2/*- 3 * Copyright (c) 2008 Hans Petter Selasky. All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24 * SUCH DAMAGE. 25 */ 26 27#include <sys/stdint.h> 28#include <sys/stddef.h> 29#include <sys/param.h> 30#include <sys/queue.h> 31#include <sys/types.h> 32#include <sys/systm.h> 33#include <sys/kernel.h> 34#include <sys/bus.h> 35#include <sys/module.h> 36#include <sys/lock.h> 37#include <sys/mutex.h> 38#include <sys/condvar.h> 39#include <sys/sysctl.h> 40#include <sys/sx.h> 41#include <sys/unistd.h> 42#include <sys/callout.h> 43#include <sys/malloc.h> 44#include <sys/priv.h> 45 46#include <dev/usb/usb.h> 47#include <dev/usb/usbdi.h> 48#include <dev/usb/usbdi_util.h> 49 50#define USB_DEBUG_VAR usb_debug 51 52#include <dev/usb/usb_core.h> 53#include <dev/usb/usb_busdma.h> 54#include <dev/usb/usb_process.h> 55#include <dev/usb/usb_transfer.h> 56#include <dev/usb/usb_device.h> 57#include <dev/usb/usb_debug.h> 58#include <dev/usb/usb_util.h> 59 60#include <dev/usb/usb_controller.h> 61#include <dev/usb/usb_bus.h> 62#include <dev/usb/usb_pf.h> 63 64struct usb_std_packet_size { 65 struct { 66 uint16_t min; /* inclusive */ 67 uint16_t max; /* inclusive */ 68 } range; 69 70 uint16_t fixed[4]; 71}; 72 73static usb_callback_t usb_request_callback; 74 75static const struct usb_config usb_control_ep_cfg[USB_CTRL_XFER_MAX] = { 76 77 /* This transfer is used for generic control endpoint transfers */ 78 79 [0] = { 80 .type = UE_CONTROL, 81 .endpoint = 0x00, /* Control endpoint */ 82 .direction = UE_DIR_ANY, 83 .bufsize = USB_EP0_BUFSIZE, /* bytes */ 84 .flags = {.proxy_buffer = 1,}, 85 .callback = &usb_request_callback, 86 .usb_mode = USB_MODE_DUAL, /* both modes */ 87 }, 88 89 /* This transfer is used for generic clear stall only */ 90 91 [1] = { 92 .type = UE_CONTROL, 93 .endpoint = 0x00, /* Control pipe */ 94 .direction = UE_DIR_ANY, 95 .bufsize = sizeof(struct usb_device_request), 96 .callback = &usb_do_clear_stall_callback, 97 .timeout = 1000, /* 1 second */ 98 .interval = 50, /* 50ms */ 99 .usb_mode = USB_MODE_HOST, 100 }, 101}; 102 103/* function prototypes */ 104 105static void usbd_update_max_frame_size(struct usb_xfer *); 106static void usbd_transfer_unsetup_sub(struct usb_xfer_root *, uint8_t); 107static void usbd_control_transfer_init(struct usb_xfer *); 108static int usbd_setup_ctrl_transfer(struct usb_xfer *); 109static void usb_callback_proc(struct usb_proc_msg *); 110static void usbd_callback_ss_done_defer(struct usb_xfer *); 111static void usbd_callback_wrapper(struct usb_xfer_queue *); 112static void usbd_transfer_start_cb(void *); 113static uint8_t usbd_callback_wrapper_sub(struct usb_xfer *); 114static void usbd_get_std_packet_size(struct usb_std_packet_size *ptr, 115 uint8_t type, enum usb_dev_speed speed); 116 117/*------------------------------------------------------------------------* 118 * usb_request_callback 119 *------------------------------------------------------------------------*/ 120static void 121usb_request_callback(struct usb_xfer *xfer, usb_error_t error) 122{ 123 if (xfer->flags_int.usb_mode == USB_MODE_DEVICE) 124 usb_handle_request_callback(xfer, error); 125 else 126 usbd_do_request_callback(xfer, error); 127} 128 129/*------------------------------------------------------------------------* 130 * usbd_update_max_frame_size 131 * 132 * This function updates the maximum frame size, hence high speed USB 133 * can transfer multiple consecutive packets. 134 *------------------------------------------------------------------------*/ 135static void 136usbd_update_max_frame_size(struct usb_xfer *xfer) 137{ 138 /* compute maximum frame size */ 139 /* this computation should not overflow 16-bit */ 140 /* max = 15 * 1024 */ 141 142 xfer->max_frame_size = xfer->max_packet_size * xfer->max_packet_count; 143} 144 145/*------------------------------------------------------------------------* 146 * usbd_get_dma_delay 147 * 148 * The following function is called when we need to 149 * synchronize with DMA hardware. 150 * 151 * Returns: 152 * 0: no DMA delay required 153 * Else: milliseconds of DMA delay 154 *------------------------------------------------------------------------*/ 155usb_timeout_t 156usbd_get_dma_delay(struct usb_device *udev) 157{ 158 struct usb_bus_methods *mtod; 159 uint32_t temp; 160 161 mtod = udev->bus->methods; 162 temp = 0; 163 164 if (mtod->get_dma_delay) { 165 (mtod->get_dma_delay) (udev, &temp); 166 /* 167 * Round up and convert to milliseconds. Note that we use 168 * 1024 milliseconds per second. to save a division. 169 */ 170 temp += 0x3FF; 171 temp /= 0x400; 172 } 173 return (temp); 174} 175 176/*------------------------------------------------------------------------* 177 * usbd_transfer_setup_sub_malloc 178 * 179 * This function will allocate one or more DMA'able memory chunks 180 * according to "size", "align" and "count" arguments. "ppc" is 181 * pointed to a linear array of USB page caches afterwards. 182 * 183 * Returns: 184 * 0: Success 185 * Else: Failure 186 *------------------------------------------------------------------------*/ 187#if USB_HAVE_BUSDMA 188uint8_t 189usbd_transfer_setup_sub_malloc(struct usb_setup_params *parm, 190 struct usb_page_cache **ppc, usb_size_t size, usb_size_t align, 191 usb_size_t count) 192{ 193 struct usb_page_cache *pc; 194 struct usb_page *pg; 195 void *buf; 196 usb_size_t n_dma_pc; 197 usb_size_t n_obj; 198 usb_size_t x; 199 usb_size_t y; 200 usb_size_t r; 201 usb_size_t z; 202 203 USB_ASSERT(align > 1, ("Invalid alignment, 0x%08x\n", 204 align)); 205 USB_ASSERT(size > 0, ("Invalid size = 0\n")); 206 207 if (count == 0) { 208 return (0); /* nothing to allocate */ 209 } 210 /* 211 * Make sure that the size is aligned properly. 212 */ 213 size = -((-size) & (-align)); 214 215 /* 216 * Try multi-allocation chunks to reduce the number of DMA 217 * allocations, hence DMA allocations are slow. 218 */ 219 if (size >= PAGE_SIZE) { 220 n_dma_pc = count; 221 n_obj = 1; 222 } else { 223 /* compute number of objects per page */ 224 n_obj = (PAGE_SIZE / size); 225 /* 226 * Compute number of DMA chunks, rounded up 227 * to nearest one: 228 */ 229 n_dma_pc = ((count + n_obj - 1) / n_obj); 230 } 231 232 if (parm->buf == NULL) { 233 /* for the future */ 234 parm->dma_page_ptr += n_dma_pc; 235 parm->dma_page_cache_ptr += n_dma_pc; 236 parm->dma_page_ptr += count; 237 parm->xfer_page_cache_ptr += count; 238 return (0); 239 } 240 for (x = 0; x != n_dma_pc; x++) { 241 /* need to initialize the page cache */ 242 parm->dma_page_cache_ptr[x].tag_parent = 243 &parm->curr_xfer->xroot->dma_parent_tag; 244 } 245 for (x = 0; x != count; x++) { 246 /* need to initialize the page cache */ 247 parm->xfer_page_cache_ptr[x].tag_parent = 248 &parm->curr_xfer->xroot->dma_parent_tag; 249 } 250 251 if (ppc) { 252 *ppc = parm->xfer_page_cache_ptr; 253 } 254 r = count; /* set remainder count */ 255 z = n_obj * size; /* set allocation size */ 256 pc = parm->xfer_page_cache_ptr; 257 pg = parm->dma_page_ptr; 258 259 for (x = 0; x != n_dma_pc; x++) { 260 261 if (r < n_obj) { 262 /* compute last remainder */ 263 z = r * size; 264 n_obj = r; 265 } 266 if (usb_pc_alloc_mem(parm->dma_page_cache_ptr, 267 pg, z, align)) { 268 return (1); /* failure */ 269 } 270 /* Set beginning of current buffer */ 271 buf = parm->dma_page_cache_ptr->buffer; 272 /* Make room for one DMA page cache and one page */ 273 parm->dma_page_cache_ptr++; 274 pg++; 275 276 for (y = 0; (y != n_obj); y++, r--, pc++, pg++) { 277 278 /* Load sub-chunk into DMA */ 279 if (usb_pc_dmamap_create(pc, size)) { 280 return (1); /* failure */ 281 } 282 pc->buffer = USB_ADD_BYTES(buf, y * size); 283 pc->page_start = pg; 284 285 mtx_lock(pc->tag_parent->mtx); 286 if (usb_pc_load_mem(pc, size, 1 /* synchronous */ )) { 287 mtx_unlock(pc->tag_parent->mtx); 288 return (1); /* failure */ 289 } 290 mtx_unlock(pc->tag_parent->mtx); 291 } 292 } 293 294 parm->xfer_page_cache_ptr = pc; 295 parm->dma_page_ptr = pg; 296 return (0); 297} 298#endif 299 300/*------------------------------------------------------------------------* 301 * usbd_transfer_setup_sub - transfer setup subroutine 302 * 303 * This function must be called from the "xfer_setup" callback of the 304 * USB Host or Device controller driver when setting up an USB 305 * transfer. This function will setup correct packet sizes, buffer 306 * sizes, flags and more, that are stored in the "usb_xfer" 307 * structure. 308 *------------------------------------------------------------------------*/ 309void 310usbd_transfer_setup_sub(struct usb_setup_params *parm) 311{ 312 enum { 313 REQ_SIZE = 8, 314 MIN_PKT = 8, 315 }; 316 struct usb_xfer *xfer = parm->curr_xfer; 317 const struct usb_config *setup = parm->curr_setup; 318 struct usb_endpoint_ss_comp_descriptor *ecomp; 319 struct usb_endpoint_descriptor *edesc; 320 struct usb_std_packet_size std_size; 321 usb_frcount_t n_frlengths; 322 usb_frcount_t n_frbuffers; 323 usb_frcount_t x; 324 uint8_t type; 325 uint8_t zmps; 326 327 /* 328 * Sanity check. The following parameters must be initialized before 329 * calling this function. 330 */ 331 if ((parm->hc_max_packet_size == 0) || 332 (parm->hc_max_packet_count == 0) || 333 (parm->hc_max_frame_size == 0)) { 334 parm->err = USB_ERR_INVAL; 335 goto done; 336 } 337 edesc = xfer->endpoint->edesc; 338 ecomp = xfer->endpoint->ecomp; 339 340 type = (edesc->bmAttributes & UE_XFERTYPE); 341 342 xfer->flags = setup->flags; 343 xfer->nframes = setup->frames; 344 xfer->timeout = setup->timeout; 345 xfer->callback = setup->callback; 346 xfer->interval = setup->interval; 347 xfer->endpointno = edesc->bEndpointAddress; 348 xfer->max_packet_size = UGETW(edesc->wMaxPacketSize); 349 xfer->max_packet_count = 1; 350 /* make a shadow copy: */ 351 xfer->flags_int.usb_mode = parm->udev->flags.usb_mode; 352 353 parm->bufsize = setup->bufsize; 354 355 switch (parm->speed) { 356 case USB_SPEED_HIGH: 357 switch (type) { 358 case UE_ISOCHRONOUS: 359 case UE_INTERRUPT: 360 xfer->max_packet_count += (xfer->max_packet_size >> 11) & 3; 361 362 /* check for invalid max packet count */ 363 if (xfer->max_packet_count > 3) 364 xfer->max_packet_count = 3; 365 break; 366 default: 367 break; 368 } 369 xfer->max_packet_size &= 0x7FF; 370 break; 371 case USB_SPEED_SUPER: 372 xfer->max_packet_count += (xfer->max_packet_size >> 11) & 3; 373 374 if (ecomp != NULL) 375 xfer->max_packet_count += ecomp->bMaxBurst; 376 377 if ((xfer->max_packet_count == 0) || 378 (xfer->max_packet_count > 16)) 379 xfer->max_packet_count = 16; 380 381 switch (type) { 382 case UE_CONTROL: 383 xfer->max_packet_count = 1; 384 break; 385 case UE_ISOCHRONOUS: 386 if (ecomp != NULL) { 387 uint8_t mult; 388 389 mult = (ecomp->bmAttributes & 3) + 1; 390 if (mult > 3) 391 mult = 3; 392 393 xfer->max_packet_count *= mult; 394 } 395 break; 396 default: 397 break; 398 } 399 xfer->max_packet_size &= 0x7FF; 400 break; 401 default: 402 break; 403 } 404 /* range check "max_packet_count" */ 405 406 if (xfer->max_packet_count > parm->hc_max_packet_count) { 407 xfer->max_packet_count = parm->hc_max_packet_count; 408 } 409 /* filter "wMaxPacketSize" according to HC capabilities */ 410 411 if ((xfer->max_packet_size > parm->hc_max_packet_size) || 412 (xfer->max_packet_size == 0)) { 413 xfer->max_packet_size = parm->hc_max_packet_size; 414 } 415 /* filter "wMaxPacketSize" according to standard sizes */ 416 417 usbd_get_std_packet_size(&std_size, type, parm->speed); 418 419 if (std_size.range.min || std_size.range.max) { 420 421 if (xfer->max_packet_size < std_size.range.min) { 422 xfer->max_packet_size = std_size.range.min; 423 } 424 if (xfer->max_packet_size > std_size.range.max) { 425 xfer->max_packet_size = std_size.range.max; 426 } 427 } else { 428 429 if (xfer->max_packet_size >= std_size.fixed[3]) { 430 xfer->max_packet_size = std_size.fixed[3]; 431 } else if (xfer->max_packet_size >= std_size.fixed[2]) { 432 xfer->max_packet_size = std_size.fixed[2]; 433 } else if (xfer->max_packet_size >= std_size.fixed[1]) { 434 xfer->max_packet_size = std_size.fixed[1]; 435 } else { 436 /* only one possibility left */ 437 xfer->max_packet_size = std_size.fixed[0]; 438 } 439 } 440 441 /* compute "max_frame_size" */ 442 443 usbd_update_max_frame_size(xfer); 444 445 /* check interrupt interval and transfer pre-delay */ 446 447 if (type == UE_ISOCHRONOUS) { 448 449 uint16_t frame_limit; 450 451 xfer->interval = 0; /* not used, must be zero */ 452 xfer->flags_int.isochronous_xfr = 1; /* set flag */ 453 454 if (xfer->timeout == 0) { 455 /* 456 * set a default timeout in 457 * case something goes wrong! 458 */ 459 xfer->timeout = 1000 / 4; 460 } 461 switch (parm->speed) { 462 case USB_SPEED_LOW: 463 case USB_SPEED_FULL: 464 frame_limit = USB_MAX_FS_ISOC_FRAMES_PER_XFER; 465 xfer->fps_shift = 0; 466 break; 467 default: 468 frame_limit = USB_MAX_HS_ISOC_FRAMES_PER_XFER; 469 xfer->fps_shift = edesc->bInterval; 470 if (xfer->fps_shift > 0) 471 xfer->fps_shift--; 472 if (xfer->fps_shift > 3) 473 xfer->fps_shift = 3;
|
476 break; 477 } 478 479 if (xfer->nframes > frame_limit) { 480 /* 481 * this is not going to work 482 * cross hardware 483 */ 484 parm->err = USB_ERR_INVAL; 485 goto done; 486 } 487 if (xfer->nframes == 0) { 488 /* 489 * this is not a valid value 490 */ 491 parm->err = USB_ERR_ZERO_NFRAMES; 492 goto done; 493 } 494 } else { 495 496 /* 497 * If a value is specified use that else check the 498 * endpoint descriptor! 499 */ 500 if (type == UE_INTERRUPT) { 501 502 uint32_t temp; 503 504 if (xfer->interval == 0) { 505 506 xfer->interval = edesc->bInterval; 507 508 switch (parm->speed) { 509 case USB_SPEED_LOW: 510 case USB_SPEED_FULL: 511 break; 512 default: 513 /* 125us -> 1ms */ 514 if (xfer->interval < 4) 515 xfer->interval = 1; 516 else if (xfer->interval > 16) 517 xfer->interval = (1 << (16 - 4)); 518 else 519 xfer->interval = 520 (1 << (xfer->interval - 4)); 521 break; 522 } 523 } 524 525 if (xfer->interval == 0) { 526 /* 527 * One millisecond is the smallest 528 * interval we support: 529 */ 530 xfer->interval = 1; 531 } 532 533 xfer->fps_shift = 0; 534 temp = 1; 535 536 while ((temp != 0) && (temp < xfer->interval)) { 537 xfer->fps_shift++; 538 temp *= 2; 539 } 540 541 switch (parm->speed) { 542 case USB_SPEED_LOW: 543 case USB_SPEED_FULL: 544 break; 545 default: 546 xfer->fps_shift += 3; 547 break; 548 } 549 } 550 } 551 552 /* 553 * NOTE: we do not allow "max_packet_size" or "max_frame_size" 554 * to be equal to zero when setting up USB transfers, hence 555 * this leads to alot of extra code in the USB kernel. 556 */ 557 558 if ((xfer->max_frame_size == 0) || 559 (xfer->max_packet_size == 0)) { 560 561 zmps = 1; 562 563 if ((parm->bufsize <= MIN_PKT) && 564 (type != UE_CONTROL) && 565 (type != UE_BULK)) { 566 567 /* workaround */ 568 xfer->max_packet_size = MIN_PKT; 569 xfer->max_packet_count = 1; 570 parm->bufsize = 0; /* automatic setup length */ 571 usbd_update_max_frame_size(xfer); 572 573 } else { 574 parm->err = USB_ERR_ZERO_MAXP; 575 goto done; 576 } 577 578 } else { 579 zmps = 0; 580 } 581 582 /* 583 * check if we should setup a default 584 * length: 585 */ 586 587 if (parm->bufsize == 0) { 588 589 parm->bufsize = xfer->max_frame_size; 590 591 if (type == UE_ISOCHRONOUS) { 592 parm->bufsize *= xfer->nframes; 593 } 594 } 595 /* 596 * check if we are about to setup a proxy 597 * type of buffer: 598 */ 599 600 if (xfer->flags.proxy_buffer) { 601 602 /* round bufsize up */ 603 604 parm->bufsize += (xfer->max_frame_size - 1); 605 606 if (parm->bufsize < xfer->max_frame_size) { 607 /* length wrapped around */ 608 parm->err = USB_ERR_INVAL; 609 goto done; 610 } 611 /* subtract remainder */ 612 613 parm->bufsize -= (parm->bufsize % xfer->max_frame_size); 614 615 /* add length of USB device request structure, if any */ 616 617 if (type == UE_CONTROL) { 618 parm->bufsize += REQ_SIZE; /* SETUP message */ 619 } 620 } 621 xfer->max_data_length = parm->bufsize; 622 623 /* Setup "n_frlengths" and "n_frbuffers" */ 624 625 if (type == UE_ISOCHRONOUS) { 626 n_frlengths = xfer->nframes; 627 n_frbuffers = 1; 628 } else { 629 630 if (type == UE_CONTROL) { 631 xfer->flags_int.control_xfr = 1; 632 if (xfer->nframes == 0) { 633 if (parm->bufsize <= REQ_SIZE) { 634 /* 635 * there will never be any data 636 * stage 637 */ 638 xfer->nframes = 1; 639 } else { 640 xfer->nframes = 2; 641 } 642 } 643 } else { 644 if (xfer->nframes == 0) { 645 xfer->nframes = 1; 646 } 647 } 648 649 n_frlengths = xfer->nframes; 650 n_frbuffers = xfer->nframes; 651 } 652 653 /* 654 * check if we have room for the 655 * USB device request structure: 656 */ 657 658 if (type == UE_CONTROL) { 659 660 if (xfer->max_data_length < REQ_SIZE) { 661 /* length wrapped around or too small bufsize */ 662 parm->err = USB_ERR_INVAL; 663 goto done; 664 } 665 xfer->max_data_length -= REQ_SIZE; 666 } 667 /* setup "frlengths" */ 668 xfer->frlengths = parm->xfer_length_ptr; 669 parm->xfer_length_ptr += n_frlengths; 670 671 /* setup "frbuffers" */ 672 xfer->frbuffers = parm->xfer_page_cache_ptr; 673 parm->xfer_page_cache_ptr += n_frbuffers; 674 675 /* initialize max frame count */ 676 xfer->max_frame_count = xfer->nframes; 677 678 /* 679 * check if we need to setup 680 * a local buffer: 681 */ 682 683 if (!xfer->flags.ext_buffer) { 684 685 /* align data */ 686 parm->size[0] += ((-parm->size[0]) & (USB_HOST_ALIGN - 1)); 687 688 if (parm->buf) { 689 690 xfer->local_buffer = 691 USB_ADD_BYTES(parm->buf, parm->size[0]); 692 693 usbd_xfer_set_frame_offset(xfer, 0, 0); 694 695 if ((type == UE_CONTROL) && (n_frbuffers > 1)) { 696 usbd_xfer_set_frame_offset(xfer, REQ_SIZE, 1); 697 } 698 } 699 parm->size[0] += parm->bufsize; 700 701 /* align data again */ 702 parm->size[0] += ((-parm->size[0]) & (USB_HOST_ALIGN - 1)); 703 } 704 /* 705 * Compute maximum buffer size 706 */ 707 708 if (parm->bufsize_max < parm->bufsize) { 709 parm->bufsize_max = parm->bufsize; 710 } 711#if USB_HAVE_BUSDMA 712 if (xfer->flags_int.bdma_enable) { 713 /* 714 * Setup "dma_page_ptr". 715 * 716 * Proof for formula below: 717 * 718 * Assume there are three USB frames having length "a", "b" and 719 * "c". These USB frames will at maximum need "z" 720 * "usb_page" structures. "z" is given by: 721 * 722 * z = ((a / USB_PAGE_SIZE) + 2) + ((b / USB_PAGE_SIZE) + 2) + 723 * ((c / USB_PAGE_SIZE) + 2); 724 * 725 * Constraining "a", "b" and "c" like this: 726 * 727 * (a + b + c) <= parm->bufsize 728 * 729 * We know that: 730 * 731 * z <= ((parm->bufsize / USB_PAGE_SIZE) + (3*2)); 732 * 733 * Here is the general formula: 734 */ 735 xfer->dma_page_ptr = parm->dma_page_ptr; 736 parm->dma_page_ptr += (2 * n_frbuffers); 737 parm->dma_page_ptr += (parm->bufsize / USB_PAGE_SIZE); 738 } 739#endif 740 if (zmps) { 741 /* correct maximum data length */ 742 xfer->max_data_length = 0; 743 } 744 /* subtract USB frame remainder from "hc_max_frame_size" */ 745 746 xfer->max_hc_frame_size = 747 (parm->hc_max_frame_size - 748 (parm->hc_max_frame_size % xfer->max_frame_size)); 749 750 if (xfer->max_hc_frame_size == 0) { 751 parm->err = USB_ERR_INVAL; 752 goto done; 753 } 754 755 /* initialize frame buffers */ 756 757 if (parm->buf) { 758 for (x = 0; x != n_frbuffers; x++) { 759 xfer->frbuffers[x].tag_parent = 760 &xfer->xroot->dma_parent_tag; 761#if USB_HAVE_BUSDMA 762 if (xfer->flags_int.bdma_enable && 763 (parm->bufsize_max > 0)) { 764 765 if (usb_pc_dmamap_create( 766 xfer->frbuffers + x, 767 parm->bufsize_max)) { 768 parm->err = USB_ERR_NOMEM; 769 goto done; 770 } 771 } 772#endif 773 } 774 } 775done: 776 if (parm->err) { 777 /* 778 * Set some dummy values so that we avoid division by zero: 779 */ 780 xfer->max_hc_frame_size = 1; 781 xfer->max_frame_size = 1; 782 xfer->max_packet_size = 1; 783 xfer->max_data_length = 0; 784 xfer->nframes = 0; 785 xfer->max_frame_count = 0; 786 } 787} 788 789/*------------------------------------------------------------------------* 790 * usbd_transfer_setup - setup an array of USB transfers 791 * 792 * NOTE: You must always call "usbd_transfer_unsetup" after calling 793 * "usbd_transfer_setup" if success was returned. 794 * 795 * The idea is that the USB device driver should pre-allocate all its 796 * transfers by one call to this function. 797 * 798 * Return values: 799 * 0: Success 800 * Else: Failure 801 *------------------------------------------------------------------------*/ 802usb_error_t 803usbd_transfer_setup(struct usb_device *udev, 804 const uint8_t *ifaces, struct usb_xfer **ppxfer, 805 const struct usb_config *setup_start, uint16_t n_setup, 806 void *priv_sc, struct mtx *xfer_mtx) 807{ 808 struct usb_xfer dummy; 809 struct usb_setup_params parm; 810 const struct usb_config *setup_end = setup_start + n_setup; 811 const struct usb_config *setup; 812 struct usb_endpoint *ep; 813 struct usb_xfer_root *info; 814 struct usb_xfer *xfer; 815 void *buf = NULL; 816 uint16_t n; 817 uint16_t refcount; 818 819 parm.err = 0; 820 refcount = 0; 821 info = NULL; 822 823 WITNESS_WARN(WARN_GIANTOK | WARN_SLEEPOK, NULL, 824 "usbd_transfer_setup can sleep!"); 825 826 /* do some checking first */ 827 828 if (n_setup == 0) { 829 DPRINTFN(6, "setup array has zero length!\n"); 830 return (USB_ERR_INVAL); 831 } 832 if (ifaces == 0) { 833 DPRINTFN(6, "ifaces array is NULL!\n"); 834 return (USB_ERR_INVAL); 835 } 836 if (xfer_mtx == NULL) { 837 DPRINTFN(6, "using global lock\n"); 838 xfer_mtx = &Giant; 839 } 840 /* sanity checks */ 841 for (setup = setup_start, n = 0; 842 setup != setup_end; setup++, n++) { 843 if (setup->bufsize == (usb_frlength_t)-1) { 844 parm.err = USB_ERR_BAD_BUFSIZE; 845 DPRINTF("invalid bufsize\n"); 846 } 847 if (setup->callback == NULL) { 848 parm.err = USB_ERR_NO_CALLBACK; 849 DPRINTF("no callback\n"); 850 } 851 ppxfer[n] = NULL; 852 } 853 854 if (parm.err) { 855 goto done; 856 } 857 bzero(&parm, sizeof(parm)); 858 859 parm.udev = udev; 860 parm.speed = usbd_get_speed(udev); 861 parm.hc_max_packet_count = 1; 862 863 if (parm.speed >= USB_SPEED_MAX) { 864 parm.err = USB_ERR_INVAL; 865 goto done; 866 } 867 /* setup all transfers */ 868 869 while (1) { 870 871 if (buf) { 872 /* 873 * Initialize the "usb_xfer_root" structure, 874 * which is common for all our USB transfers. 875 */ 876 info = USB_ADD_BYTES(buf, 0); 877 878 info->memory_base = buf; 879 info->memory_size = parm.size[0]; 880 881#if USB_HAVE_BUSDMA 882 info->dma_page_cache_start = USB_ADD_BYTES(buf, parm.size[4]); 883 info->dma_page_cache_end = USB_ADD_BYTES(buf, parm.size[5]); 884#endif 885 info->xfer_page_cache_start = USB_ADD_BYTES(buf, parm.size[5]); 886 info->xfer_page_cache_end = USB_ADD_BYTES(buf, parm.size[2]); 887 888 cv_init(&info->cv_drain, "WDRAIN"); 889 890 info->xfer_mtx = xfer_mtx; 891#if USB_HAVE_BUSDMA 892 usb_dma_tag_setup(&info->dma_parent_tag, 893 parm.dma_tag_p, udev->bus->dma_parent_tag[0].tag, 894 xfer_mtx, &usb_bdma_done_event, 32, parm.dma_tag_max); 895#endif 896 897 info->bus = udev->bus; 898 info->udev = udev; 899 900 TAILQ_INIT(&info->done_q.head); 901 info->done_q.command = &usbd_callback_wrapper; 902#if USB_HAVE_BUSDMA 903 TAILQ_INIT(&info->dma_q.head); 904 info->dma_q.command = &usb_bdma_work_loop; 905#endif 906 info->done_m[0].hdr.pm_callback = &usb_callback_proc; 907 info->done_m[0].xroot = info; 908 info->done_m[1].hdr.pm_callback = &usb_callback_proc; 909 info->done_m[1].xroot = info; 910 911 /* 912 * In device side mode control endpoint 913 * requests need to run from a separate 914 * context, else there is a chance of 915 * deadlock! 916 */ 917 if (setup_start == usb_control_ep_cfg) 918 info->done_p = 919 &udev->bus->control_xfer_proc; 920 else if (xfer_mtx == &Giant) 921 info->done_p = 922 &udev->bus->giant_callback_proc; 923 else 924 info->done_p = 925 &udev->bus->non_giant_callback_proc; 926 } 927 /* reset sizes */ 928 929 parm.size[0] = 0; 930 parm.buf = buf; 931 parm.size[0] += sizeof(info[0]); 932 933 for (setup = setup_start, n = 0; 934 setup != setup_end; setup++, n++) { 935 936 /* skip USB transfers without callbacks: */ 937 if (setup->callback == NULL) { 938 continue; 939 } 940 /* see if there is a matching endpoint */ 941 ep = usbd_get_endpoint(udev, 942 ifaces[setup->if_index], setup); 943 944 if ((ep == NULL) || (ep->methods == NULL)) { 945 if (setup->flags.no_pipe_ok) 946 continue; 947 if ((setup->usb_mode != USB_MODE_DUAL) && 948 (setup->usb_mode != udev->flags.usb_mode)) 949 continue; 950 parm.err = USB_ERR_NO_PIPE; 951 goto done; 952 } 953 954 /* align data properly */ 955 parm.size[0] += ((-parm.size[0]) & (USB_HOST_ALIGN - 1)); 956 957 /* store current setup pointer */ 958 parm.curr_setup = setup; 959 960 if (buf) { 961 /* 962 * Common initialization of the 963 * "usb_xfer" structure. 964 */ 965 xfer = USB_ADD_BYTES(buf, parm.size[0]); 966 xfer->address = udev->address; 967 xfer->priv_sc = priv_sc; 968 xfer->xroot = info; 969 970 usb_callout_init_mtx(&xfer->timeout_handle, 971 &udev->bus->bus_mtx, 0); 972 } else { 973 /* 974 * Setup a dummy xfer, hence we are 975 * writing to the "usb_xfer" 976 * structure pointed to by "xfer" 977 * before we have allocated any 978 * memory: 979 */ 980 xfer = &dummy; 981 bzero(&dummy, sizeof(dummy)); 982 refcount++; 983 } 984 985 /* set transfer endpoint pointer */ 986 xfer->endpoint = ep; 987 988 parm.size[0] += sizeof(xfer[0]); 989 parm.methods = xfer->endpoint->methods; 990 parm.curr_xfer = xfer; 991 992 /* 993 * Call the Host or Device controller transfer 994 * setup routine: 995 */ 996 (udev->bus->methods->xfer_setup) (&parm); 997 998 /* check for error */ 999 if (parm.err) 1000 goto done; 1001 1002 if (buf) { 1003 /* 1004 * Increment the endpoint refcount. This 1005 * basically prevents setting a new 1006 * configuration and alternate setting 1007 * when USB transfers are in use on 1008 * the given interface. Search the USB 1009 * code for "endpoint->refcount_alloc" if you 1010 * want more information. 1011 */ 1012 USB_BUS_LOCK(info->bus); 1013 if (xfer->endpoint->refcount_alloc >= USB_EP_REF_MAX) 1014 parm.err = USB_ERR_INVAL; 1015 1016 xfer->endpoint->refcount_alloc++; 1017 1018 if (xfer->endpoint->refcount_alloc == 0) 1019 panic("usbd_transfer_setup(): Refcount wrapped to zero\n"); 1020 USB_BUS_UNLOCK(info->bus); 1021 1022 /* 1023 * Whenever we set ppxfer[] then we 1024 * also need to increment the 1025 * "setup_refcount": 1026 */ 1027 info->setup_refcount++; 1028 1029 /* 1030 * Transfer is successfully setup and 1031 * can be used: 1032 */ 1033 ppxfer[n] = xfer; 1034 } 1035 1036 /* check for error */ 1037 if (parm.err) 1038 goto done; 1039 } 1040 1041 if (buf || parm.err) { 1042 goto done; 1043 } 1044 if (refcount == 0) { 1045 /* no transfers - nothing to do ! */ 1046 goto done; 1047 } 1048 /* align data properly */ 1049 parm.size[0] += ((-parm.size[0]) & (USB_HOST_ALIGN - 1)); 1050 1051 /* store offset temporarily */ 1052 parm.size[1] = parm.size[0]; 1053 1054 /* 1055 * The number of DMA tags required depends on 1056 * the number of endpoints. The current estimate 1057 * for maximum number of DMA tags per endpoint 1058 * is two. 1059 */ 1060 parm.dma_tag_max += 2 * MIN(n_setup, USB_EP_MAX); 1061 1062 /* 1063 * DMA tags for QH, TD, Data and more. 1064 */ 1065 parm.dma_tag_max += 8; 1066 1067 parm.dma_tag_p += parm.dma_tag_max; 1068 1069 parm.size[0] += ((uint8_t *)parm.dma_tag_p) - 1070 ((uint8_t *)0); 1071 1072 /* align data properly */ 1073 parm.size[0] += ((-parm.size[0]) & (USB_HOST_ALIGN - 1)); 1074 1075 /* store offset temporarily */ 1076 parm.size[3] = parm.size[0]; 1077 1078 parm.size[0] += ((uint8_t *)parm.dma_page_ptr) - 1079 ((uint8_t *)0); 1080 1081 /* align data properly */ 1082 parm.size[0] += ((-parm.size[0]) & (USB_HOST_ALIGN - 1)); 1083 1084 /* store offset temporarily */ 1085 parm.size[4] = parm.size[0]; 1086 1087 parm.size[0] += ((uint8_t *)parm.dma_page_cache_ptr) - 1088 ((uint8_t *)0); 1089 1090 /* store end offset temporarily */ 1091 parm.size[5] = parm.size[0]; 1092 1093 parm.size[0] += ((uint8_t *)parm.xfer_page_cache_ptr) - 1094 ((uint8_t *)0); 1095 1096 /* store end offset temporarily */ 1097 1098 parm.size[2] = parm.size[0]; 1099 1100 /* align data properly */ 1101 parm.size[0] += ((-parm.size[0]) & (USB_HOST_ALIGN - 1)); 1102 1103 parm.size[6] = parm.size[0]; 1104 1105 parm.size[0] += ((uint8_t *)parm.xfer_length_ptr) - 1106 ((uint8_t *)0); 1107 1108 /* align data properly */ 1109 parm.size[0] += ((-parm.size[0]) & (USB_HOST_ALIGN - 1)); 1110 1111 /* allocate zeroed memory */ 1112 buf = malloc(parm.size[0], M_USB, M_WAITOK | M_ZERO); 1113 1114 if (buf == NULL) { 1115 parm.err = USB_ERR_NOMEM; 1116 DPRINTFN(0, "cannot allocate memory block for " 1117 "configuration (%d bytes)\n", 1118 parm.size[0]); 1119 goto done; 1120 } 1121 parm.dma_tag_p = USB_ADD_BYTES(buf, parm.size[1]); 1122 parm.dma_page_ptr = USB_ADD_BYTES(buf, parm.size[3]); 1123 parm.dma_page_cache_ptr = USB_ADD_BYTES(buf, parm.size[4]); 1124 parm.xfer_page_cache_ptr = USB_ADD_BYTES(buf, parm.size[5]); 1125 parm.xfer_length_ptr = USB_ADD_BYTES(buf, parm.size[6]); 1126 } 1127 1128done: 1129 if (buf) { 1130 if (info->setup_refcount == 0) { 1131 /* 1132 * "usbd_transfer_unsetup_sub" will unlock 1133 * the bus mutex before returning ! 1134 */ 1135 USB_BUS_LOCK(info->bus); 1136 1137 /* something went wrong */ 1138 usbd_transfer_unsetup_sub(info, 0); 1139 } 1140 } 1141 if (parm.err) { 1142 usbd_transfer_unsetup(ppxfer, n_setup); 1143 } 1144 return (parm.err); 1145} 1146 1147/*------------------------------------------------------------------------* 1148 * usbd_transfer_unsetup_sub - factored out code 1149 *------------------------------------------------------------------------*/ 1150static void 1151usbd_transfer_unsetup_sub(struct usb_xfer_root *info, uint8_t needs_delay) 1152{ 1153#if USB_HAVE_BUSDMA 1154 struct usb_page_cache *pc; 1155#endif 1156 1157 USB_BUS_LOCK_ASSERT(info->bus, MA_OWNED); 1158 1159 /* wait for any outstanding DMA operations */ 1160 1161 if (needs_delay) { 1162 usb_timeout_t temp; 1163 temp = usbd_get_dma_delay(info->udev); 1164 if (temp != 0) { 1165 usb_pause_mtx(&info->bus->bus_mtx, 1166 USB_MS_TO_TICKS(temp)); 1167 } 1168 } 1169 1170 /* make sure that our done messages are not queued anywhere */ 1171 usb_proc_mwait(info->done_p, &info->done_m[0], &info->done_m[1]); 1172 1173 USB_BUS_UNLOCK(info->bus); 1174 1175#if USB_HAVE_BUSDMA 1176 /* free DMA'able memory, if any */ 1177 pc = info->dma_page_cache_start; 1178 while (pc != info->dma_page_cache_end) { 1179 usb_pc_free_mem(pc); 1180 pc++; 1181 } 1182 1183 /* free DMA maps in all "xfer->frbuffers" */ 1184 pc = info->xfer_page_cache_start; 1185 while (pc != info->xfer_page_cache_end) { 1186 usb_pc_dmamap_destroy(pc); 1187 pc++; 1188 } 1189 1190 /* free all DMA tags */ 1191 usb_dma_tag_unsetup(&info->dma_parent_tag); 1192#endif 1193 1194 cv_destroy(&info->cv_drain); 1195 1196 /* 1197 * free the "memory_base" last, hence the "info" structure is 1198 * contained within the "memory_base"! 1199 */ 1200 free(info->memory_base, M_USB); 1201} 1202 1203/*------------------------------------------------------------------------* 1204 * usbd_transfer_unsetup - unsetup/free an array of USB transfers 1205 * 1206 * NOTE: All USB transfers in progress will get called back passing 1207 * the error code "USB_ERR_CANCELLED" before this function 1208 * returns. 1209 *------------------------------------------------------------------------*/ 1210void 1211usbd_transfer_unsetup(struct usb_xfer **pxfer, uint16_t n_setup) 1212{ 1213 struct usb_xfer *xfer; 1214 struct usb_xfer_root *info; 1215 uint8_t needs_delay = 0; 1216 1217 WITNESS_WARN(WARN_GIANTOK | WARN_SLEEPOK, NULL, 1218 "usbd_transfer_unsetup can sleep!"); 1219 1220 while (n_setup--) { 1221 xfer = pxfer[n_setup]; 1222 1223 if (xfer == NULL) 1224 continue; 1225 1226 info = xfer->xroot; 1227 1228 USB_XFER_LOCK(xfer); 1229 USB_BUS_LOCK(info->bus); 1230 1231 /* 1232 * HINT: when you start/stop a transfer, it might be a 1233 * good idea to directly use the "pxfer[]" structure: 1234 * 1235 * usbd_transfer_start(sc->pxfer[0]); 1236 * usbd_transfer_stop(sc->pxfer[0]); 1237 * 1238 * That way, if your code has many parts that will not 1239 * stop running under the same lock, in other words 1240 * "xfer_mtx", the usbd_transfer_start and 1241 * usbd_transfer_stop functions will simply return 1242 * when they detect a NULL pointer argument. 1243 * 1244 * To avoid any races we clear the "pxfer[]" pointer 1245 * while holding the private mutex of the driver: 1246 */ 1247 pxfer[n_setup] = NULL; 1248 1249 USB_BUS_UNLOCK(info->bus); 1250 USB_XFER_UNLOCK(xfer); 1251 1252 usbd_transfer_drain(xfer); 1253 1254#if USB_HAVE_BUSDMA 1255 if (xfer->flags_int.bdma_enable) 1256 needs_delay = 1; 1257#endif 1258 /* 1259 * NOTE: default endpoint does not have an 1260 * interface, even if endpoint->iface_index == 0 1261 */ 1262 USB_BUS_LOCK(info->bus); 1263 xfer->endpoint->refcount_alloc--; 1264 USB_BUS_UNLOCK(info->bus); 1265 1266 usb_callout_drain(&xfer->timeout_handle); 1267 1268 USB_BUS_LOCK(info->bus); 1269 1270 USB_ASSERT(info->setup_refcount != 0, ("Invalid setup " 1271 "reference count\n")); 1272 1273 info->setup_refcount--; 1274 1275 if (info->setup_refcount == 0) { 1276 usbd_transfer_unsetup_sub(info, 1277 needs_delay); 1278 } else { 1279 USB_BUS_UNLOCK(info->bus); 1280 } 1281 } 1282} 1283 1284/*------------------------------------------------------------------------* 1285 * usbd_control_transfer_init - factored out code 1286 * 1287 * In USB Device Mode we have to wait for the SETUP packet which 1288 * containst the "struct usb_device_request" structure, before we can 1289 * transfer any data. In USB Host Mode we already have the SETUP 1290 * packet at the moment the USB transfer is started. This leads us to 1291 * having to setup the USB transfer at two different places in 1292 * time. This function just contains factored out control transfer 1293 * initialisation code, so that we don't duplicate the code. 1294 *------------------------------------------------------------------------*/ 1295static void 1296usbd_control_transfer_init(struct usb_xfer *xfer) 1297{ 1298 struct usb_device_request req; 1299 1300 /* copy out the USB request header */ 1301 1302 usbd_copy_out(xfer->frbuffers, 0, &req, sizeof(req)); 1303 1304 /* setup remainder */ 1305 1306 xfer->flags_int.control_rem = UGETW(req.wLength); 1307 1308 /* copy direction to endpoint variable */ 1309 1310 xfer->endpointno &= ~(UE_DIR_IN | UE_DIR_OUT); 1311 xfer->endpointno |= 1312 (req.bmRequestType & UT_READ) ? UE_DIR_IN : UE_DIR_OUT; 1313} 1314 1315/*------------------------------------------------------------------------* 1316 * usbd_setup_ctrl_transfer 1317 * 1318 * This function handles initialisation of control transfers. Control 1319 * transfers are special in that regard that they can both transmit 1320 * and receive data. 1321 * 1322 * Return values: 1323 * 0: Success 1324 * Else: Failure 1325 *------------------------------------------------------------------------*/ 1326static int 1327usbd_setup_ctrl_transfer(struct usb_xfer *xfer) 1328{ 1329 usb_frlength_t len; 1330 1331 /* Check for control endpoint stall */ 1332 if (xfer->flags.stall_pipe && xfer->flags_int.control_act) { 1333 /* the control transfer is no longer active */ 1334 xfer->flags_int.control_stall = 1; 1335 xfer->flags_int.control_act = 0; 1336 } else { 1337 /* don't stall control transfer by default */ 1338 xfer->flags_int.control_stall = 0; 1339 } 1340 1341 /* Check for invalid number of frames */ 1342 if (xfer->nframes > 2) { 1343 /* 1344 * If you need to split a control transfer, you 1345 * have to do one part at a time. Only with 1346 * non-control transfers you can do multiple 1347 * parts a time. 1348 */ 1349 DPRINTFN(0, "Too many frames: %u\n", 1350 (unsigned int)xfer->nframes); 1351 goto error; 1352 } 1353 1354 /* 1355 * Check if there is a control 1356 * transfer in progress: 1357 */ 1358 if (xfer->flags_int.control_act) { 1359 1360 if (xfer->flags_int.control_hdr) { 1361 1362 /* clear send header flag */ 1363 1364 xfer->flags_int.control_hdr = 0; 1365 1366 /* setup control transfer */ 1367 if (xfer->flags_int.usb_mode == USB_MODE_DEVICE) { 1368 usbd_control_transfer_init(xfer); 1369 } 1370 } 1371 /* get data length */ 1372 1373 len = xfer->sumlen; 1374 1375 } else { 1376 1377 /* the size of the SETUP structure is hardcoded ! */ 1378 1379 if (xfer->frlengths[0] != sizeof(struct usb_device_request)) { 1380 DPRINTFN(0, "Wrong framelength %u != %zu\n", 1381 xfer->frlengths[0], sizeof(struct 1382 usb_device_request)); 1383 goto error; 1384 } 1385 /* check USB mode */ 1386 if (xfer->flags_int.usb_mode == USB_MODE_DEVICE) { 1387 1388 /* check number of frames */ 1389 if (xfer->nframes != 1) { 1390 /* 1391 * We need to receive the setup 1392 * message first so that we know the 1393 * data direction! 1394 */ 1395 DPRINTF("Misconfigured transfer\n"); 1396 goto error; 1397 } 1398 /* 1399 * Set a dummy "control_rem" value. This 1400 * variable will be overwritten later by a 1401 * call to "usbd_control_transfer_init()" ! 1402 */ 1403 xfer->flags_int.control_rem = 0xFFFF; 1404 } else { 1405 1406 /* setup "endpoint" and "control_rem" */ 1407 1408 usbd_control_transfer_init(xfer); 1409 } 1410 1411 /* set transfer-header flag */ 1412 1413 xfer->flags_int.control_hdr = 1; 1414 1415 /* get data length */ 1416 1417 len = (xfer->sumlen - sizeof(struct usb_device_request)); 1418 } 1419 1420 /* check if there is a length mismatch */ 1421 1422 if (len > xfer->flags_int.control_rem) { 1423 DPRINTFN(0, "Length (%d) greater than " 1424 "remaining length (%d)\n", len, 1425 xfer->flags_int.control_rem); 1426 goto error; 1427 } 1428 /* check if we are doing a short transfer */ 1429 1430 if (xfer->flags.force_short_xfer) { 1431 xfer->flags_int.control_rem = 0; 1432 } else { 1433 if ((len != xfer->max_data_length) && 1434 (len != xfer->flags_int.control_rem) && 1435 (xfer->nframes != 1)) { 1436 DPRINTFN(0, "Short control transfer without " 1437 "force_short_xfer set\n"); 1438 goto error; 1439 } 1440 xfer->flags_int.control_rem -= len; 1441 } 1442 1443 /* the status part is executed when "control_act" is 0 */ 1444 1445 if ((xfer->flags_int.control_rem > 0) || 1446 (xfer->flags.manual_status)) { 1447 /* don't execute the STATUS stage yet */ 1448 xfer->flags_int.control_act = 1; 1449 1450 /* sanity check */ 1451 if ((!xfer->flags_int.control_hdr) && 1452 (xfer->nframes == 1)) { 1453 /* 1454 * This is not a valid operation! 1455 */ 1456 DPRINTFN(0, "Invalid parameter " 1457 "combination\n"); 1458 goto error; 1459 } 1460 } else { 1461 /* time to execute the STATUS stage */ 1462 xfer->flags_int.control_act = 0; 1463 } 1464 return (0); /* success */ 1465 1466error: 1467 return (1); /* failure */ 1468} 1469 1470/*------------------------------------------------------------------------* 1471 * usbd_transfer_submit - start USB hardware for the given transfer 1472 * 1473 * This function should only be called from the USB callback. 1474 *------------------------------------------------------------------------*/ 1475void 1476usbd_transfer_submit(struct usb_xfer *xfer) 1477{ 1478 struct usb_xfer_root *info; 1479 struct usb_bus *bus; 1480 usb_frcount_t x; 1481 1482 info = xfer->xroot; 1483 bus = info->bus; 1484 1485 DPRINTF("xfer=%p, endpoint=%p, nframes=%d, dir=%s\n", 1486 xfer, xfer->endpoint, xfer->nframes, USB_GET_DATA_ISREAD(xfer) ? 1487 "read" : "write"); 1488 1489#ifdef USB_DEBUG 1490 if (USB_DEBUG_VAR > 0) { 1491 USB_BUS_LOCK(bus); 1492 1493 usb_dump_endpoint(xfer->endpoint); 1494 1495 USB_BUS_UNLOCK(bus); 1496 } 1497#endif 1498 1499 USB_XFER_LOCK_ASSERT(xfer, MA_OWNED); 1500 USB_BUS_LOCK_ASSERT(bus, MA_NOTOWNED); 1501 1502 /* Only open the USB transfer once! */ 1503 if (!xfer->flags_int.open) { 1504 xfer->flags_int.open = 1; 1505 1506 DPRINTF("open\n"); 1507 1508 USB_BUS_LOCK(bus); 1509 (xfer->endpoint->methods->open) (xfer); 1510 USB_BUS_UNLOCK(bus); 1511 } 1512 /* set "transferring" flag */ 1513 xfer->flags_int.transferring = 1; 1514 1515#if USB_HAVE_POWERD 1516 /* increment power reference */ 1517 usbd_transfer_power_ref(xfer, 1); 1518#endif 1519 /* 1520 * Check if the transfer is waiting on a queue, most 1521 * frequently the "done_q": 1522 */ 1523 if (xfer->wait_queue) { 1524 USB_BUS_LOCK(bus); 1525 usbd_transfer_dequeue(xfer); 1526 USB_BUS_UNLOCK(bus); 1527 } 1528 /* clear "did_dma_delay" flag */ 1529 xfer->flags_int.did_dma_delay = 0; 1530 1531 /* clear "did_close" flag */ 1532 xfer->flags_int.did_close = 0; 1533 1534#if USB_HAVE_BUSDMA 1535 /* clear "bdma_setup" flag */ 1536 xfer->flags_int.bdma_setup = 0; 1537#endif 1538 /* by default we cannot cancel any USB transfer immediately */ 1539 xfer->flags_int.can_cancel_immed = 0; 1540 1541 /* clear lengths and frame counts by default */ 1542 xfer->sumlen = 0; 1543 xfer->actlen = 0; 1544 xfer->aframes = 0; 1545 1546 /* clear any previous errors */ 1547 xfer->error = 0; 1548 1549 /* Check if the device is still alive */ 1550 if (info->udev->state < USB_STATE_POWERED) { 1551 USB_BUS_LOCK(bus); 1552 /* 1553 * Must return cancelled error code else 1554 * device drivers can hang. 1555 */ 1556 usbd_transfer_done(xfer, USB_ERR_CANCELLED); 1557 USB_BUS_UNLOCK(bus); 1558 return; 1559 } 1560 1561 /* sanity check */ 1562 if (xfer->nframes == 0) { 1563 if (xfer->flags.stall_pipe) { 1564 /* 1565 * Special case - want to stall without transferring 1566 * any data: 1567 */ 1568 DPRINTF("xfer=%p nframes=0: stall " 1569 "or clear stall!\n", xfer); 1570 USB_BUS_LOCK(bus); 1571 xfer->flags_int.can_cancel_immed = 1; 1572 /* start the transfer */ 1573 usb_command_wrapper(&xfer->endpoint->endpoint_q, xfer); 1574 USB_BUS_UNLOCK(bus); 1575 return; 1576 } 1577 USB_BUS_LOCK(bus); 1578 usbd_transfer_done(xfer, USB_ERR_INVAL); 1579 USB_BUS_UNLOCK(bus); 1580 return; 1581 } 1582 /* compute total transfer length */ 1583 1584 for (x = 0; x != xfer->nframes; x++) { 1585 xfer->sumlen += xfer->frlengths[x]; 1586 if (xfer->sumlen < xfer->frlengths[x]) { 1587 /* length wrapped around */ 1588 USB_BUS_LOCK(bus); 1589 usbd_transfer_done(xfer, USB_ERR_INVAL); 1590 USB_BUS_UNLOCK(bus); 1591 return; 1592 } 1593 } 1594 1595 /* clear some internal flags */ 1596 1597 xfer->flags_int.short_xfer_ok = 0; 1598 xfer->flags_int.short_frames_ok = 0; 1599 1600 /* check if this is a control transfer */ 1601 1602 if (xfer->flags_int.control_xfr) { 1603 1604 if (usbd_setup_ctrl_transfer(xfer)) { 1605 USB_BUS_LOCK(bus); 1606 usbd_transfer_done(xfer, USB_ERR_STALLED); 1607 USB_BUS_UNLOCK(bus); 1608 return; 1609 } 1610 } 1611 /* 1612 * Setup filtered version of some transfer flags, 1613 * in case of data read direction 1614 */ 1615 if (USB_GET_DATA_ISREAD(xfer)) { 1616 1617 if (xfer->flags.short_frames_ok) { 1618 xfer->flags_int.short_xfer_ok = 1; 1619 xfer->flags_int.short_frames_ok = 1; 1620 } else if (xfer->flags.short_xfer_ok) { 1621 xfer->flags_int.short_xfer_ok = 1; 1622 1623 /* check for control transfer */ 1624 if (xfer->flags_int.control_xfr) { 1625 /* 1626 * 1) Control transfers do not support 1627 * reception of multiple short USB 1628 * frames in host mode and device side 1629 * mode, with exception of: 1630 * 1631 * 2) Due to sometimes buggy device 1632 * side firmware we need to do a 1633 * STATUS stage in case of short 1634 * control transfers in USB host mode. 1635 * The STATUS stage then becomes the 1636 * "alt_next" to the DATA stage. 1637 */ 1638 xfer->flags_int.short_frames_ok = 1; 1639 } 1640 } 1641 } 1642 /* 1643 * Check if BUS-DMA support is enabled and try to load virtual 1644 * buffers into DMA, if any: 1645 */ 1646#if USB_HAVE_BUSDMA 1647 if (xfer->flags_int.bdma_enable) { 1648 /* insert the USB transfer last in the BUS-DMA queue */ 1649 usb_command_wrapper(&xfer->xroot->dma_q, xfer); 1650 return; 1651 } 1652#endif 1653 /* 1654 * Enter the USB transfer into the Host Controller or 1655 * Device Controller schedule: 1656 */ 1657 usbd_pipe_enter(xfer); 1658} 1659 1660/*------------------------------------------------------------------------* 1661 * usbd_pipe_enter - factored out code 1662 *------------------------------------------------------------------------*/ 1663void 1664usbd_pipe_enter(struct usb_xfer *xfer) 1665{ 1666 struct usb_endpoint *ep; 1667 1668 USB_XFER_LOCK_ASSERT(xfer, MA_OWNED); 1669 1670 USB_BUS_LOCK(xfer->xroot->bus); 1671 1672 ep = xfer->endpoint; 1673 1674 DPRINTF("enter\n"); 1675 1676 /* enter the transfer */ 1677 (ep->methods->enter) (xfer); 1678 1679 xfer->flags_int.can_cancel_immed = 1; 1680 1681 /* check for transfer error */ 1682 if (xfer->error) { 1683 /* some error has happened */ 1684 usbd_transfer_done(xfer, 0); 1685 USB_BUS_UNLOCK(xfer->xroot->bus); 1686 return; 1687 } 1688 1689 /* start the transfer */ 1690 usb_command_wrapper(&ep->endpoint_q, xfer); 1691 USB_BUS_UNLOCK(xfer->xroot->bus); 1692} 1693 1694/*------------------------------------------------------------------------* 1695 * usbd_transfer_start - start an USB transfer 1696 * 1697 * NOTE: Calling this function more than one time will only 1698 * result in a single transfer start, until the USB transfer 1699 * completes. 1700 *------------------------------------------------------------------------*/ 1701void 1702usbd_transfer_start(struct usb_xfer *xfer) 1703{ 1704 if (xfer == NULL) { 1705 /* transfer is gone */ 1706 return; 1707 } 1708 USB_XFER_LOCK_ASSERT(xfer, MA_OWNED); 1709 1710 /* mark the USB transfer started */ 1711 1712 if (!xfer->flags_int.started) { 1713 /* lock the BUS lock to avoid races updating flags_int */ 1714 USB_BUS_LOCK(xfer->xroot->bus); 1715 xfer->flags_int.started = 1; 1716 USB_BUS_UNLOCK(xfer->xroot->bus); 1717 } 1718 /* check if the USB transfer callback is already transferring */ 1719 1720 if (xfer->flags_int.transferring) { 1721 return; 1722 } 1723 USB_BUS_LOCK(xfer->xroot->bus); 1724 /* call the USB transfer callback */ 1725 usbd_callback_ss_done_defer(xfer); 1726 USB_BUS_UNLOCK(xfer->xroot->bus); 1727} 1728 1729/*------------------------------------------------------------------------* 1730 * usbd_transfer_stop - stop an USB transfer 1731 * 1732 * NOTE: Calling this function more than one time will only 1733 * result in a single transfer stop. 1734 * NOTE: When this function returns it is not safe to free nor 1735 * reuse any DMA buffers. See "usbd_transfer_drain()". 1736 *------------------------------------------------------------------------*/ 1737void 1738usbd_transfer_stop(struct usb_xfer *xfer) 1739{ 1740 struct usb_endpoint *ep; 1741 1742 if (xfer == NULL) { 1743 /* transfer is gone */ 1744 return; 1745 } 1746 USB_XFER_LOCK_ASSERT(xfer, MA_OWNED); 1747 1748 /* check if the USB transfer was ever opened */ 1749 1750 if (!xfer->flags_int.open) { 1751 if (xfer->flags_int.started) { 1752 /* nothing to do except clearing the "started" flag */ 1753 /* lock the BUS lock to avoid races updating flags_int */ 1754 USB_BUS_LOCK(xfer->xroot->bus); 1755 xfer->flags_int.started = 0; 1756 USB_BUS_UNLOCK(xfer->xroot->bus); 1757 } 1758 return; 1759 } 1760 /* try to stop the current USB transfer */ 1761 1762 USB_BUS_LOCK(xfer->xroot->bus); 1763 /* override any previous error */ 1764 xfer->error = USB_ERR_CANCELLED; 1765 1766 /* 1767 * Clear "open" and "started" when both private and USB lock 1768 * is locked so that we don't get a race updating "flags_int" 1769 */ 1770 xfer->flags_int.open = 0; 1771 xfer->flags_int.started = 0; 1772 1773 /* 1774 * Check if we can cancel the USB transfer immediately. 1775 */ 1776 if (xfer->flags_int.transferring) { 1777 if (xfer->flags_int.can_cancel_immed && 1778 (!xfer->flags_int.did_close)) { 1779 DPRINTF("close\n"); 1780 /* 1781 * The following will lead to an USB_ERR_CANCELLED 1782 * error code being passed to the USB callback. 1783 */ 1784 (xfer->endpoint->methods->close) (xfer); 1785 /* only close once */ 1786 xfer->flags_int.did_close = 1; 1787 } else { 1788 /* need to wait for the next done callback */ 1789 } 1790 } else { 1791 DPRINTF("close\n"); 1792 1793 /* close here and now */ 1794 (xfer->endpoint->methods->close) (xfer); 1795 1796 /* 1797 * Any additional DMA delay is done by 1798 * "usbd_transfer_unsetup()". 1799 */ 1800 1801 /* 1802 * Special case. Check if we need to restart a blocked 1803 * endpoint. 1804 */ 1805 ep = xfer->endpoint; 1806 1807 /* 1808 * If the current USB transfer is completing we need 1809 * to start the next one: 1810 */ 1811 if (ep->endpoint_q.curr == xfer) { 1812 usb_command_wrapper(&ep->endpoint_q, NULL); 1813 } 1814 } 1815 1816 USB_BUS_UNLOCK(xfer->xroot->bus); 1817} 1818 1819/*------------------------------------------------------------------------* 1820 * usbd_transfer_pending 1821 * 1822 * This function will check if an USB transfer is pending which is a 1823 * little bit complicated! 1824 * Return values: 1825 * 0: Not pending 1826 * 1: Pending: The USB transfer will receive a callback in the future. 1827 *------------------------------------------------------------------------*/ 1828uint8_t 1829usbd_transfer_pending(struct usb_xfer *xfer) 1830{ 1831 struct usb_xfer_root *info; 1832 struct usb_xfer_queue *pq; 1833 1834 if (xfer == NULL) { 1835 /* transfer is gone */ 1836 return (0); 1837 } 1838 USB_XFER_LOCK_ASSERT(xfer, MA_OWNED); 1839 1840 if (xfer->flags_int.transferring) { 1841 /* trivial case */ 1842 return (1); 1843 } 1844 USB_BUS_LOCK(xfer->xroot->bus); 1845 if (xfer->wait_queue) { 1846 /* we are waiting on a queue somewhere */ 1847 USB_BUS_UNLOCK(xfer->xroot->bus); 1848 return (1); 1849 } 1850 info = xfer->xroot; 1851 pq = &info->done_q; 1852 1853 if (pq->curr == xfer) { 1854 /* we are currently scheduled for callback */ 1855 USB_BUS_UNLOCK(xfer->xroot->bus); 1856 return (1); 1857 } 1858 /* we are not pending */ 1859 USB_BUS_UNLOCK(xfer->xroot->bus); 1860 return (0); 1861} 1862 1863/*------------------------------------------------------------------------* 1864 * usbd_transfer_drain 1865 * 1866 * This function will stop the USB transfer and wait for any 1867 * additional BUS-DMA and HW-DMA operations to complete. Buffers that 1868 * are loaded into DMA can safely be freed or reused after that this 1869 * function has returned. 1870 *------------------------------------------------------------------------*/ 1871void 1872usbd_transfer_drain(struct usb_xfer *xfer) 1873{ 1874 WITNESS_WARN(WARN_GIANTOK | WARN_SLEEPOK, NULL, 1875 "usbd_transfer_drain can sleep!"); 1876 1877 if (xfer == NULL) { 1878 /* transfer is gone */ 1879 return; 1880 } 1881 if (xfer->xroot->xfer_mtx != &Giant) { 1882 USB_XFER_LOCK_ASSERT(xfer, MA_NOTOWNED); 1883 } 1884 USB_XFER_LOCK(xfer); 1885 1886 usbd_transfer_stop(xfer); 1887 1888 while (usbd_transfer_pending(xfer) || 1889 xfer->flags_int.doing_callback) { 1890 1891 /* 1892 * It is allowed that the callback can drop its 1893 * transfer mutex. In that case checking only 1894 * "usbd_transfer_pending()" is not enough to tell if 1895 * the USB transfer is fully drained. We also need to 1896 * check the internal "doing_callback" flag. 1897 */ 1898 xfer->flags_int.draining = 1; 1899 1900 /* 1901 * Wait until the current outstanding USB 1902 * transfer is complete ! 1903 */ 1904 cv_wait(&xfer->xroot->cv_drain, xfer->xroot->xfer_mtx); 1905 } 1906 USB_XFER_UNLOCK(xfer); 1907} 1908 1909struct usb_page_cache * 1910usbd_xfer_get_frame(struct usb_xfer *xfer, usb_frcount_t frindex) 1911{ 1912 KASSERT(frindex < xfer->max_frame_count, ("frame index overflow")); 1913 1914 return (&xfer->frbuffers[frindex]); 1915} 1916 1917/*------------------------------------------------------------------------* 1918 * usbd_xfer_get_fps_shift 1919 * 1920 * The following function is only useful for isochronous transfers. It 1921 * returns how many times the frame execution rate has been shifted 1922 * down. 1923 * 1924 * Return value: 1925 * Success: 0..3 1926 * Failure: 0 1927 *------------------------------------------------------------------------*/ 1928uint8_t 1929usbd_xfer_get_fps_shift(struct usb_xfer *xfer) 1930{ 1931 return (xfer->fps_shift); 1932} 1933 1934usb_frlength_t 1935usbd_xfer_frame_len(struct usb_xfer *xfer, usb_frcount_t frindex) 1936{ 1937 KASSERT(frindex < xfer->max_frame_count, ("frame index overflow")); 1938 1939 return (xfer->frlengths[frindex]); 1940} 1941 1942/*------------------------------------------------------------------------* 1943 * usbd_xfer_set_frame_data 1944 * 1945 * This function sets the pointer of the buffer that should 1946 * loaded directly into DMA for the given USB frame. Passing "ptr" 1947 * equal to NULL while the corresponding "frlength" is greater 1948 * than zero gives undefined results! 1949 *------------------------------------------------------------------------*/ 1950void 1951usbd_xfer_set_frame_data(struct usb_xfer *xfer, usb_frcount_t frindex, 1952 void *ptr, usb_frlength_t len) 1953{ 1954 KASSERT(frindex < xfer->max_frame_count, ("frame index overflow")); 1955 1956 /* set virtual address to load and length */ 1957 xfer->frbuffers[frindex].buffer = ptr; 1958 usbd_xfer_set_frame_len(xfer, frindex, len); 1959} 1960 1961void 1962usbd_xfer_frame_data(struct usb_xfer *xfer, usb_frcount_t frindex, 1963 void **ptr, int *len) 1964{ 1965 KASSERT(frindex < xfer->max_frame_count, ("frame index overflow")); 1966 1967 if (ptr != NULL) 1968 *ptr = xfer->frbuffers[frindex].buffer; 1969 if (len != NULL) 1970 *len = xfer->frlengths[frindex]; 1971} 1972 1973void 1974usbd_xfer_status(struct usb_xfer *xfer, int *actlen, int *sumlen, int *aframes, 1975 int *nframes) 1976{ 1977 if (actlen != NULL) 1978 *actlen = xfer->actlen; 1979 if (sumlen != NULL) 1980 *sumlen = xfer->sumlen; 1981 if (aframes != NULL) 1982 *aframes = xfer->aframes; 1983 if (nframes != NULL) 1984 *nframes = xfer->nframes; 1985} 1986 1987/*------------------------------------------------------------------------* 1988 * usbd_xfer_set_frame_offset 1989 * 1990 * This function sets the frame data buffer offset relative to the beginning 1991 * of the USB DMA buffer allocated for this USB transfer. 1992 *------------------------------------------------------------------------*/ 1993void 1994usbd_xfer_set_frame_offset(struct usb_xfer *xfer, usb_frlength_t offset, 1995 usb_frcount_t frindex) 1996{ 1997 KASSERT(!xfer->flags.ext_buffer, ("Cannot offset data frame " 1998 "when the USB buffer is external\n")); 1999 KASSERT(frindex < xfer->max_frame_count, ("frame index overflow")); 2000 2001 /* set virtual address to load */ 2002 xfer->frbuffers[frindex].buffer = 2003 USB_ADD_BYTES(xfer->local_buffer, offset); 2004} 2005 2006void 2007usbd_xfer_set_interval(struct usb_xfer *xfer, int i) 2008{ 2009 xfer->interval = i; 2010} 2011 2012void 2013usbd_xfer_set_timeout(struct usb_xfer *xfer, int t) 2014{ 2015 xfer->timeout = t; 2016} 2017 2018void 2019usbd_xfer_set_frames(struct usb_xfer *xfer, usb_frcount_t n) 2020{ 2021 xfer->nframes = n; 2022} 2023 2024usb_frcount_t 2025usbd_xfer_max_frames(struct usb_xfer *xfer) 2026{ 2027 return (xfer->max_frame_count); 2028} 2029 2030usb_frlength_t 2031usbd_xfer_max_len(struct usb_xfer *xfer) 2032{ 2033 return (xfer->max_data_length); 2034} 2035 2036usb_frlength_t 2037usbd_xfer_max_framelen(struct usb_xfer *xfer) 2038{ 2039 return (xfer->max_frame_size); 2040} 2041 2042void 2043usbd_xfer_set_frame_len(struct usb_xfer *xfer, usb_frcount_t frindex, 2044 usb_frlength_t len) 2045{ 2046 KASSERT(frindex < xfer->max_frame_count, ("frame index overflow")); 2047 2048 xfer->frlengths[frindex] = len; 2049} 2050 2051/*------------------------------------------------------------------------* 2052 * usb_callback_proc - factored out code 2053 * 2054 * This function performs USB callbacks. 2055 *------------------------------------------------------------------------*/ 2056static void 2057usb_callback_proc(struct usb_proc_msg *_pm) 2058{ 2059 struct usb_done_msg *pm = (void *)_pm; 2060 struct usb_xfer_root *info = pm->xroot; 2061 2062 /* Change locking order */ 2063 USB_BUS_UNLOCK(info->bus); 2064 2065 /* 2066 * We exploit the fact that the mutex is the same for all 2067 * callbacks that will be called from this thread: 2068 */ 2069 mtx_lock(info->xfer_mtx); 2070 USB_BUS_LOCK(info->bus); 2071 2072 /* Continue where we lost track */ 2073 usb_command_wrapper(&info->done_q, 2074 info->done_q.curr); 2075 2076 mtx_unlock(info->xfer_mtx); 2077} 2078 2079/*------------------------------------------------------------------------* 2080 * usbd_callback_ss_done_defer 2081 * 2082 * This function will defer the start, stop and done callback to the 2083 * correct thread. 2084 *------------------------------------------------------------------------*/ 2085static void 2086usbd_callback_ss_done_defer(struct usb_xfer *xfer) 2087{ 2088 struct usb_xfer_root *info = xfer->xroot; 2089 struct usb_xfer_queue *pq = &info->done_q; 2090 2091 USB_BUS_LOCK_ASSERT(xfer->xroot->bus, MA_OWNED); 2092 2093 if (pq->curr != xfer) { 2094 usbd_transfer_enqueue(pq, xfer); 2095 } 2096 if (!pq->recurse_1) { 2097 2098 /* 2099 * We have to postpone the callback due to the fact we 2100 * will have a Lock Order Reversal, LOR, if we try to 2101 * proceed ! 2102 */ 2103 if (usb_proc_msignal(info->done_p, 2104 &info->done_m[0], &info->done_m[1])) { 2105 /* ignore */ 2106 } 2107 } else { 2108 /* clear second recurse flag */ 2109 pq->recurse_2 = 0; 2110 } 2111 return; 2112 2113} 2114 2115/*------------------------------------------------------------------------* 2116 * usbd_callback_wrapper 2117 * 2118 * This is a wrapper for USB callbacks. This wrapper does some 2119 * auto-magic things like figuring out if we can call the callback 2120 * directly from the current context or if we need to wakeup the 2121 * interrupt process. 2122 *------------------------------------------------------------------------*/ 2123static void 2124usbd_callback_wrapper(struct usb_xfer_queue *pq) 2125{ 2126 struct usb_xfer *xfer = pq->curr; 2127 struct usb_xfer_root *info = xfer->xroot; 2128 2129 USB_BUS_LOCK_ASSERT(info->bus, MA_OWNED); 2130 if (!mtx_owned(info->xfer_mtx)) { 2131 /* 2132 * Cases that end up here: 2133 * 2134 * 5) HW interrupt done callback or other source. 2135 */ 2136 DPRINTFN(3, "case 5\n"); 2137 2138 /* 2139 * We have to postpone the callback due to the fact we 2140 * will have a Lock Order Reversal, LOR, if we try to 2141 * proceed ! 2142 */ 2143 if (usb_proc_msignal(info->done_p, 2144 &info->done_m[0], &info->done_m[1])) { 2145 /* ignore */ 2146 } 2147 return; 2148 } 2149 /* 2150 * Cases that end up here: 2151 * 2152 * 1) We are starting a transfer 2153 * 2) We are prematurely calling back a transfer 2154 * 3) We are stopping a transfer 2155 * 4) We are doing an ordinary callback 2156 */ 2157 DPRINTFN(3, "case 1-4\n"); 2158 /* get next USB transfer in the queue */ 2159 info->done_q.curr = NULL; 2160 2161 /* set flag in case of drain */ 2162 xfer->flags_int.doing_callback = 1; 2163 2164 USB_BUS_UNLOCK(info->bus); 2165 USB_BUS_LOCK_ASSERT(info->bus, MA_NOTOWNED); 2166 2167 /* set correct USB state for callback */ 2168 if (!xfer->flags_int.transferring) { 2169 xfer->usb_state = USB_ST_SETUP; 2170 if (!xfer->flags_int.started) { 2171 /* we got stopped before we even got started */ 2172 USB_BUS_LOCK(info->bus); 2173 goto done; 2174 } 2175 } else { 2176 2177 if (usbd_callback_wrapper_sub(xfer)) { 2178 /* the callback has been deferred */ 2179 USB_BUS_LOCK(info->bus); 2180 goto done; 2181 } 2182#if USB_HAVE_POWERD 2183 /* decrement power reference */ 2184 usbd_transfer_power_ref(xfer, -1); 2185#endif 2186 xfer->flags_int.transferring = 0; 2187 2188 if (xfer->error) { 2189 xfer->usb_state = USB_ST_ERROR; 2190 } else { 2191 /* set transferred state */ 2192 xfer->usb_state = USB_ST_TRANSFERRED; 2193#if USB_HAVE_BUSDMA 2194 /* sync DMA memory, if any */ 2195 if (xfer->flags_int.bdma_enable && 2196 (!xfer->flags_int.bdma_no_post_sync)) { 2197 usb_bdma_post_sync(xfer); 2198 } 2199#endif 2200 } 2201 } 2202 2203#if USB_HAVE_PF 2204 if (xfer->usb_state != USB_ST_SETUP) 2205 usbpf_xfertap(xfer, USBPF_XFERTAP_DONE); 2206#endif 2207 /* call processing routine */ 2208 (xfer->callback) (xfer, xfer->error); 2209 2210 /* pickup the USB mutex again */ 2211 USB_BUS_LOCK(info->bus); 2212 2213 /* 2214 * Check if we got started after that we got cancelled, but 2215 * before we managed to do the callback. 2216 */ 2217 if ((!xfer->flags_int.open) && 2218 (xfer->flags_int.started) && 2219 (xfer->usb_state == USB_ST_ERROR)) { 2220 /* clear flag in case of drain */ 2221 xfer->flags_int.doing_callback = 0; 2222 /* try to loop, but not recursivly */ 2223 usb_command_wrapper(&info->done_q, xfer); 2224 return; 2225 } 2226 2227done: 2228 /* clear flag in case of drain */ 2229 xfer->flags_int.doing_callback = 0; 2230 2231 /* 2232 * Check if we are draining. 2233 */ 2234 if (xfer->flags_int.draining && 2235 (!xfer->flags_int.transferring)) { 2236 /* "usbd_transfer_drain()" is waiting for end of transfer */ 2237 xfer->flags_int.draining = 0; 2238 cv_broadcast(&info->cv_drain); 2239 } 2240 2241 /* do the next callback, if any */ 2242 usb_command_wrapper(&info->done_q, 2243 info->done_q.curr); 2244} 2245 2246/*------------------------------------------------------------------------* 2247 * usb_dma_delay_done_cb 2248 * 2249 * This function is called when the DMA delay has been exectuded, and 2250 * will make sure that the callback is called to complete the USB 2251 * transfer. This code path is ususally only used when there is an USB 2252 * error like USB_ERR_CANCELLED. 2253 *------------------------------------------------------------------------*/ 2254void 2255usb_dma_delay_done_cb(struct usb_xfer *xfer) 2256{ 2257 USB_BUS_LOCK_ASSERT(xfer->xroot->bus, MA_OWNED); 2258 2259 DPRINTFN(3, "Completed %p\n", xfer); 2260 2261 /* queue callback for execution, again */ 2262 usbd_transfer_done(xfer, 0); 2263} 2264 2265/*------------------------------------------------------------------------* 2266 * usbd_transfer_dequeue 2267 * 2268 * - This function is used to remove an USB transfer from a USB 2269 * transfer queue. 2270 * 2271 * - This function can be called multiple times in a row. 2272 *------------------------------------------------------------------------*/ 2273void 2274usbd_transfer_dequeue(struct usb_xfer *xfer) 2275{ 2276 struct usb_xfer_queue *pq; 2277 2278 pq = xfer->wait_queue; 2279 if (pq) { 2280 TAILQ_REMOVE(&pq->head, xfer, wait_entry); 2281 xfer->wait_queue = NULL; 2282 } 2283} 2284 2285/*------------------------------------------------------------------------* 2286 * usbd_transfer_enqueue 2287 * 2288 * - This function is used to insert an USB transfer into a USB * 2289 * transfer queue. 2290 * 2291 * - This function can be called multiple times in a row. 2292 *------------------------------------------------------------------------*/ 2293void 2294usbd_transfer_enqueue(struct usb_xfer_queue *pq, struct usb_xfer *xfer) 2295{ 2296 /* 2297 * Insert the USB transfer into the queue, if it is not 2298 * already on a USB transfer queue: 2299 */ 2300 if (xfer->wait_queue == NULL) { 2301 xfer->wait_queue = pq; 2302 TAILQ_INSERT_TAIL(&pq->head, xfer, wait_entry); 2303 } 2304} 2305 2306/*------------------------------------------------------------------------* 2307 * usbd_transfer_done 2308 * 2309 * - This function is used to remove an USB transfer from the busdma, 2310 * pipe or interrupt queue. 2311 * 2312 * - This function is used to queue the USB transfer on the done 2313 * queue. 2314 * 2315 * - This function is used to stop any USB transfer timeouts. 2316 *------------------------------------------------------------------------*/ 2317void 2318usbd_transfer_done(struct usb_xfer *xfer, usb_error_t error) 2319{ 2320 USB_BUS_LOCK_ASSERT(xfer->xroot->bus, MA_OWNED); 2321 2322 DPRINTF("err=%s\n", usbd_errstr(error)); 2323 2324 /* 2325 * If we are not transferring then just return. 2326 * This can happen during transfer cancel. 2327 */ 2328 if (!xfer->flags_int.transferring) { 2329 DPRINTF("not transferring\n"); 2330 /* end of control transfer, if any */ 2331 xfer->flags_int.control_act = 0; 2332 return; 2333 } 2334 /* only set transfer error if not already set */ 2335 if (!xfer->error) { 2336 xfer->error = error; 2337 } 2338 /* stop any callouts */ 2339 usb_callout_stop(&xfer->timeout_handle); 2340 2341 /* 2342 * If we are waiting on a queue, just remove the USB transfer 2343 * from the queue, if any. We should have the required locks 2344 * locked to do the remove when this function is called. 2345 */ 2346 usbd_transfer_dequeue(xfer); 2347 2348#if USB_HAVE_BUSDMA 2349 if (mtx_owned(xfer->xroot->xfer_mtx)) { 2350 struct usb_xfer_queue *pq; 2351 2352 /* 2353 * If the private USB lock is not locked, then we assume 2354 * that the BUS-DMA load stage has been passed: 2355 */ 2356 pq = &xfer->xroot->dma_q; 2357 2358 if (pq->curr == xfer) { 2359 /* start the next BUS-DMA load, if any */ 2360 usb_command_wrapper(pq, NULL); 2361 } 2362 } 2363#endif 2364 /* keep some statistics */ 2365 if (xfer->error) { 2366 xfer->xroot->bus->stats_err.uds_requests 2367 [xfer->endpoint->edesc->bmAttributes & UE_XFERTYPE]++; 2368 } else { 2369 xfer->xroot->bus->stats_ok.uds_requests 2370 [xfer->endpoint->edesc->bmAttributes & UE_XFERTYPE]++; 2371 } 2372 2373 /* call the USB transfer callback */ 2374 usbd_callback_ss_done_defer(xfer); 2375} 2376 2377/*------------------------------------------------------------------------* 2378 * usbd_transfer_start_cb 2379 * 2380 * This function is called to start the USB transfer when 2381 * "xfer->interval" is greater than zero, and and the endpoint type is 2382 * BULK or CONTROL. 2383 *------------------------------------------------------------------------*/ 2384static void 2385usbd_transfer_start_cb(void *arg) 2386{ 2387 struct usb_xfer *xfer = arg; 2388 struct usb_endpoint *ep = xfer->endpoint; 2389 2390 USB_BUS_LOCK_ASSERT(xfer->xroot->bus, MA_OWNED); 2391 2392 DPRINTF("start\n"); 2393 2394#if USB_HAVE_PF 2395 usbpf_xfertap(xfer, USBPF_XFERTAP_SUBMIT); 2396#endif 2397 /* start the transfer */ 2398 (ep->methods->start) (xfer); 2399 2400 xfer->flags_int.can_cancel_immed = 1; 2401 2402 /* check for error */ 2403 if (xfer->error) { 2404 /* some error has happened */ 2405 usbd_transfer_done(xfer, 0); 2406 } 2407} 2408 2409/*------------------------------------------------------------------------* 2410 * usbd_xfer_set_stall 2411 * 2412 * This function is used to set the stall flag outside the 2413 * callback. This function is NULL safe. 2414 *------------------------------------------------------------------------*/ 2415void 2416usbd_xfer_set_stall(struct usb_xfer *xfer) 2417{ 2418 if (xfer == NULL) { 2419 /* tearing down */ 2420 return; 2421 } 2422 USB_XFER_LOCK_ASSERT(xfer, MA_OWNED); 2423 2424 /* avoid any races by locking the USB mutex */ 2425 USB_BUS_LOCK(xfer->xroot->bus); 2426 xfer->flags.stall_pipe = 1; 2427 USB_BUS_UNLOCK(xfer->xroot->bus); 2428} 2429 2430int 2431usbd_xfer_is_stalled(struct usb_xfer *xfer) 2432{ 2433 return (xfer->endpoint->is_stalled); 2434} 2435 2436/*------------------------------------------------------------------------* 2437 * usbd_transfer_clear_stall 2438 * 2439 * This function is used to clear the stall flag outside the 2440 * callback. This function is NULL safe. 2441 *------------------------------------------------------------------------*/ 2442void 2443usbd_transfer_clear_stall(struct usb_xfer *xfer) 2444{ 2445 if (xfer == NULL) { 2446 /* tearing down */ 2447 return; 2448 } 2449 USB_XFER_LOCK_ASSERT(xfer, MA_OWNED); 2450 2451 /* avoid any races by locking the USB mutex */ 2452 USB_BUS_LOCK(xfer->xroot->bus); 2453 2454 xfer->flags.stall_pipe = 0; 2455 2456 USB_BUS_UNLOCK(xfer->xroot->bus); 2457} 2458 2459/*------------------------------------------------------------------------* 2460 * usbd_pipe_start 2461 * 2462 * This function is used to add an USB transfer to the pipe transfer list. 2463 *------------------------------------------------------------------------*/ 2464void 2465usbd_pipe_start(struct usb_xfer_queue *pq) 2466{ 2467 struct usb_endpoint *ep; 2468 struct usb_xfer *xfer; 2469 uint8_t type; 2470 2471 xfer = pq->curr; 2472 ep = xfer->endpoint; 2473 2474 USB_BUS_LOCK_ASSERT(xfer->xroot->bus, MA_OWNED); 2475 2476 /* 2477 * If the endpoint is already stalled we do nothing ! 2478 */ 2479 if (ep->is_stalled) { 2480 return; 2481 } 2482 /* 2483 * Check if we are supposed to stall the endpoint: 2484 */ 2485 if (xfer->flags.stall_pipe) { 2486 struct usb_device *udev; 2487 struct usb_xfer_root *info; 2488 2489 /* clear stall command */ 2490 xfer->flags.stall_pipe = 0; 2491 2492 /* get pointer to USB device */ 2493 info = xfer->xroot; 2494 udev = info->udev; 2495 2496 /* 2497 * Only stall BULK and INTERRUPT endpoints. 2498 */ 2499 type = (ep->edesc->bmAttributes & UE_XFERTYPE); 2500 if ((type == UE_BULK) || 2501 (type == UE_INTERRUPT)) { 2502 uint8_t did_stall; 2503 2504 did_stall = 1; 2505 2506 if (udev->flags.usb_mode == USB_MODE_DEVICE) { 2507 (udev->bus->methods->set_stall) ( 2508 udev, NULL, ep, &did_stall); 2509 } else if (udev->ctrl_xfer[1]) { 2510 info = udev->ctrl_xfer[1]->xroot; 2511 usb_proc_msignal( 2512 &info->bus->non_giant_callback_proc, 2513 &udev->cs_msg[0], &udev->cs_msg[1]); 2514 } else { 2515 /* should not happen */ 2516 DPRINTFN(0, "No stall handler\n"); 2517 } 2518 /* 2519 * Check if we should stall. Some USB hardware 2520 * handles set- and clear-stall in hardware. 2521 */ 2522 if (did_stall) { 2523 /* 2524 * The transfer will be continued when 2525 * the clear-stall control endpoint 2526 * message is received. 2527 */ 2528 ep->is_stalled = 1; 2529 return; 2530 } 2531 } else if (type == UE_ISOCHRONOUS) { 2532 2533 /* 2534 * Make sure any FIFO overflow or other FIFO 2535 * error conditions go away by resetting the 2536 * endpoint FIFO through the clear stall 2537 * method. 2538 */ 2539 if (udev->flags.usb_mode == USB_MODE_DEVICE) { 2540 (udev->bus->methods->clear_stall) (udev, ep); 2541 } 2542 } 2543 } 2544 /* Set or clear stall complete - special case */ 2545 if (xfer->nframes == 0) { 2546 /* we are complete */ 2547 xfer->aframes = 0; 2548 usbd_transfer_done(xfer, 0); 2549 return; 2550 } 2551 /* 2552 * Handled cases: 2553 * 2554 * 1) Start the first transfer queued. 2555 * 2556 * 2) Re-start the current USB transfer. 2557 */ 2558 /* 2559 * Check if there should be any 2560 * pre transfer start delay: 2561 */ 2562 if (xfer->interval > 0) { 2563 type = (ep->edesc->bmAttributes & UE_XFERTYPE); 2564 if ((type == UE_BULK) || 2565 (type == UE_CONTROL)) { 2566 usbd_transfer_timeout_ms(xfer, 2567 &usbd_transfer_start_cb, 2568 xfer->interval); 2569 return; 2570 } 2571 } 2572 DPRINTF("start\n"); 2573 2574#if USB_HAVE_PF 2575 usbpf_xfertap(xfer, USBPF_XFERTAP_SUBMIT); 2576#endif 2577 /* start USB transfer */ 2578 (ep->methods->start) (xfer); 2579 2580 xfer->flags_int.can_cancel_immed = 1; 2581 2582 /* check for error */ 2583 if (xfer->error) { 2584 /* some error has happened */ 2585 usbd_transfer_done(xfer, 0); 2586 } 2587} 2588 2589/*------------------------------------------------------------------------* 2590 * usbd_transfer_timeout_ms 2591 * 2592 * This function is used to setup a timeout on the given USB 2593 * transfer. If the timeout has been deferred the callback given by 2594 * "cb" will get called after "ms" milliseconds. 2595 *------------------------------------------------------------------------*/ 2596void 2597usbd_transfer_timeout_ms(struct usb_xfer *xfer, 2598 void (*cb) (void *arg), usb_timeout_t ms) 2599{ 2600 USB_BUS_LOCK_ASSERT(xfer->xroot->bus, MA_OWNED); 2601 2602 /* defer delay */ 2603 usb_callout_reset(&xfer->timeout_handle, 2604 USB_MS_TO_TICKS(ms), cb, xfer); 2605} 2606 2607/*------------------------------------------------------------------------* 2608 * usbd_callback_wrapper_sub 2609 * 2610 * - This function will update variables in an USB transfer after 2611 * that the USB transfer is complete. 2612 * 2613 * - This function is used to start the next USB transfer on the 2614 * ep transfer queue, if any. 2615 * 2616 * NOTE: In some special cases the USB transfer will not be removed from 2617 * the pipe queue, but remain first. To enforce USB transfer removal call 2618 * this function passing the error code "USB_ERR_CANCELLED". 2619 * 2620 * Return values: 2621 * 0: Success. 2622 * Else: The callback has been deferred. 2623 *------------------------------------------------------------------------*/ 2624static uint8_t 2625usbd_callback_wrapper_sub(struct usb_xfer *xfer) 2626{ 2627 struct usb_endpoint *ep; 2628 struct usb_bus *bus; 2629 usb_frcount_t x; 2630 2631 bus = xfer->xroot->bus; 2632 2633 if ((!xfer->flags_int.open) && 2634 (!xfer->flags_int.did_close)) { 2635 DPRINTF("close\n"); 2636 USB_BUS_LOCK(bus); 2637 (xfer->endpoint->methods->close) (xfer); 2638 USB_BUS_UNLOCK(bus); 2639 /* only close once */ 2640 xfer->flags_int.did_close = 1; 2641 return (1); /* wait for new callback */ 2642 } 2643 /* 2644 * If we have a non-hardware induced error we 2645 * need to do the DMA delay! 2646 */ 2647 if (xfer->error != 0 && !xfer->flags_int.did_dma_delay && 2648 (xfer->error == USB_ERR_CANCELLED || 2649 xfer->error == USB_ERR_TIMEOUT || 2650 bus->methods->start_dma_delay != NULL)) { 2651 2652 usb_timeout_t temp; 2653 2654 /* only delay once */ 2655 xfer->flags_int.did_dma_delay = 1; 2656 2657 /* we can not cancel this delay */ 2658 xfer->flags_int.can_cancel_immed = 0; 2659 2660 temp = usbd_get_dma_delay(xfer->xroot->udev); 2661 2662 DPRINTFN(3, "DMA delay, %u ms, " 2663 "on %p\n", temp, xfer); 2664 2665 if (temp != 0) { 2666 USB_BUS_LOCK(bus); 2667 /* 2668 * Some hardware solutions have dedicated 2669 * events when it is safe to free DMA'ed 2670 * memory. For the other hardware platforms we 2671 * use a static delay. 2672 */ 2673 if (bus->methods->start_dma_delay != NULL) { 2674 (bus->methods->start_dma_delay) (xfer); 2675 } else { 2676 usbd_transfer_timeout_ms(xfer, 2677 (void *)&usb_dma_delay_done_cb, temp); 2678 } 2679 USB_BUS_UNLOCK(bus); 2680 return (1); /* wait for new callback */ 2681 } 2682 } 2683 /* check actual number of frames */ 2684 if (xfer->aframes > xfer->nframes) { 2685 if (xfer->error == 0) { 2686 panic("%s: actual number of frames, %d, is " 2687 "greater than initial number of frames, %d\n", 2688 __FUNCTION__, xfer->aframes, xfer->nframes); 2689 } else { 2690 /* just set some valid value */ 2691 xfer->aframes = xfer->nframes; 2692 } 2693 } 2694 /* compute actual length */ 2695 xfer->actlen = 0; 2696 2697 for (x = 0; x != xfer->aframes; x++) { 2698 xfer->actlen += xfer->frlengths[x]; 2699 } 2700 2701 /* 2702 * Frames that were not transferred get zero actual length in 2703 * case the USB device driver does not check the actual number 2704 * of frames transferred, "xfer->aframes": 2705 */ 2706 for (; x < xfer->nframes; x++) { 2707 usbd_xfer_set_frame_len(xfer, x, 0); 2708 } 2709 2710 /* check actual length */ 2711 if (xfer->actlen > xfer->sumlen) { 2712 if (xfer->error == 0) { 2713 panic("%s: actual length, %d, is greater than " 2714 "initial length, %d\n", 2715 __FUNCTION__, xfer->actlen, xfer->sumlen); 2716 } else { 2717 /* just set some valid value */ 2718 xfer->actlen = xfer->sumlen; 2719 } 2720 } 2721 DPRINTFN(1, "xfer=%p endpoint=%p sts=%d alen=%d, slen=%d, afrm=%d, nfrm=%d\n", 2722 xfer, xfer->endpoint, xfer->error, xfer->actlen, xfer->sumlen, 2723 xfer->aframes, xfer->nframes); 2724 2725 if (xfer->error) { 2726 /* end of control transfer, if any */ 2727 xfer->flags_int.control_act = 0; 2728 2729 /* check if we should block the execution queue */ 2730 if ((xfer->error != USB_ERR_CANCELLED) && 2731 (xfer->flags.pipe_bof)) { 2732 DPRINTFN(2, "xfer=%p: Block On Failure " 2733 "on endpoint=%p\n", xfer, xfer->endpoint); 2734 goto done; 2735 } 2736 } else { 2737 /* check for short transfers */ 2738 if (xfer->actlen < xfer->sumlen) { 2739 2740 /* end of control transfer, if any */ 2741 xfer->flags_int.control_act = 0; 2742 2743 if (!xfer->flags_int.short_xfer_ok) { 2744 xfer->error = USB_ERR_SHORT_XFER; 2745 if (xfer->flags.pipe_bof) { 2746 DPRINTFN(2, "xfer=%p: Block On Failure on " 2747 "Short Transfer on endpoint %p.\n", 2748 xfer, xfer->endpoint); 2749 goto done; 2750 } 2751 } 2752 } else { 2753 /* 2754 * Check if we are in the middle of a 2755 * control transfer: 2756 */ 2757 if (xfer->flags_int.control_act) { 2758 DPRINTFN(5, "xfer=%p: Control transfer " 2759 "active on endpoint=%p\n", xfer, xfer->endpoint); 2760 goto done; 2761 } 2762 } 2763 } 2764 2765 ep = xfer->endpoint; 2766 2767 /* 2768 * If the current USB transfer is completing we need to start the 2769 * next one: 2770 */ 2771 USB_BUS_LOCK(bus); 2772 if (ep->endpoint_q.curr == xfer) { 2773 usb_command_wrapper(&ep->endpoint_q, NULL); 2774 2775 if (ep->endpoint_q.curr || TAILQ_FIRST(&ep->endpoint_q.head)) { 2776 /* there is another USB transfer waiting */ 2777 } else { 2778 /* this is the last USB transfer */ 2779 /* clear isochronous sync flag */ 2780 xfer->endpoint->is_synced = 0; 2781 } 2782 } 2783 USB_BUS_UNLOCK(bus); 2784done: 2785 return (0); 2786} 2787 2788/*------------------------------------------------------------------------* 2789 * usb_command_wrapper 2790 * 2791 * This function is used to execute commands non-recursivly on an USB 2792 * transfer. 2793 *------------------------------------------------------------------------*/ 2794void 2795usb_command_wrapper(struct usb_xfer_queue *pq, struct usb_xfer *xfer) 2796{ 2797 if (xfer) { 2798 /* 2799 * If the transfer is not already processing, 2800 * queue it! 2801 */ 2802 if (pq->curr != xfer) { 2803 usbd_transfer_enqueue(pq, xfer); 2804 if (pq->curr != NULL) { 2805 /* something is already processing */ 2806 DPRINTFN(6, "busy %p\n", pq->curr); 2807 return; 2808 } 2809 } 2810 } else { 2811 /* Get next element in queue */ 2812 pq->curr = NULL; 2813 } 2814 2815 if (!pq->recurse_1) { 2816 2817 do { 2818 2819 /* set both recurse flags */ 2820 pq->recurse_1 = 1; 2821 pq->recurse_2 = 1; 2822 2823 if (pq->curr == NULL) { 2824 xfer = TAILQ_FIRST(&pq->head); 2825 if (xfer) { 2826 TAILQ_REMOVE(&pq->head, xfer, 2827 wait_entry); 2828 xfer->wait_queue = NULL; 2829 pq->curr = xfer; 2830 } else { 2831 break; 2832 } 2833 } 2834 DPRINTFN(6, "cb %p (enter)\n", pq->curr); 2835 (pq->command) (pq); 2836 DPRINTFN(6, "cb %p (leave)\n", pq->curr); 2837 2838 } while (!pq->recurse_2); 2839 2840 /* clear first recurse flag */ 2841 pq->recurse_1 = 0; 2842 2843 } else { 2844 /* clear second recurse flag */ 2845 pq->recurse_2 = 0; 2846 } 2847} 2848 2849/*------------------------------------------------------------------------* 2850 * usbd_ctrl_transfer_setup 2851 * 2852 * This function is used to setup the default USB control endpoint 2853 * transfer. 2854 *------------------------------------------------------------------------*/ 2855void 2856usbd_ctrl_transfer_setup(struct usb_device *udev) 2857{ 2858 struct usb_xfer *xfer; 2859 uint8_t no_resetup; 2860 uint8_t iface_index; 2861 2862 /* check for root HUB */ 2863 if (udev->parent_hub == NULL) 2864 return; 2865repeat: 2866 2867 xfer = udev->ctrl_xfer[0]; 2868 if (xfer) { 2869 USB_XFER_LOCK(xfer); 2870 no_resetup = 2871 ((xfer->address == udev->address) && 2872 (udev->ctrl_ep_desc.wMaxPacketSize[0] == 2873 udev->ddesc.bMaxPacketSize)); 2874 if (udev->flags.usb_mode == USB_MODE_DEVICE) { 2875 if (no_resetup) { 2876 /* 2877 * NOTE: checking "xfer->address" and 2878 * starting the USB transfer must be 2879 * atomic! 2880 */ 2881 usbd_transfer_start(xfer); 2882 } 2883 } 2884 USB_XFER_UNLOCK(xfer); 2885 } else { 2886 no_resetup = 0; 2887 } 2888 2889 if (no_resetup) { 2890 /* 2891 * All parameters are exactly the same like before. 2892 * Just return. 2893 */ 2894 return; 2895 } 2896 /* 2897 * Update wMaxPacketSize for the default control endpoint: 2898 */ 2899 udev->ctrl_ep_desc.wMaxPacketSize[0] = 2900 udev->ddesc.bMaxPacketSize; 2901 2902 /* 2903 * Unsetup any existing USB transfer: 2904 */ 2905 usbd_transfer_unsetup(udev->ctrl_xfer, USB_CTRL_XFER_MAX); 2906 2907 /* 2908 * Try to setup a new USB transfer for the 2909 * default control endpoint: 2910 */ 2911 iface_index = 0; 2912 if (usbd_transfer_setup(udev, &iface_index, 2913 udev->ctrl_xfer, usb_control_ep_cfg, USB_CTRL_XFER_MAX, NULL, 2914 &udev->device_mtx)) { 2915 DPRINTFN(0, "could not setup default " 2916 "USB transfer\n"); 2917 } else { 2918 goto repeat; 2919 } 2920} 2921 2922/*------------------------------------------------------------------------* 2923 * usbd_clear_data_toggle - factored out code 2924 * 2925 * NOTE: the intention of this function is not to reset the hardware 2926 * data toggle. 2927 *------------------------------------------------------------------------*/ 2928void 2929usbd_clear_stall_locked(struct usb_device *udev, struct usb_endpoint *ep) 2930{ 2931 USB_BUS_LOCK_ASSERT(udev->bus, MA_OWNED); 2932 2933 /* check that we have a valid case */ 2934 if (udev->flags.usb_mode == USB_MODE_HOST && 2935 udev->parent_hub != NULL && 2936 udev->bus->methods->clear_stall != NULL && 2937 ep->methods != NULL) { 2938 (udev->bus->methods->clear_stall) (udev, ep); 2939 } 2940} 2941 2942/*------------------------------------------------------------------------* 2943 * usbd_clear_data_toggle - factored out code 2944 * 2945 * NOTE: the intention of this function is not to reset the hardware 2946 * data toggle on the USB device side. 2947 *------------------------------------------------------------------------*/ 2948void 2949usbd_clear_data_toggle(struct usb_device *udev, struct usb_endpoint *ep) 2950{ 2951 DPRINTFN(5, "udev=%p endpoint=%p\n", udev, ep); 2952 2953 USB_BUS_LOCK(udev->bus); 2954 ep->toggle_next = 0; 2955 /* some hardware needs a callback to clear the data toggle */ 2956 usbd_clear_stall_locked(udev, ep); 2957 USB_BUS_UNLOCK(udev->bus); 2958} 2959 2960/*------------------------------------------------------------------------* 2961 * usbd_clear_stall_callback - factored out clear stall callback 2962 * 2963 * Input parameters: 2964 * xfer1: Clear Stall Control Transfer 2965 * xfer2: Stalled USB Transfer 2966 * 2967 * This function is NULL safe. 2968 * 2969 * Return values: 2970 * 0: In progress 2971 * Else: Finished 2972 * 2973 * Clear stall config example: 2974 * 2975 * static const struct usb_config my_clearstall = { 2976 * .type = UE_CONTROL, 2977 * .endpoint = 0, 2978 * .direction = UE_DIR_ANY, 2979 * .interval = 50, //50 milliseconds 2980 * .bufsize = sizeof(struct usb_device_request), 2981 * .timeout = 1000, //1.000 seconds 2982 * .callback = &my_clear_stall_callback, // ** 2983 * .usb_mode = USB_MODE_HOST, 2984 * }; 2985 * 2986 * ** "my_clear_stall_callback" calls "usbd_clear_stall_callback" 2987 * passing the correct parameters. 2988 *------------------------------------------------------------------------*/ 2989uint8_t 2990usbd_clear_stall_callback(struct usb_xfer *xfer1, 2991 struct usb_xfer *xfer2) 2992{ 2993 struct usb_device_request req; 2994 2995 if (xfer2 == NULL) { 2996 /* looks like we are tearing down */ 2997 DPRINTF("NULL input parameter\n"); 2998 return (0); 2999 } 3000 USB_XFER_LOCK_ASSERT(xfer1, MA_OWNED); 3001 USB_XFER_LOCK_ASSERT(xfer2, MA_OWNED); 3002 3003 switch (USB_GET_STATE(xfer1)) { 3004 case USB_ST_SETUP: 3005 3006 /* 3007 * pre-clear the data toggle to DATA0 ("umass.c" and 3008 * "ata-usb.c" depends on this) 3009 */ 3010 3011 usbd_clear_data_toggle(xfer2->xroot->udev, xfer2->endpoint); 3012 3013 /* setup a clear-stall packet */ 3014 3015 req.bmRequestType = UT_WRITE_ENDPOINT; 3016 req.bRequest = UR_CLEAR_FEATURE; 3017 USETW(req.wValue, UF_ENDPOINT_HALT); 3018 req.wIndex[0] = xfer2->endpoint->edesc->bEndpointAddress; 3019 req.wIndex[1] = 0; 3020 USETW(req.wLength, 0); 3021 3022 /* 3023 * "usbd_transfer_setup_sub()" will ensure that 3024 * we have sufficient room in the buffer for 3025 * the request structure! 3026 */ 3027 3028 /* copy in the transfer */ 3029 3030 usbd_copy_in(xfer1->frbuffers, 0, &req, sizeof(req)); 3031 3032 /* set length */ 3033 xfer1->frlengths[0] = sizeof(req); 3034 xfer1->nframes = 1; 3035 3036 usbd_transfer_submit(xfer1); 3037 return (0); 3038 3039 case USB_ST_TRANSFERRED: 3040 break; 3041 3042 default: /* Error */ 3043 if (xfer1->error == USB_ERR_CANCELLED) { 3044 return (0); 3045 } 3046 break; 3047 } 3048 return (1); /* Clear Stall Finished */ 3049} 3050 3051/*------------------------------------------------------------------------* 3052 * usbd_transfer_poll 3053 * 3054 * The following function gets called from the USB keyboard driver and 3055 * UMASS when the system has paniced. 3056 * 3057 * NOTE: It is currently not possible to resume normal operation on 3058 * the USB controller which has been polled, due to clearing of the 3059 * "up_dsleep" and "up_msleep" flags. 3060 *------------------------------------------------------------------------*/ 3061void 3062usbd_transfer_poll(struct usb_xfer **ppxfer, uint16_t max) 3063{ 3064 struct usb_xfer *xfer; 3065 struct usb_xfer_root *xroot; 3066 struct usb_device *udev; 3067 struct usb_proc_msg *pm; 3068 uint16_t n; 3069 uint16_t drop_bus; 3070 uint16_t drop_xfer; 3071 3072 for (n = 0; n != max; n++) { 3073 /* Extra checks to avoid panic */ 3074 xfer = ppxfer[n]; 3075 if (xfer == NULL) 3076 continue; /* no USB transfer */ 3077 xroot = xfer->xroot; 3078 if (xroot == NULL) 3079 continue; /* no USB root */ 3080 udev = xroot->udev; 3081 if (udev == NULL) 3082 continue; /* no USB device */ 3083 if (udev->bus == NULL) 3084 continue; /* no BUS structure */ 3085 if (udev->bus->methods == NULL) 3086 continue; /* no BUS methods */ 3087 if (udev->bus->methods->xfer_poll == NULL) 3088 continue; /* no poll method */ 3089 3090 /* make sure that the BUS mutex is not locked */ 3091 drop_bus = 0; 3092 while (mtx_owned(&xroot->udev->bus->bus_mtx)) { 3093 mtx_unlock(&xroot->udev->bus->bus_mtx); 3094 drop_bus++; 3095 } 3096 3097 /* make sure that the transfer mutex is not locked */ 3098 drop_xfer = 0; 3099 while (mtx_owned(xroot->xfer_mtx)) { 3100 mtx_unlock(xroot->xfer_mtx); 3101 drop_xfer++; 3102 } 3103 3104 /* Make sure cv_signal() and cv_broadcast() is not called */ 3105 udev->bus->control_xfer_proc.up_msleep = 0; 3106 udev->bus->explore_proc.up_msleep = 0; 3107 udev->bus->giant_callback_proc.up_msleep = 0; 3108 udev->bus->non_giant_callback_proc.up_msleep = 0; 3109 3110 /* poll USB hardware */ 3111 (udev->bus->methods->xfer_poll) (udev->bus); 3112 3113 USB_BUS_LOCK(xroot->bus); 3114 3115 /* check for clear stall */ 3116 if (udev->ctrl_xfer[1] != NULL) { 3117 3118 /* poll clear stall start */ 3119 pm = &udev->cs_msg[0].hdr; 3120 (pm->pm_callback) (pm); 3121 /* poll clear stall done thread */ 3122 pm = &udev->ctrl_xfer[1]-> 3123 xroot->done_m[0].hdr; 3124 (pm->pm_callback) (pm); 3125 } 3126 3127 /* poll done thread */ 3128 pm = &xroot->done_m[0].hdr; 3129 (pm->pm_callback) (pm); 3130 3131 USB_BUS_UNLOCK(xroot->bus); 3132 3133 /* restore transfer mutex */ 3134 while (drop_xfer--) 3135 mtx_lock(xroot->xfer_mtx); 3136 3137 /* restore BUS mutex */ 3138 while (drop_bus--) 3139 mtx_lock(&xroot->udev->bus->bus_mtx); 3140 } 3141} 3142 3143static void 3144usbd_get_std_packet_size(struct usb_std_packet_size *ptr, 3145 uint8_t type, enum usb_dev_speed speed) 3146{ 3147 static const uint16_t intr_range_max[USB_SPEED_MAX] = { 3148 [USB_SPEED_LOW] = 8, 3149 [USB_SPEED_FULL] = 64, 3150 [USB_SPEED_HIGH] = 1024, 3151 [USB_SPEED_VARIABLE] = 1024, 3152 [USB_SPEED_SUPER] = 1024, 3153 }; 3154 3155 static const uint16_t isoc_range_max[USB_SPEED_MAX] = { 3156 [USB_SPEED_LOW] = 0, /* invalid */ 3157 [USB_SPEED_FULL] = 1023, 3158 [USB_SPEED_HIGH] = 1024, 3159 [USB_SPEED_VARIABLE] = 3584, 3160 [USB_SPEED_SUPER] = 1024, 3161 }; 3162 3163 static const uint16_t control_min[USB_SPEED_MAX] = { 3164 [USB_SPEED_LOW] = 8, 3165 [USB_SPEED_FULL] = 8, 3166 [USB_SPEED_HIGH] = 64, 3167 [USB_SPEED_VARIABLE] = 512, 3168 [USB_SPEED_SUPER] = 512, 3169 }; 3170 3171 static const uint16_t bulk_min[USB_SPEED_MAX] = { 3172 [USB_SPEED_LOW] = 8, 3173 [USB_SPEED_FULL] = 8, 3174 [USB_SPEED_HIGH] = 512, 3175 [USB_SPEED_VARIABLE] = 512, 3176 [USB_SPEED_SUPER] = 1024, 3177 }; 3178 3179 uint16_t temp; 3180 3181 memset(ptr, 0, sizeof(*ptr)); 3182 3183 switch (type) { 3184 case UE_INTERRUPT: 3185 ptr->range.max = intr_range_max[speed]; 3186 break; 3187 case UE_ISOCHRONOUS: 3188 ptr->range.max = isoc_range_max[speed]; 3189 break; 3190 default: 3191 if (type == UE_BULK) 3192 temp = bulk_min[speed]; 3193 else /* UE_CONTROL */ 3194 temp = control_min[speed]; 3195 3196 /* default is fixed */ 3197 ptr->fixed[0] = temp; 3198 ptr->fixed[1] = temp; 3199 ptr->fixed[2] = temp; 3200 ptr->fixed[3] = temp; 3201 3202 if (speed == USB_SPEED_FULL) { 3203 /* multiple sizes */ 3204 ptr->fixed[1] = 16; 3205 ptr->fixed[2] = 32; 3206 ptr->fixed[3] = 64; 3207 } 3208 if ((speed == USB_SPEED_VARIABLE) && 3209 (type == UE_BULK)) { 3210 /* multiple sizes */ 3211 ptr->fixed[2] = 1024; 3212 ptr->fixed[3] = 1536; 3213 } 3214 break; 3215 } 3216} 3217 3218void * 3219usbd_xfer_softc(struct usb_xfer *xfer) 3220{ 3221 return (xfer->priv_sc); 3222} 3223 3224void * 3225usbd_xfer_get_priv(struct usb_xfer *xfer) 3226{ 3227 return (xfer->priv_fifo); 3228} 3229 3230void 3231usbd_xfer_set_priv(struct usb_xfer *xfer, void *ptr) 3232{ 3233 xfer->priv_fifo = ptr; 3234} 3235 3236uint8_t 3237usbd_xfer_state(struct usb_xfer *xfer) 3238{ 3239 return (xfer->usb_state); 3240} 3241 3242void 3243usbd_xfer_set_flag(struct usb_xfer *xfer, int flag) 3244{ 3245 switch (flag) { 3246 case USB_FORCE_SHORT_XFER: 3247 xfer->flags.force_short_xfer = 1; 3248 break; 3249 case USB_SHORT_XFER_OK: 3250 xfer->flags.short_xfer_ok = 1; 3251 break; 3252 case USB_MULTI_SHORT_OK: 3253 xfer->flags.short_frames_ok = 1; 3254 break; 3255 case USB_MANUAL_STATUS: 3256 xfer->flags.manual_status = 1; 3257 break; 3258 } 3259} 3260 3261void 3262usbd_xfer_clr_flag(struct usb_xfer *xfer, int flag) 3263{ 3264 switch (flag) { 3265 case USB_FORCE_SHORT_XFER: 3266 xfer->flags.force_short_xfer = 0; 3267 break; 3268 case USB_SHORT_XFER_OK: 3269 xfer->flags.short_xfer_ok = 0; 3270 break; 3271 case USB_MULTI_SHORT_OK: 3272 xfer->flags.short_frames_ok = 0; 3273 break; 3274 case USB_MANUAL_STATUS: 3275 xfer->flags.manual_status = 0; 3276 break; 3277 } 3278} 3279 3280/* 3281 * The following function returns in milliseconds when the isochronous 3282 * transfer was completed by the hardware. The returned value wraps 3283 * around 65536 milliseconds. 3284 */ 3285uint16_t 3286usbd_xfer_get_timestamp(struct usb_xfer *xfer) 3287{ 3288 return (xfer->isoc_time_complete); 3289}
|