1.\" -*- nroff -*-
2.\"
3.\" Copyright (c) 1996 A.R.Gordon, andrew.gordon@net-tel.co.uk
4.\" All rights reserved.
5.\"
6.\" Redistribution and use in source and binary forms, with or without
7.\" modification, are permitted provided that the following conditions
8.\" are met:
9.\" 1. Redistributions of source code must retain the above copyright
10.\" notice, this list of conditions and the following disclaimer.
11.\" 2. Redistributions in binary form must reproduce the above copyright
12.\" notice, this list of conditions and the following disclaimer in the
13.\" documentation and/or other materials provided with the distribution.
14.\" 3. All advertising materials mentioning features or use of this software
15.\" must display the following acknowledgement:
16.\" This product includes software developed by the University of
17.\" California, Berkeley and its contributors.
18.\" 4. Neither the name of the University nor the names of its contributors
19.\" may be used to endorse or promote products derived from this software
20.\" without specific prior written permission.
21.\"
22.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
23.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
24.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
26.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
27.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
28.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
29.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
30.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
31.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
32.\" SUCH DAMAGE.
33.\"
34.\" Id: man4.i386/lp.4,v 1.9 1999/02/14 12:06:16 nsouch Exp
35.\" $FreeBSD: head/share/man/man4/lp.4 68962 2000-11-20 18:41:33Z ru $
36.\"
37.Dd March 4, 1996
38.Os
39.Dt LP 4
40.Sh NAME
41.Nm lp
42.Nd printer port Internet Protocol driver
43.Sh SYNOPSIS
44.Nm ifconfig
45.Ar lp0
46.Ar myaddress hisaddress
47.Op Fl link0
48.Pp
49.Cd "device ppbus"
50.Cd "device plip"
51.Cd "device ppc0 at isa? port? irq 7"
52.Sh DESCRIPTION
53The
54.Nm
55driver allows a PC parallel printer port to be used as a
56point-to-point network interface between two similarly configured systems.
57Data is transferred 4 bits at a time, using the printer status lines for
58input: hence there is no requirement for special bidirectional hardware
59and any standard AT-compatible printer port with working interrupts may be used.
60.Pp
61During the boot process, for each
62.Nm plip
63device which is probed and has an interrupt assigned, a corresponding
64.Nm network
65device is created.
66.Pp
67Configuring an
68.Nm
69device with
70.Xr ifconfig 8
71causes the corresponding
72.Nm parallel port bus
73to be reserved for PLIP until the network interface is configured 'down'.
74.Pp
75The communication protocol is selected by the
76.Cm link0
77flag:
78.Bl -tag -width Fl
79.It Fl link0
80(default) Use
81.Fx
82mode (LPIP). This is the simpler of the two modes
83and therefore slightly more efficient.
84.It Cm link0
85Use Crynwr/Linux compatible mode (CLPIP). This mode has a simulated ethernet
86packet header, and is easier to interface to other types of equipment.
87.El
88.Pp
89The interface MTU defaults to 1500, but may be set to any value. Both ends
90of the link must be configured with the same MTU.
91.Ss Cable Connections
92The cable connecting the two parallel ports should be wired as follows:
93.Bd -literal
94 Pin Pin Description
95 2 15 Data0 -> ERROR*
96 3 13 Data1 -> SLCT
97 4 12 Data2 -> PE
98 5 10 Data3 -> ACK*
99 6 11 Data4 -> BUSY
100 15 2 ERROR* -> Data0
101 13 3 SLCT -> Data1
102 12 4 PE -> Data2
103 10 5 ACK* -> Data3
104 11 6 BUSY -> Data4
105 18-25 18-25 Ground
106.Ed
107.Pp
108Cables with this wiring are widely available as 'Laplink' cables, and
109are often coloured yellow.
110.Pp
111The connections are symmetric, and provide 5 lines in each direction (four
112data plus one handshake). The two modes use the same wiring, but make a
113different choice of which line to use as handshake.
114.Ss FreeBSD LPIP mode
115The signal lines are used as follows:
116.Bl -tag -width dataxxxx(Pinxx)
117.It Em Data0 (Pin 2)
118Data out, bit 0.
119.It Em Data1 (Pin 3)
120Data out, bit 1.
121.It Em Data2 (Pin 4)
122Data out, bit 2.
123.It Em Data3 (Pin 5)
124Handshake out.
125.It Em Data4 (Pin 6)
126Data out, bit 3.
127.It Em ERROR* (pin 15)
128Data in, bit 0.
129.It Em SLCT (pin 13)
130Data in, bit 1.
131.It Em PE (pin 12)
132Data in, bit 2.
133.It Em BUSY (pin 11)
134Data in, bit 3.
135.It Em ACK* (pin 10)
136Handshake in.
137.El
138.Pp
139When idle, all data lines are at zero. Each byte is signalled in four steps:
140sender writes the 4 most significant bits and raises the handshake line;
141receiver reads the 4 bits and raises its handshake to acknowledge;
142sender places the 4 least significant bits on the data lines and lowers
143the handshake; receiver reads the data and lowers its handshake.
144.Pp
145The packet format has a two-byte header, comprising the fixed values 0x08,
1460x00, immediately followed by the IP header and data.
147.Pp
148The start of a packet is indicated by simply signalling the first byte
149of the header. The end of the packet is indicated by inverting
150the data lines (ie. writing the ones-complement of the previous nibble
151to be transmitted) without changing the state of the handshake.
152.Pp
153Note that the end-of-packet marker assumes that the handshake signal and
154the data-out bits can be written in a single instruction - otherwise
155certain byte values in the packet data would falsely be interpreted
156as end-of-packet. This is not a problem for the PC printer port,
157but requires care when implementing this protocol on other equipment.
158
159.Ss Crynwr/Linux CLPIP mode
160The signal lines are used as follows:
161.Bl -tag -width dataxxxx(Pinxx)
162.It Em Data0 (Pin 2)
163Data out, bit 0.
164.It Em Data1 (Pin 3)
165Data out, bit 1.
166.It Em Data2 (Pin 4)
167Data out, bit 2.
168.It Em Data3 (Pin 5)
169Data out, bit 3.
170.It Em Data4 (Pin 6)
171Handshake out.
172.It Em ERROR* (pin 15)
173Data in, bit 0.
174.It Em SLCT (pin 13)
175Data in, bit 1.
176.It Em PE (pin 12)
177Data in, bit 2.
178.It Em ACK* (pin 10)
179Data in, bit 3.
180.It Em BUSY (pin 11)
181Handshake in.
182.El
183.Pp
184When idle, all data lines are at zero. Each byte is signalled in four steps:
185sender writes the 4 least significant bits and raises the handshake line;
186receiver reads the 4 bits and raises its handshake to acknowledge;
187sender places the 4 most significant bits on the data lines and lowers
188the handshake; receiver reads the data and lowers its handshake.
189[Note that this is the opposite nibble order to LPIP mode].
190.Pp
191Packet format is:
192.Bd -literal
193Length (least significant byte)
194Length (most significant byte)
19512 bytes of supposed MAC addresses (ignored by FreeBSD).
196Fixed byte 0x08
197Fixed byte 0x00
198<IP datagram>
199Checksum byte.
200.Ed
201.Pp
202The length includes the 14 header bytes, but not the length bytes themselves
203nor the checksum byte.
204.Pp
205The checksum is a simple arithmetic sum of all the bytes (again, including
206the header but not checksum or length bytes).
207.Fx
208calculates
209outgoing checksums, but does not validate incoming ones.
210.Pp
211The start of packet has to be signalled specially, since the line chosen
212for handshake-in cannot be used to generate an interrupt. The sender
213writes the value 0x08 to the data lines, and waits for the receiver
214to respond by writing 0x01 to its data lines. The sender then starts
215signalling the first byte of the packet (the length byte).
216.Pp
217End of packet is deduced from the packet length and is not signalled
218specially (although the data lines are restored to the zero, idle
219state to avoid spuriously indicating the start of the next packet).
220.Sh SEE ALSO
221.Xr ppbus 4 ,
222.Xr ppc 4 ,
223.Xr ifconfig 8
224.Sh BUGS
225Busy-waiting loops are used while handshaking bytes, (and worse still when
226waiting for the receiving system to respond to an interrupt for the start
227of a packet). Hence a fast system talking to a slow one will consume
228excessive amounts of CPU. This is unavoidable in the case of CLPIP mode
229due to the choice of handshake lines; it could theoretically be improved
230in the case of LPIP mode.
231.Pp
232Polling timeouts are controlled by counting loop iterations rather than
233timers, and so are dependent on CPU speed. This is somewhat stabilised
234by the need to perform (slow) ISA bus cycles to actually read the port.
2.\"
3.\" Copyright (c) 1996 A.R.Gordon, andrew.gordon@net-tel.co.uk
4.\" All rights reserved.
5.\"
6.\" Redistribution and use in source and binary forms, with or without
7.\" modification, are permitted provided that the following conditions
8.\" are met:
9.\" 1. Redistributions of source code must retain the above copyright
10.\" notice, this list of conditions and the following disclaimer.
11.\" 2. Redistributions in binary form must reproduce the above copyright
12.\" notice, this list of conditions and the following disclaimer in the
13.\" documentation and/or other materials provided with the distribution.
14.\" 3. All advertising materials mentioning features or use of this software
15.\" must display the following acknowledgement:
16.\" This product includes software developed by the University of
17.\" California, Berkeley and its contributors.
18.\" 4. Neither the name of the University nor the names of its contributors
19.\" may be used to endorse or promote products derived from this software
20.\" without specific prior written permission.
21.\"
22.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
23.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
24.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
26.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
27.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
28.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
29.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
30.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
31.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
32.\" SUCH DAMAGE.
33.\"
34.\" Id: man4.i386/lp.4,v 1.9 1999/02/14 12:06:16 nsouch Exp
35.\" $FreeBSD: head/share/man/man4/lp.4 68962 2000-11-20 18:41:33Z ru $
36.\"
37.Dd March 4, 1996
38.Os
39.Dt LP 4
40.Sh NAME
41.Nm lp
42.Nd printer port Internet Protocol driver
43.Sh SYNOPSIS
44.Nm ifconfig
45.Ar lp0
46.Ar myaddress hisaddress
47.Op Fl link0
48.Pp
49.Cd "device ppbus"
50.Cd "device plip"
51.Cd "device ppc0 at isa? port? irq 7"
52.Sh DESCRIPTION
53The
54.Nm
55driver allows a PC parallel printer port to be used as a
56point-to-point network interface between two similarly configured systems.
57Data is transferred 4 bits at a time, using the printer status lines for
58input: hence there is no requirement for special bidirectional hardware
59and any standard AT-compatible printer port with working interrupts may be used.
60.Pp
61During the boot process, for each
62.Nm plip
63device which is probed and has an interrupt assigned, a corresponding
64.Nm network
65device is created.
66.Pp
67Configuring an
68.Nm
69device with
70.Xr ifconfig 8
71causes the corresponding
72.Nm parallel port bus
73to be reserved for PLIP until the network interface is configured 'down'.
74.Pp
75The communication protocol is selected by the
76.Cm link0
77flag:
78.Bl -tag -width Fl
79.It Fl link0
80(default) Use
81.Fx
82mode (LPIP). This is the simpler of the two modes
83and therefore slightly more efficient.
84.It Cm link0
85Use Crynwr/Linux compatible mode (CLPIP). This mode has a simulated ethernet
86packet header, and is easier to interface to other types of equipment.
87.El
88.Pp
89The interface MTU defaults to 1500, but may be set to any value. Both ends
90of the link must be configured with the same MTU.
91.Ss Cable Connections
92The cable connecting the two parallel ports should be wired as follows:
93.Bd -literal
94 Pin Pin Description
95 2 15 Data0 -> ERROR*
96 3 13 Data1 -> SLCT
97 4 12 Data2 -> PE
98 5 10 Data3 -> ACK*
99 6 11 Data4 -> BUSY
100 15 2 ERROR* -> Data0
101 13 3 SLCT -> Data1
102 12 4 PE -> Data2
103 10 5 ACK* -> Data3
104 11 6 BUSY -> Data4
105 18-25 18-25 Ground
106.Ed
107.Pp
108Cables with this wiring are widely available as 'Laplink' cables, and
109are often coloured yellow.
110.Pp
111The connections are symmetric, and provide 5 lines in each direction (four
112data plus one handshake). The two modes use the same wiring, but make a
113different choice of which line to use as handshake.
114.Ss FreeBSD LPIP mode
115The signal lines are used as follows:
116.Bl -tag -width dataxxxx(Pinxx)
117.It Em Data0 (Pin 2)
118Data out, bit 0.
119.It Em Data1 (Pin 3)
120Data out, bit 1.
121.It Em Data2 (Pin 4)
122Data out, bit 2.
123.It Em Data3 (Pin 5)
124Handshake out.
125.It Em Data4 (Pin 6)
126Data out, bit 3.
127.It Em ERROR* (pin 15)
128Data in, bit 0.
129.It Em SLCT (pin 13)
130Data in, bit 1.
131.It Em PE (pin 12)
132Data in, bit 2.
133.It Em BUSY (pin 11)
134Data in, bit 3.
135.It Em ACK* (pin 10)
136Handshake in.
137.El
138.Pp
139When idle, all data lines are at zero. Each byte is signalled in four steps:
140sender writes the 4 most significant bits and raises the handshake line;
141receiver reads the 4 bits and raises its handshake to acknowledge;
142sender places the 4 least significant bits on the data lines and lowers
143the handshake; receiver reads the data and lowers its handshake.
144.Pp
145The packet format has a two-byte header, comprising the fixed values 0x08,
1460x00, immediately followed by the IP header and data.
147.Pp
148The start of a packet is indicated by simply signalling the first byte
149of the header. The end of the packet is indicated by inverting
150the data lines (ie. writing the ones-complement of the previous nibble
151to be transmitted) without changing the state of the handshake.
152.Pp
153Note that the end-of-packet marker assumes that the handshake signal and
154the data-out bits can be written in a single instruction - otherwise
155certain byte values in the packet data would falsely be interpreted
156as end-of-packet. This is not a problem for the PC printer port,
157but requires care when implementing this protocol on other equipment.
158
159.Ss Crynwr/Linux CLPIP mode
160The signal lines are used as follows:
161.Bl -tag -width dataxxxx(Pinxx)
162.It Em Data0 (Pin 2)
163Data out, bit 0.
164.It Em Data1 (Pin 3)
165Data out, bit 1.
166.It Em Data2 (Pin 4)
167Data out, bit 2.
168.It Em Data3 (Pin 5)
169Data out, bit 3.
170.It Em Data4 (Pin 6)
171Handshake out.
172.It Em ERROR* (pin 15)
173Data in, bit 0.
174.It Em SLCT (pin 13)
175Data in, bit 1.
176.It Em PE (pin 12)
177Data in, bit 2.
178.It Em ACK* (pin 10)
179Data in, bit 3.
180.It Em BUSY (pin 11)
181Handshake in.
182.El
183.Pp
184When idle, all data lines are at zero. Each byte is signalled in four steps:
185sender writes the 4 least significant bits and raises the handshake line;
186receiver reads the 4 bits and raises its handshake to acknowledge;
187sender places the 4 most significant bits on the data lines and lowers
188the handshake; receiver reads the data and lowers its handshake.
189[Note that this is the opposite nibble order to LPIP mode].
190.Pp
191Packet format is:
192.Bd -literal
193Length (least significant byte)
194Length (most significant byte)
19512 bytes of supposed MAC addresses (ignored by FreeBSD).
196Fixed byte 0x08
197Fixed byte 0x00
198<IP datagram>
199Checksum byte.
200.Ed
201.Pp
202The length includes the 14 header bytes, but not the length bytes themselves
203nor the checksum byte.
204.Pp
205The checksum is a simple arithmetic sum of all the bytes (again, including
206the header but not checksum or length bytes).
207.Fx
208calculates
209outgoing checksums, but does not validate incoming ones.
210.Pp
211The start of packet has to be signalled specially, since the line chosen
212for handshake-in cannot be used to generate an interrupt. The sender
213writes the value 0x08 to the data lines, and waits for the receiver
214to respond by writing 0x01 to its data lines. The sender then starts
215signalling the first byte of the packet (the length byte).
216.Pp
217End of packet is deduced from the packet length and is not signalled
218specially (although the data lines are restored to the zero, idle
219state to avoid spuriously indicating the start of the next packet).
220.Sh SEE ALSO
221.Xr ppbus 4 ,
222.Xr ppc 4 ,
223.Xr ifconfig 8
224.Sh BUGS
225Busy-waiting loops are used while handshaking bytes, (and worse still when
226waiting for the receiving system to respond to an interrupt for the start
227of a packet). Hence a fast system talking to a slow one will consume
228excessive amounts of CPU. This is unavoidable in the case of CLPIP mode
229due to the choice of handshake lines; it could theoretically be improved
230in the case of LPIP mode.
231.Pp
232Polling timeouts are controlled by counting loop iterations rather than
233timers, and so are dependent on CPU speed. This is somewhat stabilised
234by the need to perform (slow) ISA bus cycles to actually read the port.