1/*
2 * CDDL HEADER START
3 *
4 * The contents of this file are subject to the terms of the
5 * Common Development and Distribution License (the "License").
6 * You may not use this file except in compliance with the License.
7 *
8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9 * or http://www.opensolaris.org/os/licensing.
10 * See the License for the specific language governing permissions
11 * and limitations under the License.
12 *
13 * When distributing Covered Code, include this CDDL HEADER in each
14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15 * If applicable, add the following below this CDDL HEADER, with the
16 * fields enclosed by brackets "[]" replaced with your own identifying
17 * information: Portions Copyright [yyyy] [name of copyright owner]
18 *
19 * CDDL HEADER END
20 */
21/*
22 * Copyright 2009 Sun Microsystems, Inc. All rights reserved.
23 * Use is subject to license terms.
24 */
25
26#include <sys/spa.h>
27#include <sys/spa_impl.h>
28#include <sys/vdev.h>
29#include <sys/vdev_impl.h>
30#include <sys/zio.h>
31
32#include <sys/fm/fs/zfs.h>
33#include <sys/fm/protocol.h>
34#include <sys/fm/util.h>
35
36#ifdef _KERNEL
37/* Including sys/bus.h is just too hard, so I declare what I need here. */
38extern void devctl_notify(const char *__system, const char *__subsystem,
39 const char *__type, const char *__data);
40#endif
41
42/*
43 * This general routine is responsible for generating all the different ZFS
44 * ereports. The payload is dependent on the class, and which arguments are
45 * supplied to the function:
46 *
47 * EREPORT POOL VDEV IO
48 * block X X X
49 * data X X
50 * device X X
51 * pool X
52 *
53 * If we are in a loading state, all errors are chained together by the same
54 * SPA-wide ENA (Error Numeric Association).
55 *
56 * For isolated I/O requests, we get the ENA from the zio_t. The propagation
57 * gets very complicated due to RAID-Z, gang blocks, and vdev caching. We want
58 * to chain together all ereports associated with a logical piece of data. For
59 * read I/Os, there are basically three 'types' of I/O, which form a roughly
60 * layered diagram:
61 *
62 * +---------------+
63 * | Aggregate I/O | No associated logical data or device
64 * +---------------+
65 * |
66 * V
67 * +---------------+ Reads associated with a piece of logical data.
68 * | Read I/O | This includes reads on behalf of RAID-Z,
69 * +---------------+ mirrors, gang blocks, retries, etc.
70 * |
71 * V
72 * +---------------+ Reads associated with a particular device, but
73 * | Physical I/O | no logical data. Issued as part of vdev caching
74 * +---------------+ and I/O aggregation.
75 *
76 * Note that 'physical I/O' here is not the same terminology as used in the rest
77 * of ZIO. Typically, 'physical I/O' simply means that there is no attached
78 * blockpointer. But I/O with no associated block pointer can still be related
79 * to a logical piece of data (i.e. RAID-Z requests).
80 *
81 * Purely physical I/O always have unique ENAs. They are not related to a
82 * particular piece of logical data, and therefore cannot be chained together.
83 * We still generate an ereport, but the DE doesn't correlate it with any
84 * logical piece of data. When such an I/O fails, the delegated I/O requests
85 * will issue a retry, which will trigger the 'real' ereport with the correct
86 * ENA.
87 *
88 * We keep track of the ENA for a ZIO chain through the 'io_logical' member.
89 * When a new logical I/O is issued, we set this to point to itself. Child I/Os
90 * then inherit this pointer, so that when it is first set subsequent failures
91 * will use the same ENA. For vdev cache fill and queue aggregation I/O,
92 * this pointer is set to NULL, and no ereport will be generated (since it
93 * doesn't actually correspond to any particular device or piece of data,
94 * and the caller will always retry without caching or queueing anyway).
95 */
96void
97zfs_ereport_post(const char *subclass, spa_t *spa, vdev_t *vd, zio_t *zio,
98 uint64_t stateoroffset, uint64_t size)
99{
100#ifdef _KERNEL
101 char buf[1024];
102 struct sbuf sb;
103 struct timespec ts;
104
105 /*
106 * If we are doing a spa_tryimport(), ignore errors.
107 */
108 if (spa->spa_load_state == SPA_LOAD_TRYIMPORT)
109 return;
110
111 /*
112 * If we are in the middle of opening a pool, and the previous attempt
113 * failed, don't bother logging any new ereports - we're just going to
114 * get the same diagnosis anyway.
115 */
116 if (spa->spa_load_state != SPA_LOAD_NONE &&
117 spa->spa_last_open_failed)
118 return;
119
120 if (zio != NULL) {
121 /*
122 * If this is not a read or write zio, ignore the error. This
123 * can occur if the DKIOCFLUSHWRITECACHE ioctl fails.
124 */
125 if (zio->io_type != ZIO_TYPE_READ &&
126 zio->io_type != ZIO_TYPE_WRITE)
127 return;
128
129 /*
130 * Ignore any errors from speculative I/Os, as failure is an
131 * expected result.
132 */
133 if (zio->io_flags & ZIO_FLAG_SPECULATIVE)
134 return;
135
136 if (vd != NULL) {
137 /*
138 * If the vdev has already been marked as failing due
139 * to a failed probe, then ignore any subsequent I/O
140 * errors, as the DE will automatically fault the vdev
141 * on the first such failure. This also catches cases
142 * where vdev_remove_wanted is set and the device has
143 * not yet been asynchronously placed into the REMOVED
144 * state.
145 */
146 if (zio->io_vd == vd &&
147 !vdev_accessible(vd, zio) &&
148 strcmp(subclass, FM_EREPORT_ZFS_PROBE_FAILURE) != 0)
149 return;
150
151 /*
152 * Ignore checksum errors for reads from DTL regions of
153 * leaf vdevs.
154 */
155 if (zio->io_type == ZIO_TYPE_READ &&
156 zio->io_error == ECKSUM &&
157 vd->vdev_ops->vdev_op_leaf &&
158 vdev_dtl_contains(vd, DTL_MISSING, zio->io_txg, 1))
159 return;
160 }
161 }
162 nanotime(&ts);
163
164 sbuf_new(&sb, buf, sizeof(buf), SBUF_FIXEDLEN);
165 sbuf_printf(&sb, "time=%ju.%ld", (uintmax_t)ts.tv_sec, ts.tv_nsec);
166
167 /*
168 * Serialize ereport generation
169 */
170 mutex_enter(&spa->spa_errlist_lock);
171
172#if 0
173 /*
174 * Determine the ENA to use for this event. If we are in a loading
175 * state, use a SPA-wide ENA. Otherwise, if we are in an I/O state, use
176 * a root zio-wide ENA. Otherwise, simply use a unique ENA.
177 */
178 if (spa->spa_load_state != SPA_LOAD_NONE) {
179#if 0
180 if (spa->spa_ena == 0)
181 spa->spa_ena = fm_ena_generate(0, FM_ENA_FMT1);
182#endif
183 ena = spa->spa_ena;
184 } else if (zio != NULL && zio->io_logical != NULL) {
185#if 0
186 if (zio->io_logical->io_ena == 0)
187 zio->io_logical->io_ena =
188 fm_ena_generate(0, FM_ENA_FMT1);
189#endif
190 ena = zio->io_logical->io_ena;
191 } else {
192#if 0
193 ena = fm_ena_generate(0, FM_ENA_FMT1);
194#else
195 ena = 0;
196#endif
197 }
198#endif
199
200 /*
201 * Construct the full class, detector, and other standard FMA fields.
202 */
203 sbuf_printf(&sb, " ereport_version=%u", FM_EREPORT_VERSION);
204 sbuf_printf(&sb, " class=%s.%s", ZFS_ERROR_CLASS, subclass);
205
206 sbuf_printf(&sb, " zfs_scheme_version=%u", FM_ZFS_SCHEME_VERSION);
207
208 /*
209 * Construct the per-ereport payload, depending on which parameters are
210 * passed in.
211 */
212
213 /*
214 * Generic payload members common to all ereports.
215 */
216 sbuf_printf(&sb, " %s=%s", FM_EREPORT_PAYLOAD_ZFS_POOL, spa_name(spa));
217 sbuf_printf(&sb, " %s=%ju", FM_EREPORT_PAYLOAD_ZFS_POOL_GUID,
218 spa_guid(spa));
219 sbuf_printf(&sb, " %s=%d", FM_EREPORT_PAYLOAD_ZFS_POOL_CONTEXT,
220 spa->spa_load_state);
221
222 if (spa != NULL) {
223 sbuf_printf(&sb, " %s=%s", FM_EREPORT_PAYLOAD_ZFS_POOL_FAILMODE,
224 spa_get_failmode(spa) == ZIO_FAILURE_MODE_WAIT ?
225 FM_EREPORT_FAILMODE_WAIT :
226 spa_get_failmode(spa) == ZIO_FAILURE_MODE_CONTINUE ?
227 FM_EREPORT_FAILMODE_CONTINUE : FM_EREPORT_FAILMODE_PANIC);
228 }
229
230 if (vd != NULL) {
231 vdev_t *pvd = vd->vdev_parent;
232
233 sbuf_printf(&sb, " %s=%ju", FM_EREPORT_PAYLOAD_ZFS_VDEV_GUID,
234 vd->vdev_guid);
235 sbuf_printf(&sb, " %s=%s", FM_EREPORT_PAYLOAD_ZFS_VDEV_TYPE,
236 vd->vdev_ops->vdev_op_type);
237 if (vd->vdev_path != NULL)
238 sbuf_printf(&sb, " %s=%s",
239 FM_EREPORT_PAYLOAD_ZFS_VDEV_PATH, vd->vdev_path);
240 if (vd->vdev_devid != NULL)
241 sbuf_printf(&sb, " %s=%s",
242 FM_EREPORT_PAYLOAD_ZFS_VDEV_DEVID, vd->vdev_devid);
243 if (vd->vdev_fru != NULL)
244 sbuf_printf(&sb, " %s=%s",
245 FM_EREPORT_PAYLOAD_ZFS_VDEV_FRU, vd->vdev_fru);
246
247 if (pvd != NULL) {
248 sbuf_printf(&sb, " %s=%ju",
249 FM_EREPORT_PAYLOAD_ZFS_PARENT_GUID, pvd->vdev_guid);
250 sbuf_printf(&sb, " %s=%s",
251 FM_EREPORT_PAYLOAD_ZFS_PARENT_TYPE,
252 pvd->vdev_ops->vdev_op_type);
253 if (pvd->vdev_path)
254 sbuf_printf(&sb, " %s=%s",
255 FM_EREPORT_PAYLOAD_ZFS_PARENT_PATH,
256 pvd->vdev_path);
257 if (pvd->vdev_devid)
258 sbuf_printf(&sb, " %s=%s",
259 FM_EREPORT_PAYLOAD_ZFS_PARENT_DEVID,
260 pvd->vdev_devid);
261 }
262 }
263
264 if (zio != NULL) {
265 /*
266 * Payload common to all I/Os.
267 */
268 sbuf_printf(&sb, " %s=%u", FM_EREPORT_PAYLOAD_ZFS_ZIO_ERR,
269 zio->io_error);
270
271 /*
272 * If the 'size' parameter is non-zero, it indicates this is a
273 * RAID-Z or other I/O where the physical offset and length are
274 * provided for us, instead of within the zio_t.
275 */
276 if (vd != NULL) {
277 if (size) {
278 sbuf_printf(&sb, " %s=%ju",
279 FM_EREPORT_PAYLOAD_ZFS_ZIO_OFFSET,
280 stateoroffset);
281 sbuf_printf(&sb, " %s=%ju",
282 FM_EREPORT_PAYLOAD_ZFS_ZIO_SIZE, size);
283 } else {
284 sbuf_printf(&sb, " %s=%ju",
285 FM_EREPORT_PAYLOAD_ZFS_ZIO_OFFSET,
286 zio->io_offset);
287 sbuf_printf(&sb, " %s=%ju",
288 FM_EREPORT_PAYLOAD_ZFS_ZIO_SIZE,
289 zio->io_size);
290 }
291 }
292
293 /*
294 * Payload for I/Os with corresponding logical information.
295 */
296 if (zio->io_logical != NULL) {
297 sbuf_printf(&sb, " %s=%ju",
298 FM_EREPORT_PAYLOAD_ZFS_ZIO_OBJECT,
299 zio->io_logical->io_bookmark.zb_object);
300 sbuf_printf(&sb, " %s=%ju",
301 FM_EREPORT_PAYLOAD_ZFS_ZIO_LEVEL,
302 zio->io_logical->io_bookmark.zb_level);
303 sbuf_printf(&sb, " %s=%ju",
304 FM_EREPORT_PAYLOAD_ZFS_ZIO_BLKID,
305 zio->io_logical->io_bookmark.zb_blkid);
306 }
307 } else if (vd != NULL) {
308 /*
309 * If we have a vdev but no zio, this is a device fault, and the
310 * 'stateoroffset' parameter indicates the previous state of the
311 * vdev.
312 */
313 sbuf_printf(&sb, " %s=%ju", FM_EREPORT_PAYLOAD_ZFS_PREV_STATE,
314 stateoroffset);
315 }
316 mutex_exit(&spa->spa_errlist_lock);
317
318 sbuf_finish(&sb);
319 devctl_notify("ZFS", spa->spa_name, subclass, sbuf_data(&sb));
320 if (sbuf_overflowed(&sb))
321 printf("ZFS WARNING: sbuf overflowed\n");
322 sbuf_delete(&sb);
323#endif
324}
325
326static void
327zfs_post_common(spa_t *spa, vdev_t *vd, const char *name)
328{
329#ifdef _KERNEL
330 char buf[1024];
331 char class[64];
332 struct sbuf sb;
333 struct timespec ts;
334
335 nanotime(&ts);
336
337 sbuf_new(&sb, buf, sizeof(buf), SBUF_FIXEDLEN);
338 sbuf_printf(&sb, "time=%ju.%ld", (uintmax_t)ts.tv_sec, ts.tv_nsec);
339
340 snprintf(class, sizeof(class), "%s.%s.%s", FM_RSRC_RESOURCE,
341 ZFS_ERROR_CLASS, name);
342 sbuf_printf(&sb, " %s=%hhu", FM_VERSION, FM_RSRC_VERSION);
343 sbuf_printf(&sb, " %s=%s", FM_CLASS, class);
344 sbuf_printf(&sb, " %s=%ju", FM_EREPORT_PAYLOAD_ZFS_POOL_GUID,
345 spa_guid(spa));
346 if (vd)
347 sbuf_printf(&sb, " %s=%ju", FM_EREPORT_PAYLOAD_ZFS_VDEV_GUID,
348 vd->vdev_guid);
349 sbuf_finish(&sb);
350 ZFS_LOG(1, "%s", sbuf_data(&sb));
351 devctl_notify("ZFS", spa->spa_name, class, sbuf_data(&sb));
352 if (sbuf_overflowed(&sb))
353 printf("ZFS WARNING: sbuf overflowed\n");
354 sbuf_delete(&sb);
355#endif
356}
357
358/*
359 * The 'resource.fs.zfs.removed' event is an internal signal that the given vdev
360 * has been removed from the system. This will cause the DE to ignore any
361 * recent I/O errors, inferring that they are due to the asynchronous device
362 * removal.
363 */
364void
365zfs_post_remove(spa_t *spa, vdev_t *vd)
366{
367 zfs_post_common(spa, vd, FM_RESOURCE_REMOVED);
368}
369
370/*
371 * The 'resource.fs.zfs.autoreplace' event is an internal signal that the pool
372 * has the 'autoreplace' property set, and therefore any broken vdevs will be
373 * handled by higher level logic, and no vdev fault should be generated.
374 */
375void
376zfs_post_autoreplace(spa_t *spa, vdev_t *vd)
377{
378 zfs_post_common(spa, vd, FM_RESOURCE_AUTOREPLACE);
379}
2 * CDDL HEADER START
3 *
4 * The contents of this file are subject to the terms of the
5 * Common Development and Distribution License (the "License").
6 * You may not use this file except in compliance with the License.
7 *
8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9 * or http://www.opensolaris.org/os/licensing.
10 * See the License for the specific language governing permissions
11 * and limitations under the License.
12 *
13 * When distributing Covered Code, include this CDDL HEADER in each
14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15 * If applicable, add the following below this CDDL HEADER, with the
16 * fields enclosed by brackets "[]" replaced with your own identifying
17 * information: Portions Copyright [yyyy] [name of copyright owner]
18 *
19 * CDDL HEADER END
20 */
21/*
22 * Copyright 2009 Sun Microsystems, Inc. All rights reserved.
23 * Use is subject to license terms.
24 */
25
26#include <sys/spa.h>
27#include <sys/spa_impl.h>
28#include <sys/vdev.h>
29#include <sys/vdev_impl.h>
30#include <sys/zio.h>
31
32#include <sys/fm/fs/zfs.h>
33#include <sys/fm/protocol.h>
34#include <sys/fm/util.h>
35
36#ifdef _KERNEL
37/* Including sys/bus.h is just too hard, so I declare what I need here. */
38extern void devctl_notify(const char *__system, const char *__subsystem,
39 const char *__type, const char *__data);
40#endif
41
42/*
43 * This general routine is responsible for generating all the different ZFS
44 * ereports. The payload is dependent on the class, and which arguments are
45 * supplied to the function:
46 *
47 * EREPORT POOL VDEV IO
48 * block X X X
49 * data X X
50 * device X X
51 * pool X
52 *
53 * If we are in a loading state, all errors are chained together by the same
54 * SPA-wide ENA (Error Numeric Association).
55 *
56 * For isolated I/O requests, we get the ENA from the zio_t. The propagation
57 * gets very complicated due to RAID-Z, gang blocks, and vdev caching. We want
58 * to chain together all ereports associated with a logical piece of data. For
59 * read I/Os, there are basically three 'types' of I/O, which form a roughly
60 * layered diagram:
61 *
62 * +---------------+
63 * | Aggregate I/O | No associated logical data or device
64 * +---------------+
65 * |
66 * V
67 * +---------------+ Reads associated with a piece of logical data.
68 * | Read I/O | This includes reads on behalf of RAID-Z,
69 * +---------------+ mirrors, gang blocks, retries, etc.
70 * |
71 * V
72 * +---------------+ Reads associated with a particular device, but
73 * | Physical I/O | no logical data. Issued as part of vdev caching
74 * +---------------+ and I/O aggregation.
75 *
76 * Note that 'physical I/O' here is not the same terminology as used in the rest
77 * of ZIO. Typically, 'physical I/O' simply means that there is no attached
78 * blockpointer. But I/O with no associated block pointer can still be related
79 * to a logical piece of data (i.e. RAID-Z requests).
80 *
81 * Purely physical I/O always have unique ENAs. They are not related to a
82 * particular piece of logical data, and therefore cannot be chained together.
83 * We still generate an ereport, but the DE doesn't correlate it with any
84 * logical piece of data. When such an I/O fails, the delegated I/O requests
85 * will issue a retry, which will trigger the 'real' ereport with the correct
86 * ENA.
87 *
88 * We keep track of the ENA for a ZIO chain through the 'io_logical' member.
89 * When a new logical I/O is issued, we set this to point to itself. Child I/Os
90 * then inherit this pointer, so that when it is first set subsequent failures
91 * will use the same ENA. For vdev cache fill and queue aggregation I/O,
92 * this pointer is set to NULL, and no ereport will be generated (since it
93 * doesn't actually correspond to any particular device or piece of data,
94 * and the caller will always retry without caching or queueing anyway).
95 */
96void
97zfs_ereport_post(const char *subclass, spa_t *spa, vdev_t *vd, zio_t *zio,
98 uint64_t stateoroffset, uint64_t size)
99{
100#ifdef _KERNEL
101 char buf[1024];
102 struct sbuf sb;
103 struct timespec ts;
104
105 /*
106 * If we are doing a spa_tryimport(), ignore errors.
107 */
108 if (spa->spa_load_state == SPA_LOAD_TRYIMPORT)
109 return;
110
111 /*
112 * If we are in the middle of opening a pool, and the previous attempt
113 * failed, don't bother logging any new ereports - we're just going to
114 * get the same diagnosis anyway.
115 */
116 if (spa->spa_load_state != SPA_LOAD_NONE &&
117 spa->spa_last_open_failed)
118 return;
119
120 if (zio != NULL) {
121 /*
122 * If this is not a read or write zio, ignore the error. This
123 * can occur if the DKIOCFLUSHWRITECACHE ioctl fails.
124 */
125 if (zio->io_type != ZIO_TYPE_READ &&
126 zio->io_type != ZIO_TYPE_WRITE)
127 return;
128
129 /*
130 * Ignore any errors from speculative I/Os, as failure is an
131 * expected result.
132 */
133 if (zio->io_flags & ZIO_FLAG_SPECULATIVE)
134 return;
135
136 if (vd != NULL) {
137 /*
138 * If the vdev has already been marked as failing due
139 * to a failed probe, then ignore any subsequent I/O
140 * errors, as the DE will automatically fault the vdev
141 * on the first such failure. This also catches cases
142 * where vdev_remove_wanted is set and the device has
143 * not yet been asynchronously placed into the REMOVED
144 * state.
145 */
146 if (zio->io_vd == vd &&
147 !vdev_accessible(vd, zio) &&
148 strcmp(subclass, FM_EREPORT_ZFS_PROBE_FAILURE) != 0)
149 return;
150
151 /*
152 * Ignore checksum errors for reads from DTL regions of
153 * leaf vdevs.
154 */
155 if (zio->io_type == ZIO_TYPE_READ &&
156 zio->io_error == ECKSUM &&
157 vd->vdev_ops->vdev_op_leaf &&
158 vdev_dtl_contains(vd, DTL_MISSING, zio->io_txg, 1))
159 return;
160 }
161 }
162 nanotime(&ts);
163
164 sbuf_new(&sb, buf, sizeof(buf), SBUF_FIXEDLEN);
165 sbuf_printf(&sb, "time=%ju.%ld", (uintmax_t)ts.tv_sec, ts.tv_nsec);
166
167 /*
168 * Serialize ereport generation
169 */
170 mutex_enter(&spa->spa_errlist_lock);
171
172#if 0
173 /*
174 * Determine the ENA to use for this event. If we are in a loading
175 * state, use a SPA-wide ENA. Otherwise, if we are in an I/O state, use
176 * a root zio-wide ENA. Otherwise, simply use a unique ENA.
177 */
178 if (spa->spa_load_state != SPA_LOAD_NONE) {
179#if 0
180 if (spa->spa_ena == 0)
181 spa->spa_ena = fm_ena_generate(0, FM_ENA_FMT1);
182#endif
183 ena = spa->spa_ena;
184 } else if (zio != NULL && zio->io_logical != NULL) {
185#if 0
186 if (zio->io_logical->io_ena == 0)
187 zio->io_logical->io_ena =
188 fm_ena_generate(0, FM_ENA_FMT1);
189#endif
190 ena = zio->io_logical->io_ena;
191 } else {
192#if 0
193 ena = fm_ena_generate(0, FM_ENA_FMT1);
194#else
195 ena = 0;
196#endif
197 }
198#endif
199
200 /*
201 * Construct the full class, detector, and other standard FMA fields.
202 */
203 sbuf_printf(&sb, " ereport_version=%u", FM_EREPORT_VERSION);
204 sbuf_printf(&sb, " class=%s.%s", ZFS_ERROR_CLASS, subclass);
205
206 sbuf_printf(&sb, " zfs_scheme_version=%u", FM_ZFS_SCHEME_VERSION);
207
208 /*
209 * Construct the per-ereport payload, depending on which parameters are
210 * passed in.
211 */
212
213 /*
214 * Generic payload members common to all ereports.
215 */
216 sbuf_printf(&sb, " %s=%s", FM_EREPORT_PAYLOAD_ZFS_POOL, spa_name(spa));
217 sbuf_printf(&sb, " %s=%ju", FM_EREPORT_PAYLOAD_ZFS_POOL_GUID,
218 spa_guid(spa));
219 sbuf_printf(&sb, " %s=%d", FM_EREPORT_PAYLOAD_ZFS_POOL_CONTEXT,
220 spa->spa_load_state);
221
222 if (spa != NULL) {
223 sbuf_printf(&sb, " %s=%s", FM_EREPORT_PAYLOAD_ZFS_POOL_FAILMODE,
224 spa_get_failmode(spa) == ZIO_FAILURE_MODE_WAIT ?
225 FM_EREPORT_FAILMODE_WAIT :
226 spa_get_failmode(spa) == ZIO_FAILURE_MODE_CONTINUE ?
227 FM_EREPORT_FAILMODE_CONTINUE : FM_EREPORT_FAILMODE_PANIC);
228 }
229
230 if (vd != NULL) {
231 vdev_t *pvd = vd->vdev_parent;
232
233 sbuf_printf(&sb, " %s=%ju", FM_EREPORT_PAYLOAD_ZFS_VDEV_GUID,
234 vd->vdev_guid);
235 sbuf_printf(&sb, " %s=%s", FM_EREPORT_PAYLOAD_ZFS_VDEV_TYPE,
236 vd->vdev_ops->vdev_op_type);
237 if (vd->vdev_path != NULL)
238 sbuf_printf(&sb, " %s=%s",
239 FM_EREPORT_PAYLOAD_ZFS_VDEV_PATH, vd->vdev_path);
240 if (vd->vdev_devid != NULL)
241 sbuf_printf(&sb, " %s=%s",
242 FM_EREPORT_PAYLOAD_ZFS_VDEV_DEVID, vd->vdev_devid);
243 if (vd->vdev_fru != NULL)
244 sbuf_printf(&sb, " %s=%s",
245 FM_EREPORT_PAYLOAD_ZFS_VDEV_FRU, vd->vdev_fru);
246
247 if (pvd != NULL) {
248 sbuf_printf(&sb, " %s=%ju",
249 FM_EREPORT_PAYLOAD_ZFS_PARENT_GUID, pvd->vdev_guid);
250 sbuf_printf(&sb, " %s=%s",
251 FM_EREPORT_PAYLOAD_ZFS_PARENT_TYPE,
252 pvd->vdev_ops->vdev_op_type);
253 if (pvd->vdev_path)
254 sbuf_printf(&sb, " %s=%s",
255 FM_EREPORT_PAYLOAD_ZFS_PARENT_PATH,
256 pvd->vdev_path);
257 if (pvd->vdev_devid)
258 sbuf_printf(&sb, " %s=%s",
259 FM_EREPORT_PAYLOAD_ZFS_PARENT_DEVID,
260 pvd->vdev_devid);
261 }
262 }
263
264 if (zio != NULL) {
265 /*
266 * Payload common to all I/Os.
267 */
268 sbuf_printf(&sb, " %s=%u", FM_EREPORT_PAYLOAD_ZFS_ZIO_ERR,
269 zio->io_error);
270
271 /*
272 * If the 'size' parameter is non-zero, it indicates this is a
273 * RAID-Z or other I/O where the physical offset and length are
274 * provided for us, instead of within the zio_t.
275 */
276 if (vd != NULL) {
277 if (size) {
278 sbuf_printf(&sb, " %s=%ju",
279 FM_EREPORT_PAYLOAD_ZFS_ZIO_OFFSET,
280 stateoroffset);
281 sbuf_printf(&sb, " %s=%ju",
282 FM_EREPORT_PAYLOAD_ZFS_ZIO_SIZE, size);
283 } else {
284 sbuf_printf(&sb, " %s=%ju",
285 FM_EREPORT_PAYLOAD_ZFS_ZIO_OFFSET,
286 zio->io_offset);
287 sbuf_printf(&sb, " %s=%ju",
288 FM_EREPORT_PAYLOAD_ZFS_ZIO_SIZE,
289 zio->io_size);
290 }
291 }
292
293 /*
294 * Payload for I/Os with corresponding logical information.
295 */
296 if (zio->io_logical != NULL) {
297 sbuf_printf(&sb, " %s=%ju",
298 FM_EREPORT_PAYLOAD_ZFS_ZIO_OBJECT,
299 zio->io_logical->io_bookmark.zb_object);
300 sbuf_printf(&sb, " %s=%ju",
301 FM_EREPORT_PAYLOAD_ZFS_ZIO_LEVEL,
302 zio->io_logical->io_bookmark.zb_level);
303 sbuf_printf(&sb, " %s=%ju",
304 FM_EREPORT_PAYLOAD_ZFS_ZIO_BLKID,
305 zio->io_logical->io_bookmark.zb_blkid);
306 }
307 } else if (vd != NULL) {
308 /*
309 * If we have a vdev but no zio, this is a device fault, and the
310 * 'stateoroffset' parameter indicates the previous state of the
311 * vdev.
312 */
313 sbuf_printf(&sb, " %s=%ju", FM_EREPORT_PAYLOAD_ZFS_PREV_STATE,
314 stateoroffset);
315 }
316 mutex_exit(&spa->spa_errlist_lock);
317
318 sbuf_finish(&sb);
319 devctl_notify("ZFS", spa->spa_name, subclass, sbuf_data(&sb));
320 if (sbuf_overflowed(&sb))
321 printf("ZFS WARNING: sbuf overflowed\n");
322 sbuf_delete(&sb);
323#endif
324}
325
326static void
327zfs_post_common(spa_t *spa, vdev_t *vd, const char *name)
328{
329#ifdef _KERNEL
330 char buf[1024];
331 char class[64];
332 struct sbuf sb;
333 struct timespec ts;
334
335 nanotime(&ts);
336
337 sbuf_new(&sb, buf, sizeof(buf), SBUF_FIXEDLEN);
338 sbuf_printf(&sb, "time=%ju.%ld", (uintmax_t)ts.tv_sec, ts.tv_nsec);
339
340 snprintf(class, sizeof(class), "%s.%s.%s", FM_RSRC_RESOURCE,
341 ZFS_ERROR_CLASS, name);
342 sbuf_printf(&sb, " %s=%hhu", FM_VERSION, FM_RSRC_VERSION);
343 sbuf_printf(&sb, " %s=%s", FM_CLASS, class);
344 sbuf_printf(&sb, " %s=%ju", FM_EREPORT_PAYLOAD_ZFS_POOL_GUID,
345 spa_guid(spa));
346 if (vd)
347 sbuf_printf(&sb, " %s=%ju", FM_EREPORT_PAYLOAD_ZFS_VDEV_GUID,
348 vd->vdev_guid);
349 sbuf_finish(&sb);
350 ZFS_LOG(1, "%s", sbuf_data(&sb));
351 devctl_notify("ZFS", spa->spa_name, class, sbuf_data(&sb));
352 if (sbuf_overflowed(&sb))
353 printf("ZFS WARNING: sbuf overflowed\n");
354 sbuf_delete(&sb);
355#endif
356}
357
358/*
359 * The 'resource.fs.zfs.removed' event is an internal signal that the given vdev
360 * has been removed from the system. This will cause the DE to ignore any
361 * recent I/O errors, inferring that they are due to the asynchronous device
362 * removal.
363 */
364void
365zfs_post_remove(spa_t *spa, vdev_t *vd)
366{
367 zfs_post_common(spa, vd, FM_RESOURCE_REMOVED);
368}
369
370/*
371 * The 'resource.fs.zfs.autoreplace' event is an internal signal that the pool
372 * has the 'autoreplace' property set, and therefore any broken vdevs will be
373 * handled by higher level logic, and no vdev fault should be generated.
374 */
375void
376zfs_post_autoreplace(spa_t *spa, vdev_t *vd)
377{
378 zfs_post_common(spa, vd, FM_RESOURCE_AUTOREPLACE);
379}