDCFG_SHARE/common.subr || exit 1
33f_dprintf "%s: loading includes..." variable.subr
34f_include $BSDCFG_SHARE/dialog.subr
35f_include $BSDCFG_SHARE/strings.subr
36
37############################################################ GLOBALS
38
39VARIABLES=
40
41#
42# Default behavior is to call f_variable_set_defaults() when loaded.
43#
44: ${VARIABLE_SELF_INITIALIZE=1}
45
46#
47# File to write when f_dump_variables() is called.
48#
49: ${VARIABLE_DUMPFILE:=/etc/bsdconfig.vars}
50
51############################################################ FUNCTIONS
52
53# f_variable_new $handle $variable
54#
55# Register a new variable named $variable with the given reference-handle
56# $handle. The environment variable $handle is set to $variable allowing you to
57# use the f_getvar() function (from common.subr) with $handle to get the value
58# of environment variable $variable. For example:
59#
60# f_variable_new VAR_ABC abc
61#
62# allows the later indirection:
63#
64# f_getvar $VAR_ABC
65#
66# to return the value of environment variable `abc'. Variables registered in
67# this manner are recorded in the $VARIABLES environment variable for later
68# allowing dynamic enumeration of so-called `registered/advertised' variables.
69#
70f_variable_new()
71{
72 local handle="$1" variable="$2"
73 [ "$handle" ] || return $FAILURE
74 f_dprintf "variable.subr: New variable %s -> %s" "$handle" "$variable"
75 setvar $handle $variable
76 VARIABLES="$VARIABLES${VARIABLES:+ }$handle"
77}
78
79# f_variable_get_value $var [ $fmt [ $opts ... ] ]
80#
81# Unless nonInteractive is set, prompt the user with a given value (pre-filled
82# with the value of $var) and give them the chance to change the value.
83#
84# Unlike f_getvar() (from common.subr) which can return a variable to the
85# caller on standard output, this function has no [meaningful] output.
86#
87# Returns success unless $var is either NULL or missing.
88#
89f_variable_get_value()
90{
91 local var="$1" cp
92
93 [ "$var" ] || return $FAILURE
94
95 if ! { f_getvar $var cp && ! f_interactive; }; then
96 shift 1 # var
97 f_dialog_input cp "$( printf "$@" )" "$cp" && setvar $var "$cp"
98 fi
99
100 return $SUCCESS
101}
102
103# f_variable_set_defaults
104#
105# Installs sensible defaults for registered/advertised variables.
106#
107f_variable_set_defaults()
108{
109 f_dprintf "f_variable_set_defaults: Initializing defaults..."
110
111 #
112 # Initialize various user-edittable values to their defaults
113 #
114 setvar $VAR_EDITOR "${EDITOR:-/usr/bin/ee}"
115 setvar $VAR_FTP_STATE "auto"
116 setvar $VAR_FTP_USER "ftp"
117 setvar $VAR_HOSTNAME "$( hostname )"
118 setvar $VAR_MEDIA_TIMEOUT "300"
119 setvar $VAR_NFS_SECURE "NO"
120 setvar $VAR_NFS_TCP "NO"
121 setvar $VAR_NFS_V3 "YES"
122 setvar $VAR_PKG_TMPDIR "/var/tmp"
123 setvar $VAR_RELNAME "$UNAME_R"
124
125 #
126 # Debugging
127 #
128 if f_debugging; then
129 local var
130 for var in \
131 $VAR_EDITOR \
132 $VAR_FTP_STATE \
133 $VAR_FTP_USER \
134 $VAR_HOSTNAME \
135 $VAR_MEDIA_TIMEOUT \
136 $VAR_NFS_SECURE \
137 $VAR_NFS_TCP \
138 $VAR_NFS_V3 \
139 $VAR_PKG_TMPDIR \
140 $VAR_RELNAME \
141 ; do
142 f_quietly f_getvar $var
143 done
144 fi
145
146 f_dprintf "f_variable_set_defaults: Defaults initialized."
147}
148
149# f_dump_variables
150#
151# Dump a list of registered/advertised variables and their respective values to
152# $VARIABLE_DUMPFILE. Returns success unless the file couldn't be written. If
153# an error occurs, it is displayed using f_dialog_msgbox() (from dialog.subr).
154#
155f_dump_variables()
156{
157 local err
158 if ! err=$(
159 ( for handle in $VARIABLES; do
160 f_getvar $handle var || continue
161 f_getvar $var value || continue
162 f_shell_escape "$value" value
163 printf "%s='%s'\n" "$var" "$value"
164 done > "$VARIABLE_DUMPFILE" ) 2>&1
165 ); then
166 f_dialog_msgbox "$err"
167 return $FAILURE
168 fi
169}
170
171# f_debugging
172#
173# Are we in debug mode? Returns success if extra DEBUG information has been
174# requested (by setting $debug to non-NULL), otherwise false.
175#
176f_debugging()
177{
178 local value
179 f_getvar $VAR_DEBUG value && [ "$value" ]
180}
181
182# f_interactive
183#
184# Are we running interactively? Return error if $nonInteractive is set and non-
185# NULL, otherwise return success.
186#
187f_interactive()
188{
189 local value
190 ! f_getvar $VAR_NONINTERACTIVE value || [ ! "$value" ]
191}
192
193# f_netinteractive
194#
195# Has the user specifically requested the network-portion of configuration and
196# setup to be performed interactively? Returns success if the user has asked
197# for the network configuration to be done interactively even if perhaps over-
198# all non-interactive mode has been requested (by setting nonInteractive).
199#
200# Returns success if $netInteractive is set and non-NULL.
201#
202f_netinteractive()
203{
204 local value
205 f_getvar $VAR_NETINTERACTIVE value && [ "$value" ]
206}
207
208# f_zfsinteractive
209#
210# Has the user specifically requested the ZFS-portion of configuration and
211# setup to be performed interactively? Returns success if the user has asked
212# for the ZFS configuration to be done interactively even if perhaps overall
213# non-interactive mode has been requested (by setting nonInteractive).
214#
215# Returns success if $zfsInteractive is set and non-NULL.
216#
217f_zfsinteractive()
218{
219 local value
220 f_getvar $VAR_ZFSINTERACTIVE value && [ "$value" ]
221}
222
223############################################################ MAIN
224
225#
226# Variables that can be tweaked from config files
227#
228# Handle Variable Name
229f_variable_new VAR_CONFIG_FILE configFile
230f_variable_new VAR_DEBUG debug
231f_variable_new VAR_DEBUG_FILE debugFile
232f_variable_new VAR_DIRECTORY_PATH _directoryPath
233f_variable_new VAR_DOMAINNAME domainname
234f_variable_new VAR_EDITOR editor
235f_variable_new VAR_EXTRAS ifconfig_
236f_variable_new VAR_FTP_DIR ftpDirectory
237f_variable_new VAR_FTP_HOST ftpHost
238f_variable_new VAR_FTP_PASS ftpPass
239f_variable_new VAR_FTP_PATH _ftpPath
240f_variable_new VAR_FTP_PORT ftpPort
241f_variable_new VAR_FTP_STATE ftpState
242f_variable_new VAR_FTP_USER ftpUser
243f_variable_new VAR_GATEWAY defaultrouter
|
| 244f_variable_new VAR_GROUP group
245f_variable_new VAR_GROUP_GID groupGid
246f_variable_new VAR_GROUP_MEMBERS groupMembers
247f_variable_new VAR_GROUP_PASSWORD groupPassword
|
244f_variable_new VAR_HOSTNAME hostname
245f_variable_new VAR_HTTP_DIR httpDirectory
246f_variable_new VAR_HTTP_FTP_MODE httpFtpMode
247f_variable_new VAR_HTTP_HOST httpHost
248f_variable_new VAR_HTTP_PATH _httpPath
249f_variable_new VAR_HTTP_PORT httpPort
250f_variable_new VAR_HTTP_PROXY httpProxy
251f_variable_new VAR_HTTP_PROXY_HOST httpProxyHost
252f_variable_new VAR_HTTP_PROXY_PATH _httpProxyPath
253f_variable_new VAR_HTTP_PROXY_PORT httpProxyPort
254f_variable_new VAR_IFCONFIG ifconfig_
255f_variable_new VAR_IPADDR ipaddr
256f_variable_new VAR_IPV6ADDR ipv6addr
257f_variable_new VAR_IPV6_ENABLE ipv6_activate_all_interfaces
258f_variable_new VAR_KEYMAP keymap
259f_variable_new VAR_MEDIA_TIMEOUT MEDIA_TIMEOUT
260f_variable_new VAR_MEDIA_TYPE mediaType
261f_variable_new VAR_NAMESERVER nameserver
262f_variable_new VAR_NETINTERACTIVE netInteractive
263f_variable_new VAR_NETMASK netmask
264f_variable_new VAR_NETWORK_DEVICE netDev
265f_variable_new VAR_NFS_HOST nfsHost
266f_variable_new VAR_NFS_PATH nfsPath
267f_variable_new VAR_NFS_SECURE nfs_reserved_port_only
268f_variable_new VAR_NFS_TCP nfs_use_tcp
269f_variable_new VAR_NFS_V3 nfs_use_v3
270f_variable_new VAR_NONINTERACTIVE nonInteractive
271f_variable_new VAR_NO_CONFIRM noConfirm
272f_variable_new VAR_NO_ERROR noError
273f_variable_new VAR_NO_INET6 noInet6
274f_variable_new VAR_PACKAGE package
275f_variable_new VAR_PKG_TMPDIR PKG_TMPDIR
276f_variable_new VAR_PORTS_PATH ports
277f_variable_new VAR_RELNAME releaseName
278f_variable_new VAR_SLOW_ETHER slowEthernetCard
279f_variable_new VAR_TRY_DHCP tryDHCP
280f_variable_new VAR_TRY_RTSOL tryRTSOL
281f_variable_new VAR_UFS_PATH ufs
| 248f_variable_new VAR_HOSTNAME hostname
249f_variable_new VAR_HTTP_DIR httpDirectory
250f_variable_new VAR_HTTP_FTP_MODE httpFtpMode
251f_variable_new VAR_HTTP_HOST httpHost
252f_variable_new VAR_HTTP_PATH _httpPath
253f_variable_new VAR_HTTP_PORT httpPort
254f_variable_new VAR_HTTP_PROXY httpProxy
255f_variable_new VAR_HTTP_PROXY_HOST httpProxyHost
256f_variable_new VAR_HTTP_PROXY_PATH _httpProxyPath
257f_variable_new VAR_HTTP_PROXY_PORT httpProxyPort
258f_variable_new VAR_IFCONFIG ifconfig_
259f_variable_new VAR_IPADDR ipaddr
260f_variable_new VAR_IPV6ADDR ipv6addr
261f_variable_new VAR_IPV6_ENABLE ipv6_activate_all_interfaces
262f_variable_new VAR_KEYMAP keymap
263f_variable_new VAR_MEDIA_TIMEOUT MEDIA_TIMEOUT
264f_variable_new VAR_MEDIA_TYPE mediaType
265f_variable_new VAR_NAMESERVER nameserver
266f_variable_new VAR_NETINTERACTIVE netInteractive
267f_variable_new VAR_NETMASK netmask
268f_variable_new VAR_NETWORK_DEVICE netDev
269f_variable_new VAR_NFS_HOST nfsHost
270f_variable_new VAR_NFS_PATH nfsPath
271f_variable_new VAR_NFS_SECURE nfs_reserved_port_only
272f_variable_new VAR_NFS_TCP nfs_use_tcp
273f_variable_new VAR_NFS_V3 nfs_use_v3
274f_variable_new VAR_NONINTERACTIVE nonInteractive
275f_variable_new VAR_NO_CONFIRM noConfirm
276f_variable_new VAR_NO_ERROR noError
277f_variable_new VAR_NO_INET6 noInet6
278f_variable_new VAR_PACKAGE package
279f_variable_new VAR_PKG_TMPDIR PKG_TMPDIR
280f_variable_new VAR_PORTS_PATH ports
281f_variable_new VAR_RELNAME releaseName
282f_variable_new VAR_SLOW_ETHER slowEthernetCard
283f_variable_new VAR_TRY_DHCP tryDHCP
284f_variable_new VAR_TRY_RTSOL tryRTSOL
285f_variable_new VAR_UFS_PATH ufs
|
| 286f_variable_new VAR_USER user
287f_variable_new VAR_USER_ACCOUNT_EXPIRE userAccountExpire
288f_variable_new VAR_USER_DOTFILES_CREATE userDotfilesCreate
289f_variable_new VAR_USER_GECOS userGecos
290f_variable_new VAR_USER_GID userGid
291f_variable_new VAR_USER_GROUPS userGroups
292f_variable_new VAR_USER_GROUP_DELETE userGroupDelete
293f_variable_new VAR_USER_HOME userHome
294f_variable_new VAR_USER_HOME_CREATE userHomeCreate
295f_variable_new VAR_USER_HOME_DELETE userHomeDelete
296f_variable_new VAR_USER_LOGIN_CLASS userLoginClass
297f_variable_new VAR_USER_PASSWORD userPassword
298f_variable_new VAR_USER_PASSWORD_EXPIRE userPasswordExpire
299f_variable_new VAR_USER_SHELL userShell
300f_variable_new VAR_USER_UID userUid
|
282f_variable_new VAR_ZFSINTERACTIVE zfsInteractive
283
284#
285# Self-initialize unless requested otherwise
286#
287f_dprintf "%s: VARIABLE_SELF_INITIALIZE=[%s]" \
288 variable.subr "$VARIABLE_SELF_INITIALIZE"
289case "$VARIABLE_SELF_INITIALIZE" in
290""|0|[Nn][Oo]|[Oo][Ff][Ff]|[Ff][Aa][Ll][Ss][Ee]) : do nothing ;;
291*) f_variable_set_defaults
292esac
293
294f_dprintf "%s: Successfully loaded." variable.subr
295
296fi # ! $_VARIABLE_SUBR
| 301f_variable_new VAR_ZFSINTERACTIVE zfsInteractive
302
303#
304# Self-initialize unless requested otherwise
305#
306f_dprintf "%s: VARIABLE_SELF_INITIALIZE=[%s]" \
307 variable.subr "$VARIABLE_SELF_INITIALIZE"
308case "$VARIABLE_SELF_INITIALIZE" in
309""|0|[Nn][Oo]|[Oo][Ff][Ff]|[Ff][Aa][Ll][Ss][Ee]) : do nothing ;;
310*) f_variable_set_defaults
311esac
312
313f_dprintf "%s: Successfully loaded." variable.subr
314
315fi # ! $_VARIABLE_SUBR
|