| NOTES (50120) | NOTES (50128) |
|---|---|
| 1# 2# LINT -- config file for checking all the sources, tries to pull in 3# as much of the source tree as it can. 4# | 1# 2# LINT -- config file for checking all the sources, tries to pull in 3# as much of the source tree as it can. 4# |
| 5# $Id: LINT,v 1.628 1999/08/20 03:48:02 ken Exp $ | 5# $Id: LINT,v 1.629 1999/08/21 17:40:37 wpaul Exp $ |
| 6# 7# NB: You probably don't want to try running a kernel built from this 8# file. Instead, you should start from GENERIC, and add options from 9# this file as required. 10# 11 12# 13# This directive is mandatory; it defines the architecture to be --- 1560 unchanged lines hidden (view full) --- 1574# workalike. 1575# 1576# The 'sf' device provides support for Adaptec Duralink PCI fast 1577# ethernet adapters based on the Adaptec AIC-6915 "starfire" controller. 1578# This includes dual and quad port cards, as well as one 100baseFX card. 1579# Most of these are 64-bit PCI devices, except for one single port 1580# card which is 32-bit. 1581# | 6# 7# NB: You probably don't want to try running a kernel built from this 8# file. Instead, you should start from GENERIC, and add options from 9# this file as required. 10# 11 12# 13# This directive is mandatory; it defines the architecture to be --- 1560 unchanged lines hidden (view full) --- 1574# workalike. 1575# 1576# The 'sf' device provides support for Adaptec Duralink PCI fast 1577# ethernet adapters based on the Adaptec AIC-6915 "starfire" controller. 1578# This includes dual and quad port cards, as well as one 100baseFX card. 1579# Most of these are 64-bit PCI devices, except for one single port 1580# card which is 32-bit. 1581# |
| 1582# The 'ste' device provides support for adapters based on the Sundance 1583# Technologies ST201 PCI fast ethernet controller. This includes the 1584# D-Link DFE-550TX. 1585# |
|
| 1582# The 'sk' device provides support for the SysKonnect SK-984x series 1583# PCI gigabit ethernet NICs. This includes the SK-9841 and SK-9842 1584# single port cards (single mode and multimode fiber) and the 1585# SK-9843 and SK-9844 dual port cards (also single mode and multimode). 1586# The driver will autodetect the number of ports on the card and 1587# attach each one as a separate network interface. 1588# 1589# The 'ti' device provides support for PCI gigabit ethernet NICs based --- 634 unchanged lines hidden --- | 1586# The 'sk' device provides support for the SysKonnect SK-984x series 1587# PCI gigabit ethernet NICs. This includes the SK-9841 and SK-9842 1588# single port cards (single mode and multimode fiber) and the 1589# SK-9843 and SK-9844 dual port cards (also single mode and multimode). 1590# The driver will autodetect the number of ports on the card and 1591# attach each one as a separate network interface. 1592# 1593# The 'ti' device provides support for PCI gigabit ethernet NICs based --- 634 unchanged lines hidden --- |