2#
3# NOTES -- Lines that can be cut/pasted into kernel and hints configs.
4#
5# Lines that begin with 'device', 'options', 'machine', 'ident', 'maxusers',
6# 'makeoptions', 'hints', etc. go into the kernel configuration that you
7# run config(8) with.
8#
9# Lines that begin with 'hint.' are NOT for config(8), they go into your
10# hints file. See /boot/device.hints and/or the 'hints' config(8) directive.
11#
12# Please use ``make LINT'' to create an old-style LINT file if you want to
13# do kernel test-builds.
14#
15# This file contains machine independent kernel configuration notes. For
16# machine dependent notes, look in /sys/<arch>/conf/NOTES.
17#
18
19#
20# NOTES conventions and style guide:
21#
22# Large block comments should begin and end with a line containing only a
23# comment character.
24#
25# To describe a particular object, a block comment (if it exists) should
26# come first. Next should come device, options, and hints lines in that
27# order. All device and option lines must be described by a comment that
28# doesn't just expand the device or option name. Use only a concise
29# comment on the same line if possible. Very detailed descriptions of
30# devices and subsystems belong in man pages.
31#
32# A space followed by a tab separates 'options' from an option name. Two
33# spaces followed by a tab separate 'device' from a device name. Comments
34# after an option or device should use one space after the comment character.
35# To comment out a negative option that disables code and thus should not be
36# enabled for LINT builds, precede 'options' with "#!".
37#
38
39#
40# This is the ``identification'' of the kernel. Usually this should
41# be the same as the name of your kernel.
42#
43ident LINT
44
45#
46# The `maxusers' parameter controls the static sizing of a number of
47# internal system tables by a formula defined in subr_param.c.
48# Omitting this parameter or setting it to 0 will cause the system to
49# auto-size based on physical memory.
50#
51maxusers 10
52
53#
54# The `makeoptions' parameter allows variables to be passed to the
55# generated Makefile in the build area.
56#
57# CONF_CFLAGS gives some extra compiler flags that are added to ${CFLAGS}
58# after most other flags. Here we use it to inhibit use of non-optimal
59# gcc builtin functions (e.g., memcmp).
60#
61# DEBUG happens to be magic.
62# The following is equivalent to 'config -g KERNELNAME' and creates
63# 'kernel.debug' compiled with -g debugging as well as a normal
64# 'kernel'. Use 'make install.debug' to install the debug kernel
65# but that isn't normally necessary as the debug symbols are not loaded
66# by the kernel and are not useful there anyway.
67#
68# KERNEL can be overridden so that you can change the default name of your
69# kernel.
70#
71# MODULES_OVERRIDE can be used to limit modules built to a specific list.
72#
73makeoptions CONF_CFLAGS=-fno-builtin #Don't allow use of memcmp, etc.
74#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
75#makeoptions KERNEL=foo #Build kernel "foo" and install "/foo"
76# Only build Linux API modules and plus those parts of the sound system I need.
77#makeoptions MODULES_OVERRIDE="linux sound/sound sound/driver/maestro3"
78makeoptions DESTDIR=/tmp
79
80#
81# FreeBSD processes are subject to certain limits to their consumption
82# of system resources. See getrlimit(2) for more details. Each
83# resource limit has two values, a "soft" limit and a "hard" limit.
84# The soft limits can be modified during normal system operation, but
85# the hard limits are set at boot time. Their default values are
86# in sys/<arch>/include/vmparam.h. There are two ways to change them:
87#
88# 1. Set the values at kernel build time. The options below are one
89# way to allow that limit to grow to 1GB. They can be increased
90# further by changing the parameters:
91#
92# 2. In /boot/loader.conf, set the tunables kern.maxswzone,
93# kern.maxbcache, kern.maxtsiz, kern.dfldsiz, kern.maxdsiz,
94# kern.dflssiz, kern.maxssiz and kern.sgrowsiz.
95#
96# The options in /boot/loader.conf override anything in the kernel
97# configuration file. See the function init_param1 in
98# sys/kern/subr_param.c for more details.
99#
100
101options MAXDSIZ=(1024UL*1024*1024)
102options MAXSSIZ=(128UL*1024*1024)
103options DFLDSIZ=(1024UL*1024*1024)
104
105#
106# BLKDEV_IOSIZE sets the default block size used in user block
107# device I/O. Note that this value will be overridden by the label
108# when specifying a block device from a label with a non-0
109# partition blocksize. The default is PAGE_SIZE.
110#
111options BLKDEV_IOSIZE=8192
112
113# Options for the VM subsystem
114# Deprecated options supported for backwards compatibility
115#options PQ_NOOPT # No coloring
116
117# This allows you to actually store this configuration file into
118# the kernel binary itself, where it may be later read by saying:
119# strings -n 3 /boot/kernel/kernel | sed -n 's/^___//p' > MYKERNEL
120#
121options INCLUDE_CONFIG_FILE # Include this file in kernel
122
123options GEOM_AES # Don't use, use GEOM_BDE
124options GEOM_APPLE # Apple partitioning
125options GEOM_BDE # Disk encryption.
126options GEOM_BSD # BSD disklabels
127options GEOM_CONCAT # Disk concatenation.
128options GEOM_ELI # Disk encryption.
129options GEOM_FOX # Redundant path mitigation
130options GEOM_GATE # Userland services.
131options GEOM_GPT # GPT partitioning
132options GEOM_LABEL # Providers labelization.
133options GEOM_MBR # DOS/MBR partitioning
134options GEOM_MIRROR # Disk mirroring.
135options GEOM_NOP # Test class.
136options GEOM_PC98 # NEC PC9800 partitioning
137options GEOM_RAID3 # RAID3 functionality.
138options GEOM_SHSEC # Shared secret.
139options GEOM_STRIPE # Disk striping.
140options GEOM_SUNLABEL # Sun/Solaris partitioning
141options GEOM_UZIP # Read-only compressed disks
142options GEOM_VOL # Volume names from UFS superblock
143options GEOM_ZERO # Peformance testing helper.
144
145#
146# The root device and filesystem type can be compiled in;
147# this provides a fallback option if the root device cannot
148# be correctly guessed by the bootstrap code, or an override if
149# the RB_DFLTROOT flag (-r) is specified when booting the kernel.
150#
151options ROOTDEVNAME=\"ufs:da0s2e\"
152
153
154#####################################################################
155# Scheduler options:
156#
157# Specifying one of SCHED_4BSD or SCHED_ULE is mandatory. These options
158# select which scheduler is compiled in.
159#
160# SCHED_4BSD is the historical, proven, BSD scheduler. It has a global run
161# queue and no cpu affinity which makes it suboptimal for SMP. It has very
162# good interactivity and priority selection.
163#
164# SCHED_ULE is a new scheduler that has been designed for SMP and has some
165# advantages for UP as well. It is intended to replace the 4BSD scheduler
166# over time.
167#
168options SCHED_4BSD
169#options SCHED_ULE
170
171#####################################################################
172# SMP OPTIONS:
173#
174# SMP enables building of a Symmetric MultiProcessor Kernel.
175
176# Mandatory:
177options SMP # Symmetric MultiProcessor Kernel
178
179# ADAPTIVE_MUTEXES changes the behavior of blocking mutexes to spin
180# if the thread that currently owns the mutex is executing on another
181# CPU. This behaviour is enabled by default, so this option can be used
182# to disable it.
183options NO_ADAPTIVE_MUTEXES
184
185# ADAPTIVE_GIANT causes the Giant lock to also be made adaptive when
186# running without NO_ADAPTIVE_MUTEXES. Normally, because Giant is assumed
187# to be held for extended periods, contention on Giant will cause a thread
188# to sleep rather than spinning.
189options ADAPTIVE_GIANT
190
191# MUTEX_NOINLINE forces mutex operations to call functions to perform each
192# operation rather than inlining the simple cases. This can be used to
193# shrink the size of the kernel text segment. Note that this behavior is
194# already implied by the INVARIANT_SUPPORT, INVARIANTS, KTR, MUTEX_PROFILING,
195# and WITNESS options.
196options MUTEX_NOINLINE
197
198# MUTEX_WAKE_ALL changes the mutex unlock algorithm to wake all waiters
199# when a contested mutex is released rather than just awaking the highest
200# priority waiter.
201options MUTEX_WAKE_ALL
202
203# RWLOCK_NOINLINE forces rwlock operations to call functions to perform each
204# operation rather than inlining the simple cases. This can be used to
205# shrink the size of the kernel text segment. Note that this behavior is
206# already implied by the INVARIANT_SUPPORT, INVARIANTS, KTR, MUTEX_PROFILING,
207# and WITNESS options.
208options RWLOCK_NOINLINE
209
210# SMP Debugging Options:
211#
212# PREEMPTION allows the threads that are in the kernel to be preempted
213# by higher priority threads. It helps with interactivity and
214# allows interrupt threads to run sooner rather than waiting.
215# WARNING! Only tested on alpha, amd64, and i386.
216# FULL_PREEMPTION instructs the kernel to preempt non-realtime kernel
217# threads. Its sole use is to expose race conditions and other
218# bugs during development. Enabling this option will reduce
219# performance and increase the frequency of kernel panics by
220# design. If you aren't sure that you need it then you don't.
221# Relies on the PREEMPTION option. DON'T TURN THIS ON.
222# MUTEX_DEBUG enables various extra assertions in the mutex code.
223# SLEEPQUEUE_PROFILING enables rudimentary profiling of the hash table
224# used to hold active sleep queues.
225# TURNSTILE_PROFILING enables rudimentary profiling of the hash table
226# used to hold active lock queues.
227# WITNESS enables the witness code which detects deadlocks and cycles
228# during locking operations.
229# WITNESS_KDB causes the witness code to drop into the kernel debugger if
230# a lock hierarchy violation occurs or if locks are held when going to
231# sleep.
232# WITNESS_SKIPSPIN disables the witness checks on spin mutexes.
233options PREEMPTION
234options FULL_PREEMPTION
235options MUTEX_DEBUG
236options WITNESS
237options WITNESS_KDB
238options WITNESS_SKIPSPIN
239
240# MUTEX_PROFILING - Profiling mutual exclusion locks (mutexes). See
241# MUTEX_PROFILING(9) for details.
242options MUTEX_PROFILING
243# Set the number of buffers and the hash size. The hash size MUST be larger
244# than the number of buffers. Hash size should be prime.
245options MPROF_BUFFERS="1536"
246options MPROF_HASH_SIZE="1543"
247
248# Profiling for internal hash tables.
249options SLEEPQUEUE_PROFILING
250options TURNSTILE_PROFILING
251
252
253#####################################################################
254# COMPATIBILITY OPTIONS
255
256#
257# Implement system calls compatible with 4.3BSD and older versions of
258# FreeBSD. You probably do NOT want to remove this as much current code
259# still relies on the 4.3 emulation. Note that some architectures that
260# are supported by FreeBSD do not include support for certain important
261# aspects of this compatibility option, namely those related to the
262# signal delivery mechanism.
263#
264options COMPAT_43
265
266# Old tty interface.
267options COMPAT_43TTY
268
269# Enable FreeBSD4 compatibility syscalls
270options COMPAT_FREEBSD4
271
272# Enable FreeBSD5 compatibility syscalls
273options COMPAT_FREEBSD5
274
275#
276# These three options provide support for System V Interface
277# Definition-style interprocess communication, in the form of shared
278# memory, semaphores, and message queues, respectively.
279#
280options SYSVSHM
281options SYSVSEM
282options SYSVMSG
283
284
285#####################################################################
286# DEBUGGING OPTIONS
287
288#
289# Compile with kernel debugger related code.
290#
291options KDB
292
293#
294# Print a stack trace of the current thread on the console for a panic.
295#
296options KDB_TRACE
297
298#
299# Don't enter the debugger for a panic. Intended for unattended operation
300# where you may want to enter the debugger from the console, but still want
301# the machine to recover from a panic.
302#
303options KDB_UNATTENDED
304
305#
306# Enable the ddb debugger backend.
307#
308options DDB
309
310#
311# Print the numerical value of symbols in addition to the symbolic
312# representation.
313#
314options DDB_NUMSYM
315
316#
317# Enable the remote gdb debugger backend.
318#
319options GDB
320
321#
322# SYSCTL_DEBUG enables a 'sysctl' debug tree that can be used to dump the
323# contents of the registered sysctl nodes on the console. It is disabled by
324# default because it generates excessively verbose consol output that can
325# interfere with serial console operation.
326#
327options SYSCTL_DEBUG
328
329#
330# DEBUG_MEMGUARD builds and enables memguard(9), a replacement allocator
331# for the kernel used to detect modify-after-free scenarios. See the
332# memguard(9) man page for more information on usage.
333#
334options DEBUG_MEMGUARD
335
336#
337# DEBUG_REDZONE enables buffer underflows and buffer overflows detection for
338# malloc(9).
339#
340options DEBUG_REDZONE
341
342#
343# KTRACE enables the system-call tracing facility ktrace(2). To be more
344# SMP-friendly, KTRACE uses a worker thread to process most trace events
345# asynchronously to the thread generating the event. This requires a
346# pre-allocated store of objects representing trace events. The
347# KTRACE_REQUEST_POOL option specifies the initial size of this store.
348# The size of the pool can be adjusted both at boottime and runtime via
349# the kern.ktrace_request_pool tunable and sysctl.
350#
351options KTRACE #kernel tracing
352options KTRACE_REQUEST_POOL=101
353
354#
355# KTR is a kernel tracing mechanism imported from BSD/OS. Currently it
356# has no userland interface aside from a few sysctl's. It is enabled with
357# the KTR option. KTR_ENTRIES defines the number of entries in the circular
358# trace buffer. KTR_COMPILE defines the mask of events to compile into the
359# kernel as defined by the KTR_* constants in <sys/ktr.h>. KTR_MASK defines the
360# initial value of the ktr_mask variable which determines at runtime what
361# events to trace. KTR_CPUMASK determines which CPU's log events, with
362# bit X corresponding to cpu X. KTR_VERBOSE enables dumping of KTR events
363# to the console by default. This functionality can be toggled via the
364# debug.ktr_verbose sysctl and defaults to off if KTR_VERBOSE is not defined.
365#
366options KTR
367options KTR_ENTRIES=1024
368options KTR_COMPILE=(KTR_INTR|KTR_PROC)
369options KTR_MASK=KTR_INTR
370options KTR_CPUMASK=0x3
371options KTR_VERBOSE
372
373#
374# ALQ(9) is a facilty for the asynchronous queuing of records from the kernel
375# to a vnode, and is employed by services such as KTR(4) to produce trace
376# files based on a kernel event stream. Records are written asynchronously
377# in a worker thread.
378#
379options ALQ
380options KTR_ALQ
381
382#
383# The INVARIANTS option is used in a number of source files to enable
384# extra sanity checking of internal structures. This support is not
385# enabled by default because of the extra time it would take to check
386# for these conditions, which can only occur as a result of
387# programming errors.
388#
389options INVARIANTS
390
391#
392# The INVARIANT_SUPPORT option makes us compile in support for
393# verifying some of the internal structures. It is a prerequisite for
394# 'INVARIANTS', as enabling 'INVARIANTS' will make these functions be
395# called. The intent is that you can set 'INVARIANTS' for single
396# source files (by changing the source file or specifying it on the
397# command line) if you have 'INVARIANT_SUPPORT' enabled. Also, if you
398# wish to build a kernel module with 'INVARIANTS', then adding
399# 'INVARIANT_SUPPORT' to your kernel will provide all the necessary
400# infrastructure without the added overhead.
401#
402options INVARIANT_SUPPORT
403
404#
405# The DIAGNOSTIC option is used to enable extra debugging information
406# from some parts of the kernel. As this makes everything more noisy,
407# it is disabled by default.
408#
409options DIAGNOSTIC
410
411#
412# REGRESSION causes optional kernel interfaces necessary only for regression
413# testing to be enabled. These interfaces may constitute security risks
414# when enabled, as they permit processes to easily modify aspects of the
415# run-time environment to reproduce unlikely or unusual (possibly normally
416# impossible) scenarios.
417#
418options REGRESSION
419
420#
421# RESTARTABLE_PANICS allows one to continue from a panic as if it were
422# a call to the debugger to continue from a panic as instead. It is only
423# useful if a kernel debugger is present. To restart from a panic, reset
424# the panicstr variable to NULL and continue execution. This option is
425# for development use only and should NOT be used in production systems
426# to "workaround" a panic.
427#
428#options RESTARTABLE_PANICS
429
430#
431# This option let some drivers co-exist that can't co-exist in a running
432# system. This is used to be able to compile all kernel code in one go for
433# quality assurance purposes (like this file, which the option takes it name
434# from.)
435#
436options COMPILING_LINT
437
438
439#####################################################################
440# PERFORMANCE MONITORING OPTIONS
441
442#
443# The hwpmc driver that allows the use of in-CPU performance monitoring
444# counters for performance monitoring. The base kernel needs to configured
445# with the 'options' line, while the hwpmc device can be either compiled
446# in or loaded as a loadable kernel module.
447#
448# Additional configuration options may be required on specific architectures,
449# please see hwpmc(4).
450
451device hwpmc # Driver (also a loadable module)
452options HWPMC_HOOKS # Other necessary kernel hooks
453
454
455#####################################################################
456# NETWORKING OPTIONS
457
458#
459# Protocol families:
460# Only the INET (Internet) family is officially supported in FreeBSD.
461#
462options INET #Internet communications protocols
463options INET6 #IPv6 communications protocols
464options IPSEC #IP security
465options IPSEC_ESP #IP security (crypto; define w/ IPSEC)
466options IPSEC_DEBUG #debug for IP security
467#
468# Set IPSEC_FILTERGIF to force packets coming through a gif tunnel
469# to be processed by any configured packet filtering (ipfw, ipf).
470# The default is that packets coming from a tunnel are _not_ processed;
471# they are assumed trusted.
472#
473# IPSEC history is preserved for such packets, and can be filtered
474# using ipfw(8)'s 'ipsec' keyword, when this option is enabled.
475#
476#options IPSEC_FILTERGIF #filter ipsec packets from a tunnel
477
478#options FAST_IPSEC #new IPsec (cannot define w/ IPSEC)
479
480options IPX #IPX/SPX communications protocols
481options IPXIP #IPX in IP encapsulation (not available)
482
483options NCP #NetWare Core protocol
484
485options NETATALK #Appletalk communications protocols
486options NETATALKDEBUG #Appletalk debugging
487
488#
489# SMB/CIFS requester
490# NETSMB enables support for SMB protocol, it requires LIBMCHAIN and LIBICONV
491# options.
|
493
494# mchain library. It can be either loaded as KLD or compiled into kernel
495options LIBMCHAIN
496
497# libalias library, performing NAT
498options LIBALIAS
499
500# altq(9). Enable the base part of the hooks with the ALTQ option.
501# Individual disciplines must be built into the base system and can not be
502# loaded as modules at this point. ALTQ requires a stable TSC so if yours is
503# broken or changes with CPU throttling then you must also have the ALTQ_NOPCC
504# option.
505options ALTQ
506options ALTQ_CBQ # Class Bases Queueing
507options ALTQ_RED # Random Early Detection
508options ALTQ_RIO # RED In/Out
509options ALTQ_HFSC # Hierarchical Packet Scheduler
510options ALTQ_CDNR # Traffic conditioner
511options ALTQ_PRIQ # Priority Queueing
512options ALTQ_NOPCC # Required if the TSC is unusable
513options ALTQ_DEBUG
514
515# netgraph(4). Enable the base netgraph code with the NETGRAPH option.
516# Individual node types can be enabled with the corresponding option
517# listed below; however, this is not strictly necessary as netgraph
518# will automatically load the corresponding KLD module if the node type
519# is not already compiled into the kernel. Each type below has a
520# corresponding man page, e.g., ng_async(8).
521options NETGRAPH # netgraph(4) system
522options NETGRAPH_DEBUG # enable extra debugging, this
523 # affects netgraph(4) and nodes
524# Node types
525options NETGRAPH_ASYNC
526options NETGRAPH_ATMLLC
527options NETGRAPH_ATM_ATMPIF
528options NETGRAPH_BLUETOOTH # ng_bluetooth(4)
529options NETGRAPH_BLUETOOTH_BT3C # ng_bt3c(4)
530options NETGRAPH_BLUETOOTH_H4 # ng_h4(4)
531options NETGRAPH_BLUETOOTH_HCI # ng_hci(4)
532options NETGRAPH_BLUETOOTH_L2CAP # ng_l2cap(4)
533options NETGRAPH_BLUETOOTH_SOCKET # ng_btsocket(4)
534options NETGRAPH_BLUETOOTH_UBT # ng_ubt(4)
535options NETGRAPH_BLUETOOTH_UBTBCMFW # ubtbcmfw(4)
536options NETGRAPH_BPF
537options NETGRAPH_BRIDGE
538options NETGRAPH_CISCO
539options NETGRAPH_DEVICE
540options NETGRAPH_ECHO
541options NETGRAPH_EIFACE
542options NETGRAPH_ETHER
543options NETGRAPH_FEC
544options NETGRAPH_FRAME_RELAY
545options NETGRAPH_GIF
546options NETGRAPH_GIF_DEMUX
547options NETGRAPH_HOLE
548options NETGRAPH_IFACE
549options NETGRAPH_IP_INPUT
550options NETGRAPH_IPFW
551options NETGRAPH_KSOCKET
552options NETGRAPH_L2TP
553options NETGRAPH_LMI
554# MPPC compression requires proprietary files (not included)
555#options NETGRAPH_MPPC_COMPRESSION
556options NETGRAPH_MPPC_ENCRYPTION
557options NETGRAPH_NETFLOW
558options NETGRAPH_NAT
559options NETGRAPH_ONE2MANY
560options NETGRAPH_PPP
561options NETGRAPH_PPPOE
562options NETGRAPH_PPTPGRE
563options NETGRAPH_RFC1490
564options NETGRAPH_SOCKET
565options NETGRAPH_SPLIT
566options NETGRAPH_SPPP
567options NETGRAPH_TCPMSS
568options NETGRAPH_TEE
569options NETGRAPH_TTY
570options NETGRAPH_UI
571options NETGRAPH_VJC
572
573# NgATM - Netgraph ATM
574options NGATM_ATM
575options NGATM_ATMBASE
576options NGATM_SSCOP
577options NGATM_SSCFU
578options NGATM_UNI
579options NGATM_CCATM
580
581device mn # Munich32x/Falc54 Nx64kbit/sec cards.
582
583#
584# Network interfaces:
585# The `loop' device is MANDATORY when networking is enabled.
586# The `ether' device provides generic code to handle
587# Ethernets; it is MANDATORY when an Ethernet device driver is
588# configured or token-ring is enabled.
589# The `vlan' device implements the VLAN tagging of Ethernet frames
590# according to IEEE 802.1Q. It requires `device miibus'.
591# The `wlan' device provides generic code to support 802.11
592# drivers, including host AP mode; it is MANDATORY for the wi,
593# ath, and awi drivers and will eventually be required by all 802.11 drivers.
594# The `wlan_wep', `wlan_tkip', and `wlan_ccmp' devices provide
595# support for WEP, TKIP, and AES-CCMP crypto protocols optionally
596# used with 802.11 devices that depend on the `wlan' module.
597# The `wlan_xauth' device provides support for external (i.e. user-mode)
598# authenticators for use with 802.11 drivers that use the `wlan'
599# module and support 802.1x and/or WPA security protocols.
600# The `wlan_acl' device provides a MAC-based access control mechanism
601# for use with 802.11 drivers operating in ap mode and using the
602# `wlan' module.
603# The `fddi' device provides generic code to support FDDI.
604# The `arcnet' device provides generic code to support Arcnet.
605# The `sppp' device serves a similar role for certain types
606# of synchronous PPP links (like `cx', `ar').
607# The `sl' device implements the Serial Line IP (SLIP) service.
608# The `ppp' device implements the Point-to-Point Protocol.
609# The `bpf' device enables the Berkeley Packet Filter. Be
610# aware of the legal and administrative consequences of enabling this
611# option. The number of devices determines the maximum number of
612# simultaneous BPF clients programs runnable. DHCP requires bpf.
613# The `disc' device implements a minimal network interface,
614# which throws away all packets sent and never receives any. It is
615# included for testing purposes. This shows up as the `ds' interface.
616# The `tap' device is a pty-like virtual Ethernet interface
617# The `tun' device implements (user-)ppp and nos-tun
618# The `gif' device implements IPv6 over IP4 tunneling,
619# IPv4 over IPv6 tunneling, IPv4 over IPv4 tunneling and
620# IPv6 over IPv6 tunneling.
621# The `gre' device implements two types of IP4 over IP4 tunneling:
622# GRE and MOBILE, as specified in the RFC1701 and RFC2004.
623# The XBONEHACK option allows the same pair of addresses to be configured on
624# multiple gif interfaces.
625# The `faith' device captures packets sent to it and diverts them
626# to the IPv4/IPv6 translation daemon.
627# The `stf' device implements 6to4 encapsulation.
628# The `ef' device provides support for multiple ethernet frame types
629# specified via ETHER_* options. See ef(4) for details.
630#
631# The pf packet filter consists of three devices:
632# The `pf' device provides /dev/pf and the firewall code itself.
633# The `pflog' device provides the pflog0 interface which logs packets.
634# The `pfsync' device provides the pfsync0 interface used for
635# synchronization of firewall state tables (over the net).
636#
637# The PPP_BSDCOMP option enables support for compress(1) style entire
638# packet compression, the PPP_DEFLATE is for zlib/gzip style compression.
639# PPP_FILTER enables code for filtering the ppp data stream and selecting
640# events for resetting the demand dial activity timer - requires bpf.
641# See pppd(8) for more details.
642#
643device ether #Generic Ethernet
644device vlan #VLAN support (needs miibus)
645device wlan #802.11 support
646device wlan_wep #802.11 WEP support
647device wlan_ccmp #802.11 CCMP support
648device wlan_tkip #802.11 TKIP support
649device wlan_xauth #802.11 external authenticator support
650device wlan_acl #802.11 MAC ACL support
651device token #Generic TokenRing
652device fddi #Generic FDDI
653device arcnet #Generic Arcnet
654device sppp #Generic Synchronous PPP
655device loop #Network loopback device
656device bpf #Berkeley packet filter
657device disc #Discard device (ds0, ds1, etc)
658device tap #Virtual Ethernet driver
659device tun #Tunnel driver (ppp(8), nos-tun(8))
660device sl #Serial Line IP
661device gre #IP over IP tunneling
662device if_bridge #Bridge interface
663device pf #PF OpenBSD packet-filter firewall
664device pflog #logging support interface for PF
665device pfsync #synchronization interface for PF
666device carp #Common Address Redundancy Protocol
667device ppp #Point-to-point protocol
668options PPP_BSDCOMP #PPP BSD-compress support
669options PPP_DEFLATE #PPP zlib/deflate/gzip support
670options PPP_FILTER #enable bpf filtering (needs bpf)
671
672device ef # Multiple ethernet frames support
673options ETHER_II # enable Ethernet_II frame
674options ETHER_8023 # enable Ethernet_802.3 (Novell) frame
675options ETHER_8022 # enable Ethernet_802.2 frame
676options ETHER_SNAP # enable Ethernet_802.2/SNAP frame
677
678# for IPv6
679device gif #IPv6 and IPv4 tunneling
680options XBONEHACK
681device faith #for IPv6 and IPv4 translation
682device stf #6to4 IPv6 over IPv4 encapsulation
683
684#
685# Internet family options:
686#
687# MROUTING enables the kernel multicast packet forwarder, which works
688# with mrouted(8).
689#
690# PIM enables Protocol Independent Multicast in the kernel.
691# Requires MROUTING enabled.
692#
693# IPFIREWALL enables support for IP firewall construction, in
694# conjunction with the `ipfw' program. IPFIREWALL_VERBOSE sends
695# logged packets to the system logger. IPFIREWALL_VERBOSE_LIMIT
696# limits the number of times a matching entry can be logged.
697#
698# WARNING: IPFIREWALL defaults to a policy of "deny ip from any to any"
699# and if you do not add other rules during startup to allow access,
700# YOU WILL LOCK YOURSELF OUT. It is suggested that you set firewall_type=open
701# in /etc/rc.conf when first enabling this feature, then refining the
702# firewall rules in /etc/rc.firewall after you've tested that the new kernel
703# feature works properly.
704#
705# IPFIREWALL_DEFAULT_TO_ACCEPT causes the default rule (at boot) to
706# allow everything. Use with care, if a cracker can crash your
707# firewall machine, they can get to your protected machines. However,
708# if you are using it as an as-needed filter for specific problems as
709# they arise, then this may be for you. Changing the default to 'allow'
710# means that you won't get stuck if the kernel and /sbin/ipfw binary get
711# out of sync.
712#
713# IPDIVERT enables the divert IP sockets, used by ``ipfw divert''. It
714# depends on IPFIREWALL if compiled into the kernel.
715#
716# IPFIREWALL_FORWARD enables changing of the packet destination either
717# to do some sort of policy routing or transparent proxying. Used by
718# ``ipfw forward''.
719#
720# IPFIREWALL_FORWARD_EXTENDED enables full packet destination changing
721# including redirecting packets to local IP addresses and ports. All
722# redirections apply to locally generated packets too. Because of this
723# great care is required when crafting the ruleset.
724#
725# IPSTEALTH enables code to support stealth forwarding (i.e., forwarding
726# packets without touching the ttl). This can be useful to hide firewalls
727# from traceroute and similar tools.
728#
729# TCPDEBUG enables code which keeps traces of the TCP state machine
730# for sockets with the SO_DEBUG option set, which can then be examined
731# using the trpt(8) utility.
732#
733options MROUTING # Multicast routing
734options PIM # Protocol Independent Multicast
735options IPFIREWALL #firewall
736options IPFIREWALL_VERBOSE #enable logging to syslogd(8)
737options IPFIREWALL_VERBOSE_LIMIT=100 #limit verbosity
738options IPFIREWALL_DEFAULT_TO_ACCEPT #allow everything by default
739options IPFIREWALL_FORWARD #packet destination changes
740options IPFIREWALL_FORWARD_EXTENDED #all packet dest changes
741options IPV6FIREWALL #firewall for IPv6
742options IPV6FIREWALL_VERBOSE
743options IPV6FIREWALL_VERBOSE_LIMIT=100
744options IPV6FIREWALL_DEFAULT_TO_ACCEPT
745options IPDIVERT #divert sockets
746options IPFILTER #ipfilter support
747options IPFILTER_LOG #ipfilter logging
748options IPFILTER_LOOKUP #ipfilter pools
749options IPFILTER_DEFAULT_BLOCK #block all packets by default
750options IPSTEALTH #support for stealth forwarding
751options TCPDEBUG
752
753# The MBUF_STRESS_TEST option enables options which create
754# various random failures / extreme cases related to mbuf
755# functions. See mbuf(9) for a list of available test cases.
756options MBUF_STRESS_TEST
757
758# Statically Link in accept filters
759options ACCEPT_FILTER_DATA
760options ACCEPT_FILTER_HTTP
761
762# TCP_DROP_SYNFIN adds support for ignoring TCP packets with SYN+FIN. This
763# prevents nmap et al. from identifying the TCP/IP stack, but breaks support
764# for RFC1644 extensions and is not recommended for web servers.
765#
766options TCP_DROP_SYNFIN #drop TCP packets with SYN+FIN
767
768# TCP_SIGNATURE adds support for RFC 2385 (TCP-MD5) digests. These are
769# carried in TCP option 19. This option is commonly used to protect
770# TCP sessions (e.g. BGP) where IPSEC is not available nor desirable.
771# This is enabled on a per-socket basis using the TCP_MD5SIG socket option.
772# This requires the use of 'device crypto', 'options FAST_IPSEC' or 'options
773# IPSEC', and 'device cryptodev'.
774#options TCP_SIGNATURE #include support for RFC 2385
775
776# DUMMYNET enables the "dummynet" bandwidth limiter. You need IPFIREWALL
777# as well. See dummynet(4) and ipfw(8) for more info. When you run
778# DUMMYNET it is advisable to also have "options HZ=1000" to achieve a
779# smoother scheduling of the traffic.
780options DUMMYNET
781
782# Zero copy sockets support. This enables "zero copy" for sending and
783# receiving data via a socket. The send side works for any type of NIC,
784# the receive side only works for NICs that support MTUs greater than the
785# page size of your architecture and that support header splitting. See
786# zero_copy(9) for more details.
787options ZERO_COPY_SOCKETS
788
789#
790# ATM (HARP version) options
791#
792# ATM_CORE includes the base ATM functionality code. This must be included
793# for ATM support.
794#
795# ATM_IP includes support for running IP over ATM.
796#
797# At least one (and usually only one) of the following signalling managers
798# must be included (note that all signalling managers include PVC support):
799# ATM_SIGPVC includes support for the PVC-only signalling manager `sigpvc'.
800# ATM_SPANS includes support for the `spans' signalling manager, which runs
801# the FORE Systems's proprietary SPANS signalling protocol.
802# ATM_UNI includes support for the `uni30' and `uni31' signalling managers,
803# which run the ATM Forum UNI 3.x signalling protocols.
804#
805# The `hfa' driver provides support for the FORE Systems, Inc.
806# PCA-200E ATM PCI Adapter.
807#
808# The `harp' pseudo-driver makes all NATM interface drivers available to HARP.
809#
810options ATM_CORE #core ATM protocol family
811options ATM_IP #IP over ATM support
812options ATM_SIGPVC #SIGPVC signalling manager
813options ATM_SPANS #SPANS signalling manager
814options ATM_UNI #UNI signalling manager
815
816device hfa #FORE PCA-200E ATM PCI
817device harp #Pseudo-interface for NATM
818
819
820#####################################################################
821# FILESYSTEM OPTIONS
822
823#
824# Only the root, /usr, and /tmp filesystems need be statically
825# compiled; everything else will be automatically loaded at mount
826# time. (Exception: the UFS family--- FFS --- cannot
827# currently be demand-loaded.) Some people still prefer to statically
828# compile other filesystems as well.
829#
830# NB: The NULL, PORTAL, UMAP and UNION filesystems are known to be
831# buggy, and WILL panic your system if you attempt to do anything with
832# them. They are included here as an incentive for some enterprising
833# soul to sit down and fix them.
834#
835
836# One of these is mandatory:
837options FFS #Fast filesystem
838options NFSCLIENT #Network File System client
839
840# The rest are optional:
841options CD9660 #ISO 9660 filesystem
842options FDESCFS #File descriptor filesystem
843options HPFS #OS/2 File system
844options MSDOSFS #MS DOS File System (FAT, FAT32)
845options NFSSERVER #Network File System server
846options NTFS #NT File System
847options NULLFS #NULL filesystem
848# Broken (depends on NCP):
849#options NWFS #NetWare filesystem
850options PORTALFS #Portal filesystem
851options PROCFS #Process filesystem (requires PSEUDOFS)
852options PSEUDOFS #Pseudo-filesystem framework
853options PSEUDOFS_TRACE #Debugging support for PSEUDOFS
854options SMBFS #SMB/CIFS filesystem
855options UDF #Universal Disk Format
856# Broken (seriously (functionally) broken):
857#options UMAPFS #UID map filesystem
858options UNIONFS #Union filesystem
859# The xFS_ROOT options REQUIRE the associated ``options xFS''
860options NFS_ROOT #NFS usable as root device
861
862# Soft updates is a technique for improving filesystem speed and
863# making abrupt shutdown less risky.
864#
865options SOFTUPDATES
866
867# Extended attributes allow additional data to be associated with files,
868# and is used for ACLs, Capabilities, and MAC labels.
869# See src/sys/ufs/ufs/README.extattr for more information.
870options UFS_EXTATTR
871options UFS_EXTATTR_AUTOSTART
872
873# Access Control List support for UFS filesystems. The current ACL
874# implementation requires extended attribute support, UFS_EXTATTR,
875# for the underlying filesystem.
876# See src/sys/ufs/ufs/README.acls for more information.
877options UFS_ACL
878
879# Directory hashing improves the speed of operations on very large
880# directories at the expense of some memory.
881options UFS_DIRHASH
882
883# Make space in the kernel for a root filesystem on a md device.
884# Define to the number of kilobytes to reserve for the filesystem.
885options MD_ROOT_SIZE=10
886
887# Make the md device a potential root device, either with preloaded
888# images of type mfs_root or md_root.
889options MD_ROOT
890
891# Disk quotas are supported when this option is enabled.
892options QUOTA #enable disk quotas
893
894# If you are running a machine just as a fileserver for PC and MAC
895# users, using SAMBA or Netatalk, you may consider setting this option
896# and keeping all those users' directories on a filesystem that is
897# mounted with the suiddir option. This gives new files the same
898# ownership as the directory (similar to group). It's a security hole
899# if you let these users run programs, so confine it to file-servers
900# (but it'll save you lots of headaches in those cases). Root owned
901# directories are exempt and X bits are cleared. The suid bit must be
902# set on the directory as well; see chmod(1) PC owners can't see/set
903# ownerships so they keep getting their toes trodden on. This saves
904# you all the support calls as the filesystem it's used on will act as
905# they expect: "It's my dir so it must be my file".
906#
907options SUIDDIR
908
909# NFS options:
910options NFS_MINATTRTIMO=3 # VREG attrib cache timeout in sec
911options NFS_MAXATTRTIMO=60
912options NFS_MINDIRATTRTIMO=30 # VDIR attrib cache timeout in sec
913options NFS_MAXDIRATTRTIMO=60
914options NFS_GATHERDELAY=10 # Default write gather delay (msec)
915options NFS_WDELAYHASHSIZ=16 # and with this
916options NFS_DEBUG # Enable NFS Debugging
917
918# Coda stuff:
919options CODA #CODA filesystem.
920device vcoda #coda minicache <-> venus comm.
921# Use the old Coda 5.x venus<->kernel interface instead of the new
922# realms-aware 6.x protocol.
923#options CODA_COMPAT_5
924
925#
926# Add support for the EXT2FS filesystem of Linux fame. Be a bit
927# careful with this - the ext2fs code has a tendency to lag behind
928# changes and not be exercised very much, so mounting read/write could
929# be dangerous (and even mounting read only could result in panics.)
930#
931options EXT2FS
932
933#
934# Add support for the ReiserFS filesystem (used in Linux). Currently,
935# this is limited to read-only access.
936#
937options REISERFS
938
939#
940# Add support for the SGI XFS filesystem. Currently,
941# this is limited to read-only access.
942#
943options XFS
944
945# Use real implementations of the aio_* system calls. There are numerous
946# stability and security issues in the current aio code that make it
947# unsuitable for inclusion on machines with untrusted local users.
948options VFS_AIO
949
950# Cryptographically secure random number generator; /dev/random
951device random
952
953# The system memory devices; /dev/mem, /dev/kmem
954device mem
955
956# Optional character code conversion support with LIBICONV.
957# Each option requires their base file system and LIBICONV.
958options CD9660_ICONV
959options MSDOSFS_ICONV
960options NTFS_ICONV
961options UDF_ICONV
962
963# Experimental support for large MS-DOS filesystems.
964#
965# WARNING: This uses at least 32 bytes of kernel memory (which is not
966# reclaimed until the FS is unmounted) for each file on disk to map
967# between the 32-bit inode numbers used by VFS and the 64-bit pseudo-inode
968# numbers used internally by msdosfs. This is only safe to use in certain
969# controlled situations (e.g. read-only FS with less than 1 million files).
970# Since the mappings do not persist across unmounts (or reboots), these
971# filesystems are not suitable for exporting through NFS, or any other
972# application that requires fixed inode numbers.
973options MSDOSFS_LARGE
974
975
976#####################################################################
977# POSIX P1003.1B
978
979# Real time extensions added in the 1993 Posix
980# _KPOSIX_PRIORITY_SCHEDULING: Build in _POSIX_PRIORITY_SCHEDULING
981
982options _KPOSIX_PRIORITY_SCHEDULING
983# p1003_1b_semaphores are very experimental,
984# user should be ready to assist in debugging if problems arise.
985options P1003_1B_SEMAPHORES
986
987# POSIX message queue
988options P1003_1B_MQUEUE
989
990#####################################################################
991# SECURITY POLICY PARAMETERS
992
993# Support for BSM audit
994options AUDIT
995
996# Support for Mandatory Access Control (MAC):
997options MAC
998options MAC_BIBA
999options MAC_BSDEXTENDED
1000options MAC_DEBUG
1001options MAC_IFOFF
1002options MAC_LOMAC
1003options MAC_MLS
1004options MAC_NONE
1005options MAC_PARTITION
1006options MAC_PORTACL
1007options MAC_SEEOTHERUIDS
1008options MAC_STUB
1009options MAC_TEST
1010
1011
1012#####################################################################
1013# CLOCK OPTIONS
1014
1015# The granularity of operation is controlled by the kernel option HZ whose
1016# default value (100) means a granularity of 10ms (1s/HZ).
1017# Some subsystems, such as DUMMYNET, might benefit from a smaller
1018# granularity such as 1ms or less, for a smoother scheduling of packets.
1019# Consider, however, that reducing the granularity too much might
1020# cause excessive overhead in clock interrupt processing,
1021# potentially causing ticks to be missed and thus actually reducing
1022# the accuracy of operation.
1023
1024options HZ=100
1025
1026# Enable support for the kernel PLL to use an external PPS signal,
1027# under supervision of [x]ntpd(8)
1028# More info in ntpd documentation: http://www.eecis.udel.edu/~ntp
1029
1030options PPS_SYNC
1031
1032
1033#####################################################################
1034# SCSI DEVICES
1035
1036# SCSI DEVICE CONFIGURATION
1037
1038# The SCSI subsystem consists of the `base' SCSI code, a number of
1039# high-level SCSI device `type' drivers, and the low-level host-adapter
1040# device drivers. The host adapters are listed in the ISA and PCI
1041# device configuration sections below.
1042#
1043# It is possible to wire down your SCSI devices so that a given bus,
1044# target, and LUN always come on line as the same device unit. In
1045# earlier versions the unit numbers were assigned in the order that
1046# the devices were probed on the SCSI bus. This means that if you
1047# removed a disk drive, you may have had to rewrite your /etc/fstab
1048# file, and also that you had to be careful when adding a new disk
1049# as it may have been probed earlier and moved your device configuration
1050# around. (See also option GEOM_VOL for a different solution to this
1051# problem.)
1052
1053# This old behavior is maintained as the default behavior. The unit
1054# assignment begins with the first non-wired down unit for a device
1055# type. For example, if you wire a disk as "da3" then the first
1056# non-wired disk will be assigned da4.
1057
1058# The syntax for wiring down devices is:
1059
1060hint.scbus.0.at="ahc0"
1061hint.scbus.1.at="ahc1"
1062hint.scbus.1.bus="0"
1063hint.scbus.3.at="ahc2"
1064hint.scbus.3.bus="0"
1065hint.scbus.2.at="ahc2"
1066hint.scbus.2.bus="1"
1067hint.da.0.at="scbus0"
1068hint.da.0.target="0"
1069hint.da.0.unit="0"
1070hint.da.1.at="scbus3"
1071hint.da.1.target="1"
1072hint.da.2.at="scbus2"
1073hint.da.2.target="3"
1074hint.sa.1.at="scbus1"
1075hint.sa.1.target="6"
1076
1077# "units" (SCSI logical unit number) that are not specified are
1078# treated as if specified as LUN 0.
1079
1080# All SCSI devices allocate as many units as are required.
1081
1082# The ch driver drives SCSI Media Changer ("jukebox") devices.
1083#
1084# The da driver drives SCSI Direct Access ("disk") and Optical Media
1085# ("WORM") devices.
1086#
1087# The sa driver drives SCSI Sequential Access ("tape") devices.
1088#
1089# The cd driver drives SCSI Read Only Direct Access ("cd") devices.
1090#
1091# The ses driver drives SCSI Environment Services ("ses") and
1092# SAF-TE ("SCSI Accessible Fault-Tolerant Enclosure") devices.
1093#
1094# The pt driver drives SCSI Processor devices.
1095#
1096#
1097# Target Mode support is provided here but also requires that a SIM
1098# (SCSI Host Adapter Driver) provide support as well.
1099#
1100# The targ driver provides target mode support as a Processor type device.
1101# It exists to give the minimal context necessary to respond to Inquiry
1102# commands. There is a sample user application that shows how the rest
1103# of the command support might be done in /usr/share/examples/scsi_target.
1104#
1105# The targbh driver provides target mode support and exists to respond
1106# to incoming commands that do not otherwise have a logical unit assigned
1107# to them.
1108#
1109# The "unknown" device (uk? in pre-2.0.5) is now part of the base SCSI
1110# configuration as the "pass" driver.
1111
1112device scbus #base SCSI code
1113device ch #SCSI media changers
1114device da #SCSI direct access devices (aka disks)
1115device sa #SCSI tapes
1116device cd #SCSI CD-ROMs
1117device ses #SCSI Environmental Services (and SAF-TE)
1118device pt #SCSI processor
1119device targ #SCSI Target Mode Code
1120device targbh #SCSI Target Mode Blackhole Device
1121device pass #CAM passthrough driver
1122
1123# CAM OPTIONS:
1124# debugging options:
1125# -- NOTE -- If you specify one of the bus/target/lun options, you must
1126# specify them all!
1127# CAMDEBUG: When defined enables debugging macros
1128# CAM_DEBUG_BUS: Debug the given bus. Use -1 to debug all busses.
1129# CAM_DEBUG_TARGET: Debug the given target. Use -1 to debug all targets.
1130# CAM_DEBUG_LUN: Debug the given lun. Use -1 to debug all luns.
1131# CAM_DEBUG_FLAGS: OR together CAM_DEBUG_INFO, CAM_DEBUG_TRACE,
1132# CAM_DEBUG_SUBTRACE, and CAM_DEBUG_CDB
1133#
1134# CAM_MAX_HIGHPOWER: Maximum number of concurrent high power (start unit) cmds
1135# CAM_NEW_TRAN_CODE: this is the new transport layer code that will be switched
1136# to soon
1137# SCSI_NO_SENSE_STRINGS: When defined disables sense descriptions
1138# SCSI_NO_OP_STRINGS: When defined disables opcode descriptions
1139# SCSI_DELAY: The number of MILLISECONDS to freeze the SIM (scsi adapter)
1140# queue after a bus reset, and the number of milliseconds to
1141# freeze the device queue after a bus device reset. This
1142# can be changed at boot and runtime with the
1143# kern.cam.scsi_delay tunable/sysctl.
1144options CAMDEBUG
1145options CAM_DEBUG_BUS=-1
1146options CAM_DEBUG_TARGET=-1
1147options CAM_DEBUG_LUN=-1
1148options CAM_DEBUG_FLAGS=(CAM_DEBUG_INFO|CAM_DEBUG_TRACE|CAM_DEBUG_CDB)
1149options CAM_MAX_HIGHPOWER=4
1150options SCSI_NO_SENSE_STRINGS
1151options SCSI_NO_OP_STRINGS
1152options SCSI_DELAY=5000 # Be pessimistic about Joe SCSI device
1153
1154# Options for the CAM CDROM driver:
1155# CHANGER_MIN_BUSY_SECONDS: Guaranteed minimum time quantum for a changer LUN
1156# CHANGER_MAX_BUSY_SECONDS: Maximum time quantum per changer LUN, only
1157# enforced if there is I/O waiting for another LUN
1158# The compiled in defaults for these variables are 2 and 10 seconds,
1159# respectively.
1160#
1161# These can also be changed on the fly with the following sysctl variables:
1162# kern.cam.cd.changer.min_busy_seconds
1163# kern.cam.cd.changer.max_busy_seconds
1164#
1165options CHANGER_MIN_BUSY_SECONDS=2
1166options CHANGER_MAX_BUSY_SECONDS=10
1167
1168# Options for the CAM sequential access driver:
1169# SA_IO_TIMEOUT: Timeout for read/write/wfm operations, in minutes
1170# SA_SPACE_TIMEOUT: Timeout for space operations, in minutes
1171# SA_REWIND_TIMEOUT: Timeout for rewind operations, in minutes
1172# SA_ERASE_TIMEOUT: Timeout for erase operations, in minutes
1173# SA_1FM_AT_EOD: Default to model which only has a default one filemark at EOT.
1174options SA_IO_TIMEOUT=4
1175options SA_SPACE_TIMEOUT=60
1176options SA_REWIND_TIMEOUT=(2*60)
1177options SA_ERASE_TIMEOUT=(4*60)
1178options SA_1FM_AT_EOD
1179
1180# Optional timeout for the CAM processor target (pt) device
1181# This is specified in seconds. The default is 60 seconds.
1182options SCSI_PT_DEFAULT_TIMEOUT=60
1183
1184# Optional enable of doing SES passthrough on other devices (e.g., disks)
1185#
1186# Normally disabled because a lot of newer SCSI disks report themselves
1187# as having SES capabilities, but this can then clot up attempts to build
1188# build a topology with the SES device that's on the box these drives
1189# are in....
1190options SES_ENABLE_PASSTHROUGH
1191
1192
1193#####################################################################
1194# MISCELLANEOUS DEVICES AND OPTIONS
1195
1196# The `pty' device usually turns out to be ``effectively mandatory'',
1197# as it is required for `telnetd', `rlogind', `screen', `emacs', and
1198# `xterm', among others.
1199
1200device pty #Pseudo ttys
1201device nmdm #back-to-back tty devices
1202device md #Memory/malloc disk
1203device snp #Snoop device - to look at pty/vty/etc..
1204device ccd #Concatenated disk driver
1205device firmware #firmware(9) support
1206
1207# Kernel side iconv library
1208options LIBICONV
1209
1210# Size of the kernel message buffer. Should be N * pagesize.
1211options MSGBUF_SIZE=40960
1212
1213# Maximum size of a tty or pty input buffer.
1214options TTYHOG=8193
1215
1216
1217#####################################################################
1218# HARDWARE DEVICE CONFIGURATION
1219
1220# For ISA the required hints are listed.
1221# EISA, MCA, PCI and pccard are self identifying buses, so no hints
1222# are needed.
1223
1224#
1225# Mandatory devices:
1226#
1227
1228# The keyboard controller; it controls the keyboard and the PS/2 mouse.
1229device atkbdc
1230hint.atkbdc.0.at="isa"
1231hint.atkbdc.0.port="0x060"
1232
1233# The AT keyboard
1234device atkbd
1235hint.atkbd.0.at="atkbdc"
1236hint.atkbd.0.irq="1"
1237
1238# Options for atkbd:
1239options ATKBD_DFLT_KEYMAP # specify the built-in keymap
1240makeoptions ATKBD_DFLT_KEYMAP=jp.106
1241
1242# These options are valid for other keyboard drivers as well.
1243options KBD_DISABLE_KEYMAP_LOAD # refuse to load a keymap
1244options KBD_INSTALL_CDEV # install a CDEV entry in /dev
1245
1246# `flags' for atkbd:
1247# 0x01 Force detection of keyboard, else we always assume a keyboard
1248# 0x02 Don't reset keyboard, useful for some newer ThinkPads
1249# 0x03 Force detection and avoid reset, might help with certain
1250# dockingstations
1251# 0x04 Old-style (XT) keyboard support, useful for older ThinkPads
1252
1253# PS/2 mouse
1254device psm
1255hint.psm.0.at="atkbdc"
1256hint.psm.0.irq="12"
1257
1258# Options for psm:
1259options PSM_HOOKRESUME #hook the system resume event, useful
1260 #for some laptops
1261options PSM_RESETAFTERSUSPEND #reset the device at the resume event
1262
1263# Video card driver for VGA adapters.
1264device vga
1265hint.vga.0.at="isa"
1266
1267# Options for vga:
1268# Try the following option if the mouse pointer is not drawn correctly
1269# or font does not seem to be loaded properly. May cause flicker on
1270# some systems.
1271options VGA_ALT_SEQACCESS
1272
1273# If you can dispense with some vga driver features, you may want to
1274# use the following options to save some memory.
1275#options VGA_NO_FONT_LOADING # don't save/load font
1276#options VGA_NO_MODE_CHANGE # don't change video modes
1277
1278# Older video cards may require this option for proper operation.
1279options VGA_SLOW_IOACCESS # do byte-wide i/o's to TS and GDC regs
1280
1281# The following option probably won't work with the LCD displays.
1282options VGA_WIDTH90 # support 90 column modes
1283
1284options FB_DEBUG # Frame buffer debugging
1285
1286device splash # Splash screen and screen saver support
1287
1288# Various screen savers.
1289device blank_saver
1290device daemon_saver
1291device dragon_saver
1292device fade_saver
1293device fire_saver
1294device green_saver
1295device logo_saver
1296device rain_saver
1297device snake_saver
1298device star_saver
1299device warp_saver
1300
1301# The syscons console driver (sco color console compatible).
1302device sc
1303hint.sc.0.at="isa"
1304options MAXCONS=16 # number of virtual consoles
1305options SC_ALT_MOUSE_IMAGE # simplified mouse cursor in text mode
1306options SC_DFLT_FONT # compile font in
1307makeoptions SC_DFLT_FONT=cp850
1308options SC_DISABLE_KDBKEY # disable `debug' key
1309options SC_DISABLE_REBOOT # disable reboot key sequence
1310options SC_HISTORY_SIZE=200 # number of history buffer lines
1311options SC_MOUSE_CHAR=0x3 # char code for text mode mouse cursor
1312options SC_PIXEL_MODE # add support for the raster text mode
1313
1314# The following options will let you change the default colors of syscons.
1315options SC_NORM_ATTR=(FG_GREEN|BG_BLACK)
1316options SC_NORM_REV_ATTR=(FG_YELLOW|BG_GREEN)
1317options SC_KERNEL_CONS_ATTR=(FG_RED|BG_BLACK)
1318options SC_KERNEL_CONS_REV_ATTR=(FG_BLACK|BG_RED)
1319
1320# The following options will let you change the default behaviour of
1321# cut-n-paste feature
1322options SC_CUT_SPACES2TABS # convert leading spaces into tabs
1323options SC_CUT_SEPCHARS=\"x09\" # set of characters that delimit words
1324 # (default is single space - \"x20\")
1325
1326# If you have a two button mouse, you may want to add the following option
1327# to use the right button of the mouse to paste text.
1328options SC_TWOBUTTON_MOUSE
1329
1330# You can selectively disable features in syscons.
1331options SC_NO_CUTPASTE
1332options SC_NO_FONT_LOADING
1333options SC_NO_HISTORY
1334options SC_NO_SYSMOUSE
1335options SC_NO_SUSPEND_VTYSWITCH
1336
1337# `flags' for sc
1338# 0x80 Put the video card in the VESA 800x600 dots, 16 color mode
1339# 0x100 Probe for a keyboard device periodically if one is not present
1340
1341#
1342# Optional devices:
1343#
1344
1345#
1346# SCSI host adapters:
1347#
1348# adv: All Narrow SCSI bus AdvanSys controllers.
1349# adw: Second Generation AdvanSys controllers including the ADV940UW.
1350# aha: Adaptec 154x/1535/1640
1351# ahb: Adaptec 174x EISA controllers
1352# ahc: Adaptec 274x/284x/2910/293x/294x/394x/3950x/3960x/398X/4944/
1353# 19160x/29160x, aic7770/aic78xx
1354# ahd: Adaptec 29320/39320 Controllers.
1355# aic: Adaptec 6260/6360, APA-1460 (PC Card), NEC PC9801-100 (C-BUS)
1356# amd: Support for the AMD 53C974 SCSI host adapter chip as found on devices
1357# such as the Tekram DC-390(T).
1358# bt: Most Buslogic controllers: including BT-445, BT-54x, BT-64x, BT-74x,
1359# BT-75x, BT-946, BT-948, BT-956, BT-958, SDC3211B, SDC3211F, SDC3222F
1360# esp: NCR53c9x. Only for SBUS hardware right now.
1361# isp: Qlogic ISP 1020, 1040 and 1040B PCI SCSI host adapters,
1362# ISP 1240 Dual Ultra SCSI, ISP 1080 and 1280 (Dual) Ultra2,
1363# ISP 12160 Ultra3 SCSI,
1364# Qlogic ISP 2100 and ISP 2200 1Gb Fibre Channel host adapters.
1365# Qlogic ISP 2300 and ISP 2312 2Gb Fibre Channel host adapters.
1366# ispfw: Firmware module for Qlogic host adapters
1367# mpt: LSI-Logic MPT/Fusion 53c1020 or 53c1030 Ultra4
1368# or FC9x9 Fibre Channel host adapters.
1369# ncr: NCR 53C810, 53C825 self-contained SCSI host adapters.
1370# sym: Symbios/Logic 53C8XX family of PCI-SCSI I/O processors:
1371# 53C810, 53C810A, 53C815, 53C825, 53C825A, 53C860, 53C875,
1372# 53C876, 53C885, 53C895, 53C895A, 53C896, 53C897, 53C1510D,
1373# 53C1010-33, 53C1010-66.
1374# trm: Tekram DC395U/UW/F DC315U adapters.
1375# wds: WD7000
1376
1377#
1378# Note that the order is important in order for Buslogic ISA/EISA cards to be
1379# probed correctly.
1380#
1381device bt
1382hint.bt.0.at="isa"
1383hint.bt.0.port="0x330"
1384device adv
1385hint.adv.0.at="isa"
1386device adw
1387device aha
1388hint.aha.0.at="isa"
1389device aic
1390hint.aic.0.at="isa"
1391device ahb
1392device ahc
1393device ahd
1394device amd
1395device esp
1396device isp
1397hint.isp.0.disable="1"
1398hint.isp.0.role="3"
1399hint.isp.0.prefer_iomap="1"
1400hint.isp.0.prefer_memmap="1"
1401hint.isp.0.fwload_disable="1"
1402hint.isp.0.ignore_nvram="1"
1403hint.isp.0.fullduplex="1"
1404hint.isp.0.topology="lport"
1405hint.isp.0.topology="nport"
1406hint.isp.0.topology="lport-only"
1407hint.isp.0.topology="nport-only"
1408# we can't get u_int64_t types, nor can we get strings if it's got
1409# a leading 0x, hence this silly dodge.
1410hint.isp.0.portwnn="w50000000aaaa0000"
1411hint.isp.0.nodewnn="w50000000aaaa0001"
1412device ispfw
1413device mpt
1414device ncr
1415device sym
1416device trm
1417device wds
1418hint.wds.0.at="isa"
1419hint.wds.0.port="0x350"
1420hint.wds.0.irq="11"
1421hint.wds.0.drq="6"
1422
1423# The aic7xxx driver will attempt to use memory mapped I/O for all PCI
1424# controllers that have it configured only if this option is set. Unfortunately,
1425# this doesn't work on some motherboards, which prevents it from being the
1426# default.
1427options AHC_ALLOW_MEMIO
1428
1429# Dump the contents of the ahc controller configuration PROM.
1430options AHC_DUMP_EEPROM
1431
1432# Bitmap of units to enable targetmode operations.
1433options AHC_TMODE_ENABLE
1434
1435# Compile in Aic7xxx Debugging code.
1436options AHC_DEBUG
1437
1438# Aic7xxx driver debugging options. See sys/dev/aic7xxx/aic7xxx.h
1439options AHC_DEBUG_OPTS
1440
1441# Print register bitfields in debug output. Adds ~128k to driver
1442# See ahc(4).
1443options AHC_REG_PRETTY_PRINT
1444
1445# Compile in aic79xx debugging code.
1446options AHD_DEBUG
1447
1448# Aic79xx driver debugging options. Adds ~215k to driver. See ahd(4).
1449options AHD_DEBUG_OPTS=0xFFFFFFFF
1450
1451# Print human-readable register definitions when debugging
1452options AHD_REG_PRETTY_PRINT
1453
1454# Bitmap of units to enable targetmode operations.
1455options AHD_TMODE_ENABLE
1456
1457# The adw driver will attempt to use memory mapped I/O for all PCI
1458# controllers that have it configured only if this option is set.
1459options ADW_ALLOW_MEMIO
1460
1461# Options used in dev/isp/ (Qlogic SCSI/FC driver).
1462#
1463# ISP_TARGET_MODE - enable target mode operation
1464#
1465options ISP_TARGET_MODE=1
1466
1467# Options used in dev/sym/ (Symbios SCSI driver).
1468#options SYM_SETUP_LP_PROBE_MAP #-Low Priority Probe Map (bits)
1469 # Allows the ncr to take precedence
1470 # 1 (1<<0) -> 810a, 860
1471 # 2 (1<<1) -> 825a, 875, 885, 895
1472 # 4 (1<<2) -> 895a, 896, 1510d
1473#options SYM_SETUP_SCSI_DIFF #-HVD support for 825a, 875, 885
1474 # disabled:0 (default), enabled:1
1475#options SYM_SETUP_PCI_PARITY #-PCI parity checking
1476 # disabled:0, enabled:1 (default)
1477#options SYM_SETUP_MAX_LUN #-Number of LUNs supported
1478 # default:8, range:[1..64]
1479
1480# The 'dpt' driver provides support for old DPT controllers (http://www.dpt.com/).
1481# These have hardware RAID-{0,1,5} support, and do multi-initiator I/O.
1482# The DPT controllers are commonly re-licensed under other brand-names -
1483# some controllers by Olivetti, Dec, HP, AT&T, SNI, AST, Alphatronic, NEC and
1484# Compaq are actually DPT controllers.
1485#
1486# See src/sys/dev/dpt for debugging and other subtle options.
1487# DPT_MEASURE_PERFORMANCE Enables a set of (semi)invasive metrics. Various
1488# instruments are enabled. The tools in
1489# /usr/sbin/dpt_* assume these to be enabled.
1490# DPT_HANDLE_TIMEOUTS Normally device timeouts are handled by the DPT.
1491# If you ant the driver to handle timeouts, enable
1492# this option. If your system is very busy, this
1493# option will create more trouble than solve.
1494# DPT_TIMEOUT_FACTOR Used to compute the excessive amount of time to
1495# wait when timing out with the above option.
1496# DPT_DEBUG_xxxx These are controllable from sys/dev/dpt/dpt.h
1497# DPT_LOST_IRQ When enabled, will try, once per second, to catch
1498# any interrupt that got lost. Seems to help in some
1499# DPT-firmware/Motherboard combinations. Minimal
1500# cost, great benefit.
1501# DPT_RESET_HBA Make "reset" actually reset the controller
1502# instead of fudging it. Only enable this if you
1503# are 100% certain you need it.
1504
1505device dpt
1506
1507# DPT options
1508#!CAM# options DPT_MEASURE_PERFORMANCE
1509#!CAM# options DPT_HANDLE_TIMEOUTS
1510options DPT_TIMEOUT_FACTOR=4
1511options DPT_LOST_IRQ
1512options DPT_RESET_HBA
1513
1514#
1515# Compaq "CISS" RAID controllers (SmartRAID 5* series)
1516# These controllers have a SCSI-like interface, and require the
1517# CAM infrastructure.
1518#
1519device ciss
1520
1521#
1522# Intel Integrated RAID controllers.
1523# This driver was developed and is maintained by Intel. Contacts
1524# at Intel for this driver are
1525# "Kannanthanam, Boji T" <boji.t.kannanthanam@intel.com> and
1526# "Leubner, Achim" <achim.leubner@intel.com>.
1527#
1528device iir
1529
1530#
1531# Mylex AcceleRAID and eXtremeRAID controllers with v6 and later
1532# firmware. These controllers have a SCSI-like interface, and require
1533# the CAM infrastructure.
1534#
1535device mly
1536
1537#
1538# Compaq Smart RAID, Mylex DAC960 and AMI MegaRAID controllers. Only
1539# one entry is needed; the code will find and configure all supported
1540# controllers.
1541#
1542device ida # Compaq Smart RAID
1543device mlx # Mylex DAC960
1544device amr # AMI MegaRAID
1545
1546#
1547# 3ware ATA RAID
1548#
1549device twe # 3ware ATA RAID
1550
1551#
1552# The 'ATA' driver supports all ATA and ATAPI devices, including PC Card
1553# devices. You only need one "device ata" for it to find all
1554# PCI and PC Card ATA/ATAPI devices on modern machines.
1555device ata
1556device atadisk # ATA disk drives
1557device ataraid # ATA RAID drives
1558device atapicd # ATAPI CDROM drives
1559device atapifd # ATAPI floppy drives
1560device atapist # ATAPI tape drives
1561device atapicam # emulate ATAPI devices as SCSI ditto via CAM
1562 # needs CAM to be present (scbus & pass)
1563#
1564# For older non-PCI, non-PnPBIOS systems, these are the hints lines to add:
1565hint.ata.0.at="isa"
1566hint.ata.0.port="0x1f0"
1567hint.ata.0.irq="14"
1568hint.ata.1.at="isa"
1569hint.ata.1.port="0x170"
1570hint.ata.1.irq="15"
1571
1572#
1573# The following options are valid on the ATA driver:
1574#
1575# ATA_STATIC_ID: controller numbering is static ie depends on location
1576# else the device numbers are dynamically allocated.
1577
1578options ATA_STATIC_ID
1579
1580#
1581# Standard floppy disk controllers and floppy tapes, supports
1582# the Y-E DATA External FDD (PC Card)
1583#
1584device fdc
1585hint.fdc.0.at="isa"
1586hint.fdc.0.port="0x3F0"
1587hint.fdc.0.irq="6"
1588hint.fdc.0.drq="2"
1589#
1590# FDC_DEBUG enables floppy debugging. Since the debug output is huge, you
1591# gotta turn it actually on by setting the variable fd_debug with DDB,
1592# however.
1593options FDC_DEBUG
1594#
1595# Activate this line if you happen to have an Insight floppy tape.
1596# Probing them proved to be dangerous for people with floppy disks only,
1597# so it's "hidden" behind a flag:
1598#hint.fdc.0.flags="1"
1599
1600# Specify floppy devices
1601hint.fd.0.at="fdc0"
1602hint.fd.0.drive="0"
1603hint.fd.1.at="fdc0"
1604hint.fd.1.drive="1"
1605
1606#
1607# sio: serial ports (see sio(4)), including support for various
1608# PC Card devices, such as Modem and NICs (see etc/defaults/pccard.conf)
1609#
1610device sio
1611hint.sio.0.at="isa"
1612hint.sio.0.port="0x3F8"
1613hint.sio.0.flags="0x10"
1614hint.sio.0.irq="4"
1615
1616# Options for sio:
1617options COM_ESP # Code for Hayes ESP.
1618options COM_MULTIPORT # Code for some cards with shared IRQs.
1619options CONSPEED=115200 # Speed for serial console
1620 # (default 9600).
1621
1622# `flags' specific to sio(4). See below for flags used by both sio(4) and
1623# uart(4).
1624# 0x20 force this unit to be the console (unless there is another
1625# higher priority console). This replaces the COMCONSOLE option.
1626# 0x40 reserve this unit for low level console operations. Do not
1627# access the device in any normal way.
1628# PnP `flags'
1629# 0x1 disable probing of this device. Used to prevent your modem
1630# from being attached as a PnP modem.
1631# Other flags for sio that aren't documented in the man page.
1632# 0x20000 enable hardware RTS/CTS and larger FIFOs. Only works for
1633# ST16650A-compatible UARTs.
1634
1635#
1636# uart: newbusified driver for serial interfaces. It consolidates the sio(4),
1637# sab(4) and zs(4) drivers.
1638#
1639device uart
1640
1641# Options for uart(4)
1642options UART_PPS_ON_CTS # Do time pulse capturing using CTS
1643 # instead of DCD.
1644
1645# The following hint should only be used for pure ISA devices. It is not
1646# needed otherwise. Use of hints is strongly discouraged.
1647hint.uart.0.at="isa"
1648
1649# The following 3 hints are used when the UART is a system device (i.e., a
1650# console or debug port), but only on platforms that don't have any other
1651# means to pass the information to the kernel. The unit number of the hint
1652# is only used to bundle the hints together. There is no relation to the
1653# unit number of the probed UART.
1654hint.uart.0.port="0x3f8"
1655hint.uart.0.flags="0x10"
1656hint.uart.0.baud="115200"
1657
1658# `flags' for serial drivers that support consoles like sio(4) and uart(4):
1659# 0x10 enable console support for this unit. Other console flags
1660# (if applicable) are ignored unless this is set. Enabling
1661# console support does not make the unit the preferred console.
1662# Boot with -h or set boot_serial=YES in the loader. For sio(4)
1663# specifically, the 0x20 flag can also be set (see above).
1664# Currently, at most one unit can have console support; the
1665# first one (in config file order) with this flag set is
1666# preferred. Setting this flag for sio0 gives the old behaviour.
1667# 0x80 use this port for serial line gdb support in ddb. Also known
1668# as debug port.
1669#
1670
1671# Options for serial drivers that support consoles:
1672options BREAK_TO_DEBUGGER # A BREAK on a serial console goes to
1673 # ddb, if available.
1674
1675# Solaris implements a new BREAK which is initiated by a character
1676# sequence CR ~ ^b which is similar to a familiar pattern used on
1677# Sun servers by the Remote Console.
1678options ALT_BREAK_TO_DEBUGGER
1679
1680# PCI Universal Communications driver
1681# Supports various single and multi port PCI serial cards. Maybe later
1682# also the parallel ports on combination serial/parallel cards. New cards
1683# can be added in src/sys/dev/puc/pucdata.c.
1684#
1685# If the PUC_FASTINTR option is used the driver will try to use fast
1686# interrupts. The card must then be the only user of that interrupt.
1687# Interrupts cannot be shared when using PUC_FASTINTR.
1688device puc
1689options PUC_FASTINTR
1690
1691#
1692# Network interfaces:
1693#
1694# MII bus support is required for some PCI 10/100 ethernet NICs,
1695# namely those which use MII-compliant transceivers or implement
1696# transceiver control interfaces that operate like an MII. Adding
1697# "device miibus0" to the kernel config pulls in support for
1698# the generic miibus API and all of the PHY drivers, including a
1699# generic one for PHYs that aren't specifically handled by an
1700# individual driver.
1701device miibus
1702
1703# an: Aironet 4500/4800 802.11 wireless adapters. Supports the PCMCIA,
1704# PCI and ISA varieties.
1705# awi: Support for IEEE 802.11 PC Card devices using the AMD Am79C930 and
1706# Harris (Intersil) Chipset with PCnetMobile firmware by AMD.
1707# bge: Support for gigabit ethernet adapters based on the Broadcom
1708# BCM570x family of controllers, including the 3Com 3c996-T,
1709# the Netgear GA302T, the SysKonnect SK-9D21 and SK-9D41, and
1710# the embedded gigE NICs on Dell PowerEdge 2550 servers.
1711# cm: Arcnet SMC COM90c26 / SMC COM90c56
1712# (and SMC COM90c66 in '56 compatibility mode) adapters.
1713# cnw: Xircom CNW/Netware Airsurfer PC Card adapter
1714# dc: Support for PCI fast ethernet adapters based on the DEC/Intel 21143
1715# and various workalikes including:
1716# the ADMtek AL981 Comet and AN985 Centaur, the ASIX Electronics
1717# AX88140A and AX88141, the Davicom DM9100 and DM9102, the Lite-On
1718# 82c168 and 82c169 PNIC, the Lite-On/Macronix LC82C115 PNIC II
1719# and the Macronix 98713/98713A/98715/98715A/98725 PMAC. This driver
1720# replaces the old al, ax, dm, pn and mx drivers. List of brands:
1721# Digital DE500-BA, Kingston KNE100TX, D-Link DFE-570TX, SOHOware SFA110,
1722# SVEC PN102-TX, CNet Pro110B, 120A, and 120B, Compex RL100-TX,
1723# LinkSys LNE100TX, LNE100TX V2.0, Jaton XpressNet, Alfa Inc GFC2204,
1724# KNE110TX.
1725# de: Digital Equipment DC21040
1726# em: Intel Pro/1000 Gigabit Ethernet 82542, 82543, 82544 based adapters.
1727# ep: 3Com 3C509, 3C529, 3C556, 3C562D, 3C563D, 3C572, 3C574X, 3C579, 3C589
1728# and PC Card devices using these chipsets.
1729# ex: Intel EtherExpress Pro/10 and other i82595-based adapters,
1730# Olicom Ethernet PC Card devices.
1731# fe: Fujitsu MB86960A/MB86965A Ethernet
1732# fea: DEC DEFEA EISA FDDI adapter
1733# fpa: Support for the Digital DEFPA PCI FDDI. `device fddi' is also needed.
1734# fxp: Intel EtherExpress Pro/100B
1735# (hint of prefer_iomap can be done to prefer I/O instead of Mem mapping)
1736# hme: Sun HME (Happy Meal Ethernet)
1737# le: AMD Am7900 LANCE and Am79C9xx PCnet
1738# lge: Support for PCI gigabit ethernet adapters based on the Level 1
1739# LXT1001 NetCellerator chipset. This includes the D-Link DGE-500SX,
1740# SMC TigerCard 1000 (SMC9462SX), and some Addtron cards.
1741# lmc: Support for the LMC/SBE wide-area network interface cards.
1742# my: Myson Fast Ethernet (MTD80X, MTD89X)
1743# nge: Support for PCI gigabit ethernet adapters based on the National
1744# Semiconductor DP83820 and DP83821 chipset. This includes the
1745# SMC EZ Card 1000 (SMC9462TX), D-Link DGE-500T, Asante FriendlyNet
1746# GigaNIX 1000TA and 1000TPC, the Addtron AEG320T, the Surecom
1747# EP-320G-TX and the Netgear GA622T.
1748# pcn: Support for PCI fast ethernet adapters based on the AMD Am79c97x
1749# chipsets, including the PCnet/FAST, PCnet/FAST+, PCnet/PRO and
1750# PCnet/Home. These were previously handled by the lnc driver (and
1751# still will be if you leave this driver out of the kernel).
1752# rl: Support for PCI fast ethernet adapters based on the RealTek 8129/8139
1753# chipset. Note that the RealTek driver defaults to using programmed
1754# I/O to do register accesses because memory mapped mode seems to cause
1755# severe lockups on SMP hardware. This driver also supports the
1756# Accton EN1207D `Cheetah' adapter, which uses a chip called
1757# the MPX 5030/5038, which is either a RealTek in disguise or a
1758# RealTek workalike. Note that the D-Link DFE-530TX+ uses the RealTek
1759# chipset and is supported by this driver, not the 'vr' driver.
1760# sf: Support for Adaptec Duralink PCI fast ethernet adapters based on the
1761# Adaptec AIC-6915 "starfire" controller.
1762# This includes dual and quad port cards, as well as one 100baseFX card.
1763# Most of these are 64-bit PCI devices, except for one single port
1764# card which is 32-bit.
1765# sis: Support for NICs based on the Silicon Integrated Systems SiS 900,
1766# SiS 7016 and NS DP83815 PCI fast ethernet controller chips.
1767# sbsh: Support for Granch SBNI16 SHDSL modem PCI adapters
1768# sk: Support for the SysKonnect SK-984x series PCI gigabit ethernet NICs.
1769# This includes the SK-9841 and SK-9842 single port cards (single mode
1770# and multimode fiber) and the SK-9843 and SK-9844 dual port cards
1771# (also single mode and multimode).
1772# The driver will autodetect the number of ports on the card and
1773# attach each one as a separate network interface.
1774# sn: Support for ISA and PC Card Ethernet devices using the
1775# SMC91C90/92/94/95 chips.
1776# ste: Sundance Technologies ST201 PCI fast ethernet controller, includes
1777# the D-Link DFE-550TX.
1778# ti: Support for PCI gigabit ethernet NICs based on the Alteon Networks
1779# Tigon 1 and Tigon 2 chipsets. This includes the Alteon AceNIC, the
1780# 3Com 3c985, the Netgear GA620 and various others. Note that you will
1781# probably want to bump up NMBCLUSTERS a lot to use this driver.
1782# tl: Support for the Texas Instruments TNETE100 series 'ThunderLAN'
1783# cards and integrated ethernet controllers. This includes several
1784# Compaq Netelligent 10/100 cards and the built-in ethernet controllers
1785# in several Compaq Prosignia, Proliant and Deskpro systems. It also
1786# supports several Olicom 10Mbps and 10/100 boards.
1787# tx: SMC 9432 TX, BTX and FTX cards. (SMC EtherPower II series)
1788# txp: Support for 3Com 3cR990 cards with the "Typhoon" chipset
1789# vr: Support for various fast ethernet adapters based on the VIA
1790# Technologies VT3043 `Rhine I' and VT86C100A `Rhine II' chips,
1791# including the D-Link DFE530TX (see 'rl' for DFE530TX+), the Hawking
1792# Technologies PN102TX, and the AOpen/Acer ALN-320.
1793# vx: 3Com 3C590 and 3C595
1794# wb: Support for fast ethernet adapters based on the Winbond W89C840F chip.
1795# Note: this is not the same as the Winbond W89C940F, which is a
1796# NE2000 clone.
1797# wi: Lucent WaveLAN/IEEE 802.11 PCMCIA adapters. Note: this supports both
1798# the PCMCIA and ISA cards: the ISA card is really a PCMCIA to ISA
1799# bridge with a PCMCIA adapter plugged into it.
1800# xe: Xircom/Intel EtherExpress Pro100/16 PC Card ethernet controller,
1801# Accton Fast EtherCard-16, Compaq Netelligent 10/100 PC Card,
1802# Toshiba 10/100 Ethernet PC Card, Xircom 16-bit Ethernet + Modem 56
1803# xl: Support for the 3Com 3c900, 3c905, 3c905B and 3c905C (Fast)
1804# Etherlink XL cards and integrated controllers. This includes the
1805# integrated 3c905B-TX chips in certain Dell Optiplex and Dell
1806# Precision desktop machines and the integrated 3c905-TX chips
1807# in Dell Latitude laptop docking stations.
1808# Also supported: 3Com 3c980(C)-TX, 3Com 3cSOHO100-TX, 3Com 3c450-TX
1809
1810# Order for ISA/EISA devices is important here
1811
1812device cm
1813hint.cm.0.at="isa"
1814hint.cm.0.port="0x2e0"
1815hint.cm.0.irq="9"
1816hint.cm.0.maddr="0xdc000"
1817device ep
1818device ex
1819device fe
1820hint.fe.0.at="isa"
1821hint.fe.0.port="0x300"
1822device fea
1823device sn
1824hint.sn.0.at="isa"
1825hint.sn.0.port="0x300"
1826hint.sn.0.irq="10"
1827device an
1828device awi
1829device cnw
1830device wi
1831device xe
1832
1833# PCI Ethernet NICs that use the common MII bus controller code.
1834device dc # DEC/Intel 21143 and various workalikes
1835device fxp # Intel EtherExpress PRO/100B (82557, 82558)
1836hint.fxp.0.prefer_iomap="0"
1837device hme # Sun HME (Happy Meal Ethernet)
1838device my # Myson Fast Ethernet (MTD80X, MTD89X)
1839device rl # RealTek 8129/8139
1840device pcn # AMD Am79C97x PCI 10/100 NICs
1841device sf # Adaptec AIC-6915 (``Starfire'')
1842device sbsh # Granch SBNI16 SHDSL modem
1843device sis # Silicon Integrated Systems SiS 900/SiS 7016
1844device ste # Sundance ST201 (D-Link DFE-550TX)
1845device tl # Texas Instruments ThunderLAN
1846device tx # SMC EtherPower II (83c170 ``EPIC'')
1847device vr # VIA Rhine, Rhine II
1848device wb # Winbond W89C840F
1849device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
1850
1851# PCI Ethernet NICs.
1852device de # DEC/Intel DC21x4x (``Tulip'')
1853device le # AMD Am7900 LANCE and Am79C9xx PCnet
1854device txp # 3Com 3cR990 (``Typhoon'')
1855device vx # 3Com 3c590, 3c595 (``Vortex'')
1856
1857# PCI Gigabit & FDDI NICs.
1858device bge
1859device lge
1860device nge
1861device sk
1862device ti
1863device fpa
1864
1865# PCI WAN adapters.
1866device lmc
1867
1868# Use "private" jumbo buffers allocated exclusively for the ti(4) driver.
1869# This option is incompatible with the TI_JUMBO_HDRSPLIT option below.
1870#options TI_PRIVATE_JUMBOS
1871# Turn on the header splitting option for the ti(4) driver firmware. This
1872# only works for Tigon II chips, and has no effect for Tigon I chips.
1873options TI_JUMBO_HDRSPLIT
1874
1875# These two options allow manipulating the mbuf cluster size and mbuf size,
1876# respectively. Be very careful with NIC driver modules when changing
1877# these from their default values, because that can potentially cause a
1878# mismatch between the mbuf size assumed by the kernel and the mbuf size
1879# assumed by a module. The only driver that currently has the ability to
1880# detect a mismatch is ti(4).
1881options MCLSHIFT=12 # mbuf cluster shift in bits, 12 == 4KB
1882options MSIZE=512 # mbuf size in bytes
1883
1884#
1885# ATM related options (Cranor version)
1886# (note: this driver cannot be used with the HARP ATM stack)
1887#
1888# The `en' device provides support for Efficient Networks (ENI)
1889# ENI-155 PCI midway cards, and the Adaptec 155Mbps PCI ATM cards (ANA-59x0).
1890#
1891# The `hatm' device provides support for Fore/Marconi HE155 and HE622
1892# ATM PCI cards.
1893#
1894# The `fatm' device provides support for Fore PCA200E ATM PCI cards.
1895#
1896# The `patm' device provides support for IDT77252 based cards like
1897# ProSum's ProATM-155 and ProATM-25 and IDT's evaluation boards.
1898#
1899# atm device provides generic atm functions and is required for
1900# atm devices.
1901# NATM enables the netnatm protocol family that can be used to
1902# bypass TCP/IP.
1903#
1904# utopia provides the access to the ATM PHY chips and is required for en,
1905# hatm and fatm.
1906#
1907# the current driver supports only PVC operations (no atm-arp, no multicast).
1908# for more details, please read the original documents at
1909# http://www.ccrc.wustl.edu/pub/chuck/tech/bsdatm/bsdatm.html
1910#
1911device atm
1912device en
1913device fatm #Fore PCA200E
1914device hatm #Fore/Marconi HE155/622
1915device patm #IDT77252 cards (ProATM and IDT)
1916device utopia #ATM PHY driver
1917options NATM #native ATM
1918
1919options LIBMBPOOL #needed by patm, iatm
1920
1921#
1922# Sound drivers
1923#
1924# sound: The generic sound driver.
1925#
1926
1927device sound
1928
1929#
1930# snd_*: Device-specific drivers.
1931#
1932# The flags of the device tells the device a bit more info about the
1933# device that normally is obtained through the PnP interface.
1934# bit 2..0 secondary DMA channel;
1935# bit 4 set if the board uses two dma channels;
1936# bit 15..8 board type, overrides autodetection; leave it
1937# zero if don't know what to put in (and you don't,
1938# since this is unsupported at the moment...).
1939#
1940# snd_ad1816: Analog Devices AD1816 ISA PnP/non-PnP.
1941# snd_als4000: Avance Logic ALS4000 PCI.
1942# snd_atiixp: ATI IXP 200/300/400 PCI.
1943# snd_au88x0 Aureal Vortex 1/2/Advantage PCI. This driver
1944# lacks support for playback and recording.
1945# snd_audiocs: Crystal Semiconductor CS4231 SBus/EBus. Only
1946# for sparc64.
1947# snd_cmi: CMedia CMI8338/CMI8738 PCI.
1948# snd_cs4281: Crystal Semiconductor CS4281 PCI.
1949# snd_csa: Crystal Semiconductor CS461x/428x PCI. (except
1950# 4281)
1951# snd_ds1: Yamaha DS-1 PCI.
1952# snd_emu10k1: Creative EMU10K1 PCI and EMU10K2 (Audigy) PCI.
1953# snd_es137x: Ensoniq AudioPCI ES137x PCI.
1954# snd_ess: Ensoniq ESS ISA PnP/non-PnP, to be used in
1955# conjunction with snd_sbc.
1956# snd_fm801: Forte Media FM801 PCI.
1957# snd_gusc: Gravis UltraSound ISA PnP/non-PnP.
1958# snd_ich: Intel ICH PCI and some more audio controllers
1959# embedded in a chipset, for example nVidia
1960# nForce controllers.
1961# snd_maestro: ESS Technology Maestro-1/2x PCI.
1962# snd_maestro3: ESS Technology Maestro-3/Allegro PCI.
1963# snd_mss: Microsoft Sound System ISA PnP/non-PnP.
1964# snd_neomagic: Neomagic 256 AV/ZX PCI.
1965# snd_sb16: Creative SoundBlaster16, to be used in
1966# conjuction with snd_sbc.
1967# snd_sb8: Creative SoundBlaster (pre-16), to be used in
1968# conjuction with snd_sbc.
1969# snd_sbc: Creative SoundBlaster ISA PnP/non-PnP.
1970# Supports ESS and Avance ISA chips as well.
1971# snd_solo: ESS Solo-1x PCI.
1972# snd_t4dwave: Trident 4DWave DX/NX PCI, Sis 7018 PCI and Acer Labs
1973# M5451 PCI.
1974# snd_via8233: VIA VT8233x PCI.
1975# snd_via82c686: VIA VT82C686A PCI.
1976# snd_vibes: S3 Sonicvibes PCI.
1977# snd_uaudio: USB audio.
1978
1979device snd_ad1816
1980device snd_als4000
1981device snd_atiixp
1982#device snd_au88x0
1983#device snd_audiocs
1984device snd_cmi
1985device snd_cs4281
1986device snd_csa
1987device snd_ds1
1988device snd_emu10k1
1989device snd_es137x
1990device snd_ess
1991device snd_fm801
1992device snd_gusc
1993device snd_ich
1994device snd_maestro
1995device snd_maestro3
1996device snd_mss
1997device snd_neomagic
1998device snd_sb16
1999device snd_sb8
2000device snd_sbc
2001device snd_solo
2002device snd_t4dwave
2003device snd_via8233
2004device snd_via82c686
2005device snd_vibes
2006device snd_uaudio
2007
2008# For non-pnp sound cards:
2009hint.pcm.0.at="isa"
2010hint.pcm.0.irq="10"
2011hint.pcm.0.drq="1"
2012hint.pcm.0.flags="0x0"
2013hint.sbc.0.at="isa"
2014hint.sbc.0.port="0x220"
2015hint.sbc.0.irq="5"
2016hint.sbc.0.drq="1"
2017hint.sbc.0.flags="0x15"
2018hint.gusc.0.at="isa"
2019hint.gusc.0.port="0x220"
2020hint.gusc.0.irq="5"
2021hint.gusc.0.drq="1"
2022hint.gusc.0.flags="0x13"
2023
2024#
2025# IEEE-488 hardware:
2026# pcii: PCIIA cards (uPD7210 based isa cards)
2027# tnt4882: National Instruments PCI-GPIB card.
2028
2029device pcii
2030hint.pcii.0.at="isa"
2031hint.pcii.0.port="0x2e1"
2032hint.pcii.0.irq="5"
2033hint.pcii.0.drq="1"
2034
2035device tnt4882
2036
2037#
2038# Miscellaneous hardware:
2039#
2040# scd: Sony CD-ROM using proprietary (non-ATAPI) interface
2041# mcd: Mitsumi CD-ROM using proprietary (non-ATAPI) interface
2042# bktr: Brooktree bt848/848a/849a/878/879 video capture and TV Tuner board
2043# cy: Cyclades serial driver
2044# joy: joystick (including IO DATA PCJOY PC Card joystick)
2045# rc: RISCom/8 multiport card
2046# rp: Comtrol Rocketport(ISA/PCI) - single card
2047# si: Specialix SI/XIO 4-32 port terminal multiplexor
2048# nmdm: nullmodem terminal driver (see nmdm(4))
2049
2050# Notes on the Comtrol Rocketport driver:
2051#
2052# The exact values used for rp0 depend on how many boards you have
2053# in the system. The manufacturer's sample configs are listed as:
2054#
2055# device rp # core driver support
2056#
2057# Comtrol Rocketport ISA single card
2058# hint.rp.0.at="isa"
2059# hint.rp.0.port="0x280"
2060#
2061# If instead you have two ISA cards, one installed at 0x100 and the
2062# second installed at 0x180, then you should add the following to
2063# your kernel probe hints:
2064# hint.rp.0.at="isa"
2065# hint.rp.0.port="0x100"
2066# hint.rp.1.at="isa"
2067# hint.rp.1.port="0x180"
2068#
2069# For 4 ISA cards, it might be something like this:
2070# hint.rp.0.at="isa"
2071# hint.rp.0.port="0x180"
2072# hint.rp.1.at="isa"
2073# hint.rp.1.port="0x100"
2074# hint.rp.2.at="isa"
2075# hint.rp.2.port="0x340"
2076# hint.rp.3.at="isa"
2077# hint.rp.3.port="0x240"
2078#
2079# For PCI cards, you need no hints.
2080
2081# Mitsumi CD-ROM
2082device mcd
2083hint.mcd.0.at="isa"
2084hint.mcd.0.port="0x300"
2085# for the Sony CDU31/33A CDROM
2086device scd
2087hint.scd.0.at="isa"
2088hint.scd.0.port="0x230"
2089device joy # PnP aware, hints for nonpnp only
2090hint.joy.0.at="isa"
2091hint.joy.0.port="0x201"
2092device rc
2093hint.rc.0.at="isa"
2094hint.rc.0.port="0x220"
2095hint.rc.0.irq="12"
2096device rp
2097hint.rp.0.at="isa"
2098hint.rp.0.port="0x280"
2099device si
2100options SI_DEBUG
2101hint.si.0.at="isa"
2102hint.si.0.maddr="0xd0000"
2103hint.si.0.irq="12"
2104device nmdm
2105
2106#
2107# The 'bktr' device is a PCI video capture device using the Brooktree
2108# bt848/bt848a/bt849a/bt878/bt879 chipset. When used with a TV Tuner it forms a
2109# TV card, e.g. Miro PC/TV, Hauppauge WinCast/TV WinTV, VideoLogic Captivator,
2110# Intel Smart Video III, AverMedia, IMS Turbo, FlyVideo.
2111#
2112# options OVERRIDE_CARD=xxx
2113# options OVERRIDE_TUNER=xxx
2114# options OVERRIDE_MSP=1
2115# options OVERRIDE_DBX=1
2116# These options can be used to override the auto detection
2117# The current values for xxx are found in src/sys/dev/bktr/bktr_card.h
2118# Using sysctl(8) run-time overrides on a per-card basis can be made
2119#
2120# options BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_PAL
2121# or
2122# options BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_NTSC
2123# Specifies the default video capture mode.
2124# This is required for Dual Crystal (28&35Mhz) boards where PAL is used
2125# to prevent hangs during initialisation, e.g. VideoLogic Captivator PCI.
2126#
2127# options BKTR_USE_PLL
2128# This is required for PAL or SECAM boards with a 28Mhz crystal and no 35Mhz
2129# crystal, e.g. some new Bt878 cards.
2130#
2131# options BKTR_GPIO_ACCESS
2132# This enable IOCTLs which give user level access to the GPIO port.
2133#
2134# options BKTR_NO_MSP_RESET
2135# Prevents the MSP34xx reset. Good if you initialise the MSP in another OS first
2136#
2137# options BKTR_430_FX_MODE
2138# Switch Bt878/879 cards into Intel 430FX chipset compatibility mode.
2139#
2140# options BKTR_SIS_VIA_MODE
2141# Switch Bt878/879 cards into SIS/VIA chipset compatibility mode which is
2142# needed for some old SiS and VIA chipset motherboards.
2143# This also allows Bt878/879 chips to work on old OPTi (<1997) chipset
2144# motherboards and motherboards with bad or incomplete PCI 2.1 support.
2145# As a rough guess, old = before 1998
2146#
2147# options BKTR_NEW_MSP34XX_DRIVER
2148# Use new, more complete initialization scheme for the msp34* soundchip.
2149# Should fix stereo autodetection if the old driver does only output
2150# mono sound.
2151
2152#
2153# options BKTR_USE_FREEBSD_SMBUS
2154# Compile with FreeBSD SMBus implementation
2155#
2156# Brooktree driver has been ported to the new I2C framework. Thus,
2157# you'll need to have the following 3 lines in the kernel config.
2158# device smbus
2159# device iicbus
2160# device iicbb
2161# device iicsmb
2162# The iic and smb devices are only needed if you want to control other
2163# I2C slaves connected to the external connector of some cards.
2164#
2165device bktr
2166
2167#
2168# PC Card/PCMCIA and Cardbus
2169#
2170# pccbb: pci/cardbus bridge implementing YENTA interface
2171# pccard: pccard slots
2172# cardbus: cardbus slots
2173device cbb
2174device pccard
2175device cardbus
2176
2177#
2178# SMB bus
2179#
2180# System Management Bus support is provided by the 'smbus' device.
2181# Access to the SMBus device is via the 'smb' device (/dev/smb*),
2182# which is a child of the 'smbus' device.
2183#
2184# Supported devices:
2185# smb standard I/O through /dev/smb*
2186#
2187# Supported SMB interfaces:
2188# iicsmb I2C to SMB bridge with any iicbus interface
2189# bktr brooktree848 I2C hardware interface
2190# intpm Intel PIIX4 (82371AB, 82443MX) Power Management Unit
2191# alpm Acer Aladdin-IV/V/Pro2 Power Management Unit
2192# ichsmb Intel ICH SMBus controller chips (82801AA, 82801AB, 82801BA)
2193# viapm VIA VT82C586B/596B/686A and VT8233 Power Management Unit
2194# amdpm AMD 756 Power Management Unit
2195# amdsmb AMD 8111 SMBus 2.0 Controller
2196# nfpm NVIDIA nForce Power Management Unit
2197# nfsmb NVIDIA nForce2/3/4 MCP SMBus 2.0 Controller
2198#
2199device smbus # Bus support, required for smb below.
2200
2201device intpm
2202device alpm
2203device ichsmb
2204device viapm
2205device amdpm
2206device amdsmb
2207device nfpm
2208device nfsmb
2209
2210device smb
2211
2212#
2213# I2C Bus
2214#
2215# Philips i2c bus support is provided by the `iicbus' device.
2216#
2217# Supported devices:
2218# ic i2c network interface
2219# iic i2c standard io
2220# iicsmb i2c to smb bridge. Allow i2c i/o with smb commands.
2221#
2222# Supported interfaces:
2223# bktr brooktree848 I2C software interface
2224#
2225# Other:
2226# iicbb generic I2C bit-banging code (needed by lpbb, bktr)
2227#
2228device iicbus # Bus support, required for ic/iic/iicsmb below.
2229device iicbb
2230
2231device ic
2232device iic
2233device iicsmb # smb over i2c bridge
2234
2235# Parallel-Port Bus
2236#
2237# Parallel port bus support is provided by the `ppbus' device.
2238# Multiple devices may be attached to the parallel port, devices
2239# are automatically probed and attached when found.
2240#
2241# Supported devices:
2242# vpo Iomega Zip Drive
2243# Requires SCSI disk support ('scbus' and 'da'), best
2244# performance is achieved with ports in EPP 1.9 mode.
2245# lpt Parallel Printer
2246# plip Parallel network interface
2247# ppi General-purpose I/O ("Geek Port") + IEEE1284 I/O
2248# pps Pulse per second Timing Interface
2249# lpbb Philips official parallel port I2C bit-banging interface
2250#
2251# Supported interfaces:
2252# ppc ISA-bus parallel port interfaces.
2253#
2254
2255options PPC_PROBE_CHIPSET # Enable chipset specific detection
2256 # (see flags in ppc(4))
2257options DEBUG_1284 # IEEE1284 signaling protocol debug
2258options PERIPH_1284 # Makes your computer act as an IEEE1284
2259 # compliant peripheral
2260options DONTPROBE_1284 # Avoid boot detection of PnP parallel devices
2261options VP0_DEBUG # ZIP/ZIP+ debug
2262options LPT_DEBUG # Printer driver debug
2263options PPC_DEBUG # Parallel chipset level debug
2264options PLIP_DEBUG # Parallel network IP interface debug
2265options PCFCLOCK_VERBOSE # Verbose pcfclock driver
2266options PCFCLOCK_MAX_RETRIES=5 # Maximum read tries (default 10)
2267
2268device ppc
2269hint.ppc.0.at="isa"
2270hint.ppc.0.irq="7"
2271device ppbus
2272device vpo
2273device lpt
2274device plip
2275device ppi
2276device pps
2277device lpbb
2278device pcfclock
2279
2280# Kernel BOOTP support
2281
2282options BOOTP # Use BOOTP to obtain IP address/hostname
2283 # Requires NFSCLIENT and NFS_ROOT
2284options BOOTP_NFSROOT # NFS mount root filesystem using BOOTP info
2285options BOOTP_NFSV3 # Use NFS v3 to NFS mount root
2286options BOOTP_COMPAT # Workaround for broken bootp daemons.
2287options BOOTP_WIRED_TO=fxp0 # Use interface fxp0 for BOOTP
2288
2289#
2290# Add software watchdog routines.
2291#
2292options SW_WATCHDOG
2293
2294#
2295# Disable swapping of stack pages. This option removes all
2296# code which actually performs swapping, so it's not possible to turn
2297# it back on at run-time.
2298#
2299# This is sometimes usable for systems which don't have any swap space
2300# (see also sysctls "vm.defer_swapspace_pageouts" and
2301# "vm.disable_swapspace_pageouts")
2302#
2303#options NO_SWAPPING
2304
2305# Set the number of sf_bufs to allocate. sf_bufs are virtual buffers
2306# for sendfile(2) that are used to map file VM pages, and normally
2307# default to a quantity that is roughly 16*MAXUSERS+512. You would
2308# typically want about 4 of these for each simultaneous file send.
2309#
2310options NSFBUFS=1024
2311
2312#
2313# Enable extra debugging code for locks. This stores the filename and
2314# line of whatever acquired the lock in the lock itself, and change a
2315# number of function calls to pass around the relevant data. This is
2316# not at all useful unless you are debugging lock code. Also note
2317# that it is likely to break e.g. fstat(1) unless you recompile your
2318# userland with -DDEBUG_LOCKS as well.
2319#
2320options DEBUG_LOCKS
2321
2322
2323#####################################################################
2324# USB support
2325# UHCI controller
2326device uhci
2327# OHCI controller
2328device ohci
2329# EHCI controller
2330device ehci
2331# SL811 Controller
2332device slhci
2333# General USB code (mandatory for USB)
2334device usb
2335#
2336# USB Double Bulk Pipe devices
2337device udbp
2338# USB Fm Radio
2339device ufm
2340# Generic USB device driver
2341device ugen
2342# Human Interface Device (anything with buttons and dials)
2343device uhid
2344# USB keyboard
2345device ukbd
2346# USB printer
2347device ulpt
2348# USB Iomega Zip 100 Drive (Requires scbus and da)
2349device umass
2350# USB support for Belkin F5U109 and Magic Control Technology serial adapters
2351device umct
2352# USB modem support
2353device umodem
2354# USB mouse
2355device ums
2356# Diamond Rio 500 Mp3 player
2357device urio
2358# USB scanners
2359device uscanner
2360#
2361# USB serial support
2362device ucom
2363# USB support for Belkin F5U103 and compatible serial adapters
2364device ubsa
2365# USB support for BWCT console serial adapters
2366device ubser
2367# USB support for serial adapters based on the FT8U100AX and FT8U232AM
2368device uftdi
2369# USB support for Prolific PL-2303 serial adapters
2370device uplcom
2371# USB Visor and Palm devices
2372device uvisor
2373# USB serial support for DDI pocket's PHS
2374device uvscom
2375#
2376# ADMtek USB ethernet. Supports the LinkSys USB100TX,
2377# the Billionton USB100, the Melco LU-ATX, the D-Link DSB-650TX
2378# and the SMC 2202USB. Also works with the ADMtek AN986 Pegasus
2379# eval board.
2380device aue
2381
2382# ASIX Electronics AX88172 USB 2.0 ethernet driver. Used in the
2383# LinkSys USB200M and various other adapters.
2384
2385device axe
2386
2387#
2388# Devices which communicate using Ethernet over USB, particularly
2389# Communication Device Class (CDC) Ethernet specification. Supports
2390# Sharp Zaurus PDAs, some DOCSIS cable modems and so on.
2391device cdce
2392#
2393# CATC USB-EL1201A USB ethernet. Supports the CATC Netmate
2394# and Netmate II, and the Belkin F5U111.
2395device cue
2396#
2397# Kawasaki LSI ethernet. Supports the LinkSys USB10T,
2398# Entrega USB-NET-E45, Peracom Ethernet Adapter, the
2399# 3Com 3c19250, the ADS Technologies USB-10BT, the ATen UC10T,
2400# the Netgear EA101, the D-Link DSB-650, the SMC 2102USB
2401# and 2104USB, and the Corega USB-T.
2402device kue
2403#
2404# RealTek RTL8150 USB to fast ethernet. Supports the Melco LUA-KTX
2405# and the GREEN HOUSE GH-USB100B.
2406device rue
2407#
2408# Davicom DM9601E USB to fast ethernet. Supports the Corega FEther USB-TXC.
2409device udav
2410
2411
2412# debugging options for the USB subsystem
2413#
2414options USB_DEBUG
2415
2416# options for ukbd:
2417options UKBD_DFLT_KEYMAP # specify the built-in keymap
2418makeoptions UKBD_DFLT_KEYMAP=it.iso
2419
2420# options for uplcom:
2421options UPLCOM_INTR_INTERVAL=100 # interrupt pipe interval
2422 # in milliseconds
2423
2424# options for uvscom:
2425options UVSCOM_DEFAULT_OPKTSIZE=8 # default output packet size
2426options UVSCOM_INTR_INTERVAL=100 # interrupt pipe interval
2427 # in milliseconds
2428
2429#####################################################################
2430# FireWire support
2431
2432device firewire # FireWire bus code
2433device sbp # SCSI over Firewire (Requires scbus and da)
2434device sbp_targ # SBP-2 Target mode (Requires scbus and targ)
2435device fwe # Ethernet over FireWire (non-standard!)
2436device fwip # IP over FireWire (rfc2734 and rfc3146)
2437
2438#####################################################################
2439# dcons support (Dumb Console Device)
2440
2441device dcons # dumb console driver
2442device dcons_crom # FireWire attachment
2443options DCONS_BUF_SIZE=16384 # buffer size
2444options DCONS_POLL_HZ=100 # polling rate
2445options DCONS_FORCE_CONSOLE=0 # force to be the primary console
2446options DCONS_FORCE_GDB=1 # force to be the gdb device
2447
2448#####################################################################
2449# crypto subsystem
2450#
2451# This is a port of the openbsd crypto framework. Include this when
2452# configuring FAST_IPSEC and when you have a h/w crypto device to accelerate
2453# user applications that link to openssl.
2454#
2455# Drivers are ports from openbsd with some simple enhancements that have
2456# been fed back to openbsd.
2457
2458device crypto # core crypto support
2459device cryptodev # /dev/crypto for access to h/w
2460
2461device rndtest # FIPS 140-2 entropy tester
2462
2463device hifn # Hifn 7951, 7781, etc.
2464options HIFN_DEBUG # enable debugging support: hw.hifn.debug
2465options HIFN_RNDTEST # enable rndtest support
2466
2467device ubsec # Broadcom 5501, 5601, 58xx
2468options UBSEC_DEBUG # enable debugging support: hw.ubsec.debug
2469options UBSEC_RNDTEST # enable rndtest support
2470
2471#####################################################################
2472
2473
2474#
2475# Embedded system options:
2476#
2477# An embedded system might want to run something other than init.
2478options INIT_PATH=/sbin/init:/stand/sysinstall
2479
2480# Debug options
2481options BUS_DEBUG # enable newbus debugging
2482options DEBUG_VFS_LOCKS # enable vfs lock debugging
2483options SOCKBUF_DEBUG # enable sockbuf last record/mb tail checking
2484
2485#####################################################################
2486# SYSV IPC KERNEL PARAMETERS
2487#
2488# Maximum number of entries in a semaphore map.
2489options SEMMAP=31
2490
2491# Maximum number of System V semaphores that can be used on the system at
2492# one time.
2493options SEMMNI=11
2494
2495# Total number of semaphores system wide
2496options SEMMNS=61
2497
2498# Total number of undo structures in system
2499options SEMMNU=31
2500
2501# Maximum number of System V semaphores that can be used by a single process
2502# at one time.
2503options SEMMSL=61
2504
2505# Maximum number of operations that can be outstanding on a single System V
2506# semaphore at one time.
2507options SEMOPM=101
2508
2509# Maximum number of undo operations that can be outstanding on a single
2510# System V semaphore at one time.
2511options SEMUME=11
2512
2513# Maximum number of shared memory pages system wide.
2514options SHMALL=1025
2515
2516# Maximum size, in bytes, of a single System V shared memory region.
2517options SHMMAX=(SHMMAXPGS*PAGE_SIZE+1)
2518options SHMMAXPGS=1025
2519
2520# Minimum size, in bytes, of a single System V shared memory region.
2521options SHMMIN=2
2522
2523# Maximum number of shared memory regions that can be used on the system
2524# at one time.
2525options SHMMNI=33
2526
2527# Maximum number of System V shared memory regions that can be attached to
2528# a single process at one time.
2529options SHMSEG=9
2530
2531# Set the amount of time (in seconds) the system will wait before
2532# rebooting automatically when a kernel panic occurs. If set to (-1),
2533# the system will wait indefinitely until a key is pressed on the
2534# console.
2535options PANIC_REBOOT_WAIT_TIME=16
2536
2537# Attempt to bypass the buffer cache and put data directly into the
2538# userland buffer for read operation when O_DIRECT flag is set on the
2539# file. Both offset and length of the read operation must be
2540# multiples of the physical media sector size.
2541#
2542options DIRECTIO
2543
2544# Specify a lower limit for the number of swap I/O buffers. They are
2545# (among other things) used when bypassing the buffer cache due to
2546# DIRECTIO kernel option enabled and O_DIRECT flag set on file.
2547#
2548options NSWBUF_MIN=120
2549
2550#####################################################################
2551
2552# More undocumented options for linting.
2553# Note that documenting these are not considered an affront.
2554
2555options CAM_DEBUG_DELAY
2556
2557# VFS cluster debugging.
2558options CLUSTERDEBUG
2559
2560options DEBUG
2561
2562# Kernel filelock debugging.
2563options LOCKF_DEBUG
2564
2565# System V compatible message queues
2566# Please note that the values provided here are used to test kernel
2567# building. The defaults in the sources provide almost the same numbers.
2568# MSGSSZ must be a power of 2 between 8 and 1024.
2569options MSGMNB=2049 # Max number of chars in queue
2570options MSGMNI=41 # Max number of message queue identifiers
2571options MSGSEG=2049 # Max number of message segments
2572options MSGSSZ=16 # Size of a message segment
2573options MSGTQL=41 # Max number of messages in system
2574
2575options NBUF=512 # Number of buffer headers
2576
2577options NMBCLUSTERS=1024 # Number of mbuf clusters
2578
2579options SCSI_NCR_DEBUG
2580options SCSI_NCR_MAX_SYNC=10000
2581options SCSI_NCR_MAX_WIDE=1
2582options SCSI_NCR_MYADDR=7
2583
2584options SC_DEBUG_LEVEL=5 # Syscons debug level
2585options SC_RENDER_DEBUG # syscons rendering debugging
2586
2587options SHOW_BUSYBUFS # List buffers that prevent root unmount
2588options SLIP_IFF_OPTS
2589options VFS_BIO_DEBUG # VFS buffer I/O debugging
2590
2591options KSTACK_MAX_PAGES=32 # Maximum pages to give the kernel stack
2592
2593# Adaptec Array Controller driver options
2594options AAC_DEBUG # Debugging levels:
2595 # 0 - quiet, only emit warnings
2596 # 1 - noisy, emit major function
2597 # points and things done
2598 # 2 - extremely noisy, emit trace
2599 # items in loops, etc.
2600
2601# Yet more undocumented options for linting.
2602# BKTR_ALLOC_PAGES has no effect except to cause warnings, and
2603# BROOKTREE_ALLOC_PAGES hasn't actually been superseded by it, since the
2604# driver still mostly spells this option BROOKTREE_ALLOC_PAGES.
2605##options BKTR_ALLOC_PAGES=(217*4+1)
2606options BROOKTREE_ALLOC_PAGES=(217*4+1)
2607options MAXFILES=999
2608options NDEVFSINO=1025
2609options NDEVFSOVERFLOW=32769
2610
2611# Yet more undocumented options for linting.
2612options VGA_DEBUG
|